File clamav-conf.patch of Package clamav

Overview Repositories Revisions Requests Users Attributes Meta

File clamav-conf.patch of Package clamav (Revision 8be9acb2ea49e342e47d06b87d185548)

Currently displaying revision 8be9acb2ea49e342e47d06b87d185548 , Show latest

Index: etc/clamav-milter.conf
===================================================================
--- etc/clamav-milter.conf.orig
+++ etc/clamav-milter.conf
@@ -2,10 +2,6 @@
 ## Example config file for clamav-milter
 ##
 
-# Comment or remove the line below.
-Example
-
-
 ##
 ## Main options
 ##
@@ -17,8 +13,7 @@ Example
 # inet6:port@[hostname|ip-address] - to specify an ipv6 socket
 #
 # Default: no default
-#MilterSocket /tmp/clamav-milter.socket
-#MilterSocket inet:7357
+MilterSocket /var/lib/clamav/clamav-milter-socket
 
 # Define the group ownership for the (unix) milter socket.
 # Default: disabled (the primary group of the user running clamd)
@@ -36,7 +31,7 @@ Example
 # Run as another user (clamav-milter must be started by root for this option to work)
 #
 # Default: unset (don't drop privileges)
-#User clamav
+User vscan
 
 # Initialize supplementary group access (clamav-milter must be started by root).
 #
@@ -64,7 +59,7 @@ Example
 # daemon (main thread).
 #
 # Default: disabled
-#PidFile /var/run/clamav-milter.pid
+PidFile /var/lib/clamav/clamav-milter.pid
 
 # Optional path to the global temporary directory.
 # Default: system specific (usually /tmp or /var/tmp).
@@ -90,7 +85,7 @@ Example
 # with the same socket: clamd servers will be selected in a round-robin fashion.
 #
 # Default: no default
-#ClamdSocket tcp:scanner.mydomain:7357
+ClamdSocket unix:/var/lib/clamav/clamd-socket
 
 
 ##
@@ -238,13 +233,13 @@ Example
 # Use system logger (can work together with LogFile).
 #
 # Default: no
-#LogSyslog yes
+LogSyslog yes
 
 # Specify the type of syslog messages - please refer to 'man syslog'
 # for facility names.
 #
 # Default: LOG_LOCAL6
-#LogFacility LOG_MAIL
+LogFacility LOG_MAIL
 
 # Enable verbose logging.
 #
Index: etc/clamd.conf
===================================================================
--- etc/clamd.conf.orig
+++ etc/clamd.conf
@@ -1,12 +1,8 @@
 ##
-## Example config file for the Clam AV daemon
+## Config file for the Clam AV daemon
 ## Please read the clamd.conf(5) manual before editing this file.
 ##
 
-
-# Comment or remove the line below.
-Example
-
 # Uncomment this option to enable logging.
 # LogFile must be writable for the user running daemon.
 # A full path is required.
@@ -40,12 +36,12 @@ Example
 
 # Use system logger (can work together with LogFile).
 # Default: no
-#LogSyslog yes
+LogSyslog yes
 
 # Specify the type of syslog messages - please refer to 'man syslog'
 # for facility names.
 # Default: LOG_LOCAL6
-#LogFacility LOG_MAIL
+LogFacility LOG_MAIL
 
 # Enable verbose logging.
 # Default: no
@@ -59,7 +55,7 @@ Example
 # This option allows you to save a process identifier of the listening
 # daemon (main thread).
 # Default: disabled
-#PidFile /var/run/clamd.pid
+PidFile /var/lib/clamav/clamd.pid
 
 # Optional path to the global temporary directory.
 # Default: system specific (usually /tmp or /var/tmp).
@@ -78,7 +74,7 @@ Example
 
 # Path to a local socket file the daemon will listen on.
 # Default: disabled (must be specified by a user)
-#LocalSocket /tmp/clamd.socket
+LocalSocket /var/lib/clamav/clamd-socket
 
 # Sets the group ownership on the unix socket.
 # Default: disabled (the primary group of the user running clamd)
@@ -94,14 +90,14 @@ Example
 
 # TCP port address.
 # Default: no
-#TCPSocket 3310
+TCPSocket 3310
 
 # TCP address.
 # By default we bind to INADDR_ANY, probably not wise.
 # Enable the following to provide some degree of protection
 # from the outside world.
 # Default: no
-#TCPAddr 127.0.0.1
+TCPAddr 127.0.0.1
 
 # Maximum length the queue of pending connections may grow to.
 # Default: 15
@@ -188,7 +184,7 @@ Example
 
 # Run as another user (clamd must be started by root for this option to work)
 # Default: don't drop privileges
-#User clamav
+User vscan
 
 # Initialize supplementary group access (clamd must be started by root).
 # Default: no
@@ -423,6 +419,10 @@ Example
 # Enable Clamuko. Dazuko must be configured and running. Clamuko supports
 # both Dazuko (/dev/dazuko) and DazukoFS (/dev/dazukofs.ctrl). DazukoFS
 # is the preferred option. For more information please visit www.dazuko.org
+#
+# When enabling this, you most probably have to set "User root" above,
+# so that clamav can access the files to be scanned.
+#
 # Default: no
 #ClamukoScanOnAccess yes
 
Index: etc/freshclam.conf
===================================================================
--- etc/freshclam.conf.orig
+++ etc/freshclam.conf
@@ -1,12 +1,8 @@
 ##
-## Example config file for freshclam
+## Config file for freshclam
 ## Please read the freshclam.conf(5) manual before editing this file.
 ##
 
-
-# Comment or remove the line below.
-Example
-
 # Path to the database directory.
 # WARNING: It must match clamd.conf's directive!
 # Default: hardcoded (depends on installation options)
@@ -34,21 +30,21 @@ Example
 
 # Use system logger (can work together with UpdateLogFile).
 # Default: no
-#LogSyslog yes
+LogSyslog yes
 
 # Specify the type of syslog messages - please refer to 'man syslog'
 # for facility names.
 # Default: LOG_LOCAL6
-#LogFacility LOG_MAIL
+LogFacility LOG_MAIL
 
 # This option allows you to save the process identifier of the daemon
 # Default: disabled
-#PidFile /var/run/freshclam.pid
+PidFile /var/lib/clamav/freshclam.pid
 
 # By default when started freshclam drops privileges and switches to the
 # "clamav" user. This directive allows you to change the database owner.
 # Default: clamav (may depend on installation options)
-#DatabaseOwner clamav
+DatabaseOwner vscan
 
 # Initialize supplementary group access (freshclam must be started by root).
 # Default: no
@@ -111,7 +107,7 @@ DatabaseMirror database.clamav.net
 
 # Send the RELOAD command to clamd.
 # Default: no
-#NotifyClamd /path/to/clamd.conf
+NotifyClamd /etc/clamd.conf
 
 # Run command after successful database update.
 # Default: disabled
@@ -157,7 +157,7 @@
 # detected in the field and in what geographic area they are.
 # Freshclam will connect to clamd in order to get recent statistics.
 # Default: no
-#SubmitDetectionStats /path/to/clamd.conf
+#SubmitDetectionStats /etc/clamd.conf
 
 # Country of origin of malware/detection statistics (for statistical
 # purposes only). The statistics collector at ClamAV.net will look up

Places

File clamav-conf.patch of Package clamav (Revision 8be9acb2ea49e342e47d06b87d185548)

Places