File yast2-firewall.changes of Package yast2-firewall

Overview Repositories Revisions Requests Users Attributes Meta

File yast2-firewall.changes of Package yast2-firewall (Revision f45eda892e915ae58035ed45738e8bab)

Currently displaying revision f45eda892e915ae58035ed45738e8bab , Show latest

-------------------------------------------------------------------
Fri Oct 30 11:47:21 UTC 2020 - Knut Anderssen <kanderssen@suse.com>

- AutoYaST: When no firewall section is defined, write the service
  settings according to the proposal (bsc#1178050)
- 4.3.9

-------------------------------------------------------------------
Thu Oct 22 20:44:20 UTC 2020 - Josef Reidinger <jreidinger@suse.com>

- Do not warn user about ssh key only authentication when
  ssh port is closed, but firewall is disabled.
  (bsc#1177953)
- 4.3.8

-------------------------------------------------------------------
Fri Oct 16 15:15:49 UTC 2020 - Josef Reidinger <jreidinger@suse.com>

- Do not enable firewall during first stage of AutoYaST
  (bsc#1177778) 
- 4.3.7

-------------------------------------------------------------------
Tue Oct 13 11:15:06 UTC 2020 - Knut Anderssen <kanderssen@suse.com>

- Modified the warning text introduced in previous change according
  to suggestions (jsc#SLE-1567)
- 4.3.6

-------------------------------------------------------------------
Fri Oct  9 10:42:32 UTC 2020 - Knut Anderssen <kanderssen@suse.com>

- Warn the user when the SSH port is closed or the service is
  disabled and the configured authentication is only based on SSH
  key (jsc#SLE-15675)
- 4.3.5

-------------------------------------------------------------------
Thu Aug 13 07:52:47 UTC 2020 - Michal Filka <mfilka@suse.com>

- AutoYaST: moved the configuration into first stage (bsc#1173624)
- 4.3.4

-------------------------------------------------------------------
Tue Aug 11 12:05:15 CEST 2020 - schubi@suse.de

- AutoYaST: Added supplements: autoyast(firewall) into the spec file
  in order to install this packages if the section has been defined
  in the AY configuration file (bsc#1146494).
- 4.3.3

-------------------------------------------------------------------
Thu Jul 23 15:55:52 UTC 2020 - Knut Anderssen <kanderssen@suse.com>

- AutoYaST: Only export modified zones when it is asked to export a
  reduced profile. (bsc#1171356)
- 4.3.2

-------------------------------------------------------------------
Thu May  7 15:22:56 CEST 2020 - schubi@suse.de

- AutoYaST: Cleanup/improve issue handling (bsc#1171335).
- 4.3.1

-------------------------------------------------------------------
Thu May  7 10:10:37 UTC 2020 - Josef Reidinger <jreidinger@suse.com>

- Autoyast schema: Allow optional types for string and map objects
  (bsc#1170886)
- 4.3.0

-------------------------------------------------------------------
Sat Mar 21 12:02:05 UTC 2020 - Knut Anderssen <kanderssen@suse.com>

- Force a reset of the firewalld API instance after modifying the
  service state (bsc#1166698)
- 4.2.4

-------------------------------------------------------------------
Wed Feb 26 20:23:04 UTC 2020 - Knut Anderssen <kanderssen@suse.com>

- AutoYaST: Added back the installation finish client for opening
  the VNC or SSH port during the first stage when used for remote
  installations (bsc#1161319)
- 4.2.3

-------------------------------------------------------------------
Tue Aug 27 18:00:06 CEST 2019 - schubi@suse.de

- Set X-SuSE-YaST-AutoInstResource in desktop file (bsc#144894).
- 4.2.2

-------------------------------------------------------------------
Fri May 31 12:29:57 UTC 2019 - Stasiek Michalski <hellcp@mailbox.org>

- Add metainfo (fate#319035)
- Revamp spec
- Replace GenericName with Comment
- 4.2.1

-------------------------------------------------------------------
Fri Apr 26 12:30:53 UTC 2019 - jreidinger <jreidinger@suse.com>

- change proposal naming and add option to set cpu mitigations
  (bsc#1128707)
- 4.2.0

-------------------------------------------------------------------
Tue Mar 26 23:44:33 UTC 2019 - knut.anderssen@suse.com

- Autoyast: Export zone name explicitly as it has been removed from
  the common attributes list (bsc#1130354)
- Fixed textdomain names
- 4.1.11

-------------------------------------------------------------------
Wed Jan 23 09:52:51 UTC 2019 - knut.anderssen@suse.com

- Autoyast: do not overwrite imported configuration when editing
  and fixed check for not configured summary (fate#324662)
- 4.1.10

-------------------------------------------------------------------
Thu Jan 17 12:53:20 UTC 2019 - knut.anderssen@suse.com

- Propose to reload the firewalld service after writing instead of
  restarting it as in other case it will unload kernel modules and
  terminate existing connections (bsc#1114673, bsc#1121277)
- 4.1.9

-------------------------------------------------------------------
Wed Jan 16 12:02:14 UTC 2019 - jreidinger@suse.com

- Autoyast: remove unused options, move export to own class,
  add support for custom zones in autoyast profile (fate#324662)
- 4.1.8

-------------------------------------------------------------------
Fri Jan 11 16:25:41 UTC 2019 - lslezak@suse.cz

- Fixed text domain names (bsc#1121643)
- 4.1.7

-------------------------------------------------------------------
Thu Jan 10 12:53:49 UTC 2019 - Josef Reidinger <jreidinger@suse.com>

- Ensure that custom zones use unique name (fate#324662)
- Explicitly mention that masquerade is IPv4 only (fate#324662)
- 4.1.6

-------------------------------------------------------------------
Tue Jan  8 13:22:25 CET 2019 - schubi@suse.de

- Restart running firewalld service if data has been changed.
  (bsc#1114673)
- 4.1.5

-------------------------------------------------------------------
Tue Jan  8 08:53:09 UTC 2019 - knut.anderssen@suse.com

- AutoYast schema:
  - Allowed the new 'forward_ports', 'rich_rules' and
    'source_ports' elements in zone entries (bsc#1108199)
- 4.1.4

-------------------------------------------------------------------
Thu Dec 20 11:19:51 UTC 2018 - knut.anderssen@suse.com

- Startup dialog: Replace the old UI::ServiceStatus by the new
  CWM::ServiceWidget (bsc#1114807)
- 4.1.3

-------------------------------------------------------------------
Fri Nov 30 15:13:02 UTC 2018 - jreidinger@suse.com

- Add ability to add/edit/remove zone (fate#324662)
- Show warning about lost selection only in ncurses and improve
  text
- add confirmation when aborting module
- 4.1.2

-------------------------------------------------------------------
Sat Nov 24 16:51:09 UTC 2018 - Stasiek Michalski <hellcp@mailbox.org>

