openSUSE Build Service

Overview Repositories Revisions Requests Users Attributes Meta

Revisions of shorewall

Bruno Friedmann (bruno_friedmann) accepted request 728686 from

Bruno Friedmann (bruno_friedmann) about 5 years ago (revision 249)

- Update to bugfix minor 5.2.3.4
  + Update release documents.
  + Correct handling of multi-queue NFQUEUE as a policy.
  + Correct handling of multi-queue NFQUEUE as a macro parameter.
  + Make 'AUTOMAKE=No' the update default.
  + Correct the description of the 'bypass' NFQUEUE option in
    shorewall-rules(5).

buildservice-autocommit accepted request 694187 from

Bruno Friedmann (bruno_friedmann) over 5 years ago (revision 248)

baserev update by copy to link target

Bruno Friedmann (bruno_friedmann) accepted request 694183 from

Bruno Friedmann (bruno_friedmann) over 5 years ago (revision 247)

- Update to bugfix minor 5.2.3.3
  Previously, if an ipset was specified in an SPORT column, the
  compiler would raise an error similar to:
  ERROR: Invalid ipset name () /etc/shorewall/rules (line 44)
- Update to bugfix minor 5.2.3.2
  Shorewall 5.2 automatically converts an existing 'masq' file to an
  equivalent 'snat' file. Regrettably, Shorewall 5.2.3 broke that
  automatic update, such that the following error message was issued:
   Use of uninitialized value $Shorewall::Nat::raw::currentline in
   pattern match (m//) at /usr/share/shorewall/Shorewall/Nat.pm
   line 511, <$currentfile> line nnn. and the generated 'masq' 
  file contains only initial comments. That has been corrected.

buildservice-autocommit accepted request 680054 from

Bruno Friedmann (bruno_friedmann) over 5 years ago (revision 246)

baserev update by copy to link target

Bruno Friedmann (bruno_friedmann) accepted request 679933 from

Bruno Friedmann (bruno_friedmann) almost 6 years ago (revision 245)

- Update to bugfix minor 5.2.3.1 release
  + An issue in the implementation of policy file zone exclusion,
    released in 5.2.3 has been resolved. In the original release,
    if more than one zone was excluded then the following error was
    raised:
        ERROR: 'all' is not allowed in a source zone list
                etc/shorewall/policy (line ...)

buildservice-autocommit accepted request 678539 from

Bruno Friedmann (bruno_friedmann) almost 6 years ago (revision 244)

baserev update by copy to link target

Bruno Friedmann (bruno_friedmann) accepted request 678531 from

Bruno Friedmann (bruno_friedmann) almost 6 years ago (revision 243)

- Update to new 5.2.3 bugfix release
  http://www.shorewall.net/pub/shorewall/5.2/shorewall-5.2.3/releasenotes.txt
  This is the retirement of Tom Eastep see.
  https://sourceforge.net/p/shorewall/mailman/message/36589782/
- Removed module* in file section
- Clean-up changes and spec (trailing slashes)
- Update README.openSUSE

buildservice-autocommit accepted request 670881 from

Bruno Friedmann (bruno_friedmann) almost 6 years ago (revision 242)

baserev update by copy to link target

Bruno Friedmann (bruno_friedmann) accepted request 670879 from

Bruno Friedmann (bruno_friedmann) almost 6 years ago (revision 241)

- Update to new 5.2.2 bugfix release
  http://www.shorewall.net/pub/shorewall/5.2/shorewall-5.2.2/releasenotes.txt
  
- Packaging:
  + As seen with upstream recommend running shorewall update on
    all version update
  + to be done: run update automatically 

- Update to major version 5.2.1.4
  A lot of changes occurs since last package please consult
  http://www.shorewall.net/pub/shorewall/5.2/shorewall-5.2.1/releasenotes.txt
  and the know problem list at 
  http://www.shorewall.net/pub/shorewall/5.2/shorewall-5.2.1/known_problems.txt 
- Update your configuration shorewall update
- Packaging: renew spec file with spec-cleaner

buildservice-autocommit accepted request 596753 from

Bruno Friedmann (bruno_friedmann) over 6 years ago (revision 240)

baserev update by copy to link target

Bruno Friedmann (bruno_friedmann) accepted request 596669 from

Bruno Friedmann (bruno_friedmann) over 6 years ago (revision 239)

