openSUSE Build Service

Overview Repositories Revisions Requests Users Attributes Meta

File tqsl.changes of Package tqsl (Revision d5d6281b3e883e0ca9006d713493bbfb)

Currently displaying revision d5d6281b3e883e0ca9006d713493bbfb , Show latest

-------------------------------------------------------------------
Wed Aug  5 07:00:29 UTC 2020 - Walter Fey <dl8fcl@darc.de>

- update to version 2.5.5 RC
  * When TQSL cannot find a matching Callsign Certificate for DXCC entity NONE
    when signing a log, add "None" to the resulting error message.
  * Correct a defect where TQSL on Windows could hang if both a TQSL and a
    configuration file update appeared at the same time.
  * Update the list of modes in the TQSL ADIF Editor to include all current modes.
  * Allow the TQSL ADIF editor to retain all fields in an ADIF file, not just
    the ones Logbook stores.
  * Correct handling of logs from Quebec, where Logbook uses the old "PQ"
    abbreviation versus the current "QC".
  * Correct defects in TQSL when in "update" mode while signing a log to avoid
    crashes when a Callsign change caused zones, states, counties, etc. to
    become invalid.
  * When processing a bad Cabrillo "QSO" record, if it cannot be parsed,
    discard it versus repeatedly displaying the same error and never completing.
  * Accept full administrative subdivision names, so ADIF files with "New York"
    for MY_STATE versus the proper "NY" won't cause errors.
  * When signing a log with multiple gridsquares and comparing to a station
    location, allow those gridsquares to be in arbitrary order.

-------------------------------------------------------------------
Fri May 15 23:08:56 UTC 2020 - Walter Fey <dl8fcl@darc.de>

- update to version 2.5.4
  * Pass the DXCC entity to the address lookup server at ARRL for cases where
    a call is valid for multiple entities
  * Correct a defect where callsigns were treated as case-sensitive, meaning
    that <OPERATOR:4>k1mu would not match K1MU in the related callsign
    certificate.
  * Correct a defect that could cause some P12 files to fail to load.
  * Fix the matching for US Counties to be more accepting of variations of
    spelling, spaces, etc.
  * Fix the defect that causes random DXCC entity names to be displayed when
    a new TQSL config file is installed (until TQSL restarts)

-------------------------------------------------------------------
Sat Apr 18 07:10:25 UTC 2020 - Walter Fey <dl8fcl@darc.de>

- update to version 2.5.3
  * Properly limit the length of callsigns.
  * Select the proper callsign for stations with calls used from multiple
    entities.
  * Allow leading zeroes in the values for CQ Zone (MY_CQZ) and ITU Zone
    (MY_ITUZ).
  * Fix the reporting when a callsign certificate is not available for a
    callsign specified in a logto state that it’s a missing callsign
    certificate, not a date range issue.
  * Report on more ADIF errors –badly spelled counties, incorrect counties
    (“NY,Boston”)
  * Ignore leading and trailing whitespace in ADIF values.
  * Ignore callsign fields (OPERATOR, STATION_CALLSIGN, OPERATOR_CALLSIGN)
    in ADIF files to work around defective logging programs.
  * When a Station Location has empty values, use the QTH details from the
    log being signed.

-------------------------------------------------------------------
Tue Apr  7 16:20:16 UTC 2020 - Walter Fey <dl8fcl@darc.de>

- update to version 2.5.2
  support roaming operations
  detect cases where stations sign logs using incorrect locations

-------------------------------------------------------------------
Sun Nov 17 11:40:22 UTC 2019 - Walter Fey <dl8fcl@darc.de>

- update to version 2.5.1
  No longer display spurious error message about expired root certificates
  When editing an existing station location, forces default values
  Correct ADIF output from the embedded ADIF editor
  Correct a defect that could cause a crash when backing up to a .TBK file.
  Use an ARRL-supplied web service with ULS data to pre-fill station location
    information.
  No longer ask for passwords for callsign certificates when they are created.
  Ensure that requests for US 1x1 callsigns are properly marked
  DXCC entity list, deleted entities moved to the end.
  The word “DELETED” in the entity name is now localizable.
  Chage “duplicate” to “previously uploaded”
  Verify that the user is able to write files to the TQSL working directory.
  Restrict the number of callsign certificate requests to 3 times in 24 hours. 
  When creating a callsign certificate request, TQSL for the kind of callsign first.
  When an ADIF file has a valid BAND and FREQ or RX_FREQ outside, the frequency
    is ignored.
  Error message when a callsign certificate’s private key is missing is now
     more descriptive.
  Translations updated.

-------------------------------------------------------------------
Mon Apr 22 20:38:44 UTC 2019 - Walter Fey <dl8fcl@darc.de>

- update to version 2.4.7
  Correct defect that keeps TQSL updates on Windows from working properly.
  2.4.6
  Fix error messages for Windows command line users. The text was
  garbled due to changes made to implement Unicode on Windows
  (no changes for Linux or Mac).