- Provide icon with module (boo#1109310)
- 4.1.1

-------------------------------------------------------------------
Wed Nov 21 16:57:37 UTC 2018 - knut.anderssen@suse.com

- Drop completely old SuSEFirewall2 dialogs and modules.
  (fate#324662)
- 4.1.0

-------------------------------------------------------------------
Fri Nov  2 10:04:07 UTC 2018 - igonzalezsosa@suse.com

- Enable and open the SSH port when only public key authentication
  is available for the root user (fate#324690).
- 4.0.34

-------------------------------------------------------------------
Wed Oct 17 10:48:42 UTC 2018 - knut.anderssen@suse.com

- Added missing interfaces helpers requirement (fate#324662)
- 4.0.33

-------------------------------------------------------------------
Tue Oct 16 20:34:32 UTC 2018 - knut.anderssen@suse.com

- Fixed zone_options widget test mocking (fate#324662)
- 4.0.32

-------------------------------------------------------------------
Wed Oct 10 08:17:09 UTC 2018 - knut.anderssen@suse.com

- Small improvements to the widget for modifying the assignation
  of interfaces to zones (fate##324662):
  - Permits to split the input field entry by any combination of
    spaces or commas.
  - Initialize the zone selector with the default zone.
- 4.0.31

-------------------------------------------------------------------
Tue Oct  9 08:55:56 UTC 2018 - knut.anderssen@suse.com

- Alert the user about unsaved changes when leaving the zone
  services configuration without applying changes (fate#324662)
- 4.0.30

-------------------------------------------------------------------
Fri Oct  5 06:49:03 UTC 2018 - knut.anderssen@suse.com

- AutoYaST configuration: Added support to editing and resetting
  the current configuration. Improved the writing process
  (fate324662).
- 4.0.29

-------------------------------------------------------------------
Tue Oct  2 11:52:27 UTC 2018 - knut.anderssen@suse.com

- AutoYast schema:
  - Allowed the new 'description', 'short' and 'target' elements in
    zone entries (bsc#1108199)
- 4.0.28

-------------------------------------------------------------------
Fri Sep 21 13:26:02 UTC 2018 - igonzalezsosa@suse.com

- Add a new user interface to manage firewalld configuration
  (fate#324662).
- Supported featues:
  - Manage the firewalld service.
  - Browse interfaces and assign them to firewall zones.
  - List zones and design one of them as the default.
  - Assign services to zones.
  - Open ports.
- 4.0.27

-------------------------------------------------------------------
Mon Aug 20 16:21:38 CEST 2018 - schubi@suse.de

- Switched license in spec file from SPDX2 to SPDX3 format.
- Changed dir of COPYING file.

-------------------------------------------------------------------
Thu Jun 28 15:43:21 CEST 2018 - schubi@suse.de

- Added additional searchkeys to desktop file (fate#321043).
- 4.0.26

-------------------------------------------------------------------
Fri Apr 27 16:35:19 CEST 2018 - schubi@suse.de

- AutoYaST: Report whether an interface has been defined
  in more than one zone (bnc#1089855).
- 4.0.25

-------------------------------------------------------------------
Sat Apr 21 07:35:42 UTC 2018 - knut.anderssen@suse.com

- During installation, open services defined by (Tigervnc) instead
  of the 'vnc-server' service that is shipped with (firewalld)
  (bsc#1081952).
- 4.0.24

-------------------------------------------------------------------
Tue Apr 17 11:55:47 CEST 2018 - snwint@suse.de

- consistent wording (open/block) also for VNC ports (bsc#1089789)
- 4.0.23

-------------------------------------------------------------------
Tue Mar 27 12:02:55 UTC 2018 - knut.anderssen@suse.com

- Translate the installation finish client title (bsc#1084136)
- 4.0.22

-------------------------------------------------------------------
Fri Mar 23 11:38:40 UTC 2018 - knut.anderssen@suse.com

- AutoYaST SuSEFirewall2 Importer: Removed FW_LOG_ACCEPT_CRIT tag
  from the list of supported options as firewalld only log dropped
  packages and for accepted ones rich rules should be used instead
  (bsc#1086655)
- 4.0.21

-------------------------------------------------------------------
Wed Mar 21 23:42:21 UTC 2018 - knut.anderssen@suse.com

- More fixes to the firewall AY schema (bsc#1013047)
  - Added zone 'sources' element to the AutoYaST schema file.
  - Permitted the use of 'listentry' element in list entries.
- 4.0.20

-------------------------------------------------------------------
Tue Mar 13 07:24:55 UTC 2018 - knut.anderssen@suse.com

- Some fixes to the firewall AY schema (bsc#1013047)
  - Use "name" in zones
  - "default_zone" is a firewall attribute
- 4.0.19

-------------------------------------------------------------------
Tue Mar  6 07:04:46 UTC 2018 - knut.anderssen@suse.com

- SuSEFirewall2 importer changes (fate#323460)
  - Use internal zone instead of trusted when the protection from
    the INT zone is enabled which fits better with the definition.
  - Removed the mapping of apache2 and apache2-ssl services to
    firewalld services since the apache package will provide the
    services definition and we will not use firewall defaults.
- 4.0.18

-------------------------------------------------------------------
Tue Feb 27 13:08:22 UTC 2018 - jreidinger@suse.com

- Added textdomain for translation (bnc#1083015)
- 4.0.17

-------------------------------------------------------------------
Fri Feb 23 11:32:25 CET 2018 - schubi@suse.de

- Added textdomain for translation (bnc#1081458)
- 4.0.16

-------------------------------------------------------------------
Mon Feb 19 13:36:05 CET 2018 - schubi@suse.de

- Fixed "default_zone" in rnc file. (bnc#1013047)
- 4.0.15

-------------------------------------------------------------------
Thu Feb 15 10:58:14 UTC 2018 - mfilka@suse.com

- fate#323460
  - updated summary in autoyast client to work with new firewalld
    api
- 4.0.14

-------------------------------------------------------------------
Wed Feb 14 17:23:32 UTC 2018 - knut.anderssen@suse.com

- AutoYaST: added 'enable_firewall', 'start_firewall' and
  'FW_LOG_DROP_CRIT' to the list of supported properties for 
  SuSEFirewall2 profiles and fixed a typo with 'FW_LOG_DROP_ALL'
  (fate#323460).
- 4.0.13

-------------------------------------------------------------------
Mon Feb  6 13:46:40 UTC 2018 - gsouza@suse.com

- When firewall is called on ncurses or command line, an error
  message is presented to the user, informing him to use firewalld
  (fate#323460).
- 4.0.12

-------------------------------------------------------------------
Mon Feb  5 21:02:57 UTC 2018 - knut.anderssen@suse.com

