File u-boot-colibrit20.changes of Package u-boot

Overview Repositories Revisions Requests Users Attributes Meta

File u-boot-colibrit20.changes of Package u-boot (Revision 508ee552ebb5c7e0a3bbf50d29d1b28a)

Currently displaying revision 508ee552ebb5c7e0a3bbf50d29d1b28a , Show latest

-------------------------------------------------------------------
Tue Jun 14 22:00:00 UTC 2016 - dmueller@suse.com

- Patch queue updated from git://github.com/openSUSE/u-boot.git tumbleweed
* Patches dropped:
  0007-efi_loader-Allow-boards-to-implemen.patch
  0008-ARM-bcm283x-Implement-EFI-RTS-reset.patch
  0009-arm-Introduce-setjmp-longjmp.patch
  0010-efi_loader-Add-exit-support.patch
  0011-efi_loader-Add-DM_VIDEO-support.patch
  0012-efi_loader-gop-Expose-fb-when-32bpp.patch
  0013-bcm2835-video-Map-frame-buffer-as-3.patch
  0014-bcm2835-Reserve-the-spin-table-in-e.patch

-------------------------------------------------------------------
Mon Jun  6 22:07:59 UTC 2016 - agraf@suse.com

- Add efifb support for RPi
- Fix spin table spill on Rpi
- Patch queue updated from git://github.com/openSUSE/u-boot.git tumbleweed
* Patches added:
  0011-efi_loader-Add-DM_VIDEO-support.patch
  0012-efi_loader-gop-Expose-fb-when-32bpp.patch
  0013-bcm2835-video-Map-frame-buffer-as-3.patch
  0014-bcm2835-Reserve-the-spin-table-in-e.patch

-------------------------------------------------------------------
Mon Jun  6 06:56:34 UTC 2016 - agraf@suse.com

- Add RTS reboot for RPi
- Add EFI exit support
- Patch queue updated from git://github.com/openSUSE/u-boot.git tumbleweed
* Patches added:
  0007-efi_loader-Allow-boards-to-implemen.patch
  0008-ARM-bcm283x-Implement-EFI-RTS-reset.patch
  0009-arm-Introduce-setjmp-longjmp.patch
  0010-efi_loader-Add-exit-support.patch

-------------------------------------------------------------------
Fri Jun  3 11:18:13 UTC 2016 - agraf@suse.com

- Disable EFI GOP fb_addr, so Linux doesn't use it
- Move to git based patch queue workflow
- Patch queue updated from git://github.com/openSUSE/u-boot.git tumbleweed
* Patches dropped:
  0001-video-ipu-Fix-build-with-hard-float-ARM-toolchain.-I.patch
  0001-XXX-openSUSE-XXX-Load-dtb-from-partition-2.patch
  0002-XXX-openSUSE-XXX-omap3-Move-to-distro-bootcmd.patch
* Patches added:
  0001-XXX-openSUSE-XXX-Load-dtb-from-part.patch
  0002-XXX-openSUSE-XXX-omap3-Move-to-dist.patch
  0003-Revert-Revert-omap3-Use-raw-SPL-by-.patch
  0004-video-ipu-Fix-build-with-hard-float.patch
  0005-efi_loader-Clean-up-system-table-on.patch
  0006-efi_loader-gop-Don-t-expose-fb-addr.patch

-------------------------------------------------------------------
Wed May 18 13:07:24 UTC 2016 - afaerber@suse.de

- Fix rpi3 installation location

-------------------------------------------------------------------
Wed May 18 12:22:31 UTC 2016 - guillaume@opensuse.org

- Add 0001-video-ipu-Fix-build-with-hard-float-ARM-toolchain.-I.patch
  to fix build on iMX boards (with hard-float toolchains)

-------------------------------------------------------------------
Tue May 17 12:53:24 UTC 2016 - guillaume@opensuse.org

- Update to 2016.05
- Remove upstreamed patch:
  * 0003-exynos-Set-CNTFRQ.patch

-------------------------------------------------------------------
Wed May  4 20:22:57 UTC 2016 - afaerber@suse.de

- Package Marvell SPL for ClearFog
- Tidy package summaries and descriptions
* Fix spelling of U-Boot
* Don't assume ARM

-------------------------------------------------------------------
Thu Apr 28 15:46:09 UTC 2016 - agraf@suse.com

- Update to 2016.05-rc3
  - Removed patches:
    * 0004-iso-Make-little-endian-and-64bit-safe.patch
    * 0005-iso-Start-with-partition-1.patch
    * 0006-iso-Allow-512-byte-sector-size.patch
    * 0007-efi_loader-Split-drive-add-into-function.patch
    * 0008-efi_loader-Add-el-torito-support.patch
    * 0009-efi_loader-Pass-file-path-to-payload.patch
    * 0010-efi_loader-Increase-path-string-to-32-characters.patch
    * 0011-distro-Enable-iso-partition-code.patch
    * 0012-efi_loader-Use-system-fdt-as-fallback.patch
    * 0013-efi_loader-Put-fdt-into-convenient-location.patch
    * 0014-efi_loader-Expose-ascending-efi-memory-map.patch
    * 0015-efi_loader-Always-flush-in-cache-line-size-granulari.patch
    * 0016-efi_loader-Handle-memory-overflows.patch
    * 0017-ARM-rpi-fix-64-bit-CONFIG_SYS_TEXT_BASE.patch

-------------------------------------------------------------------
Fri Apr 15 21:50:37 UTC 2016 - agraf@suse.com

- Add patch to fix RPi3 aarch64 mode with recent firmware
  * 0017-ARM-rpi-fix-64-bit-CONFIG_SYS_TEXT_BASE.patch

-------------------------------------------------------------------
Wed Apr 13 13:55:13 UTC 2016 - agraf@suse.com

