File wpa_supplicant.changes of Package wpa_supplicant

Overview Repositories Revisions Requests Users Attributes Meta

File wpa_supplicant.changes of Package wpa_supplicant (Revision 696496c23c87f13be90da8b0ab4085f2)

Currently displaying revision 696496c23c87f13be90da8b0ab4085f2 , Show latest

-------------------------------------------------------------------
Thu Sep 18 12:32:57 UTC 2014 - schwab@suse.de

- Avoid spurious dependency on /usr/bin/python due to executable doc files

-------------------------------------------------------------------
Wed Aug 20 08:39:19 UTC 2014 - lnussel@suse.de

- fix dbus systemd activation (bnc#892683)

-------------------------------------------------------------------
Thu Jun 26 11:30:11 UTC 2014 - lnussel@suse.de

- don't use systemctl enable in %post. Needs to be handled by presets.

-------------------------------------------------------------------
Thu Jun 19 07:34:35 UTC 2014 - glin@suse.com

- Update the build config based on the new defconfig
- Remove the libnl1 requirement. It's not supported.

-------------------------------------------------------------------
Mon Jun 16 04:28:45 UTC 2014 - glin@suse.com

- Update to 2.2
  * added DFS indicator to get_capability freq
  * added/fixed nl80211 functionality
  * removed unused NFC_RX_HANDOVER_REQ and NFC_RX_HANDOVER_SEL
    control interface commands (the more generic
    NFC_REPORT_HANDOVER is now used)
  * fixed MSCHAP UTF-8 to UCS-2 conversion for three-byte encoding
  * P2P enhancements/fixes
  * added phase1 network parameter options for disabling TLS v1.1
    and v1.2 to allow workarounds with misbehaving AAA servers
  * Interworking/Hotspot 2.0 enhancements
  * fixed TDLS interoperability issues with supported operating
    class in
  * some deployed stations
  * internal TLS implementation enhancements/fixes
  * fixed PTK derivation for CCMP-256 and GCMP-256
  * added "reattach" command for fast reassociate-back-to-same-BSS
  * added "get_capability tdls" command
  * D-Bus interface extensions/fixes
  * fixed potential segmentation fault and memory leaks in WNM
    neighbor report processing
  * EAP-pwd fixes
  * added MACsec/IEEE Std 802.1X-2010 PAE implementation
  * fixed a memory leak in SAE random number generation
  * fixed EAPOL-Key exchange when GCMP is used with SHA256-based
    AKM
  * added support for simultaneous authentication of equals (SAE)
    for stronger password-based authentication with WPA2-Personal
  * improved P2P negotiation and group formation robustness
  * improved P2P channel selection
  * added nl80211 functionality
    - VHT configuration for nl80211
    - MFP (IEEE 802.11w) information for nl80211 command API
    - support split wiphy dump
    - FT (IEEE 802.11r) with driver-based SME
    - use advertised number of supported concurrent channels
    - QoS Mapping configuration
  * improved TDLS negotiation robustness
  * added 'SCAN TYPE=ONLY' ctrl_iface command to request manual
    scan without executing roaming/network re-selection on scan
    results
  * added Session-Id derivation for EAP peer methods
  * allow AP/Enrollee to be specified with BSSID instead of UUID
    for WPS ER operations
  * changed the default driver interface from wext to nl80211 if
    both are included in the build
  * added domain_suffix_match (and domain_suffix_match2 for Phase 2
    EAP-TLS) to specify additional constraint for the server
    certificate domain name
  * added support for WPS+NFC updates and P2P+NFC
- Drop wpa_supplicant-driver-wext-debug.patch and
  wpa_supplicant-errormsg.patch: wext is deprecated
- Enable AP mode, P2P, RSN IBSS, EAP FAST, EAP AKA, and WPS NFC

-------------------------------------------------------------------
Thu May  8 11:18:08 CEST 2014 - ro@suse.de

- use _rundir macro

-------------------------------------------------------------------
Mon Sep  9 09:18:17 UTC 2013 - fcrozat@suse.com

- Add systemd service file, to properly track wpa_supplicant in
  its own systemd service (and not in dbus one).
- Always enable systemd service, it is still dbus activated.

-------------------------------------------------------------------
Wed Apr 24 03:48:27 UTC 2013 - glin@suse.com