- AutoYaST: When a profile using the SuSEFirewall2 schema is used,
  the user is reported with an error if some property is not
  supported or with a warning in other case. (fate#323460)
- 4.0.11

-------------------------------------------------------------------
Wed Jan 31 07:41:26 UTC 2018 - knut.anderssen@suse.com

- AutoYaST: (fate#323460)
  * Try to import again during writing in case it was not completed
  previously (ex: firewalld was not installed).
  *  Enable or disable firewalld depending on the profile
- 4.0.10

-------------------------------------------------------------------
Fri Jan 19 08:44:25 UTC 2018 - knut.anderssen@suse.com

- AutoYaST: fixed default valur for log denied packets when using
  SuSEFIrewall2 profiles (fate#323460)
- 4.0.9

-------------------------------------------------------------------
Mon Jan  8 22:40:27 UTC 2018 - knut.anderssen@suse.com

- AutoYaST: Added support to set the default zone and export the
  configuration. (fate#323460)
- 4.0.8

-------------------------------------------------------------------
Thu Jan  4 13:25:49 CET 2018 - schubi@suse.de

- AutoYaST: Reading settings only if the firewalld is installed.
  (fate#323460)
- 4.0.7

-------------------------------------------------------------------
Fri Dec 22 08:52:21 UTC 2017 - knut.anderssen@suse.com

- AutoYaST: Firewalld schema is now the default but SuSEFirewall2
  based profiles will still work although not all the properties
  are supported (#fate#323460)
- 4.0.6

-------------------------------------------------------------------
Tue Nov 21 00:15:55 UTC 2017 - knut.anderssen@suse.com

- Proposal: When the Firewall is disabled, open/close port links
  are not shown in the proposal and are disabled in the specific
  proposal dialog (bsc#1068354).
- 4.0.5

-------------------------------------------------------------------
Wed Nov 15 14:11:40 UTC 2017 - knut.anderssen@suse.com

- Do not touch firewalld services if it is not enabled in the
  proposal (bsc#1067915)
- Fixed a SuSEFirewallCmdLine firewalld api call.
- 4.0.4

-------------------------------------------------------------------
Thu Nov  9 22:22:15 UTC 2017 - knut.anderssen@suse.com

- ProposalSettings: fixed an attribute name error when trying to
  block vnc port (bsc#1067320)
- 4.0.3

-------------------------------------------------------------------
Thu Nov  9 09:16:14 UTC 2017 - knut.anderssen@suse.com

- ProposalSettings: fixed method name when vnc is enable by Linuxrc
  (bsc#1067320)
- 4.0.2

-------------------------------------------------------------------
Wed Nov  8 13:55:31 UTC 2017 - knut.anderssen@suse.com

- Added missing require (bsc#1067180)
- 4.0.1

-------------------------------------------------------------------
Thu Oct 26 11:34:59 UTC 2017 - knut.anderssen@suse.com

- Remove support for SuSEFirewall2 in firewall client supporting
  only firewalld (fate#323460)
- 4.0.0

-------------------------------------------------------------------
Wed Jun 14 07:37:51 UTC 2017 - mfilka@suse.com

- bnc#1044045
  - do not raise an internal error when pushing Add button when
    "Service to Allow" list is empty
- 3.2.0

-------------------------------------------------------------------
Fri Apr  7 13:51:51 UTC 2017 - gsouza@suse.com

- Inform the user if start/stop/restart fails bsc#962713
- 3.1.7

-------------------------------------------------------------------
Tue Jun  7 10:37:17 UTC 2016 - igonzalezsosa@suse.com

- Stop generating autodocs (fate#320356)
- 3.1.6

-------------------------------------------------------------------
Tue May 24 15:26:37 UTC 2016 - mchandras@suse.de

- Add support for firewalld (fate#318356)
  * Bump yast2 dependency to 3.1.191 which is the first version to
    support the firewalld backend.
- 3.1.5

-------------------------------------------------------------------
Fri Nov 13 09:15:40 UTC 2015 - igonzalezsosa@suse.com

- fix validation of AutoYaST profiles (bnc#954412)
- 3.1.4

-------------------------------------------------------------------
Thu Dec  4 09:50:10 UTC 2014 - jreidinger@suse.com

- remove X-KDE-Library from desktop file (bnc#899104)
- 3.1.3

-------------------------------------------------------------------
Mon Nov 10 14:26:46 UTC 2014 - jreidinger@suse.com

- fix breakage of progress in autoinstallation (bnc#845826)
- 3.1.2

-------------------------------------------------------------------
Wed Nov 27 15:04:21 CET 2013 - fehr@suse.de

- make autoyast automatically install SuSEfirewall2 when
  yast2-firewall is installed (bnc#845294)

-------------------------------------------------------------------
Thu Nov  7 21:01:38 UTC 2013 - mfilka@suse.com

- bnc#843646
  - fixed second stage proposal to reflect changes done during
    first stage
- 3.1.1

-------------------------------------------------------------------
Wed Sep 18 16:07:51 UTC 2013 - lslezak@suse.cz

- do not use *.spec.in template, use *.spec file with RPM macros
  instead
- 3.1.0

-------------------------------------------------------------------
Wed Aug 21 07:21:20 UTC 2013 - mfilka@suse.com

- moved firewall enabling / disabling from second stage to first stage
- 3.0.1

-------------------------------------------------------------------
Wed Jul 31 08:29:04 UTC 2013 - yast-devel@opensuse.org

- converted from YCP to Ruby by YCP Killer
  (https://github.com/yast/ycp-killer)
- version 3.0.0

-------------------------------------------------------------------
Wed Jul 24 11:38:10 CEST 2013 - locilka@suse.com

- Added better checking and more understandable UI to dialog for
  adding new masquerade rule (bnc#829706)
- 2.24.2

-------------------------------------------------------------------
Fri Jun 28 10:28:33 UTC 2013 - mfilka@suse.com

- added Start / Stop commands into CLI
- 2.24.1

-------------------------------------------------------------------
Mon May  6 15:08:31 CEST 2013 - locilka@suse.cz

- Using fixed checking for correct network definition to correctly
  support IPv6 (bnc#800592)
- Using ValidNetwork from IP module
- 2.24.0

-------------------------------------------------------------------
Mon Apr 15 15:37:01 CEST 2013 - locilka@suse.cz

- Fixed checking for running firewall service (bnc#812606)
- 2.21.4

-------------------------------------------------------------------
Tue Nov 13 13:44:09 CET 2012 - tgoettlicher@suse.de

- confirmed license GPL v2
- 2.21.3

-------------------------------------------------------------------
Thu Mar 29 14:45:40 CEST 2012 - jsuchome@suse.cz

- merged proofread texts

-------------------------------------------------------------------
Fri Nov  4 15:50:22 CET 2011 - locilka@suse.cz

