File wpa_supplicant.changes of Package wpa_supplicant

Overview Repositories Revisions Requests Users Attributes Meta

File wpa_supplicant.changes of Package wpa_supplicant (Revision e0b64d64ed93c803a1754a25ddf69435)

Currently displaying revision e0b64d64ed93c803a1754a25ddf69435 , Show latest

-------------------------------------------------------------------
Mon Sep 28 08:44:02 UTC 2009 - lnussel@suse.de

- simplify dbus config, allow introspection

-------------------------------------------------------------------
Mon Sep  7 19:41:35 UTC 2009 - claes.backstrom@fsfe.org

- Added rotation of log file with logrotate (bnc#508041)

-------------------------------------------------------------------
Tue May 12 12:28:55 CEST 2009 - dmueller@suse.de

- reenable logfile writing support to make d-bus activation work
  again (bnc#502957)

-------------------------------------------------------------------
Tue Apr  7 13:02:49 CEST 2009 - hschaa@suse.de

- Enable ralink driver (bnc#481380)
- Enable nl80211 driver (bnc#485453)
- Rebase all SUSE patches to 0.6.9
- Remove upstreamed patches
- Update to 0.6.9
	* driver_ndis: add PAE group address to the multicast address list to
	  fix wired IEEE 802.1X authentication
	* fixed IEEE 802.11r key derivation function to match with the standard
	  (note: this breaks interoperability with previous version) [Bug 303]
	* increased wpa_cli ping interval to 5 seconds and made this
	  configurable with a new command line options (-G<seconds>)
	* fixed scan buffer processing with WEXT to handle up to 65535
	  byte result buffer (previously, limited to 32768 bytes)
	* added support for Wi-Fi Protected Setup (WPS)
	  (wpa_supplicant can now be configured to act as a WPS Enrollee to
	  enroll credentials for a network using PIN and PBC methods; in
	  addition, wpa_supplicant can act as a wireless WPS Registrar to
	  configure an AP); WPS support can be enabled by adding CONFIG_WPS=y
	  into .config and setting the runtime configuration variables in
	  wpa_supplicant.conf (see WPS section in the example configuration
	  file); new wpa_cli commands wps_pin, wps_pbc, and wps_reg are used to
	  manage WPS negotiation; see README-WPS for more details
	* added support for EAP-AKA' (draft-arkko-eap-aka-kdf)
	* added support for using driver_test over UDP socket
	* fixed PEAPv0 Cryptobinding interoperability issue with Windows Server
	  2008 NPS; optional cryptobinding is now enabled (again) by default
	* fixed PSK editing in wpa_gui
	* changed EAP-GPSK to use the IANA assigned EAP method type 51
	* added a Windows installer that includes WinPcap and all the needed
	  DLLs; in addition, it set up the registry automatically so that user
	  will only need start wpa_gui to get prompted to start the wpasvc
	  servide and add a new interface if needed through wpa_gui dialog
	* updated management frame protection to use IEEE 802.11w/D7.0
	* added Milenage SIM/USIM emulator for EAP-SIM/EAP-AKA
	  (can be used to simulate test SIM/USIM card with a known private key;
	  enable with CONFIG_SIM_SIMULATOR=y/CONFIG_USIM_SIMULATOR=y in .config
	  and password="Ki:OPc"/password="Ki:OPc:SQN" in network configuration)
	* added a new network configuration option, wpa_ptk_rekey, that can be
	  used to enforce frequent PTK rekeying, e.g., to mitigate some attacks
	  against TKIP deficiencies
	* added an optional mitigation mechanism for certain attacks against
	  TKIP by delaying Michael MIC error reports by a random amount of time
	  between 0 and 60 seconds; this can be enabled with a build option
	  CONFIG_DELAYED_MIC_ERROR_REPORT=y in .config
	* fixed EAP-AKA to use RES Length field in AT_RES as length in bits,
	  not bytes
	* updated OpenSSL code for EAP-FAST to use an updated version of the
	  session ticket overriding API that was included into the upstream
	  OpenSSL 0.9.9 tree on 2008-11-15 (no additional OpenSSL patch is
	  needed with that version anymore)
	* updated userspace MLME instructions to match with the current Linux
	  mac80211 implementation; please also note that this can only be used
	  with driver_nl80211.c (the old code from driver_wext.c was removed)
	* added support (Linux only) for RoboSwitch chipsets (often found in
	  consumer grade routers); driver interface 'roboswitch'
	* fixed canceling of PMKSA caching when using drivers that generate
	  RSN IE and refuse to drop PMKIDs that wpa_supplicant does not know
	  about
	* added support for SHA-256 as X.509 certificate digest when using the
	  internal X.509/TLSv1 implementation
	* updated management frame protection to use IEEE 802.11w/D6.0
	* added support for using SHA256-based stronger key derivation for WPA2
	  (IEEE 802.11w)
	* fixed FT (IEEE 802.11r) authentication after a failed association to
	  use correct FTIE
	* added support for configuring Phase 2 (inner/tunneled) authentication
	  method with wpa_gui-qt4
	* added support for EAP Sequences in EAP-FAST Phase 2
	* added support for using TNC with EAP-FAST
	* added driver_ps3 for the PS3 Linux wireless driver
	* added support for optional cryptobinding with PEAPv0
	* fixed the OpenSSL patches (0.9.8g and 0.9.9) for EAP-FAST to
	  allow fallback to full handshake if server rejects PAC-Opaque
	* added fragmentation support for EAP-TNC
	* added support for parsing PKCS #8 formatted private keys into the
	  internal TLS implementation (both PKCS #1 RSA key and PKCS #8
	  encapsulated RSA key can now be used)
	* added option of using faster, but larger, routines in the internal
	  LibTomMath (for internal TLS implementation) to speed up DH and RSA
	  calculations (CONFIG_INTERNAL_LIBTOMMATH_FAST=y)
	* fixed race condition between disassociation event and group key
	  handshake to avoid getting stuck in incorrect state [Bug 261]
	* fixed opportunistic key caching (proactive_key_caching)

