File sysvinit.changes of Package sysvinit

Overview Repositories Revisions Requests Users Attributes Meta

File sysvinit.changes of Package sysvinit (Revision 23029d32872400c81700c9f9f2166169)

Currently displaying revision 23029d32872400c81700c9f9f2166169 , Show latest

-------------------------------------------------------------------
Tue Oct 22 12:08:16 UTC 2024 - Dr. Werner Fink <werner@suse.de>

- Update to sysvinit 3.11
  * Some escape characters were included in the inittab manual page,
    but not displayed by the "man" command because they were not
    (ironically) properly escaped. This has been fixed.
  * Enabled chaining commands together in the inittab file. This
    allows the admin to run commands like
    "task1 && task2" or "task2 || task2" from the inittab file.
  * Fix typoes in halt manual page. Fixes provided by Bjarni Ingi Gislason.
  * Fix typos/markdown in fstab-decode manual page.
    Patch provided by Bjarni Ingi Gislason.

-------------------------------------------------------------------
Tue Aug 13 07:21:04 UTC 2024 - Dr. Werner Fink <werner@suse.de>

- Add patch killproc-2.23.dif
  * Fix shell command in Makefile to get detection statx declaration correct

-------------------------------------------------------------------
Tue Aug 13 06:52:02 UTC 2024 - Dr. Werner Fink <werner@suse.de>

- Update to sysvinit 3.10
  *  When the user executes "machinectl stop", systemd sends SIGRTMIN+4 to PID 1 
     in the container, and expects that to initiate a graceful shutdown (power-off).
     SysV init now catches this signal and initiates a shutdown (shutdown -hP now).
     - floppym provided patch to accomplish this.
  * Fix issue in bootlogd which could cause the service to enter an endless loop
    (and use too much CPU) when it is able to open a device for writing, but not actually
    able to write to it. This resulted in bootlogd closing and re-opening the device over
    and over. Now bootlogd should simply fail gracefully when it cannot write to an open
    file/device.
  * Fix formatting in shutdown.8 manual page. Cleaned up whitespace and special characters.
  * Patch for man/Makefile to fix the clean recipe.
    Provided by Lucas Nussabaum and Mark Hindley
  * On Linux systems, allow reboot command to pass a message
    to the system firmware during the restart. This is
    accomplished with the -m flag.
  * Patch from kraj which allows hddown to compile
    when musl is the C library.

-------------------------------------------------------------------
Mon Feb 26 13:28:43 UTC 2024 - Dominique Leuenberger <dimstar@opensuse.org>

- Use %patch -P N instead of deprecated %patchN.

-------------------------------------------------------------------
Fri Aug 18 13:03:53 UTC 2023 - Dr. Werner Fink <werner@suse.de>

- Update to sysvinit 3.08
  * For OpenSUSE only cosmetic change which is support of kexec
    for SysVinit reboot (not installed at all)

-------------------------------------------------------------------
Fri May 12 12:08:37 UTC 2023 - Dr. Werner Fink <werner@suse.de>

- Update to sysvinit 3.07
  * Fixed killall5 so that processes in the omit list are
    not sent any signals, including SIGSTOP.
  * Fixed usage message for killall5 to be more accurate.
  * pidof was not returning PIDs of programs which were launched
    using a symbolic link. (ie /tmp/sleep when /tmp/sleep links to /usr/bin/sleep).
    This is now fixed as we check both the realpath and symbolic path for processes.
    In other words, "pidof /tmp/sleep" and "pidof /usr/bin/sleep" will return
    the same PIDs when /tmp/sleep is a symbolic link to /usr/bin/sleep.
  * Fixed memory initialization error in pidof. Fix provided by Markus Fischer.
  * Accepted patch from Mark Hindley  which avoids clearing realpath information
    in pidof when trying to find matching executables.
  * Mark Hindley fixed typo in es.po
  * Mark Hindley cleaned up translation code in src/Makefile. 
  * Drop sulogin from Debian build. Removed libcrypt-dev dependency.
  * Fixed pt translation pages which were failing due to mis-matched
    open/close tags.
  * Makefile now respects ROOT prefix when setting up pidof-to-killall5
    symbolic link.
  * Removed redundant translation files from man directory.
  * Makefile now respects DESTDIR. User can specify either ROOT= or DESTDIR=
    to set install prefix.
  * Helge Kreutzmann provided updated Makefile for
    translation of manual pages. This has been added
    to the man directory.
  * Added sys/sysmacros.h include in mountpoint.c to fix
    compiler errors on systems where major/minor macros were not defined.
  * Applied patches from Mark Hindley to clean up man page
    Makefile, translations and installs of new man pages.
  * Remove reliance on linux/fs.h as it conflicts with glibc 2.36.
    Patch provided by lucascars.
  * Mark Hindley supplied patch to make bootlogd compile
    on GNU Hurd systems. Was missing major/minor macro.
  * Fixed formatting in init.8 man page.
    Patch provided by Mark Hindley.
  * Added q and Q flags to synopsis in shutdown manual page.
  * Applied fixes for markup and spacing in manual pages.
    Patch provided by Mario Blattermann.
  * Added translation framework (po4a) from Mario Blttermann.
  * Added Makefile for man/ directory. Will handle translations
    and substitutions.
  * Applied new translations for multiple languages from Mario Blattermann.
  * Added ability to use "@" symbol in command named in the inittab file. This
    treats commands as literal and does not launch a shell to interpret them.
  * Updated inittab manual page to include overview of symbols which trigger
    a shell interpretor and how to disable them using the @ symbol.
  * Introduced change which adds error checking in bootlogd when performing
    chdir(). - Provided by Alexander Vickberg 
  * Add check for console using TIOCGDEV on Linux systems in bootlogd to
    make finding console more robust. - Provided by Alexander Vickberg
  * Default to showing processes in the uninterruptable state (D).
    The -z flag no longer affects whether processes in D state are shown.
    The -z flag does still toggle whether zombie (Z) processes are shown.
  * Removed unnecessary check which is always true from init tab parsing.
- Port patches
  * sysvinit-2.88dsf-suse.patch
  * sysvinit-2.90-no-kill.patch
  * sysvinit-2.90.dif
- Add keyring as well as signature for source tar ball of sysvinit

