File apcupsd.changes of Package apcupsd

Overview Repositories Revisions Requests Users Attributes Meta

File apcupsd.changes of Package apcupsd

-------------------------------------------------------------------
Mon Jul 13 12:33:03 UTC 2015 - tchvatal@suse.com

- Ensure locfile is properly set bnc#929444

-------------------------------------------------------------------
Sat Apr 18 11:45:54 UTC 2015 - matwey.kornilov@gmail.com

- Move *.cgi scripts to apcupsd-cgi package (fix boo#925886)

-------------------------------------------------------------------
Thu Apr  2 07:26:12 UTC 2015 - tchvatal@suse.com

- Version bumpt o 3.13.13:
  * apcaccess and apcupsd status format updates to ease parsing by scripts
  * UPS name is included in subject line of emails in default scripts
  * Default event scripts pull SYSADMIN and APCUPSD_MAIL definitions from a
    common config file so they can easily be configured in one place
  * MODBUS USB support
    Previous releases supported MODBUS serial (RS232). This release adds
    support for MODBUS over USB. This protocol is preferable to the normal
    USB HID driver because it offers access to more UPS data readouts and
    controls. The only configuration file change needed versus MODBUS serial
    is to change UPSCABLE to usb and use an empty DEVICE setting. See the 
    MODBUS section of the apcupsd manual for more details.
  * Support for Apple Notification Center on Mac OS X (replaces Growl)
  * Apple install packages and binaries are signed with an Apple Developer
    key for compatibility with Gate Keeper
  * Windows USB driver has been updated with additional USB identifiers to
    support future APC products.
  * Fix issue with certain Back-UPS USB models repeatedly cycling power on/off 
    after killpower is issued
  * Fix display of battery level during MODBUS calibration
  * Fix apctest EEPROM setting on various models
  * Close and reopen serial port during extended COMMLOST in apcsmart driver
    (helps recover connection when USB serial port dongles are reconnected)
  * Avoid probing non-APC USB devices as it can cause lockups
  * Fix issue with service failing to start on Windows during boot with USB UPS
  * Fix bogus lock file error when config file error forces early termination
  * Fix MODBUS NOMOUTV reading for voltages other than 120VAC
  * Fix LOADPCT (CI_LOAD) on MODBUS driver
  * Fix issue with net driver not reporting MODEL value
  * Fix several potential issues identified by Coverity static analysis
  * Numerous other fixes and improvements all over the code, many of them
    submitted by users...Thank you!
- Refreshed patches:
  * apcupsd-3.14.1-cloexec.patch
  * apcupsd-3.14.8-cxxld.patch
  * apcupsd-gpp.patch
- Removed patch:
  * apcupsd-3.14.10-nodbg.patch

-------------------------------------------------------------------
Thu Apr  2 07:23:30 UTC 2015 - tchvatal@suse.com

- Cleanup with spec-cleaner
- Remove patch that is never applied today:
  * apcupsd-powersave.patch

------------------------------------------------------------------
Tue Dec  2 22:16:05 CET 2014 - sbrabec@suse.cz

- Fix removal of HALT_POWERDOWN_INSERT (bsc#907702).

-------------------------------------------------------------------
Sun Nov 16 20:08:17 UTC 2014 - matwey.kornilov@gmail.com

- Add patch apcupsd-3.14.10-nodbg.patch: reduce amount of debug
  messages (redhat #1053324)

-------------------------------------------------------------------
Sun Nov 16 17:35:44 UTC 2014 - matwey.kornilov@gmail.com

- fix HIBERNATE variable initialization in apccontrol script

-------------------------------------------------------------------
Tue Aug 19 14:45:38 UTC 2014 - wagner-thomas@gmx.at

- added config for SuSEfirewall2

-------------------------------------------------------------------
Wed May 14 14:15:04 UTC 2014 - meissner@suse.com

- %service_add_pre in  %pre section missing, added.

