Sign Up
Log In
Log In
or
Sign Up
Places
All Projects
Status Monitor
Collapse sidebar
openSUSE:Step:15-SP4
drbd.24681
drbd.changes
Overview
Repositories
Revisions
Requests
Users
Attributes
Meta
File drbd.changes of Package drbd.24681
------------------------------------------------------------------- Fri May 7 05:53:20 UTC 2021 - nick wang <nwang@suse.com> - bsc#1188472, update to 9.0.29 * fix data corruption when DRBD's backing disk is a degraded Linux software raid (MD) * add correct thawing of IO requests after IO was frozen due to loss of quorum * fix timeout detection after idle periods and for configs with ko-count when a disk on an a secondary stops delivering IO-completion events * fixed an issue where UUIDs where not shifted in the history slots; that caused false "unrelated data" events * fix switching resync sources by letting resync requests drain before issuing resync requests to the new source; before the fix, it could happen that the resync does not terminate since a late reply from the previous caused a out-of-sync bit set after the "scan point" * fix a temporal deadlock you could trigger when you exercise promotion races and mix some read-only openers into the test case * fix for bitmap-copy operation in a very specific and unlikely case where two nodes do a bitmap-based resync due to disk-states * fix size negotiation when combining nodes of different CPU architectures that have different page sizes * fix a very rare race where DRBD reported wrong magic in a header packet right after reconnecting * fix a case where DRBD ends up reporting unrelated data; it affected thinly allocated resources with a diskless node in a recreate from day0 event * speedup open() of drbd devices if promote has not chance to go through * new option "--reset-bitmap=no" for the invalidate and invalidate-remote commands; this allows to do a resync after online verify found differences * changes to socket buffer sizes get applied to established connections immediately; before it was applied after a re-connect * add exists events for path objects * forbid keyed hash algorithms for online verify, csyms and HMAC base alg * fix a regression introduces with 9.0.25; it failed to determine the right device size and the connection hangs in WFBitmapS/WFBitmapT repl state; to trigger this you need to do a partial resync to a new node with different backing device size * fix an issue with netlink packets processed in parallel on multiple CPUs; the bug caused drbdadm adjust failing in very rare cases * fix a very rare occurrence of a reconciliation resync getting stuck * fix a race condition that causes a detach operation to hang; it is very hard to trigger * fix a kernel OOPS (via a BUG()) upon adding a timer twice under very rare timing * fix a counter imbalance that could lead to assertion messages when a protocol A peer disconnects with a certain timing * fix a rare race with receiving bitmap and a state change while establishing a connection * fix UUID handling to avoid false split-brain detections; this bug got triggered an isolated primary that gets demoted, and temporal network interruptions among the remaining nodes * fix resync decision to obey disk states when the generation UUIDs are equal; the effect of this bug was that you could end up with two Outdated nodes after resync * fix concurrent disk-attach operations * Fix possible kernel warning regarding an inbalance of backing device link/unlink * move some amount of kernel backward compatibility code moved from the old method (drbd_wrappers.h) to new cocci semantic patches * add support renaming resources while its devices might be in use and process IO requests * Allow setting c_max_rate to 0 with the meaning that the resync controller has no upper limit for the resync speed * Fix regression: allow live migration between two diskful peers again * following upstream changes to DRBD up to Linux 5.12 and updated compat rules to support up to Linux 5.12 - Remove patch compat_blk_queue_stack_limits.patch Remove patch compat_get_fs.patch Remove patch compat_remove_kernel_setsockopt.patch Remove patch compat-test-header.patch Remove patch drbd-fix-zero-metadata-limit-by-page-size-misaligned.patch Remove patch remove_bdi_cap_stable_writes.patch Remove patch submit-bio-private-date.patch - Modify patch suse-coccinelle.patch - Add patch compat_genl_maxattr_in_ops.patch (48526a0f) - Bug fixes between 9.0.29 and 9.0.30 Add patch drbd-change-to-L_VERIFY_S-after-peer-is-L_VERIFY_T.patch Add patch drbd-Fix-abortion-of-a-connect-2-phase-commit.patch Add patch drbd-Fix-a-possible-NULL-deref-found-with-gcc-11-fan.patch Add patch drbd-Fix-locking-for-the-drbd_devices-idr.patch Add patch drbd-fix-protocol-compatibility-with-drbd-8.4-state.patch Add patch drbd-fix-race-condition-resetting-resync_next_bit.patch Add patch drbd-fix-termination-of-verify-with-stop-sector.patch Add patch drbd-remove-device_to_minor.patch Add patch drbd-use-DEFINE_MUTEX-insteadm-of-mutex_init.patch Add patch Revert-drbd-serialize-syncs-from-multiple-sources.patch - cocci apply: linux-5.12.0-2 queue_discard_zeroes_data__no_present (48920ff2a5a9) ------------------------------------------------------------------- Wed Dec 9 06:40:33 UTC 2020 - nick wang <nwang@suse.com> - bsc#1179708, compat to kernel v5.10 - Add patch compat_get_fs.patch Add patch remove_bdi_cap_stable_writes.patch ------------------------------------------------------------------- Tue Dec 8 09:23:06 UTC 2020 - nick wang <nwang@suse.com> - Update to 9.0.26 * fix a case of a disk unexpectedly becoming Outdated by moving the exchange of the initial packets into the body of the two-phase-commit that happens at a connect * fix adding of new volumes to resources with a primary node * reliably detect split brain situation on both nodes * fix an unexpected occurrence of NetworkFailure state in a tight drbdsetup disconnect; drbdsetup connect sequence * fix online verify to return to Established from VerifyS if the VerifyT node was temporarily Inconsistent during the run * fix a corner case where a node ends up Outdated after the crash and rejoin of a primary node * implement 'blockdev --setro' in DRBD * following upstream changes to DRBD up to Linux 5.9 and ensure compatibility with Linux 5.8 and 5.9 * fix a crash if during resync a discard operation fails on the resync-target node * fix online verify to not clamp disk states to UpToDate * fix promoting resync-target nodes; the problem was that it could modify the bitmap of an ongoing resync; which leads to alarming log messages * pause a resync if the sync-source node becomes inconsistent; an example is a cascading resync where the upstream resync aborts and leaves the sync-source node for the downstream resync with an inconsistent disk; note, the node at the end of the chain could still have an outdated disk (better than inconsistent) * allow force primary on a sync-target node by breaking the resync * minor fixes to the compat tests * fix for writes not getting mirrored over a connection while the primary transitions through the WFBitMapS state * completed missing logic of the new two-phase-commit based connect process; avoid connecting partitions with a primary in each; ensure consistent decisions if the connect attempt will be retried - Add patch compat-test-header.patch Add patch submit-bio-private-date.patch Add patch compat_remove_kernel_setsockopt.patch Add patch compat_blk_queue_stack_limits.patch - Remove patch rely-on-sb-handlers.patch (187bddac0) Remove patch fix-err-of-wrong-return-type.patch (969310232) Remove patch compat_generic_make_request.patch (8615d6837) Remove patch blk_alloc_queue_make_request.patch (edaa9b0f/fb59b40e) Remove patch remove_congested_fn_congested_data.patch (34484003/9b80d46b) ------------------------------------------------------------------- Tue Nov 3 11:21:13 UTC 2020 - nick wang <nwang@suse.com> - bsc#1178388, build error with -Wreturn-type Add patch fix-err-of-wrong-return-type.patch ------------------------------------------------------------------- Sat Oct 10 03:24:29 UTC 2020 - nick wang <nwang@suse.com> - bsc#1177417, kernel oops when submit bio Modify patch compat_generic_make_request.patch Modify patch blk_alloc_queue_make_request.patch - jsc#11801, remove is_opensuse macro for SLE15SP3 only, tumbleweed not support RT yet. ------------------------------------------------------------------- Fri Sep 17 07:38:21 UTC 2020 - nick wang <nwang@suse.com> - update to 9.0.25-0rc1 * fix a race condition between receiving UUIDs and finishing a resync that can lead to a false-positive split-brain detection later on * fix access after free of peer_req objects, that only happened when a resync target node is paused sync source at the same time * fix abortion of local state changes in case they can not proceed due to loss of connection * fix corner cases with reconciliation resync and parallel promote * fix an issue establishing a connection when the multipath feature is used to connect to a stacked resource without a dedicated service IP * fix sometimes a peer-disk state to another resync-target staying Outdated after two resyncs from the same sync source node finish * fix an (unlikely) deadlock while establishing a connection * deactivate the kref_debug code, it has performance implicatios * Introduce the "disconnected" hander; it receives the last connection state in the evnironment variable DRBD_CSTATE - Changes of drbd-9.0.24-1 * fix deadlock when connecting drbd-9 to drbd-8.4 and the drbd-9 side becomes sync-source * fix an issue with 3 (or more) node configurations; with a diskless node and two storage nodes; if one of the storage nodes was hard rebooted and came back and the diskless got primary and did not issue write requests and the returning storage node established a connection with the surviving storage node first, DRBD failed to upgrade the disk state to UpToDate after the resync * detect split-brain situations also when both nodes are primary; this is how it was in drbd-8.4; up to now drbd-9 did not realize the split-brain since it complains about the not allowed dual primary first; for this change a new protocol version was necessary * verified it compiles with Linux 5.7 - bsc#1176749, add compatible patches to SLE15 SP3 kernel. block layer api backport from kernel v5.9 Add patch blk_alloc_queue_make_request.patch Add patch compat_generic_make_request.patch Add patch remove_congested_fn_congested_data.patch ------------------------------------------------------------------- Wed Jun 10 03:33:22 UTC 2020 - nick wang <nwang@suse.com> - bsc#1172761, Update to drbd-9.0.23-1 * fix a deadlock (regression introduced in 9.0.22) that can happen when new current UUID is generated while a connection gets established * Do not create a new data generation if the node has 'allow-remote-read = no' set, is primary, and the local disk fails (because it has no access to good data anyome) * fix a deadlock (regression introduced in 9.0.22) that can be triggered if a minor is added into a resource with an established connection * generate new UUID immediately if a primary loses a disk due to an IO error * fix read requests on diskless nodes that hit a read error on a diskful node; the