Sign Up
Log In
Log In
or
Sign Up
Places
All Projects
Status Monitor
Collapse sidebar
Please login to access the resource
SUSE:SLE-12-SP2:GA
xen.7653
CVE-2014-9718-qemuu-PRDT-overflow-from-guest-to...
Overview
Repositories
Revisions
Requests
Users
Attributes
Meta
File CVE-2014-9718-qemuu-PRDT-overflow-from-guest-to-host.patch of Package xen.7653
References: bsc#964431 CVE-2014-9718 Subject: ide: Correct handling of malformed/short PRDTs From: John Snow jsnow@redhat.com Fri Oct 31 16:03:39 2014 -0400 Date: Fri Nov 14 09:20:35 2014 +0000: Git: 3251bdcf1c67427d964517053c3d185b46e618e8 This impacts both BMDMA and AHCI HBA interfaces for IDE. Currently, we confuse the difference between a PRDT having "0 bytes" and a PRDT having "0 complete sectors." When we receive an incomplete sector, inconsistent error checking leads to an infinite loop wherein the call succeeds, but it didn't give us enough bytes -- leading us to re-call the DMA chain over and over again. This leads to, in the BMDMA case, leaked memory for short PRDTs, and infinite loops and resource usage in the AHCI case. The .prepare_buf() callback is reworked to return the number of bytes that it successfully prepared. 0 is a valid, non-error answer that means the table was empty and described no bytes. -1 indicates an error. Our current implementation uses the io_buffer in IDEState to ultimately describe the size of a prepared scatter-gather list. Even though the AHCI PRDT/SGList can be as large as 256GiB, the AHCI command header limits transactions to just 4GiB. ATA8-ACS3, however, defines the largest transaction to be an LBA48 command that transfers 65,536 sectors. With a 512 byte sector size, this is just 32MiB. Since our current state structures use the int type to describe the size of the buffer, and this state is migrated as int32, we are limited to describing 2GiB buffer sizes unless we change the migration protocol. For this reason, this patch begins to unify the assertions in the IDE pathways that the scatter-gather list provided by either the AHCI PRDT or the PCI BMDMA PRDs can only describe, at a maximum, 2GiB. This should be resilient enough unless we need a sector size that exceeds 32KiB. Further, the likelihood of any guest operating system actually attempting to transfer this much data in a single operation is very slim. To this end, the IDEState variables have been updated to more explicitly clarify our maximum supported size. Callers to the prepare_buf callback have been reworked to understand the new return code, and all versions of the prepare_buf callback have been adjusted accordingly. Lastly, the ahci_populate_sglist helper, relied upon by the AHCI implementation of .prepare_buf() as well as the PCI implementation of the callback have had overflow assertions added to help make clear the reasonings behind the various type changes. [Added %d -> %"PRId64" fix John sent because off_pos changed from int to int64_t. --Stefan] Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-id: 1414785819-26209-4-git-send-email-jsnow@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Index: xen-4.5.3-testing/tools/qemu-xen-dir-remote/hw/ide/ahci.c =================================================================== --- xen-4.5.3-testing.orig/tools/qemu-xen-dir-remote/hw/ide/ahci.c +++ xen-4.5.3-testing/tools/qemu-xen-dir-remote/hw/ide/ahci.c @@ -639,7 +639,8 @@ static void ahci_write_fis_d2h(AHCIDevic } } -static int ahci_populate_sglist(AHCIDevice *ad, QEMUSGList *sglist, int offset) +static int ahci_populate_sglist(AHCIDevice *ad, QEMUSGList *sglist, + int32_t offset) { AHCICmdHdr *cmd = ad->cur_cmd; uint32_t opts = le32_to_cpu(cmd->opts); @@ -650,13 +651,21 @@ static int ahci_populate_sglist(AHCIDevi uint8_t *prdt; int i; int r = 0; - int sum = 0; + uint64_t sum = 0; int off_idx = -1; - int off_pos = -1; + int64_t off_pos = -1; int