-------------------------------------------------------------------
Thu May  4 16:57:57 UTC 2023 - Dirk Müller <dmueller@suse.com>

- split package from powerd. powerd patches that were never
  part of sysvinit but need to be mentioned to pass the bot checks:
  * powerd-2.0.2-getaddrinfo.patch 
  * powerd-2.0.2.dif

-------------------------------------------------------------------
Wed Jan  4 11:13:37 UTC 2023 - Ludwig Nussel <lnussel@suse.com>

- Replace transitional %usrmerged macro with regular version check (boo#1206798)

-------------------------------------------------------------------
Sat May  7 12:20:53 UTC 2022 - Marcus Meissner <meissner@suse.com>

- switch to https source urls

-------------------------------------------------------------------
Tue Sep 21 07:17:20 UTC 2021 - Dr. Werner Fink <werner@suse.de>

- Update to sysvinit 3.00:
  * Better device detection of bootlogd

-------------------------------------------------------------------
Wed Mar 31 08:13:57 UTC 2021 - Dr. Werner Fink <werner@suse.de>

- (re)add also support for SLE-15-SP3

-------------------------------------------------------------------
Mon Feb 22 16:00:28 UTC 2021 - Dr. Werner Fink <werner@suse.de>

- Update to sysvinit 2.99:
  * Mostly typo and just better documentation and easier to read
    code comments

-------------------------------------------------------------------
Wed Nov 25 15:04:42 UTC 2020 - Ludwig Nussel <lnussel@suse.de>

- prepare usrmerge (boo#1029961)

-------------------------------------------------------------------
Tue Nov 17 11:26:22 UTC 2020 - Dr. Werner Fink <werner@suse.de>

- Update to sysvinit 2.98:
  * Fixed time parsing in shutdown when there is a + in front of a 0 time offset.
    Commands with a postiive time offset (+1) would work but +0 fails.
    This has been corrected by Arkadiusz Miskiewicz.

-------------------------------------------------------------------
Wed Aug 26 12:42:23 UTC 2020 - Dominique Leuenberger <dimstar@opensuse.org>

- Drop /bin/pidof and /sbin/pidof, including corresponding man
  page: let's switch to pidof as provided by procps-ng.

-------------------------------------------------------------------
Tue Aug 25 14:45:33 UTC 2020 - Dominique Leuenberger <dimstar@opensuse.org>

- Update to sysvinit 2.97:
  * Check $(ROOT) filesystem for libcrypt instead of a hardcoded
    path to /usr.
  * Code clean-up and making sure we avoid freeing unused memory.
  * Added shell script which converts systemd unit files into
    init.d style scripts.
  * Allow init to load configuration data from files stored in
    /etc/inittab.d/
  * Allow shutdown time to be specified in the format +hh:mm. This
    is in addition to the existing formats such as hh:mm, +m, and
    "now".
  * Fixed typos in manual pages.
- Update startpar to 0.65:
  + Make sure startpar testsuite can find insserv executable in
    /usr/sbin or /sbin.
  + Added PREFIX variable to Makefile and testsuite to make
    location of startpar and insserv more flexible.
- Rebase sysvinit-2.90.dif.
- Drop SCVER defines: not used in any place.
- Drop startpar-sysmacros.patch: fixed upstream.