- Move patch queue to https://github.com/openSUSE/u-boot.git tumbleweed
  - Removed old patches:
    * 0001-iso-Make-little-endian-and-64bit-safe.patch
    * 0002-iso-Start-with-partition-1.patch
    * 0003-iso-Allow-512-byte-sector-size.patch
    * 0004-efi_loader-Split-drive-add-into-function.patch
    * 0005-efi_loader-Add-el-torito-support.patch
    * 0006-efi_loader-Pass-file-path-to-payload.patch
    * 0007-efi_loader-Increase-path-string-to-32-characters.patch
    * 0008-distro-Enable-iso-partition-code.patch
    * 0009-efi_loader-Use-system-fdt-as-fallback.patch
    * 0010-efi_loader-Put-fdt-into-convenient-location.patch
    * 0011-efi_loader-Expose-ascending-efi-memory-map.patch
    * 0012-efi_loader-Always-flush-in-cache-line-size-granulari.patch
    * u-boot-exynos.patch
    * efi-default-env.patch
    * omap3-Move-to-distro-bootcmd.patch
  - Added new patches:
    * 0001-XXX-openSUSE-XXX-Load-dtb-from-partition-2.patch
    * 0002-XXX-openSUSE-XXX-omap3-Move-to-distro-bootcmd.patch
    * 0003-exynos-Set-CNTFRQ.patch
    * 0004-iso-Make-little-endian-and-64bit-safe.patch
    * 0005-iso-Start-with-partition-1.patch
    * 0006-iso-Allow-512-byte-sector-size.patch
    * 0007-efi_loader-Split-drive-add-into-function.patch
    * 0008-efi_loader-Add-el-torito-support.patch
    * 0009-efi_loader-Pass-file-path-to-payload.patch
    * 0010-efi_loader-Increase-path-string-to-32-characters.patch
    * 0011-distro-Enable-iso-partition-code.patch
    * 0012-efi_loader-Use-system-fdt-as-fallback.patch
    * 0013-efi_loader-Put-fdt-into-convenient-location.patch
    * 0014-efi_loader-Expose-ascending-efi-memory-map.patch
    * 0015-efi_loader-Always-flush-in-cache-line-size-granulari.patch
- Add patch to fix Jetson TK1
  * 0016-efi_loader-Handle-memory-overflows.patch

-------------------------------------------------------------------
Wed Apr 13 13:16:42 UTC 2016 - guillaume@opensuse.org

- Use released source archive instead of manually built archive

-------------------------------------------------------------------
Tue Apr 12 08:38:49 UTC 2016 - agraf@suse.com

- Update to 2016.05-rc1
- Remove upstreamed patches:
  * efi.patch
  * efi2.patch
  * efi_loader-Call-fdt-preparation-functions.patch
  * efi_loader-Pass-proper-device-path-in-on-boot.patch
  * efi_loader-Provide-icache-flush-stub.patch
  * efi-map-fdt-as-reserved.patch
  * rpi3.patch
- Add EFI fixes and iso boot backports:
  * 0001-iso-Make-little-endian-and-64bit-safe.patch
  * 0002-iso-Start-with-partition-1.patch
  * 0003-iso-Allow-512-byte-sector-size.patch
  * 0004-efi_loader-Split-drive-add-into-function.patch
  * 0005-efi_loader-Add-el-torito-support.patch
  * 0006-efi_loader-Pass-file-path-to-payload.patch
  * 0007-efi_loader-Increase-path-string-to-32-characters.patch
  * 0008-distro-Enable-iso-partition-code.patch
  * 0009-efi_loader-Use-system-fdt-as-fallback.patch
  * 0010-efi_loader-Put-fdt-into-convenient-location.patch
  * 0011-efi_loader-Expose-ascending-efi-memory-map.patch
  * 0012-efi_loader-Always-flush-in-cache-line-size-granulari.patch

-------------------------------------------------------------------
Sun Apr  3 04:40:53 UTC 2016 - afaerber@suse.de

- Package .img for firefly-rk3288
- Package firefly-rk3288 SPL images. Generate them here so that we
  notice early if the size constraints are ever again not met.

-------------------------------------------------------------------
Sat Apr  2 23:08:53 UTC 2016 - afaerber@suse.de

- Package spl/u-boot-spl for new tegra-uboot-flasher-scripts

-------------------------------------------------------------------
Fri Apr  1 17:07:55 UTC 2016 - afaerber@suse.de

- Add clearfog

-------------------------------------------------------------------
Tue Mar 15 08:47:35 UTC 2016 - guillaume@opensuse.org

- Update to 2016.03
- Remove upstreamed patch:
  * omap3-Use-raw-SPL-by-default-for-mmc1.patch

-------------------------------------------------------------------
Sun Mar 13 21:48:46 UTC 2016 - dmueller@suse.com

- add support for Raspberry Pi 3 (rpi3.patch)

-------------------------------------------------------------------
Wed Mar  9 22:50:22 UTC 2016 - agraf@suse.com

- Fix missing 0-terminator in efi patch, breaking boot.scr boot

-------------------------------------------------------------------
Sat Mar  5 22:02:18 UTC 2016 - afaerber@suse.de

- Non-free licensed Marvell code has long been removed.
  Drop obsolete drop-marvell.patch (bsc#773824)
- Fix indentation of Patch6 in u-boot.spec.in

-------------------------------------------------------------------
Thu Mar  3 15:02:37 UTC 2016 - agraf@suse.com

- EFI: Map fdt as reserved
  * efi-map-fdt-as-reserved.patch

-------------------------------------------------------------------
Thu Mar  3 12:52:17 UTC 2016 - agraf@suse.com

- Fix OMAP3 boards to load u-boot from raw sector offset
  * omap3-Use-raw-SPL-by-default-for-mmc1.patch

-------------------------------------------------------------------
Wed Mar  2 23:46:44 UTC 2016 - agraf@suse.com

- Allow grub2 to find its config
  * efi_loader-Pass-proper-device-path-in-on-boot.patch
- Fix Raspberry Pi 1 build
  * efi_loader-Provide-icache-flush-stub.patch

-------------------------------------------------------------------
Wed Mar  2 10:03:56 UTC 2016 - guillaume@opensuse.org

- Update to 2016.03-rc3
- Remove upstreamed patches:
  * 0001-spl-if-MMCSD_MODE_RAW-fails-try-MMCSD_MODE_FS-if-ava.patch

-------------------------------------------------------------------
Tue Mar  1 23:06:57 UTC 2016 - agraf@suse.com

- Move omap3 to distro bootcmd (to enable efi boot on beagle-xm)
  * omap3-Move-to-distro-bootcmd.patch
- Add EFI patch to support FDT fixups (patches in RAM size)
  * efi_loader-Call-fdt-preparation-functions.patch

-------------------------------------------------------------------
Mon Feb 29 23:28:15 UTC 2016 - agraf@suse.com

- Patch the default u-boot env to search for dtb in /boot at part 2
  * efi-default-env.patch

-------------------------------------------------------------------
Sun Feb 28 11:02:04 UTC 2016 - agraf@suse.com