-------------------------------------------------------------------
Sun Mar  1 17:03:04 CET 2009 - coolo@suse.de

- fix compilation with gcc 4.4

-------------------------------------------------------------------
Mon Feb  9 16:06:44 CET 2009 - hschaa@suse.de

- Add wpa_supplicant-respect_no_reply.patch which avoids
  D-Bus errors if no reply was requested by the caller

-------------------------------------------------------------------
Wed Jan 28 14:03:42 CET 2009 - hschaa@suse.de

- Avoid unnecessary roaming if the driver (like ipw2100) does not
  report signal level. This fixes association problems with ipw2100
  (bnc#469779).

-------------------------------------------------------------------
Wed Jan 28 10:45:19 CET 2009 - hschaa@suse.de

- Fix dbus configuration again (bnc#470013, bnc#469530)

-------------------------------------------------------------------
Thu Jan 22 17:24:34 CET 2009 - hschaa@suse.de

- Add fix_dbus_config.patch (bnc#468392)

-------------------------------------------------------------------
Mon Dec  8 15:45:55 CET 2008 - hschaa@suse.de

- Add patch wpa_supplicant-hide_secrets-2.patch to _not_ print
  passwords in clear text when started by NM with enabled debug
  output

-------------------------------------------------------------------
Mon Nov 10 17:35:43 EET 2008 - tambet@novell.com

- Fix a bug where authentication would always fail using PKCS#11
  interface from DBus control interface.
- Add support for PKCS#11 module initialization arguments.

-------------------------------------------------------------------
Mon Oct 13 15:11:54 CEST 2008 - hschaa@gmail.com

- update wpa_supplicant-roaming.patch which enables roaming by
  default for some cards

-------------------------------------------------------------------
Thu Oct  9 14:42:36 CEST 2008 - hschaa@suse.de

- add patches wpa_supplicant-dont_report_empty_initial_scan.patch
	and wpa_supplicant-restore_scan_request_setting.patch which
	speed up the initial association with a network when NM is used
- Add patch wpa_supplicant-fix_set_mode.patch which fixes an
	association bug that was triggered when changing the interface
	mode

-------------------------------------------------------------------
Mon Sep 29 13:40:18 CEST 2008 - hschaa@suse.de

- add roaming capability (FATE 303806)

-------------------------------------------------------------------
Wed Sep 24 00:59:56 CEST 2008 - ro@suse.de