retry on another diskful node works, but a bug could lead to a log-storm on the diskless node * fix removal of diskless nodes from clusters with quorum enabled (initiated from the diskless itself) * fix wrongly declined state changes if connections are established concurrently * fix continuation of initial resync; before that the initial resync always started from the beginning if it was interrupted * use rwsem _non_owner() operations to avoid false positives of lock-dep when running on a debug kernel * fix a sometimes missed resync if only a diskless node was primary since the day0 UUID * fix a corner case where a SyncSource node does not recognise that a SyncTarget node declared the resync as finished * update compat up to Linux 5.6 - Remove patch without_pr_warning.patch since change in 7e6a20f7 ------------------------------------------------------------------- Wed Jun 10 02:55:39 UTC 2020 - nick wang <nwang@suse.com> - jsc#11801, enable buildrt for Leap15.2 but Tumbleweed. ------------------------------------------------------------------- Tue Mar 10 09:03:04 UTC 2020 - nick wang <nwang@suse.com> - bsc#1166298, Update to drbd-9.0.22-1 * introduce locking to avoid connection retries when UUIDs or relevant flags change during the exchange of this data * improve serialization of events after loosing a primary * fix a constraint in sanitize state that can caused a promote to be deliced by some other node * fix a case of a false positive detection of a split brain condition * allow a resync target to switch to the resync source with less bits out of sync * fix bitmap UUID after resync to use current UUID from self rather than sync source * fix pushing bitmap UUID into history when changed * fix regression introduced with 9.0.20, that can cause a missed resync after a reconciliation resync * fix regression introduced with 9.0.20, that can cause a missed resync after a promote on a diskless node * fix UUID handling in case a node promotes during (a short) reconciliation resync * fix removing of a diskless node when quorum is enabled ------------------------------------------------------------------- Tue Feb 25 07:03:39 UTC 2020 - nick wang <nwang@suse.com> - Update to drbd-9.0.21-1, require coccinelle >= 1.0.8 * fix compat for write same on linux 4.9 and the Debian users * fix kernel compat for linux 4.8 and 4.9; this mainly affected Debian users; The symptoms where slow resync and resync getting stuck always at the same point * enable resync of lost and re-created backing devices (think lost node) when the backing device was thinly provisioned and its current uuid is pre-set to a 'day0 UUID' (by LINSTOR); that works by copying a unused bitmap slot which tracks all changes since day 0 * fix attach when bitmap is on PMEM; before it was set to 'all blocks out-of-sync' upon attach * avoid doing reconciliation resync multiple times by updating the resync target's dagtag after if completed successfully * return disk-state from Outdated to UpToDate when it loses connection while in WFBitMapT and we have a stable and UpToDate peer * new option --force-resync flag can be passed to new-current-uuid, that can be used to trigger initial resync without touching the role - Remove upstream drbd-update-resync-target-s-dagtag.patch - Modify patch suse-coccinelle.patch to adopt spaas ------------------------------------------------------------------- Fri Jan 3 08:52:14 UTC 2020 - nick wang <nwang@suse.com> - bsc#1159786, fix build issue against v5.5 add patch without_pr_warning.patch ------------------------------------------------------------------- Thu Dec 26 07:55:03 UTC 2019 - nick wang <nwang@suse.com> - bsc#1159333, back port patch for duplicate resync. add patch drbd-update-resync-target-s-dagtag.patch ------------------------------------------------------------------- Mon Dec 16 06:29:42 UTC 2019 - nick wang <nwang@suse.com> - bsc#1158446, fix metadata limit due to 64k page size of ppc64le. add patch drbd-fix-zero-metadata-limit-by-page-size-misaligned.patch ------------------------------------------------------------------- Thu Oct 17 17:48:47 UTC 2019 - Richard Brown <rbrown@suse.com> - Remove obsolete Groups tag (fate#326485) ------------------------------------------------------------------- Fri Oct 11 02:32:09 UTC 2019 - nick wang <nwang@suse.com> - Update to drbd-9.0.20-1 * fix a case of false split brain detection if a diskless node promotes multiple times, by aligning the rules for generating a new current-UUID on a diskless nodes with them on a node with disk * check if we still have quorum by exchanging a drbd-ping with peers before creating new current UUID after loosing one peer * fix after weak handling to not interfere with reconciliation resyncs * retry connect when one of the relevant flags changes during UUID exchange * fix reconciliation resync if one of the secondary got an current-UUID update * fix resync to make progress after it was paused by an other resync operation * fix false split-brains when a resync source changes current-UUID during resync operation * fix restore of D_OUTDATED when the resource first only attached and then the peer objects are created (in contrast to the usual, new-peer, attach, connect) * abort creating new current-UUID when writing to meta-data fails in the moment where the new-current-UUID should be written * removed DRBD marking itself as read-only when secondary; this flag was exposed using the BLKROGET ioctl; that should be left to user-land use; recent KVM checks that flag, and does not dare auto-promote when set by DRBD * fix a small memory-leak when creating peer devices * fix a possible information leak of kernel memory that pads net-link packets * completing implications of "allow-remote-read=no"; i.e. when not to create a new-current-UUID as read-write access to the data set was lost; also fail both reads and writes if reads are no longer possible * new option value "rr-conflict=retry-connect"; that helps in scenarios with quorum where stopping a service takes longer than a temporarily network outage and DRBD's reconnect * code cleanups, introduced enums for remaining magic numbers * new kernel-backward-compatibility framework based on spatch/coccinelle, replacing an unmaintainable moloch of C preprocessor hell; Merged the complete kernel-compat submodule * ships with pre-computed compat-patches for main distros' kernels; in case an other kernel is found it tries to use local spatch, if that is not installed the build process tries to use a LINBIT hosted web service to create the compat patch ("spatch-as-a-service"). * compat with up to Linux-5.3-rc2 - Modify patch suse-coccinelle.patch to adopt spaas ------------------------------------------------------------------- Wed Sep 20 08:22:12 UTC 2019 - nick wang <nwang@suse.com> - bsc#1151579, fix collinelle default path and always trigger in obs Add patch suse-coccinelle.patch ------------------------------------------------------------------- Tue Sep 17 04:31:08 UTC 2019 - nwang@suse.com - bsc#1146117, disallow dual primaries when not configured. Modify patch rely-on-sb-handles.patch ------------------------------------------------------------------- Tue Sep 10 07:45:05 UTC 2019 - Jan Engelhardt <jengelh@inai.de> - Restore higher summary specifity. - Drop old-age %clean, %defattr. ------------------------------------------------------------------- Mon Sep 9 07:09:37 UTC 2019 - nick wang <nwang@suse.com> - bsc#1149945, update to 8e93a5d93 (drbd-9.0 branch) * Coccinelle support * compat with up to Linux-5.3 - Remove patch compat_no_bioset_initialized.patch ------------------------------------------------------------------- Fri Jul 19 03:06:11 UTC 2019 - nwang@suse.com - Update to 9.0.19-1 * check on CAP_SYS_ADMIN instead of CAP_NET_ADMIN for certain operations * fix detection of unstable resync * fix possible stuck resync when resync started from an other secondary and later continued from a primary * fix NULL dereference with disk-timeout enabled; was introduced in 9.0.9 * retry connect when own current UUID changes during UUID exchange * fix quorum tie-breaker diskless logic for settings other than "majority" * disable quorum tie-breaker for 0 voters * fix dax_direct_access() error return check * fix resync stuck at near completion; bug was intorduces with 9.0.17 * unblock IO when on-quorum-lost policy is changed (suspend -> io-error) * introduce allow-remote-read configuration option; set it to "no" for DR links you only want to write, but never read * only complain about UUID changes during initial handshake ------------------------------------------------------------------- Tue May 28 05:52:07 UTC 2019 - nwang@suse.com - Upgrade to 9.0.18-1 * Fix an IO deadlock under memory pressure * Fix disconnect timing in case the network connection suddenly drops all packets * Fix some misbehavior that surfaced with Ahead/Behind * Fix potential spinlock deadlock in IRQ * Minor fixes: forget-peer, _rcu iterators * Quickly stop resync during AHEAD/BEHIND by introducing new packet for that purpose. * The quorum feature can now use the connectivity to the majority of Diskless nodes as tiebreaker * Access meta-data using DAX if it is on persistent memory (NVDIMM or PMEM); For write intense workloads this is a x2 to x4 speedup! - Remove patch fix-make-error.patch since merged into upstream(46e8e3fc) ------------------------------------------------------------------- Fri Mar 22 02:10:17 UTC 2019 - nwang@suse.com - Upgrade to 9.0.17-1 * Fix UUID handling of a diskless primary that has not peer with usable data may not touch the current UUID * Fix resync-after dependencies; cross-resource dependencies and missing resources * Fix resync when the sync source suddenly connects to a more recent data set via an other connection and becomes sync target on that other connection; pause first resync; fix wrong display of negative resync progress percentage in this case * Fix volume numbers between 32767 and 65534 * Fix the data integrity implementation; it was broken since drbd-9.0 and reported only false positives * Fix for a corner-case when a promote action happens concurrently with a reconciliation resync * Improve resync code to be able to fully utilize fast storage backend devices and fast networks with resync traffic; as a side effect the settling time of the resync controller got shorter in for most cases * Show in the user-visible message who the opener is if if demote/down fails doe to someone holding a drbd device open * docker file for a "load drbd module container" and allow to disable user-mode-helpers, which is necessary for this container - Add patch fix-make-error.patch for build error of make against TW. ------------------------------------------------------------------- Thu Jan 10 02:16:03 UTC 2019 - nwang@suse.com - bsc#1118732, split brain handles malfunction when 2 primaries. - Add patch rely-on-sb-handlers.patch ------------------------------------------------------------------- Mon Dec 10 08:06:53 UTC 2018 - nwang@suse.com - bsc#1118841, kernel compatible issue. Have bioset_init but no bioset_initialized - Add patch compat_no_bioset_initialized.patch Remove patch compat_have_mempool_init.patch ------------------------------------------------------------------- Wed