openSUSE Build Service

Overview Repositories Revisions Requests Users Attributes Meta

File wsjtx.changes of Package wsjtx (Revision 33358cd0e8c332965b97ce524cbc9d75)

Currently displaying revision 33358cd0e8c332965b97ce524cbc9d75 , Show latest

-------------------------------------------------------------------
Mon Jan  3 23:47:41 UTC 2022 - Walter Fey <dl8fcl@darc.de>

- update to version 2.5.4
  * Repair a defect that caused occasional crashes when in QSO with 
    stations using nonstandard callsigns.

-------------------------------------------------------------------
Tue Dec 14 09:08:48 UTC 2021 - Walter Fey <dl8fcl@darc.de>

- update to version 2.5.3
 * Add a note in memory of G4WJS to the About window
 * Add a simple $DXCALL macro capability for Tx messages, and update
   the User Guide accordingly
 * Ensure that MAIN VFO is used for receiving on rigs that require it
 * Repair a defect in reporting low-confidence decodes to PskReporter
 * Updated CTY.DAT database, tnx to Jim AD1C

-------------------------------------------------------------------
Fri Nov  5 10:07:06 UTC 2021 - Walter Fey <dl8fcl@darc.de>

- update to version 2.5.2
  * Repair a longstanding regression that caused si
    tail-ended Tx2 messages to be omitted from logged information
  * Parse "dx-call-1 RR73; dx-call-2 <de-call> +nn" messages (i3=0,
    n3=1 DXpedition mode) in regular 77-bit modes
  * Repair a regression associated with setting the main window width
    on program startup.
  * Repair a problem with Q65 decodes of type 'q3' for messages of the
    form "<Call_1> Call_2"
  * Execute code associated with Q65 decodes of type 'q5' only when the
    Max Drift control is set to 50. This fix prevents
    double-incrementing of the message averaging counter on the first
    decoding sequence.
  * Polarization offset 'Dpol' from the astronomical data window is now
    written to file azel.dat if environment variable
    WSJT_AZEL_EXTRA_LINES has been defined as 1 or greater. Dpol is
    especially useful for EME on the higher microwave bands.
  * The Auto Log QSO option in "Settings->Reporting" now behaves the
    same as the Prompt to log QSO option when not in a special
    operating context mode.
  * The Fast/Normal/Deep setting in Q65 mode is now a sticky setting
    and is no longer reset to Fast on program startup or when Settings
    has been opened. The user selection is used for automatic decodes,
    but Deep is used for any subsequent manual decode attempts.
  * New hamlib code to correct minor flaws in controlling several rigs.
  * Update the Chinese and Hong Kong translations of the user
    interface.

-------------------------------------------------------------------
Fri Oct 22 06:51:58 UTC 2021 - Walter Fey <dl8fcl@darc.de>

- update to version 2.5.1
  - Improved Q65 support for 10GHz Aircraft Scatter contributed by Rex,
    VK7MO, and Roger, W3SZ. (See "10 GHz Terrestrial with Q65" in DUBUS
    Vol 1/2021 page 64.)  Decodes of type 'q3' may now include
    corrections for frequency drift.
  - Repair a defect that failed to pre-load the DE and DX calls to the
    hash lookup tables in the Q65 decoder.
  - Repair standard message Tx4 and Tx5 generation in Q65 mode when
    using a non-standard call.
  - Repair a defect in generation of the standard Tx2 JT65 message in
    EME mode when using a compound call.
  - Repair a defect when decoding 77-bit type 4 non-standard call
    message.
  - Repair a defect that could cause a crash when switching from Q65 to
    JT65 mode and attempting a double-click decode.
  - Enable 'q3' AP decoding in Q65 mode for messages containing a
    non-standard call.
  - Repair a defect that required a blank DX Grid to achieve Q65 'q3'
    decodes of messages containing a non-standard call.
  - Repair the logic that sets parameters for Q65 "Deep" decoding.
  - In Q65 mode, allow 'q2' decodes when MyCall is compound or
   non-standard.
  - Repair a long-standing defect that could cause a crash when
   reference spectrum correction is enabled.
  - Updated UI translations from Xavi, EA3W, Oba-san, JA7UDE, and a new
    translation for Traditional Chinese by Steven, BU2EL.
  - Updated CTY.DAT database, tnx to Jim AD1C
  - Improved main window layout to ensure TxN messages are fully
    visible.