- Use $fdtfile rather than $fdt_name everywhere:
  * efi2.patch

-------------------------------------------------------------------
Sat Feb 27 13:20:29 UTC 2016 - agraf@suse.com

- Add EFI support about to move upstream:
  * efi.patch

-------------------------------------------------------------------
Mon Feb 22 13:32:31 UTC 2016 - guillaume@opensuse.org

- Update to 2016.03-rc2
- Remove upstreamed patches:
  * U-Boot-am335x_evm-Don-t-undef-CONFIG_BOOTDELAY.patch
  * 0001-udoo-use-load-instead-of-fatload.patch
- Refresh drop-marvell.patch
- Remove dropped doc from file list: doc/README.Modem

-------------------------------------------------------------------
Wed Feb 17 08:16:15 UTC 2016 - guillaume@opensuse.org

- Add a patch to fix boot on partition when raw boot mode is also 
  available:
  * 0001-spl-if-MMCSD_MODE_RAW-fails-try-MMCSD_MODE_FS-if-ava.patch

-------------------------------------------------------------------
Wed Feb 17 08:15:52 UTC 2016 - guillaume@opensuse.org

- Add am335x_boneblack

-------------------------------------------------------------------
Sat Feb 13 14:56:43 UTC 2016 - afaerber@suse.de

- Enable Hyundai_A7HD, superseding :Contrib:sunxi package

-------------------------------------------------------------------
Thu Feb  9 13:02:26 UTC 2016 - afaerber@suse.de

- Adjust installation path for qemu-ppce500 to replace qemu-ppc's
* Pull in qemu (not qemu-ppc) for directory ownership

-------------------------------------------------------------------
Tue Feb  9 00:03:18 UTC 2016 - afaerber@suse.de

- Add Jetson TX1 board (p2371-2180)
- Fix indentation of last Patch line in .spec.in to match .spec

-------------------------------------------------------------------
Mon Feb  1 19:35:45 UTC 2016 - agraf@suse.com

- Add patch to fix exynos armv7 kvm support
  * adds u-boot-exynos.patch

-------------------------------------------------------------------
Tue Jan 19 14:15:58 UTC 2016 - afaerber@suse.de

- Prepare for non-/boot installation directories
* For /boot/vc pull in raspberrypi-firmware package

-------------------------------------------------------------------
Fri Jan 15 21:19:43 UTC 2016 - oscar@naiandei.net

- Add udoo (dual and quad) boards
  * adds 0001-udoo-use-load-instead-of-fatload.patch

-------------------------------------------------------------------
Thu Jan 14 15:43:36 UTC 2016 - afaerber@suse.de

- Add qemu-ppce500, to replace u-boot.e500 blob in qemu package
* Override CROSS_COMPILE variable to use native gcc

-------------------------------------------------------------------
Wed Jan 13 14:07:32 UTC 2016 - guillaume@opensuse.org

- Update to 2016.01

-------------------------------------------------------------------
Mon Jan 11 11:08:50 UTC 2016 - guillaume@opensuse.org

- Update to 2016.01-rc4

-------------------------------------------------------------------
Mon Dec 28 13:50:10 UTC 2015 - guillaume@opensuse.org

- Update to 2016.01-rc3

-------------------------------------------------------------------
Sun Dec 20 20:56:54 UTC 2015 - afaerber@suse.de

- Suppress stripping debug info - it affects u-boot-jetson-tk1
- Install rpi and rpi2 binaries to /boot/vc

-------------------------------------------------------------------
Tue Dec 15 09:27:03 UTC 2015 - guillaume@opensuse.org

- Backport U-Boot-am335x_evm-Don-t-undef-CONFIG_BOOTDELAY.patch
  to fix bootdelay on Beaglebone board

-------------------------------------------------------------------
Tue Dec 15 09:15:30 UTC 2015 - guillaume@opensuse.org

- Add orangepi_pc board

-------------------------------------------------------------------
Fri Dec 11 09:23:17 UTC 2015 - guillaume@opensuse.org

- Add support to am57xx_evm (beagle_x15 with u-boot DT)

-------------------------------------------------------------------
Fri Dec 11 09:08:25 UTC 2015 - guillaume@opensuse.org

- Update to 2016.01-rc2:
- Rename 'beagle_x15' to 'am57xx_evm_nodt' to follow upstream
- Remove upstreamed patch:
  * U-Boot-1-2-usb-host-xhci-omap-fix-build-break.patch

-------------------------------------------------------------------
Wed Nov 25 09:38:56 UTC 2015 - guillaume@opensuse.org

- Update to 2016.01-rc1
- Remove upstreamed patches:
  * 0001-configs-Use-config_distro_defaults.h-in-ti_armv7_com.patch
  * 0001-mx6cuboxi-use-load-instead-of-fatload.patch (no more needed)
  * U-Boot-image.c-Fix-non-Android-booting-with-ramdisk-and-or-device-tree.patch
- Update drop-marvell.patch

-------------------------------------------------------------------
Sun Nov 15 13:11:56 UTC 2015 - matwey.kornilov@gmail.com

- Backport 0001-configs-Use-config_distro_defaults.h-in-ti_armv7_com.patch

-------------------------------------------------------------------
Sat Nov 14 15:03:05 UTC 2015 - tbechtold@suse.com

- 0001-mx6cuboxi-use-load-instead-of-fatload.patch
  for cubox-i use load instead of fatload

-------------------------------------------------------------------
Tue Nov  3 08:14:57 UTC 2015 - matwey.kornilov@gmail.com

- Fix am335x booting
  * U-Boot-image.c-Fix-non-Android-booting-with-ramdisk-and-or-device-tree.patch

-------------------------------------------------------------------
Wed Oct 21 08:16:32 UTC 2015 - guillaume@opensuse.org

- Add Beagle x15 support
- Fix build for Beagle x15: 
  * U-Boot-1-2-usb-host-xhci-omap-fix-build-break.patch

-------------------------------------------------------------------
Tue Oct 20 11:32:30 UTC 2015 - guillaume@opensuse.org

- Update to 2015.10
- Remove upstreamed patches:
  * 0001-odroid-replace-fatload-with-load-to-be-able-to-use-E.patch
  * 0002-odroid-Add-boot-script-boot.scr-support.patch

-------------------------------------------------------------------
Tue Oct 13 06:58:38 UTC 2015 - guillaume@opensuse.org

