openSUSE Build Service

Overview Repositories Revisions Requests Users Attributes Meta

File nsd.changes of Package nsd

-------------------------------------------------------------------
Thu Nov 10 18:23:54 UTC 2022 - Michael Ströder <michael@stroeder.com>

- New upstream release 4.6.1

FEATURES:
- Set ALPN "dot" token during connection establishment as per RFC9103
   section 7.1 (Thanks Cesar Kuroiwa).
- Add SVCB dohpath support
BUG FIXES:
- Fix static analyzer reports, fix wrong log print when skipping xfr,
   fix to print error on pipe read fail, and assert an xfr is in
   progress during packet checks.
- Use AC_PROG_CC_STDC with autoconf versions prior to 2.70.
- Add missing documentation for zone verification.
- Fix #212: Change commandline control actions to always log.
- Merge #231 from moritzbuhl: Fix checking if nonblocking sockets work
   on OpenBSD.
- Change zone parsing to accept non-trailing newline.

-------------------------------------------------------------------
Fri Jul  1 08:08:06 UTC 2022 - Michael Ströder <michael@stroeder.com>

- New upstream release 4.6.0

FEATURES:
- Port zone-verification from CreDNS to NSD4.
BUG FIXES:
- Fix static analyzer reports on ixfrcreate temp file.
- Fixup wrong ixfrcreate fread return check.

-------------------------------------------------------------------
Sat May 14 23:58:59 UTC 2022 - Michael Ströder <michael@stroeder.com>

- New upstream release 4.5.0

FEATURES:
- Merge PR #209: IXFR out
  This adds IXFR out functionality to NSD. NSD can copy IXFRs from
  upstream to downstream clients, or create IXFRs from zonefiles.
  The options store-ixfr: yes and create-ixfr: yes can be used to
  turn this on. Default is turned off. The options ixfr-number and
  ixfr-size can be used to tune the number of IXFR transfers and
  total data size stored. This is configured per zone, the IXFRs
  are served to the hosts that are allowed to perform zone transfers.
  And if TSIG is configured, signed with the same key. The content
  is stored to file if a zonefile is configured for the zone, in
  the zonefile.ixfr and zonefile.ixfr.2, .. files. They contain
  readable text format. The number of IXFRs is num.rixfr in
  statistics output, also per zone if per zone statistics are enabled.
  If offline, nsd-checkzone -i can create ixfr files.
  NSD already supports requesting IXFRs, this addition allows NSD
  to serve IXFR transfers to clients.
  NSD stops responding with NOTIMPL to IXFR requests, also for zones
  that do not have IXFR enabled. The clients gets a full zone reply
  or a status reply if the serial is up to date.
BUG FIXES:
- Fix code analyzer zero divide warning.
- Fix code analyzer large value with assertion.
- Fix another code analyzer zero divide warning.
- Fix code analyzer warning about uninitialized temp storage in loop.
- Fix spelling error in comment in svcbparam_lookup_key.
- Update cirrus script FreeBSD version.

-------------------------------------------------------------------
Thu Feb 17 19:01:39 UTC 2022 - Michael Ströder <michael@stroeder.com>

- New upstream release 4.4.0

FEATURES:
- Merge #193: Lower memory usage of the XFRD process by default.
  Instead of preallocating all elements, they are allocated when used.
  There are options for managing the memory usage, defaults are the
  same as before. xfrd-tcp-max sets the number of sockets for tcp
  connections that xfrd can make to download zone contents. And
  xfrd-tcp-pipeline the number of simultaneous transfers over the
  same connection.

BUG FIXES:
- Fix #200: nsd-checkzone succeeds even with incorrect serial in SOA
  record.
- Merge #204 from jonathangray: correct some spelling mistakes.
- Fix to change file mode before changing file owner for the
  nsd-control unix socket file.
- Fix to document nsd-checkzone -p in the man page for nsd-checkzone.
- Fix #206: build with --without-ssl fails.
- Merge #207 Sync nsd-control-setup with unbound-control-setup to
  generate certificates with SANs.
- Fix unit tests for nds-control-setup exit code and the
  xfrd-tcp-max default.

-------------------------------------------------------------------
Thu Dec  9 18:23:11 UTC 2021 - Michael Ströder <michael@stroeder.com>

- New upstream release 4.3.9
  * Fix #198: nsd-control reconfig core dump.
  * Fix to remove git tracking and ci information from release tarballs.
  * Fix unit tests for new answer-cookie default.
  * Fix socket_partitioning unit test for FreeBSD.
  * Fix SVCB test to work around older dig with drill.

-------------------------------------------------------------------
Sat Nov 13 18:17:30 UTC 2021 - Michael Ströder <michael@stroeder.com>

- adjusted SystemCallFilter= in nsd.service

-------------------------------------------------------------------
Wed Oct 13 12:45:45 UTC 2021 - Michael Ströder <michael@stroeder.com>

- set RestrictAddressFamilies= in nsd.service

-------------------------------------------------------------------
Tue Oct 12 20:19:52 UTC 2021 - Michael Ströder <michael@stroeder.com>

- reworked nsd.service:
  * directly start as User=_nsd
  * even more hardening
  * removed commented and unused directives

-------------------------------------------------------------------
Tue Oct 12 20:01:24 UTC 2021 - Johannes Segitz <jsegitz@suse.com>

- Added hardening to systemd service(s) (bsc#1181400). Modified:
  * nsd.service

-------------------------------------------------------------------
Tue Oct 12 18:24:24 UTC 2021 - Michael Ströder <michael@stroeder.com>

- New upstream release 4.3.8

FEATURES:
- Merge #185 by cesarkuroiwa: Mutual TLS.
- Set default for answer-cookie to no. Because in server deployments
  with mixed server software, a default of yes causes issues.

BUG FIXES:
- Fix to compile with OpenSSL 3.0.0beta2.
- Fix configure detection of SSL_CTX_set_security_level.
- Fix deprecated functions use from openssl 3.0.0beta2.
- For #184: Note that all zones can be targeted by some nsd-control
  commands in the man page.
- Fixes for #185: Document client-cert, client-key and client-key-pw
  in the man page. Fix yacc semicolon. Fix unused variable warning.
  Use strlcpy instead of strncpy. Fix spelling error in error
  printout.
- Merge #187: Support using system-wide crypto policies.
- Fix #188: NSD fails to build against openssl 1.1 on CentOS 7.
- Fix sed script in ssldir split handling.
- Fix #189: nsd 4.3.7 crash answer_delegation: Assertion
  `query->delegation_rrset' failed.
- Fix #190: NSD returns 3 NSEC3 records for NODATA response.
- Fix compile failure with openssl 1.0.2.
- Fix #194: Incorrect NSEC3 response for SOA query below delegation
  point.