-------------------------------------------------------------------
Wed Sep 18 07:45:38 UTC 2019 - Dr. Werner Fink <werner@suse.de>

- Update to sysvinit 2.96
  * Added -z command line paramter to pidof which tells pidof to
    try to find processes in uninterruptable (D) or zombie (Z) states.
    This can cause pidof to hang, but produces a more complete process
    list.
  * Reformatted init code to make if/while logic more clear.
  * Make sure src/Makefile cleans up all executable files
    when parent Makefile calls "make clean".

-------------------------------------------------------------------
Thu Aug 29 13:25:34 UTC 2019 - Dr. Werner Fink <werner@suse.de>

- Update to killproc 2.23
  * killproc has its upstream at https://github.com/bitstreamout/killproc
  * Use new system call statx(2) to replace old stat(2)/lstat(2)
- Remove patches now upstream:
  * killproc-2.18-open_flags.dif
  * killproc-2.21.dif
  * killproc-sysmacros.patch
  * killproc-mntinf-optional.patch

-------------------------------------------------------------------
Fri Jun 21 07:20:38 UTC 2019 - Dr. Werner Fink <werner@suse.de>

- Remove logsave as well as the manual page as those as part of
  package e2fsprogs already

-------------------------------------------------------------------
Mon Jun 17 13:54:35 UTC 2019 - Dr. Werner Fink <werner@suse.de>

- Update to sysvinit 2.95
  * new logsave helper
- Update to startpar-0.63
  * move startpar from /sbin to /bin
- Port our patches
  * startpar-0.58.dif
  * sysvinit-2.88dsf-suse.patch
  * sysvinit-2.90-no-kill.patch
  * sysvinit-2.90.dif

-------------------------------------------------------------------
Tue Apr  9 13:13:42 UTC 2019 - Dr. Werner Fink <werner@suse.de>

- Add patch killproc-mntinf-optional.patch to handle various optional
  fields of /proc/<pid>/mountinfo on the entry/ies before the hypen
  (bsc#1131982)

-------------------------------------------------------------------
Mon Aug  6 13:21:20 UTC 2018 - werner@suse.de

- Update to sysvinit 2.90 
- Remove now upstream patches
  * sysvinit-2.88+dsf-dostat.patch
  * sysvinit-2.88+dsf-sulogin.diff
  * sysvinit-2.88+dsf.tar.bz2
  * sysvinit-2.88dsf-scripts2.patch
- Port our patches
  sysvinit-2.88dsf-no-kill.patch becomes sysvinit-2.90-no-kill.patch
  sysvinit-2.88+dsf.dif becomes sysvinit-2.90.dif

-------------------------------------------------------------------
Wed Aug  1 14:50:54 UTC 2018 - schwab@suse.de

- killproc-sysmacros.patch, startpar-sysmacros.patch: Include
  <sys/sysmacros.h> for makedev

-------------------------------------------------------------------
Thu May 24 10:30:28 CEST 2018 - kukuk@suse.de

- Use %license instead of %doc [bsc#1082318]

-------------------------------------------------------------------
Tue Oct  4 13:31:43 UTC 2016 - werner@suse.de

- Avoid spurious waring on a not existin session of a not existing
  process (boo#1002492)

-------------------------------------------------------------------
Tue Jan 26 10:24:25 UTC 2016 - sweet_f_a@gmx.de

- remove unused /etc/pam.d/init
- remove notify-pam-dead.patch

-------------------------------------------------------------------
Mon Jan 25 15:46:22 UTC 2016 - werner@suse.de

- Use libblogger of package blog-devel now

-------------------------------------------------------------------
Thu Jan 21 11:35:01 UTC 2016 - werner@suse.de

- Split off showconsole as its separate package called blog 
  Moved also the patches: showconsole-1.16.dif, showconsole-1.16-deadlock.diff,
  showconsole-1.16-glibc.dif

-------------------------------------------------------------------
Fri Dec  4 15:24:01 UTC 2015 - sweet_f_a@gmx.de