-------------------------------------------------------------------
Fri Feb 14 19:42:38 CET 2014 - sbrabec@suse.cz

- Replace pm-utils support by systemd (FATE#316824).
  add: apcupsd-pm-utils.patch (for old products only)
  replace: apcupsd.hibernate
  update: apcupsd-hibernate.patch, README.SUSE
- Fix init script references to apcupsd-lite.
  update: apcupsd.init

-------------------------------------------------------------------
Wed Feb 12 21:05:58 CET 2014 - sbrabec@suse.cz

- Updated to version 3.14.11:
  * APC MODBUS protocol support over RS232
    For more see ReleaseNotes.
- Verify GPG signature.
- Remove obsolete apcupsd-early-powerdown script.
- Remove upgrade scripts for SuSE Linux 8 and SLES 8.
- Do not call powersave-notify (regression bnc#856907).

-------------------------------------------------------------------
Thu Jan  9 23:39:33 UTC 2014 - p.drouand@gmail.com

- Add %fillup_prereq PreReq tag and %{fillup_only} in %post to 
  correctly fillup sysconfig file; fix bnc#837337

-------------------------------------------------------------------
Sun Mar 10 13:07:20 UTC 2013 - dimstar@opensuse.org

- Update apcupsd-3.14.8-systemd.patch: apcupsd lives in /usr/sbin,
  not in /sbin (bnc#801312).

-------------------------------------------------------------------
Fri Jan 11 16:49:03 UTC 2013 - cfarrell@suse.com

- license update: GPL-2.0

-------------------------------------------------------------------
Fri Jan 11 09:41:28 UTC 2013 - aj@suse.de

- Remove patch apcupsd-largebuf-overflow.patch, it's upstream now

-------------------------------------------------------------------
Fri Jan 11 09:12:45 UTC 2013 - coolo@suse.com

- fix build on factory - systemd moved to /usr

-------------------------------------------------------------------
Fri Sep 14 20:17:07 UTC 2012 - p.drouand@gmail.com

- Updated to version 3.14.10:
  * Fix missing status and spurrious incorrect status on newer BackUPS CS
    models using USB interface.

* USB compatibility fixes for Mac OS X Lion

* USB driver support for newer Microlink models on Mac OS X Lion and Windows

* Ignore transitions to battery due to calibration (possible if user
    initiates calibration, then exits apctest and starts apcupsd before 
    calibration completes.

* Fix truncation of long UPS model names such as "Smart-UPS RT 5000 XL"

* Fix MODEL vs. APCMODEL confusion. Remove APCMODEL and rename old MODEL
    aka 'mode' to DRIVER.
    
- Improve Systemd and logrotate support
- Remove apcupsd-lite support : difference between apcupsd-lite and 
  apcupsd are minimal or cpu consumption don't justify his presence

-------------------------------------------------------------------
Tue May 29 15:42:50 UTC 2012 - jengelh@inai.de

- Adjust directory name to source config.guess/sub from
  to be a /little/ more future proof.

-------------------------------------------------------------------
Thu Mar  1 20:26:01 UTC 2012 - aj@suse.de

- Buildrequire xorg-x11-devel

-------------------------------------------------------------------
Wed Feb  8 11:55:48 UTC 2012 - dvaleev@suse.com

- fix ppc64 build

-------------------------------------------------------------------
Tue Jan 31 16:25:50 CET 2012 - sbrabec@suse.cz

- Mark all files in /etc/apcupsd as config files. Their editing
  sometimes makes sense (bnc#744358).

-------------------------------------------------------------------
Tue Dec 20 11:26:20 UTC 2011 - coolo@suse.com

- remove call to suse_update_config (very old work around)

-------------------------------------------------------------------
Mon Oct 17 08:51:57 UTC 2011 - mkubecek@suse.cz

- apcupsd-3.14.8-exit-race.patch:
  When terminating apcupsd, cancel other threads before cleanup to
  avoid race condition and possible segfault (bnc#724487).
- Change build requirement from sysvinit to sysvinit-init for 12.1

-------------------------------------------------------------------
Sat Sep 17 11:23:44 UTC 2011 - jengelh@medozas.de

- Remove redundant tags/sections from specfile
- Use %_smp_mflags for parallel build

-------------------------------------------------------------------
Thu Aug 25 20:02:35 CEST 2011 - sbrabec@suse.cz

- Implemented hibernate on power fail (bnc#703592#c39).

-------------------------------------------------------------------
Tue Aug  2 17:40:15 CEST 2011 - sbrabec@suse.cz

- Fixed init check to succeed with unmounted /usr (bnc#703592#c23).