- Update to 2.0
  * removed Qt3-based wpa_gui (obsoleted by wpa_qui-qt4)
  * removed unmaintained driver wrappers broadcom, iphone, osx,
    ralink, hostap, madwifi (hostap and madwifi remain available
    for hostapd; their wpa_supplicant functionality is obsoleted
    by wext)
  * improved debug logging (human readable event names, interface
    name included in more entries)
  * changed AP mode behavior to enable WPS only for open and
    WPA/WPA2-Personal configuration
  * improved P2P concurrency operations
    - better coordination of concurrent scan and P2P search
      operations
    - avoid concurrent remain-on-channel operation requests by
      canceling previous operations prior to starting a new one
    - reject operations that would require multi-channel
      concurrency if the driver does not support it
    - add parameter to select whether STA or P2P connection is
      preferred if the driver cannot support both at the same time
    - allow driver to indicate channel changes
    - added optional delay=<search delay in milliseconds> parameter
      for p2p_find to avoid taking all radio resources
    - use 500 ms p2p_find search delay by default during concurrent
      operations
    - allow all channels in GO Negotiation if the driver supports
      multi-channel concurrency
  * added number of small changes to make it easier for static
    analyzers to understand the implementation
  * fixed number of small bugs (see git logs for more details)
  * nl80211: number of updates to use new cfg80211/nl80211
    functionality
    - replace monitor interface with nl80211 commands for AP mode
    - additional information for driver-based AP SME
    - STA entry authorization in RSN IBSS
  * EAP-pwd:
    - fixed KDF for group 21 and zero-padding
    - added support for fragmentation
    - increased maximum number of hunting-and-pecking iterations
  * avoid excessive Probe Response retries for broadcast Probe
    Request frames (only with drivers using wpa_supplicant AP mode
    SME/MLME)
  * added "GET country" ctrl_iface command
  * do not save an invalid network block in wpa_supplicant.conf to
    avoid problems reading the file on next start
  * send STA connected/disconnected ctrl_iface events to both the
    P2P group and parent interfaces
  * added preliminary support for using TLS v1.2 (CONFIG_TLSV12=y)
  * added "SET pno <1/0>" ctrl_iface command to start/stop
    preferred network offload with sched_scan driver command
  * merged in number of changes from Android repository for P2P,
    nl80211, and build parameters
  * changed P2P GO mode configuration to use driver capabilities
    to automatically enable HT operations when supported
  * added "wpa_cli status wps" command to fetch WPA2-Personal
    passhrase for WPS use cases in AP mode
  * EAP-AKA: keep pseudonym identity across EAP exchanges to match
    EAP-SIM behavior
  * improved reassociation behavior in cases where association is
    rejected or when an AP disconnects us to handle common load
    balancing mechanisms
    - try to avoid extra scans when the needed information is
      available
  * added optional "join" argument for p2p_prov_disc ctrl_iface
    command
  * added group ifname to P2P-PROV-DISC-* events
  * added P2P Device Address to AP-STA-DISCONNECTED event and use
    p2p_dev_addr parameter name with AP-STA-CONNECTED
  * added workarounds for WPS PBC overlap detection for some P2P
    use cases where deployed stations work incorrectly
  * optimize WPS connection speed by disconnecting prior to WPS
    scan and by using single channel scans when AP channel is
    known
  * PCSC and SIM/USIM improvements:
    - accept 0x67 (Wrong length) as a response to READ RECORD to
      fix issues with some USIM cards
    - try to read MNC length from SIM/USIM
    - build realm according to 3GPP TS 23.003 with identity from
      the SIM
    - allow T1 protocol to be enabled
  * added more WPS and P2P information available through D-Bus
  * improve P2P negotiation robustness
    - extra waits to get ACK frames through
    - longer timeouts for cases where deployed devices have been
      identified have issues meeting the specification
      requirements
    - more retries for some P2P frames
    - handle race conditions in GO Negotiation start by both
      devices
    - ignore unexpected GO Negotiation Response frame
  * added support for libnl 3.2 and newer
  * added P2P persistent group info to P2P_PEER data
  * maintain a list of P2P Clients for persistent group on GO
  * AP: increased initial group key handshake retransmit timeout to
    500 ms
  * added optional dev_id parameter for p2p_find
  * added P2P-FIND-STOPPED ctrl_iface event
  * fixed issues in WPA/RSN element validation when roaming with
    ap_scan=1 and driver-based BSS selection
  * do not expire P2P peer entries while connected with the peer in a
    group
  * fixed WSC element inclusion in cases where P2P is disabled
  * AP: added a WPS workaround for mixed mode AP Settings with
    Windows 7
  * EAP-SIM: fixed AT_COUNTER_TOO_SMALL use
  * EAP-SIM/AKA: append realm to pseudonym identity
  * EAP-SIM/AKA: store pseudonym identity in network configuration
    to allow it to persist over multiple EAP sessions and
    wpa_supplicant restarts
  * EAP-AKA': updated to RFC 5448 (username prefixes changed);
    note: this breaks interoperability with older versions
  * added support for WFA Hotspot 2.0
    - GAS/ANQP to fetch network information
    - credential configuration and automatic network selections
      based on credential match with ANQP information
  * limited PMKSA cache entries to be used only with the network
    context that was used to create them
  * improved PMKSA cache expiration to avoid unnecessary
    disconnections
  * adjusted bgscan_simple fast-scan backoff to avoid too frequent
    background scans
  * removed ctrl_iface event on P2P PD Response in join-group case
  * added option to fetch BSS table entry based on P2P Device
    Address ("BSS p2p_dev_addr=<P2P Device Address>")
  * added BSS entry age to ctrl_iface BSS command output
  * added optional MASK=0xH option for ctrl_iface BSS command to
    select which fields are included in the response
  * added optional RANGE=ALL|N1-N2 option for ctrl_iface BSS
    command to fetch information about several BSSes in one call
  * simplified licensing terms by selecting the BSD license as the
    only alternative
  * added "P2P_SET disallow_freq <freq list>" ctrl_iface command
    to disable channels from P2P use
  * added p2p_pref_chan configuration parameter to allow preferred
    P2P channels to be specified
  * added support for advertising immediate availability of a WPS
    credential for P2P use cases
  * optimized scan operations for P2P use cases (use single channel
    scan for a specific SSID when possible)
  * EAP-TTLS: fixed peer challenge generation for MSCHAPv2
  * SME: do not use reassociation after explicit disconnection
    request (local or a notification from an AP)
  * added support for sending debug info to Linux tracing (-T on
    command line)
  * added support for using Deauthentication reason code 3 as an
    indication of P2P group termination
  * added wps_vendor_ext_m1 configuration parameter to allow
    vendor specific attributes to be added to WPS M1
  * started using separate TLS library context for tunneled TLS
    (EAP-PEAP/TLS, EAP-TTLS/TLS, EAP-FAST/TLS) to support different
    CA certificate configuration between Phase 1 and Phase 2
  * added optional "auto" parameter for p2p_connect to request
    automatic GO Negotiation vs. join-a-group selection
  * added disabled_scan_offload parameter to disable automatic scan
    offloading (sched_scan)
  * added optional persistent=<network id> parameter for
    p2p_connect to allow forcing of a specific SSID/passphrase for
    GO Negotiation
  * added support for OBSS scan requests and 20/40 BSS coexistence
    reports
  * reject PD Request for unknown group
  * removed scripts and notes related to Windows binary releases
    (which have not been used starting from 1.x)
  * added initial support for WNM operations
    - Keep-alive based on BSS max idle period
    - WNM-Sleep Mode
    - minimal BSS Transition Management processing
  * added autoscan module to control scanning behavior while not
    connected
    - autoscan_periodic and autoscan_exponential modules
  * added new WPS NFC ctrl_iface mechanism
    - added initial support NFC connection handover
    - removed obsoleted WPS_OOB command (including support for
      deprecated UFD config_method)
  * added optional framework for external password storage
    ("ext:<name>")
  * wpa_cli: added optional support for controlling wpa_supplicant
    remotely over UDP (CONFIG_CTRL_IFACE=udp-remote) for testing
    purposes
  * wpa_cli: extended tab completion to more commands
  * changed SSID output to use printf-escaped strings instead of
    masking of non-ASCII characters
    - SSID can now be configured in the same format:
      ssid=P"abc\x00test"
  * removed default ACM=1 from AC_VO and AC_VI
  * added optional "ht40" argument for P2P ctrl_iface commands to
    allow 40 MHz channels to be requested on the 5 GHz band
  * added optional parameters for p2p_invite command to specify
    channel when reinvoking a persistent group as the GO
  * improved FIPS mode builds with OpenSSL
    - "make fips" with CONFIG_FIPS=y to build wpa_supplicant with
      the OpenSSL FIPS object module
    - replace low level OpenSSL AES API calls to use EVP
    - use OpenSSL keying material exporter when possible
    - do not export TLS keys in FIPS mode
    - remove MD5 from CONFIG_FIPS=y builds
    - use OpenSSL function for PKBDF2 passphrase-to-PSK
    - use OpenSSL HMAC implementation
    - mix RAND_bytes() output into random_get_bytes() to force
      OpenSSL DRBG to be used in FIPS mode
    - use OpenSSL CMAC implementation
  * added mechanism to disable TLS Session Ticket extension
    - a workaround for servers that do not support TLS extensions
      that was enabled by default in recent OpenSSL versions
    - tls_disable_session_ticket=1
    - automatically disable TLS Session Ticket extension by default
      when using EAP-TLS/PEAP/TTLS (i.e., only use it with
      EAP-FAST)
  * changed VENDOR-TEST EAP method to use proper private
    enterprise number (this will not interoperate with older
    versions)
  * disable network block temporarily on authentication failures
  * improved WPS AP selection during WPS PIN iteration
  * added support for configuring GCMP cipher for IEEE 802.11ad
  * added support for Wi-Fi Display extensions
    - WFD_SUBELEMENT_SET ctrl_iface command to configure WFD
      subelements
    - SET wifi_display <0/1> to disable/enable WFD support
    - WFD service discovery
    - an external program is needed to manage the audio/video
      streaming and codecs
  * optimized scan result use for network selection
    - use the internal BSS table instead of raw scan results
    - allow unnecessary scans to be skipped if fresh information
      is available (e.g., after GAS/ANQP round for Interworking)
  * added support for 256-bit AES with internal TLS implementation
  * allow peer to propose channel in P2P invitation process for a
    persistent group
  * added disallow_aps parameter to allow BSSIDs/SSIDs to be
    disallowed from network selection
  * re-enable the networks disabled during WPS operations
  * allow P2P functionality to be disabled per interface
   (p2p_disabled=1)
  * added secondary device types into P2P_PEER output
  * added an option to disable use of a separate P2P group
    interface (p2p_no_group_iface=1)
  * fixed P2P Bonjour SD to match entries with both compressed and
    not compressed domain name format and support multiple Bonjour
    PTR matches for the same key
  * use deauthentication instead of disassociation for all
    disconnection operations; this removes the now unused
    disassociate() wpa_driver_ops callback
  * optimized PSK generation on P2P GO by caching results to avoid
    multiple PBKDF2 operations
  * added okc=1 global configuration parameter to allow OKC to be
    enabled by default for all network blocks
  * added a workaround for WPS PBC session overlap detection to
    avoid interop issues with deployed station implementations
    that do not remove active PBC indication from Probe Request
    frames properly
  * added basic support for 60 GHz band
  * extend EAPOL frames processing workaround for roaming cases
    (postpone processing of unexpected EAPOL frame until
     association event to handle reordered events)
- Drop upstreamed wpa_supplicant-libnl3.patch
- Disable obsolete Ralink driver

