File mstflint.changes of Package mstflint

Overview Repositories Revisions Requests Users Attributes Meta

File mstflint.changes of Package mstflint

-------------------------------------------------------------------
Fri Sep 30 12:11:40 UTC 2022 - Nicolas Morey-Chaisemartin <nmoreychaisemartin@suse.com>

- Update to v4.21.0-1 (jsc#PED-911, jsc#PED-1188)
  - Generic
    - Added support for NVIDIA ConnectX-7 adapter cards.
    - Added additional Flash support for ConnectX-4 Lx and ConnectX-5 adapter cards.
    - Python 2.x - Python 2.x is now end-of-life and no longer supported by MFT.
  - mstfwreset
    - For some configuration changes done using mstconfig, PCI rescan by the user is required.
    - Added a new reset-type ("NIC only reset") to mstfwreset which is applicable only
      to SmartNIC devices. The new reset-type is also the new default for SmartNIC devices.
      In case of reset-type is set to "NIC only reset", mstfwreset will not reset the internal host.
  - mstflint
    - Querying Vendor Specific Firmware Information from an Nvidia AOC / Transceiver Querying
      a firmware cable transceiver is now done using the "mstflint" tool.
    - cable/transceivers burning commands provide now validation and extract version from the image files.
    - Modified the output of the PCIe link information, removed the device status filed.
    - When downgrading to a firmware version that does not support the flash type of
      the device, mstflint will present the user a clear error of such scenario.
  - mlxconfig
    - Enable the users to apply token via MTUSB connected device.
  - mstresourceparse
    - mstresourceparse will present the union fields according to the selector.
     Unions that do not have a selector, will be presented with all the fields as before.
  - mstresourcedump
    - mstresourcedump tool now runs ~10X faster in mem mode with output to binary file.
    - Updated the "--virtual-hca-id" value output to be in a hexadecimal format.
    - Memory-Mode, data field is now transferred via memory instead of the resource-dump register.
  - mstlink
    - Removed irrelevant "eye" info fields in the output of the "show eye" command for PCIe links.
    - Removed the device status field from the PCIe info section.
    - Added support for "show_eye" command for ConnectX-7 over PCIe links.
    - Re-formatted the serdes Tx parameter layout in the "show_sedes_tx" command.
    - Added support for the PRBS test mode of Active/Optical CMIS modules.
    - Added support for additional configuration flags of the module control parameters.
    - Added support for new PRBS TX/RX patterns (--tx_prbs <tx_prbs_mode> & --rx_prbs <rx_prbs_mode>).
    - Added new show counters for 16nm devices. To see them run the "show_counter" command.
    - Extended the list of the cable information received for 16nm devices when running the "show_module" command.
    - Extended the information collection for 7nm and 16nm devices. See "--amber_collect" flag.
    - Extended the list of the cable information (LOL, LOS, FSM, and module status)
      for CMIS when running the "show_module" command.
  - mstdump
    - Added an optional parameter of the CSV path (-c | --csv)
     which loads the provides the CSV from a fixed location as a DB instead of the default one.
  - mstprivhost
    - Added a new flag to query all hosts status from the embedded Arm side for Multi-host systems.
- Refresh patches against latest sources:
  - Remove-date-time-info-from-build.patch
  - Fix-gcc7-and-gcc8.patch

-------------------------------------------------------------------
Wed Jul  7 11:31:14 UTC 2021 - Nicolas Morey-Chaisemartin <nmoreychaisemartin@suse.com>

- Update to v4.17.0-1 (jsc#SLE-19261)
  - Anti-rollback Protection
    - Enabled Anti-rollback protection to prevent old vulnerable firmware
      versions from being flashed to the device
  - mstlink tool
    - Added support for DSFP modules
  - Parallel Firmware Burning (DMA Burning)
    - Added support for parallel firmware burning.
- Refresh PIE.patch against latest sources

-------------------------------------------------------------------
Tue May 25 16:58:42 UTC 2021 - Wolfgang Frisch <wolfgang.frisch@suse.com>

- Link as position independent executables (bsc#1184124).
  - Added PIE.patch

-------------------------------------------------------------------
Wed Apr  7 11:52:58 UTC 2021 - Nicolas Morey-Chaisemartin <nmoreychaisemartin@suse.com>