- cleanup package:
  * don't build binaries which are not installed
  * remove unused sources
  * remove patches (or parts of patches) which modify unused files
  * remove old build conditions (sysvinit, util-linux, mkinitrd)
  * remove unused dependencies
- this cleanup does not change the resulting binaries (except some
  package dependencies) 
- list of removed patches:
  * sysvinit-2.82-startstop.patch
  * sysvinit-2.88+dsf-blowfish.dif
  * sysvinit-2.88+dsf-crypt.patch
  * sysvinit-2.88+dsf-env.patch
  * sysvinit-2.88dsf-multiple-sulogin.patch
  * sysvinit-2.88+dsf-run.diff
  * sysvinit-2.88+dsf-xen.patch
- list of modified patches:
  * notify-pam-dead.patch
  * sysvinit-2.88+dsf.dif
  * sysvinit-2.88+dsf-sulogin.diff
  * sysvinit-2.88dsf-suse.patch

-------------------------------------------------------------------
Tue Dec  1 10:48:20 UTC 2015 - sweet_f_a@gmx.de

- don't install last, we will take it from util-linux

-------------------------------------------------------------------
Mon Feb 23 09:30:00 UTC 2015 - rguenther@suse.com

- Build with -std=gnu89 to deal with GCC 5 defaulting to -std=gnu11

-------------------------------------------------------------------
Mon Sep  8 10:31:48 UTC 2014 - werner@suse.de

- For systemd distributions and products do not build the package
  sysvinit anymore

-------------------------------------------------------------------
Thu Aug 21 11:38:06 UTC 2014 - lnussel@suse.de

- use systemd-rpm-macros instead of systemd-devel to avoid build
  dependency on systemd and it's deps in turn
- don't install mkinitrd stuff on > 131 anymore

-------------------------------------------------------------------
Wed May 28 07:11:58 UTC 2014 - werner@suse.de

- The former entry adds the patch killproc-2.18-open_flags.dif (bnc#863518)

-------------------------------------------------------------------
Wed May 21 13:49:37 CEST 2014 - draht@suse.de

- open("/dev/tty", ...) should use O_RDWR, not O_WRONLY. Otherwise,
  after dup2(fd, 0);, a process cannot read from stdin. [bnc#863518]

-------------------------------------------------------------------
Fri Feb  7 15:42:34 UTC 2014 - werner@suse.de

- Add patch sysvinit-2.88+dsf-xen.patch to enable sulogin to find
  suitable console device even if first is not usable (bnc#862078)

-------------------------------------------------------------------
Tue Jan 14 12:31:53 UTC 2014 - werner@suse.de

- Add patch sysvinit-2.88+dsf-sulogin.diff from upstream to handle
  e.g. strange names of executables in killall5

-------------------------------------------------------------------
Tue Jan 14 11:04:52 UTC 2014 - werner@suse.de

- Split off powerd from sysvinit
- Make powerd work together with systemd
- Modify patch powerd-2.0.2.dif to remove sysvinit features
- Adding the systemd unit file powerd.service

-------------------------------------------------------------------
Tue Jul 23 11:58:05 CEST 2013 - ohering@suse.de

- Remove usage of absolute paths
- List all needed binaries in programs tag

-------------------------------------------------------------------
Fri Jun  7 10:30:04 UTC 2013 - werner@suse.de

- Skip binaries now part of util-linux

-------------------------------------------------------------------
Wed Apr 24 08:49:40 UTC 2013 - werner@suse.de

- Add sanity check for /etc/inittab to avoid reload on systemd
  systems (bnc#813510)

-------------------------------------------------------------------
Mon Mar  4 16:16:45 UTC 2013 - coolo@suse.com

- move mkinitrd scripts of blogs to sysvinit-init, it's breaking
  systemd/plymouth (bnc#804458)

-------------------------------------------------------------------
Fri Aug 17 11:48:35 UTC 2012 - werner@suse.de

- Added patch from Roger Leigh to correct the manual page of startpar

-------------------------------------------------------------------
Fri Aug 10 12:44:29 UTC 2012 - werner@suse.de

- Increase daemon detection time in startproc to give started
  process the time to daemonize (bnc#757643)

-------------------------------------------------------------------
Thu Aug  2 13:58:11 UTC 2012 - werner@suse.de

- Add fix/workaround in blogd for new glibc internal pthread API to
  avoid an glibc nptl assert report in bnc#772055

-------------------------------------------------------------------
Thu Jun 21 07:16:05 UTC 2012 - lnussel@suse.de

- fix deadlock in blogd that happens on shutdown (bnc#730193)

-------------------------------------------------------------------
Wed May 23 10:45:13 UTC 2012 - werner@suse.de

- Fix parameter turner in fscanf to really detect the file system
  type in startproc/checkproc/killproc (bnc#762489)

-------------------------------------------------------------------
Fri May  4 12:47:47 UTC 2012 - werner@suse.de

- Add two patch from upstream
  + Avoid crash for exported environment for processes init spawns
- Fix typo as the script for powerd (bnc#758920)

