- Update to v4.21.0-1 (jsc#PED-911, jsc#PED-1188)
  - Generic
    - Added support for NVIDIA ConnectX-7 adapter cards.
    - Added additional Flash support for ConnectX-4 Lx and ConnectX-5 adapter cards.
    - Python 2.x - Python 2.x is now end-of-life and no longer supported by MFT.
  - mstfwreset
    - For some configuration changes done using mstconfig, PCI rescan by the user is required.
    - Added a new reset-type ("NIC only reset") to mstfwreset which is applicable only
      to SmartNIC devices. The new reset-type is also the new default for SmartNIC devices.
      In case of reset-type is set to "NIC only reset", mstfwreset will not reset the internal host.
  - mstflint
    - Querying Vendor Specific Firmware Information from an Nvidia AOC / Transceiver Querying
      a firmware cable transceiver is now done using the "mstflint" tool.
    - cable/transceivers burning commands provide now validation and extract version from the image files.
    - Modified the output of the PCIe link information, removed the device status filed.
    - When downgrading to a firmware version that does not support the flash type of
      the device, mstflint will present the user a clear error of such scenario.
  - mlxconfig
    - Enable the users to apply token via MTUSB connected device.
  - mstresourceparse
    - mstresourceparse will present the union fields according to the selector.
     Unions that do not have a selector, will be presented with all the fields as before.
  - mstresourcedump
    - mstresourcedump tool now runs ~10X faster in mem mode with output to binary file.
    - Updated the "--virtual-hca-id" value output to be in a hexadecimal format.
    - Memory-Mode, data field is now transferred via memory instead of the resource-dump register.
  - mstlink
    - Removed irrelevant "eye" info fields in the output of the "show eye" command for PCIe links.
    - Removed the device status field from the PCIe info section.
    - Added support for "show_eye" command for ConnectX-7 over PCIe links.
    - Re-formatted the serdes Tx parameter layout in the "show_sedes_tx" command.
    - Added support for the PRBS test mode of Active/Optical CMIS modules.
    - Added support for additional configuration flags of the module control parameters.
    - Added support for new PRBS TX/RX patterns (--tx_prbs <tx_prbs_mode> & --rx_prbs <rx_prbs_mode>).
    - Added new show counters for 16nm devices. To see them run the "show_counter" command.
    - Extended the list of the cable information received for 16nm devices when running the "show_module" command.
    - Extended the information collection for 7nm and 16nm devices. See "--amber_collect" flag.
    - Extended the list of the cable information (LOL, LOS, FSM, and module status)
      for CMIS when running the "show_module" command.
  - mstdump
    - Added an optional parameter of the CSV path (-c | --csv)
     which loads the provides the CSV from a fixed location as a DB instead of the default one.
  - mstprivhost
    - Added a new flag to query all hosts status from the embedded Arm side for Multi-host systems.
- Refresh patches against latest sources:
  - Remove-date-time-info-from-build.patch
  - Fix-gcc7-and-gcc8.patch

• Files Changed
• Browse Source