- Added function keys for buttons (bnc#595564)
- 2.21.2

-------------------------------------------------------------------
Thu Oct 13 10:34:54 CEST 2011 - locilka@suse.cz

- Fixed a typo in text marked for translation (bnc#722459).
- 2.21.1

-------------------------------------------------------------------
Fri Aug 26 13:33:57 CEST 2011 - locilka@suse.cz

- Fixed Custom Rules dialog to handle additional flags (bnc#712670)
- 2.21.0

-------------------------------------------------------------------
Fri Aug  5 12:32:00 CEST 2011 - tgoettlicher@suse.de

- fixed .desktop file (bnc #681249)

-------------------------------------------------------------------
Fri Apr  2 15:24:40 CEST 2010 - locilka@suse.cz

- Added missing help for accepting-broadcast-reply (BNC #583046).
- Fixed HTML in help text (BNC #595204).
- 2.19.1

-------------------------------------------------------------------
Wed Jan 13 18:56:03 CET 2010 - kmachalkova@suse.cz

- Adjusted .desktop file(s) to wrap /sbin/yast2/ calls in xdg-su
  where root privileges are needed, removed X-KDE-SubstituteUID key
  (bnc#540627)

-------------------------------------------------------------------
Thu Nov 26 19:20:16 CET 2009 - kmachalkova@suse.cz

- Adapted to new Netmask API - prefix and netmask are now checked
  by two separate functions
- 2.19.0

-------------------------------------------------------------------
Fri Nov 20 13:12:06 CET 2009 - locilka@suse.cz

- Added description to the list of allowed services (FATE #306804).

-------------------------------------------------------------------
Fri Oct 23 11:55:48 CEST 2009 - kmachalkova@suse.cz

- Enable SSH service if user opts for opening SSH port in fw
  (bnc#537980)
- 2.18.1

-------------------------------------------------------------------
Tue Jan 20 14:54:18 CET 2009 - locilka@suse.cz

- Updated help text according to suggestions (bnc #461406).
- 2.18.0

-------------------------------------------------------------------
Tue Jan 13 15:22:25 CET 2009 - locilka@suse.cz

- Dropping the IPsec support as it doesn't have service defined by
  package yet (bnc #478487).

-------------------------------------------------------------------
Mon Jan 12 10:27:26 CET 2009 - locilka@suse.cz

- A better sorting for allowed services and services to allow
  (bnc #461790).
- 2.17.7

-------------------------------------------------------------------
Tue Dec  2 15:01:53 CET 2008 - locilka@suse.cz

- Escaping HTML in Firewall summary (bnc #450895).
- 2.17.6

-------------------------------------------------------------------
Tue Dec  2 14:10:43 CET 2008 - ug@suse.de

- rnc file fixed

-------------------------------------------------------------------
Mon Oct 13 10:00:42 CEST 2008 - locilka@suse.cz

- Fixed helps broken by proofreading (bnc #430521).
- 2.17.5

-------------------------------------------------------------------
Wed Sep 17 13:32:35 CEST 2008 - locilka@suse.cz

- Fixed button labels, helps, confirmation when deleting a selected
  entry and enabling/disabling buttons considering the data listed
  in tables - all according to YaST Style Guide (bnc #421049).
- 2.17.4

-------------------------------------------------------------------
Wed Sep 10 16:42:03 CEST 2008 - locilka@suse.cz

- Handling pop-up window close button (`cancel) (bnc #419101).
- 2.17.3

-------------------------------------------------------------------
Thu Aug 28 14:06:47 CEST 2008 - locilka@suse.cz

- Pup-up dialogs adapted to new ButtonBox widget (FATE #303446).
- TextEntry -> InputField.
- Adapted RPM dependencies.
- 2.17.2

-------------------------------------------------------------------
Wed Jul 16 18:50:14 CEST 2008 - locilka@suse.cz

- No more built-in YaST Firewall services...

-------------------------------------------------------------------
Tue Jul 15 18:37:56 CEST 2008 - locilka@suse.cz

- SuSEFirewallUI and SuSEFirewallCMDLine YCP modules marked as
  internal.
- Added SuSEFirewallCMDLine documentation.
- Using [Cancel] instead of [Abort].
- 2.17.1

-------------------------------------------------------------------
Tue Jul  8 11:30:47 CEST 2008 - locilka@suse.cz

- Explicitely enabling functionality that offers to install
  firewall packages if missing (bnc #388773).
- Adjusted firewall proposal to new API (fallback ports to open).
- 2.17.0

-------------------------------------------------------------------
Fri May 16 16:40:22 CEST 2008 - jsrain@suse.cz

- added categories Settings and System into desktop file
  (bnc #382778)

-------------------------------------------------------------------
Tue Apr 22 17:28:58 CEST 2008 - ug@suse.de

- rnc file fixed

-------------------------------------------------------------------
Mon Apr 14 12:01:44 CEST 2008 - locilka@suse.cz

- Unified Button Labels: OK instead of Accept (fate #120373).
- Fixed help (bnc #376702).
- 2.16.2

-------------------------------------------------------------------
Wed Apr  9 15:35:22 CEST 2008 - locilka@suse.cz

- Implemented Firewall support for SMB browsing (fate #300970)
- Fixed custom-rules - adding port range (bnc #376650).
- Added Custom Rules to summary dialog (fate #303304).
- 2.16.1

-------------------------------------------------------------------
Thu Apr  3 17:08:00 CEST 2008 - ug@suse.de

- rnc file fixed

-------------------------------------------------------------------
Tue Apr  1 09:56:06 CEST 2008 - jsrain@suse.cz

- merged texts from proofread

-------------------------------------------------------------------
Fri Mar 28 12:22:32 CET 2008 - ug@suse.de

- rnc file fixed
- 2.16.0

-------------------------------------------------------------------
Mon Mar 17 12:43:32 CET 2008 - jsrain@suse.cz

- added 'StartupNotify=true' to the desktop file (bnc #304964)

-------------------------------------------------------------------
Mon Jan 21 15:20:33 CET 2008 - locilka@suse.cz

- UI adjusted to be possible to proceed with more services defined
  by package with the same name / translation.
- Requires yast2 >= 2.16.22

-------------------------------------------------------------------
Tue Dec  4 15:30:30 CET 2007 - locilka@suse.cz

- Merged proofread texts.

-------------------------------------------------------------------
Mon Sep 17 17:39:12 CEST 2007 - ug@suse.de

- firewall.rnc file fixed for autoyast XML file
  validation (#211014)
- 2.15.8

-------------------------------------------------------------------
Mon Jul 30 17:59:56 CEST 2007 - locilka@suse.cz

- 2.15.7

-------------------------------------------------------------------
Fri May 25 13:30:04 CEST 2007 - jsrain@suse.cz

- removed outdated translations from .desktop-files (#271209)

-------------------------------------------------------------------
Wed May 16 12:09:01 CEST 2007 - locilka@suse.cz

- Opening "service:sshd" (defined by package) instead "ssh" in the
  firewall proposal and "service:xorg-x11-Xvnc" instead of "vnc"
  (#274761)
- Disabling "ssh" by one-click-feature in the firewall proposal
  disables both "service:sshd" and "ssh" port if added manually.
- 2.15.6

-------------------------------------------------------------------
Wed May  9 11:02:55 CEST 2007 - locilka@suse.cz

- Fixed typo (#270965).

