File autoyast-sles11ga_full.xml of Package xenpaging-scripts

Overview Repositories Revisions Requests Users Attributes Meta

File autoyast-sles11ga_full.xml of Package xenpaging-scripts

<?xml version="1.0"?>
<!DOCTYPE profile>
<profile xmlns="http://www.suse.com/1.0/yast2ns" xmlns:config="http://www.suse.com/1.0/configns">
  <add-on>
    <add_on_products config:type="list"/>
  </add-on>
  <bootloader>
    <device_map config:type="list">
      <device_map_entry>
        <firmware>hd0</firmware>
        <linux>/dev/hda</linux>
      </device_map_entry>
      <device_map_entry>
        <firmware>hd1</firmware>
        <linux>/dev/hdb</linux>
      </device_map_entry>
    </device_map>
    <global>
      <activate>true</activate>
      <generic_mbr>true</generic_mbr>
      <timeout config:type="integer">8</timeout>
    </global>
    <loader_type>grub</loader_type>
  </bootloader>
  <deploy_image>
    <image_installation config:type="boolean">false</image_installation>
  </deploy_image>
  <firewall>
    <FW_ALLOW_FW_BROADCAST_DMZ>no</FW_ALLOW_FW_BROADCAST_DMZ>
    <FW_ALLOW_FW_BROADCAST_EXT>no</FW_ALLOW_FW_BROADCAST_EXT>
    <FW_ALLOW_FW_BROADCAST_INT>no</FW_ALLOW_FW_BROADCAST_INT>
    <FW_CONFIGURATIONS_DMZ></FW_CONFIGURATIONS_DMZ>
    <FW_CONFIGURATIONS_EXT>sshd xorg-x11-server ypbind</FW_CONFIGURATIONS_EXT>
    <FW_CONFIGURATIONS_INT></FW_CONFIGURATIONS_INT>
    <FW_DEV_DMZ></FW_DEV_DMZ>
    <FW_DEV_EXT>eth0</FW_DEV_EXT>
    <FW_DEV_INT></FW_DEV_INT>
    <FW_FORWARD_ALWAYS_INOUT_DEV></FW_FORWARD_ALWAYS_INOUT_DEV>
    <FW_FORWARD_MASQ></FW_FORWARD_MASQ>
    <FW_IGNORE_FW_BROADCAST_DMZ>no</FW_IGNORE_FW_BROADCAST_DMZ>
    <FW_IGNORE_FW_BROADCAST_EXT>yes</FW_IGNORE_FW_BROADCAST_EXT>
    <FW_IGNORE_FW_BROADCAST_INT>no</FW_IGNORE_FW_BROADCAST_INT>
    <FW_IPSEC_TRUST>no</FW_IPSEC_TRUST>
    <FW_LOAD_MODULES>nf_conntrack_netbios_ns</FW_LOAD_MODULES>
    <FW_LOG_ACCEPT_ALL>no</FW_LOG_ACCEPT_ALL>
    <FW_LOG_ACCEPT_CRIT>yes</FW_LOG_ACCEPT_CRIT>
    <FW_LOG_DROP_ALL>no</FW_LOG_DROP_ALL>
    <FW_LOG_DROP_CRIT>yes</FW_LOG_DROP_CRIT>
    <FW_MASQUERADE>no</FW_MASQUERADE>
    <FW_PROTECT_FROM_INT>no</FW_PROTECT_FROM_INT>
    <FW_ROUTE>no</FW_ROUTE>
    <FW_SERVICES_ACCEPT_DMZ></FW_SERVICES_ACCEPT_DMZ>
    <FW_SERVICES_ACCEPT_EXT></FW_SERVICES_ACCEPT_EXT>
    <FW_SERVICES_ACCEPT_INT></FW_SERVICES_ACCEPT_INT>
    <FW_SERVICES_ACCEPT_RELATED_DMZ></FW_SERVICES_ACCEPT_RELATED_DMZ>
    <FW_SERVICES_ACCEPT_RELATED_EXT></FW_SERVICES_ACCEPT_RELATED_EXT>
    <FW_SERVICES_ACCEPT_RELATED_INT></FW_SERVICES_ACCEPT_RELATED_INT>
    <FW_SERVICES_DMZ_IP></FW_SERVICES_DMZ_IP>
    <FW_SERVICES_DMZ_RPC></FW_SERVICES_DMZ_RPC>
    <FW_SERVICES_DMZ_TCP></FW_SERVICES_DMZ_TCP>
    <FW_SERVICES_DMZ_UDP></FW_SERVICES_DMZ_UDP>
    <FW_SERVICES_EXT_IP></FW_SERVICES_EXT_IP>
    <FW_SERVICES_EXT_RPC></FW_SERVICES_EXT_RPC>
    <FW_SERVICES_EXT_TCP></FW_SERVICES_EXT_TCP>
    <FW_SERVICES_EXT_UDP></FW_SERVICES_EXT_UDP>
    <FW_SERVICES_INT_IP></FW_SERVICES_INT_IP>
    <FW_SERVICES_INT_RPC></FW_SERVICES_INT_RPC>
    <FW_SERVICES_INT_TCP></FW_SERVICES_INT_TCP>
    <FW_SERVICES_INT_UDP></FW_SERVICES_INT_UDP>
    <enable_firewall config:type="boolean">false</enable_firewall>
    <start_firewall config:type="boolean">false</start_firewall>
  </firewall>
  <general>
    <ask-list config:type="list"/>
    <mode>
      <confirm config:type="boolean">false</confirm>
    </mode>
    <mouse>
      <id>none</id>
    </mouse>
    <proposals config:type="list"/>
    <signature-handling>
      <accept_file_without_checksum config:type="boolean">true</accept_file_without_checksum>
      <accept_non_trusted_gpg_key config:type="boolean">true</accept_non_trusted_gpg_key>
      <accept_unknown_gpg_key config:type="boolean">true</accept_unknown_gpg_key>
      <accept_unsigned_file config:type="boolean">true</accept_unsigned_file>
      <accept_verification_failed config:type="boolean">false</accept_verification_failed>