-------------------------------------------------------------------
Tue Dec 11 10:16:40 UTC 2012 - glin@suse.com

- Update to 1.1
  * Fix EAPOL supplicant port authorization with PMKSA caching.
  * Fix EAPOL processing when STA switches between multi-BSSes.
  * Fix EAP-FAST with OpenSSL 1.0.1.
  * EAP-pwd: Increase maximum number of hunting-and-pecking
    iterations, which results in less authentication attempts
    failing.
  * Set state to DISCONNECTED on AP creation errors. Previously the
    supplicant would stay in SCANNING state forever.
  * Fix REMOVE_NETWORK to not run operations with invalid
    current_ssid.
  * EAP-SIM peer: Fix AT_COUNTER_TOO_SMALL use.
  * Interworking: Fix PLMN matching with multiple entries to compare
    all entries, not just the first one.
  * Handle long configuration file lines more gracefully.
  * Fix adding extra IEs in sched scan.
  * PMKSA: Set cur_pmksa pointer during initial association.
  * PMKSA: Do not evict the active cache entry when adding new ones.
  * Set state consistently to DISCONNECTED on auth/assoc failures.
  * Fix BSSID enforcement with driver-based BSS selection. Set BSSID
    and channel when the network block has an explicit bssid
    parameter to select which BSS is to be used.
  * wpa_gui: Fix compilation with gcc/g++ 4.7.
  * EAP-AKA'
    - Update to RFC 5448 in the leading characters used in the
      username. This will make EAP-AKA' not interoperate between the
      earlier draft version and the new version.
    - Fix SIM/USIM determination to support EAP-AKA'.
  * dbus:
    - Add global capabilities property.
    - Fix bss_expire_count getter, which was returning the wrong
      value.
    - P2P: Remove network_object dictionary entry from signal
      GroupStarted.
    - Fix D-Bus build without ctrl_iface.
  * WPS:
    - Fix nonce comparisons to compare all bytes, not just the first
      byte.
    - Fix NFC password token building with WPS 2.0 to avoid wpabuf
      overflow and application abort if NFC out-of-band mechanism is
      used with WPS 2.0 enabled.
    - Fix cleanup of WPS operations (by clearing them) in
      WPA_SCANNING and WPA_DISCONNECTED states.
    - Fix issue with BSSID filter handling that could cause only a
      single one of the available BSSes to be available or could
      cause issues connecting.
    - Fix overlapping memcpy on WPS interface addition.
  * P2P:
    - Remove channel 14 from supported P2P channels.
    - Fix Provision Discovery retries on delay in off channel
      transmission, to avoid unnecessary retries.
    - Limit maximum number of stored P2P clients (the
      p2p_client_list parameter) to 100.
    - Improve p2p_client_list updates in configuration file,
      reording entries so that the most recently added values are
      maintained in the list if the list gets truncated due to
      size.
    - Fix Provision Discovery retries during p2p_find by making the
      p2p_find case behave consistently with the limited retry
      behavior used with Provision Discovery retries in the IDLE
      state.
    - Fix P2P Client Discoverability bit updates so that the bit is
      only updated based on P2P Group Info attribute from a GO.
    - Fix GO Negotiation race condition where both devices may
      believe they are the GO. (Ignore unexpected GO Neg Response
      if we have already sent GO Neg Response.)
    - Deinitialize global P2P context on P2P management interface
      removal.
    - Wait 100 ms if driver fails to start listen operation. This
      is a workaround for some drivers that may accept the
      remain-on-channel command, but instead of indicating start
      event for remain-on-channel, just indicate that the operation
      has been cancelled immediately.
    - Clone max_sta_num parameter for group interfaces, allowing
      this parameter set in the main config file to apply to
      dynamically created P2P group interfaces.
    - Fix Device ID matching for Probe Request frames, which was
      checking only the first octet of the P2P Device Address.
    - Do not update peer Listen channel based on PD Request
      Invitation Request frames (just on Probe Response frames).
    - Fix p2p_listen to disallow scheduling a new after scan
      operation in the case where a p2p_connect operation is
      pending.
- Remove upstreamed wpa_supplicant-gcc47.patch
- Enable background scan to improve roaming
- Build driver with libnl3 (wpa_supplicant-libnl3.patch)

-------------------------------------------------------------------
Tue May 15 04:35:01 UTC 2012 - glin@suse.com

- Update to 1.0
        * Delay STA entry removal until Deauth/Disassoc TX status
          in AP mode. This allows the driver to use PS buffering of
          Deauthentication and Disassociation frames when the STA
          is in power save sleep. Only available with drivers that
          provide TX status events for Deauth/Disassoc frames
          (nl80211).
        * Drop oldest unknown BSS table entries first. This makes
          it less likely to hit connection issues in environments
          with huge number of visible APs.
        * Add systemd support.
        * Add support for setting the syslog facility from the
          config file at build time.
        * atheros: Add support for IEEE 802.11w configuration.
        * AP mode: Allow enable HT20 if driver supports it, by
          setting the config parameter ieee80211n.
        * Allow AP mode to disconnect STAs based on low ACK
          condition (when the data connection is not working
          properly, e.g., due to the STA going outside the range
          of the AP).
        * nl80211:
         - Support GTK rekey offload.
         - Support PMKSA candidate events. This adds support for
           RSN pre-authentication with nl80211 interface and
           drivers that handle roaming internally.
        * Improved dbus interface
        * New wpa_cli commands to setup the scan interval and
          to support P2P and WPS/WPS ER
        * AP mode: Add max_num_sta config option, which can be used
          to limit the number of stations allowed to connect to the
          AP.
        * wext: Increase scan timeout from 5 to 10 seconds.
        * Allow an external program to manage the BSS blacklist
          and display its current contents.
        * WPS:
          - Add wpa_cli wps_pin get command for generating random
            PINs. This can be used in a UI to generate a PIN
            without starting WPS (or P2P) operation.
          - Set RF bands based on driver capabilities, instead of
            hardcoding them.
          - Add mechanism for indicating non-standard WPS errors.
          - Add wps_ap_pin cli command for wpa_supplicant AP mode.
          - Add wps_check_pin cli command for processing PIN from
            user input. UIs can use this command to process a PIN
            entered by a user and to validate the checksum digit
            (if present).
          - Cancel WPS operation on PBC session overlap detection.
          - New wps_cancel command in wpa_cli will cancel a
            pending WPS operation.
          - wpa_cli action: Add WPS_EVENT_SUCCESS and
            WPS_EVENT_FAIL handlers.
          - Trigger WPS config update on Manufacturer, Model Name,
            Model Number, and Serial Number changes.
          - Fragment size is now configurable for EAP-WSC peer.
            Use wpa_cli set wps_fragment_size <val>.
          - Disable AP PIN after 10 consecutive failures. Slow down
            attacks on failures up to 10.
          - Allow AP to start in Enrollee mode without AP PIN for
            probing, to be compatible with Windows 7.
          - Add Config Error into WPS-FAIL events to provide more
            info to the user on how to resolve the issue.
          - Label and Display config methods are not allowed to be
            enabled at the same time, since it is unclear which
            PIN to use if both methods are advertised.
          - When controlling multiple interfaces:
            - apply WPS commands to all interfaces configured to
              use WPS
            - apply WPS config changes to all interfaces that use
              WPS
            - when an attack is detected on any interface, disable
              AP PIN on all interfaces
        * WPS ER:
          - Add special AP Setup Locked mode to allow read only ER.
          - Show SetSelectedRegistrar events as ctrl_iface events
          - Add wps_er_set_config to enroll a network based on a
            local network configuration block instead of having to
            (re-)learn the current AP settings with wps_er_learn.
          - Allow AP filtering based on IP address, add ctrl_iface
            event for learned AP settings, add wps_er_config
            command to configure an AP.
        * Add support for WPS 2.0
        * TDLS:
          - Propogate TDLS related nl80211 capability flags from
            kernel and add them as driver capability flags. If the
            driver doesn't support capabilities, assume TDLS is
            supported internally. When TDLS is explicitly not
            supported, disable all user facing TDLS operations.
          - Allow TDLS to be disabled at runtime.
          - Honor AP TDLS settings that prohibit/allow TDLS.
          - Add a special testing feature for changing TDLS
            behavior.
          - Add support for TDLS 802.11z.
        * wlantest: Add a tool wlantest for IEEE802.11 protocol
          testing. wlantest can be used to capture frames from a
          monitor interface for realtime capturing or from pcap
          files for offline analysis.
        * bgscan learn: Add new bgscan that learns BSS information
          based on previous scans, and uses that information to
          dynamically generate the list of channels for background
          scans.
        * Add a new debug message level for excessive information.
        * TLS: Add support for tls_disable_time_checks=1 in client
          mode.
        * Improved internal TLS
        * Add RFKill support by adding an interface state
          "disabled".
        * Reorder some IEs to get closer to IEEE 802.11 standard.
          Move WMM into end of Beacon, Probe Resp and (Re)Assoc
          Resp frames. Move HT IEs to be later in (Re)Assoc Resp.
        * Wi-Fi Direct support