- Update to v4.16.0-2
  - mstlink tool
      - Added support for PCIe eye grade scan
      - Enabled margin scan on Network links
      - Enabled querying the current host configuration using the "q | query" flag
  - mstconfig tool
      - fixed database
  - fixed several bugs
- Refresh patches against latest sources:
  - Remove-date-time-info-from-build.patch
  - Fix-gcc7-and-gcc8.patch
  - fix-race-condition-during-install.patch

-------------------------------------------------------------------
Wed Sep 23 07:55:04 UTC 2020 - Nicolas Morey-Chaisemartin <nmoreychaisemartin@suse.com>

- Update to v4.15.0-1 (jsc#SLE-15968)
  - New Supported Devices
    - ConnectX-6Lx adapter cards support.
    - BlueField-2 adapter cards support.
  - mstconfig tool
    - QOS ets configuration ConnectX-4 LX 25NIC failed when enabled VFs > 21
    - Network programmability (Dynamic Flex Parse) Packet classification on
      eCPRI header on receive with DPDK
    - Improved BlueField NVMf Performance when working in 4K block size
        [BlueField SmartNIC] Support full virtio-net PCI device emulation +
		Device Hot Plug - BareMetal case GA
    - ConnectX-6 SHARPv2 to achieve line-rate performance
    - New Feature - BOOT_INTERRUPT_DIS parameter was added to mlxconfig.
      When TRUE, legacy interrupts should not be used for receive/transmit indication.
      Polling should be used instead.
  - mstdump tool
    - Fixed an issue that caused mstflint to print garbage messages.
      To fix the bug, the new kernel module should be recompiled and loaded
  - mstreg tool
        [software steering, ASAP^2, Connection Tracking] adding DP_HASH support
    - Virtual output Queuing - exposing descriptors
    - New Feature - Increased the registry keys the tool supports and now it exposes the full PRM.
    - For additional information, refer to the PRM.
  - mstlink tool
    - need mstlink to support TX SerDes set --database at Quantum and Spectrum-2
    - QSFP DD + CMIS
    - mstlink - support for 400G
    - mstlink to enforce PRBS at host-management and/ or multi-host systems
    - mstlink - add support to configure PRBS
    - Read/Write SerDes Tx taps with new SLTP register - mstlink
    - Fix the return bad status of SLTP according to the new return values
    - New Feature - HDR lane rate is now supported when in Pseudorandom Binary Sequence (PRBS) mode.
    - New Feature - Added support for switching between NRZ/PAM4 speeds for new devices that support
    - HDR/200G speeds (ConnectX-6, ConnectX-6 Dx, Mellanox Quantum, Mellanox Spectrum 2).
  - mstfwreset tool
    - handling mstfwreset on SN in different modes
  - mstflint tool
        [Secure Boot][BlueField-2] EFUSE keys burn tool (Arm OS) for RSA Keys and MKEK
    - Support HPCC in CX6Dx
    - Add life cycle, secure boot, recovery indications to the flint query full command
    - New Feature - Enables the user to insert information manually to the flash on components
      such as MFG/DEV GUID/MAC when no information exists after the burn process using the command
        "mstflint -d \<device\> sg \<guid\>".
      If the information is not inserted manually, the existing GUID/MAC
    - information will be used instead.
    - New Feature - Enables the user to query the MFA2 file using a PSID.
  - mstresourcedump tool
    - MSTResoruceDump new tool: Build a dump passer tool for parsing resource dumps
    - Added support for "--virtual-hca-id" command. Now the tool can provide info on the virtual HCA
        (host channel adapter, NIC) ID.

-------------------------------------------------------------------
Fri Jan 24 15:03:35 UTC 2020 - Nicolas Morey-Chaisemartin <nmoreychaisemartin@suse.com>