- Update to 2015.10-rc5
- Remove upstreamed patch:
  * arndale-apply-cortex-a15-erratas.patch

-------------------------------------------------------------------
Thu Oct  8 09:27:15 UTC 2015 - guillaume@opensuse.org

- Add boot script support to odroid board:
  * 0001-odroid-replace-fatload-with-load-to-be-able-to-use-E.patch
  * 0002-odroid-Add-boot-script-boot.scr-support.patch

-------------------------------------------------------------------
Mon Oct  5 18:04:28 UTC 2015 - afaerber@suse.de

- Add spring and firefly-rk3288 for armv7hl
  * Break overly long armv7_boards line in pre_checkin.sh
  * Clean up case'ing of defconfigs to avoid excessive wildcards
- Prepare for adding qemu-ppce500 for ppc
  * Allow for more than two exclusive architectures (cleanup)

-------------------------------------------------------------------
Mon Oct  5 11:42:08 UTC 2015 - dmueller@suse.com

- add arndale-apply-cortex-a15-erratas.patch

-------------------------------------------------------------------
Thu Oct  1 16:41:38 UTC 2015 - guillaume.gardet@opensuse.org

- Update to 2015.10-rc4
- Update drop-marvell.patch

-------------------------------------------------------------------
Sat Sep 12 12:22:53 UTC 2015 - guillaume@opensuse.org

- Use u-boot-2015.10-rc3.tar.bz2 package provided on FTP instead of
  packaging it manually.

-------------------------------------------------------------------
Tue Sep  8 08:52:56 UTC 2015 - guillaume@opensuse.org

- Update to 2015.10-rc3

-------------------------------------------------------------------
Wed Sep  2 16:28:02 UTC 2015 - guillaume@opensuse.org

- Add odroid and odroid-xu3

-------------------------------------------------------------------
Tue Aug 18 08:31:48 UTC 2015 - guillaume@opensuse.org

- Update to 2015.10-rc2 
- Remove upstreamed patch:
  * jetson-tk1-gpu-1.patch
  * jetson-tk1-gpu-2.patch

-------------------------------------------------------------------
Thu Aug  6 12:40:58 UTC 2015 - guillaume@opensuse.org

- Update to 2015.10-rc1
- Remove upstreamed patch:
  * mx53loco-bootscr.patch
- Update patches:
  * jetson-tk1-gpu-1.patch
  * jetson-tk1-gpu-2.patch

-------------------------------------------------------------------
Wed Aug  5 13:36:45 UTC 2015 - dmueller@suse.com

- add mx6cuboxi

-------------------------------------------------------------------
Wed Jul 22 22:38:23 UTC 2015 - afaerber@suse.de

- jetson-tk1-gpu-1.patch,
  jetson-tk1-gpu-2.patch: Enable the Tegra124 GPU device tree node

-------------------------------------------------------------------
Mon Jul 20 10:45:39 UTC 2015 - afaerber@suse.de

- Add u-boot-jetson-tk1

-------------------------------------------------------------------
Fri Jul 17 06:42:37 UTC 2015 - afaerber@suse.de

- Add u-boot-merriia80optimus

-------------------------------------------------------------------
Wed Jul 15 13:05:24 UTC 2015 - guillaume@opensuse.org

- Update to 2015.07

-------------------------------------------------------------------
Tue Jun 30 07:34:49 UTC 2015 - guillaume@opensuse.org

- Update to 2015.07-rc3
- Remove upstreamed patches:
  * enable_spl_ext_support_for_ti_armv7.patch
  * fix_slow_mmc_on_rpi.patch

-------------------------------------------------------------------
Thu Jun 18 12:07:10 UTC 2015 - guillaume@opensuse.org

- Add fix_slow_mmc_on_rpi.patch to speed up MMC load on RPi
- Rework patches (to be upstreamable):
  * enable_spl_ext_support_for_ti_armv7.patch
  * mx53loco-bootscr.patch
- Remove fix_beagle_spl_build.patch

-------------------------------------------------------------------
Wed Jun 10 10:07:23 UTC 2015 - guillaume@opensuse.org

- Update to 2015.07-rc2
- Update drop-marvell.patch

-------------------------------------------------------------------
Wed May 27 10:07:49 UTC 2015 - guillaume@opensuse.org

- Update to 2015.07-rc1:
- Update drop-marvell.patch
- Remove no more needed add_snow_usb_boot.patch

-------------------------------------------------------------------
Wed Apr 29 07:51:25 UTC 2015 - dmueller@suse.com

- adjust copyright headers

-------------------------------------------------------------------
Thu Apr 16 08:34:11 UTC 2015 - guillaume@opensuse.org

- update to 2015.04
- Remove upstreamed patch: 
  0001-Exynos-Clock-Fix-exynos5_get_periph_rate-for-I2C.patch
- Follow upstream board rename colibri_t20_iris => colibri_t20

-------------------------------------------------------------------
Sun Apr 12 19:49:41 UTC 2015 - xxxxxmichl@googlemail.com

- Added support for A13-OLinuXino, A13-OLinuXino-MICRO,
  A20-OLinuXino-MICRO and A20-OLinuXino-LIME from
  www.olimex.com

-------------------------------------------------------------------
Thu Apr  9 07:56:40 UTC 2015 - guillaume@opensuse.org

- Remove u-boot-vexpressaemv8a (dropped upstream and we now use EFI)

-------------------------------------------------------------------
Thu Apr  2 09:13:49 UTC 2015 - guillaume@opensuse.org

- update to 2015.04-rc5

-------------------------------------------------------------------
Mon Mar 23 08:39:40 UTC 2015 - guillaume@opensuse.org

- update to 2015.04-rc4

-------------------------------------------------------------------
Wed Mar  4 15:51:55 UTC 2015 - guillaume@opensuse.org

- Add 0001-Exynos-Clock-Fix-exynos5_get_periph_rate-for-I2C.patch
  to fix keyboard on Chromebook

-------------------------------------------------------------------
Wed Mar  4 15:46:52 UTC 2015 - guillaume@opensuse.org

- update to 2015.04-rc3
- update patch: drop-marvell.patch

-------------------------------------------------------------------
Thu Feb 26 16:48:35 UTC 2015 - guillaume@opensuse.org

- Update add_snow_usb_boot.patch to boot on USB2 instead of USB3

-------------------------------------------------------------------
Wed Feb 25 15:47:07 UTC 2015 - guillaume@opensuse.org