Nov 21 07:47:51 UTC 2018 - nwang@suse.com - bsc#1116820, kernel compatible issue of sle15sp1 - Add patch compat_have_mempool_init.patch ------------------------------------------------------------------- Fri Oct 26 03:01:05 UTC 2018 - nwang@suse.com - bsc#1115606, Update to 9.0.16-1 * Fix regression (introduced with 9.0.15) in handling request timeouts * Fix a possible distributed loop when establishing a connection * Fix a corner case in case a resync "overtakes" an other one * Fix clearing of the PRIMARY_LOST_QUORUM flag * Check peers before generating new current UUID after loosing a node * In case the locally configured address of a connection is not available keep on retrying until it comes back ------------------------------------------------------------------- Mon Jul 23 02:32:47 UTC 2018 - nwang@suse.com - Update to 9.0.15-1 * fix tracking of changes (on a secondary) against the lost disk of a primary and also fix re-attaching in case the disk is replaced * fix live migrate of VMs on DRBD when migrated to/from diskless nodes * fix an IO deadlock in DRBD when the activity log on a secondary runs full * fix hanging demote after IO error followed by attaching the disk again and the corresponding resync * fix DRBD dopping connection after an IO error on the secondary node * improve details when online changing devices from diskless to with disk and vice versa. (Including peers freeing bitmap slots) * new module parameter to disable support for older protocol versions * improve details when online changing devices from diskless to with disk * remove no longer relevant compat tests * expose openers via debugfs * optimize IO submit code path * compat for v4.18 kernel ------------------------------------------------------------------- Thu May 3 01:04:29 UTC 2018 - nwang@suse.com - Update to 9.0.14-1 * fix regression in 9.0.13: call after-split-brain-recovery handlers no auto-recovery strategies (not even the default: disconnect) would be applied, nodes would stay connected and all nodes would try to become the source of the resync. * fix spurious temporary promotion failure: if after Primary loss failover happened too quickly, transparently retry internally. * fixup recently introduced P_ZEROES to actually work as intended * fix online-verify to account for skipped blocks; otherwise, it won't notice that it has finished, apparently being stuck near "100% done" * expose more resync and online-verify statistics and details * improve accounting of "in-flight" data and resync requests * allow taking down an already useless minor device during "down", even if it is (temporarily) opened by for example udev scanning * fix for a node staying "only" Consistent and not returning to UpToDate in certain scenarios when fencing is enabled * fix data generation UUID propagate during resync * compat for upstream kernels up to v4.17 ------------------------------------------------------------------- Sun Apr 8 02:00:53 UTC 2018 - nwang@suse.com - bsc#1090167, Update to 9.0.13-1 * abort a resync if a resync source becomes weakly and the sync targetis a neighbor of the primary * fix UUID handling with multiple diskless nodes * When a data-set gets into contact with an all diskless cluster, make sure to either set it to "Consistent" or reject the attach * correctly handle when a node that was marked as intentional diskless should get a disk * fix outdating of weakly connected nodes * made returning from Ahead to SyncSource more reliable * fix a hard to trigger deadlock in the receiver * fix online resize in the presence of two or more diskless nodes * fix online add of volumes to diskless nodes when it already has established connections * Set the SO_KEEPALIVE socket option on data sockets * automatically solve a specific split brain when quorum is enabled * Compat: Added support for kernels up to v4.15.x * new wire packet P_ZEROES a cousin of P_DISCARD, following the kernel as it introduced separated BIO ops for writing zeros and discarding * compat workaround for two RHEL 7.5 idiosyncrasies regarding refcount_t and struct nla_policy - Remove patch support-timer-setup.patch. Upstream fix 74b1cbb274 ------------------------------------------------------------------- Sun Feb 11 06:39:19 UTC 2018 - nwang@suse.com - bsc#1080458, enable build with kernel-rt on x86_64. - bsc#1080459, support build against 4.15.0. setup_timer() change to timer_setup() - Add patch support-timer-setup.patch ------------------------------------------------------------------- Wed Jan 24 03:44:56 UTC 2018 - nwang@suse.com - bsc#1077318, Update to 9.0.12 * Fix a race condition in the device_open code path that can cause an internal counter to go negative - Update to 9.0.11 * Fix bug in compat code: Without this fix large bios are not split. ------------------------------------------------------------------- Wed Dec 6 07:24:09 UTC 2017 - nwang@suse.com - bsc#1074169, Update to 9.0.10-1 * Fix resync of two secondary nodes in the presence of a 3rd node that is primary (maybe with disk or diskless); Fixed the race condition that caused the resync to sometimes not terminate * Improve connection behavior with autopromote enable one node Primary and udev present. * Fix in memory alignment of DRBD's struct bio. * Improve the quorum implementation, so that is works nicely with for the purpose of replacing fencing with quorum in a Pacemaker setup. * Ensure compatibility with upstream Linux kernel 4.14 - Remove patch reproducible.patch ------------------------------------------------------------------- Fri Nov 17 03:03:20 UTC 2017 - nwang@suse.com - bsc#1068587, add build request libelf-devel to build. ------------------------------------------------------------------- Wed Oct 11 09:58:26 UTC 2017 - nwang@suse.com - bsc#1062749, disable buildrt against SLE15 x86_64 temporarily. This change will be removed when rt is ready. ------------------------------------------------------------------- Fri Oct 6 07:48:08 UTC 2017 - nwang@suse.com - bsc#1061981, update to 9.0.9 * fix occasionally forgotten resyncs in installations where diskless primaries are present. * fix an issue that causes unexpected split-brain upon connect. * in a cluster with a diskless primary, when a server goes away, and is not outdated, outdate it upon reconnect. * fix update of exposed data UUID on diskless primaries. * fix a possible OOPS when in a debug message regarding bitmap locking * fix discard bigger than 1MiB * fix left over bits in bitmap on SyncSource after resync * fix peers becoming unexpectedly displayed as D_OUTDATED at the end of a resync * fix a race between auto promote and auto demote of multiple volumes in a single resource * Speed up down of many resources by using call_rcu() instead of synchronize_rcu() * Make it compatible with the soon to be released 4.13 kernel - Modify reproducible.patch since part of the patch is merged ------------------------------------------------------------------- Wed Jul 19 05:01:10 UTC 2017 - bwiedemann@suse.com - Add reproducible.patch to sort file lists (boo#1041090) and to override build date (boo#1047218) to fix build-compare ------------------------------------------------------------------- Wed Jun 14 03:21:59 UTC 2017 - nwang@suse.com - bsc#1045473, update to 9.0.8 fix a race condition between adding connections and receiving data fix a OOPS on a diskfull node when a request from a diskless node fix a distributed deadlock when doing a discard/write-same burst fix an issue with diskless nodes adopting wrong current UUIDs fix wrongly rejected two-phase-state transactions fix initial resync, triggered by "--force primary"(regression 9.0.7) Speed-up AL-updates with bio flags REQ_META and REQ_PRIO Merged changes from 8.4.10 and with that compatibility with Linux-4.12 - Remove patch fix-initial-sync-stop.patch - Fix the license to GPL-2.0+ ------------------------------------------------------------------- Thu May 25 07:55:55 UTC 2017 - nwang@suse.com - bsc#1038852, fix initial sync not triggered add patch fix-initial-sync-stop.patch ------------------------------------------------------------------- Wed Apr 26 09:03:00 UTC 2017 - nwang@suse.com - Update to 9.0.7 Using 9.0.7rc2 for upgrading from rc1... - bsc#1028124, fix kernel compat - Fix a potenial split brain - Change the drbd-utils requirement to 8.9.11 ------------------------------------------------------------------- Fri Mar 24 07:44:01 UTC 2017 - nwang@suse.com - Update to 9.0.7rc1 - various fixes to the 2-phase-commit online resize fix fencing and disk state trasition and from consistent, necessary for crm-fence-peer fix calculation of authoritative nodes Quorum to avoid data divergence, an alternative to fencing Compat with Linux 4.10 - Remove patch drbd_wrapper-Blank-out-WRITE_SYNC-warning-for-new-ke.patch - Add fix-resync-finished-with-syncs-have-bits-set.patch for bsc#1025089 - Including the compatible fix of bsc#1031299 ------------------------------------------------------------------- Mon Mar 6 16:14:45 CET 2017 - hare@suse.de - Compability fixes for SLE12 SP3 (bsc#993388, FATE#321732) - Add patch drbd_wrapper-Blank-out-WRITE_SYNC-warning-for-new-ke.patch ------------------------------------------------------------------- Thu Feb 16 06:56:53 UTC 2017 - nwang@suse.com - bsc#1025585, upgrade to 9.0.6 ------------------------------------------------------------------- Fri Nov 25 10:28:35 UTC 2016 - lpechacek@suse.com - Excluded openSUSE from RT KMP build (bsc#1005578) ------------------------------------------------------------------- Wed Nov 19 11:56:17 UTC 2016 - lpechacek@suse.com - Enabled RT KMP build (bsc#1005578) ------------------------------------------------------------------- Mon Oct 24 06:35:26 UTC 2016 - nwang@suse.com - bsc#1006176, compat with kernel 4.8 with 9.0.5 ------------------------------------------------------------------- Mon Oct 24 06:33:56 UTC 2016 - nwang@suse.com - Upgrade 9.0.2 to 9.0.5 - Remove patch compat-4.7-9902af79-i_mutex.patch Remove patch compat-4.7-fe8fb75e-blk_queue_write_cache.patch Remove patch compat-4.7-50225243-kill-nla_put_u64.patch Remove patch compat-4.7-1dee3f59-align-nla-u64.patch Remove patch drbd-buildcompare.patch Remove patch kernel-4.5-compat.patch Remove patch temp.patch ------------------------------------------------------------------- Wed Jun 8 06:03:05 UTC 2016 - nwang@suse.com - bsc#983633, upgrade to ver9.0.2 to build against kernel 4.6/4.7 - Add patch compat-4.7-9902af79-i_mutex.patch - Add patch compat-4.7-fe8fb75e-blk_queue_write_cache.patch - Add patch compat-4.7-50225243-kill-nla_put_u64.patch - Add patch compat-4.7-1dee3f59-align-nla-u64.patch ------------------------------------------------------------------- Fri Apr 8 14:44:21 UTC 2016 - nwang@suse.com - Compat with kernel 4.5 - Add patch kernel-4.5-compat.patch ------------------------------------------------------------------- Mon Mar 7 14:23:53 UTC 2016 - olaf@aepfle.de - Remove timstamp from binaries Add patch drbd-buildcompare.patch ------------------------------------------------------------------- Mon Mar 7 08:42:41 UTC 2016 - nwang@suse.com - Update to release drbd-9.0.1 - Depend on drbd-utils >= 8.9.6 ------------------------------------------------------------------- Mon Nov 30 14:31:22 UTC 2015 - nwang@suse.com - Update to released drbd-9.0.0 - Remove patch 0001-Support-zeroout-device-in-initial-sync.patch - Remove patch update-to-8.4.6-5.patch - Remove patch rename-GFP_WAIT-to-GFP_RECLAIM.patch - Remove patch new-bio-struct.patch ------------------------------------------------------------------- Fri Nov 20 06:50:29 UTC 2015 - nwang@suse.com - BSC#955968, support GFP_RECLAIM in kernel4.4 - Add rename-GFP_WAIT-to-GFP_RECLAIM.patch ------------------------------------------------------------------- Thu Oct 22 05:35:03 UTC 2015 - nwang@suse.com - BSC#950477, support new bio struct in kernel4.3 - Add new-bio-struct.patch ------------------------------------------------------------------- Fri Oct 16 09:18:10 UTC 2015 - nwang@suse.com - BSC#950477, update to 8.4.6-5 to fix bdi congested. - Rename 0001-drbd-Support-zeroout-device-in-initial-sync.patch to 0001-Support-zeroout-device-in-initial-sync.patch - Add update-to-8.4.6-5.patch ------------------------------------------------------------------- Fri Sep 25 04:52:12 UTC 2015 - nwang@suse.com - BSC#947460, add rcdrbd symlink. ------------------------------------------------------------------- Wed Aug 19 08:50:27 UTC 2015 - nwang@suse.com - Fate#317940, merge patch set into one patch. - Support zeroout/discard-devices instead of zap-devices - New feature flag FF_DISCARD - Add patch 0001-drbd-Support-zeroout-device-in-initial-sync.patch - Remove old patch set: Patch 0000-cover-letter-fate317940.patch Patch 0001-drbd-Fix-the-wrong-logic-of-moving-history.patch Patch 0002-drbd-Add-options-zap_devices-to-new-current-uuid.patch Patch 0003-drbd-A-function-to-zero-out-drbd-backing-device.patch Patch 0004-drbd-New-packet-P_ZERO_OUT.patch Patch 0005-drbd-Functions-to-notify-peer-node-to-start.patch Patch 0006-drbd-Wapper-for-zeroing-out-device-by-worker.patch Patch 0007-drbd-Flags-for-background-drbd-device-work.patch Patch 0008-drbd-Function-to-work-with-packet-P_ZERO_OUT.patch Patch 0009-drbd-Receive-zero-out-command-from-peer-node.patch Patch 0010-drbd-Handle-new-current-uuid-zap-devices.patch ------------------------------------------------------------------- Wed Jul 29 01:03:11 UTC 2015 - nwang@suse.com - BSC#939778. Add obsolete of old packages and a description for KMP package. - Require kernel-source-rt for RT. ------------------------------------------------------------------- Mon Jul 20 07:52:36 UTC 2015 - nwang@suse.com - Fate#317940. Speed up initial sync by supporting zero out device. Patch 0000-cover-letter-fate317940.patch Patch 0001-drbd-Fix-the-wrong-logic-of-moving-history.patch Patch 0002-drbd-Add-options-zap_devices-to-new-current-uuid.patch Patch 0003-drbd-A-function-to-zero-out-drbd-backing-device.patch Patch 0004-drbd-New-packet-P_ZERO_OUT.patch Patch 0005-drbd-Functions-to-notify-peer-node-to-start.patch Patch 0006-drbd-Wapper-for-zeroing-out-device-by-worker.patch Patch 0007-drbd-Flags-for-background-drbd-device-work.patch Patch 0008-drbd-Function-to-work-with-packet-P_ZERO_OUT.patch Patch 0009-drbd-Receive-zero-out-command-from-peer-node.patch Patch 0010-drbd-Handle-new-current-uuid-zap-devices.patch - Delete useless patch init-script-fixes.diff - ExcludeArch i586 and s390, since user space split into drbd-utils. ------------------------------------------------------------------- Fri Apr 17 06:34:51 UTC 2015 - nwang@suse.com - Update to 8.4.6 - With DRBD module version 8.4.5, we split out the management tools into their own repository. Started out as "drbd-utils version 8.9.0". To manage DRBD 8.4.5 kernel modules and above, want drbd-utils >= 8.9.0 - fix failing of user space helpers since kernel 3.13. This bug is known as 'out of mem, failed to invoke fence-peer helper' - fix connection timeouts for resources with multiple volumes - fix an issue with DRBD on linux software raid by properly remapping bi_bdev - fix a (hard to trigger) race condition between promoting to primary an connection handshake. In case the bug was hit the Primary got stuck in WFBitmapS connection state - Fix a NULL deref when resuming IO on a diskless primary - Fix compile issues with uncommon architectures - improvements to asender performance. With high end backing storage and networking equipment you may see IOPS improvements between 25% to 50%. - Highest number on a single drbd seen by LINBIT so far: 160000 IOPS - backport of events2 and status commands from drbd9. This allows to be DRBD9 compatible starting with this release, and to get used to DRBD9 compatible status reporting - support for lsblk in drbd - Update to 8.4.5 - fix potential BUG_ON in mempool_alloc for older kernels (<2.6.23) - fix cornercase of resync finished detection - fix drbd_ldev_destroy to run exactly once and in worker context - fix spurious detach/disconnect: don't announce WRITE_SAME - fix NULL pointer deref in blk_add_request_payload - (DISCARD/TRIM handling in sd) - fix regression: potential NULL pointer dereference - fix regression: potential list corruption - fix regression: potential deadlock in adm functions (drbdsetup) - fix regression: /sbin vs /usr/sbin in scripts - fix race stopping the worker thread - new debugfs presence expose oldest requests and other details - userspace moved to own repository - linux 3.13 and 3.14 compatibility - improve adaptive resync controler - reduce bitmap IO during resync - allow write-ordering policy to be bumped up again - trigger tcp_flush_pending_frames() for PING/PING_ACK - fix potential segfault in drbdadm adjust - drbdsetup improvements: fix netlink socket buffers; detect modprobe failure ------------------------------------------------------------------- Fri May 30 04:29:22 UTC 2014 - lwang@suse.com - modify drbd.rules by removing NAME and adding SYMLINK in case that configuration has a device name diffrent from kernel node (bnc#878119) add: fix-udev-for-drbd-start-timeout.patch ------------------------------------------------------------------- Tue May 20 09:13:32 UTC 2014 - lmb@suse.com - Packages drbd-xen, drbd-utils, drbd-bash-completion, and drbd-pacemaker were merged into drbd (bnc#878793) ------------------------------------------------------------------- Sun Apr 13 20:10:00 UTC 2014 - mmarek@suse.cz - Add # needssslcertforbuild to use the project's certificate when building in a home project. ------------------------------------------------------------------- Mon Mar 31 21:44:23 UTC 2014 - rgoldwyn@suse.com - Add Module.supported and preamble (bnc#871132) ------------------------------------------------------------------- Thu Mar 27 07:40:07 UTC 2014 - xli@suse.com - Update to 8.4.4.7 - fix potential BUG_ON in mempool_alloc for older kernels (<2.6.23) - fix cornercase of resync finished detection - fix drbd_ldev_destroy to run exactly once and in worker context - fix spurious detach/disconnect: don't announce WRITE_SAME - fix NULL pointer deref in blk_add_request_payload (DISCARD/TRIM handling in sd) - fix regression: potential NULL pointer dereference - fix regression: potential list corruption - fix regression: potential deadlock in adm functions (drbdsetup) - fix regression: /sbin vs /usr/sbin in scripts - fix race stopping the worker thread - linux 3.13 compatibility - improve adaptive resync controler - reduce bitmap IO during resync - allow write-ordering policy to be bumped up again - trigger tcp_flush_pending_frames() for PING/PING_ACK - new sysfs oldest_requests attribute (may be moved to debugfs) - fix potential segfault in drbdadm adjust - drbdsetup improvements: fix socket buffers; detect modprobe failure - Upstream version cs: 3c1f46cb19993f98b22fdf7e18958c21ad75176d ------------------------------------------------------------------- Thu Mar 13 06:40:32 UTC 2014 - xli@suse.com - Handle drbd devices when presented as phy devices by xenstore with libxl (bnc#865682) + add_phy_to_block-drbd.diff ------------------------------------------------------------------- Wed Jan 29 13:21:11 CET 2014 - ro@suse.de - disable build_kmp on i586 and s390, SLE-12 does not build a runnable kernel there ------------------------------------------------------------------- Mon Oct 14 09:56:15 UTC 2013 - lmb@suse.com ------------------------------------------------------------------- Mon Oct 14 09:27:25 UTC 2013 - lmb@suse.com - Update to official 8.4.4 - drbd: evaluate disk and network timeout on different requests - drbd: Fix a hole in the challange-response connection authentication - drbd: always implicitly close last epoch when idle - drbd: add back some fairness to AL transactions - drbd: keep max-bio size during detach/attach on disconnected primary - drbd: fix a race between start_resync and send_and_submit - drbd: fix deadlock in discard fallback code - Build drbd KMPs. ------------------------------------------------------------------- Thu Oct 10 14:04:56 UTC 2013 - lmb@suse.com - Update to 8.4.4rc2 - fix potential deadlock when concurrently fencing and establishing a connection - fix potential distributed deadlock during verify or resync - fix decoding of bitmap vli rle for device sizes > 64 TB - fix for deadlock when using automatic split-brain-recovery - only fail empty flushes if no good data is reachable - avoid to shrink max_bio_size due to peer re-configuration - fix resume-io after reconnect with broken fence-peer handler - crm-fence-peer: less cib polling, peer-alive detection using crmadmin, and other improvements - OCF RA: avoid too tight pacemaker driven recovery loop on failed promote, implement adjust_master_score parameter - fix too large bursts for very slow resync rates - don't let application IO throttle resync to a stall - Fixed attaching to disks with fixed size external meta-data (This regressions was introduced with 8.4.3) - Fixed a crash when the connection broke at a very exact point in time while a graceful disconnect executes - Support for REQ_DISCARD - Allow parallel promote/demote - Allow online changing of al-stripes and al-stripe-size with the resize command - drbdadm adjust now deals with IP-address changes correctly - Align the internal object model with drbd-9.0 (away from drbd-8.3) - New drbd-proxy option "bwlimit"; allow proxy options on host level - Compiles on Linux v3.10 ------------------------------------------------------------------- Wed Sep 18 09:56:22 UTC 2013 - lmb@suse.com - Update drbd version string in specfile so that a future 8.4.4 check-in will be considered newer than 8.4.4rc1. - Clean-up specfile based on spec-cleaner ------------------------------------------------------------------- Mon Sep 16 11:22:46 UTC 2013 - lmb@suse.com - Update to drbd 8.4.4rc1 - Disable heartbeat support (heartbeat no longer ships on openSUSE) - fix decoding of bitmap vli rle for device sizes > 64 TB - fix for deadlock when using automatic split-brain-recovery - only fail empty flushes if no good data is reachable - avoid to shrink max_bio_size due to peer re-configuration - fix resume-io after reconnect with broken fence-peer handler - fencing script improvements - Fixed attaching to disks with fixed size external meta-data (This regressions was introduced with 8.4.3) - Allow online changing of al-stripes and al-stripe-size with the resize command - drbdadm