- drop buildreq for madwifi (dropped package)

-------------------------------------------------------------------
Tue Sep  2 03:05:49 CEST 2008 - ro@suse.de

- update to 0.6.4
        * added support for EAP Sequences in EAP-FAST Phase 2
        * added support for using TNC with EAP-FAST
        * added driver_ps3 for the PS3 Linux wireless driver
        * added support for optional cryptobinding with PEAPv0
        * fixed the OpenSSL patches (0.9.8g and 0.9.9) for EAP-FAST to
          allow fallback to full handshake if server rejects PAC-Opaque
        * added fragmentation support for EAP-TNC
        * added support for parsing PKCS #8 formatted private keys into the
          internal TLS implementation (both PKCS #1 RSA key and PKCS #8
          encapsulated RSA key can now be used)
        * added option of using faster, but larger, routines in the internal
          LibTomMath (for internal TLS implementation) to speed up DH and RSA
          calculations (CONFIG_INTERNAL_LIBTOMMATH_FAST=y)
        * fixed race condition between disassociation event and group key
          handshake to avoid getting stuck in incorrect state [Bug 261]
        * fixed opportunistic key caching (proactive_key_caching)

-------------------------------------------------------------------
Mon Aug  4 12:33:10 CEST 2008 - hschaa@suse.de

- Remove patches that are already upstream
- Rebase patches to new version
- Update to 0.6.3

-------------------------------------------------------------------
Mon May  5 09:52:45 CEST 2008 - schwab@suse.de

- Fix mangled error message.

-------------------------------------------------------------------
Mon Mar 17 15:06:14 CET 2008 - hschaa@suse.de

- Fix system bus activation (bnc#371500)

-------------------------------------------------------------------
Tue Mar 11 15:09:29 CET 2008 - hschaa@suse.de

- Remove patches that are upstream already
- Update to version 0.5.10, changes:
	* added support for Makefile builds to include debug-log-to-a-file
	  functionality (CONFIG_DEBUG_FILE=y and -f<path> on command line)
	* added network configuration parameter 'frequency' for setting
	  initial channel for IBSS (adhoc) networks
	* fixed EAP-SIM and EAP-AKA message parser to validate attribute
	  lengths properly to avoid potential crash caused by invalid messages
	* added driver_wext workaround for race condition between scanning and
	  association with drivers that take very long time to scan all
	  channels (e.g., madwifi with dual-band cards); wpa_supplicant is now
	  using a longer hardcoded timeout for the scan if the driver supports
	  notifications for scan completion (SIOCGIWSCAN event); this helps,
	  e.g., in cases where wpa_supplicant and madwifi driver ended up in
	  loop where the driver did not even try to associate
	* fixed EAP-SIM not to include AT_NONCE_MT and AT_SELECTED_VERSION
	  attributes in EAP-SIM Start/Response when using fast reauthentication
	* fixed problems in getting NDIS events from WMI on Windows 2000
- Changes in 0.5.9:
	* fixed an integer overflow issue in the ASN.1 parser used by the
	  (experimental) internal TLS implementation to avoid a potential
	  buffer read overflow
	* fixed a race condition with -W option (wait for a control interface
	  monitor before starting) that could have caused the first messages to
	  be lost
	* updated EAP Generalized Pre-Shared Key (EAP-GPSK) to use the latest
	  draft (draft-ietf-emu-eap-gpsk-07.txt)
	* added ctrl_iface RECONNECT (wpa_cli reconnect) command
	  (like reassociate, but only takes effect if already associated)
	* fixed a possible race condition between wpa_cli reassociate and
	  wpa_cli disconnect
	* return a non-zero exit code from non-interactive wpa_cli if the
	  command is not recognized or fails
	* fixed 0.5.8 regressions in BSS selection that prevented wildcard SSID
	  from being used with non-WPA networks and disabled workaround for
	  ignoring bogus WPA/RSN IE in non-WPA configuration
	* fixed OpenSSL TLS wrapper to clear trusted CA list to allow
	  network blocks to use different trusted CA configurations
	* fixed a potential EAP state machine loop when mloving from PSK to EAP
	  configuration without restarting wpa_supplicant

-------------------------------------------------------------------
Thu Jan 31 13:10:43 CET 2008 - hschaa@suse.de