-------------------------------------------------------------------
Mon Jul  4 20:36:19 CEST 2011 - sbrabec@suse.cz

- Updated to version 3.14.8:
  * Implement battery calibration and self-test interval in apctest
    for USB models.
  * Add support for turning the UPS off completely.
  * Updates of SNMP code.
  * Add support for reading battery voltage from the PowerSummary.
  * Switch time/date output format to simplified ISO.
  * Compilation warning fixes.
  * Other bug fixes and improvements.
  * Documentation improvements.
- Removed HAL support.

-------------------------------------------------------------------
Thu Mar 24 15:34:50 UTC 2011 - vcizek@novell.com

- fixed apcupsd-lite path in init script
  (reported later as bnc#703592)

-------------------------------------------------------------------
Tue Jul 27 20:11:58 UTC 2010 - cristian.rodriguez@opensuse.org

- avoid leaking file descriptors (use CLOEXEC, patch from Fedora)

-------------------------------------------------------------------
Wed Mar 31 15:48:30 UTC 2010 - coolo@novell.com

- package requires sysvinit to build

-------------------------------------------------------------------
Mon Feb 15 20:44:32 CET 2010 - seife@opensuse.org

- add missing hal directories to pass rpmlint checks

-------------------------------------------------------------------
Mon Feb 15 19:10:15 CET 2010 - seife@opensuse.org

- fix build with newer net-snmp by undefining MIB

-------------------------------------------------------------------
Fri Oct 30 11:44:14 CET 2009 - sbrabec@suse.cz

- Require distribution-release, not dummy-release (bnc#550230).

-------------------------------------------------------------------
Mon Jun 29 17:08:30 CEST 2009 - sbrabec@suse.cz

- Updated to version 3.14.6:
  * Major updates to the User Manual.
  * New manpages for apcupsd, apcupsd.conf, apctest, apcaccess, and
    apccontrol.
  * Add support for turning the UPS off completely.
  * apcsmart: Deadlock fixes during comms failures.
  * linux-usb: Fix out-of-bounds array access.
  * Fix build with gcc-4.4.
  * apcsmart: Fix crash during process shutdown (SIGTERM).
  * Several other minor fixes and improvements.

-------------------------------------------------------------------
Tue Jun  2 17:45:13 CEST 2009 - crrodriguez@suse.de

- fix build

-------------------------------------------------------------------
Thu Feb 26 00:21:40 CET 2009 - ro@suse.de

- run suse_update_config in autoconf directory to fix build
  on ppc64

-------------------------------------------------------------------
Wed Jan 28 15:49:43 CET 2009 - sbrabec@suse.cz

- Updated to version 3.14.5:
  * docs: Document the /refresh switch for apctray.
  * apctest: Do not create pid file.
  * gapcmon: Network connect timeout fix.
  * Fix a few unsafe uses of sprintf and strcat.
  * gapcmon: Iconify fixes for KDE
  * Fix LOWBATT glitch handling bug.
  * Support shutting down apcupsd instances running in other
    sessions.
  * docs: PCNET username and password details.

-------------------------------------------------------------------
Fri Sep 19 14:46:25 CEST 2008 - ro@suse.de

- buildreq dummy-release instead of openSUSE-release

-------------------------------------------------------------------
Mon Jul 14 17:12:50 CEST 2008 - sbrabec@suse.cz

- Updated to version 3.14.4:
  * Build system rewrite.
  * Built-in version of libgd for multimon cgi has been removed
  * Removal of NLS support.
  * Powerflute has been disabled.
  * gapcmon: Corrected the use of NOMPOWER and the calc of current
    usage amount.
  * Add a heuristic to fix up incorrect NOMINV or NOMOUTV.
  * Fix hal policy file syntax.
  * A HAL policy file is automatically installed on Linux systems
    to disable the hald-addon-hid-ups module which conflicts with
    apcupsd's control of USB UPSes.
  * Add support for Nominal Power.
  * Add units to NOMINV, NOMOUTV, and NOMBATTV stats.
  * Eliminate warnings emitted from gcc-4.2.1.
  * Fix killpower and eeprom settings bug on USB models introduced
    when INPUT reports were prioritized over FEATURE reports.
  * Fix bugs that could cause NIS-net driver to get stuck waiting
    for comms to be restored instead of shutting down.
- Fixed UPS shutdown on systems with /usr on a different file
  system (bnc#407269).