- Remove wpa_supplicant-dbus-events.patch (merged upstream)
- Remove wpa_supplicant-probed-cert-dbus-signal.patch (merged
  upstream)

-------------------------------------------------------------------
Sat Mar 17 22:30:51 UTC 2012 - dimstar@opensuse.org

- Add wpa_supplicant-gcc47.patch: Fix build with gcc 4.7.

-------------------------------------------------------------------
Tue Jan 10 08:08:15 UTC 2012 - glin@suse.com

- Add wpa_supplicant-probed-cert-dbus-signal.patch to emit a D-Bus
  signal when the AP returned the certificate of the RADIUS server
  (bnc#574266)

-------------------------------------------------------------------
Mon Oct 10 13:28:43 UTC 2011 - lnussel@suse.de

- use same exec line in fi.w1.wpa_supplicant1.service as in
  fi.epitest.hostap.WPASupplicant.service
- fix build on older distros
- fix not using RPM_OPT_FLAGS
- use %_smp_mflags

-------------------------------------------------------------------
Fri Sep 16 12:02:37 UTC 2011 - jengelh@medozas.de

- Select libnl-1_1-devel

-------------------------------------------------------------------
Wed Aug 31 13:46:53 CEST 2011 - vbotka@suse.de

- %ghost directive for /var/run/wpa_supplicant added for tmpfs
  (bnc 710281)

-------------------------------------------------------------------
Wed Mar 16 21:22:58 UTC 2011 - dimstar@opensuse.org

- Add wpa_supplicant-dbus-events.patch: Emit property changed
  events when adding/removing BSSes. Required by NetworkManager
  0.9 beta1 and later.
- Also install fi.w1.wpa_supplicant1.service, which was added as
  source5, sourced from the wpa_supplicant source code, with
  modified exec line pointing to /usr/sbin instead of /sbin.

-------------------------------------------------------------------
Tue Sep  7 23:08:14 CEST 2010 - vbotka@suse.de

- update to 0.7.3
        * fixed fallback from failed PMKSA caching into full EAP authentication
          [Bug 355]
        * fixed issue with early D-Bus signals during initialization
        * fixed X.509 name handling in internal TLS
        * fixed WPS ER to use corrent Enrollee MAC Address in Credential
        * fixed scanning routines ot improve AP selection for WPS
        * added WPS workaround for open networks
        * fixed WPS Diffie-Hellman derivation to use correct public key length
        * fixed wpa_supplicant AP mode operations to ignore Supplicant and
          scan result events
        * improved SME operations with nl80211
        * fixed WPS ER event_id handling in some cases
        * fixed some issues with bgscan simple to avoid unnecessary scans
        * fixed issue with l2_packet_ndis overlapped writes corrupting stack
          [Bug 328]
        * updated WinPcap to the latest stable version 4.1.2 in Windows
          installer

update to 0.7.2
        * nl80211: fixed number of issues with roaming
        * avoid unnecessary roaming if multiple APs with similar signal
          strength are present in scan results
        * add TLS client events and server probing to ease design of
          automatic detection of EAP parameters
        * add option for server certificate matching (SHA256 hash of the
          certificate) instead of trusted CA certificate configuration
        * bsd: Cleaned up driver wrapper and added various low-level
          configuration options
        * wpa_gui-qt4: do not show too frequent WPS AP available events as
          tray messages
        * TNC: fixed issues with fragmentation
        * EAP-TNC: add Flags field into fragment acknowledgement (needed to
          interoperate with other implementations; may potentially breaks
          compatibility with older wpa_supplicant/hostapd versions)
        * wpa_cli: added option for using a separate process to receive event
          messages to reduce latency in showing these
          (CFLAGS += -DCONFIG_WPA_CLI_FORK=y in .config to enable this)
        * maximum BSS table size can now be configured (bss_max_count)
        * BSSes to be included in the BSS table can be filtered based on
          configured SSIDs to save memory (filter_ssids)
        * fix number of issues with IEEE 802.11r/FT; this version is not
          backwards compatible with old versions
        * nl80211: add support for IEEE 802.11r/FT protocol (both over-the-air
          and over-the-DS)
        * add freq_list network configuration parameter to allow the AP
          selection to filter out entries based on the operating channel
        * add signal strength change events for bgscan; this allows more
          dynamic changes to background scanning interval based on changes in
          the signal strength with the current AP; this improves roaming within
          ESS quite a bit, e.g., with bgscan="simple:30:-45:300" in the network
          configuration block to request background scans less frequently when
          signal strength remains good and to automatically trigger background
          scans whenever signal strength drops noticeably
          (this is currently only available with nl80211)
        * add BSSID and reason code (if available) to disconnect event messages
        * wpa_gui-qt4: more complete support for translating the GUI with
          linguist and add German translation
        * fix DH padding with internal crypto code (mainly, for WPS)
        * do not trigger initial scan automatically anymore if there are no
          enabled networks

-------------------------------------------------------------------
Fri May 28 12:49:53 CEST 2010 - vbotka@suse.de

-  Fix fallback from failed PMKSA caching into full EAP authentication
   (bnc 601501)

-------------------------------------------------------------------
Sun Jan 31 13:13:46 UTC 2010 - aj@suse.de

- Update to 0.7.1 (full changelog in wpa_supplicant/ChangeLog):
  * Cleanup of interfaces
  * dbus: added new DBus interface (fi.w1.wpa_supplicant1)
  * driver_nl80211: multiple updates to provide support for new Linux
    nl80211/mac80211 functionality
- Remove wpa_supplicant-dbus-iface-segfault-fix.patch, does not apply
  at all.
- Remove wpa_supplicant-dbus-reset-eapol.patch (merged upstream).
- Disable patches that do not apply anymore but are not merged.