-------------------------------------------------------------------
Mon Apr  8 22:31:35 UTC 2019 - Walter Fey <dl8fcl@darc.de>

- update to version 2.4.5
  Fixed formatting of output from command-line operations on
  Windows systems.
  2.4.4
  Add localization for Turkish.
  Add support for a 64-bit build for MacOS. Add an indicator of what
   platforms are supported for an Mac build (i386/ppc or x86_64/i386).
  Fix error that was keeping the State and County from being defaulted
   whencreating a new Station Location.
  Add another callsign certificate request type - one for a new
   callsign for the primary user.
  Add language support for Polish. Fix problem that was keeping
   Hindi from properly displaying on Windows.

-------------------------------------------------------------------
Mon Dec  3 20:35:01 UTC 2018 - dl8fcl@darc.de

- update to version 2.4.3
  Bugfix release: Fix defect that was causing location details to
  revert to those from the callsign data.

-------------------------------------------------------------------
Mon Dec  3 20:19:27 UTC 2018 - dl8fcl@darc.de

- update to version 2.4.2
  1. Fixed spurious error message when TQSL doesn't have a translation
     available for the local language.
  2. Clearly state the cause when the user's private key is not
     installed
  3. Add detail to the callsign certificate "Properties" display
     to state that the callsign's private key is missing
  4. Allow TQSL updates to work on Windows systems where the user's
     home directory has a space embedded.
  5. Emit the final status message in English when that is not the
     local language (when called by a logging program, for example.)
  6. Ensure that, when available, CQ and ITU zones have default
     values for a Station Location definition.
  7. Correct a defect that causes TQSL updates on Windows to fail
     when the username has embedded spaces.
  New features: The Cabrillo format has been updated to allow Digital
  mode QSOs to be specified with mode "DG".
  TQSL now allows a user to add their own custom mode mappings,
  supplying a default mapping from DG to DATA.

-------------------------------------------------------------------
Mon Oct  8 08:28:03 UTC 2018 - dl8fcl@darc.de

- CXXFLAGS added to build Leap 42.3

-------------------------------------------------------------------
Sat Oct  6 22:22:23 UTC 2018 - dl8fcl@darc.de

- update to version 2.4.1

-------------------------------------------------------------------
Mon Sep 24 07:12:09 UTC 2018 - dl8fcl@darc.de

- update to version 2.4.1 RC2

-------------------------------------------------------------------
Fri Sep 14 20:28:04 UTC 2018 - dl8fcl@darc.de

- update to version 2.4.1 RC1
  * Fix defect that was causing callsign certificate renewals to
    have "null null null" as the Name in some conditions.
  * Fix defect that was required deleting an existing callsign
    certificate before importing a replacement .P12 file.
  * Ensure that duplicate callsign certificates aren't displayed

-------------------------------------------------------------------
Thu May 24 19:35:43 UTC 2018 - dl8fcl@darc.de

- update to version 2.4
  uses an ARRL-supplied source of public information (when it is available)
  to pre-fill information on Station Locations and Callsign Certificate requests
  Grid square entry is now validated against the location for the station's callsign.

fixes the most common cause of users being unable to download and use the
  .TQ6 file downloaded from the Logbook site in order to recover callsign certificates.

Hindi localization

-------------------------------------------------------------------
Thu May 18 22:05:08 UTC 2017 - dl8fcl@darc.de

- update to version 2.3.1
  Add the ADIF satellite name to the pulldown menu in the ADIF editor to allow
  satellites to be more easily looked up.

Add 'Saving QSOs' to the messages to be translated.

Add Finnish translation from Juhani, OH8MXL.

When renewing a callsign certificate and backing up to earlier pages in the wizard,
  don't display a spurious certificate type selection page.

When editing an ADIF file that has an invalid mode setting,
  notify the user that it is being ignored.

Fix password prompt on systems with debug assertions enabled in wxWidgets.

Correct the invocation of the Windows Installer when an update is available.

Correct the counts reported when duplicate QSOs are found along with QSOs
  with other errors.

Allow 'LIGHT' in a Cabrillo file to represent 300G and higher.

When there are multiple signature specifications in the configuration file,
  choose the one with the highest version number.

Allow TQSL to build against OpenSSL 1.1.0.

Fix formatting of the messages that appear when QSOs change values
  in the station location for duplicate QSOs.

Correct improperly formatted frequencies from ADIF files
  (values like '7.010.20') to remove the extra periods.

Revert the change that stripped spaces in the TQSL configuration file as
  that caused newlines to be removed in places like the station_data file.

Fix "OpenSSL error - bad end line" by ensuring that there's always
  a newline starting a new certificate.

Add the ability to pull DXCC Entity valid date ranges to the TQSL
  configuration file.

-------------------------------------------------------------------
Tue Mar 21 00:12:37 UTC 2017 - dl8fcl@darc.de

- use %cmake macros

-------------------------------------------------------------------
Sat Oct  8 19:35:20 UTC 2016 - dl8fcl@t-online.de

- update to version 2.3
  * more translations
  * A defect that could cause TQSL to fail to import a callsign
  certificate with "OpenSSL error - bad end line" has been corrected.
  * Creating callsign certificate requests for renewal or for new
  requests now verify that the "QSO start date" and "QSO end date"
  match the start and end date for operations from that DXCC entity.
  * When creating a new callsign certificate request, TQSL no longer
  asks if it should be "signed" or not. Instead, TQSL asks what the
  callsign certificate is meant for (personal call, dxpedition,
  club  call, etc.) and chooses the proper approach depending on
  the type of callsign.