-------------------------------------------------------------------
Mon Apr 16 08:18:25 UTC 2012 - mvyskocil@suse.cz

- add mingetty to Requires
  * remove it as dependency from aaa_base ad it's needed for sysvinit only

-------------------------------------------------------------------
Fri Mar 16 16:51:33 UTC 2012 - werner@suse.de

- Add two patch from upstream
  + Handle deleted binaries in pidof (was upstream bug #34992)
  + Allow init to delte extra environment variables (was upstream
    bug #35858)
  + Avoid that init double environment variables for its childs
    (was upstream bug #35855)

-------------------------------------------------------------------
Wed Feb  8 12:35:24 UTC 2012 - werner@suse.de

- Work around dully check script of obs

-------------------------------------------------------------------
Wed Feb  1 12:01:05 UTC 2012 - werner@suse.de

- Avoid useless check for runlevel as access(2) now works on
  kernel 3.0 and above, this fixes bnc#744538

-------------------------------------------------------------------
Tue Jan 31 16:40:18 UTC 2012 - werner@suse.de

- New killproc-2.21 which includes the last bug fixes as well as
  new features like support for ionice with startproc
- New showconsole-1.16 which includes the last bug fixes
- New startpar-0.58 which includes the last bug fixes as well as
  the patches from Debian
- Make rpmlint happy

-------------------------------------------------------------------
Mon Dec 19 18:13:19 UTC 2011 - werner@suse.de

- Avoid trouble with indirect console names (bnc#731563)
- Unmount proc file system if initial not mounted (bnc#718385)

-------------------------------------------------------------------
Thu Oct 20 12:31:09 UTC 2011 - werner@suse.de

- Use pipe to synch parent with child in startproc (bnc#713342)

-------------------------------------------------------------------
Tue Oct 18 09:30:36 UTC 2011 - werner@suse.de

- Add option -x to be able to identify scripts overwriting their
  command line (bnc#723708)

-------------------------------------------------------------------
Mon Oct 17 09:08:36 UTC 2011 - werner@suse.de

- There was never a version 1.16 for showconsole 
- Add some code to be able to detect programs even as user with
  kernel 3.0 and above (bnc#723072)

-------------------------------------------------------------------
Tue Oct 11 13:46:46 UTC 2011 - coolo@suse.com

- do not telinit u if /sbin/init is not sysvinit

-------------------------------------------------------------------
Tue Oct 11 11:04:56 UTC 2011 - coolo@suse.com

- split out the symlink /sbin/init into a special subpackage,
  which does _NOT_ do a split provide. systemd-sysvinit will 
  provide this, so you need to do extra work if you want to stay
  on sysvinit

-------------------------------------------------------------------
Tue Oct 11 10:16:45 UTC 2011 - coolo@suse.com

- remove unused files

-------------------------------------------------------------------
Tue Oct  4 08:51:19 UTC 2011 - uli@suse.com

- cross-build fix: use %__cc, %configure macros

-------------------------------------------------------------------
Thu Sep  8 15:20:30 UTC 2011 - giecrilj@stegny.2a.pl

- update to showconsole-1.16 (manual page syntax)

-------------------------------------------------------------------
Fri Sep  2 15:43:20 UTC 2011 - werner@suse.de

- Update to killproc-2.20 
- Update to showconsole-1.15
- Clean spec file

-------------------------------------------------------------------
Sat Aug 13 01:23:40 UTC 2011 - giecrilj@stegny.2a.pl

- added documentation (including mandatory COPYING)
- corrected errors in manual pages
- incorporated showconsole-1.14.dif into showconsole-1.15

-------------------------------------------------------------------
Mon Aug  1 14:25:56 UTC 2011 - werner@suse.de

- libblogger: check for SIGPIPE and block SIGPIPE during write, this
  also does help startpar not to die on SIGPIPE (bnc#679671)
- blogd: add a further check for nsigsys in writelog() (bnc#679671)

-------------------------------------------------------------------
Wed Jul 27 13:11:31 UTC 2011 - werner@suse.de

- Add workaround for blowfish signedness bug (CVE-2011-2483)

-------------------------------------------------------------------
Wed Jul 27 10:41:27 UTC 2011 - werner@suse.de

- Sulogin: respect byte order that is do not mix chars and ints
  (bnc#707724)

-------------------------------------------------------------------
Tue Jul 26 12:13:18 UTC 2011 - werner@suse.de

- Sulogin: enforce reconnection of stdin/stdout/stderr if a device
  was specified.
- Sulogin: if zero is read at reading the passwd guess it's done.

-------------------------------------------------------------------
Tue Jun 28 08:36:54 UTC 2011 - aj@suse.de

- Fix build without libcrypt.a (without static glibc), added
  patch sysvinit-2.88+dsf-crypt.patch.