- Fix madwifi support (b.n.c #342670)

-------------------------------------------------------------------
Tue Dec 18 18:26:27 CET 2007 - jg@suse.de

- Fix two leaks when signalling state and scan results (rh #408141)

-------------------------------------------------------------------
Wed Nov 14 13:36:33 CET 2007 - jg@suse.de

- enable dbus interface
- apply fixes from Dan Williams
- build Qt4 version of wpa_gui
- dropped gcc 4.3 patch for Qt3 wpa_gui

-------------------------------------------------------------------
Mon Nov 12 14:24:33 CET 2007 - ssommer@suse.de

- fix build with gcc 4.3

-------------------------------------------------------------------
Tue Jul 24 16:58:12 CEST 2007 - jg@suse.de

- update to version 0.5.8, changes:
  * updated driver_wext.c to build with the current wireless-dev.git
    tree and net/d80211 changes
  * updated EAP Generalized Pre-Shared Key (EAP-GPSK) to use the latest
    draft (draft-ietf-emu-eap-gpsk-03.txt)
  * fixed 'make install'
  * fixed EAP-TTLS implementation not to crash on use of freed memory
    if TLS library initialization fails
  * fixed EAP-AKA Notification processing to allow Notification to be
    processed after AKA Challenge response has been sent

-------------------------------------------------------------------
Mon Mar 19 19:33:34 CET 2007 - jg@suse.de

- adjusted include path for madwifi

-------------------------------------------------------------------
Sat Mar 10 17:44:46 CET 2007 - dmueller@suse.de

- update to 0.5.7 (#253396):
  * ChangeLog is under /usr/share/doc/packages/wpa_supplicant/ChangeLog

-------------------------------------------------------------------
Mon Nov  6 16:29:14 CET 2006 - jg@suse.de

- set IW_ENCODE_TEMP flag (needed to use dynamic WEP with airo
  driver, bug 185528)

-------------------------------------------------------------------
Fri Oct  6 11:52:37 CEST 2006 - jg@suse.de

- update to 0.4.9:
  * fixed EAPOL re-authentication for sessions that used PMKSA
    caching
  * reject WPA/WPA2 message 3/4 if it does not include any valid
    WPA/RSN IE
  * driver_wext: added support for WE-21 change to SSID configuration
  * driver_wext: fixed privacy configuration for static WEP keys mode
    [Bug 140]
  * driver_wext: added fallback to use SIOCSIWENCODE for setting
    auth_alg if the driver does not support SIOCSIWAUTH

-------------------------------------------------------------------
Fri Mar 24 19:08:20 CET 2006 - jg@suse.de

- fixed static WEP key usage (bug 144268)

-------------------------------------------------------------------
Thu Feb 16 10:04:31 CET 2006 - jg@suse.de

- update to 0.4.8 (bug 151151)
  * added support for EAP-FAST key derivation using other ciphers than
    RC4-128-SHA for authentication and AES128-SHA for provisioning
  * fixed EAP-SIM and EAP-AKA pseudonym and fast re-authentication to
    decrypt AT_ENCR_DATA attributes correctly
  * added support for configuring CA certificate as DER file and as a
    configuration blob
  * fixed private key configuration as configuration blob and added
    support for using PKCS#12 as a blob
  * added support for loading trusted CA certificates from Windows
    certificate store: ca_cert="cert_store://<name>", where <name> is
    likely CA (Intermediate CA certificates) or ROOT (root certificates)
  * fixed TLS library deinitialization after RSN pre-authentication not
    to disable TLS library for normal authentication
  * fixed PMKSA cache processing not to trigger deauthentication if the
    current PMKSA cache entry is replaced with a valid new entry
  * fixed PC/SC initialization for ap_scan != 1 modes (this fixes
    EAP-SIM and EAP-AKA with real SIM/USIM card when using ap_scan=0 or
    ap_scan=2)
  * do not try to use USIM APDUs when initializing PC/SC for SIM card
    access for a network that has not enabled EAP-AKA

-------------------------------------------------------------------
Sun Feb  5 18:34:21 CET 2006 - ro@suse.de

- removed km_wlan from BuildRequires

-------------------------------------------------------------------
Wed Jan 25 21:42:51 CET 2006 - mls@suse.de

- converted neededforbuild to BuildRequires

-------------------------------------------------------------------
Tue Jan 17 19:32:07 CET 2006 - rml@suse.de

- Add patch (from upstream) fixing bad drivers that NULL out
  the SSID and send the wrong length.