-------------------------------------------------------------------
Thu Jul 22 18:21:09 UTC 2021 - Michael Ströder <michael@stroeder.com>

- New upstream release 4.3.7

FEATURES:
- Syntax of SVCB and HTTPS RR type as per draft-ietf-dnsop-svcb-https
- Client side DNS Zone Transfer-over-TLS (XoT) support as per
  draft-ietf-dprive-xfr-over-tls
- Interoperable DNS Cookies support as per RFC7873 and RFC9018

BUG FIXES:
- Fix for #170: Fix build warnings when IPv6 is disabled.
- Fix #170: Disabled IPv6 and DNSTAP enabled triggers a build error.
- Fix for #128: Skip over sendmmsg invalid argument when port is zero.
- Fix #171: Invalid negative response (NSEC3) after IXFR.
- Fix to make nsec3_chain_find_prev return NULL if one nsec3 left.
- Fix #174: NS Records below delegation are not ignored (nsd-checkzone
  also does not raise any issue).
- Fix #176: please review Loglevel on missing zonefile.
- Update the ACX_CHECK_NONBLOCKING_BROKEN test for the configure
  script.
- Fix #179: log notice and server-count.
- Update configure nonblocking test to use host.
- Fix #168: Buffer overflow in the dname_to_string() function
- Fixes for child server processes getting out of sync with the
  dnstap-collector process
- Fix gcc-11 warning on array bounds.
- Fix compile of cookies on FreeBSD without IPv6.
- Fix for loop initial declaration for nonc99 compiler
- Fix typo in xfrd-tcp.c.

-------------------------------------------------------------------
Tue Apr  6 18:32:52 UTC 2021 - Michael Ströder <michael@stroeder.com>

- New upstream release 4.3.6

FEATURES:
- Fix #146 with #147: DNSTAP log the local address of the server
  with the dnstap logs.
- Enable configuring a control-interface by interface name.
- A -p option to nsd-checkzone to print a successfully read zone.
- Add Extended DNS Errors RFC8914
- Per zone Access Control List for queries
  with an allow-query: option.

BUG FIXES:
- Prevent a few more yacc clashes.
- Merge PR #153 from fobser: Repair -fno-common linker errors
  automatically.
- Fix uninitialized access of log_buf in error printout on apply ixfr.
- Fix AF_LOCAL compile error for Solaris.
- Fix ifaddrs compile error for Solaris.
- Fix ifaddrs.h compile error for Solaris.
- Man page documentation for dnstap options.
- Fix segfault on high verbosity for TLS channels with dnstap log
  local address.
- Fix #163: A TSIG noncompliance with RFC 2845.
- Fix that wildcard is printed as a star instead of escaped, in
  logs and in written zone files.
- Fix double config.h include in configlexer.c
- Fix to remove configyyrename from makedist.sh and also
  update the flex and bison rules there to add the "c_" prefix.
- Fix configure to use header checks with compile.
- Fix warning about unused function log_addr.
- Fix #154: TXT with parentheses fails in 4.3.5.
- Align parsing of TXT elements with how bind does it.
- Fix configure failure for enable systemd because of autoconf.

-------------------------------------------------------------------
Tue Jan 26 19:08:44 UTC 2021 - Michael Ströder <michael@stroeder.com>

- New upstream release 4.3.5

BUG FIXES:
- Fix #143: xfrd no hysteresis with NOT IMPLEMENTED rcode.
- Fix #144: Typo fix in nsd.conf.5.in.
- For #145: Fix that service of remaining TCP and TLS connections
  does not allow new queries to be made, the connection is closed.
  Only existing queries and zone transfers are answered, new ones
  are rejected by a close of the channel.
- Fix that nsd-control has timeout when connection is down.
- remove windows socket ifdefs from nsd-control.
- Fix #148: CNAME need not be followed after a synthesized CNAME
  for a CNAME query.
- Fix configure.ac for autoconf 2.70.
- Fix #150: TXT record validation difference with BIND.
- Fix #151: DNAME not applied more than once to resolve the query.
- Fix #152: '*' in Rdata causes the return code to be NOERROR instead
  of NX.

-------------------------------------------------------------------
Tue Dec  1 18:26:51 UTC 2020 - Michael Ströder <michael@stroeder.com>

- New upstream release 4.3.4

FEATURES:
- Merge PR #141: ZONEMD RR type.

BUG FIXES:
- Fix that symlink does not interfere with chown of pidfile
  (bsc#1179191, CVE-2020-28935)
- Fix #129: ambiguous use of errno, in log message if sendmmsg fails.
- Fix #128: Fix that the invalid port number is logged for sendmmsg
  failed: Invalid argument.
- Fix #127: two minor `-Wcast-qual` cleanups
- Fix #126: minor header hygiene
- Fix #125: include config.h in compat/setproctitle.c and fix
  prototype of `setproctitle`
- Fix #133: fix 0-init of local ( stack ) buffer.
- Fix missing parenthesis on size of fix to init buffer.
- Fix #134: IPV4_MINIMAL_RESPONSE_SIZE vs EDNS_MAX_MESSAGE_LEN.
- Fix to add missing closest encloser NSEC3 for wildcard nodata type
  DS answer.
- Remove unused init_cfg_parse routine from configlexer.
- Fix #138: NSD returns non-EDNS answer when QUESTION is empty.
- Fix #142: NODATA answers missin SOA in authority section after
  CNAME chain.

-------------------------------------------------------------------
Thu Oct  8 19:28:21 UTC 2020 - Michael Ströder <michael@stroeder.com>

- New upstream release 4.3.3

FEATURES:
- Follow DNS flag day 2020 advice and
  set default EDNS message size to 1232.
- Merged PR #113 with fixes.  Instead of listing an IP-address to
  listen on, an interface name can be specified in nsd.conf, with
  ip-address: eth0.  The IP-addresses for that interface are then used.
- Port TSIG code for openssl 3.0.0-alpha6.