-------------------------------------------------------------------
Wed Jun  1 12:57:08 UTC 2011 - lnussel@suse.de

- use /run for utmp as that's already mounted by the initrd

------------------------------------------------------------------
Thu May 19 12:53:51 CEST 2011 - werner@suse.de

- Add latest change for sulogin multiple console devices support

------------------------------------------------------------------
Wed Apr 20 13:14:43 CEST 2011 - werner@suse.de

- Aoid possible trouble due raw pts/ptmx terminal line in both
  blogd and startpar
- Block SIGTTOU during tcsetattr(3) library call in both blogd
  and startpar
- Replace select(2) with pselect(2) in blogd and ensure that
  the timeout structure will be reseted after a timeout

------------------------------------------------------------------
Tue Apr 19 15:51:23 CEST 2011 - werner@suse.de

- Correct shutdown messages of startpar send via blogd

------------------------------------------------------------------
Tue Apr 19 14:08:04 CEST 2011 - werner@suse.de

- Avoid possible races which can be happen if blogd sees a signal
  and will exit then (related to bnc#642289)

------------------------------------------------------------------
Fri Apr 15 16:47:43 CEST 2011 - werner@suse.de

- Fix exit code of checkproc in case of an existing pid file
  without running process (bnc#687547)

------------------------------------------------------------------
Wed Apr  6 15:22:20 CEST 2011 - werner@suse.de

- Fix bug in killproc that is do not stop searching for a match if
  a mountpoint does not match, reported by Friedrich Haubensak.

------------------------------------------------------------------
Fri Apr  1 15:00:19 CEST 2011 - werner@suse.de

- Let sulogin respect device on the command line as well as the
  standard input
- Let sulogin initialize serial terminals

------------------------------------------------------------------
Thu Mar 31 16:14:55 CEST 2011 - werner@suse.de

- Remove debug code from showconsole/blogd
- Make serial console tc init work even with blogd
- sulogin: add support for multiple console devices

------------------------------------------------------------------
Fri Mar 25 18:59:05 CET 2011 - werner@suse.de

- New showconsole verion 1.14
  * Use sysfs file as fallback if possible
  * Add more sanity checks to avoid looping on tty0

-------------------------------------------------------------------
Fri Mar 25 12:13:30 CET 2011 - werner@suse.de

- Fix triggered endless loop in blogd (bnc#642289)
  * Writing on tty0 caused blogd to re-read its own messages
  * The usage of ttyname(3) on /dev/console can fail

-------------------------------------------------------------------
Tue Mar 15 16:01:22 CET 2011 - werner@suse.de

- Update to current SVN version of sysvinit 2.88dsf:
  * Fix counting message lines in wall. Patch from Petr Lautrbach.
  * Fix bad printf conversion specifier in wall. Patch from Sébastien Luttringer.
  * Add patches from Openwall project. Thanks goes to Solar Designer.
  * Add code to detect the system consoles with the help of the
    new /proc/consoles files of linux kernel 2.6.38+
  * Try to make utmpdump IPv6 valid, change based on suggestion from
    Navdeep Bhatia (see local bug #32429)
  * Fix signal and alarm handling based on the patch from Florent Viard.
    (was local bug #32304)
  * Add fix for Redhat bug #573346: last incorrectly displays IPv6
    addresses (was local bug #29497)
  * Correct fix for Debian bug #547073: use IUTF8 flag if defined
    and if already set to make sure the utf-8 flag is not cleared
    from the tty. Patch from Samuel Thibault.
  * Include limits.h in killall.c to enforce definition of PATH_MAX
  * Fix sysvinit bug #29758 Linker invocation should not contain
    headers. Change based on patch from Elias Pipping.
  * Add fix for Debian bug #580272: use return value 1 of
    is_selinux_enabled() to determine if SELinux is enabled,
    otherwise initialize SELinux and load the policy. Patch from
    Petter Reinholdtsen.
  * Make quotes visible in example of the manual page of fstab-decode
  * Add #ifdef in bootlogd.c to avoid gcc warnings about unused
    variable on non-linux platforms.
  * Only set the VSWTC field for termios in init if it is available,
    to get the source building on FreeBSD.