-------------------------------------------------------------------
Mon Sep 27 19:15:46 UTC 2021 - Walter Fey <dl8fcl@darc.de>

- update to version 2.5.0
  - Repair a defect that caused CAT errors when using WSPR band hopping
    and auto tune-up with some Icom rigs.
  - Ensure that CALL3.TXT is not  deleted while updating the file (this
    allows sharing using symlinks to work).

-------------------------------------------------------------------
Tue Sep  7 08:54:01 UTC 2021 - Walter Fey <dl8fcl@darc.de>

- update to version 2.5.0-rc6
  - Repair a file handle leak in wsprd (tnx Phil, KA9Q).
  - Better handling of the Tx1 buttons when changing special operating
    modes.
  - Q65 mode now supports contest special operating modes.
  - Repair an issue when non-ASCII characters used in account names.
  - Repair a regression that prevented WSPR band-hopping working when
    the Tx percentage is zero.

-------------------------------------------------------------------
Sat Aug  7 21:37:49 UTC 2021 - Walter Fey <dl8fcl@darc.de>

- update to version 2.5.0-rc5
  * Repair a regression that caused some messages involving compound
    or nonstandard callsigns to be encoded as free text

-------------------------------------------------------------------
Wed Aug  4 08:12:38 UTC 2021 - Walter Fey <dl8fcl@darc.de>

- update to version 2.5.0-rc4
  - Repair a defect in CALL3.TXT lookups that incorrectly matched
    partial calls
  - Instructions in macOS ReadMe.txt to suppress App Nap energy saving
  - Revised User Guide using FT8 mode for the basic tutorial
  - Allow contest and FD operating in Q65 mode

-------------------------------------------------------------------
Mon Jul  5 14:21:06 UTC 2021 - Walter Fey <dl8fcl@darc.de>

- update to version 2.5.0-rc3
 - Repair a long standing defect that caused UDP Protocol Heartbeat
   messages to not be sent when no other intervening messages are
   sent.

-------------------------------------------------------------------
Mon Jun 28 17:15:52 UTC 2021 - Walter Fey <dl8fcl@darc.de>

- update to version 2.5.0-rc2
MAP65:
 - Compute polarization angle for Xpol systems and display to nearest
   degree
 - Compute and display the recommended Tx polarization
 - Protect against Fortran bounds errors in several places
 - Insert leading 0 when needed in UTC hours and minutes on waterfall
 - Wideband Q65 synchronization corrected to include single-polarization
   mode
 - Corrected a one-symbol (0.6 s) delay in Q65 Tx audio
 - Basic instruction document for building an MS Windows portaudio DLL
   for MAP65 users who are unable to use WDM/KS drivers for their
   multi-channel sound cards.
WSJT-X (including the decoder for Q65  used by MAP65):
 - Increase maximum DT to 5.5 s when EME decoding is enabled in Q65
 - Fix generation of Tx5 message when "hiscall" has suffix /P or /R.
 - Improve width management of GUI's band-selection combo box
 - Restore plotting of Q65 sync curve after a q3 decode
 - Disable selection of "View | Message Averaging F7" for modes
   other than JT4 and JT65
 - Switching to Q65 mode now defaults to "Decode | Fast"
 - Repair a long standing regression with message generation for
   72-bit modes when using a compound callsign.
 - Repair a defect in diagnostic logging that could cause crashes on
   some platforms.
 - Repair a defect which failed to strip leading and trailing spaces
   on input of callsigns during validation.
 - Hamlib updates including repair of defects with PTT handling on a
   separate serial port via rigctld, delayed PTT with Elecraft K3
   series rigs, and support for the Icom IC-575 rig.
 - Updated CTY.DAT database

-------------------------------------------------------------------
Fri Jun  4 06:59:39 UTC 2021 - Walter Fey <dl8fcl@darc.de>

- update to version 2.5.0-rc1
  * Q65 decoder has been enhanced to measure and compensate for linear
    frequency drift in Q65 signals.
  * FST4W mode no longer saves .WAV files when "Menu->Save->None" is
    checked.

-------------------------------------------------------------------
Thu May 27 06:47:03 UTC 2021 - Walter Fey <dl8fcl@darc.de>

- Corrections to WSJT-X User Guide, thanks to LA6VQ.