BUG FIXES:
- Fix make install with --with-pidfile="".
- Merge #115 from millert: Fix strlcpy() usage. From OpenBSD.
- Merge #117: mini_event.h (4.3.2 and 4.3.1) on OpenBSD cannot find
  fd_set - patch.
- Fix that configure checks for EVP_sha256 to detect openssl, because
  HMAC_CTX_new is deprecated in 3.0.0.
- Fix #119: fix compile warnings from new gcc.
- Fix #119: warn when trying to parse a directory.
- Merge PR #121: Increase log level of recreated database from
  WARNING to ERR.
- Remove unused space from LIBS on link line.
- Updated date in nsd -v output.

-------------------------------------------------------------------
Tue Jul 14 19:02:21 UTC 2020 - Michael Ströder <michael@stroeder.com>

- New upstream release 4.3.2

FEATURES:
- Fix #96: log-only-syslog: yes sets to only use syslog, fixes
  that the default configuration and systemd results in duplicate
  log messages.
- Fix #107: nsd -v shows configure line, openssl version and libevent
  version.
- Fix #103 with #110: min-expire-time option.  To provide a lower
  bound for expire period.  Expressed in number of seconds or
  refresh+retry+1.

BUG FIXES:
- Fix for posix shell syntax for trap in nsd-control-setup
- Fix to omit the listen-on lines from log at startup, unless verbose.
- Fix uninitialised values for bindtodevice option at startup with
  reuseport and multiple interfaces.
- Fix #95: Removed make test check because tpkg not included in
  release tarballs.
- Fix unused parameter compile warnings.
- Fix #97: EDNS unknown version: query not in response.
- Fix #99: Fix copying of socket properties with reuseport enabled.
- Document default value for tcp-timeout.
- Merge PR#102 from and0x000: add missing default in documentation
  for drop-updates.
- Fix unlink of pidfile warning if not possible due to permissions,
  nsd can display the message at high verbosity levels.
- Removed contrib/nsd.service, example is too complicated and not
  useful.
- Do not log EAGAIN errors for sendmmsg, to stop log spam on OpenBSD.
- Merge #108 from Nomis: Make the max-retry-time description clearer.
- Retry when udp send buffer is full to wait until buffer space is
  available.
- Remove errno reset behaviour from sendmmsg and recvmmsg
  replacement functions.
- Fix unit test for different nsd-control-setup -h exit code.
- Merge #112 from jaredmauch: log old and new serials when NSD
  rejects an IXFR due to an old serial number.
- Fix #106: Adhere better to xfrd bounds.  Refresh and retry times.
- Fix #105: Clearing hash_tree means just emptying the tree.

-------------------------------------------------------------------
Thu Apr 16 19:04:58 UTC 2020 - Michael Ströder <michael@stroeder.com>

- New upstream release 4.3.1

BUG FIXES:
- Fix #70: error: 'fd_set' undeclared.
- Fix #71: error: 'for' loop initial declaration used outside C99
  mode.
- Fix to move declarations out of for loops in event test too.
- Fix #76: cpuid typedef for Hurd, DragonflyBSD compile.
- Fix #75: configure test for sched_setaffinity, and use
  cpuset_setaffinity otherwise.  Also test for presence of sysconf.
- Fix #74: GNU Hurd fix cast from pointer to integer of different size.
- Fix for #74, #75: cpuset test for header contents and provide code.
- Fix #78: Fix SO_SETFIB error on FreeBSD.
- Merge PR #83 from noloader: Fix GNU HURD sched_setaffinity compile.
- Fix #80: NetBSD and implicit declaration of reallocarray.
- Fix unknown u_long in util.c for Issue #80 .
- Merge PR #86 from noloader: Use precious variables for GREP, EGREP,
  SED, AWK, LEX and YACC.
- For PR #86: Fix that programs loaded after CFLAGS and stuff is
  set, specifically the compiler, so that it can work if it needs
  special flags from that.  Fix that lex only needs to support -i
  if actually defined, otherwise the output included in the source
  tarball can be used.
- Merge PR #90 by phicoh: O_CLOEXEC should be FD_CLOEXEC.
- Merge PR #92 by tonysgi: Fix typo.
- Merge PR #91 by gearnode: nsd-control-setup recreate certificates.
  The '-r' option recreates certificates.  Without it it creates them
  if they do not exist, and does not modify them otherwise.

-------------------------------------------------------------------
Tue Mar 17 20:52:34 UTC 2020 - Michael Ströder <michael@stroeder.com>

- New upstream release 4.3.0

FEATURES:
- Fix to use getrandom() for randomness, if available.
- Fix #56: Drop sparse TSIG signing support in NSD.
  Sign every axfr packet with TSIG, according to the latest
  draft-ietf-dnsop-rfc2845bis-06, Section 5.3.1.
- Merge pull request #59 from buddyns: add FreeBSD support
  for conf key ip-transparent.
- Add feature to pin server processes to specific cpus.
- Add feature to pin IP addresses to selected server processes.
- Set process title to identify individual processes.
- Merge PR#22: minimise-any: prefer polular and not large RRset,
  from Daisuke Higashi.
- Add support for SO_BINDTODEVICE on Linux.
- Add support for SO_SETFIB on FreeBSD.
- Add feature to drop queries with opcode UPDATE.

BUG FIXES:
- Fix fname null check of fname in namedb_read_zonefile.
- Fix implicit cast of size in udb_radnode_array_grow.
- Fix ignore of return value of ssl_printf in remote.c.
- Fix unused check of fd in parent_handle_reload_command.
- Attempt to fix signedness of nscount lookup in ixfr query_process.
- Fix identical branches for ssl_print of errors in remote.c.
- Fix type cast bounds, signedness of opt_rdlen in edns_parse_record.
- Fix to separate header and data lines in parse_zone_list_file.
- Fix to define max number of EDNS records we are willing to
  spend time on.
- Fix size of string len and capacity type cast in udbradtree.
- Fix to protect rrcount in tsig_find_rr from overflow.
- Annotate radix_find_prefix_node not reachable trail code.
- Fix to protect rrcount in packet_find_notify_serial from overflow.
- Fix to close socket on error in create_tcp_accept_sock.
- Fix to log on failure to chmod for socket for remote control.
- Fix to remove unneeded if in open of socket for remote control.
- Fix to restore input parameter on call failure in create_dirs.
- Please checker by terminating and initialising string read
  by remote control.
- Fix to define upper bounds on rr counts read from untrusted packet
  data.
- Separate acl_addr_match_range functions for ip4 and ip6, to
  please checkers.
- Avoid unused variable warning in new match_range_v4 function.
- Fix whitespace in nsd.conf.sample.in, patch from Paul Wouters.
- use-systemd is ignored in nsd.conf, when NSD is compiled with
  libsystemd it always signals readiness, if possible.
- Note that use-systemd is not necessary and ignored in man page.
- Fix unreachable code in ssl set options code.
- Fix bad shift in assertion code analyzer complaint.
- Fix responses for IXFR so that the authority section is not echoed
  in the response.
- Merge PR#60: Minor portability fixes from michaelforney, with
  avoid pointer arithmetic on void* and avoid unnecessary VLA.
- Fix that the retry wait does not exceed one day for zone transfers.