- Remove unneeded fix_snow_config.patch

-------------------------------------------------------------------
Tue Feb 24 09:48:50 UTC 2015 - guillaume@opensuse.org

- Add rpi2 armv7 board

-------------------------------------------------------------------
Fri Feb 20 12:31:38 UTC 2015 - guillaume@opensuse.org

- Update to 2015.04-rc2

-------------------------------------------------------------------
Fri Feb 20 10:04:14 UTC 2015 - guillaume@opensuse.org

- Update to 2015.04-rc1
  * Remove upstreamed patch pcm051-bootscr.patch
  * Remove no more used patch fix_bootpart_snow_only.patch (now u-boot 
  scan all known partitions, so no need to set a different boot partition)

-------------------------------------------------------------------
Sun Jan 25 20:20:46 UTC 2015 - matwey.kornilov@gmail.com

- Enable pcm051rev3 for Phytec Wega board
  * Add pcm051-bootscr.patch: add bootscript support (upstreamed in 2015.04-rc1)

-------------------------------------------------------------------
Tue Jan 13 14:32:17 UTC 2015 - guillaume@opensuse.org

- Update to 2015.01:
  * Drop upstreamed patches:
    - 0001-spl-mmc-Fix-raw-boot-mode-related-to-commit.patch
    - fix_sata.patch
  * Update partially upstreamed mx53loco-bootscr.patch

-------------------------------------------------------------------
Tue Dec 16 11:10:23 UTC 2014 - guillaume@opensuse.org

- Backport SPL MMC raw boot mode fix:
  * 0001-spl-mmc-Fix-raw-boot-mode-related-to-commit.patch

-------------------------------------------------------------------
Sat Dec 13 12:12:41 UTC 2014 - xxxxxmichl@googlemail.com

- Added support for A20-OLinuXIno-LIME2 and A10-OLinuXino-LIME from
  www.olimex.com

-------------------------------------------------------------------
Tue Dec  9 11:23:41 UTC 2014 - guillaume@opensuse.org

- Rename XLOADER to OMAP_SPL in pre_checkin.sh and u-boot.spec.in

-------------------------------------------------------------------
Tue Dec  9 09:15:27 UTC 2014 - guillaume@opensuse.org

- Update to 2015.01-rc3 
  * Drop upstreamed/unneeded patches:
    - 0001-exynos-Enable-config_distro_defaults.h.patch
    - 0002-exynos5-Use-config_distro_bootcmd.h.patch
    - boot_mode_fallback.patch
    - fix_snow_usb_support
    - fix_spl_ext.patch
    - fix_arm_hf_toolchain.patch
    - origen-ext2.patch
  * Update patch: 
    - fix_snow_config.patch
  * Follow upstream: rpi_b config renamed to rpi

-------------------------------------------------------------------
Tue Dec  2 12:41:55 UTC 2014 - guillaume@opensuse.org

- Update snow (chromebook)
  * Update patch: 
    - fix_snow_config.patch patch
  * Add patches:
    - add_snow_usb_boot.patch to be able to boot from USB0
    - fix_bootpart_snow_only.patch to boot on partition #2 (snow only!)
  * Backport patches:
    - fix_snow_usb_support.patch to fix USB on snow
    - 0001-exynos-Enable-config_distro_defaults.h.patch
    - 0002-exynos5-Use-config_distro_bootcmd.h.patch
  * Drop unneeded/obsolete patches: 
    - fix_exynos5_text_base.patch
    - fix_snow_extra_env_settings.patch

-------------------------------------------------------------------
Sun Nov 30 13:17:33 UTC 2014 - guillaume@opensuse.org

- Add Bananapi initial support

-------------------------------------------------------------------
Tue Nov 25 08:29:14 UTC 2014 - guillaume@opensuse.org

- Update to 2015.01-rc2
- Update patch fix_omap_boot_mode.patch to be upstreamable and 
rename it to boot_mode_fallback.patch
- Drop obsolete patch: arndale.patch
- Add patches:
  * fix_arm_hf_toolchain.patch: fix build with hard float toolchain
  * fix_spl_ext.patch: fix SPL EXT error checks
  * fix_sata.patch: fix sata support and fix also mx53loco build

-------------------------------------------------------------------
Wed Nov 19 21:44:17 CET 2014 - guillaume.gardet@opensuse.org

- Fix mx53loco-bootscr.patch

-------------------------------------------------------------------
Mon Nov 17 21:15:50 UTC 2014 - oscar@naiandei.net

- Add u-boot-with-sunxi-spl.bin for sunxi boards

-------------------------------------------------------------------
Mon Nov 17 15:17:56 UTC 2014 - guillaume@opensuse.org

- Make use of RPM_OPT_FLAGS during make

-------------------------------------------------------------------
Sat Nov 15 14:55:06 UTC 2014 - guillaume@opensuse.org

- Fix sunxi boards (use u-boot.img instead of u-boot.bin)
- Remove duplicated default install line

-------------------------------------------------------------------
Tue Nov 11 13:32:36 UTC 2014 - guillaume@opensuse.org

- Update to 2015.01-rc1
-  Drop upstreamed patches:
  * add_spl_extfs_support.patch
  * ti_common_initrd_support.patch
- Refresh patch:
  * drop-marvell.patch
- Drop CREDITS file from DOC (dropped upstream)

-------------------------------------------------------------------
Mon Nov  3 10:19:42 UTC 2014 - guillaume@opensuse.org

- Apply fix_omap_boot_mode.patch only for omap3/omap4 boards

-------------------------------------------------------------------
Tue Oct 14 13:22:44 UTC 2014 - guillaume@opensuse.org

- Update to version 2014.10
- Drop upstreamed patch:
  * fix_sabrelite_boot.scr.patch
- Refresh patches:
  * arndale.patch
  * fix_snow_config.patch
  * fix_exynos5_text_base.patch
  * exynos5-dt.h.patch (renamed fix_snow_extra_env_settings.patch)

-------------------------------------------------------------------
Wed Oct  8 07:52:48 UTC 2014 - guillaume@opensuse.org

- Update to version 2014.10-rc3 
- Drop upstreamed patches:
  * beagle-bootscr.patch
  * panda-bootscr.patch
  * am335x_evm-bootscr.patch
- Refresh patches:
  * fix_sabrelite_boot.scr.patch
  * drop-marvell.patch
  * add_spl_extfs_support.patch
- Add a new patch to fix omap3beagle spl build:
  * fix_beagle_spl_build.patch