-------------------------------------------------------------------
Tue May 25 12:03:42 UTC 2021 - Walter Fey <dl8fcl@darc.de>

- update to version 2.4.0
 - Repair a defect with own call decode highlighting when callsigns
   with a common root are decoded.
 - Q65 message averaging correctly disabled as be menu option.
 - Repair a regression with missing timestamps in AlL.TXT for the
   MSK144 mode.
 - Repair a defect in the selection of working frequencies matching
   the current band and mode combination.
 - WSPR band hopping mode now generates a tune up tone for bands where
   it is scheduled to transmit.
 - Repair a long standing defect per band tune and Tx power level
   memories.
 - More flexibility for inputting calls into the DX Call field,
   leading and trailing white space characters are allowed but
   ignored.

-------------------------------------------------------------------
Sat Mar 27 08:06:44 UTC 2021 - Walter Fey <dl8fcl@darc.de>

- update to version 2.4.0-rc4
  - Correct a problem with display of Q65 sync curves for submodes
    Q65-120x and Q65-300x.
  - Audio frequency and decoded message are now saved for up to 100
    most recent Q65 decodes.  Subsequent double-click on waterfall will
    search the list for the clicked frequency +/- 10 Hz, recover
    "DXCall" from the mosr recent decode there, and attempt a decode at
    that frequency with full "q3" sensitivity.
  - Use new ADIF recommendations for Q65: mode=MFSK, submode=Q65.
  - If "Single decode" is unchecked, look for Q65 decodes from
    accumulated average even after obtaining a single-sequence
    decode at selected Rx Freq.
  - For data read from .wav files, display the original UTC (derived
    from file name) on the waterfall instead of current UTC.
  - Protect against bounds errors caused by unusual settings on the
    Wide Graph.
  - Correct a problem with Split operation in FT4 mode.  Thanks to
    JG1APX.
- version 2.3.1
  - When  sending traffic  to a  multicast UDP  server ensure  that the
    local loop-back interface is used if no others are selected.
  - Repair  a defect  in instance  lock  file handling  that causes  an
    infinite loop on start up.
  - Invert the  PTT serial port  sharing default behaviour,  and enable
    sharing when non-Hamlib CAT control  is combined with direct serial
    port PTT control.
  - Allow  the FST4  and FST4W  decoders  to continue  after the  first
    successful decode when using negative  NB values to try multiple NB
    values.
  - Repair defects in auto-sequencing,  particularly with responding to
    a repeated final message. In general a double-click of the repeated
    message now does the right thing.
  - Repair a regression that had  inadvertently disabled EU VHF Contest
    mode when using the MSK144 mode.
  - Repair a defect  that could caused incorrect log  entry fields when
    using FT4 mode and a priori (AP) decoding.
  - Repair defects saving .WAV files for periods with decodes.
  - Offer a new scheme for adjusting macOS shared memory parameters.

-------------------------------------------------------------------
Mon Mar 15 15:57:51 UTC 2021 - Walter Fey <dl8fcl@darc.de>

- update to version 2.4.0-rc3
  - Repaired a memory corruption related to display of Q65_Sync,
    particularly nasty on macOS.
  - Q65 now dissplays two sync curves: orange for the current sequence,
    red for the accumulated average.
  - Behavior of "Save decoded" has been corrected.
  - Repaied a defect that caused crash when displaying the Wide Graph
    with lower frequency limit set to 0.
  - Program no longer terminates a transmission when Settings is
    closed.
  - Program no longer forces TxFreq to 700 or 1000 Hz when entering Q65
    mode or closing Settings.  Instead, it highlights TxFreq with red
    background when its value should be 700 Hz but is not.
  - Program displays a warning label if a contest mode is active in Q65
    mode.
  - Many updates to User Guide, mostly related to Q65.
  - Repaired a regression that disallowed a new QSO initiation after an
    abandoned QSO.

-------------------------------------------------------------------
Fri Mar  5 19:44:29 UTC 2021 - Walter Fey <dl8fcl@darc.de>