-------------------------------------------------------------------
Wed Feb 20 18:09:57 CET 2008 - jdelvare@suse.de

- Remove duplicate index.html file in documentation, create a
  symbolic link instead to save some disk space.
- Fix rpmlint warnings about bad end-of-line encoding of some
  documentation files.

-------------------------------------------------------------------
Mon Feb 18 16:51:51 CET 2008 - jdelvare@suse.de

- Package apctest.8 properly.
- Convert the user's guide to HTML before packaging it. Not that
  many users know what to do with latex source files (361885).
- Do not package the uninteresting or redundant documentation.
  This makes the package 4 times smaller (installed size divided
  by 15, from 33.1 MB to 2.2 MB on i386) (361885).

-------------------------------------------------------------------
Mon Jan 21 15:17:31 CET 2008 - sbrabec@suse.cz

- Updated to version 3.14.3:
  * HAL policy file is automatically installed on Linux systems to
    disable the hald-addon-hid-ups module which conflicts with
    apcupsd's control of USB UPSes. The file is automatically
    removed when apcupsd is uninstalled.
  * Add support for Nominal Power (aka Configured Active Power)
    reading.
  * Add units to NOMINV, NOMOUTV, and NOMBATTV stats.
  * Eliminate some gcc warnings.
  * Fix killpower and eeprom settings bug on USB modules introduced
    when INPUT reports were prioritized over FEATURE reports.
  * Fix bugs that could cause NIS-net driver to get stuck waiting
    for comms to be restored instead of shutting down.
- Fixed possible buffer overflow.
- Removed support for SuSE Linux <= 10.0.

-------------------------------------------------------------------
Mon Jan 14 14:39:56 CET 2008 - sbrabec@suse.cz

- Updated to version 3.14.2:
  * USB fix for BackUPS LCD series. This fix carries a risk of
    breaking other models, but test results are positive so far.
  * Fix linux-usb device detection bug when multiple hiddev nodes
    are present. Fixes Fedora#245864:
  * Fix SNMP port selection when using SNMP driver.
  * Add workaround for broken BackUPS Pro model that returns
    certain reports encoded in ASCII.
  * apcsmart: Wait 20 seconds before declaring COMMLOST.
  * Documentation updates: Fix up udev info for modern Linux
    distros.
  * Don't leak unnecessary descriptors to child when execing
    apccontrol.
  * Fix bug with multi-threaded net_open() calls.
  * Correct multimon.conf humidity monitoring. (Novell#199834)
  * Fix race between attach_ups() and detach_ups().
  * Remove dependency on libc++ (again).

-------------------------------------------------------------------
Thu Aug 23 13:27:57 CEST 2007 - sbrabec@suse.cz

- Fixed multimon.conf comments for humidity measurement (#199834).

-------------------------------------------------------------------
Tue Jul 24 00:55:01 CEST 2007 - ro@suse.de

- fix build

-------------------------------------------------------------------
Wed Jul  4 17:14:12 CEST 2007 - sbrabec@suse.cz

- Updated to version 3.14.1:
  * PCNET driver supports remote shutdown request from UPS web
    interface
  * Fix potential NIS client lockup when server disappears.
  * Fix crash when displaying EEPROM values more than once.
  * Increase self-test timeout to 40 seconds to accomodate the
    RS 800.
  * Rewrite device opening logic to be more reliable.
  * Do not attempt to cancel shutdowns.

-------------------------------------------------------------------
Thu May 24 01:25:28 CEST 2007 - ro@suse.de

- fix some rpmlint errors

-------------------------------------------------------------------
Wed Apr 11 15:34:00 CEST 2007 - sbrabec@suse.cz

- Updated to version 3.14.0:
  * New stable release.
  * Bug fixes.

-------------------------------------------------------------------
Thu Nov 16 16:46:49 CET 2006 - mrueckert@suse.de

- added apcupsd-3.13.9_missing_netsnmp_include.patch:
  include for net-snmp-config.h was missing.