-------------------------------------------------------------------
Wed Apr  4 10:20:50 CEST 2007 - locilka@suse.cz

- A brand new and better revolutionary solution has been worked out
  for a firewall service starting/stopping and enabling/disabling
  in order to maximize user understanding and minimize errors
  (#259304).
- 2.15.5

-------------------------------------------------------------------
Mon Apr  2 13:37:15 CEST 2007 - locilka@suse.cz

- Show firewall summary details on request (#230042).
- 2.15.4

-------------------------------------------------------------------
Fri Mar  2 13:37:56 CET 2007 - locilka@suse.cz

- Adding forgotten handling of `cancel in the Summary dialog
  (bugzilla #249777).
- 2.15.3

-------------------------------------------------------------------
Wed Feb 28 15:31:25 CET 2007 - locilka@suse.cz

- Check and install SuSEfirewall2 package when reading the
  configuration. Supported in yast2-2.15.15 and later (#245506).
- Disabling possibility to configure firewall in Installation in
  Network proposal when SuSEfirewall2 package is not installed.

-------------------------------------------------------------------
Tue Feb 27 14:28:21 CET 2007 - locilka@suse.cz

- Added support for Firewall Custom Rules (FATE #120042,
  FATE #100068). Supported settings are: Source Network, Source
  Port, Protocol, and Destination Port.
- Added new testsuite.
- 2.15.2

-------------------------------------------------------------------
Thu Feb 22 17:26:21 CET 2007 - locilka@suse.cz

- Fixed and unified icons in dialogs.
- 2.15.1

-------------------------------------------------------------------
Mon Dec  4 16:38:22 CET 2006 - locilka@suse.cz

- A little help/description for firewall module in installation
  proposal (using result of FATE #301151).
- 2.15.0

-------------------------------------------------------------------
Thu Oct 26 17:30:30 CEST 2006 - locilka@suse.cz

- Added and fixed firewall.rnc for checking AutoYaST profile
  (#215248).
- 2.14.1

-------------------------------------------------------------------
Mon Oct  9 17:15:19 CEST 2006 - locilka@suse.cz

- Merged SLES10 SP1 branch to openSUSE 10.2.
- 2.14.0

-------------------------------------------------------------------
Mon Oct  2 16:46:11 CEST 2006 - locilka@suse.cz

- Merged proofread texts
- 2.13.13

-------------------------------------------------------------------
Mon Oct  2 09:02:40 CEST 2006 - locilka@suse.cz

- Added missing firewall icon to all dialogs
- Removed warning pop-up message that firewall will be
  started/stopped when it gets enabled/disabled.
- 2.13.12

-------------------------------------------------------------------
Fri Aug 11 10:41:40 CEST 2006 - locilka@suse.cz

- Fixed BuildRequires loop: removing yast2-installation (#198412).
- Added missing SuSEFirewallUI module.
- 2.13.11

-------------------------------------------------------------------
Tue Jul 18 14:56:24 CEST 2006 - locilka@suse.cz

- Summary informs whether the firewall service will be running or
  stopped after the configuration gets written.
- 2.13.10

-------------------------------------------------------------------
Mon Jul 17 11:05:09 CEST 2006 - locilka@suse.cz

- Adding help for Additional Services dialog.
- Checking port ranges for rightness.
- Checking additional services for a common mistake: separating
  entries by a comma instead of a space.
- Most of problems were mentioned in bugzilla bug #190871.
- Fixed appropriate dialog buttons for AbortDialog. Yes/No instead
  of Continue/Cancel (#187078).
- Unified starting and stopping vs. enabling and disabling the
  firewall service. Enabled firewall (start at boot) is started
  immediately after the SuSEFirewall::Write() operation
  and vice versa for disabled firewall (start manually).
- Modified .spec and Make files for building the package.
- 2.13.9

-------------------------------------------------------------------
Wed Jul 12 09:38:02 CEST 2006 - locilka@suse.cz

- Speeding commandline up. Moving commandline definition into the
  separate YCP module SuSEFirewallCMDLine.

-------------------------------------------------------------------
Mon May 22 10:19:23 CEST 2006 - locilka@suse.cz

- Fixing visibility of widgets in Broadcast Configuration (#175920)
- 2.13.8

-------------------------------------------------------------------
Thu Mar 23 08:35:02 CET 2006 - locilka@suse.cz

- Added checking for root permissions into the module startup
  process (#158483)
- 2.13.7

-------------------------------------------------------------------
Mon Mar  6 14:47:19 CET 2006 - locilka@suse.cz

- Adjusted BuildRequires for the package
- 2.13.6

-------------------------------------------------------------------
Mon Feb 13 10:48:01 CET 2006 - locilka@suse.cz

- NetworkManager has changed behavior again. Currently it reports
  its network interfaces so the NetworkManager support from 2.13.3
  is removed (#149075).
- 2.13.5

-------------------------------------------------------------------
Fri Jan 27 09:12:19 CET 2006 - locilka@suse.cz

- merged proofed texts

-------------------------------------------------------------------
Fri Jan  6 15:27:07 CET 2006 - locilka@suse.cz

- Adjusting for SLES10
- 2.13.4

-------------------------------------------------------------------
Wed Jan  4 10:27:52 CET 2006 - locilka@suse.cz

- Adding Network Manager support
- 2.13.3

-------------------------------------------------------------------
Mon Dec 19 13:33:42 CET 2005 - jsuchome@suse.cz

- merged proofed texts
- 2.13.2

-------------------------------------------------------------------
Tue Nov 29 14:55:26 CET 2005 - locilka@suse.cz

- Adding support for handling feature #5998: Port ranges
- 2.13.1

-------------------------------------------------------------------
Fri Sep 23 09:51:30 CEST 2005 - locilka@suse.cz

- Adding support for VNC and SSH installations.
  VNC/SSH can be enabled/disabled by a single click
  (enhancement #113211).
- Adding more help for Advanced configuration of Allowed Services.
  Also with examples (enhancement #104635).
- 2.13.0

-------------------------------------------------------------------
Mon Sep  5 13:30:33 CEST 2005 - locilka@suse.cz

- Fixing bug #112899
  [Advanced...] button had been truncated in some languages because
  of fixed length of the button. Changing UI to stretch when
  needed.
- 2.12.5