- update to version 2.4.0-rc2
 - Repair a defect that caused WSJT-X to crash when launched from an
   icon on macOS.
 - Repair a crash when using the JT4 mode.
 - Sequencing improvements to hold transmitted signal report fixed
   during a QSO.
 - UI translation updates tnx to Sze-to, VR2UPU, and Michael, 5P1KZX.
 - Enable the "Call 1st" option for Q65.
 - Improved Q65 message averaging that linearly averages the first 4
   sequences and averages exponentially thereafter using a
   time-constant of 4 sequences.
 - Improved macOS post-install instructions, tnx to John, G4KLA.
 - Enhanced Q65 simulator that generates file names compatible with
   message averaging, tnx Charlie, G3WDG.
 - Q65 simulator option to generate single tone waveforms, tnx to
   Charlie, G3WDG.
 - Better suppression of birdies in the Q65 decoder.
 - Blank Q65 decode messages removed.
 - Automatic low Tx audio offset for the widest Q65 modes to keep Tx
   signal in transmitter passband, tnx to Charlie, G3WDG.
 - Improved SNR estimates for Q65 mode.
 - Decode depths Fast/Normal/Deep are now identical in Q65 mode.
 - "Save decoded" is now enabled for Q65 mode.
 - The obsolete ISCAT mode has been removed

-------------------------------------------------------------------
Thu Feb  4 00:02:18 UTC 2021 - Walter Fey <dl8fcl@darc.de>

- update to version 2.4.0-rc1
- New Mode Q65 with  excellent characteristics when used for EME on
  VHF through to microwave bands.

-------------------------------------------------------------------
Mon Feb  1 19:33:28 UTC 2021 - Walter Fey <dl8fcl@darc.de>

- update to version 2.3.0
 - FST4/W: Disable envelope  shaping at start and  end of transmission
   when environment variable FST4_NOSHAPING=1. Works for fst4sim too.
 - Add time stamp to error message boxes to aid diagnosis.
 - Repair a defect that caused crashes  at start up for some macOS Big
   Sur users.
 - Repair a defect that could cause  the jt9 slow mode decoder process
   to exit incorrectly with a failure status.
 - Updated CTY.DAT file.

-------------------------------------------------------------------
Mon Jan 25 18:52:28 UTC 2021 - Walter Fey <dl8fcl@darc.de>

- update to version 2.3.0-rc4
 - The wsprd command line tool  uses the current working directory for
   the data file directory if it is not specified.
 - Updates to the language translations of the WSJT-X user Interface.
 - Updated CTY.DAT file.

-------------------------------------------------------------------
Wed Jan  6 08:16:36 UTC 2021 - Walter Fey <dl8fcl@darc.de>

- update to version 2.3.0-rc3
 - FST4W:  Improve FST4W  decoder sensitivity  on fading  channels and
   decrease false  decode rate.
 - FT8: Fixed a crash triggered by double clicking on the waterfall to
   invoke a decode of a signal in the preceding T/R interval.
 - FST4W: Do not save .c2 files.
 - FST4W:  Correct a  bug that  could cause  incorrect operation  when
   using  negative noise  blanker (NB)  percentage to  trigger looping
   over a range of NB percentages.
 - fst4sim: Added simulation of Lorentzian fading spectrum, invoked by
   negative fspread values.
 - Color highlighting scheme window fixed in dark mode.
 - Reports sent by QSO partners to  other stations no longer logged in
   error.
 - UDP Status(1) message now includes the current Tx message.
 - Example diagnostic logging configuration files included.
 - Use system localization for date fields in Log QSO dialog.
 - Improvements to audio input and output buffer sizes.
 - wsprd: Fails gracefully if data directory does not exist.
 - wsjtx_app_version: new utility to print application version string.
 - Regression  causing  incorrect  working  frequency  selection  when
   changing modes repaired.
 - Regression with QSO initiation with "Best S&P" repaired.
 - Updated installation instructions for macOS covering M1 hardware.
 - Improved compatibility is Debian 9 required distribution packages.
 - Repair regression with missing time-stamps in the ALL.TXT journal.
 - Allow hamlib_settings.json to work  with PTT only configurations so
   that optional PTT sharing on RTS or DTR can be enabled.
 - Several improvements to main window sizing and layout.
 - Repair regression  with OpenSSL libraries being  required when LoTW
   highlighting is not enabled.
 - Repair a  defect that  caused 2  by 1  callsigns to  be incorrectly
   parsed as non-standard.
 - Several updates to international UI translations.