- Update to v4.13.3-2
  - ConnectX-6DX adapter cards GA support.
  - mstflint tool
    - New feature - Burning MFA2 images. Enables the user to extract (i.e. unzip)
      4MB images from MFA2 archive, that matches the device type and device PSIB.
    - New feature - Verifying MFA2 Archive. Enables the user to verify a given MFA2
      archive contains the image that matches the given device.
    - New feature - Verifying firmware image on a device which operates in livefish mode by
      comparing it with an existing binary firmware file.
    - Added image-reactivation feature which re-assigns the image signature to the
      previous image (in case the new image is faulty) enabling "fwreset" functionality
      or to burn a new image.
  - mstresourcedump tool
    - New mstresourcedump tool added to extracts and prints data segments generated
      by the firmware. The dump output is used by Mellanox for debug and troubleshooting.
  - mstfwreset tool
    - Added support for Socket Direct devices in the mstfwreset tool.
    - Added save/restore ATS PCIE capability.
    - Added support for Live-Patch in ConnectX-5.
    - Added a new reset option (reset-type) to the reset command of mstfwreset.
      The user can see the supported reset-types by using the query command.
  - mstlink tool
    - New feature - Using --json flag formats the output of the tool including all
      options & commands in JSON format and prints it.
    - Added support for reading the "Link Downed Counter" and "Link Error Recovery Counter"
      in the mstlink utility when using InfiniBand protocol only.
    - Added support for HDR PCIe grades in the EYE Opening Info in the mstlink utility.
    - Added a new flag (show links) to define the valid PCIe links.
    - Displays and configures port related data at the physical layer.
  - mstconfig tool
    - Added the ATS_ENABLED TLV param. When set to TRUE, the device will support Address
      Translation Service (ATS).
    - Added the VF_VPD_ENABLE parameter to mstconfig. When set, the VPD capability
      is exposed to Virtual Functions.
  - mstarchive tool
    - Added support for MFA2 query using the mstarchive tool.
  - mstfwtrace tool
    - Extracts and prints trace messages generated by the firmware of 5th generation devices.
      This tool supports secure firmware flow only.
  - mstreg tool
    - Exposes supported access registers, and allows users to obtain information
      regarding the registers fields and attributes, and to set and get data with
      a specific register.
  - mstfwmanager tool
    - Supports listing the contents of images archive. When running this command the tool
      will list all firmware images within this PLDM package for each image it displays.

-------------------------------------------------------------------
Thu Sep  5 14:30:48 UTC 2019 - Nicolas Morey-Chaisemartin <nmoreychaisemartin@suse.com>

- Update to v4.11.0-5 (bsc#1136328)
  - Build related changes
    - Disabled -Werror compiler flag
    - Added the option to choose local system libraries if available in the machine
    - Enhanced python 3 compatibility
    - Removed python shebangs from the scripts
    - Fixed multiple rpmbuild issues
    - Added --enable-all-static configure flag that allows compilation of static executables, when the the option is supported by the compiler
    - All python scripts were aligned to unix encoding
    - Fixed multiple builds and compilation issues
  - mstprivhost tool
    - Added mstprivhost tool to set host privilege configurations
  - mstflint tool
    - Added missing Rom info attribute for legacy FW qq query
    - Fixed query timeout when device is locked
    - Renamed former --next_boot_fw_ver to --flashed_version flag. This flag queries the flashed version.
    - Note that the previous flag is supported to keep compatibility.
    - Fixed an issue with FW upgrade on ConnectX-5 EN
  - mstregdup tool
    - Fixed segfault
  - mstconfig
    - Added new params:
  - mstfwtrace
    - Added fwtracer: in this release, this tool supports secure FW flow only
  - libibmad
    - Added support for libibmad 12 in addition to 5
  - Python tools
    - Fixed Python wrapper to work properly in multiple OSes and multiple Python versions
  - Added adb generic tools
    - Added mstreg tool: To enable this option please use "--enable-adb-genaric-tools" flag
  - mstarchive
    - Added return values
    - Fixed an issue in the MFA2's header minor and subminor versions
- Drop patches that were fixed upstream:
  - Add-armv6-and-armv7-support.patch
  - Add-s390-s390x-support.patch
- Refresh patchest against latest sources:
  - Fix-gcc7-and-gcc8.patch
  - Remove-date-time-info-from-build.patch
  - fix-race-condition-during-install.patch

-------------------------------------------------------------------
Fri Mar 29 07:54:57 UTC 2019 - Nicolas Morey-Chaisemartin <nmoreychaisemartin@suse.com>

- Add missing python helpers to the package (bsc#1103497)

-------------------------------------------------------------------
Wed Feb 13 13:11:34 UTC 2019 - nmoreychaisemartin@suse.com