-------------------------------------------------------------------
Tue Jan 10 12:27:27 CET 2006 - jg@suse.de

- added AP scan mode selection via control interface (patch
  from rml@novell.com)

-------------------------------------------------------------------
Mon Nov 21 12:41:52 CET 2005 - jg@suse.de

- update to 0.4.7, changes (shortened):
  * l2_packet_pcap: fixed wired IEEE 802.1X authentication with
    libpcap and WinPcap to receive frames sent to PAE group address
  * disable EAP state machine when IEEE 802.1X authentication is
    not used in order to get rid of bogus "EAP failed" messages
  * fixed OpenSSL error reporting to go through all pending errors
    to avoid confusing reports of old errors being reported at
    later point during handshake
  * fixed configuration file updating to not write empty variables
    (e.g., proto or key_mgmt) that the file parser would not accept
  * fixed ADD_NETWORK ctrl_iface command to use the same default
    values for variables as empty network definitions read from
    config file would get
  * fixed EAP state machine to not discard EAP-Failure messages in
    many cases (e.g., during TLS handshake)
  * fixed a infinite loop in private key reading if the configured
    file cannot be parsed successfully
  * driver_madwifi: added support for madwifi-ng
  * wpa_gui: do not display password/PSK field contents
  * wpa_gui: added CA certificate configuration
  * use longer timeout for IEEE 802.11 association to avoid problems
    with drivers that may take more than five second to associate
- dropped obsolete madwifi patch
- dropped obsolete copy of wireless.h
- updated config file
- use $RPM_OPT_FLAGS and %jobs
- created subpackage wpa_supplicant-gui containing wpa_gui

-------------------------------------------------------------------
Tue Nov  8 15:22:13 CET 2005 - jg@suse.de

- do not build as root

-------------------------------------------------------------------
Fri Nov  4 18:16:50 CET 2005 - jg@suse.de

- added support for madwifi-ng
- compiling against Wireless Extensions v19
- removed obsolete config option CONFIG_XSUPPLICANT_IFACE

-------------------------------------------------------------------
Fri Oct 28 12:25:59 CEST 2005 - jg@suse.de

- update to 0.4.6, changes (shortened):
  * allow fallback to WPA, if mixed WPA+WPA2 networks have mismatch
    in RSN IE, but WPA IE would match with wpa_supplicant
    configuration
  * added support for named configuration blobs in order to avoid
    having to use file system for external files (e.g., certificates)
  * fixed RSN pre-authentication
  * driver_madwifi: set IEEE80211_KEY_GROUP flag for group keys to
    make sure the driver configures broadcast decryption correctly
  * added ca_path (and ca_path2) configuration variables that can be
    used to configure OpenSSL CA path, e.g., /etc/ssl/certs, for
    using the system-wide trusted CA list
  * added support for starting wpa_supplicant without a configuration
    file
  * added global control interface that can be optionally used for
    adding and removing network interfaces dynamically
  * wpa_gui:
    - try to save configuration whenever something is modified
    - added WEP key configuration
    - added possibility to edit the current network configuration
  * driver_ndis: fixed driver polling not to increase frequency on
    each received EAPOL frame due to incorrectly cancelled timeout
  * fixed driver_wext.c to filter wireless events based on ifindex
    to avoid interfaces receiving events from other interfaces
  * delay sending initial EAPOL-Start couple of seconds to speed
    up authentication for the most common case of Authenticator
    starting EAP authentication immediately after association

-------------------------------------------------------------------
Thu Oct 13 16:40:44 CEST 2005 - jg@suse.de