-------------------------------------------------------------------
Mon Sep  8 13:06:52 UTC 2014 - guillaume@opensuse.org

- Drop Hyundai_a7hd and cubox-i boards (now handle in Contrib repos
since it is not upstreamed), so drop related patches:
  * v2014.04-sunxi.patch
  * cubox-i-v2014.04-port.patch
  * cubox-i-enable_raw_rd.patch

-------------------------------------------------------------------
Wed Sep  3 12:02:22 UTC 2014 - guillaume@opensuse.org

- Update to version 2014.10-rc2
- drop upstreamed patch rpi_b-bootscr.patch
- drop fix_spl_build_for_am335x.patch (does build without it)
- Refresh patches:
  * drop-marvell.patch
  * fix_snow_config.patch

-------------------------------------------------------------------
Thu Aug 21 08:50:10 UTC 2014 - guillaume@opensuse.org

- Update SPL EXT fs support:
  * For omap boards (beagle and panda), SPL now looks for u-boot.img 
  as upstream instead of u-boot.bin
  * Remove mlo-ext2.patch to make proper patches in 
order to ease upstreaming our EXT fs SPL functions
  * Add panda-bootscr.patch to fix panda boot (was included in 
  mlo-ext2.patch)
  * Add fix_omap_boot_mode.patch to fix beagle and panda boot mode 
  (was included in mlo-ext2.patch)
  * Add add_spl_extfs_support.patch to get proper SPL EXT fs functions
  * Add enable_spl_ext_support_for_ti_armv7.patch to enable SPL EXT fs
  support for TI ARMv7 boards

-------------------------------------------------------------------
Tue Aug 19 17:35:22 UTC 2014 - matwey.kornilov@gmail.com

- Update to version 2014.10-rc1 and update patches

-------------------------------------------------------------------
Thu Jul 31 13:59:00 UTC 2014 - dimstar@opensuse.org

- Rename rpmlintrc to %{name}-rpmlintrc.
  Follow the packaging guidelines.

-------------------------------------------------------------------
Sat Jun 14 11:58:43 UTC 2014 - afaerber@suse.de

- add u-boot-cubietruck for Cubietruck (Cubieboard 3)

-------------------------------------------------------------------
Thu Jun 12 18:52:26 UTC 2014 - josua.m@t-online.de

- add u-boot-mx6cubox-i for Cubox-i and Hummingboard
  * currently conflicts with mlo-ext2 patch for omap4
    so only for cubox-i target mlo-ext2.patch is skipped
    and cubox-i patches are applied
  * patch source: https://github.com/vorlonofportland/u-boot/
    cubox-i-v2014.04-port.patch
    cubox-i-enable_raw_rd.patch

-------------------------------------------------------------------
Tue Apr 29 13:41:18 UTC 2014 - guillaume@opensuse.org

- Enhance pre_checkin.sh script to handle arch restrictions

-------------------------------------------------------------------
Tue Apr 29 13:18:48 UTC 2014 - guillaume@opensuse.org

- Fix builds :
  * 'tools' target is now 'tools-only'
  * kermit scripts moved from 'tools/scripts' to 'tools/kermit/'
  * Enhanced pre_checkin.sh script to handle uppercases in config name
  * Renamed config from cubieboard to Cubieboard
  * Renamed config from cubieboard2 to Cubieboard2
  * Renamed config from hyundai_a7hd to Hyundai_A7HD
  * Renamed config from mele_a1000 to Mele_A1000

-------------------------------------------------------------------
Tue Apr 29 13:06:57 UTC 2014 - guillaume@opensuse.org

- Add vexpress_aemv8a board

-------------------------------------------------------------------
Tue Apr 29 08:33:48 UTC 2014 - guillaume@opensuse.org

- Update to v2014.04
  * Update mlo-ext2.patch
  * Update mx53loco-bootscr.patch
  * Update origen-ext2.patch
  * Dropped v2014.01-sunxi.patch and created
  v2014.04-sunxi.patch by diffing u-boot-2014.04 with 
  u-boot-sunxi.git d9fe0a1e061e2bde6c24a0f7cef4f5023f3bd579
  * Update rpi_b-bootscr.patch
  * Drop gnuhash.patch (upstreamed)

-------------------------------------------------------------------
Thu Mar 27 14:22:23 UTC 2014 - guillaume@opensuse.org

- add u-boot-mx6qsabrelite (for iMX6 Sabre Lite board)

-------------------------------------------------------------------
Wed Feb  5 15:07:30 UTC 2014 - guillaume@opensuse.org

- add u-boot-snow (for Chromebook ARM)

-------------------------------------------------------------------
Wed Feb  5 14:59:29 UTC 2014 - guillaume@opensuse.org

- Fix boot.scr location for beagle and origen

-------------------------------------------------------------------
Thu Jan 30 14:28:34 UTC 2014 - dmueller@suse.com

- add u-boot-cubieboard2

-------------------------------------------------------------------
Thu Jan 30 06:46:45 UTC 2014 - afaerber@suse.de

- Drop 0006-ARMV7-hardfp-build-fix.patch:
  v2014.01 checks if -msoft-float compiles okay, and
  U-Boot is soft-float according to Tom Rini

-------------------------------------------------------------------
Tue Jan 28 15:29:14 UTC 2014 - guillaume@opensuse.org

- Disable CONFIG_SPL_OS_BOOT for ti armv7 configs with 
fix_spl_build_for_am335x.patch to reduce size of am335x SPL

-------------------------------------------------------------------
Sat Jan 26 22:46:44 UTC 2014 - afaerber@suse.de

- Update to v2014.01
* Manually updated 0006-ARMV7-hardfp-build-fix.patch
* Dropped v2013.10-sunxi.patch and created
  v2014.01-sunxi.patch by merging u-boot.git v2014.01 onto
  u-boot-sunxi.git e4a0232e173577893604b94fc3af7c047570970b
* Added gnuhash.patch to fix .gnu.hash section handling in ldscripts
* Rebased mlo-ext2.patch:
  omap4_common.h CONFIG_SUPPORT_RAW_INITRD hunk is now covered by
  ti_common_initrd_support.patch.
  am335xevm build is known breaking due to size constraints not
  trivially solvable without dropping our patch.