-------------------------------------------------------------------
Tue Nov  7 00:55:26 CET 2006 - ro@suse.de

- fix permissions for icon files

-------------------------------------------------------------------
Fri Oct 20 13:27:04 CEST 2006 - sbrabec@suse.cz

- Updated to version 3.13.9:
  * Runtime configurable paths for apccontrol.
  * Ambient temperature is reported for USB UPSes with a AP9612
    SmartSlot card.
  * pcnet driver detects COMMLOST and SelfTest events.
  * pcnet driver supports killpower (turning off UPS output power).
  * Bug fixes.

-------------------------------------------------------------------
Wed Sep 20 19:07:54 CEST 2006 - sbrabec@suse.cz

- Build correctly in older products.

-------------------------------------------------------------------
Wed Sep 20 17:08:41 CEST 2006 - sbrabec@suse.cz

- Create /sbin/apcupsd-lite, working with unmounted /usr (#186606).
- Call killpower only if power is failing (#186606#6) (#187454).
- Minor fixes of previous update.

-------------------------------------------------------------------
Mon Sep 18 18:55:38 CEST 2006 - sbrabec@suse.cz

- Updated to version 3.13.8:
  * GUI monitoring application, gapcmon.
  * Bug fixes.

-------------------------------------------------------------------
Tue Sep 12 13:22:15 CEST 2006 - aj@suse.de

- Adjust BuildRequires.

-------------------------------------------------------------------
Mon Apr  3 18:44:55 CEST 2006 - sbrabec@suse.cz

- Do not remove /etc/nologin, if changes are disabled (#161709).

-------------------------------------------------------------------
Sat Mar 25 12:22:03 CET 2006 - ro@suse.de

- remove second preun script

-------------------------------------------------------------------
Fri Mar 24 14:28:48 CET 2006 - sbrabec@suse.cz

- Removed fast incorrect shutdown script (#132478).
- Added README.SUSE.
- Integrated with powersave.
- Do not strip binaries.
- Simplified neededforbuild.
- Removed obsolete halt-setup.sh and clean halt.local.
- Scriptlet fixes.

-------------------------------------------------------------------
Wed Jan 25 21:34:19 CET 2006 - mls@suse.de

- converted neededforbuild to BuildRequires

-------------------------------------------------------------------
Tue Jan 24 01:30:04 CET 2006 - ro@suse.de

- disable parallel build, seems to cause trouble

-------------------------------------------------------------------
Thu Jan 12 19:33:04 CET 2006 - sbrabec@suse.cz

- Updated to version 3.12.1.

-------------------------------------------------------------------
Fri Sep 30 11:12:33 CEST 2005 - sbrabec@suse.cz

- Updated to version 3.10.18 (#116685).

-------------------------------------------------------------------
Tue Jul 12 11:14:06 CEST 2005 - sbrabec@suse.cz

- Updated to version 3.10.17a.
- Moved binaries (linked against libraries in /usr) to /usr/sbin.

-------------------------------------------------------------------
Wed May  4 18:28:09 CEST 2005 - sbrabec@suse.cz

- Removed START_APCUPSD from halt.local (#81281).

-------------------------------------------------------------------
Thu Jan 06 14:30:22 CET 2005 - sbrabec@suse.cz

- Updated to version 3.10.16.

-------------------------------------------------------------------
Tue Nov 30 13:59:26 CET 2004 - sbrabec@suse.cz

- Fixed OS misdetection (missing USB support, #48607).
  Patch from Andrea Arcangeli.

-------------------------------------------------------------------
Mon Aug 23 15:13:16 CEST 2004 - sbrabec@suse.cz

- Updated to version 3.10.15.

-------------------------------------------------------------------
Mon Apr 19 11:54:36 CEST 2004 - ro@suse.de

- Force-define HID_MAX_USAGES
- build using apache2

-------------------------------------------------------------------
Fri Mar 19 12:21:09 CET 2004 - sbrabec@suse.cz

- Removed *.orig files from documentation.

-------------------------------------------------------------------
Thu Feb 05 17:30:35 CET 2004 - sbrabec@suse.cz

- Updated to version 3.10.11.

-------------------------------------------------------------------
Mon Nov 10 13:09:27 CET 2003 - ro@suse.de

- use net-snmp instead of ucdsnmp

-------------------------------------------------------------------
Tue Sep 16 23:11:20 CEST 2003 - kukuk@suse.de

- Remove setuid bit from apcupsd (else SuSEconfig will do it)

-------------------------------------------------------------------
Mon Sep 01 18:09:02 CEST 2003 - sbrabec@suse.cz

- Removed tcpd.h (use systemwide instead).