-------------------------------------------------------------------
Mon Sep 28 08:44:02 UTC 2009 - lnussel@suse.de

- simplify dbus config, allow introspection

-------------------------------------------------------------------
Mon Sep  7 19:41:35 UTC 2009 - claes.backstrom@fsfe.org

- Added rotation of log file with logrotate (bnc#508041)

-------------------------------------------------------------------
Tue May 12 12:28:55 CEST 2009 - dmueller@suse.de

- reenable logfile writing support to make d-bus activation work
  again (bnc#502957)

-------------------------------------------------------------------
Tue Apr  7 13:02:49 CEST 2009 - hschaa@suse.de

- Enable ralink driver (bnc#481380)
- Enable nl80211 driver (bnc#485453)
- Rebase all SUSE patches to 0.6.9
- Remove upstreamed patches
- Update to 0.6.9
	* driver_ndis: add PAE group address to the multicast address list to
	  fix wired IEEE 802.1X authentication
	* fixed IEEE 802.11r key derivation function to match with the standard
	  (note: this breaks interoperability with previous version) [Bug 303]
	* increased wpa_cli ping interval to 5 seconds and made this
	  configurable with a new command line options (-G<seconds>)
	* fixed scan buffer processing with WEXT to handle up to 65535
	  byte result buffer (previously, limited to 32768 bytes)
	* added support for Wi-Fi Protected Setup (WPS)
	  (wpa_supplicant can now be configured to act as a WPS Enrollee to
	  enroll credentials for a network using PIN and PBC methods; in
	  addition, wpa_supplicant can act as a wireless WPS Registrar to
	  configure an AP); WPS support can be enabled by adding CONFIG_WPS=y
	  into .config and setting the runtime configuration variables in
	  wpa_supplicant.conf (see WPS section in the example configuration
	  file); new wpa_cli commands wps_pin, wps_pbc, and wps_reg are used to
	  manage WPS negotiation; see README-WPS for more details
	* added support for EAP-AKA' (draft-arkko-eap-aka-kdf)
	* added support for using driver_test over UDP socket
	* fixed PEAPv0 Cryptobinding interoperability issue with Windows Server
	  2008 NPS; optional cryptobinding is now enabled (again) by default
	* fixed PSK editing in wpa_gui
	* changed EAP-GPSK to use the IANA assigned EAP method type 51
	* added a Windows installer that includes WinPcap and all the needed
	  DLLs; in addition, it set up the registry automatically so that user
	  will only need start wpa_gui to get prompted to start the wpasvc
	  servide and add a new interface if needed through wpa_gui dialog
	* updated management frame protection to use IEEE 802.11w/D7.0
	* added Milenage SIM/USIM emulator for EAP-SIM/EAP-AKA
	  (can be used to simulate test SIM/USIM card with a known private key;
	  enable with CONFIG_SIM_SIMULATOR=y/CONFIG_USIM_SIMULATOR=y in .config
	  and password="Ki:OPc"/password="Ki:OPc:SQN" in network configuration)
	* added a new network configuration option, wpa_ptk_rekey, that can be
	  used to enforce frequent PTK rekeying, e.g., to mitigate some attacks
	  against TKIP deficiencies
	* added an optional mitigation mechanism for certain attacks against
	  TKIP by delaying Michael MIC error reports by a random amount of time
	  between 0 and 60 seconds; this can be enabled with a build option
	  CONFIG_DELAYED_MIC_ERROR_REPORT=y in .config
	* fixed EAP-AKA to use RES Length field in AT_RES as length in bits,
	  not bytes
	* updated OpenSSL code for EAP-FAST to use an updated version of the
	  session ticket overriding API that was included into the upstream
	  OpenSSL 0.9.9 tree on 2008-11-15 (no additional OpenSSL patch is
	  needed with that version anymore)
	* updated userspace MLME instructions to match with the current Linux
	  mac80211 implementation; please also note that this can only be used
	  with driver_nl80211.c (the old code from driver_wext.c was removed)
	* added support (Linux only) for RoboSwitch chipsets (often found in
	  consumer grade routers); driver interface 'roboswitch'
	* fixed canceling of PMKSA caching when using drivers that generate
	  RSN IE and refuse to drop PMKIDs that wpa_supplicant does not know
	  about
	* added support for SHA-256 as X.509 certificate digest when using the
	  internal X.509/TLSv1 implementation
	* updated management frame protection to use IEEE 802.11w/D6.0
	* added support for using SHA256-based stronger key derivation for WPA2
	  (IEEE 802.11w)
	* fixed FT (IEEE 802.11r) authentication after a failed association to
	  use correct FTIE
	* added support for configuring Phase 2 (inner/tunneled) authentication
	  method with wpa_gui-qt4
	* added support for EAP Sequences in EAP-FAST Phase 2
	* added support for using TNC with EAP-FAST
	* added driver_ps3 for the PS3 Linux wireless driver
	* added support for optional cryptobinding with PEAPv0
	* fixed the OpenSSL patches (0.9.8g and 0.9.9) for EAP-FAST to
	  allow fallback to full handshake if server rejects PAC-Opaque
	* added fragmentation support for EAP-TNC
	* added support for parsing PKCS #8 formatted private keys into the
	  internal TLS implementation (both PKCS #1 RSA key and PKCS #8
	  encapsulated RSA key can now be used)
	* added option of using faster, but larger, routines in the internal
	  LibTomMath (for internal TLS implementation) to speed up DH and RSA
	  calculations (CONFIG_INTERNAL_LIBTOMMATH_FAST=y)
	* fixed race condition between disassociation event and group key
	  handshake to avoid getting stuck in incorrect state [Bug 261]
	* fixed opportunistic key caching (proactive_key_caching)

-------------------------------------------------------------------
Sun Mar  1 17:03:04 CET 2009 - coolo@suse.de

- fix compilation with gcc 4.4

-------------------------------------------------------------------
Mon Feb  9 16:06:44 CET 2009 - hschaa@suse.de

- Add wpa_supplicant-respect_no_reply.patch which avoids
  D-Bus errors if no reply was requested by the caller

-------------------------------------------------------------------
Wed Jan 28 14:03:42 CET 2009 - hschaa@suse.de

- Avoid unnecessary roaming if the driver (like ipw2100) does not
  report signal level. This fixes association problems with ipw2100
  (bnc#469779).

-------------------------------------------------------------------
Wed Jan 28 10:45:19 CET 2009 - hschaa@suse.de

- Fix dbus configuration again (bnc#470013, bnc#469530)

-------------------------------------------------------------------
Thu Jan 22 17:24:34 CET 2009 - hschaa@suse.de

- Add fix_dbus_config.patch (bnc#468392)

-------------------------------------------------------------------
Mon Dec  8 15:45:55 CET 2008 - hschaa@suse.de

- Add patch wpa_supplicant-hide_secrets-2.patch to _not_ print
  passwords in clear text when started by NM with enabled debug
  output

-------------------------------------------------------------------
Mon Nov 10 17:35:43 EET 2008 - tambet@novell.com

- Fix a bug where authentication would always fail using PKCS#11
  interface from DBus control interface.
- Add support for PKCS#11 module initialization arguments.

-------------------------------------------------------------------
Mon Oct 13 15:11:54 CEST 2008 - hschaa@gmail.com

- update wpa_supplicant-roaming.patch which enables roaming by
  default for some cards

-------------------------------------------------------------------
Thu Oct  9 14:42:36 CEST 2008 - hschaa@suse.de

- add patches wpa_supplicant-dont_report_empty_initial_scan.patch
	and wpa_supplicant-restore_scan_request_setting.patch which
	speed up the initial association with a network when NM is used
- Add patch wpa_supplicant-fix_set_mode.patch which fixes an
	association bug that was triggered when changing the interface
	mode

-------------------------------------------------------------------
Mon Sep 29 13:40:18 CEST 2008 - hschaa@suse.de

- add roaming capability (FATE 303806)

-------------------------------------------------------------------
Wed Sep 24 00:59:56 CEST 2008 - ro@suse.de

- drop buildreq for madwifi (dropped package)

-------------------------------------------------------------------
Tue Sep  2 03:05:49 CEST 2008 - ro@suse.de

- update to 0.6.4
        * added support for EAP Sequences in EAP-FAST Phase 2
        * added support for using TNC with EAP-FAST
        * added driver_ps3 for the PS3 Linux wireless driver
        * added support for optional cryptobinding with PEAPv0
        * fixed the OpenSSL patches (0.9.8g and 0.9.9) for EAP-FAST to
          allow fallback to full handshake if server rejects PAC-Opaque
        * added fragmentation support for EAP-TNC
        * added support for parsing PKCS #8 formatted private keys into the
          internal TLS implementation (both PKCS #1 RSA key and PKCS #8
          encapsulated RSA key can now be used)
        * added option of using faster, but larger, routines in the internal
          LibTomMath (for internal TLS implementation) to speed up DH and RSA
          calculations (CONFIG_INTERNAL_LIBTOMMATH_FAST=y)
        * fixed race condition between disassociation event and group key
          handshake to avoid getting stuck in incorrect state [Bug 261]
        * fixed opportunistic key caching (proactive_key_caching)

-------------------------------------------------------------------
Mon Aug  4 12:33:10 CEST 2008 - hschaa@suse.de

- Remove patches that are already upstream
- Rebase patches to new version
- Update to 0.6.3

-------------------------------------------------------------------
Mon May  5 09:52:45 CEST 2008 - schwab@suse.de

- Fix mangled error message.