- Update to v4.11.0-3 (bsc#1103497)
  - Added option to query only flashed FW version, which reduces the CPU usage during the query.
    To use this option you should use "--next_boot_fw_ver" flag.
  - Fixed issue of missing information during query.
  - Added support for python 3.
  - Added option to reduce cpu utilization with "--low_cpu" flag.
  - Added compatibility to 1.1.X version, in addition to previously supported 1.0.2 version.
  - Added support for Mellanox Quantum switch systems and
    ConnectX-6 Ready adapter cards.
  - mstarchive tool
    The mstarchive tool allows the user to create a file with the mfa2 extension.
    The new file contains several binary files of a given firmware for
    different adapter cards.
  - mstprivhost
    The ability to restrict the hosts from configuring the NIC.
    Meaning, only the Arm side will have the privilege to configure the NIC.
    Note: This utility is supported in BlueField devices only.
  - mstconfig in BlueField
    Enables the user to manage (grand/restrict) mlxconfig configuration
    privileges for BlueField Arm systems.
- Refresh patchest against latest sources:
  - Add-armv6-and-armv7-support.patch
  - Add-s390-s390x-support.patch
  - Fix-gcc7-and-gcc8.patch
  - Remove-date-time-info-from-build.patch
  - fix-race-condition-during-install.patch
- Drop Fixed-licenses-of-files.patch as it was merged upstream

-------------------------------------------------------------------
Mon Nov 19 07:52:54 UTC 2018 - nmoreychaisemartin@suse.com

- Add Fixed-licenses-of-files.patch from upstream that
  fixes license issues (bsc#1086923)

-------------------------------------------------------------------
Mon Oct 15 07:35:36 UTC 2018 - nmoreychaisemartin@suse.com

- Update to v4.10.0-3 (fate#325998)
  - Added mstcongestion 
- Add fix-race-condition-during-install.patch
  to fix install on parallel builds

-------------------------------------------------------------------
Tue Jul 31 07:45:02 UTC 2018 - nmoreychaisemartin@suse.com

- Update to v4.10.0-2
  - mstfwreset not supported
  - mstflint now handles all the burn parameters when MCC
    is enabled and displays the secure-FW CS tokens.
  - mstconfig
    - Added the option to query partial parameters
    - Added the following new parameters:
        FLEX_PARSER_PROFILE_ENABLE
        ECPF_ESWITCH_MANAGER
        ECPF_PAGE_SUPPLIER
        SAFE_MODE_ENABLE
        SAFE_MODE_THERSHOLD
        BOOT_UNDI_NETWORK_WAIT
  - Fixed bug in firmware burning flow
- Refresh patchest against latest sources:
  - Remove-date-time-info-from-build.patch
  - Add-s390-s390x-support.patch
  - Add-armv6-and-armv7-support.patch
  - Fix-gcc7-and-gcc8.patch

-------------------------------------------------------------------
Mon Jun 18 06:31:30 UTC 2018 - nmoreychaisemartin@suse.com

- Update patches to fit science:HPC worflow
  - Remove old format patches
    - mstflint-4.4.0-implicit-declaration.patch
    - mstflint-4.4.0-no-date-time.patch
    - mstflint-armv6_arch.patch
    - mstflint-armv7_arch.patch
    - mstflint-gcc7.patch
    - mstflint-s390_arch.patch
  - Replaced with new format patches
    - Remove-date-time-info-from-build.patch
    - Add-s390-s390x-support.patch
    - Add-armv6-and-armv7-support.patch
    - Fix-gcc7-and-gcc8.patch
      - Patch was updated to also fix Gcc8 compilation issues
  - Drop obsolete patch
    - mstfint-mtcr_ul_no_static_lib.patch
- Update to v4.9.0-3
  - No release notes available

-------------------------------------------------------------------
Sun Mar 25 11:17:55 UTC 2018 - kasimir_@outlook.de

- Add mstflint-armv6_arch.patch to support build on armv6l

-------------------------------------------------------------------
Tue Mar 20 07:44:34 UTC 2018 - nmoreychaisemartin@suse.com

- Update to v4.9.0-1
  * mstfwreset
    * Added support for a hot swap (or hot plug) of the PCIe slot.
  * Secure Firmware Update
    * Added support for Secure Firmware Update to ConnectX-4 adapter cards.
    * Enabled signing the package with an RSA 4096 bit keys.
    * Added support for setting the GUIDs when Secure Firmware Update is enabled.
  * mstconfig
    * Added the following mstconfig configuration parameters:
      * AUTO_RELOAD
      * DRIVER_SETTINGS
      * EXP_ROM_PXE_ENABLE
      * EXP_ROM_UEFI_ARM_ENABLE
      * EXP_ROM_UEFI_X86_ENABLE
      * INTERNAL_CPU_MODEL
      * IPV4
      * IPV6
      * PCI_DATA_WR_ORDERING_MODE
      * PXE_UNDI
      * STATUS_UPDATE
      * TCP
      * TCPIP
      * TRACER_ENABLE
  * mstflint
    * Added support for FreeBSD with BSD license.
  * Secure Boot
    * Added support for secure boot to ConnectX-3 adapter cards.