-------------------------------------------------------------------
Mon Nov 16 15:18:54 UTC 2020 - Walter Fey <dl8fcl@darc.de>

- update to version 2.3.0-rc2
- Dropped audio samples message box. Removed, warnings and errors for
  these are now sent to the WSJT-X system log.
- FST4W spots to  WSPRNet.org will be augmented such that the server
  can distinguish the  mode being spotted. Spots  to WSPRNet.org will
  no longer be restricted to WSPR sub-bands.
- A new  internal system  and data logging  facility used  to provide
  trace,  debug,   information,  warning,  error,  and   fatal  error
  messages. The verbosity and filtering of messages is user definable
  via a configuration file. Without  a configuration file a basic log
  is written with  information, warning and error  messages only. Log
  files are automatically rotated to limit disk usage.
- Due to  some users using  inappropriate multicast IP  addresses for
  their interoperating  severs the default  behaviour now is  to only
  send multicast  UDP datagrams  to the loop-back  network interface.
  Users who  require WSJT-X UDP  Message Protocol datagrams  to reach
  other  hosts will  now  have  to configure  WSJT-X  to  send on  an
  appropriate  network interface,  and  use  an appropriately  scoped
  multicast group address for their  server applications.  If you are
  not sure then  224.0.0.1 (or ff02::1 if IPv6 is  desired) is a safe
  choice.

-------------------------------------------------------------------
Mon Sep 28 14:56:14 UTC 2020 - Walter Fey <dl8fcl@darc.de>

- update to version 2.3.0-rc1
- New modes FST4 and FST4W targeting LF and MF bands.
- Improved noise baseline discovery for more reliable SNR estimates.
- On the waterfall and 2D spectrum a tool-tip shows the frequency
  offset under the mouse pointer.
- The *On Dx Echo* Doppler compensation method has been modified in
  response to feedback from Users. Basic functionality is unchanged.
  See the User Guide (Section 8.1) for more information.
- Improved user_hardware script or program initiation for WSPR
  band-hopping mode.
- Decoded  QSO  mode  message  display  narrowed  to  make  appended
  information easier to view without scrolling the window.
- Option to record the propagation mode in logged QSO records.
- ADIF v3.1.1 compliance.
- Option to connect to PSKReporter using TCP/IP for those with very
  poor Internet connections.
- Major rewrite of the PSKReporter interface to improve efficiency
  and reduce traffic levels.
- Removal of the Tab 2 generated messages.
- Accessibility improvements to the UI.
- Tweaked decode speed options for a better user experience with
  lower powered single-board computers like the Raspberry Pi.
- Updates to UI translations in Spanish, Italian, Catalan, Chinese,
  Hong Kong Chinese, Danish, and Japanese.
- Audio devices only enumerated when starting up and opening the
  "Settings->Audio" device lists.
- Option to select the default audio device removed to minimize the
  likelihood of system sounds being transmitted.
- Better handling of missing audio devices.
- Improved and enhanced meta-data saved to .WAV files.
- More reliable multi-instance support.
- Included CTY.DAT file moved to installation share directory.
- Fixed some edge-case message packing and unpacking defects and
  ambiguities.
- Fix a defect that allowed non-CQ messages to be replied to via theA
  UDP Message Protocol.
- Fix a long-standing defect with Tx start timing.
- Repair a defect with style sheets when switching configurations.
- Repair defects that made the astronomical data window an several
  main window controls unreadable when using the dark style sheet.
- Repair a regression with setting WSPR transmitted power levels.
- Repair a regression with newly created ADIF log file's header.
- Many other defects repaired.

-------------------------------------------------------------------
Mon Jun 22 15:50:43 UTC 2020 - Walter Fey <dl8fcl@darc.de>

- update to version 2.2.2
- bug fix release, mainly to incorporate the new RAC section PE into the
  FT8/FT4/MSK144 Contest Mode for Field Day. Stations intending to operate
  in Field Day (FD) are urged to upgrade to this release.
 - FT8 decoder speeded up in Normal and Fast modes.
 - Thanks to our user interface language translation contributors for
   many improvements to the translated strings.
 - The DX Grid field is now cleared automatically when the DX Call
   field is changed. Care should be taken to complete entry of a
   callsign before entering a grid square.

-------------------------------------------------------------------
Wed Jun 10 08:40:35 UTC 2020 - Walter Fey <dl8fcl@darc.de>

- disable CXX warnings for Tumbleweed

-------------------------------------------------------------------
Mon Jun  8 07:19:31 UTC 2020 - Walter Fey <dl8fcl@darc.de>