-------------------------------------------------------------------
Tue Aug 16 08:57:19 CEST 2005 - locilka@suse.cz

- Fixing bug #104635
  From now, YaST doesn't complain when the additional allowed port
  is a numeric range of ports such as "550:570".
- 2.12.4

-------------------------------------------------------------------
Wed Aug 10 09:30:10 CEST 2005 - locilka@suse.cz

- Fixing Progress in MakeProposal function (installation)
  Patch created by mvidner
- Fixing bug #103196,
  Enabling or Disabling [Change] button when needed
  Activating modification popups when double-clicked on any
  firewall network interface
- 2.12.3

-------------------------------------------------------------------
Thu Jul 28 13:37:41 CEST 2005 - locilka@suse.cz

- Updated desktop file
- 2.12.2

-------------------------------------------------------------------
Thu Jun 30 11:23:01 CEST 2005 - locilka@suse.cz

- Rwalter's Style Guide update (mostly texts)
- 2.12.1

-------------------------------------------------------------------
Thu May 19 08:45:26 CEST 2005 - locilka@suse.cz

- Changed texts and labels to be YaST2 Guidelines-Compatible
- Added popup confirmation for deleting forward rule in Masquerade

-------------------------------------------------------------------
Mon May  9 09:47:42 CEST 2005 - locilka@suse.cz

- Moving "Requires: SuSEfirewall2" to yast2 package

-------------------------------------------------------------------
Tue Apr 19 11:33:44 CEST 2005 - locilka@suse.cz

- Applied new functional interface of ProductFeatures
- 2.12.0

-------------------------------------------------------------------
Fri Mar  4 09:05:56 CET 2005 - locilka@suse.cz

- fixed bug #67335
  Fixed unnecessary warning aborting the unchanged configuration
- 2.11.11

-------------------------------------------------------------------
Wed Mar  2 12:51:51 CET 2005 - locilka@suse.cz

- merged proofed texts
- 2.11.10

-------------------------------------------------------------------
Wed Mar  2 10:40:40 CET 2005 - locilka@suse.cz

- fixed bug #66119
  Profile Exported for AutoYaST had been lowercased.
  Profile Imported from AutoYaST had been uppercased.

-------------------------------------------------------------------
Mon Feb 21 16:14:46 CET 2005 - locilka@suse.cz

- added shortcuts for UI widgets
- 2.11.9

-------------------------------------------------------------------
Fri Feb  4 09:44:28 CET 2005 - locilka@suse.cz

- added missing comments for translators
- fixed bug installation proposal, tuning the configuration started
  the command line interface unstead of UI
- added descriptive label for no-zone-selected instead of blank ""
- removed colorful Glyphs from the summary
- added disabled Back button into the TreeWidget
- added proofed texts
- 2.11.8

-------------------------------------------------------------------
Mon Jan 31 14:17:01 CET 2005 - locilka@suse.cz

- added feature for better checking of the configuration, user is
  informed if any network interface is not assigned to any firewall
  zone and all network traffic would be blocked there
  (bugzilla #50333)
- 2.11.7

-------------------------------------------------------------------
Tue Jan 25 12:42:52 CET 2005 - locilka@suse.cz

- replaced SuSEfirewall2_final with SuSEfirewall2_setup for
  checking whether SuSEfirewall2 is running (bugzilla #50157)
- 2.11.6

-------------------------------------------------------------------
Mon Jan 17 13:24:35 CET 2005 - locilka@suse.cz

- Added comments for translators (CommandLine)
- Added CommandLine and UI handling in RedirectToMasquerade
  functionality to follow iptables/SuSEfirewall2 syntax
- Fixed redrawing of allowed services after AdditionalServices
  added
- Fixed StartNow(), StopNow() and SaveAndRestart() functionality to
  change the final service status after Write() operations
- 2.11.5

-------------------------------------------------------------------
Tue Jan 11 16:13:20 CET 2005 - locilka@suse.cz

- Added CommandLine support

-------------------------------------------------------------------
Mon Jan  3 10:23:53 CET 2005 - locilka@suse.cz

- Adjusted start/stop dialog for new CWM functionality (own
  functions for starting and stopping)
- More informative Summarization
- Support for new SuSEfirewall2's broadcast implementation
- Added help texts
- 2.11.4

-------------------------------------------------------------------
Tue Dec 21 09:09:09 CET 2004 - locilka@suse.cz

- New implementation of yast2-firewall UI (in progress)
- 2.11.3

-------------------------------------------------------------------
Wed Oct 27 16:58:50 CEST 2004 - mvidner@suse.cz

- Adjusted for changes in Mode.
- 2.11.2

-------------------------------------------------------------------
Tue Oct 19 13:00:10 CEST 2004 - locilka@suse.cz

- Fixed debug and error messages in log

-------------------------------------------------------------------
Sun Oct  3 01:53:28 CEST 2004 - nashif@suse.de

- #46262: Firewall is always enabled
- Firewall settings not written during autoinstall

-------------------------------------------------------------------
Fri Sep 24 17:19:14 CEST 2004 - locilka@suse.cz

- fixed bug #46043
  firewall enabled in network proposal was not disabled when user
  went back again to the network proposal and disabled it
- 2.10.12

-------------------------------------------------------------------
Mon Sep 20 09:01:46 CEST 2004 - locilka@suse.cz

- fixed bug #45440
  although special ipppX ISDN devices were proposed as external
  devices, they weren't offered in combobox in the firewall
  editation as a single item
- 2.10.11

-------------------------------------------------------------------
Tue Sep 14 12:37:30 CEST 2004 - locilka@suse.cz

- default values enable_firewall and open_ssh were moved into the
  control file #45240
- fixed texts to be matching the actual state of the naming of
  network interfaces #45209

-------------------------------------------------------------------
Mon Sep 13 09:08:37 CEST 2004 - locilka@suse.cz

- fixed SuSEfirewall2 defaults to be the same as in the SFW2
  package (FW_PROTECT_FROM_INTERNAL=no FW_AUTOPROTECT_SERVICES=no).
- added ISDN::NetDeviceList() into the firewall proposal to catch
  just configured devices.
- fixed testsuites
- 2.10.10

-------------------------------------------------------------------
Fri Sep 10 12:30:33 CEST 2004 - locilka@suse.cz

- fixed bug #44966, forgot text in CWMFirewall marked for
  translation.

-------------------------------------------------------------------
Tue Sep  7 12:43:01 CEST 2004 - locilka@suse.cz

- fixed bug #44759 because of chaned defaults, firewall wasn't
  written in normal mode configuration
- 2.10.9

-------------------------------------------------------------------
Mon Sep  6 13:35:07 CEST 2004 - locilka@suse.cz

- added SetModified() function to autoyast
- 2.10.8

-------------------------------------------------------------------
Mon Sep  6 09:01:35 CEST 2004 - locilka@suse.cz

- fixed #44650 Function ActivateConfiguration now tests if you
  really want to activate (start) the configuration (not only if
  you call this function).
- 2.10.7

-------------------------------------------------------------------
Fri Sep  3 12:44:38 CEST 2004 - locilka@suse.cz

- fixed #44656 Firewall in install proposal is disabled by default
  if there are any dial-up interfaces, they are proposed as
  external interfaces, other interfaces as internal interfaces and
  the firewall is proposed to be enabled.