tbl_entry_size; IDEBus *bus = &ad->port; BusState *qbus = BUS(bus); + /* + * Note: AHCI PRDT can describe up to 256GiB. SATA/ATA only support + * transactions of up to 32MiB as of ATA8-ACS3 rev 1b, assuming a + * 512 byte sector size. We limit the PRDT in this implementation to + * a reasonably large 2GiB, which can accommodate the maximum transfer + * request for sector sizes up to 32K. + */ + if (!sglist_alloc_hint) { DPRINTF(ad->port_no, "no sg list given by guest: 0x%08x\n", opts); return -1; @@ -691,7 +700,7 @@ static int ahci_populate_sglist(AHCIDevi } if ((off_idx == -1) || (off_pos < 0) || (off_pos > tbl_entry_size)) { DPRINTF(ad->port_no, "%s: Incorrect offset! " - "off_idx: %d, off_pos: %d\n", + "off_idx: %d, off_pos: %"PRId64"\n", __func__, off_idx, off_pos); r = -1; goto out; @@ -706,6 +715,13 @@ static int ahci_populate_sglist(AHCIDevi /* flags_size is zero-based */ qemu_sglist_add(sglist, le64_to_cpu(tbl[i].addr), le32_to_cpu(tbl[i].flags_size) + 1); + if (sglist->size > INT32_MAX) { + error_report("AHCI Physical Region Descriptor Table describes " + "more than 2 GiB.\n"); + qemu_sglist_destroy(sglist); + r = -1; + goto out; + } } } @@ -1055,16 +1071,19 @@ static void ahci_start_dma(IDEDMA *dma, dma_cb(s, 0); } -static int ahci_dma_prepare_buf(IDEDMA *dma, int is_write) +static int32_t ahci_dma_prepare_buf(IDEDMA *dma, int is_write) { AHCIDevice *ad = DO_UPCAST(AHCIDevice, dma, dma); IDEState *s = &ad->port.ifs[0]; - ahci_populate_sglist(ad, &s->sg, 0); + if (ahci_populate_sglist(ad, &s->sg, s->io_buffer_offset) == -1) { + DPRINTF(ad->port_no, "ahci_dma_prepare_buf failed.\n"); + return -1; + } s->io_buffer_size = s->sg.size; DPRINTF(ad->port_no, "len=%#x\n", s->io_buffer_size); - return s->io_buffer_size != 0; + return s->io_buffer_size; } static int ahci_dma_rw_buf(IDEDMA *dma, int is_write) Index: xen-4.5.3-testing/tools/qemu-xen-dir-remote/hw/ide/core.c =================================================================== --- xen-4.5.3-testing.orig/tools/qemu-xen-dir-remote/hw/ide/core.c +++ xen-4.5.3-testing/tools/qemu-xen-dir-remote/hw/ide/core.c @@ -659,10 +659,11 @@ void ide_dma_cb(void *opaque, int ret) n = s->nsector; s->io_buffer_index = 0; s->io_buffer_size = n * 512; - if (s->bus->dma->ops->prepare_buf(s->bus->dma, ide_cmd_is_read(s)) == 0) { + if (s->bus->dma->ops->prepare_buf(s->bus->dma, ide_cmd_is_read(s)) < 512) { /* The PRDs were too short. Reset the Active bit, but don't raise an * interrupt. */ s->status = READY_STAT | SEEK_STAT; + dma_buf_commit(s); goto eot; } @@ -2207,6 +2208,11 @@ static int ide_nop_int(IDEDMA *dma, int return 0; } +static int32_t ide_nop_int32(IDEDMA *dma, int x) +{ + return 0; +} + static void ide_nop_restart(void *opaque, int x, RunState y) { } @@ -2214,7 +2220,7 @@ static void ide_nop_restart(void *opaque static const IDEDMAOps ide_dma_nop_ops = { .start_dma = ide_nop_start, .start_transfer = ide_nop, - .prepare_buf = ide_nop_int, + .prepare_buf = ide_nop_int32, .rw_buf = ide_nop_int, .set_unit = ide_nop_int, .add_status = ide_nop_int, Index: xen-4.5.3-testing/tools/qemu-xen-dir-remote/hw/ide/internal.h =================================================================== --- xen-4.5.3-testing.orig/tools/qemu-xen-dir-remote/hw/ide/internal.h +++ xen-4.5.3-testing/tools/qemu-xen-dir-remote/hw/ide/internal.h @@ -322,6 +322,7 @@ typedef void EndTransferFunc(IDEState *) typedef void DMAStartFunc(IDEDMA *, IDEState *, BlockDriverCompletionFunc *); typedef int DMAFunc(IDEDMA *); typedef int DMAIntFunc(IDEDMA *, int); +typedef int32_t DMAInt32Func(IDEDMA *, int); typedef void DMARestartFunc(void *, int, RunState); struct unreported_events { @@ -383,7 +384,7 @@ struct IDEState { uint8_t cdrom_changed; int packet_transfer_size; int elementary_transfer_size; - int io_buffer_index; + int32_t io_buffer_index; int lba; int cd_sector_size; int atapi_dma; /* true