adjust now deals with IP-address changes correctly - Align the internal object model with drbd-9.0 (away from drbd-8.3) - Do not end up in Unconnected state if the connection breaks at a certain point during the handshake (was introduced with 8.3.12) - Closed a race condition between promoting and connection handshake, that could lead to an inconsistent view of the peer's UUIDS - Fixed a race condition that could lead to a full sync, if connection breaks at a certain point while starting a regular resync - Fixed crm-fence-peer.sh for pacemaker 1.1.8 - Fixed a list corruption for read requests that complete with an error after they were aborted - Fixed a kernel panic if the device size was an exact multiple of 128MiB - Fixed a potential memory allocation during deadlock online resize - Improve the handling of read-errors: Make sure that sectors that had a read error are overwritten with data from the peer on the next resync - Expose the data-generation-uuids through /sys/block/drbdXX/drbd/ - The new flag --peer-max-bio-size for drbdmeta create-md is of use if you plan to use the device for long time without peer - Fixed a potential protocol error and resulting disconnect/reconnect, when a disk fails on the secondary node. (Introduced with 8.4.2) - Do not fail empty flushed on diskless, primary node - Fixed calculation of master scores for single volume and unconfigured resources in the drbd.ocf RA - When the connection breaks during a grace full disconnect DRBD failed to call the eventually configured fence-peer handler. Fixed. - Obey md-barrier setting when changed via the disk-options command - Non blocking queuing of AL-updates; This change significantly improves the number of IOPs in case the workload does not fit into the configured AL size. (Backport from drbd-9) - New options for drbdmeta create-md --al-stripes and --al-stripe-size to create a larger and striped AL - Fixed drbdadm adjust of max-bio-bvecs - Fixed a memory leak of 336 byte per attach/detach cycle - Fix a potential null-pointer deference when configuring invalid resync after dependencies - Fixed IO resuming after connection was established before fence peer handler returned - Fixed an issue in the state engine that could cause state lockup with multiple volumes - Write all pages of the bitmap if it gets moved during an online resize operation. (This issue was introduced with 8.3.10) - Fixed a race condition could cause DRBD to go through a NetworkFailure state during disconnect - Fixed a race condition in the disconnect code path that could lead to a BUG() (introduced with 8.4.0) - Fixed a write ordering problem on SyncTarget nodes for a write to a block that gets resynced at the same time. The bug can only be triggered with a device that has a firmware that actually reorders writes to the same block (merged from 8.3.13) - Fixed a potential deadlock during restart of conflicting writes - Disable the write ordering method "barrier" by default, since it is not possible for a driver to find out if it works reliably since 2.6.36 - All fixes that went into 8.3.13 - Removed a null pointer access when using on-congestion policy on a diskless device - In case of a graceful detach under IO load, wait for the outstanding IO. (As opposed to aborting IOs as a forcefully detach does) - Reinstate disabling AL updates with invalidate-remote (8.4.0 regression) - Reinstate the 'disk-barrier no', 'disk-flushes no', and 'disk-drain no' switches (8.4.0 regression) - Backported the request code from DRBD-9. Improves handling of many corner cases. - Support FLUSH/FUA bio flags - Made the establishing of connections faster - New option 'al-updates no' to disable writing transactions into the - activity log. It is use full if you prefer a full sync after a primary crash, for improved performance of a spread out random write work load - Expose the data generation identifies via sysfs - "--stop" option for online verify to specify a stop sector - Fixed a bug that might cause in kernel list corruption triggered by simultaneous IO on multiple volumes in a single resource - Fixed a bug that might cause a kernel OOPS in the worker thread while the receiver tied to establish a connection (drbd-8.4.0 regression) - Fixed an issue in the receiver that could cause connection triggered by simultaneous IO on multiple volumes in a single resource - Consider the discard-my-data flag for all volumes - Fixed attaching to backing devices that do not support barriers/flushes, when barriers/flushes are not disabled by the configuration. (drbd-8.4.0 regression) - Fixed a rare compatibility issue with DRBD's older than 8.3.7 when negotiating the bio_size - Fixed a rare race condition where an empty resync could stall with if pause/unpause events happen in parallel - Made the re-establishing of connections quicker, if it got a broken pipe once. Previously there was a bug in the code caused it to waste the first successful established connection after a broken pipe event. - crm-fence-peer.sh: Can now deal with multiple DRBD instances being in a master/slave group - Optional load balancing for read requests: new keyword "read-balance" ------------------------------------------------------------------- Mon May 13 10:44:16 CEST 2013 - ohering@suse.de - Make /etc/xen mode 0700 to protect vnc passwords. ------------------------------------------------------------------- Tue Jul 10 07:51:21 UTC 2012 - tserong@suse.com - Don't use /var/lock/subsys in init script (bnc#714643) ------------------------------------------------------------------- Fri Dec 16 03:45:16 UTC 2011 - tserong@suse.com - update to 8.3.11 * Added missing spinlock in compressed bitmap receive (regression introduced in 8.3.10, could lead to "negative" out-of-sync stats and non-terminating resync when "use-rle" is enabled) * Fixed handling of read errors during online verify runs * Fixes for possible distributed deadlocks during online verify and checksum based resync processes * Fixed handling of IO errors with an on-io-error=pass-on policy; the disk state goes to inconsistent * Fixed the behavior in case ping-timeout and ping-int are set to the same value * Fix for connecting on high latency network links * Fixed wrong connection drops ("PingAck did not arrive in time") with asymmetrically congested networks * Fixed state transitions if fence-peer handler returns after connection was established again * Fixes to drbdmeta and drbdsetup for the > 16TByte support * Made negotiation of max_bio_size conservative instead of optimistic * Network timeouts for mirrored write requests are now always enforced, no longer only when the socket is congested ------------------------------------------------------------------- Sun Sep 18 17:17:12 UTC 2011 - jengelh@medozas.de - Remove redundant tags/sections from specfile (cf. packaging guidelines) ------------------------------------------------------------------- Mon Feb 21 14:10:49 UTC 2011 - ro@novell.com - update to 8.3.10 * Fixed a subtle performance degradation that might affected synchronous work loads (databases) (introduced in 8.3.9) * Fixed a locking regression (introduced in 8.3.9) * Fixed on-no-data-accessible for Primary, SyncTarget nodes (Bugz 332) * Progress bar for online verify * Optionally use the resync speed control loop code for the online verify process as well * Added code to detect false positives when using data-integrity-alg * New config option on-congestion and new connection states ahead and behind * Reduced IO latencies during resync, bitmap exchange and temporal states * Only build a single kernel module package on distributions that provide the infrastructure to have kernel version independent modules * On 64bit architectures allow device sizes up to one petabyte - update to 8.3.9 * Fix for possible deadlock on IO error during resync * Fixed a race condition between adding and removing network configuration. Lead to a BUG_ON() when triggered. * Fixed spurious full syncs that could happen after an empty resync and concurrent connection loss. * Fixed spurious full syncs that happened when connection got lost while one node was in WFSyncUUID state (Bugz 318) * Fixed a race in the meta-data update code path, that could lead to forgotten updates to the meta-data. That in fact could lead to unexpected behavior at the next connect * Fixed potential deadlock on detach * Fixed potential data divergence after multiple failures * Implicitly create unconfigured devices which are referenced in sync-after dependencies. * OCF RA now also works with pacemaker 1.1 * Allow BIO sizes of up to 128kByte. Note: In case drbd-proxy is used, at least version 1.0.16 of drbd-proxy is required. * New configuration keyword on-no-data-accessible. Possible values io-error, and suspend-io. The default is "io-error", which matches the previous behavior. * If the fencing policy is set to resource-and-stonith, the primary node will creates the new current UUID _after_ the fencing handler returned. (Before it did immediately) * Rewrote the resync speed control loop code. New configuration parameters c-plan-ahead, c-fill-target, c-delay-target, c-max-rate, c-min-rate. * Disable activity log updates when all blocks of an unconnected device is are out of sync. That can be activated by using "invalidate-remote" on an unconnected primary. * Improved IPv6 support: link local addresses * Improved resync speed display in /proc/drbd ------------------------------------------------------------------- Fri Oct 22 00:40:04 CEST 2010 - ro@suse.de - update to 8.3.8.1 * Revert delay probes, they could potentially lead to stalled resync. Feature is being re-implemented differently * DRBD ocf resource agent now treats hostnames case insensitive - update to 8.3.8 * Do not expose failed local READs to upper layers, regression introduced in 8.3.3 * Fixed support for devices with 4k hard sector size (again) * Fixed a potential Oops in the disconnect code * Fixed a race condition that could cause DRBD to consider the peers disk as Inconstent after resync instead of UpToDate (Bugz 271) * Fixed a reace condition that could cause DRBD to consider the peers disk as Outdated instead of Inconsistent during resync (Bugz 277) * Disallow to start a resync with invalidate / invalidate-remote when the source disk is not UpToDate * Forcing primary works now also for Consistent, not only for Outdated and Inconsistent (Bugz 266) * Improved robustness against corrupt or malicous sector addresses when receiving data * Added the initial-split-brain, it gets called also if the split-brain gets automatically resolved * Added the --assume-clean option for the resize command, it causes drbd to not resync the new storage after an online grow operation * drbdadm: Do not segfault if stacked-on-top-of refers to an undefined res * drbdadm: Do not consider configs with invalid after statements as invalid * drbdadm: Do not segfault if the peer's proxy section is missing * drbdadm: Allow nullglob in include statement * drbdadm: Fixed the use of waitpid * init script: fix insserv headers (Debian 576901) * Gave the receiving code the ability to use multiple BIOs for writing a single data packet; now DRBD works with BIOs up to 32kByte also on LVM devices; from