      <import_gpg_key config:type="boolean">true</import_gpg_key>
    </signature-handling>
  </general>
  <keyboard>
    <keymap>english-us</keymap>
  </keyboard>
  <language>
    <language>en_US</language>
    <languages></languages>
  </language>
  <ldap>
    <base_config_dn></base_config_dn>
    <bind_dn></bind_dn>
    <create_ldap config:type="boolean">false</create_ldap>
    <file_server config:type="boolean">false</file_server>
    <ldap_domain>dc=example,dc=com</ldap_domain>
    <ldap_server>127.0.0.1</ldap_server>
    <ldap_tls config:type="boolean">true</ldap_tls>
    <ldap_v2 config:type="boolean">false</ldap_v2>
    <login_enabled config:type="boolean">true</login_enabled>
    <member_attribute>member</member_attribute>
    <pam_password>exop</pam_password>
    <start_autofs config:type="boolean">true</start_autofs>
    <start_ldap config:type="boolean">false</start_ldap>
  </ldap>
  <login_settings/>
  <networking>
    <dhcp_options>
      <dhclient_client_id></dhclient_client_id>
      <dhclient_hostname_option>AUTO</dhclient_hostname_option>
    </dhcp_options>
    <dns>
      <dhcp_hostname config:type="boolean">true</dhcp_hostname>
      <domain>site</domain>
      <hostname>sles11ga-full</hostname>
      <resolv_conf_policy>auto</resolv_conf_policy>
    </dns>
    <interfaces config:type="list">
      <interface>
        <bootproto>dhcp4</bootproto>
        <device>eth0</device>
        <startmode>auto</startmode>
      </interface>
    </interfaces>
    <managed config:type="boolean">false</managed>
    <routing>
      <ip_forward config:type="boolean">false</ip_forward>
    </routing>
  </networking>
  <nis>
    <netconfig_policy>auto</netconfig_policy>
    <nis_broadcast config:type="boolean">false</nis_broadcast>
    <nis_broken_server config:type="boolean">false</nis_broken_server>
    <nis_domain>suse.de</nis_domain>
    <nis_local_only config:type="boolean">false</nis_local_only>
    <nis_options></nis_options>
    <nis_other_domains config:type="list"/>
    <nis_servers config:type="list"/>
    <slp_domain/>
    <start_autofs config:type="boolean">true</start_autofs>
    <start_nis config:type="boolean">true</start_nis>
  </nis>
  <ntp-client>
    <configure_dhcp config:type="boolean">true</configure_dhcp>
    <peers config:type="list">
      <peer>
        <address>pool.ntp.org</address>
        <initial_sync config:type="boolean">true</initial_sync>
        <options></options>
        <type>server</type>
      </peer>
    </peers>
    <start_at_boot config:type="boolean">true</start_at_boot>
    <start_in_chroot config:type="boolean">true</start_in_chroot>
  </ntp-client>
  <partitioning config:type="list">
    <drive>
      <device>/dev/hda</device>
      <initialize config:type="boolean">true</initialize>
      <partitions config:type="list">
        <partition>
          <create config:type="boolean">true</create>
          <crypt_fs config:type="boolean">false</crypt_fs>
          <filesystem config:type="symbol">swap</filesystem>
          <format config:type="boolean">true</format>
          <loop_fs config:type="boolean">false</loop_fs>
          <mount>swap</mount>
          <mountby config:type="symbol">label</mountby>
	  <label>swap</label>
          <partition_id config:type="integer">130</partition_id>
          <partition_nr config:type="integer">1</partition_nr>
          <resize config:type="boolean">false</resize>
          <size>509935104</size>
        </partition>
        <partition>
          <create config:type="boolean">true</create>
          <crypt_fs config:type="boolean">false</crypt_fs>
          <filesystem config:type="symbol">ext3</filesystem>
          <format config:type="boolean">true</format>
          <fstopt>noatime,noacl</fstopt>
          <loop_fs config:type="boolean">false</loop_fs>
          <mount>/</mount>
          <mountby config:type="symbol">label</mountby>
	  <label>sles11ga_full</label>
          <partition_id config:type="integer">131</partition_id>