CHANGES:
- Set FD_CLOEXEC on opened sockets.

-------------------------------------------------------------------
Thu Dec 12 15:50:13 UTC 2019 - Adam Majer <adam.majer@suse.de>

- Update keyring as per https://nlnetlabs.nl/people/

-------------------------------------------------------------------
Tue Dec 10 19:39:57 UTC 2019 - Michael Ströder <michael@stroeder.com>

- New upstream release 4.2.4

FEATURES:
- Fix #48: Add make distclean that removes config.h made by configure.
  And add maintainer-clean that removes bison and flex output.

BUG FIXES:
- Detect fixed time memcmp for openssl 0.9.8 compatibility.
- Detect EC_KEY_new_by_curve_name for openssl 0.9.8.
- include limits.h for UINT_MAX.
- If no recvmmsg, dont use msg_flags member, but errno for error,
  where our fallback function left it, msg_flags also does not exist
  on some systems.
- Remove unused variable warning for portability.
- Fix #52: do not log transient network full errors unless higher
  verbosity is set.
- Fix regressions in configparser.y where global variables were not
  set for minimal-responses, round-robin and log-time-ascii.

-------------------------------------------------------------------
Wed Nov 20 13:33:09 UTC 2019 - Adam Majer <adam.majer@suse.de>

- New upstream release 4.2.3:
  * confine-to-zone configures NSD to not return out-of-zone
    additional information.
  * pidfile "" allows to run NSD without a pidfile
  * adds support for readiness notification with READY_FD
  * fix excessive logging of ixfr failures, it stops the log when
    fallback to axfr is possible. log is enabled at high verbosity.
  * Fixup warnings during --disable-ipv6 compile.
  * The nsd.conf includes are sorted ascending, for include statements
    with a '*' from glob.
  * Fix log address and failure reason with tls handshake errors,
    squelches (the same as unbound) some unless high verbosity is used.
  * Number of different UDP handlers has been reduced to one.
    recvmmsg and sendmmsg implementations are now used on all platforms.
  * Socket options are now set in designated functions for easy reuse.
  * Socket setup has been simplified for easy reuse.
  * Configuration parser is now aware of the context in which
    an option was specified.
  * document that remote-control is a top-level nsd.conf attribute.

- Remove legacy upgrade of nsd users in %post (boo#1157331)

-------------------------------------------------------------------
Sun Sep  8 14:13:02 UTC 2019 - Michael Ströder <michael@stroeder.com>

- New upstream release 4.2.2:
  * Fix #20: CVE-2019-13207 Stack-based Buffer Overflow in the
    dname_concatenate() function.  Reported by Frederic Cambus.
    It causes the zone parser to crash on a malformed zone file,
    with assertions enabled, an assertion catches it.
  * Fix #19: Out-of-bounds read caused by improper validation of
    array index.  Reported by Frederic Cambus.  The zone parser
    fails on type SIG because of mismatched definition with RRSIG.
  * PR #23: Fix typo in nsd.conf man-page.
  * Fix that NSD warns for wrong length of the hash in SSHFP records.
  * Fix #25: NSD doesn't refresh zones after extended downtime,
    it refreshes the old zones.
  * Set no renegotiation on the SSL context to stop client
    session renegotiation.
  * Fix #29: SSHFP check NULL pointer dereference.
  * Fix #30: SSHFP check failure due to missing domain name.
  * Fix to timeval_add in minievent for remaining second in microseconds.
  * PR #31: nsd-control: Add missing stdio header.
  * PR #32: tsig: Fix compilation without HAVE_SSL.
  * Cleanup tls context on xfrd exit.
  * Fix #33: Fix segfault in service of remaining streams on exit.
  * Fix error message for out of zone data to have more information.

-------------------------------------------------------------------
Tue Jul  9 17:52:44 UTC 2019 - Michael Ströder <michael@stroeder.com>

- New upstream release 4.2.1:
  * FEATURES:
    - Added num.tls and num.tls6 stat counters.
    - PR #12: send-buffer-size, receive-buffer-size,
      tcp-reject-overflow options for nsd.conf, from Jeroen Koekkoek.
    - Fix #14, tcp connections have 1/10 to be active and have to work
      every second, and then they get time to complete during a reload,
      this is a process that lingers with the old version during a version
      update.

* BUG FIXES:
    - Fix #13: Stray dot at the end of some log entries, removes dot
      after updated serial number in log entry.
    - Fix TLS cipher selection, the previous was redundant, prefers
      CHACHA20-POLY1305 over AESGCM and was not as readable as it
      could be.
    - Consolidate server tls context create and remote control context
      create, with hardening for the remote control tls context too.
    - Fix to init event structure for reassignment.
    - Fix to init event not pointer, in reassignment.
    - Fix #15: crash in SSL library, initialize variables for TCP access
      when TLS is configured.
    - Fix tls handshake event callback function mistake, reported
      by Mykhailo Danylenko.
    - Initialize event structures before event_set, to stop uninitialized
      values from setting event library lists and assertions, that would
      sometimes also show after event_del.
    - Do not use symbol from libc, instead use own replacement, if not
      available, for accept4.
    - Fix output of nsd-checkconf -h.