- update to version 2.2.1
- Repair a defect in 6 character gridsquare lookup from the CALL3.TXT
  database, and improve "Lookup" button processing.
- Repair a defect with selecting Wide Graph 2D spectrum types in
   translated UIs.
- Repair a regression that blocked the Highlight Callsign UDP request
  from highlighting terms including a '+' character.
- Repair a defect that caused hash code lookups of one's own call to
  fail after an extended period of inactivity, when operating with a
  non-standard callsign.
- Repair  a  regression  where   occasional  Highlight  Callsign  UDP
  requests with the 'Highlight last'  parameter as true highlighted a
  match in a prior period. This fix include a performance improvement
  when  processing any  Highlight  Callsign  request with  'Highlight
  last' as true.
- Include support for the Yaesu FT-920 when controlled by Ham Radio
  Deluxe. This change inadvertently missed the v2.2.0 GA release.
- Correct a documentation issue with the UDP Message Protocol
  Status(1) message Special Operations Mode enumeration values ("WW
  DIGI added", Fox, and Hound renumbered). Thanks to Sam, W2JDB, for
  raising this issue.
- Updated Catalan UI translation, tnx Xavi, EA3W.
- Italian UI translation, tnx Marco, PY1ZRJ.
- Updated Spanish UI translation, tnx Cedric, EA4AC.

-------------------------------------------------------------------
Tue Jun  2 20:42:40 UTC 2020 - Walter Fey <dl8fcl@darc.de>

- update to version 2.2.0
  * Significant improvements to the decoders for FT4, FT8, JT4, JT65 and WSPR.
  * New format for "EU VHF Contest" Tx2 and Tx3 messages
  * Keyboard shortcuts have been added
  * User Interface Translations have been enabled. Available for Catalan,
    Spanish, Japanese, Chinese, and Hong Kong Chinese.
  * Other minor enhancements and bug fixes
  * For detailed changelog see
    http://www.physics.princeton.edu/pulsar/K1JT/Release_Notes.txt
  * Patch wsjtx-HamlibTransceiver.diff removed. Fixed upstream.
  * Patch wsjtx-qt_helpers.hpp.diff removed. Fixed upstream.
-------------------------------------------------------------------
Fri Mar 20 09:56:03 UTC 2020 - Walter Fey <dl8fcl@darc.de>

- wsjtx-HamlibTransceiver.diff to fix changes in hamlib
  hamlib_rig.h.diff removed

-------------------------------------------------------------------
Sat Mar 14 21:20:51 UTC 2020 - Walter Fey <dl8fcl@darc.de>

- spec file improved

-------------------------------------------------------------------
Mon Jan 27 09:54:20 UTC 2020 - Walter Fey <dl8fcl@darc.de>

- wsjtx-qt_helpers.hpp.diff for Tumbleweed. Redefinition of
 'struct std::hash<QString>' is breaking the build.

-------------------------------------------------------------------
Sun Dec 15 13:16:41 UTC 2019 - Walter Fey <dl8fcl@darc.de>

- version patch renamed

-------------------------------------------------------------------
Thu Dec  5 16:19:53 UTC 2019 - Walter Fey <dl8fcl@darc.de>

- hamlib_rig.h.diff to fix latest changes in hamlib

-------------------------------------------------------------------
Tue Nov 26 19:19:09 UTC 2019 - Walter Fey <dl8fcl@darc.de>

- update to version 2.1.2
  Bug fix only release which fixes a major regression
  in the Hamlib package bundled with WSJT-X v2.1.1 which is
  not used for this package.

-------------------------------------------------------------------
Mon Nov 25 19:53:45 UTC 2019 - Walter Fey <dl8fcl@darc.de>

- update to version 2.1.1
 - Document rules for the UDP message protocol.
 - Fix bug that could cause display of a blank Settings window.
 - Fix message parsing to properly handle 4-character directed CQs
 - Fix a potential crash in the interface to Omni-Rig.
 - Improve handling of unexpected rig off line status changes from
   Omni-Rig.
 - Add an option to highlight unworked 2-character grid fields rather
   than 4-character grid squares.
 - Fix bug that caused unwanted disabling of "Enable Tx" in Fox mode.
 - Log duplicate contacts in FT8 DXpedition Fox mode.
 - Regenerate the GFSK Tx waveform if Tx audio frequency is changed.
 - Fix the behavior of double-clicking on a decoded message with first
   callsign displayed as an unresolved hash code <...>.
 - Fix a problem with determining "worked before" status after a band
   change.
 - Updates to the WSJT-X 2.1 User Guide.
 - Fix a production issue with the macOS tool chain that generated
   broken executables.

-------------------------------------------------------------------
Tue Oct 29 08:35:24 UTC 2019 - Walter Fey <dl8fcl@darc.de>

- Fix for Tumbleweed -   cmake macro is broken again.