-------------------------------------------------------------------
Thu Nov  9 11:19:43 UTC 2017 - nmoreychaisemartin@suse.com

- Update to v4.8.0-2
  * Drop proprietary Mellanox file

-------------------------------------------------------------------
Tue Oct 31 12:32:47 UTC 2017 - nmoreychaisemartin@suse.com

- Update to v4.8.0-1, No info of changes available (bsc#1046293, fate#322949)
- Update mstflint-gcc7.patch to the latest sources

-------------------------------------------------------------------
Wed Aug  9 15:36:35 UTC 2017 - nmoreychaisemartin@suse.com

- Update to v4.7.0-1, No info of changes available

-------------------------------------------------------------------
Fri Jun 23 15:40:51 UTC 2017 - nmoreychaisemartin@suse.com

- Replace dependency from libibmad-devel to infiniband-diags-devel

-------------------------------------------------------------------
Tue May 30 12:21:38 UTC 2017 - nmoreychaisemartin@suse.com

- Add mstflint-gcc7.patch for GCC7 support

-------------------------------------------------------------------
Thu May 18 05:54:00 UTC 2017 - nmoreychaisemartin@suse.com

- Add mstflint-armv7_arch.patch to support build on armv7l
- Adapt mstflint-s390_arch.patch to work with s390 and s390x

-------------------------------------------------------------------
Fri Mar 31 11:21:24 UTC 2017 - nmoreychaisemartin@suse.com

- Update to v4.6.0-1, No info of changes available (fate#321683).
- Adapt patches to changed sources.
- Support build outside of SCM.

-------------------------------------------------------------------
Mon Mar 20 12:04:43 CET 2017 - pth@suse.de

- Update to 4.5.0-1.17.g8a0c39d, No info of changes available
  (fate#321683).
- Adapt mstflint-s390_arch.patch to changed sources.
- Remove mstflint-4.4.0-gcc6.patch as it isn't needed anymore.

-------------------------------------------------------------------
Wed Jun 29 17:36:04 UTC 2016 - i@marguerite.su

- update version 4.4.0
- drop patch: mstflint-autotools.patch, not needed
- drop patch: mstflint-no_Werror.patch, not needed
- add patch: mstflint-4.4.0-gcc6.patch
  * fix boo#985145
  * fix unable to find string literal operator
- add patch: mstflint-4.4.0-implicit-declaration.patch
  * fix implicit declaration of mset_cr_access
  * neither mset_cr_access or MST_MLNXOS exists
- add patch: mstflint-4.4.0-no-date-time.patch
  * fix file-contains-date-and-time

-------------------------------------------------------------------
Mon Feb 22 10:35:49 CET 2016 - pth@suse.de

- Add mstflint-common_int_handling.patch to fix integer types handling
  and use common code instead of duplication. This creates two new
  headers, int_handling.h and tools_arch.h. The former has the type
  and print formatting code common to all files.
- Use date and time of .changes file to avoid useless rebuilds.

-------------------------------------------------------------------
Thu Feb 18 14:39:47 CET 2016 - pth@suse.de

- Update to 4.3.0 git 9b9af70 (fate#320235 bsc#66196).
- Remove mstflint-autotools.patch as it's not needed anymore.
- Generate ChangeLog from git log and include it.
- Refresh and fix mstflint-s390_arch.patch to apply cleanly.
- Build with Checksums enabled.
- Add placeholder man pages from Debian.

-------------------------------------------------------------------
Sun Mar  8 10:46:01 UTC 2015 - p.drouand@gmail.com

- Update to version 4.0.0
  * No changelog available
- Use download Url as source
- Update mstflint-autotools.patch

-------------------------------------------------------------------
Fri Aug  8 19:27:26 CEST 2014 - pth@suse.de

- Rename mstfint-mtcr_ul_no_static_lib to mstfint-mtcr_ul_no_static_lib.patch
  and include the patch for building and using a dynamic library
  as a source.