now on the use_bmbv config option does nothing * New command check-resize, that allows DRBD to detect offline resizing and to move internal meta-data accordingly * Added a control loop, that allows DRBD to find auto tune the resync speed, on connections with large queues (drbd-proxy) * --dry-run option for connect; disconnects after sync handshake * --overwrite-data-of-peer got an alias named --force * Improvements to crm-fence-peer * Fixed option parsing and stacking in snapshot-resync-target-lvm.sh * Compiles on 2.6.33 and 2.6.34 - removed patches: 64bit-fixes.diff (upstream/obsolete) ------------------------------------------------------------------- Fri Jun 25 05:39:10 UTC 2010 - tserong@novell.com - Include Linbit RA ------------------------------------------------------------------- Sun Apr 11 14:29:39 CEST 2010 - dmueller@suse.de - remove KMP subpackage, the kernel modules are part of the kernel and don't build out of tree anymore - update to 8.3.7: * Lots of fixes to the new RPM packaging * Lots of fixes to the autoconfig stuff * Following the rename of CONFIG_LBD to CONFIG_LBDAF * Silenced an assert. Could trigger after changing write ordering (Bugz 261) * Fixed a race condition between detach and ongoing IO. Very hard to trigger, caused an OOPS in make_request/drbd_make_request. (Bugz 262) * Fixed a regression in the resync handshake code introduced before 8.3.3. That bug causes DRBD to block during the initial handshake when a partial resync is not possible but a full resync is necessary. Happens very rarely. (Bugz 260) * Do not drop into StandAlone mode when connection is lost during authentication * Corrected a null test in the authentication code, found by conccinelle, thanks to upstream integration. The chance to trigger that was probably 10^-9. * crm-fence-peer.sh is now also usable if DRBD is managed from the xen block helper script * Fixes to the init script's dependencies * Backported cleanups that where contributed to the in kernel DRBD * Allow online resizing of disconnected devices, new option to drbdsetup drbdsetup /dev/drbdX resize --assume-peer-has-space * Allow multiple after options in the syncer section for stacked setups * Correctly process relative paths in include statements in drbd.conf * New option (-t) for drbdadm to test syntax of config snippets * Following Linux upstream changes 2.6.32 (SHASH and in_flight issues) * New /etc/drbd.conf example that suggests the use of /etc/drbd.d/xxx.res * Fixed a regression introduced shortly before 8.3.3, which might case a deadlock in DRBD's disconnect code path. (Bugz 258) * Fixed drbdsetup X resume-io which is needed for the recovery from the effects of broken fence-peer scripts. (Bugz 256) * Do not reduce master score of a current Primary on connection loss, to avoid unnecessary migrations * Do not display the usage count dialog for /etc/inti.d/drbd status ------------------------------------------------------------------- Fri Jan 8 16:54:23 CET 2010 - vuntz@opensuse.org - Remove unneeded glib-devel BuildRequires. ------------------------------------------------------------------- Wed Oct 7 19:16:37 UTC 2009 - aj@suse.de - update to 8.3.4: * Support kernel 2.6.31 * Numerous bug fixes * Support for Infiniband via SDP (sockets direct protocol) - Add build fix from upstream. ------------------------------------------------------------------- Sun Jul 19 21:51:40 CEST 2009 - coolo@novell.com - trying to get installation right ------------------------------------------------------------------- Tue Jul 14 12:13:04 CEST 2009 - teelynn19@aim.com - update to 8.3.2 * For kernel 2.6.30 support - see internal changelog of source ------------------------------------------------------------------- Mon Apr 20 01:13:04 CEST 2009 - ro@suse.de - update to 8.3.1 * Fixed drbdadm invalidate on disconnected devices (reg in 8.2.7) * Fixed a hard to trigger spinlock deadlock when using device stacking with the upper device having a smaller minor number than the lower device. (Bugz 210) * Adding a missing range check in ensure_mdev() * Implemented a congested_fn; the kernel can keep its pdflushes running now * Improvements the connection code for high latency links * Fix for several potential memory leaks when allocating a device * Use an additional meta data bit to store the fact of an old crashed primary * Udev rule that populates /dev/drbd/by-res/ and /dev/drbd/by-disk/ * New timeout option: outdated-wfc-timeout * New drbdmeta option: --ignore-sanity-checks * Include statement for drbd.conf * Improvements to drbd-overview.pl * Fixed snapshot-resync-target-lvm.sh to work with more than 10 devices * Do not force a full resync after a detach on a primary node * Compatibility with Linux 2.6.27, 2.6.28 and 2.6.29 - update to 8.3.0 * Fixed 'sleep with spinlock held' in case online verify found a difference * Fixed error code pathes in request processing. * Fix for stack smashing in drbdmeta * Fixed a bug that could lead to a crash when detaching/attaching on the primary under heavy IO (Bugz 171) * Fixed a bug in the new epoch code (introduced with 8.2.7). Might cause crash at reconnect after connection loss during heavy IO (Bugz 160) * Fixed a bug in drbdsetup that could cause drbdsetup wait-connect to miss the connection event. * Fixed a race condition in the new barrier code. (Reordered barrier ACKs) * Do not rely on blkdev_issue_flush() returning ENOTSUPP * bitmap in unmapped pages = support for devices > 4TByte (was DRBD+) * checksum based resync (was DRBD+) * support for stacked resource (was DRBD+) * Added support for stacked resources to the bash completion stuff * Added missing documentation (manpages) * Fixed drbdadm handlers for stacked resources * Support of drbd-proxy in stacked setups * RedHat cluster suite (rgmanager) integration scripts * Renamed 'state' to 'role' * More build compatibility with older vendor kernels * Added drbd-overview.pl to the packages - update filelist ------------------------------------------------------------------- Tue Jan 13 14:16:41 CET 2009 - dgollub@suse.de - Add kernel-syms-rt to build requires to build SLERT KMPs ------------------------------------------------------------------- Wed Dec 10 13:30:00 CET 2008 - lmb@suse.de - Update with changes from 8a9ba53abe973301639beacc55eec569b43507e5: - Fix buffer overflow and off-by-one errors in drbd user-space token parser (bnc#450883). - Fix resizing of devices. - Fix a NULL pointer dereference in barrier handling. - Handle failing request better. - Race in UUID synchronization. - Fix a call to a blocking function from within a spinlock. - drbd-optflags.patch: removed, is now upstream. ------------------------------------------------------------------- Fri Nov 21 14:00:00 CET 2008 - lmb@suse.de - Update from 8.2.7-rc1 to 8.2.7 proper. - Endianness fixes. - Handle out-of-sequence barrier acks. - Allow DRBD to user other cn_idx values in case our default value is already taken. - Although Primary/Diskless/StandAlone is invalid it is not unconfigured - become UpToDate on both after detach-attach on a connected secondary device pair - 2.6.28 compatibility (needed for SLE11 kernel) - Bugfixes to write barrier handling. ------------------------------------------------------------------- Mon Oct 27 14:00:00 CET 2008 - lmb@suse.de - Include fixes from upstream (0e87a13b63e2ef87af6cfcc0d875721c53f37ed9). - Fixed possible Oops on connection loss during sync handshake. - Latency improvements. - Improved barrier support. ------------------------------------------------------------------- Thu Sep 4 12:13:27 CEST 2008 - lmb@suse.de - Imported some changes from upstream, including: - Made it to compile on Linux-2.6.26 - Fixed online resizing if there is application IO on the fly when the resize is triggered. - Fixed online resizing if it is triggered from the secondary node. - Fixed a possible deadlock in case "become-primary-on-both" is used, and a resync starts - Fixed the invocation of the pri-on-incon-degr handler - Fixed the exit codes of drbdsetup - sock_create_lite() to avoid a socket->sk leak - Auto-tune socket buffers if sndbuf-size is set to zero ------------------------------------------------------------------- Mon Aug 18 18:07:48 CEST 2008 - mrueckert@suse.de - remove outdated options in the fillup_and_insserv call ------------------------------------------------------------------- Mon Aug 18 11:26:43 CEST 2008 - schwab@suse.de - Fix name of completions file. ------------------------------------------------------------------- Tue Jul 15 09:41:31 CEST 2008 - lmb@suse.de - Update to 8.2.6 and include all bugfixes from upstream. - Fix loading of module (bnc#403731). - Include bash completion for drbdadm. - Added the before-resync-target handler. - Fixed the out-of-sync handler. - Added the max-bio-bvecs option to workaround issues in a stack of DRBD/LVM/Xen. - Fix online resizing in case if triggered from secondary. - Includes bugfixes from 8.0.11 -> 8.0.12 branch. ------------------------------------------------------------------- Wed Jun 4 12:04:56 CEST 2008 - ro@suse.de - buildreq xen-tools only on x86,x86_64 ------------------------------------------------------------------- Tue Jun 3 21:57:39 CEST 2008 - coolo@suse.de - avoid packaging a directory of xen-tools with different permissions ------------------------------------------------------------------- Tue Apr 15 15:03:25 CEST 2008 - lmb@suse.de - Update to 8.2.5 (FATE#302403) - Include online-verify + various fixes to it. - Fix races between online-verify and application writes. - Fixed data-integrity-alg features. - Improved latency. - Full support for migration of meta-data from 0.7 -> 0.8. - Fix some more races, bugs, and memory leaks. ------------------------------------------------------------------- Wed Dec 5 15:03:58 CET 2007 - ro@suse.de - hack to compile with 2.6.24 ------------------------------------------------------------------- Tue Sep 18 12:07:34 CEST 2007 - ro@suse.de - do really build a module ------------------------------------------------------------------- Mon Sep 17 14:41:31 CEST 2007 - lmb@suse.de - Update to drbd 8.0.6 for kernel-compatibility (310187) ------------------------------------------------------------------- Wed Apr 4 22:13:20 CEST 2007 - lrupp@suse.de - added module-init-tools to BuildRequires ------------------------------------------------------------------- Fri Mar 30 15:20:11 CEST 2007 - rguenther@suse.de - add flex BuildRequires - add /etc/modprobe.d directory ------------------------------------------------------------------- Fri Mar 30 02:26:42 CEST 2007 - ro@suse.de - added bison to buildreq ------------------------------------------------------------------- Mon Jan 15 09:43:01 CET 2007 - lmb@suse.de - Update to 0.7.23 for Linux kernels >2.6.19. ------------------------------------------------------------------- Mon Oct 30 23:33:13 CET 2006 - lmb@suse.de - Update to the officially released 0.7.22 version. - Implement "freeze_io" feature. - convert-MODULE_PARM.diff: drop unneeded patch. ------------------------------------------------------------------- Fri Oct 6 14:03:21 CEST 2006 - lmb@suse.de - Update to 0.7.22: - In protocol A and B, on connection loss, drbd could "forget" to set certain