-------------------------------------------------------------------
Fri Oct  4 08:37:58 UTC 2019 - Walter Fey <dl8fcl@darc.de>

- use the fixed cmake macro for Tumbleweed

-------------------------------------------------------------------
Tue Jul 16 17:03:14 UTC 2019 - Walter Fey <dl8fcl@darc.de>

- Fix for Tumbleweed build

-------------------------------------------------------------------
Mon Jul 15 19:28:54 UTC 2019 - Walter Fey <dl8fcl@darc.de>

- update to version 2.1.0
  * The FT4 protocol, designed for HF contesting
  * Improved FT8 waveform generation
  * Low-sidelobe option for waterfall and spectrum display
  * Improved UDP messaging for inter-program communication
  * Improved accessibility features
  * Minor enhancements and bug fixes

-------------------------------------------------------------------
Mon Jun  3 18:37:58 UTC 2019 - Walter Fey <dl8fcl@darc.de>

- update to version 2.1.0-rc7
  bugfix for segfault while reading wsjtx_log.adi during start
-------------------------------------------------------------------
Sun Jun  2 19:36:57 UTC 2019 - Walter Fey <dl8fcl@darc.de>

- update to version 2.1.0-rc6
  IMPORTANT CHANGES TO THE FT4 PROTOCOL *** NOT BACKWARD COMPATIBLE ***
  - T/R sequence length increased from 6.0 to 7.5 seconds
  - Symbol rate decreased from 23.4375 to 20.8333 baud
  - Signal bandwidth decreased from 90 Hz to 80 Hz
  OTHER FT4 IMPROVEMENTS
  - Allowable time offsets -1.0 < DT < +1.0 s
  - Tx4 message with RRR now allowed, except in contest messages
  - Audio frequency is now sent to PSK Reporter
  - Add a third decoding pass
  - Add ordered statistics decoding
  - Improved sensitivity: threshold S/N is now -17.5 dB
  - Improved S/N calculation
  - In FT4 mode, Shift+F11/F12 moves Tx freq by +/- 100 Hz
  OTHER IMPROVEMENTS
  - Improvements to accessibility
  - Updates to the User Guide (not yet complete, however)
  - New user option: "Calling CQ forces Call 1st"
  - N1MM Logger+ now uses the standard WSJT-X UDP messages
  - OK/Cancel buttons on Log QSO window maintain fixed positions
  - Put EU VHF contest serial numbers into the ADIF SRX and STX fields
  BUG FIXES
  - Fix generation of Tx5 message when one callsign is nonstandard
  - Fix a bug that prevented use on macOS
  - Fix a bug that caused mode switch from FT4 to FT8
  - Fix a bug that caused FT4 to do WSPR-style band hopping
  - Fix a bug that caused a Fortran bounds error

-------------------------------------------------------------------
Sun May 19 20:23:55 UTC 2019 - Walter Fey <dl8fcl@darc.de>

- Start with style fusion

-------------------------------------------------------------------
Tue Apr 30 20:13:59 UTC 2019 - Walter Fey <dl8fcl@darc.de>

- update to version 2.1.0-rc5
  rc1
 - FT4 mode, a new mode targeted at HF digital contesting
 - GMSK modulation for FT4 and FT8
 - New waterfall option to select between raw sensitivity or a
   filtered signal representation for best visualization of signal
   quality
  rc2
 - Better options for QSO flow by clicking Tx# buttons to transmit
 - A 64-bit package for Windows 64-bit systems
 - Improved FT4 sync detection speed
  rc3
 - change the new FT4 mode to a synchronous T/R period of 6 seconds
  rc4
 - New "Call Best" button for FT4 mode to select the best reply to a
   CQ call based on neediness.
 - Fixed UTC display on FT4 waterfall.
  rc5
 - minor changes

-------------------------------------------------------------------
Mon Feb 25 20:44:39 UTC 2019 - Walter Fey <dl8fcl@darc.de>