-------------------------------------------------------------------
Mon May 23 08:35:03 UTC 2016 - dl8fcl@t-online.de

- update to version 2.2.2
  several bugfixes
  Italian, Japanese, Chinese translations

-------------------------------------------------------------------
Tue Mar 15 12:34:01 UTC 2016 - dl8fcl@t-online.de

- update to version 2.2.1
  1. Restoring an incorrect .TQ6 file when there is a pending callsign
  certificate request could cause the pending request to be deleted. TQSL now
  rejects the invalid TQ6 file and takes no other action.

2. Updating the LoTW configuration file could fail if the user's home
  directory contained non-ASCII characters (Windows only).

3. Ensure that the password prompt window appears on top of other windows
  when a password is requested while signing a log.

4. Correct defect that would cause Cabrillo "Light" mode QSOs (300 GHz) to
  be rejected.

5. Correct handling of unrecognized ADIF MODE/SUBMODE entries to allow
  user-defined modes to be used.

6. Fix a defect on OSX that would cause an incorrect error message to be
  displayed when an incorrect password for a callsign certificate.

New features:
  1. Allow an alternate layout for the user interface that moves the status
  log to a separate tab. This is useful for users with long lists of station
  locations or callsign certificates.

2. Update the duplicates tracking to allow reporting of station location
  changes when the same QSO is signed from more than one station location.

3. Update the ADIF editor to automatically select the appropriate band when
  a frequency is entered.

4. Add "Replaced' and "Expired" tags  to the callsign certificate
  properties display.

-------------------------------------------------------------------
Thu Dec 31 15:31:25 UTC 2015 - dl8fcl@t-online.de

- update to version 2.2
  Allow the National Parks on the Air contest identifiers to be
  seamlessly added to Station Locations.
  No longer displays 'Invalid argument" when an incorrect password
  is entered when renewing a password-protected callsign certificate.

-------------------------------------------------------------------
Sun Nov  8 11:55:35 UTC 2015 - dl8fcl@darc.de

- update to version 2.1.3

Revert change in the behavior for command line applications.
  TQSL 2.1 changed the behavior for ADIF files to open those with the
  TQSL ADIF editor versus signing them unless "-x" or "-q" were on
  the command line. This was an incompatible change that is not
  consistent with the documentation and was removed.

Fix defect that could cause newly imported callsign certificates
  to be deleted after the import completed.

-------------------------------------------------------------------
Sun Sep 27 21:45:11 UTC 2015 - dl8fcl@darc.de

- update to version 2.1.2
  Portuguese (Portugal) translations from Nuno, CT2IRY
  
  Correct command line parsing defect that causes TQSL to quit without
  signing a log unless a station location is provided on the command line.

Correct the TQSL editor to not use the language settings for decimal
  points as ADIF requires "." as the decimal separator.

-------------------------------------------------------------------
Sun Sep 13 21:15:53 UTC 2015 - dl8fcl@darc.de

- update to version 2.1.1
  A lot of feature enhancements and bug fixes.
  see /usr/share/doc/packages/tqsl/ChangeLog.txt

-------------------------------------------------------------------
Wed Jul 30 22:26:50 UTC 2014 - dl8fcl@darc.de

- update to version 2.0.3
  bugfix, when creating station locations with only one certificate

-------------------------------------------------------------------
Sat Jul 12 23:17:29 UTC 2014 - dl8fcl@darc.de

- update to version 2.0.2
  a lot of bugfixes and improvements

-------------------------------------------------------------------
Sun Dec 15 22:15:14 UTC 2013 - dl8fcl@darc.de

- update to version 2.0.1
  a lot of bugfixes
  TQSL now checks the status of callsign certificates using an
  online service at LoTW

-------------------------------------------------------------------
Wed Nov  6 10:08:57 UTC 2013 - dl8fcl@darc.de

- update to version 2.0
  combines tqslcert and tqsl into a single program,
  added additional documentation for certificate operations
  includes a new, task oriented GUI.

-------------------------------------------------------------------
Sun Aug 11 21:43:05 UTC 2013 - dl8fcl@darc.de

- update to version 1.14.3
  fix for the command line tool when detecting a new version

-------------------------------------------------------------------
Sun Jun 30 22:35:54 UTC 2013 - dl8fcl@darc.de

- import into buildservice

Substitude for package TrustedQSL

update to version 1.14.2
  tqsllib is now included in this package
  Log files can be signed and uploaded over the internet to LoTW in one operation.
  Errors in Station Locations are reported (for example, incorrect CQ and ITU zones).
  QSOs that need not be re-submitted (“duplicates”) are brought to the user’s attention.
  Error reporting has been improved.
  Users are notified when a new version becomes available.
  Documentation has been improved.

Places

File tqsl.changes of Package tqsl (Revision d5d6281b3e883e0ca9006d713493bbfb)

Places