- Changes in 5.1.12.3
  Problems Corrected:
  When 'reset' and 'dst' were specified to the IfEvent action,
  the action would incorrectly attempt to reset the event for the
  SOURCE IP address rather than the DEST address. That has been
  corrected.

buildservice-autocommit accepted request 587570 from

Bruno Friedmann (bruno_friedmann) over 6 years ago (revision 238)

baserev update by copy to link target

Bruno Friedmann (bruno_friedmann) accepted request 587096 from

Bruno Friedmann (bruno_friedmann) over 6 years ago (revision 237)

- spec : 
  + Minimal changes with spec-cleaner
  + Stop conflicting with other firewall (SuSEFirewall2, firewalld)
    User can have several management tools, and it help preparing
    a migration
- Run shorewall(6) update -A to update your configurations
  Check and adapt them before restarting.
- Changes in 5.1.12.3
  + Update release documents.
  + Ensure that mutex gets released at exit.
- Changes in 5.1.12.2
  + Alter documentation to prefer ';;' over ';' in INLINE and 
    IP[6]TABLES rules.
  + Make 'update' convert ';' to ';;' in INLINE, IPTABLES and 
    IP6TABLES rules.
  + Correct typo that resulted in an "unknown function" Perl 
    diagnostic.
  + Correct "Invalid policy" message.
  + Fix omitted SYN limiting.
- Changes in 5.1.12.1
  + Replace macro.SSDPServer with corrected macro.SSDPserver.
- Changes in 5.1.12 Final
  + Update release documents.
  + Add INLINE_MATCHES=Yes to the deprecated list.
- Changes in 5.1.12 RC 1
  + Update release documents.
  + Minor performance enhancements to Optimize Category 8.
  + Always report IPSET_MATCH.
- Changes in 5.1.12 Beta 2
  + Delete undocumented OPTIMIZE_USE_FIRST option.

buildservice-autocommit accepted request 542468 from

Bruno Friedmann (bruno_friedmann) about 7 years ago (revision 236)

baserev update by copy to link target

Bruno Friedmann (bruno_friedmann) accepted request 541200 from

Bruno Friedmann (bruno_friedmann) about 7 years ago (revision 235)

- spec : 
  + use new %_fillupdir macro with env DIRFILLUP in build
    * Redone patches *-fillup-install.patch to use ${DIRFILLUP}
    * use new %_fillupdir macro in files
  + change require perl to perl-base
  + Added conflict with firewalld
  + Refresh list of files and modules
- Run shorewall(6) update -A to update your configurations
  Check and adapt them before restarting.
- 5.1.8.1 release - Recommended action : 
  + Update release documents
  + Make persistent routes and rules independent of 'autosrc'
  + Correct 'delete_default_routes()'
  + Delete default routes from 'main' when a fallback provider is
    successfully enabled
  + Don't restore default route when a fallback provider is enabled
  + Issue a warning when 'persistent' is used with 
    RESTORE_DEFAULT_ROUTE=Yes
  + Don't dump SPD entries for the other address family
  + Fix 'persistent' provider issues
  + Treat LOG_TARGET the same as all other capabilities
  + Allow merging of rules with IPSEC policies
  
- 5.1.7.2 release
- 5.1.6 release
...

buildservice-autocommit accepted request 518886 from

Bruno Friedmann (bruno_friedmann) over 7 years ago (revision 234)

baserev update by copy to link target

Bruno Friedmann (bruno_friedmann) accepted request 518885 from

Bruno Friedmann (bruno_friedmann) over 7 years ago (revision 233)

buildservice-autocommit accepted request 516780 from

Bruno Friedmann (bruno_friedmann) over 7 years ago (revision 232)

baserev update by copy to link target

Bruno Friedmann (bruno_friedmann) accepted request 516777 from

Olaf Hering (olh) over 7 years ago (revision 231)

- Update filename in /var/adm/update-messages to match documentation,
  and build-compare pattern

buildservice-autocommit accepted request 509976 from

Bruno Friedmann (bruno_friedmann) over 7 years ago (revision 230)

baserev update by copy to link target

Displaying revisions 41 - 60 of 289

Places

Revisions of shorewall

Places