- update to 0.4.5, changes (shortened):
  * added a workaround for clearing keys with ndiswrapper to allow
    roaming from WPA enabled AP to plaintext one
  * l2_packet_linux: use socket type SOCK_DGRAM instead of SOCK_RAW
    for PF_PACKET in order to prepare for network devices that do
    not use Ethernet headers (e.g., network stack with native IEEE
    802.11 frames)
  * use receipt of EAPOL-Key frame as a lower layer success indication
    for EAP state machine to allow recovery from dropped EAP-Success
    frame
  * driver_wext: add support for WE-19
  * added support for multiple configuration backends (CONFIG_BACKEND
    option); currently, only 'file' is supported (i.e., the format used
    in wpa_supplicant.conf)
  * added support for updating configuration ('wpa_cli save_config')
  * added GET_NETWORK ctrl_iface command

-------------------------------------------------------------------
Mon Aug 29 15:26:27 CEST 2005 - jg@suse.de

- update to 0.4.4 (bug 112977), changes (shortened):
  * replaced OpenSSL patch for EAP-FAST support
    (openssl-tls-extensions.patch) with a more generic and correct
    patch
  * allow non-WPA modes (e.g., IEEE 802.1X with dynamic WEP) to be
    used with drivers that do not support WPA
  * added support for enabling/disabling networks from the list of
    all configured networks
  * added support for adding and removing network from the current
    configuration
  * added support for setting network configuration parameters
    through the control interface
  * fixed parsing of strings that include both " and # within double
    quoted area (e.g., "start"#end")
  * removed interface for external EAPOL/EAP supplicant
  * fixed build with CONFIG_DNET_PCAP=y on Linux
  * l2_packet: moved different implementations into separate files
  * added support for using ap_scan=2 mode with multiple network
    blocks
  * fixed a potential issue in RSN pre-authentication ending up using
    freed memory if pre-authentication times out
  * added support for querying private key password (EAP-TLS) through
    the control interface (wpa_cli/wpa_gui) if one is not included in
    the configuration file
  * driver_broadcom: fixed couple of memory leaks in scan result
    processing
  * EAP-PAX is now registered as EAP type 46
  * fixed EAP-PAX MAC calculation
  * fixed EAP-PAX CK and ICK key derivation
  * added support for using password with EAP-PAX
  * added support for arbitrary driver interface parameters through the
    configuration file with a new driver_param field
  * added possibility to override l2_packet module with driver
    interface API (new send_eapol handler)
  * fixed ctrl_interface_group processing for the case where gid is
    entered as a number, not group name
  * driver_test: added support for testing hostapd with wpa_supplicant
    by using test driver interface without any kernel drivers or
    network cards
  * added support for EAP-MSCHAPv2 password retries within the same
    EAP authentication session
  * added support for password changes with EAP-MSCHAPv2
  * added support for reading additional certificates from PKCS#12
    files and adding them to the certificate chain
  * fixed association with IEEE 802.1X (no WPA) when dynamic WEP keys
    were used
  * display EAP Notification messages to user through control
    interface with "CTRL-EVENT-EAP-NOTIFICATION" prefix
  * added 'disconnect' command to control interface for setting
    wpa_supplicant in state where it will not associate before
    'reassociate' command has been used
  * added support for getting scan results through control interface
  * added support for wired authentication (IEEE 802.1X on wired
    Ethernet); driver interface 'wired'
  * added support for sending TLS alerts
  * added support for 'any' SSID wildcard; if ssid is not configured or
    is set to an empty string, any SSID will be accepted for non-WPA AP
  * added support for asking PIN (for SIM) from frontends (e.g.,
    wpa_cli);
  * added support for using external devices (e.g., a smartcard) for
    private key operations in EAP-TLS (CONFIG_SMARTCARD=y in .config);
  * added experimental support for EAP-PAX
  * added monitor mode for wpa_cli

-------------------------------------------------------------------
Mon Jul 11 15:46:53 CEST 2005 - jg@suse.de

- update to 0.3.9, changes:
  * modified the EAP workaround that accepts EAP-Success with
    incorrect Identifier to be even less strict about verification
    in order to interoperate with some authentication servers
  * fixed RSN IE in 4-Way Handshake message 2/4 for the case where
    Authenticator rejects PMKSA caching attempt and the driver is
    not using assoc_info events
  * fixed a possible double free in EAP-TTLS fast-reauthentication
    when identity or password is entered through control interface
  * added -P<pid file> argument for wpa_supplicant to write the
    current process id into a file
  * driver_madwifi: fixed association in plaintext mode
  * driver_madwifi: added preliminary support for compiling against
    'BSD' branch of madwifi CVS tree
  * added EAP workaround for PEAPv1 session resumption: allow outer,
    i.e., not tunneled, EAP-Success to terminate session since; this
    can be disabled with eap_workaround=0
  * driver_ipw: updated driver structures to match with ipw2200-1.0.4
    (note: ipw2100-1.1.0 is likely to require an update to work with
    this)
  * driver_broadcom: fixed couple of memory leaks in scan result
    processing
- removed pidfile patch in favour of the new upstream
  implementation