-------------------------------------------------------------------
Mon Mar 17 15:06:14 CET 2008 - hschaa@suse.de

- Fix system bus activation (bnc#371500)

-------------------------------------------------------------------
Tue Mar 11 15:09:29 CET 2008 - hschaa@suse.de

- Remove patches that are upstream already
- Update to version 0.5.10, changes:
	* added support for Makefile builds to include debug-log-to-a-file
	  functionality (CONFIG_DEBUG_FILE=y and -f<path> on command line)
	* added network configuration parameter 'frequency' for setting
	  initial channel for IBSS (adhoc) networks
	* fixed EAP-SIM and EAP-AKA message parser to validate attribute
	  lengths properly to avoid potential crash caused by invalid messages
	* added driver_wext workaround for race condition between scanning and
	  association with drivers that take very long time to scan all
	  channels (e.g., madwifi with dual-band cards); wpa_supplicant is now
	  using a longer hardcoded timeout for the scan if the driver supports
	  notifications for scan completion (SIOCGIWSCAN event); this helps,
	  e.g., in cases where wpa_supplicant and madwifi driver ended up in
	  loop where the driver did not even try to associate
	* fixed EAP-SIM not to include AT_NONCE_MT and AT_SELECTED_VERSION
	  attributes in EAP-SIM Start/Response when using fast reauthentication
	* fixed problems in getting NDIS events from WMI on Windows 2000
- Changes in 0.5.9:
	* fixed an integer overflow issue in the ASN.1 parser used by the
	  (experimental) internal TLS implementation to avoid a potential
	  buffer read overflow
	* fixed a race condition with -W option (wait for a control interface
	  monitor before starting) that could have caused the first messages to
	  be lost
	* updated EAP Generalized Pre-Shared Key (EAP-GPSK) to use the latest
	  draft (draft-ietf-emu-eap-gpsk-07.txt)
	* added ctrl_iface RECONNECT (wpa_cli reconnect) command
	  (like reassociate, but only takes effect if already associated)
	* fixed a possible race condition between wpa_cli reassociate and
	  wpa_cli disconnect
	* return a non-zero exit code from non-interactive wpa_cli if the
	  command is not recognized or fails
	* fixed 0.5.8 regressions in BSS selection that prevented wildcard SSID
	  from being used with non-WPA networks and disabled workaround for
	  ignoring bogus WPA/RSN IE in non-WPA configuration
	* fixed OpenSSL TLS wrapper to clear trusted CA list to allow
	  network blocks to use different trusted CA configurations
	* fixed a potential EAP state machine loop when mloving from PSK to EAP
	  configuration without restarting wpa_supplicant

-------------------------------------------------------------------
Thu Jan 31 13:10:43 CET 2008 - hschaa@suse.de

- Fix madwifi support (b.n.c #342670)

-------------------------------------------------------------------
Tue Dec 18 18:26:27 CET 2007 - jg@suse.de

- Fix two leaks when signalling state and scan results (rh #408141)

-------------------------------------------------------------------
Wed Nov 14 13:36:33 CET 2007 - jg@suse.de

- enable dbus interface
- apply fixes from Dan Williams
- build Qt4 version of wpa_gui
- dropped gcc 4.3 patch for Qt3 wpa_gui

-------------------------------------------------------------------
Mon Nov 12 14:24:33 CET 2007 - ssommer@suse.de

- fix build with gcc 4.3

-------------------------------------------------------------------
Tue Jul 24 16:58:12 CEST 2007 - jg@suse.de

- update to version 0.5.8, changes:
  * updated driver_wext.c to build with the current wireless-dev.git
    tree and net/d80211 changes
  * updated EAP Generalized Pre-Shared Key (EAP-GPSK) to use the latest
    draft (draft-ietf-emu-eap-gpsk-03.txt)
  * fixed 'make install'
  * fixed EAP-TTLS implementation not to crash on use of freed memory
    if TLS library initialization fails
  * fixed EAP-AKA Notification processing to allow Notification to be
    processed after AKA Challenge response has been sent

-------------------------------------------------------------------
Mon Mar 19 19:33:34 CET 2007 - jg@suse.de

- adjusted include path for madwifi

-------------------------------------------------------------------
Sat Mar 10 17:44:46 CET 2007 - dmueller@suse.de

- update to 0.5.7 (#253396):
  * ChangeLog is under /usr/share/doc/packages/wpa_supplicant/ChangeLog

-------------------------------------------------------------------
Mon Nov  6 16:29:14 CET 2006 - jg@suse.de

- set IW_ENCODE_TEMP flag (needed to use dynamic WEP with airo
  driver, bug 185528)

-------------------------------------------------------------------
Fri Oct  6 11:52:37 CEST 2006 - jg@suse.de

- update to 0.4.9:
  * fixed EAPOL re-authentication for sessions that used PMKSA
    caching
  * reject WPA/WPA2 message 3/4 if it does not include any valid
    WPA/RSN IE
  * driver_wext: added support for WE-21 change to SSID configuration
  * driver_wext: fixed privacy configuration for static WEP keys mode
    [Bug 140]
  * driver_wext: added fallback to use SIOCSIWENCODE for setting
    auth_alg if the driver does not support SIOCSIWAUTH

-------------------------------------------------------------------
Fri Mar 24 19:08:20 CET 2006 - jg@suse.de

- fixed static WEP key usage (bug 144268)

-------------------------------------------------------------------
Thu Feb 16 10:04:31 CET 2006 - jg@suse.de

- update to 0.4.8 (bug 151151)
  * added support for EAP-FAST key derivation using other ciphers than
    RC4-128-SHA for authentication and AES128-SHA for provisioning
  * fixed EAP-SIM and EAP-AKA pseudonym and fast re-authentication to
    decrypt AT_ENCR_DATA attributes correctly
  * added support for configuring CA certificate as DER file and as a
    configuration blob
  * fixed private key configuration as configuration blob and added
    support for using PKCS#12 as a blob
  * added support for loading trusted CA certificates from Windows
    certificate store: ca_cert="cert_store://<name>", where <name> is
    likely CA (Intermediate CA certificates) or ROOT (root certificates)
  * fixed TLS library deinitialization after RSN pre-authentication not
    to disable TLS library for normal authentication
  * fixed PMKSA cache processing not to trigger deauthentication if the
    current PMKSA cache entry is replaced with a valid new entry
  * fixed PC/SC initialization for ap_scan != 1 modes (this fixes
    EAP-SIM and EAP-AKA with real SIM/USIM card when using ap_scan=0 or
    ap_scan=2)
  * do not try to use USIM APDUs when initializing PC/SC for SIM card
    access for a network that has not enabled EAP-AKA

-------------------------------------------------------------------
Sun Feb  5 18:34:21 CET 2006 - ro@suse.de

- removed km_wlan from BuildRequires

-------------------------------------------------------------------
Wed Jan 25 21:42:51 CET 2006 - mls@suse.de

- converted neededforbuild to BuildRequires

-------------------------------------------------------------------
Tue Jan 17 19:32:07 CET 2006 - rml@suse.de

- Add patch (from upstream) fixing bad drivers that NULL out
  the SSID and send the wrong length.