-------------------------------------------------------------------
Tue Jun 11 18:43:46 UTC 2019 - Adam Majer <amajer@suse.com>

- New upstream release 4.2.0:
  * Implement TCP fast open
  * Added DNS over TLS
  * TLS OCSP stapling support with the tls-service-ocsp option
  * New option hide-identity can be used in nsd.conf to stop NSD
    from responding with the hostname for probe queries that
    elicit the chaos class response, this is conform RFC4892
  * Disable TLS1.0, TLS1.1 and weak ciphers, enable CIPHER_SERVER_PREFERENCE

-------------------------------------------------------------------
Mon Mar 25 18:50:27 UTC 2019 - Michael Ströder <michael@stroeder.com>

- Update to upstream release 4.1.27:
  * FEATURES:
    - Deny ANY with only one RR in response, by default.  Patch from
      Daisuke Higashi.  The deny-any statement in nsd.conf sets ANY
      queries over UDP to be further moved to TCP as well.
      Also no additional section processig for type ANY, reducing
      the response size.
    - Fix #4215: on-the-fly change of TSIG keys with patch from Igor, adds
      nsd-control print_tsig, update_tsig, add_tsig, assoc_tsig
      and del_tsig.  These changes are gone after reload, edit the
      config file (or a file included from it) to make changes that
      last after restart.
  * BUG FIXES:
    - Fix #4213: disable-ipv6 and dnstap compile error.
    - Fix to reduce region_log_stats if condition, this removes a
      debug statement.
    - Fix for FreeBSD port with dnstap enabled.
    - Fix to remove unused code.
    - Fix #6: nsd-control-setup: Change validity time to a shorter
      period (<2038).
    - Fix unused definition in header remote.h.
    - Fix #4236: IPV4_MINIMAL_RESPONSE_SIZE=1480 is slightly too big.
    - Fix #4235: IP_PMTUDISC_OMIT on IPv4/UDP sockets.
    - Fixed radtree_insert memory leak.
    - Fixed access recycled variable.

-------------------------------------------------------------------
Tue Dec  4 19:37:05 UTC 2018 - Michael Ströder <michael@stroeder.com>

- Update to upstream release 4.1.26:
  * FEATURES:
    - DNSTAP support for NSD, --enable-dnstap and then config in nsd.conf.
    - Support SO_REUSEPORT_LB in FreeBSD 12 with the reuseport: yes
      option in nsd.conf.
    - Added nsd-control changezone.  nsd-control changezone name pattern
      allows the change of a zone pattern option without downtime for
      the zone, in one operation.
  * BUG FIXES:
    - Fix #4194: Zone file parser derailed by non-FQDN names in RHS of
      DNSSEC RRs.
    - Fix #4202: nsd-control delzone incorrect exit code on error.
    - Tab style fix to use tab for 8 spaces, from Xiaobo Liu.
    - Fix #4205: enable-recvmmsg in mixed IPv4/IPv6 environment fails.
      This sets the msg_hdr.msg_namelen correctly after receipt.
    - Fix to not set GLOB_NOSORT so the nsd.conf include: files are
      sorted and in a predictable order.
    - Fix #3433: document that reconfig does not change per-zone stats.

-------------------------------------------------------------------
Tue Sep 25 18:17:03 UTC 2018 - Michael Ströder <michael@stroeder.com>

- Update to upstream release 4.1.25:
  * FEATURES:
    - nsd-control prints neater errors for file failures.
  * BUG FIXES:
    - Fix that nsec3 precompile deletion happens before the RRs of
      the zone are deleted.
    - Fix printout of accepted remote control connection for unix sockets.
    - Fix use_systemd typo/leftover in remote.c.
    - Fix codingstyle in nsd-checkconf.c in patch from Sharp Liu.
    - append_trailing_slash has one implementation and is not repeated
      differently.
    - Fix coding style in nsd.c
    - Fix to combine the same error function into one, from Xiaobo Liu.
    - Fix initialisation in remote.c.
    - please clang analyzer and fix parse of IPSECKEY with bad gateway.
    - Fix nsd-checkconf fail on bad zone name.
    - Annotate exit functions with noreturn.
    - Remove unused if clause during server service startup.
    - Fix #4156: Fix systemd service manager state change notification
      When it is compiled, systemd readiness signalling is enabled.
      The option in nsd.conf is not used, it is ignored when read.

-------------------------------------------------------------------
Mon Aug 13 20:10:27 UTC 2018 - michael@stroeder.com

- Update to upstream release 4.1.24:
  - Features
    * #4102: control interface via local socket
    * configure --enable-systemd (needs pkg-config and libsystemd) can be 
      used to then use-systemd: yes in nsd.conf and have readiness signalling 
      with systemd.
    * RFC8162 support, for record type SMIMEA.
  - Bug Fixes
    * Patch to fix openwrt for mac os build darwin detection in configure.
    * Fix that first control-interface determines if TLS is used.
      Warn when IP address interfaces are used without TLS.
    * #4106: Fix that stats printed from nsd-control are recast from
      unsigned long to unsigned (remote.c).
    * Fix that type CAA (and URI) in the zone file can contain dots
      when not in quotes.
    * #4133: Fix that when IXFR contains a zone with broken NSEC3PARAM chain,
      NSD leniently attempts to find a working NSEC3PARAM.

-------------------------------------------------------------------
Mon Jul 30 18:47:44 UTC 2018 - michael@stroeder.com

- Update to upstream release 4.1.23:
  - Fix NSD time sensitive TSIG compare vulnerability.

-------------------------------------------------------------------
Tue Jul  3 10:34:07 UTC 2018 - michael@stroeder.com

- Update to upstream release 4.1.22:
  - Features:
    * refuse-any sends truncation (+TC) in reply to ANY queries
    over UDP, and allows TCP queries like normal.
    * Use accept4 to speed up answer of TCP queries
  - Bug fixes:
    * Fix nsec3 hash of parent and child co-hosted nsec3 enabled zones.
    * Fix to use same condition for nsec3 hash allocation and free.

- Changes in version 4.1.21:
  - Features:
    * --enable-memclean cleans up memory for use with memory checkers,
      eg. valgrind.
    * refuse-any nsd.conf option that refuses queries of type ANY.
    * lower memory usage for tcp connections, so tcp-count can be
      higher.
  - Bug fixes:
    * Fix spelling error in xfr-inspect.
    * Fix buffer size warnings from compiler on filename lengths.

-------------------------------------------------------------------
Wed Feb 21 09:52:31 UTC 2018 - mvetter@suse.com

- Update to 4.1.20:
  + Fix memory leak in zone file read of unknown rr formatted RRs.
  + Fix memory leak when rehashing nsec3 after axfr or zonefile
    read, in the selectively allocated precompiled nsec3 hashes.