-------------------------------------------------------------------
Sun Jan 26 12:14:10 UTC 2014 - afaerber@suse.de

- Fix regression in packaging u-boot-dtb-tegra.bin:
  There is in fact a u-boot-spl.bin SPL being built,
  but it is 0xff-padded as u-boot-spl-pad.bin and then
  prepended to u-boot.bin and the .dtb.
  u-boot-dtb.bin exists independently as just u-boot.bin and .dtb,
  so give preference to u-boot-dtb-tegra.bin over u-boot-dtb.bin.

-------------------------------------------------------------------
Mon Jan 20 14:05:13 UTC 2014 - agraf@suse.com

- The "Tegra SPL" is not an SPL but a differently named u-boot.bin
  file. Fix up the generation scripts.

-------------------------------------------------------------------
Sun Jan 19 00:09:41 UTC 2014 - afaerber@suse.de

- Include Tegra SPL for Colibri T20

-------------------------------------------------------------------
Wed Jan  8 17:26:10 UTC 2014 - agraf@suse.com

- switch raspberry to ext2

-------------------------------------------------------------------
Wed Jan  8 13:41:32 UTC 2014 - matwey.kornilov@gmail.com

- am335x_evm-bootscr.patch: Search for files in /boot, not in /boot/boot

-------------------------------------------------------------------
Wed Jan  8 02:07:44 UTC 2014 - afaerber@suse.de

- rpi_b-bootscr.patch: Change rpi_b to use boot.scr

-------------------------------------------------------------------
Tue Jan  7 16:01:13 UTC 2014 - dmueller@suse.com

- remove origin flavor

-------------------------------------------------------------------
Mon Jan  6 22:57:05 UTC 2014 - afaerber@suse.de

- Enable paz00 config (Toshiba AC100)

-------------------------------------------------------------------
Mon Jan  6 21:34:03 UTC 2014 - afaerber@suse.de

- Enable colibri_t20_iris config (Toradex Colibri-T20 on Iris)
- Update u-boot.spec.in copyright and fix typo in comment

-------------------------------------------------------------------
Sat Jan  4 01:47:50 UTC 2014 - agraf@suse.com

- prefer u-boot-dtb.bin over u-boot.bin
- simplify files section

-------------------------------------------------------------------
Fri Jan  3 16:54:30 UTC 2014 - dmueller@suse.com

- mlo-ext2.patch: Search for files in /boot, not in /boot/boot

-------------------------------------------------------------------
Mon Dec 30 18:37:50 UTC 2013 - matwey.kornilov@gmail.com

- Add am335x_evm-bootscr.patch: Add bootscr to AM335x
  platform based devices

-------------------------------------------------------------------
Tue Dec 17 14:33:52 UTC 2013 - guillaume@opensuse.org

- Remove old unused patches:
  * v2013.04-sunxi.patch
  * loadaddr-defaults.patch

-------------------------------------------------------------------
Tue Dec 17 14:10:51 UTC 2013 - guillaume@opensuse.org

- Add ti_common_initrd_support.patch to enable initrd support for 
  AM335x boards

-------------------------------------------------------------------
Tue Dec 17 14:03:50 UTC 2013 - guillaume@opensuse.org

- Add am335x_evm support which includes: Beagle Bone, 
  Beagle Bone Black, TI AM335x EVM, TI AM335x EVM-SK

-------------------------------------------------------------------
Tue Nov 26 13:46:22 UTC 2013 - guillaume@opensuse.org

- Add Arndale support

-------------------------------------------------------------------
Tue Nov 26 13:05:10 UTC 2013 - guillaume@opensuse.org

- Update v2013.04-sunxi.patch to v2013.10-sunxi.patch

-------------------------------------------------------------------
Mon Nov 25 10:05:48 UTC 2013 - guillaume@opensuse.org

- Remove kerneladdr and ramdiskaddr definition in u-boot patches 
   (now done in JeOS image with u-boot hooks)
- Update patches to current version:
 * 0006-ARMV7-hardfp-build-fix.patch
 * beagle-bootscr.patch
 * mx53loco-bootscr.patch
 * mlo-ext2.patch
- Merge fix_omap4_ext2_boot.patch in mlo-ext2.patch 
- Rename exynos-ext2.patch in origen-ext2.patch

-------------------------------------------------------------------
Mon Nov 25 09:57:12 UTC 2013 - guillaume@opensuse.org

- Update to 2013.10

-------------------------------------------------------------------
Fri Nov 22 16:25:36 UTC 2013 - guillaume@opensuse.org

- Fix OMAP4 pandaboard EXT2 boot

-------------------------------------------------------------------
Fri Sep 13 11:31:14 UTC 2013 - guillaume@opensuse.org

- Fix u-boot.bin and boot.scr place since they are now in boot/ folder.

-------------------------------------------------------------------
Wed May  1 20:48:30 UTC 2013 - dmueller@suse.com

- add support for cubieboard, hyundaia7hd, melea1000

-------------------------------------------------------------------
Wed May  1 08:18:26 UTC 2013 - dmueller@suse.com

- update to 2013.04
  * no upstream changelog available
- remove dead u-boot-raspberrypi* (actually called rpib now)
- add rpib variant

-------------------------------------------------------------------
Thu Apr 11 17:05:58 UTC 2013 - guillaume.gardet@opensuse.org

- add omap3_beagle to targets

-------------------------------------------------------------------
Thu Apr 11 16:05:41 UTC 2013 - dmueller@suse.com

- remove u8500href subpackage, kernel got dropped

-------------------------------------------------------------------
Sun Apr  7 14:32:20 UTC 2013 - agraf@suse.com

- update to 2013.04rc2
- enable bootz support on all boards

-------------------------------------------------------------------
Wed Mar 20 07:21:06 UTC 2013 - agraf@suse.com

- fix mlo-ext2.patch to actually use the ext4 infrastructure

-------------------------------------------------------------------
Sat Jan 26 10:38:07 UTC 2013 - dmueller@suse.com

- update mlo-ext2.patch:
  * use the ext4 driver now since ext2 got removed

-------------------------------------------------------------------
Wed Oct 24 22:33:13 UTC 2012 - agraf@suse.com

- add sdhc-1.patch, sdhc-2.patch, sdhc-3.patch:
  * backport upstream sdhc fixes

-------------------------------------------------------------------
Wed Oct 24 01:37:36 CEST 2012 - agraf@suse.de

- update to 2012.10:
  - refresh patches 0006-ARMV7-hardfp-build-fix.patch, mlo-ext2.patch,
    loadaddr-defaults.patch, mx53loco-bootscr.patch

-------------------------------------------------------------------
Mon Oct 22 12:00:22 UTC 2012 - agraf@suse.com