-------------------------------------------------------------------
Tue Jan 10 12:27:27 CET 2006 - jg@suse.de

- added AP scan mode selection via control interface (patch
  from rml@novell.com)

-------------------------------------------------------------------
Mon Nov 21 12:41:52 CET 2005 - jg@suse.de

- update to 0.4.7, changes (shortened):
  * l2_packet_pcap: fixed wired IEEE 802.1X authentication with
    libpcap and WinPcap to receive frames sent to PAE group address
  * disable EAP state machine when IEEE 802.1X authentication is
    not used in order to get rid of bogus "EAP failed" messages
  * fixed OpenSSL error reporting to go through all pending errors
    to avoid confusing reports of old errors being reported at
    later point during handshake
  * fixed configuration file updating to not write empty variables
    (e.g., proto or key_mgmt) that the file parser would not accept
  * fixed ADD_NETWORK ctrl_iface command to use the same default
    values for variables as empty network definitions read from
    config file would get
  * fixed EAP state machine to not discard EAP-Failure messages in
    many cases (e.g., during TLS handshake)
  * fixed a infinite loop in private key reading if the configured
    file cannot be parsed successfully
  * driver_madwifi: added support for madwifi-ng
  * wpa_gui: do not display password/PSK field contents
  * wpa_gui: added CA certificate configuration
  * use longer timeout for IEEE 802.11 association to avoid problems
    with drivers that may take more than five second to associate
- dropped obsolete madwifi patch
- dropped obsolete copy of wireless.h
- updated config file
- use $RPM_OPT_FLAGS and %jobs
- created subpackage wpa_supplicant-gui containing wpa_gui

-------------------------------------------------------------------
Tue Nov  8 15:22:13 CET 2005 - jg@suse.de

- do not build as root

-------------------------------------------------------------------
Fri Nov  4 18:16:50 CET 2005 - jg@suse.de

- added support for madwifi-ng
- compiling against Wireless Extensions v19
- removed obsolete config option CONFIG_XSUPPLICANT_IFACE

-------------------------------------------------------------------
Fri Oct 28 12:25:59 CEST 2005 - jg@suse.de

- update to 0.4.6, changes (shortened):
  * allow fallback to WPA, if mixed WPA+WPA2 networks have mismatch
    in RSN IE, but WPA IE would match with wpa_supplicant
    configuration
  * added support for named configuration blobs in order to avoid
    having to use file system for external files (e.g., certificates)
  * fixed RSN pre-authentication
  * driver_madwifi: set IEEE80211_KEY_GROUP flag for group keys to
    make sure the driver configures broadcast decryption correctly
  * added ca_path (and ca_path2) configuration variables that can be
    used to configure OpenSSL CA path, e.g., /etc/ssl/certs, for
    using the system-wide trusted CA list
  * added support for starting wpa_supplicant without a configuration
    file
  * added global control interface that can be optionally used for
    adding and removing network interfaces dynamically
  * wpa_gui:
    - try to save configuration whenever something is modified
    - added WEP key configuration
    - added possibility to edit the current network configuration
  * driver_ndis: fixed driver polling not to increase frequency on
    each received EAPOL frame due to incorrectly cancelled timeout
  * fixed driver_wext.c to filter wireless events based on ifindex
    to avoid interfaces receiving events from other interfaces
  * delay sending initial EAPOL-Start couple of seconds to speed
    up authentication for the most common case of Authenticator
    starting EAP authentication immediately after association

-------------------------------------------------------------------
Thu Oct 13 16:40:44 CEST 2005 - jg@suse.de

- update to 0.4.5, changes (shortened):
  * added a workaround for clearing keys with ndiswrapper to allow
    roaming from WPA enabled AP to plaintext one
  * l2_packet_linux: use socket type SOCK_DGRAM instead of SOCK_RAW
    for PF_PACKET in order to prepare for network devices that do
    not use Ethernet headers (e.g., network stack with native IEEE
    802.11 frames)
  * use receipt of EAPOL-Key frame as a lower layer success indication
    for EAP state machine to allow recovery from dropped EAP-Success
    frame
  * driver_wext: add support for WE-19
  * added support for multiple configuration backends (CONFIG_BACKEND
    option); currently, only 'file' is supported (i.e., the format used
    in wpa_supplicant.conf)
  * added support for updating configuration ('wpa_cli save_config')
  * added GET_NETWORK ctrl_iface command

-------------------------------------------------------------------
Mon Aug 29 15:26:27 CEST 2005 - jg@suse.de

- update to 0.4.4 (bug 112977), changes (shortened):
  * replaced OpenSSL patch for EAP-FAST support
    (openssl-tls-extensions.patch) with a more generic and correct
    patch
  * allow non-WPA modes (e.g., IEEE 802.1X with dynamic WEP) to be
    used with drivers that do not support WPA
  * added support for enabling/disabling networks from the list of
    all configured networks
  * added support for adding and removing network from the current
    configuration
  * added support for setting network configuration parameters
    through the control interface
  * fixed parsing of strings that include both " and # within double
    quoted area (e.g., "start"#end")
  * removed interface for external EAPOL/EAP supplicant
  * fixed build with CONFIG_DNET_PCAP=y on Linux
  * l2_packet: moved different implementations into separate files
  * added support for using ap_scan=2 mode with multiple network
    blocks
  * fixed a potential issue in RSN pre-authentication ending up using
    freed memory if pre-authentication times out
  * added support for querying private key password (EAP-TLS) through
    the control interface (wpa_cli/wpa_gui) if one is not included in
    the configuration file
  * driver_broadcom: fixed couple of memory leaks in scan result
    processing
  * EAP-PAX is now registered as EAP type 46
  * fixed EAP-PAX MAC calculation
  * fixed EAP-PAX CK and ICK key derivation
  * added support for using password with EAP-PAX
  * added support for arbitrary driver interface parameters through the
    configuration file with a new driver_param field
  * added possibility to override l2_packet module with driver
    interface API (new send_eapol handler)
  * fixed ctrl_interface_group processing for the case where gid is
    entered as a number, not group name
  * driver_test: added support for testing hostapd with wpa_supplicant
    by using test driver interface without any kernel drivers or
    network cards
  * added support for EAP-MSCHAPv2 password retries within the same
    EAP authentication session
  * added support for password changes with EAP-MSCHAPv2
  * added support for reading additional certificates from PKCS#12
    files and adding them to the certificate chain
  * fixed association with IEEE 802.1X (no WPA) when dynamic WEP keys
    were used
  * display EAP Notification messages to user through control
    interface with "CTRL-EVENT-EAP-NOTIFICATION" prefix
  * added 'disconnect' command to control interface for setting
    wpa_supplicant in state where it will not associate before
    'reassociate' command has been used
  * added support for getting scan results through control interface
  * added support for wired authentication (IEEE 802.1X on wired
    Ethernet); driver interface 'wired'
  * added support for sending TLS alerts
  * added support for 'any' SSID wildcard; if ssid is not configured or
    is set to an empty string, any SSID will be accepted for non-WPA AP
  * added support for asking PIN (for SIM) from frontends (e.g.,
    wpa_cli);
  * added support for using external devices (e.g., a smartcard) for
    private key operations in EAP-TLS (CONFIG_SMARTCARD=y in .config);
  * added experimental support for EAP-PAX
  * added monitor mode for wpa_cli

-------------------------------------------------------------------
Mon Jul 11 15:46:53 CEST 2005 - jg@suse.de

- update to 0.3.9, changes:
  * modified the EAP workaround that accepts EAP-Success with
    incorrect Identifier to be even less strict about verification
    in order to interoperate with some authentication servers
  * fixed RSN IE in 4-Way Handshake message 2/4 for the case where
    Authenticator rejects PMKSA caching attempt and the driver is
    not using assoc_info events
  * fixed a possible double free in EAP-TTLS fast-reauthentication
    when identity or password is entered through control interface
  * added -P<pid file> argument for wpa_supplicant to write the
    current process id into a file
  * driver_madwifi: fixed association in plaintext mode
  * driver_madwifi: added preliminary support for compiling against
    'BSD' branch of madwifi CVS tree
  * added EAP workaround for PEAPv1 session resumption: allow outer,
    i.e., not tunneled, EAP-Success to terminate session since; this
    can be disabled with eap_workaround=0
  * driver_ipw: updated driver structures to match with ipw2200-1.0.4
    (note: ipw2100-1.1.0 is likely to require an update to work with
    this)
  * driver_broadcom: fixed couple of memory leaks in scan result
    processing
- removed pidfile patch in favour of the new upstream
  implementation