-------------------------------------------------------------------
Thu Sep  2 09:06:36 CEST 2004 - locilka@suse.cz

- fixed #44566 Wrong handling with newly added interfaces into the
  user-changed firewall proposal in the installation
- fixed #44463 Firewall can be disabled in autoyast, added dialog
  taken from the installation proposal
- fixed #44568 Firewall didn't inform about UDP and RPC services
  in the autoyast summary
- fixed #44569 Firewall in autoyast was getting interfaces from
  the running system instead of the autoyast settings

-------------------------------------------------------------------
Mon Aug 30 16:33:00 CEST 2004 - locilka@suse.cz

- 2.10.6

-------------------------------------------------------------------
Mon Aug 30 14:38:35 CEST 2004 - locilka@suse.cz

- added NFS-Server, NFS-Client, NIS-Server support
- added functions for searching FW_SERVICES_XXX_RPC for serv. supp.

-------------------------------------------------------------------
Mon Aug 30 13:33:00 CEST 2004 - jsrain@suse.cz

- added CWMFirewallInterfaces::Modified () function (#44106)
- allowed CWMFirewallInterfaces to be used if Mode::config (#43904)

-------------------------------------------------------------------
Fri Aug 27 16:50:39 CEST 2004 - locilka@suse.cz

- added allowing broadcast messages into ipp-client service
- modified testsiutes to support new broadcast option
- merged proofreaded UI messages
- fixed Bugzilla bug #40287, helptext for Traceroute improved

-------------------------------------------------------------------
Fri Aug 27 11:23:55 CEST 2004 - visnov@suse.cz

- fix HaveService() for any device (join separated by spaces)

-------------------------------------------------------------------
Thu Aug 26 12:48:38 CEST 2004 - locilka@suse.cz

- changed RunServiceSupport() to support all groups of interfaces
- created testsuites for all global functions

-------------------------------------------------------------------
Tue Aug 24 15:13:23 CEST 2004 - locilka@suse.cz

- removed "SSH open by default" from the Instalation Proposal

-------------------------------------------------------------------
Mon Aug 23 17:03:47 CEST 2004 - locilka@suse.cz

- added functionality for adding/removing devices into/from
  user-changed configuration in network proposal
- 2.10.5

-------------------------------------------------------------------
Fri Aug 20 11:31:20 CEST 2004 - locilka@suse.cz

- fixed Bugzilla bug #43975
  FW wasn't started in install proposal when user didn't change it
- 2.10.4

-------------------------------------------------------------------
Mon Aug 16 10:21:50 CEST 2004 - locilka@suse.cz

- added functions SetModified() and GetModified()
- added call SetModified() in all Set*() functions
- changed selecting/deselecting additional TCP/UDP services
- 2.10.3

-------------------------------------------------------------------
Tue Aug 10 09:39:32 CEST 2004 - locilka@suse.cz

- merged proofread messages
- added support for NTP

-------------------------------------------------------------------
Fri Aug  6 13:45:35 CEST 2004 - jsrain@suse.cz

- disable firewall enabling checkbox after all interfaces were
  deselected in interface selection popup

-------------------------------------------------------------------
Thu Aug  5 10:17:17 CEST 2004 - locilka@suse.cz

- added support for ipp, LDAP and LDAPS
- 2.10.2

-------------------------------------------------------------------
Wed Aug  4 16:52:53 CEST 2004 - locilka@suse.cz

- added new functionality for enabling/disabling services defined
  as list of ports and special functions
- added global handling for other YaST modules

-------------------------------------------------------------------
Fri Jul 30 10:30:30 CEST 2004 - jsrain@suse.cz

- added popup (CWM widget) for selecting interfaces to open in
  firewall
- added the CWM widget for openning/closing the firewall

-------------------------------------------------------------------
Wed Jul 21 09:50:51 CEST 2004 - locilka@suse.cz

- added firewall proposal (for network proposal)
- 2.10.1

-------------------------------------------------------------------
Tue Jun 15 15:05:57 CEST 2004 - msvec@suse.cz

- 2.10.0

-------------------------------------------------------------------
Tue May  4 10:01:48 CEST 2004 - mvidner@suse.cz

- merged proofread messages
- 2.9.12

-------------------------------------------------------------------
Fri Apr  2 16:05:45 CEST 2004 - msvec@suse.cz

- fixed network configurations listing
- changed license to GPL
- 2.9.11

-------------------------------------------------------------------
Wed Mar 31 17:57:23 CEST 2004 - msvec@suse.cz

- fixed [Back] button behavior in step 2 (#37700)
- 2.9.10

-------------------------------------------------------------------
Wed Mar 10 01:47:00 CET 2004 - sh@suse.de

- V 2.9.9
- Migration to new wizard

-------------------------------------------------------------------
Tue Mar  9 11:30:07 CET 2004 - lnussel@suse.de

- cast to string only if it's indeed a string to fix feature dialog
- 2.9.8

-------------------------------------------------------------------
Mon Mar  8 17:09:00 CET 2004 - msvec@suse.cz

- set title icon
- 2.9.7

-------------------------------------------------------------------
Fri Mar  5 11:28:58 CET 2004 - msvec@suse.cz

- more strict type casts
- 2.9.6

-------------------------------------------------------------------
Wed Mar  3 13:34:05 CET 2004 - visnov@suse.cz

- fixed type info

-------------------------------------------------------------------
Tue Mar  2 12:30:43 CET 2004 - lnussel@suse.de

- add option to allow IPsec traffic
- 2.9.5

-------------------------------------------------------------------
Fri Feb 20 11:53:17 CET 2004 - lnussel@suse.de

- fix warnings about useless global
- move masquerading setting to top so users find it easier
- state that the expert service config configures TCP services
- 2.9.4

-------------------------------------------------------------------
Sat Feb  7 18:32:01 CET 2004 - msvec@suse.cz

- fixed testsuite output
- 2.9.3

-------------------------------------------------------------------
Fri Feb  6 14:37:24 CET 2004 - msvec@suse.cz

- drop y2cc config file
- 2.9.2

-------------------------------------------------------------------
Tue Feb  3 10:27:44 CET 2004 - visnov@suse.cz

- use Sequencer module instead of WizardSequencer

-------------------------------------------------------------------
Mon Jan 26 15:31:04 CET 2004 - msvec@suse.cz