if dma is requested for the packet cmd */ @@ -392,8 +393,8 @@ struct IDEState { struct iovec iov; QEMUIOVector qiov; /* ATA DMA state */ - int io_buffer_offset; - int io_buffer_size; + int32_t io_buffer_offset; + int32_t io_buffer_size; QEMUSGList sg; /* PIO transfer handling */ int req_nb_sectors; /* number of sectors per interrupt */ @@ -403,8 +404,8 @@ struct IDEState { uint8_t *io_buffer; /* PIO save/restore */ int32_t io_buffer_total_len; - int cur_io_buffer_offset; - int cur_io_buffer_len; + int32_t cur_io_buffer_offset; + int32_t cur_io_buffer_len; uint8_t end_transfer_fn_idx; QEMUTimer *sector_write_timer; /* only used for win2k install hack */ uint32_t irq_count; /* counts IRQs when using win2k install hack */ @@ -428,7 +429,7 @@ struct IDEState { struct IDEDMAOps { DMAStartFunc *start_dma; DMAFunc *start_transfer; - DMAIntFunc *prepare_buf; + DMAInt32Func *prepare_buf; DMAIntFunc *rw_buf; DMAIntFunc *set_unit; DMAIntFunc *add_status; Index: xen-4.5.3-testing/tools/qemu-xen-dir-remote/hw/ide/macio.c =================================================================== --- xen-4.5.3-testing.orig/tools/qemu-xen-dir-remote/hw/ide/macio.c +++ xen-4.5.3-testing/tools/qemu-xen-dir-remote/hw/ide/macio.c @@ -505,6 +505,11 @@ static int ide_nop_int(IDEDMA *dma, int return 0; } +static int32_t ide_nop_int32(IDEDMA *dma, int x) +{ + return 0; +} + static void ide_nop_restart(void *opaque, int x, RunState y) { } @@ -522,7 +527,7 @@ static void ide_dbdma_start(IDEDMA *dma, static const IDEDMAOps dbdma_ops = { .start_dma = ide_dbdma_start, .start_transfer = ide_nop, - .prepare_buf = ide_nop_int, + .prepare_buf = ide_nop_int32, .rw_buf = ide_nop_int, .set_unit = ide_nop_int, .add_status = ide_nop_int, Index: xen-4.5.3-testing/tools/qemu-xen-dir-remote/hw/ide/pci.c =================================================================== --- xen-4.5.3-testing.orig/tools/qemu-xen-dir-remote/hw/ide/pci.c +++ xen-4.5.3-testing/tools/qemu-xen-dir-remote/hw/ide/pci.c @@ -28,7 +28,7 @@ #include <hw/isa/isa.h> #include "block/block.h" #include "sysemu/dma.h" - +#include "qemu/error-report.h" #include <hw/ide/pci.h> #define BMDMA_PAGE_SIZE 4096 @@ -51,8 +51,11 @@ static void bmdma_start_dma(IDEDMA *dma, } } -/* return 0 if buffer completed */ -static int bmdma_prepare_buf(IDEDMA *dma, int is_write) +/** + * Return the number of bytes successfully prepared. + * -1 on error. + */ +static int32_t bmdma_prepare_buf(IDEDMA *dma, int is_write) { BMDMAState *bm = DO_UPCAST(BMDMAState, dma, dma); IDEState *s = bmdma_active_if(bm); @@ -70,8 +73,9 @@ static int bmdma_prepare_buf(IDEDMA *dma if (bm->cur_prd_len == 0) { /* end of table (with a fail safe of one page) */ if (bm->cur_prd_last || - (bm->cur_addr - bm->addr) >= BMDMA_PAGE_SIZE) - return s->io_buffer_size != 0; + (bm->cur_addr - bm->addr) >= BMDMA_PAGE_SIZE) { + return s->io_buffer_size; + } pci_dma_read(pci_dev, bm->cur_addr, &prd, 8); bm->cur_addr += 8; prd.addr = le32_to_cpu(prd.addr); @@ -86,12 +90,23 @@ static int bmdma_prepare_buf(IDEDMA *dma l = bm->cur_prd_len; if (l > 0) { qemu_sglist_add(&s->sg, bm->cur_prd_addr, l); + + /* Note: We limit the max transfer to be 2GiB. + * This should accommodate the largest ATA transaction + * for LBA48 (65,536 sectors) and 32K sector sizes. */ + if (s->sg.size > INT32_MAX) { + error_report("IDE: sglist describes more than 2GiB.\n"); + break; + } bm->cur_prd_addr += l; bm->cur_prd_len -= l; s->io_buffer_size += l; } } - return 1; + + qemu_sglist_destroy(&s->sg); + s->io_buffer_size = 0; + return -1; } /* return 0 if buffer completed */
Locations
Projects
Search
Status Monitor
Help
OpenBuildService.org
Documentation
API Documentation
Code of Conduct
Contact
Support
@OBShq
Terms
openSUSE Build Service is sponsored by
The Open Build Service is an
openSUSE project
.
Sign Up
Log In
Places
Places
All Projects
Status Monitor