-------------------------------------------------------------------
Mon Feb 19 10:17:15 UTC 2018 - adam.majer@suse.de

- Own missing ownership for %_tmpfilesdir

-------------------------------------------------------------------
Fri Feb 16 08:07:47 UTC 2018 - adam.majer@suse.de

- More specfile cleanup:
  + Drop SysV support from package (and hence usage of fillup)
  + Don't redefine %_rundir
  + Drop useless BuildRequires on systemd-devel

-------------------------------------------------------------------
Mon Feb 12 11:50:14 UTC 2018 - jengelh@inai.de

- Check group existence before creating it, for real.
- Stop deleting users from the system, it might remove a legitimate
  user that nsd unfortunately shared its name with.

-------------------------------------------------------------------
Mon Feb 12 08:54:46 UTC 2018 - adam.majer@suse.de

- Create a system user, not a regular user
- Check if user/group already exists and are in system range
- Do not ignore return values from user/group creation
- Own the config zones directory

-------------------------------------------------------------------
Mon Feb  5 10:26:02 UTC 2018 - adam.majer@suse.de

- drop insserv requires on SLE12+ and openSUSE
- nsd-lintrpmrc: drop most overrides
- don't install config file as sample
- switch to using user/group names _nsd to match expected names
  as per recent rpmlint changes as not to conflict with admin
  created names.
- update and change current owner during upgrade

-------------------------------------------------------------------
Tue Jan  2 11:18:40 UTC 2018 - michael@stroeder.com

- update to 4.1.19 with the following bug fixes:
  * ignore fallthrough compiler warning in flex EOF rule.
  * Fix warnings emitted by clang for --enable-packed.  Alignment is not
    a problem for x86_64, don't enable packed when the platform
    requires aligned access.
  * Fix spelling error in xfr-inspect.
  * Fix 3392: Fix regression in 4.1.18 for notify lists with ip4
    and ip6 targets.

-------------------------------------------------------------------
Thu Nov 30 14:15:02 UTC 2017 - michael@stroeder.com

- update to 4.1.18
  - Features
    * xfr-inspect, it is not installed, it prints xfr files from /tmp made 
      with 'make xfr-inspect' in the source dir.
    * retry timeout between sending notifies dropped from 15 to 3 sec.
    * NSD sends 16 notifies simultaneously.
    * configure --enable-packed reduces memory usage, at expense of unaligned 
      reads. Saves about 17%.
    * Save memory by selectively allocate precompiled nsec3 hashes, saves 
      about 16% memory.
    * make ip-transparent option work on OpenBSD.
    * Save about 2% memory by changing usage count size in name tree.
    * Fix #2871: Increase number of sockets for xfrd transfers.
  - Bugfixes
    * Fix gcc 7.1.1 warnings.
    * Fix writev compile warning on FreeBSD.
    * Fix #1446: A corrupted zone file "propagates" to good ones.
    * nsd-control zonestatus prints wait time between attempts, for zones 
      that are in that waiting time.
    * Fix collision printout of nsec3 to print name, hash and reverse.
    * Fix #1567: Change crit to err log level for gettimeofday failure. Add 
      defines for compile without syslog.
    * Fix crash for DS query when parent and child zones both configured in 
      nsd.conf and parent zone has not loaded properly.

-------------------------------------------------------------------
Mon Sep  4 17:13:03 UTC 2017 - michael@stroeder.com

- update to 4.1.17
  - Features
    * zone parser parses type AVC (it has TXT format).
    * Fix #1272: use writev to put tcp length field with data for
      outgoing zone transfer requests.
  - Bugfixes
    * Fix potential null pointer in nsec3 adjustment tree.
    * Fix text format of deletes for CDS and CDNSKEY, single 0 to
      represent empty base64 or hex string.

-------------------------------------------------------------------
Mon May  8 21:55:51 UTC 2017 - michael@stroeder.com

- update to 4.1.16
  - Features
    * zone parser can parse acronyms for algorithms ED25519 and ED448.
    * Fix 1243: Option to make NSD emit really minimal responses, 
      minimal-responses: yes in nsd.conf.
  - Bugfixes
    * Calculate new udb index after growing the array, fix from Chaofeng Liu.
    * Fix missing _t to _type conversion for disable-radix-tree option.
    * Printout serial error with hint it may be too big.
    * Fix 1228: OpenSSL include is not guarded with HAVE_SSL
    * Patch for expire state in multi-master when masters includes broken 
      master, from Manabu Sonoda.
    * minor manpage fix.

-------------------------------------------------------------------
Mon Apr 24 15:00:38 UTC 2017 - michael@stroeder.com

- update to 4.1.15
  * Fix nsd-control and ipv6 only.
  * Squelch zone transfer error address family not supported by protocol at 
    low verbosity levels.
  * Fix #1195: Fix so that NSD fails on non-compliant values for Serial.
  * Fix to rename _t typedefs because POSIX reserves them.
  * Fix that nsec3 hash collisions only reported on verbosity level 3.

-------------------------------------------------------------------
Fri Jan 13 14:33:29 UTC 2017 - michael@stroeder.com

- update to 4.1.14
  - Features
    * Fix #1132 for SERVFAIL zones perform backoff, and remembers the timeout 
      on next startup.
  - Bugfixes
    * Fix null memcpy for radixtree with single link element.
    * Robust fix against missing master in tcp_open for xfrd.
    * Fix wildcards in include: config statements with chroot enabled.
    * suppress compile warning in lex files.
    * Fix to try every master once, then wait for timeout or notify.
    * Save backoff timeout into xfrd.state file, this file has a higher 
      version number now. Old files are skipped silently (causes refresh) and 
      created as new files upon exit.
    * Fix restart of zone transfers when new config becomes available.