-------------------------------------------------------------------
Mon Sep 01 15:54:37 CEST 2003 - sbrabec@suse.cz

- Added "Should-Start: hotplug_usb" to init script.
- Fix and update hack of orphan fi in halt.local.
- Fixed pre and postinstall scripts.
- Really turned on and fixed SNMP support.

-------------------------------------------------------------------
Fri Aug 29 21:14:30 CEST 2003 - kukuk@suse.de

- Add "Should-Start: serial" to init script [Bug #28353]

-------------------------------------------------------------------
Fri Aug 15 13:41:04 CEST 2003 - sbrabec@suse.cz

- Updated to development version 3.10.6-05Aug03.
- Turned on all optional features.

-------------------------------------------------------------------
Mon Mar 10 16:53:53 CET 2003 - sbrabec@suse.cz

- Buffer overflow fixes.
- Name clash and error handling fixes.

-------------------------------------------------------------------
Wed Feb 12 15:32:51 CET 2003 - sbrabec@suse.cz

- Updated to version 3.8.6.

-------------------------------------------------------------------
Thu Aug 15 14:39:09 CEST 2002 - mcihar@suse.cz

- added $remote_fs to Required-Start (should fix #17294)

-------------------------------------------------------------------
Fri Aug  2 00:28:03 CEST 2002 - ro@suse.de

- adapted to /srv/www
- added prereqs

-------------------------------------------------------------------
Sat Jul 27 17:43:20 CEST 2002 - adrian@suse.de

- fix build

-------------------------------------------------------------------
Mon Jan  7 08:57:41 CET 2002 - cihlar@suse.cz

- updated to version 3.8.5:
  * Battery Runtime Calibration in the apctest
    program
  * Resolved a crash caused by a lost TCP/IP
    connection

-------------------------------------------------------------------
Mon Dec 17 09:12:27 CET 2001 - cihlar@suse.cz

- updated to version 3.8.4-2:
  * bug fix release

-------------------------------------------------------------------
Mon Dec 10 09:31:18 CET 2001 - cihlar@suse.cz

- removed START_APCUPSD

-------------------------------------------------------------------
Thu Nov 29 09:39:35 CET 2001 - cihlar@suse.cz

- update to version 3.8.3:
  * updated manual
  * several bug fixes
  * added support for new hardware
- fixed permissions of halt-setup.sh
- fixed halt-setup.sh
- moved halt-setup.sh from %postun to %preun

-------------------------------------------------------------------
Tue Nov 27 11:21:02 CET 2001 - cihlar@suse.cz

- fixed variable names in init script [#12451]

-------------------------------------------------------------------
Thu Jul 26 07:54:53 CEST 2001 - cihlar@suse.cz

- fixed call of suse_update_config

-------------------------------------------------------------------
Wed Jul 25 10:12:44 CEST 2001 - cihlar@suse.cz

- update to 3.8.2
- added part with autoconf
- compile with --with-libwrap and --enable-pthreads

-------------------------------------------------------------------
Thu Apr 12 13:54:57 CEST 2001 - cihlar@suse.cz

- fixed init script by new skeleton

-------------------------------------------------------------------
Mon Jan 15 10:57:39 CET 2001 - cihlar@suse.cz

- added apctest

-------------------------------------------------------------------
Wed Jan 10 09:36:42 CET 2001 - cihlar@suse.cz

- update to 3.8.1
- change to new init script mechanism
- fixed initialization of halt.local
- added BuildRoot
- clean up spec file
- bzipped sources
- added fillup of rc.config

-------------------------------------------------------------------
Mon Jun 19 19:07:59 MEST 2000 - kasal@suse.de

- Updated to 3.7.2.  The package is still BETA, see "Todo" below.

-------------------------------------------------------------------
Sun Oct 10 06:06:02 CEST 1999 - bk@suse.de

- new package, requested e.g by Andre Hedrick <andre@suse.com>
  Todo:
  - polish /sbin/init.d/apcupsd and add links to the rcX.d directories
  - add the proper START_APCUPSD= fillup for /etc/rc.config
  - add the changes for halt.sh in the suse subdir

Places

File apcupsd.changes of Package apcupsd

Places