          <partition_nr config:type="integer">2</partition_nr>
          <resize config:type="boolean">false</resize>
          <size>3767177728</size>
        </partition>
      </partitions>
      <pesize></pesize>
      <type config:type="symbol">CT_DISK</type>
      <use>all</use>
    </drive>
  </partitioning>
  <proxy>
    <enabled config:type="boolean">false</enabled>
    <ftp_proxy></ftp_proxy>
    <http_proxy></http_proxy>
    <https_proxy></https_proxy>
    <no_proxy>localhost, 127.0.0.1</no_proxy>
    <proxy_password></proxy_password>
    <proxy_user></proxy_user>
  </proxy>
  <report>
    <errors>
      <log config:type="boolean">true</log>
      <show config:type="boolean">true</show>
      <timeout config:type="integer">0</timeout>
    </errors>
    <messages>
      <log config:type="boolean">true</log>
      <show config:type="boolean">true</show>
      <timeout config:type="integer">0</timeout>
    </messages>
    <warnings>
      <log config:type="boolean">true</log>
      <show config:type="boolean">true</show>
      <timeout config:type="integer">0</timeout>
    </warnings>
    <yesno_messages>
      <log config:type="boolean">true</log>
      <show config:type="boolean">true</show>
      <timeout config:type="integer">0</timeout>
    </yesno_messages>
  </report>
  <runlevel>
    <default>5</default>
  </runlevel>
  <software>
    <packages config:type="list">
    </packages>
    <patterns config:type="list">
      <pattern>Minimal</pattern>
      <pattern>WBEM</pattern>
      <pattern>apparmor</pattern>
      <pattern>base</pattern>
      <pattern>documentation</pattern>
      <pattern>gnome</pattern>
      <pattern>print_server</pattern>
      <pattern>x11</pattern>
    </patterns>
    <remove-packages config:type="list">
      <package>gnome-session-branding-upstream</package>
      <package>libqt4-sql-sqlite</package>
      <package>lprng</package>
      <package>pcmciautils</package>
      <package>portmap</package>
      <package>rsyslog</package>
      <package>sendmail</package>
      <package>susehelp_de</package>
      <package>xpdf-tools</package>
      <package>yast2-control-center-qt</package>
      <package>bootsplash</package>
      <package>bootsplash-branding-SLES</package>
      <package>gfxboot</package>
      <package>gfxboot-branding-SLES</package>
      <package>mtools</package>
    </remove-packages>
  </software>
  <timezone>
    <hwclock>UTC</hwclock>
    <timezone>Europe/Berlin</timezone>
  </timezone>
  <user_defaults>
    <expire></expire>
    <group>100</group>
    <groups>video,dialout</groups>
    <home>/home</home>
    <inactive>-1</inactive>
    <shell>/bin/bash</shell>
    <skel>/etc/skel</skel>
  </user_defaults>
  <users config:type="list">
    <user>
      <encrypted config:type="boolean">true</encrypted>
      <fullname>root</fullname>
      <gid>0</gid>
      <home>/root</home>
      <password_settings>
        <expire></expire>
        <flag></flag>
        <inact></inact>
        <max></max>
        <min></min>
        <warn></warn>
      </password_settings>
      <shell>/bin/bash</shell>
      <uid>0</uid>
      <user_password>$2a$05$JsXiCbRrPIB.CYv5qtKhB.bIZteE1kyAjhebvqZCE5c1nATkuzJtC</user_password>
      <username>root</username>
    </user>
  </users>
  <x11>
    <display_manager>gdm</display_manager>
    <enable_3d config:type="boolean">false</enable_3d>
    <monitor>
      <display>
        <max_hsync config:type="integer">40</max_hsync>
        <max_vsync config:type="integer">75</max_vsync>
        <min_hsync config:type="integer">30</min_hsync>
        <min_vsync config:type="integer">50</min_vsync>
      </display>
      <monitor_device>Unknown</monitor_device>
      <monitor_vendor>Unknown</monitor_vendor>
    </monitor>
    <resolution>800x600</resolution>
    <window_manager>gnome</window_manager>
  </x11>
</profile>

Places

File autoyast-sles11ga_full.xml of Package xenpaging-scripts

Places