-------------------------------------------------------------------
Tue Oct 11 11:36:47 UTC 2016 - adam.majer@suse.de

- fix tmpfiles-nsd.conf to point to /run instead of /var/run
- add nsd-rpmlintrc to not display some bogus errors
- put log files into /var/log/nsd/
- put sample config in documentation directory
- update to 4.1.13
  - FEATURES
    - multi-master-check: yes can be used to check all masters for
      the last version, using the higher version from the
      configured masters
    - Support RR type OPENPGPKEY from RFC 7929.
    - Can config key algorithms with the digest name, eg. 'sha256'.
    - configure --disable-radix-tree for about 15% lower memory
      usage.
    - for type SRV add A/AAAA to the additional section (if
      possible), just like we already do for type MX.
    - more extensible edns option handling.
    - When tcp is more than half full, use short timeout for tcp
      session.
    - Patch for {max,min}-{refresh,retry}-time
    - Fix #790: size-limit-xfr can stop NSD from downloading
      infinite zone transfer data size, from Toshifumi Sakaguchi.
      Fixes CVE-2016-6173f

- BUGFIXES
    - Fix compile warnings about unused result from write and
      strtol. and signcompare in minmax retrytime.
    - Fix #812: fix that make depend fails after distribution.
    - Fix #817: xfrd update failed loop.
    - Add robustness against unallocated data in nsec3 trees.
    - Fix README spelling error of BSD license
    - Fix multimaster for not tried full zone transfer for a
      expired zone.
    - Fix #827: fix compile with openssl 1.1.0 with api=1.1.0.
    - Fix malformed edns query assertion failure
    - Fix build without IPv6, patch from Zdenek Kaspar.
    - Fix #783: Trying to run a root server without having
      configured it silently gives wrong answers.
    - Fix #782: Serve DS record but parent zone has no NS record.
    - Fix nsec3 missing for nsec3 signed parent and child for DS at
      zonecut.

-------------------------------------------------------------------
Mon Aug  8 13:10:49 UTC 2016 - adam.majer@suse.de

- reword description and summary
- add signature file and basic keyring (currently only contains
  signature of the released version since upstream doesn't seem
  to distribute a real keyring)
- remove redundant nsec3 configure option which are enabled by default
- remove obsolete --enable-draft-rrtypes configure

-------------------------------------------------------------------
Wed Jun 29 01:11:13 UTC 2016 - mrueckert@suse.de

- update to 4.1.10
  - FEATURES:
    - ip-freebind: yesno option in nsd.conf sets IP_FREEBIND socket
      option for Linux, binds to interfaces and addresses that are
      down.
    - NSD includes AAAA before A for queries over IPV6 (in
      delegations).  And TC is set if no glue can be provided with
      a delegation because of packet size.
    - print notice that nsd is starting before taking off.
  - BUG FIXES:
    - Fix for openssl 1.1.0, HMAC_CTX size not exported from
      openssl.
    - Fix #751: NSD fails to occlude names below a DNAME.
    - If set without nsd.db print "" as the default in the man
      pages.
    - Fix #755: NSD spins after a zone update and a lot of TCP
      queries.
    - Fix for NSEC3 with zone signed without exact match for empty
      nonterminals, the answer for that domain gets closest
      encloser.
    - #772 Document that recvmmsg has IPv6 problems on some linux
      kernels.

-------------------------------------------------------------------
Tue May 10 21:58:55 UTC 2016 - mrueckert@suse.de

- update to 4.1.9
  - Change the nsd.db file version because of nanosecond precision
    fix.
- changes from 4.1.8
  - #732: tcp-mss, outgoing-tcp-mss options for nsd.conf, patch
    from Daisuke Higashi.
  - #739: zonefile changes when mtime is small are detected on
    reload, if filesystem supports precision mtime values.
  - RR type CSYNC (RFC7477) syntax is supported.
  - take advantage of arc4random_uniform if available, patch from
    Loganaden Velvindron.
  - Fix flto check for OSX clang.
  - Define _DEFAULT_SOURCE with _BSD_SOURCE for glibc 2.20 on
    Linux.
  - Fix #736: segfault during zone transfer.
  - Fix #744: Fix that NSD replies for configured but unloaded zone
    with SERVFAIL, not REFUSED.

-------------------------------------------------------------------
Tue Dec 29 23:41:33 UTC 2015 - mrueckert@suse.de

- update to 4.1.7
  - support configure --with-dbfile="" for nodb mode by default,
    where there is no binary database, but nsd reads and writes
    zonefiles.
  - reuseport: no is the default, because the feature is not
    troublefree.
  - configure --enable-ratelimit-default-is-off with
    --enable-ratelimit to set the default ratelimit to disabled but
    available in nsd.conf.
  - version: "string" option to set chaos version query reply
    string.
  - Fix zones updates from nsd parent event loop when there are a
    lot of interfaces.
  - portability fixes.
  - patch from Doug Hogan for SSL_OP_NO_SSLvx options, for the new
    defaults in the ssl libraries.
  - updated contrib/nsd.spec, from Bálint Szigeti, with new
    configure options.
  - Allocate less memory for TSIG digest.
  - Fix #721: Fix wrong error code (FORMERR) returned for unknown
    opcode.  NOTIMP expected.
  - Fix zonec ttl mismatch printout to include more information.
  - Fix TCP responses when REUSEPORT is in use by turning it off.
  - Document default in manpage for rrl-slip, ip4 and 6
    prefixlength.
  - Explain rrl-slip better in documentation.
  - Document that ratelimit qps and slip are updated in reconfig.
  - Fix up defaults in manpage.

-------------------------------------------------------------------
Thu Nov 26 00:03:05 UTC 2015 - mrueckert@suse.de

- enable zone stats

-------------------------------------------------------------------
Wed Nov 25 23:32:33 UTC 2015 - mrueckert@suse.de