- update to version 2.0.1
 - Remove startup message about importance of upgrading to v2.0.
 - Relax ADIF log file parsing to allow garbage between records and
   records with no DX callsign
 - Fix bug that prevented retention of power and comments in
   Log QSO window
 - Updates to User Guide
 - MSK144 frequency defaults to 50.260 in IARU Regions 2 and 3
 - Remove hexadecimal RGB values from color-configuration panel
 - Fix a bounds error by not executing Fox-related code when not
   in Fox mode
 - Allow the logQSO dialog to modify "Exch Sent" or "Rcvd" when 
   operating in RTTY or NA VHF Contest mode, and to have any
   changes flow through to N1MM Logger.
 - Fix several problems in handling hashed callsigns
 - More rigorous quality checking of WSPR decodes from the OSD algorithm
 - Fix bug that prevented recevied signal reports from
   compound callsigns to be logged
 - Improved recognition of callsigns with /P or /R suffixes
 - Do not waste time trying AP decoding of nonstandard callsigns
 - Make OSD decoding work with WSPR "type 2" messages
 - Retain in Tx6 message field any CQ messages like
   "CQ xxxx K1ABC FN42", where xxxx is 1-4 letters or 1-3 digits
 - Optional key bindings for F1 through F5, especially for contest use
 - Include grid in Tx1 messages with hashed callsign, for example
   "<DF2018ARDF> K1ABC FN42"
 - Better formatting for the files ALL.TXT and ALL_WSPR.TXT
 - Correct a flaw in validating contest exchange data when logging
 - Option to always start new decode periods at top of Band
   Activity window
 - New command "Erase WSPR hashtable" on the File menu
 - Improved validation for ARRL RTTY RU and FD exchange fields
 - UDP Reference applications join a multicast group on all available
   multicast capable network interfaces
 - Minor code changes to support Qt versions >=5.10
 - Changes to support x64 Windows builds in preparation for Qt v5.12
 - Add "ADIF Export ..." to Fox Log's contextual popup menu
 - Use ARRL-required names for VHF+ bands in exported Cabrillo log
 - New utility program rigctlcom-wsjtx (from Hamlib)
 - Remove temporary FT8 working frequencies from default frequency list
 - UDP protocol's Clear (3) message is made two-way, for better
   communication with DX Lab Suite applications
 - Reset QSO start time when aborting a QSO or clearing messages by ESC
   or F4
 - Correct a logging issue in Fox's ADIF log when Fox sends RR73 to more
   than one Hound in the same Tx sequence.

-------------------------------------------------------------------
Wed Feb 13 23:43:37 UTC 2019 - dl8fcl@darc.de

- build requirements fixed

-------------------------------------------------------------------
Sun Dec 30 09:50:13 UTC 2018 - dl8fcl@darc.de

- patch to not build/install redundant binaries with hamlib
  found at fedorainfracloud.org from Richard Shaw(hobbes1069)

-------------------------------------------------------------------
Mon Dec 10 20:59:52 UTC 2018 - dl8fcl@darc.de

- update to version 2.0.0
  for the new features and enhancements
  check http://www.physics.princeton.edu/pulsar/K1JT/wsjtx.html
  Replace deprecated/removed cmake command patch removed

-------------------------------------------------------------------
Tue Nov 20 22:18:53 UTC 2018 - dl8fcl@darc.de

- a tag added, to show on pskreporter who is using this version

-------------------------------------------------------------------
Mon Jun 18 14:07:07 UTC 2018 - dl8fcl@darc.de

- fix for Tumbleweed. Replace deprecated/removed cmake command

-------------------------------------------------------------------
Wed May 30 06:23:36 UTC 2018 - dl8fcl@darc.de

- update to version 1.9.1
  bugfix release

-------------------------------------------------------------------
Sun May 27 07:17:27 UTC 2018 - dl8fcl@darc.de

- update to version 1.9.0
  New FT8 DXpedition Mode to facilitate high QSO rates in pileup
  situations
  A lot of other improvements and bug fixes

-------------------------------------------------------------------
Sat Oct 28 23:39:10 UTC 2017 - dl8fcl@darc.de

- update to version 1.8.0

-------------------------------------------------------------------
Mon Dec 19 22:39:35 UTC 2016 - dl8fcl@t-online.de

- update to the latest 1.7.1 svn version

-------------------------------------------------------------------
Mon Nov 23 19:35:22 UTC 2015 - dl8fcl@t-online.de

- update to the latest 1.7.0 svn version

-------------------------------------------------------------------
Mon Jul  6 05:24:01 UTC 2015 - dl8fcl@darc.de

- update to the latest 1.6.1 svn version

-------------------------------------------------------------------
Sat Nov  8 11:14:12 UTC 2014 - dl8fcl@darc.de

- import into buildservice

Places

File wsjtx.changes of Package wsjtx (Revision 33358cd0e8c332965b97ce524cbc9d75)

Places