-------------------------------------------------------------------
Thu Jul 24 16:42:27 CEST 2014 - pth@suse.de

- Don't install header and library and thus the devel package can
  be removed.

-------------------------------------------------------------------
Tue Jun  3 11:24:34 CEST 2014 - pth@suse.de

- Update to OFED 3.12 final.

-------------------------------------------------------------------
Fri May 16 13:50:49 CEST 2014 - pth@suse.de

- Fix mstflint-s390_arch.patch to cover all new cases where
  architecture is checked.
- Add mstflint-no_Werror.patch because currently there are
  warnings where printf formats don't match passed vars.

-------------------------------------------------------------------
Wed May 14 04:19:49 CEST 2014 - pth@suse.de

- Update to 3.6.0 from OFED 3.12 RC2.
- Remove patches as the code was fixed upstream:
  mstflint-fix_type-punning.patch
  aarch64-arch-detection.diff
- Adapt mstflint-s390_arch.patch to the new code.
- Remove mstflint-shared_lib.patch as it causes more work with
  few gains.

-------------------------------------------------------------------
Tue Apr 22 16:22:50 CEST 2014 - pth@suse.de

- Add all defines needed for s390.

-------------------------------------------------------------------
Tue Mar  4 12:52:48 CET 2014 - pth@suse.de

- Fix mstflint-s390_arch.patch so that it applies.

-------------------------------------------------------------------
Mon Mar  3 17:25:46 CET 2014 - pth@suse.de

- Add all necessary defines or s390x (mstflint-s390_arch.patch).

-------------------------------------------------------------------
Mon Feb 10 20:35:40 UTC 2014 - dmueller@suse.com

- add aarch64-arch-detection.diff: Fix aarch64 detection

-------------------------------------------------------------------
Mon Feb  3 13:23:02 CET 2014 - pth@suse.de

- Update to latest 3.5.0. No change log in package.
- Specify full source URL.
- Use spdx.org format for license specification
- Add mstflint-autotools.patch that modifies configure.ac so
  that autoreconf can run successfully.
- Remove configure.in as configure.ac is present.
- Create devel subpackage.
- Add mstflint-fix_type-punning.patch that fixes all cases of
  type-punning by using memcpy.
- Add COPYING and LICENSE to documentation.

-------------------------------------------------------------------
Fri Dec  7 19:19:48 CET 2012 - pth@suse.de

- Update to from OFED 1.5.4.1 (fate#314255)
- Remove patches that were integrated:
  mstflint-includefix.patch
  mstflint-1.4-0.6.g63179f4-connectX3.diff

-------------------------------------------------------------------
Tue Jan 10 10:21:38 UTC 2012 - stefan.fent@suse.com

- Add Connect X3 support (bnc #732326)

-------------------------------------------------------------------
Thu Oct 28 16:37:49 UTC 2010 - jjolly@novell.com

- Update to v1.4--0.6.g63179f4 from OFED 1.5.2
- Refreshed include error patch

-------------------------------------------------------------------
Thu Dec 11 22:52:53 CET 2008 - jjolly@suse.de

- Updated to package from OFED 1.4 GA
  - Added hca_self_test.ofed installation

-------------------------------------------------------------------
Tue Oct 28 08:23:16 CET 2008 - jjolly@suse.de

- Updated to v1.4 from OFED 1.3 rc3

-------------------------------------------------------------------
Mon Oct 27 23:07:12 CET 2008 - ro@suse.de

- fix build

-------------------------------------------------------------------
Fri Sep 12 08:37:19 CEST 2008 - jjolly@suse.de

- Updated to v1.3 from OFED 1.4 RC1

-------------------------------------------------------------------
Tue Aug  7 12:16:05 CEST 2007 - hvogel@suse.de

- Update to version from OFED 1.2c

-------------------------------------------------------------------
Thu Jul 12 14:39:12 CEST 2007 - hvogel@suse.de

- package include/mtcr.h

-------------------------------------------------------------------
Wed Jul  4 12:04:03 CEST 2007 - hvogel@suse.de

- Add GPL COPYING file [#288876]

-------------------------------------------------------------------
Tue Jul  3 13:33:43 CEST 2007 - hvogel@suse.de

- Use correct git checkout from OFED 1.2

-------------------------------------------------------------------
Wed Jun 20 17:40:25 CEST 2007 - hvogel@suse.de

- Initial Package, Version 1.2

Places

File mstflint.changes of Package mstflint

Places