- updated for the new interpreter
- 2.9.1

-------------------------------------------------------------------
Tue Dec  2 17:11:48 CET 2003 - msvec@suse.cz

- extended help text (#33394)
- 2.9.0

-------------------------------------------------------------------
Sun Sep 14 16:31:34 CEST 2003 - adrian@suse.de

- let it work in kcontrol again
- 2.8.13

-------------------------------------------------------------------
Sat Sep 13 18:46:58 CEST 2003 - nashif@suse.de

- #30291: return list of needed packages for autoinstall

-------------------------------------------------------------------
Fri Aug 29 16:27:18 CEST 2003 - visnov@suse.de

- fix #29659 (syntax errors)
- 2.8.11

-------------------------------------------------------------------
Mon Aug 25 15:35:42 CEST 2003 - visnov@suse.de

- clarify a help text
- 2.8.10

-------------------------------------------------------------------
Wed Aug 20 15:56:03 CEST 2003 - jsuchome@suse.de

- removed redundant "initialization dialog" (#28779)
- 2.8.9

-------------------------------------------------------------------
Mon Aug 11 10:04:29 CEST 2003 - visnov@suse.de

- merged in proofread texts
- 2.8.8

-------------------------------------------------------------------
Tue Aug  5 08:03:04 CEST 2003 - visnov@suse.de

- read and write also DMZ/INT/EXT services and all interfaces
- 2.8.7

-------------------------------------------------------------------
Mon Aug  4 22:33:38 CEST 2003 - nashif@suse.de

- Fixed sequence for autoyast
- 2.8.6

-------------------------------------------------------------------
Mon Aug  4 16:43:03 CEST 2003 - visnov@suse.de

- added API for enabling and disabling services
- added desktop file
- 2.8.5

-------------------------------------------------------------------
Wed Jul 30 17:51:37 CEST 2003 - msvec@suse.cz

- further sources and texts cleanup
- 2.8.4

-------------------------------------------------------------------
Tue Jul 22 14:41:34 CEST 2003 - msvec@suse.cz

- sources cleanup and fixes
- 2.8.3

-------------------------------------------------------------------
Tue Jul 15 15:10:57 CEST 2003 - msvec@suse.de

- fix the help text (#27857)
- updated testsuite
- 2.8.2

-------------------------------------------------------------------
Fri Jun 27 00:11:24 CEST 2003 - msvec@suse.cz

- updated to the current yast2 interface
- added minimal testsuite
- 2.8.1

-------------------------------------------------------------------
Fri Mar  7 02:29:16 CET 2003 - nashif@suse.de

- dont clone unconfigured firewall ( #24792 )
- 2.7.7

-------------------------------------------------------------------
Tue Mar  4 14:23:58 CET 2003 - mvidner@suse.de

- Texts from final proofreading.
- 2.7.6

-------------------------------------------------------------------
Wed Feb 26 04:38:31 CET 2003 - nashif@suse.de

- fixed bug when writing config in autoinst mode (#24221)
- Use Runlevel to set runlevels
- Improved Write function and removed duplicate code
- 2.7.5

-------------------------------------------------------------------
Thu Feb 20 02:12:09 CET 2003 - nashif@suse.de

- bug #23887: Finish installation after configuration is written
- Using common text: Finish instead of Quit.
- 2.7.4

-------------------------------------------------------------------
Mon Feb 17 16:39:05 CET 2003 - nashif@suse.de

- Read configuration if firewall is activated
- 2.7.2

-------------------------------------------------------------------
Wed Feb  5 17:31:33 CET 2003 - lnussel@suse.de

- apply proof read texts

-------------------------------------------------------------------
Mon Feb  3 08:31:47 CET 2003 - nashif@suse.de

- use SuSEFirewall module
- added autoinstallation support
- removed obsolete _write client

-------------------------------------------------------------------
Thu Jan 30 18:08:59 CET 2003 - lnussel@suse.de

- apply proof read texts
- 2.7.0

-------------------------------------------------------------------
Mon Sep  2 13:52:48 CEST 2002 - mvidner@suse.cz

- Fixed firewall deactivation (broken by stricter insserv) (#18735).
- 2.6.6

-------------------------------------------------------------------
Tue Aug 27 20:00:00 CEST 2002 - jsuchome@suse.cz

- provide/obsolete old translation packages

-------------------------------------------------------------------
Mon Jul 22 16:37:08 CEST 2002 - lnussel@suse.de

- more proof read texts
- import Wizard instead of including it

-------------------------------------------------------------------
Fri Jul 12 16:35:48 CEST 2002 - arvin@suse.de

- use proper namespace for Args and CallFunction (#16776)

-------------------------------------------------------------------
Thu Jul 11 14:53:29 CEST 2002 - lnussel@suse.de

- re-insert proof read texts

-------------------------------------------------------------------
Mon Jul 08 15:29:30 CEST 2002 - arvin@suse.de

- moved non binary files to /usr/share/YaST2

-------------------------------------------------------------------
Tue Jul 02 16:57:39 CEST 2002 - arvin@suse.de

- removed personal-firewall.scr (use the one from yast2-network)

-------------------------------------------------------------------
Mon Jul  1 17:50:26 CEST 2002 - msvec@suse.cz

- renamed to yast2-firewall
- 2.6.0

-------------------------------------------------------------------
Fri Mar  8 13:55:47 CET 2002 - lnussel@suse.de

- fix error dialog to display stdout and stderr, add TERM=raw to the
  environment of the initscript to avoid escape sequences (#14695)

-------------------------------------------------------------------
Thu Feb 28 19:46:14 CET 2002 - mike@suse.de

- undo "insert proofreaded texts" because the translation are
  based on not proofreaded texts

-------------------------------------------------------------------
Thu Feb 21 11:58:04 CET 2002 - lnussel@suse.de

- marked two more strings for translation

-------------------------------------------------------------------
Thu Feb 21 11:40:55 CET 2002 - lnussel@suse.de

- dialogs for stopping the firewall

-------------------------------------------------------------------
Tue Feb 19 15:49:09 CET 2002 - lnussel@suse.de

- use /etc/sysconfig/personal-firewall
- minor fixes

-------------------------------------------------------------------
Mon Feb 18 16:08:18 CET 2002 - mike@suse.de

- first working version

-------------------------------------------------------------------
Tue Feb 12 12:03:26 MET 2002 - tom@suse.de

- Renamed menuentry_firewall.y2cc ---> menuentry_firewall2.y2cc (conflict)

-------------------------------------------------------------------
Fri Feb  8 20:40:48 MET 2002 - tom@suse.de

- Now checked into STABLE

-------------------------------------------------------------------
Fri Feb  8 15:59:22 2002 - mike@suse.de

- initial version

Places

File yast2-firewall.changes of Package yast2-firewall (Revision f45eda892e915ae58035ed45738e8bab)

Places