- fix origen by putting the ramdisk higher

-------------------------------------------------------------------
Mon Aug  6 09:39:54 UTC 2012 - dmueller@suse.com

- remove Marvell sources as they are non-free licensed (bnc#773824)

-------------------------------------------------------------------
Thu Jul 26 18:21:44 UTC 2012 - agraf@suse.com

- fix ext2 support for origen
- add origen-spl.bin for origen

-------------------------------------------------------------------
Thu Jul 26 09:47:31 UTC 2012 - dmueller@suse.com

- merge u-boot-tools

-------------------------------------------------------------------
Wed Jul 25 21:05:08 UTC 2012 - agraf@suse.com

- add ext2 support by default in mx53loco

-------------------------------------------------------------------
Tue Jul 24 21:28:59 UTC 2012 - agraf@suse.com

- add support for mx53loco

-------------------------------------------------------------------
Tue Jul 24 11:25:42 UTC 2012 - dmueller@suse.com

- remove u-boot-omap3beagle

-------------------------------------------------------------------
Mon Jul 23 22:34:04 UTC 2012 - agraf@suse.com

- bump to 2012.04.01
  - fixes bug in cmdline parsing

-------------------------------------------------------------------
Mon Jul 23 22:26:47 UTC 2012 - agraf@suse.com

- add calxeda highbank support

-------------------------------------------------------------------
Thu Jul 12 12:51:56 UTC 2012 - agraf@suse.com

- autoload boot.scr on beagle, so we can boot again

-------------------------------------------------------------------
Thu Jul 12 08:12:15 UTC 2012 - agraf@suse.com

- update to upstream u-boot 2012.04
  -> gets rid of linaro fork, only mainline now
  -> gets us omap3 MLO support, no more need for x-loader
  -> potentially fixes voltage issues on omap4

-------------------------------------------------------------------
Thu Jun 14 09:04:53 UTC 2012 - adrian@suse.de

- add SUSE style conflicts to avoid installation of multiple
  boot loaders

-------------------------------------------------------------------
Tue Apr 17 11:59:55 UTC 2012 - joop.boonen@opensuse.org

- Included u-boot.spec.in and gen_spec.sh in the spec file

-------------------------------------------------------------------
Mon Feb  6 13:25:09 UTC 2012 - agraf@suse.com

- use ext2 on panda

-------------------------------------------------------------------
Tue Dec 20 02:36:05 UTC 2011 - agraf@suse.com

- use ttyO2 as default console= on OMAP boards

-------------------------------------------------------------------
Mon Dec 19 20:21:21 UTC 2011 - agraf@suse.com

- add u8500_href and origen configs

-------------------------------------------------------------------
Fri Dec 16 16:03:01 UTC 2011 - agraf@suse.com

- fix lint failures

-------------------------------------------------------------------
Fri Dec 16 14:46:53 CET 2011 - agraf@suse.com

- don't install map

-------------------------------------------------------------------
Fri Dec 16 02:16:19 UTC 2011 - agraf@suse.com

- generalize spec file to be able to build for more boards
- add beagle board spec file
- remove boot.scr

-------------------------------------------------------------------
Fri Dec 16 01:15:47 UTC 2011 - agraf@suse.com

- rename to u-boot-omap4panda

-------------------------------------------------------------------
Tue Dec 13 17:24:45 UTC 2011 - dkukawka@suse.de

- new package based on u-boot-omap4panda but use linaro u-boot git 
  repo (http://git.linaro.org/git/boot/u-boot-linaro-stable.git)
  instead of mainline u-boot. This package also contains the MLO 
  (this package obsoletes the x-loader package)

-------------------------------------------------------------------
Tue Nov 29 22:53:44 UTC 2011 - joop.boonen@opensuse.org

- COPYING CREDITS README are now in the standard package

-------------------------------------------------------------------
Thu Nov 24 21:08:58 UTC 2011 - joop.boonen@opensuse.org

- Corrected the links

-------------------------------------------------------------------
Tue Nov 22 17:47:17 UTC 2011 - joop.boonen@opensuse.org

- Build without u-boot tools as we have a u-boot-tools packages

-------------------------------------------------------------------
Sun Nov 20 17:00:43 UTC 2011 - joop.boonen@opensuse.org

- Cleaned the spec file up the spec file
- The name is the same as the package name

-------------------------------------------------------------------
Sun Nov 13 13:13:39 UTC 2011 - joop.boonen@opensuse.org

- Build u-boot according to http://elinux.org/Panda_How_to_MLO_&_u-boot
- Using .txt config file instead of .scr it's gerated via mkimage

-------------------------------------------------------------------
Wed Nov 09 22:55:09 UTC 2011 - joop.boonen@opensuse.org

- Used scr file based on http://elinux.org definition
- Build u-boot 20111109
- Used the Meego panda u-boot as a base

-------------------------------------------------------------------
Fri Feb 18 00:00:00 UTC 2011 - raghuveer.murthy@ti.com> 
- 2010.09-MeeGo  
- Fix for u-boot fails to compile on armv7hl, BMC#13140  
  
-------------------------------------------------------------------
Thu Nov 18 00:00:00 UTC 2010 - peter.j.zhu@intel.com> 
- 2010.09-MeeGo  
- Don't build against i586, BMC#10159  
  
-------------------------------------------------------------------
Tue Oct 10 00:00:00 UTC 2010 - nm@ti.com> 
- 2010.09.rc1-MeeGo  
- Added option to enable boot.scr generation and copy  
  
-------------------------------------------------------------------
Mon Oct 04 00:00:00 UTC 2010 - nm@ti.com> 
- 2010.09.rc1-MeeGo  
- Update to 2010.09  
  
-------------------------------------------------------------------
Wed Sep 14 00:00:00 UTC 2010 - nm@ti.com> 
- 2010.09.rc1-MeeGo  
- Update to 2010.09.rc1  
- MeeGo customization  
- Enabled PandaBoard, Beagleboard build  
  
-------------------------------------------------------------------
Wed Mar 31 00:00:00 UTC 2010 - silvan.calarco@mambasoft.it> 
- 2009.11.1-1mamba  
- update to 2009.11.1
  
-------------------------------------------------------------------
Wed Mar 31 00:00:00 UTC 2010 -

Places

File u-boot-colibrit20.changes of Package u-boot (Revision 508ee552ebb5c7e0a3bbf50d29d1b28a)

Places