-------------------------------------------------------------------
Mon Mar 21 11:36:26 CET 2005 - jg@suse.de

- creating directory /var/run/wpa_supplicant when needed (bug 74023)

-------------------------------------------------------------------
Mon Feb 14 09:58:59 CET 2005 - jg@suse.de

- update to 0.3.8, changes:
  * fixed EAPOL-Key validation to drop packets with invalid Key
    Data Length; such frames could have crashed wpa_supplicant due
    to buffer overflow

-------------------------------------------------------------------
Mon Feb  7 17:00:37 CET 2005 - jg@suse.de

- update to 0.3.7-pre, changes:
  * fixed WPA/RSN IE verification in message 3 of 4-Way Handshake
    when using drivers that take care of AP selection (e.g., when
    using ap_scan=2)
  * fixed reprocessing of pending request after ctrl_iface requests
    for identity/password/otp
  * fixed ctrl_iface requests for identity/password/otp in Phase 2
    of EAP-PEAP and EAP-TTLS
  * all drivers using driver_wext: set interface up and select
    Managed mode when starting wpa_supplicant; set interface down
    when exiting
  * renamed driver_ipw2100.c to driver_ipw.c since it now supports
    both ipw2100 and ipw2200
  * fixed a busy loop introduced in v0.3.5 for scan result
    processing when no matching AP is found
  * added a workaround for an interoperability issue with a Cisco AP
    when using WPA2-PSK
  * fixed non-WPA IEEE 802.1X to use the same authentication timeout
    as WPA with IEEE 802.1X
  * fixed issues with 64-bit CPUs and SHA1 cleanup in previous
    version (e.g., segfault when processing EAPOL-Key frames)
  * fixed EAP workaround and fast reauthentication configuration for
    RSN pre-authentication
  * added support for blacklisting APs that fail or timeout
    authentication in ap_scan=1 mode so that all APs are tried in
    cases where the ones with strongest signal level are failing
    authentication
  * fixed CA certificate loading after a failed EAP-TLS/PEAP/TTLS
    authentication attempt
  * added preliminary support for IBSS (ad-hoc) mode configuration
  * added optional support for GNU Readline and History Libraries
    for wpa_cli (CONFIG_READLINE)
  * added couple of workarounds for interoperability issues with a
    Cisco AP when using WPA2
  * fixed private key loading for cases where passphrase is not set
  * improved recovery from PMKID mismatches by requesting full EAP
    authentication in case of failed PMKSA caching attempt
  * driver_ndis: added support for NDIS NdisMIncidateStatus() events
  * driver_ndis: use ADD_WEP/REMOVE_WEP when configuring WEP keys
  * added support for driver interfaces to replace the interface
    name based on driver/OS specific mapping, e.g., in case of
    driver_ndis, this allows the beginning of the adapter
    description to be used as the interface name
  * driver_ndis: enable radio before starting scanning, disable
    radio when exiting
  * added KEY_MGMT_802_1X_NO_WPA as a new key_mgmt type so that
    driver interface can distinguish plaintext and IEEE 802.1X
    (no WPA) authentication
  * fixed static WEP key configuration to use broadcast/default type
    for all keys
  * driver_ndis: added legacy WPA capability detection for non-WPA2
    drivers
  * added support for setting static WEP keys for IEEE 802.1X
    without dynamic WEP keying (eapol_flags=0)
  * added support for reading PKCS#12 (PFX) files (as a replacement
    for PEM/DER) to get certificate and private key (CONFIG_PKCS12)
  * added new ap_scan mode, ap_scan=2, for drivers that take care of
    association, but need to be configured with security policy and
    SSID, e.g., ndiswrapper and NDIS driver

-------------------------------------------------------------------
Thu Jan 13 12:32:51 CET 2005 - jg@suse.de