-------------------------------------------------------------------
Fri Mar 11 17:05:55 CET 2011 - werner@suse.de

- startpar: fix location of consoles under /proc
- startpar: ignore errors from system console not being a tty

-------------------------------------------------------------------
Thu Mar 10 15:15:33 CET 2011 - werner@suse.de

- Make blogd work together with kernel from 11.4 even on a
  serial system console (bnc#672450)

-------------------------------------------------------------------
Thu Mar  3 14:54:10 CET 2011 - werner@suse.de

- Make option -k for killproc utilities work for normal users even
  if the exe link of an own process remains to root (bnc#664941)

-------------------------------------------------------------------
Tue Feb 15 15:44:33 CET 2011 - werner@suse.de

- New killproc version 2.19: bug fix update

-------------------------------------------------------------------
Thu Feb 10 14:01:35 CET 2011 - werner@suse.de

- Support the socket forwarding of systemd (bnc#656104)

-------------------------------------------------------------------
Tue Feb  8 18:55:21 UTC 2011 - werner@suse.de

- Make real device comparision in killproc/checkproc to fix bnc#644171
- Also make ignore mode in checkproc work
- Enhance mkill to work on root fs and ignore kernel threads

-------------------------------------------------------------------
Mon Feb  7 13:26:19 CET 2011 - werner@novell.com

- New killproc version 2.18

-------------------------------------------------------------------
Fri Feb  4 15:02:22 CET 2011 - werner@novell.com

- Killproc:
  * Add new program rvmtab to write out the current content of
    /proc/mounts in the reverse mount order determined with the
    help of /proc/self/mountinfo
  * Use faster pointer list implementation

-------------------------------------------------------------------
Thu Jan 27 13:00:09 UTC 2011 - werner@novell.com

- Killproc: Sort mount info pointers in the reverse order of the
  directory depth to become the string compare of the readed link
  name of the exe link more safely.

-------------------------------------------------------------------
Fri Jan 21 19:26:44 CET 2011 - werner@suse.de

- Killproc: Do not be fooled if a device is mounted several times

-------------------------------------------------------------------
Tue Nov  9 16:30:56 CET 2010 - werner@suse.de

- Change showconsole to use newest /proc/tty/consoles API

-------------------------------------------------------------------
Fri Oct 29 17:20:56 CEST 2010 - werner@suse.de

- Add newline after blogger message

-------------------------------------------------------------------
Wed Oct 27 12:46:16 CEST 2010 - werner@suse.de

- Fix cast&past error in killproc/checkproc

-------------------------------------------------------------------
Thu Oct 21 12:00:26 CEST 2010 - werner@suse.de

- New killproc version 2.17
  * Use /proc/self/mountinfo to avoid system call stat(2) on
    running binaries not located on the mount point of the
    current handled program
  * Avoid to be detect sub (shadow) mounts on NFS mounts
- New showconsole 1.13
- Correct position of string pointer in NFS struct used in
  killall5/pidof

-------------------------------------------------------------------
Tue Oct 12 18:21:44 CEST 2010 - werner@suse.de

- libblogger: set O_CLOEXEC for named FIFO  /dev/blog (bnc#645793)

-------------------------------------------------------------------
Mon Oct  4 16:46:53 CEST 2010 - werner@suse.de

- Add exit code exception for checkproc for the case of a not
  installed program, use exit code 4 (bnc#643433)

-------------------------------------------------------------------
Fri Oct  1 15:43:16 CEST 2010 - werner@suse.de

- blogd: correct order of setting back termios and termios locks
- startpar: avoid EIO in do_forward if do_forward becomes a 
  background process
- Make sure that after installation of /sbin/init the init
  process does re-execute that is split %post into one for
  the tools sub package and one of the main package

-------------------------------------------------------------------
Wed Sep 22 14:38:37 CEST 2010 - werner@suse.de

- New showconsole version 1.12
  * Use /proc/tty/consoles if ioctl TIOCGDEV does not exist
  * Make pseudo terminal raw as it is not show anything
- New startpar 0.57
  * Set raw pseudo terminals only once
  * Set SIGTTIN to default before executing child
  * Ignore error on reading termios

-------------------------------------------------------------------
Mon Aug 23 17:40:12 CEST 2010 - werner@suse.de

- New showconsole version 1.11
  * Handle more than two console devices
  * Speed up used pts/tty pair by enabling raw mode
  * Implement termios locking scheme but disable it as it may
    interfere with sulogin and others using the old console
- Enabling full raw mode for pty/tty pairs of startpar

-------------------------------------------------------------------
Thu Jul 29 18:15:34 CEST 2010 - werner@suse.de

- New startpar version 0.56
  * Handle processes within signal handler
  * Make first process loop more readable
  * Use pselect(2) to wait on SIGCHLD without using a pipe

-------------------------------------------------------------------
Tue Jul 27 10:56:47 CEST 2010 - werner@suse.de

- Fix typo that is use "cmdline" instead of "cmd" (bnc#623766)

-------------------------------------------------------------------
Tue Jul 20 11:43:58 CEST 2010 - werner@suse.de

- Enforce killproc to wait even if the SIGTERM has been specified
  on the command line.  This should avoid the in most cases that
  the daemon has not finished its response on SIGTERM, see bug
  bnc#623460 and bug bnc#595796.