areas out of sync. - fix races between failure in drbd_send_dblock and concurrently running tl_clear. - fix potential access-afer-free in drbd_dio_end. - fix possible list corruption respective resulting deadlock in receive_DataRequest. - improved the drbd_thread_stop / start code. ------------------------------------------------------------------- Mon Aug 14 21:44:10 CEST 2006 - lmb@suse.de - Update to 0.7.21. * Fixed the "syncer stalled" after reconnect symptom. * Fixed the "stalled in WFParams" after reconnect symptom. The cause of this bug was actually a misuse of the data socket. * Allow to set the uplug_watermark to 1, only usefull for very strange cases. * The GC comparison code failed to start a resync in case the two cluster node failed simultaniously (common power failure). * Fixed DRBD's code to start kernel threads to work on 2.6.17 also. * IOCTL return codes fixed for 32bit userland - 64 bit kernel setups. * New config option "unplug-watermark". * Released the drbd_alloc_ee() / drbd_free_ee() implementation from the DRBD+ branch to the main branch. * Fixed a bug where lc_del() left a list poison in an LRU chache's hash table. The only way to trigger this bug was: up (>>200M), primary, mkfs, resize to 200M, down, up * DRBD now propagates the backing storage's read ahead properties to upper layers. With devices that read very fast, this is important. * GFP_KERNEL was changed to GFP_NOIO in a few places, to make it more save against deadlocks in the memory subsystem. ------------------------------------------------------------------- Thu May 4 17:10:38 CEST 2006 - lmb@suse.de - Import fixes from 0.7.18: - Under high memory pressure it was possible to hit a deadlock on a kmalloc(). Changed the GFP mask, it is no longer possible to deadlock it with memory pressure. - With very unlucky network timing during connect DRBD falls into a connect / drop-connection loop, that as soon as DRBD is in this loop is very stable. This is fixed now, DRBD detects this situation an breaks out of it. - Fix to the init-script. Now it waits until udev has created the device nodes of _all_ resources. - A small fix for the 32bit userland 64bit kernel people, running older kernels. - Improved handling of IO errors during initial read in of the activity log. ------------------------------------------------------------------- Sun Apr 2 20:01:34 CEST 2006 - agruen@suse.de - convert-MODULE_PARM.diff: Convert from the obsolete MODULE_PARM to the new module_param. ------------------------------------------------------------------- Mon Mar 27 17:43:40 CEST 2006 - lmb@suse.de - Fix memory allocation flags for the activity log (GFP_KERNEL -> GFP_NOIO) to avoid possible deadlock. ------------------------------------------------------------------- Mon Mar 6 17:09:05 CET 2006 - lmb@suse.de - Import upstream fixes from 0.7.17: - There was a bug that could cause the activity log to be not applied after a primary crash, when an other size than 127 elements was configured. - There was a bug in the activity log code, that could cause that the latest update to the AL is omitted at recovery time. - The "Marked additional XXKB as out-of-synced based on AL." message showed one one eighth of the real amount. ------------------------------------------------------------------- Thu Feb 16 16:41:19 CET 2006 - lmb@suse.de - Update to 0.7.16, new fixes: - DRBD no longer shrinks an consistent device if it gets connected to an smaller peer or attached to a smaller disk. - There was a bug related to the degr-wcf-timeout config option, it was never used in recent DRBD releases. Fixed. ------------------------------------------------------------------- Fri Feb 3 11:59:29 CET 2006 - agruen@suse.de - drbd.spec: Replace %arch with %_target_cpu. ------------------------------------------------------------------- Thu Feb 2 12:04:52 CET 2006 - ro@suse.de - added KMP subpackage (required with suse_kernel_module_package) ------------------------------------------------------------------- Tue Jan 31 15:04:10 CET 2006 - lmb@suse.de - Change km_drbd to a KMP. - Import fix to deal with serialized recursive calls to generic_make_request() and avoid a deadlock (SVN r2056). ------------------------------------------------------------------- Thu Jan 26 12:25:02 CET 2006 - lmb@suse.de - Compile fix for 2.6.16-rc1. ------------------------------------------------------------------- Wed Jan 25 21:35:35 CET 2006 - mls@suse.de - converted neededforbuild to BuildRequires ------------------------------------------------------------------- Mon Jan 23 17:57:02 CET 2006 - lmb@suse.de - Import some updated documentation. ------------------------------------------------------------------- Tue Dec 20 14:14:54 CET 2005 - lmb@suse.de - Update to 0.7.15. ------------------------------------------------------------------- Thu Dec 1 15:57:58 CET 2005 - lmb@suse.de - Update to 0.7.14/SVN. ------------------------------------------------------------------- Thu Sep 1 12:18:25 CEST 2005 - lmb@suse.de - Switch to stable version 0.7.13. ------------------------------------------------------------------- Thu Jun 30 09:43:19 CEST 2005 - meissner@suse.de - use RPM_OPT_FLAGS correctly. ------------------------------------------------------------------- Mon Feb 21 18:08:00 CET 2005 - lmb@suse.de - Update to upstream 0.8_pre1 (SVN 1763). ------------------------------------------------------------------- Wed Feb 2 18:42:01 CET 2005 - lmb@suse.de - Update to upstream 0.7.10 (1754). ------------------------------------------------------------------- Fri Jan 14 01:32:35 CET 2005 - ro@suse.de - fix typo in specfile ------------------------------------------------------------------- Wed Dec 1 14:51:29 CET 2004 - lmb@suse.de - Update to upstream version 0.7.6. ------------------------------------------------------------------- Mon Sep 20 15:54:07 CEST 2004 - lmb@suse.de - Merge fixes from SLES9 SP1 with STABLE. ------------------------------------------------------------------- Fri Sep 3 15:36:21 CEST 2004 - lmb@suse.de - Realign with upstream. ------------------------------------------------------------------- Fri Aug 27 12:41:43 CEST 2004 - lmb@suse.de - Allow invalidate if cstate<Connected and Secondary - Data integrity protection: Disallow the user to make a primary node SyncTarget via IOCTLs - Fix modprobe.d documentation (for users who do want to use the new block major explicitly). - Cosmetic: Disable XFS statistics by default. ------------------------------------------------------------------- Wed Aug 25 17:49:55 CEST 2004 - lmb@suse.de - Fix human-count handling to avoid more data inconsistency. - SLES9/SL9.1: Do NOT use new major number by default. - Pre-generate documentation. Shorten dependencies even more! ------------------------------------------------------------------- Mon Aug 16 12:38:43 CEST 2004 - lmb@suse.de - Shrink dependency list even further. ------------------------------------------------------------------- Mon Aug 16 11:57:16 CEST 2004 - lmb@suse.de - Remove subversion requirement for building with perl hack. ------------------------------------------------------------------- Tue Aug 10 14:29:28 CEST 2004 - lmb@suse.de - Add modprobe.d file so that upgrading from previous versions is smooth. ------------------------------------------------------------------- Fri Aug 6 15:09:20 CEST 2004 - lmb@suse.de - Update to 0.7.2-final (still from SVN). - Proper handling of backing storage devices that occasionally fail READA (=read ahead) requests. (E.g. LVM and MD) DRBD now fails READA requests itself, if a resynchronisation is running and it would need to fetch the block from its peer. - "drbdadm adjust" had a race, which caused random errors. ( Missing waitpid() ). Fixed now. - Properly substract SyncPause times from the syncer performance numbers. - Fix to the syncer progress bar in /proc/drbd. ------------------------------------------------------------------- Fri Aug 6 10:56:41 CEST 2004 - lmb@suse.de - Fix minor module build issue. ------------------------------------------------------------------- Wed Aug 4 13:35:02 CEST 2004 - lmb@suse.de - Upgrade to 0.7.2-pre from SVN - Changes block major from 43 to officially reserved 147 and from /dev/nbXX to /dev/drbdXX. - Work-around for XFS bug. - Handle human and timeout counters correctly. - Some bugfixes and speedups in particular for protocol A and B. ------------------------------------------------------------------- Wed Jul 7 16:40:38 CEST 2004 - lmb@suse.de - Fix various 64bit issues. (Final part of #41538) ------------------------------------------------------------------- Thu Jul 1 20:14:50 CEST 2004 - lmb@suse.de - Reenable fixed zero-copy again. (#42222) - Fix drbd to work with hard sector sizes != 512bytes (dasd) (#41538) - Fix 64bit problem when calling wait_event_interruptible_timeout() - Merge upstream code cleanups. ------------------------------------------------------------------- Fri Jun 18 14:56:31 CEST 2004 - lmb@suse.de - Update to drbd-0.7-pre8 from upstream: - Disabling zero-copy IO for now (#41852). - Bitmap code restructured and lots of bugs fixed. - Safe default: Always force a full-resync on initial setup. - Ensuring that we never sync/read from an inconsistent peer. - Various other fixes. ------------------------------------------------------------------ Wed Jun 9 00:25:46 CEST 2004 - lmb@suse.de - fix ioctls on s390x - Fix failure in local disk handling. ------------------------------------------------------------------- Wed Jun 2 10:37:14 CEST 2004 - lmb@suse.de - Do not go into in an infinite loop on recursive symlinks under /dev. - More consistent error handling in the kernel module. ------------------------------------------------------------------- Tue Jun 1 16:06:23 CEST 2004 - lmb@suse.de - Import test harness. - More fixes from upstream: + Rate-limit printks to prevent DoS + Test for whether the lower level device is detached in all cases + Do not send several Write Hints in a row ------------------------------------------------------------------- Thu May 27 13:27:15 CEST 2004 - lmb@suse.de - Import bugfixes from upstream (equivalent to drbd-0.7-rc1). (Replaces some previously separate patches.) - Fix drbddisk to reply to heartbeat status inquiries correctly. - Clean up build. - Enable more verbose logging. ------------------------------------------------------------------- Tue May 18 10:59:06 CEST 2004 - lmb@suse.de - Fix recalc_sigpending useage. - Activate additional debugging useful for test harness runs. ------------------------------------------------------------------- Wed May 12 13:18:50 CEST 2004 - lmb@suse.de - Update to drbd 0.7-pre7, bugfix release ------------------------------------------------------------------- Thu Apr 29 10:53:14 CEST 2004 - kraxel@suse.de - one more kernel build fix, previous was incomplete :-/ ------------------------------------------------------------------- Wed Apr 28 09:36:49 CEST 2004 - kraxel@suse.de - fix kernel build failure. ------------------------------------------------------------------- Sat Apr 24 09:00:00 CEST 2004 - lmb@suse.de - Fix random memory corruption bug. ------------------------------------------------------------------- Fri Apr 23 14:30:00 CEST 2004 - lmb@suse.de - Update to latest CVS to fix SMP issues. ------------------------------------------------------------------- Tue Apr 6 02:49:26 CEST 2004 - agruen@suse.de - Add missing include path (testing with Makefile.suse currently does not catch this case). ------------------------------------------------------------------- Tue Mar 30 10:55:25 CEST 2004 - lmb@suse.de - Update to CVS-2004-03-30 - Should fix #37446 - Add new magic for km test builds if kernel-source is present. ------------------------------------------------------------------- Fri Mar 19 14:43:46 CET 2004 - lmb@suse.de - Update to latest CVS once more. - Kill any files laying around from patches or CVS artifacts. ------------------------------------------------------------------- Mon Mar 15 16:15:07 CET 2004 - lmb@suse.de - Update to latest CVS. ------------------------------------------------------------------- Thu Mar 4 16:17:59 CET 2004 - kraxel@suse.de - add olh's regparm fix. ------------------------------------------------------------------- Thu Feb 19 19:13:08 CET 2004 - lmb@suse.de - Upgrade to 0.7_pre5 from upstream. - Include some hacks to test build of the km_ modules. ------------------------------------------------------------------- Tue Feb 17 13:07:19 CET 2004 - lmb@suse.de - Stale patch included last time. ------------------------------------------------------------------- Tue Feb 17 11:41:01 CET 2004 - lmb@suse.de - Fix at least the build on ppc64, x86_64 and ia64. ------------------------------------------------------------------- Mon Feb 16 16:11:29 CET 2004 - lmb@suse.de - Upgrade to drbd 0.7 - Reenable new & wonderful km_drbd package ------------------------------------------------------------------- Mon Jan 26 17:17:15 CET 2004 - ro@suse.de - comment out km_drbd package ------------------------------------------------------------------- Sat Jan 10 17:11:00 CET 2004 - adrian@suse.de - build as user ------------------------------------------------------------------- Wed Sep 10 16:14:31 CEST 2003 - lmb@suse.de - Fix some build failures on ppc64. - Honor CONFIG_DEBUGSYM for UML build. ------------------------------------------------------------------- Tue Aug 26 20:57:06 CEST 2003 - lmb@suse.de - No longer build the ja & pt docs. ------------------------------------------------------------------- Tue Aug 19 14:14:11 CEST 2003 - lmb@suse.de - Do apply the patch. ------------------------------------------------------------------- Mon Aug 18 19:34:57 CEST 2003 - lmb@suse.de - Fix distribution detection. ------------------------------------------------------------------- Mon Aug 18 17:59:34 CEST 2003 - lmb@suse.de - Added build fixes for building under UML. - Fix for unacked count << 0. ------------------------------------------------------------------- Thu Jul 31 03:30:59 CEST 2003 - lmb@suse.de - Upgrade to 0.6.6. ------------------------------------------------------------------- Fri Jul 25 14:16:50 CEST 2003 - schwab@suse.de - Respect INSTALL_MOD_PATH. ------------------------------------------------------------------- Wed Jun 11 11:20:05 CEST 2003 - kukuk@suse.de - Add all directories to filelist ------------------------------------------------------------------- Tue Jun 3 16:12:31 CEST 2003 - jg@suse.de - Update to 0.6.4, changes: - Reworked build system (i.e. better Makefiles) - SyncAll works forward insead of backwards. Improves performance on some storage controlers. - Reworked /etc/init.d/drbd script (i.e. better support of different bash releases) ------------------------------------------------------------------- Wed Mar 26 11:43:36 CET 2003 - jg@suse.de - Update to 0.6.3, changes: - Lockup of primary if secondary fails during resync. Fixed. (Stupid!) - Probabely SMP only deadlock in the drop-conection code path. - Improved connect code. (The old code could trap into a distributed deadlock, resulting in an endless connect/disconnect loop.) - The 'BitMap too small bug' was actually caused by a patch in SuSE's distribution kernel. This patch makes DRBD 'more' compatible with SuSE's kernel. - Improved code to allocate buffers for the rsynchronisation process. The old code allocated physical adjacent pages although the syncer does not need them! The old code could fail under high memory pressure. - Removed BitMap too small patch (is part of 0.6.3) - added /etc/ha.d/resource.d/datadisk to filelist so it is possible to install heartbeat after drbd - removed unneeded /etc/ha.d/resource.d/drbd-control ------------------------------------------------------------------- Mon Mar 17 11:27:40 CET 2003 - jg@suse.de - Added "BitMap too small" fix (Bug #25384) ------------------------------------------------------------------- Wed Feb 12 10:51:57 CET 2003 - jg@suse.de - Updated to 0.6.2 - SMP fix in drbd_dio_end_sec() - /etc/init.d/drbd knows about returncodes of fsck ------------------------------------------------------------------- Tue Dec 17 10:44:16 CET 2002 - jg@suse.de - Moved drbdsetup from /usr/sbin to /sbin to support /usr on nfs - Removed accidentialy included CVS directories from tar-file ------------------------------------------------------------------- Wed Dec 11 16:04:44 CET 2002 - jg@suse.de - Updated to 0.6.1 final ------------------------------------------------------------------- Mon Nov 11 11:26:13 CET 2002 - ro@suse.de - changed neededforbuild <jade_dsl> to <openjade> - changed neededforbuild <sp> to <opensp> ------------------------------------------------------------------- Wed Oct 2 14:23:53 CEST 2002 - jg@suse.de - Updated to 0.6.1-pre17, changes: - Merged syncer speedup code by Lars G. Ellenberg - Merged most of Lars' modifications to the ioctl interface - Marged the bug-fixes from the lge-branch - Implemented the TimoutCounter in the meta-data code. - Fixed a bug that could cause lockup of the primary node on SMP systems using a SCSI device for DRBD, it always happened during resynchronisation. (!) - Checking /.buildenv now in buildsystem instead of /etc/*-release ------------------------------------------------------------------- Tue Sep 3 18:18:48 CEST 2002 - jg@suse.de - Init script fixes: - Removed abortion on non existing block devices (may break LVM setups) - Sourcing . /etc/rc.status earlier now - Allowing execution via rcdrbd link ------------------------------------------------------------------- Mon Sep 2 22:09:22 CEST 2002 - jg@suse.de - Incorporated latest changes from CVS - Using lge branch now (syncer much faster) ------------------------------------------------------------------- Wed Aug 21 10:32:08 CEST 2002 - jg@suse.de - Fixed manpage generation (should now even build on ppc64) ------------------------------------------------------------------- Tue Aug 20 11:17:55 CEST 2002 - jg@suse.de - Added PreReq tag ------------------------------------------------------------------- Mon Aug 19 12:07:53 CEST 2002 - kukuk@suse.de - fix compilation on UL ------------------------------------------------------------------- Tue Aug 13 15:28:49 CEST 2002 - jg@suse.de - Added documentation stuff again - Modified init script to comply with LSB ------------------------------------------------------------------- Mon Aug 12 15:18:40 CEST 2002 - jg@suse.de - Updated to latest version from CVS repository - Removed temporary documentation path from Makefile (does not build) ------------------------------------------------------------------- Tue Mar 5 08:38:28 CET 2002 - jg@suse.de - Fixed broken specfile ------------------------------------------------------------------- Mon Mar 4 17:37:13 CET 2002 - jg@suse.de - updated to bugfix release 0.6.1pre10 - Data-corruption bug in SyncAll fixed (was introduced in pre9) - Fixed an OOPS in tl_check_sector() (was introduced in pre9) - Fixed Linux-2.2.x compability (was broken in pre9) - removed documentation patch (not needed anymore) ------------------------------------------------------------------- Wed Feb 20 18:14:04 CET 2002 - jg@suse.de - modified init script to honor inittimeout settings ------------------------------------------------------------------- Wed Feb 20 17:55:05 CET 2002 - jg@suse.de - added -include /usr/src/linux/include/linux/modversions.h to km_drbd Makefile in case CONFIG_MODVERSIONS is set - modified the init script to comply to LSB and to skip the "interactive" part on boot ------------------------------------------------------------------- Tue Feb 12 15:47:56 CET 2002 - jg@suse.de - added -DMODVERSION and -D__SMP__ to km_drbd Makefile (according to kernel configuration) ------------------------------------------------------------------- Fri Feb 1 00:26:06 CET 2002 - ro@suse.de - changed neededforbuild <libpng> to <libpng-devel-packages> ------------------------------------------------------------------- Tue Jan 29 18:26:07 CET 2002 - jg@suse.de - updated to 0.6.1-pre9 ------------------------------------------------------------------- Thu Dec 20 10:22:14 CET 2001 - jg@suse.de - replaced insserv call in specfile with respective macro ------------------------------------------------------------------- Wed Dec 19 21:01:42 CET 2001 - jg@suse.de - updated to 0.6.1-pre7 (supports now kernel 2.4) - removed insserv call after installing - removed fillup template - removed some outdated documentation files ------------------------------------------------------------------- Fri Jul 27 17:21:10 MEST 2001 - mt@suse.de - fixed init script to be LSB compliant ------------------------------------------------------------------- Fri Jul 20 12:06:42 CEST 2001 - kukuk@suse.de - changed neededforbuild <gs_fonts> to <ghostscript-fonts-std> - changed neededforbuild <gs_lib> to <ghostscript-library> - changed neededforbuild <gs_serv> to <ghostscript-serv> ------------------------------------------------------------------- Sun Jan 14 11:01:43 CET 2001 - mt@suse.de - added km_drbd subpackage with drbd kernel module source ------------------------------------------------------------------- Fri Dec 1 14:07:17 CET 2000 - mt@suse.de - added mkdir $RPM_BUILD_ROOT/sbin in spec ------------------------------------------------------------------- Fri Dec 1 10:43:41 CET 2000 - kukuk@suse.de - move sbin/init.d -> etc/init.d ------------------------------------------------------------------- Mon Nov 27 12:45:16 CET 2000 - mt@suse.de - fixed link src for rcdrbd in spec file - changed group to Applications/Clustering ------------------------------------------------------------------- Thu Nov 23 09:42:31 CET 2000 - mt@suse.de - removed heartbeat from neededforbuild ------------------------------------------------------------------- Wed Nov 22 13:40:05 CET 2000 - mt@suse.de - changed to LSB installation of run level links ------------------------------------------------------------------- Fri Nov 10 16:01:54 CET 2000 - mt@suse.de - no module build in spec - drbd module is patched into the kernel ------------------------------------------------------------------- Wed Nov 8 10:42:33 CET 2000 - mt@suse.de - new package
Locations
Projects
Search
Status Monitor
Help
OpenBuildService.org
Documentation
API Documentation
Code of Conduct
Contact
Support
@OBShq
Terms
openSUSE Build Service is sponsored by
The Open Build Service is an
openSUSE project
.
Sign Up
Log In
Places
Places
All Projects
Status Monitor