- update to 0.2.6, changes:
  * added driver interface for Intel ipw2100 driver
  * fixed a bug in PMKSA cache processing: skip sending of
    EAPOL-Start only if there is a PMKSA cache entry for the
    current AP
  * fixed error handling for case where reading of scan results
    fails: must schedule a new scan or wpa_supplicant will remain
    waiting forever
  * set pairwise/group cipher suite for non-WPA IEEE 802.1X to
    WEP-104 if keys are not configured to be used; this fixes
    IEEE 802.1X mode with drivers that use this information to
    configure whether Privacy bit can be in Beacon frames
    (e.g., ndiswrapper)
  * improved downgrade attack detection in IE verification of
    msg 3/4: verify both WPA and RSN IEs, if present, not only the
    selected one; reject the AP if an RSN IE is found in msg 3/4,
    but not in Beacon or Probe Response frame, and RSN is enabled in
    wpa_supplicant configuration
  * fixed WPA msg 3/4 processing to allow Key Data field contain
    other IEs than just one WPA IE
  * modified association event handler to set portEnabled = FALSE
    before clearing port Valid in order to reset EAP state machine
    and avoid problems with new authentication getting ignored because
    of state machines ending up in AUTHENTICATED/SUCCESS state based
    on old information
- removed obsolete ipw2100 patch
- added wpa_supplicant.fig to filelist

-------------------------------------------------------------------
Fri Oct 22 12:47:44 CEST 2004 - jg@suse.de

- update to 0.2.5, changes:
  * wpa_cli: fixed parsing of -p <path> command line argument
  * fixed parsing of wep_tx_keyidx
  * fixed couple of errors in PCSC handling that could have caused
    random-looking errors for EAP-SIM
  * PEAPv1: fixed tunneled EAP-Success reply handling to reply with
    TLS ACK, not tunneled EAP-Success
  * PEAPv1: added support for terminating PEAP authentication on
    tunneled EAP-Success message
  * PEAPv1: changed phase1 option peaplabel to use default to 0, i.e.,
    to the old label for key derivation; previously, the default was 1,
    but it looks like most existing PEAPv1 implementations use the old
    label which is thus more suitable default option
  * changed SSID configuration in driver_wext.c (used by many driver
    interfaces) to use ssid_len+1 as the length for SSID since some
    Linux drivers expect this
  * fixed couple of unaligned reads in scan result parsing to fix WPA
    connection on some platforms (e.g., ARM)
- disabled madwifi support on ppc

-------------------------------------------------------------------
Wed Sep 29 00:36:22 CEST 2004 - jg@suse.de

- added support for ipw2100 driver

-------------------------------------------------------------------
Tue Aug 31 16:57:27 CEST 2004 - jg@suse.de

- added support for writing pid-file

-------------------------------------------------------------------
Mon Aug  2 18:52:39 CEST 2004 - jg@suse.de

- fixed build on non-x86 platforms

-------------------------------------------------------------------
Mon Aug  2 17:35:57 CEST 2004 - jg@suse.de

- update to version 0.2.4, important changes:
  - support for new EAP authentication methods:
    EAP-TTLS/EAP-MD5-Challenge
    EAP-TTLS/EAP-GTC
    EAP-TTLS/EAP-MSCHAPv2
    EAP-TTLS/EAP-TLS
    EAP-TTLS/MSCHAPv2
    EAP-TTLS/MSCHAP
    EAP-TTLS/PAP
    EAP-TTLS/CHAP
    EAP-PEAP/TLS
    EAP-PEAP/GTC
    EAP-PEAP/MD5-Challenge
    EAP-GTC
    EAP-TTLS/EAP-OTP, EAP-PEAPv0/OTP, EAP-PEAPv1/OTP, EAP-OTP
  - support for ATMEL AT76C5XXX driver
  - support for madwifi driver
  - lots of minor changes, see ChangeLog
- added km_wlan to needforbuild (driver source of madwifi is
  needed)

-------------------------------------------------------------------
Thu Jun 17 14:40:13 CEST 2004 - jg@suse.de

- Initial package

Places

File wpa_supplicant.changes of Package wpa_supplicant (Revision e0b64d64ed93c803a1754a25ddf69435)

Places