-------------------------------------------------------------------
Mon Mar 21 11:36:26 CET 2005 - jg@suse.de

- creating directory /var/run/wpa_supplicant when needed (bug 74023)

-------------------------------------------------------------------
Mon Feb 14 09:58:59 CET 2005 - jg@suse.de

- update to 0.3.8, changes:
  * fixed EAPOL-Key validation to drop packets with invalid Key
    Data Length; such frames could have crashed wpa_supplicant due
    to buffer overflow

-------------------------------------------------------------------
Mon Feb  7 17:00:37 CET 2005 - jg@suse.de

- update to 0.3.7-pre, changes:
  * fixed WPA/RSN IE verification in message 3 of 4-Way Handshake
    when using drivers that take care of AP selection (e.g., when
    using ap_scan=2)
  * fixed reprocessing of pending request after ctrl_iface requests
    for identity/password/otp
  * fixed ctrl_iface requests for identity/password/otp in Phase 2
    of EAP-PEAP and EAP-TTLS
  * all drivers using driver_wext: set interface up and select
    Managed mode when starting wpa_supplicant; set interface down
    when exiting
  * renamed driver_ipw2100.c to driver_ipw.c since it now supports
    both ipw2100 and ipw2200
  * fixed a busy loop introduced in v0.3.5 for scan result
    processing when no matching AP is found
  * added a workaround for an interoperability issue with a Cisco AP
    when using WPA2-PSK
  * fixed non-WPA IEEE 802.1X to use the same authentication timeout
    as WPA with IEEE 802.1X
  * fixed issues with 64-bit CPUs and SHA1 cleanup in previous
    version (e.g., segfault when processing EAPOL-Key frames)
  * fixed EAP workaround and fast reauthentication configuration for
    RSN pre-authentication
  * added support for blacklisting APs that fail or timeout
    authentication in ap_scan=1 mode so that all APs are tried in
    cases where the ones with strongest signal level are failing
    authentication
  * fixed CA certificate loading after a failed EAP-TLS/PEAP/TTLS
    authentication attempt
  * added preliminary support for IBSS (ad-hoc) mode configuration
  * added optional support for GNU Readline and History Libraries
    for wpa_cli (CONFIG_READLINE)
  * added couple of workarounds for interoperability issues with a
    Cisco AP when using WPA2
  * fixed private key loading for cases where passphrase is not set
  * improved recovery from PMKID mismatches by requesting full EAP
    authentication in case of failed PMKSA caching attempt
  * driver_ndis: added support for NDIS NdisMIncidateStatus() events
  * driver_ndis: use ADD_WEP/REMOVE_WEP when configuring WEP keys
  * added support for driver interfaces to replace the interface
    name based on driver/OS specific mapping, e.g., in case of
    driver_ndis, this allows the beginning of the adapter
    description to be used as the interface name
  * driver_ndis: enable radio before starting scanning, disable
    radio when exiting
  * added KEY_MGMT_802_1X_NO_WPA as a new key_mgmt type so that
    driver interface can distinguish plaintext and IEEE 802.1X
    (no WPA) authentication
  * fixed static WEP key configuration to use broadcast/default type
    for all keys
  * driver_ndis: added legacy WPA capability detection for non-WPA2
    drivers
  * added support for setting static WEP keys for IEEE 802.1X
    without dynamic WEP keying (eapol_flags=0)
  * added support for reading PKCS#12 (PFX) files (as a replacement
    for PEM/DER) to get certificate and private key (CONFIG_PKCS12)
  * added new ap_scan mode, ap_scan=2, for drivers that take care of
    association, but need to be configured with security policy and
    SSID, e.g., ndiswrapper and NDIS driver

-------------------------------------------------------------------
Thu Jan 13 12:32:51 CET 2005 - jg@suse.de

- update to 0.2.6, changes:
  * added driver interface for Intel ipw2100 driver
  * fixed a bug in PMKSA cache processing: skip sending of
    EAPOL-Start only if there is a PMKSA cache entry for the
    current AP
  * fixed error handling for case where reading of scan results
    fails: must schedule a new scan or wpa_supplicant will remain
    waiting forever
  * set pairwise/group cipher suite for non-WPA IEEE 802.1X to
    WEP-104 if keys are not configured to be used; this fixes
    IEEE 802.1X mode with drivers that use this information to
    configure whether Privacy bit can be in Beacon frames
    (e.g., ndiswrapper)
  * improved downgrade attack detection in IE verification of
    msg 3/4: verify both WPA and RSN IEs, if present, not only the
    selected one; reject the AP if an RSN IE is found in msg 3/4,
    but not in Beacon or Probe Response frame, and RSN is enabled in
    wpa_supplicant configuration
  * fixed WPA msg 3/4 processing to allow Key Data field contain
    other IEs than just one WPA IE
  * modified association event handler to set portEnabled = FALSE
    before clearing port Valid in order to reset EAP state machine
    and avoid problems with new authentication getting ignored because
    of state machines ending up in AUTHENTICATED/SUCCESS state based
    on old information
- removed obsolete ipw2100 patch
- added wpa_supplicant.fig to filelist

-------------------------------------------------------------------
Fri Oct 22 12:47:44 CEST 2004 - jg@suse.de

- update to 0.2.5, changes:
  * wpa_cli: fixed parsing of -p <path> command line argument
  * fixed parsing of wep_tx_keyidx
  * fixed couple of errors in PCSC handling that could have caused
    random-looking errors for EAP-SIM
  * PEAPv1: fixed tunneled EAP-Success reply handling to reply with
    TLS ACK, not tunneled EAP-Success
  * PEAPv1: added support for terminating PEAP authentication on
    tunneled EAP-Success message
  * PEAPv1: changed phase1 option peaplabel to use default to 0, i.e.,
    to the old label for key derivation; previously, the default was 1,
    but it looks like most existing PEAPv1 implementations use the old
    label which is thus more suitable default option
  * changed SSID configuration in driver_wext.c (used by many driver
    interfaces) to use ssid_len+1 as the length for SSID since some
    Linux drivers expect this
  * fixed couple of unaligned reads in scan result parsing to fix WPA
    connection on some platforms (e.g., ARM)
- disabled madwifi support on ppc

-------------------------------------------------------------------
Wed Sep 29 00:36:22 CEST 2004 - jg@suse.de

- added support for ipw2100 driver

-------------------------------------------------------------------
Tue Aug 31 16:57:27 CEST 2004 - jg@suse.de

- added support for writing pid-file

-------------------------------------------------------------------
Mon Aug  2 18:52:39 CEST 2004 - jg@suse.de

- fixed build on non-x86 platforms

-------------------------------------------------------------------
Mon Aug  2 17:35:57 CEST 2004 - jg@suse.de

- update to version 0.2.4, important changes:
  - support for new EAP authentication methods:
    EAP-TTLS/EAP-MD5-Challenge
    EAP-TTLS/EAP-GTC
    EAP-TTLS/EAP-MSCHAPv2
    EAP-TTLS/EAP-TLS
    EAP-TTLS/MSCHAPv2
    EAP-TTLS/MSCHAP
    EAP-TTLS/PAP
    EAP-TTLS/CHAP
    EAP-PEAP/TLS
    EAP-PEAP/GTC
    EAP-PEAP/MD5-Challenge
    EAP-GTC
    EAP-TTLS/EAP-OTP, EAP-PEAPv0/OTP, EAP-PEAPv1/OTP, EAP-OTP
  - support for ATMEL AT76C5XXX driver
  - support for madwifi driver
  - lots of minor changes, see ChangeLog
- added km_wlan to needforbuild (driver source of madwifi is
  needed)

-------------------------------------------------------------------
Thu Jun 17 14:40:13 CEST 2004 - jg@suse.de

- Initial package

Places

File wpa_supplicant.changes of Package wpa_supplicant (Revision 696496c23c87f13be90da8b0ab4085f2)

Places