- update to 4.1.6
  - Fix compile of zonec error message on FreeBSD.
  - nsd-checkconf warns for master zones with no zonefile
    statement.
  - Fix start failure when many file descriptors are in use.
  - The servfail rcode is not printed with a space in the middle.
  - fixup file descriptor fixup nicer.
  - print failed token for config syntax error or parse error.
  - Fix #711: Document that debug-mode yes is used for staying
    attached to the supervisor console.
  - Document verbosity 3 prints more information.
  - makedist.sh print on pgp signature creation.
  - Fix typo in zonec.c inside error message.
  - Fix #701: Fix that AD=1 set in a BADVERS response.
  - Fix #706: default port 53 not opened on ip4 because of
    getaddrinfo hints initialisation failure.
  - Fix #698 formatting errors and typos in nsd.8.in.
  - Add --enable-pie and --enable-relro-now options.
  - Admitted axfrs are logged at verbosity 1.  Refused at verbosity
    2.
  - Fixed checkconf test for reuseport setting.
  - SO_REUSEPORT does not work on FreeBSD.  Enabled by default on
    Linux, not enabled by default on other OSes.
  - Fix that notify from nsd-control contains soa serial.
  - squelch SO_REUSEPORT failure on verbosity less than 3.
  - removed hardcoded interface limit, --with-max-ips removed.
  - SO_REUSEPORT support.
  - Fix #618: documented need to list ip-addresses seperately in
    nsd.conf if there are multiple, because the source address of
    replies can otherwise go wrong.
  - Fix that for expired zones NSD performs an AXFR and accepts
    newer and older serial numbers.
  - Document that minimal responses only minimizes responses to fit
    in one datagram.  It does not minimize smaller responses.
  - Fix NSID response for short edns sizes.
  - Trunk contains 4.1.4 in development.
  - improve nsd-control usage text. (23 june - added to 4.1.3)
  - RFC7553 RR Type URI support.
  - Fix redefined macro lex warning for freebsd flex.
  - Fix that formerrors are ratelimited.
  - max-interfaces raised to 32.
  - removed unused defines for unofficial tsig-hmac algorithm
    codes.  The TSIG algorithm is identified by name in the config
    file.
  - hmac sha224, sha384 and sha512 support, patch from David
    Gwynne.
  - Fix crash in zone parser for relative dname after error in
    origin.
  - Test for zone parser failures
  - nsd-control addzones and delzones read list of zones from
    stdin.
  - Fix task and zonestat files to be stored in a subdirectory in
    tmp to stop privilege elevation.
  - printout names for successful addition and removal with bulk
    command.
  - Fix #665: when removing subdomain, nsd does not reparse parent
    zone.
  - trunk contains 4.1.3(upcoming).
  - Made log message more consistent, changed 'axfr refused' log
    message to be more consistent with other messages.  Also notify
    refused.
  - verbosity 2 logs axfr refused and notify refused.  verbosity 1
    contains less log messages.
  - Fix #654: Fix contradiction in notify logging verbosity level.
  - Incoming notifies have serial number logged (at verbosity 1).
  - Fix #655: Fix contradiction in verbosity for zone transfers.
  - Use reallocarray for integer overflow protection, patch
    submitted by Loganaden Velvindron.
  - Fix allocation integer overflow checks.
  - Fix buffer overflow in config parse of domain name, reported by
    John Van de Meulebrouck Brendgard.
  - Updated default keylength in nsd-control-setup to 3k.
  - Fix use after free after zonefile syntax error followed by ttl
    or origin directive, reported by John Van de Meulebrouck
    Brendgard.
  - Fix syntax error followed by too many TXT elements parse crash
    reported by John Van de Meulebrouck Brendgard.
  - Fix origin directive from unused old value and subdomain parser
    failure, reported by John Van de Meulebrouck Brendgard.
  - Fix b64pton out of bounds error on invalid zonefile input
    reported by John Van de Meulebrouck Brendgard.
  - Fix segfault on double origin in zone reader (thanks John Van
    de Meulebrouck Brendgard).
  - Remove dead code domain_table_iterate.
  - Fix segfault in zone reader on invalid input reported by John
    Van de Meulebrouck Brendgard.
  - Fix #642: Change 'zone read with no errors' to '.. with
    success'.  Patch from Benedikt Heine.

-------------------------------------------------------------------
Tue Oct 13 05:46:28 UTC 2015 - michael@stroeder.com

- ignore absence of the systemd-tmpfiles command

-------------------------------------------------------------------
Wed Mar 11 01:33:27 UTC 2015 - mrueckert@suse.de

- update to 4.1.1
  - RFC 7344: CDS and CDNSKEY (read record types).
  - per zone statistics with --enable-zone-stats, config zone with
    zonestats: "name", zones configured with the same string are
    added.
  - Disabled use of SSLv3 in nsd-control.
  - nsd-checkconf -f prints out full name of pidfile (with dir).
  - Synthesize CNAMEs with same TTL as DNAME.
  - Fix that expired zones stay expired after a server restart.
  - Fix "xfrd_handle_ipc: bad mode" log errors when compiled with
    --disable-bind8-stats.
  - Fix #616: retry xfer for zones with no content after command.
  - Fix char used as array index warnings on NetBSD.
  - Fix that queries for noname CH TXT are REFUSED instead of
    nodata.
  - Fixes for wildcard addition and deletion, speedup for some
    cases.
  - Fix that failure to add tcp to tcp base does not leak the
    socket.
  - Patch nsd_munin_ from Philip Paeps to use type ABSOLUTE.
  - Fix spinning NSD with lots of failing transfers, due to pointer
    comparison using void pointer subtraction (from Otto Moerbeek).
  - Fix bug#637: fix that nsd.db grows limitlessly, an off by one
    on one megabyte free chunks, created during AXFRs of large
    zones, that caused the one megabyte chunk to be leaked.
  - Fix casts for ctype functions (from Todd Miller).
  - correct some hyphen-used-as-minus-sign (from Andreas Schulze)
    in man pages.
  - Fix zonesdir chroot error message.

-------------------------------------------------------------------
Mon Dec 15 12:29:05 UTC 2014 - mrueckert@suse.de

- update to 4.1.0
  see /usr/share/doc/packages/NSD-4-features for the important
  changes

-------------------------------------------------------------------
Sun Dec 29 04:24:32 UTC 2013 - mrueckert@suse.de

- update to 4.0.0
  see /usr/share/doc/packages/NSD-4-features for the important
  changes
- added systemd support

-------------------------------------------------------------------
Wed Aug 15 10:07:44 UTC 2012 - mrueckert@suse.de

- update to 3.2.13: (bnc#774600)
  see /usr/share/doc/packages/nsd/ChangeLog

This fixes VU#517036 CVE-2012-2979 and VU#624931 CVE-2012-2978.

-------------------------------------------------------------------
Tue Apr 12 02:24:10 UTC 2011 - mrueckert@suse.de

- update to 3.2.8
  see /usr/share/doc/packages/nsd/ChangeLog

-------------------------------------------------------------------
Wed Sep  1 16:29:48 UTC 2010 - suse-tux@gmx.de

- fixed build

-------------------------------------------------------------------
Mon Feb  1 19:51:54 UTC 2010 - mrueckert@suse.de

- use the pid when sending signnals to nsd

-------------------------------------------------------------------
Thu Mar 29 17:16:54 CEST 2007 - mrueckert@suse.de

- added pwdutils explicitly to the requires/buildrequires.
- add log file to the package

-------------------------------------------------------------------
Thu Mar 29 07:15:13 CEST 2007 - mrueckert@suse.de

- update to 3.0.5

Places

File nsd.changes of Package nsd

Places