FPGA firmware for SDR radio receiver
http://nuand.com/
The FPGA firmware for bladeRF USB 3.0 Superspeed Software Defined Radio.
This package is needed if the firmware is to be loaded at board initialization.
- Devel package for openSUSE:Factory:NonFree
-
1
derived packages
- Links to openSUSE:...:NonFree / bladeRF-f...firmware
- Download package
-
Checkout Package
osc -A https://api.opensuse.org checkout hardware:sdr/bladeRF-fpga-firmware && cd $_ - Create Badge
Refresh
Refresh
Source Files
| Filename | Size | Changed |
|---|---|---|
| _link | 0000000132 132 Bytes | |
| bladeRF-fpga-firmware.changes | 0000003666 3.58 KB | |
| bladeRF-fpga-firmware.spec | 0000002426 2.37 KB | |
| hostedx115.rbf | 0003571462 3.41 MB | |
| hostedx40.rbf | 0001191788 1.14 MB | |
| hostedxA4.rbf | 0002632660 2.51 MB | |
| hostedxA9.rbf | 0012858972 12.3 MB | |
| wlanxA9.rbf | 0012858972 12.3 MB |
Revision 6 (latest revision is 10)
Martin Pluskal (pluskalm)
accepted
request 863383
from
Martin Hauke (mnhauke)
(revision 6)
- Update to version 0.12.0
* Add packet mode. The HDL fabric is able to exchange variable
length packets with the host
* Added packet_generator as an example for how to send packets
to the host
* Added bladeRF 2.0 micro headless example variant "foxhunt"
* Fix metadata related arithmetic and logic
- Update to version 0.11.0
* Increase FIFO buffer sizes for bladeRF 2.0
* Fix underflow and overflow issues in metadata code
* Refactor RFIC code for bladeRF 2.0
* Allow quicktune to control XB gpio register for XB-200
- Update to version 0.10.2
This version improves the FPGA-based tuning support on the
bladeRF2, adding quick tuning, a standby state (initialized but
idle), and defining user space for API commands.
* bladeRF2: fix RF path selection for quick retune
* bladeRF2: FPGA tuning: add FASTLOCK command
* bladeRF2: FPGA tuning: add standby (warm idle) state
* bladeRF2: FPGA tuning: define user-defined command space
* bladeRF2: add FPGA-based tuning
* bladeRF2: improved headless functionality
* bladeRF2: increased Nios II RAM size to 128kB
* bladeRF2: add fastlock functions
- Update to version 0.9.0
* bladeRF: hosted: fix typo in toggle_led1
* bladeRF: move AGC SPI driver into 80 MHz clock domain
* bladeRF: timing improvements
* build: Cygwin compatibility
* bladeRF: adsb: adjust build and FIFO type to match
Comments 0