-------------------------------------------------------------------
Fri Jul 16 17:22:27 CEST 2010 - werner@suse.de

- Newer killproc sends only SIGTERM as required by LSB if -TERM is
  specified on the command line.  Use the default which is SIGTERM
  followed by SIGKILL if the timeout of 5 seconds is reached.

-------------------------------------------------------------------
Wed Jun  2 15:01:00 UTC 2010 - coolo@novell.com

- prereq does not fix bnc#610628, the real problem is the cycle
  of sysvinit->sysvinit-tools->mkinitrd <--, which is broken up by
  simply ignoring one requirement. If this requirement is the one
  between sysvinit->sysvinit-tools, we get in deep trouble. Way 
  deeper trouble than missing mkinitrd_setup in sysvinit-tools's
  %post

-------------------------------------------------------------------
Tue Jun  1 14:56:02 UTC 2010 - coolo@novell.com

- Use Prereq instead of normal Requires to force an early installation
  of sysvinit-tools (bnc#610628)

-------------------------------------------------------------------
Fri May 28 16:33:40 CEST 2010 - werner@suse.de

- Implemenation of a workaround of missing console messages in
  blogd (bnc#593957)

-------------------------------------------------------------------
Fri May 21 16:24:50 CEST 2010 - werner@suse.de

- Avoid crash due changed common-session-pc (bnc#605681)

-------------------------------------------------------------------
Mon May 17 11:34:05 CEST 2010 - werner@suse.de

- Add patch from Thomas for moving powerd from using gethostbyname()
  to getaddrinfo()
- Add upstream patch for correct using SELinux API

-------------------------------------------------------------------
Wed May 12 11:28:31 UTC 2010 - pth@ssue.de

- Apply sysvinit-2.88dsf-utf8.dif without -p2.
- Fix sysvinit-2.88dsf-utf8.dif (Changelog patch didn't apply).

-------------------------------------------------------------------
Thu Apr 29 13:00:25 CEST 2010 - werner@suse.de

- Add URL of upstream location

-------------------------------------------------------------------
Tue Apr 27 14:36:43 CEST 2010 - werner@suse.de

- Do not overwrite UTF8 input terminal setting as this may cause
  trouble on system consoles forwarded to a foreign serial console

-------------------------------------------------------------------
Tue Apr 13 18:27:02 CEST 2010 - werner@suse.de

- Add patch to make last(1) knowing latest IPv6 specs

-------------------------------------------------------------------
Mon Apr 12 17:49:46 CEST 2010 - werner@suse.de

- Be LSB compliant with killproc (bnc#595796, bnc#578246)

-------------------------------------------------------------------
Fri Apr  9 15:45:51 CEST 2010 - werner@suse.de

- Correct Pre-Requires to reflect package split
- Update to sysvinit (2.88dsf) world; urgency=low

* Mention new home on Savannah in README.
  * Revert change from Fedora/RedHat where the now obsolete command
    INIT_CMD_CHANGECONS was introduced.  Based on feedback and patch
    from Bill Nottingham.
  * Adjust makefile to make sure the install directories are created
    before files are copied into them.
  * Simplify build rules, based on patch from Mike Frysinger and Gentoo.
  * Fix minor bug in optimizing of argument parsing.  Based on
    report from jakemus on freshmeat.
  * Add casts to get rid of compiler warning about signed/unsigned issues.
  * Change tty handling in init to make sure the UTF-8 flag is not cleared
    on boot.  Patch from Samuel Thibault.
  * Add Makefile in toplevel directory.
  * Print usage information when shutdown is used by non-root user.
    Patch from Mike Frysinger and Gentoo.
  * Sync shutdown manual page and usage information.  Patch from Mike
    Frysinger and Gentoo.
  * Fix race condition in utmp writing.  Patch from Gil Kloepfer via
    Mike Frysinger and Gentoo.
  * Rewrite findtty() in bootlogd to recursively search /dev/ for the
    correct device, to handle terminal devices for example in /dev/pty/.
    Patch from Debian.
  * Make sure bootlogd findpty() returns an error value when it fails to
    find a usable pty.  Patch from Rob Leslie via Debian.
  * Make sure bootlogd fflush() every line, even if asked not to flush
    to disk using fdatasync().  Patch from Scott Gifford via Debian.
  * Add compatibility code to handle old path "/etc/powerstatus" for a
    while.
  * Incude definition for MNT_DETACH which is missing in older GNU libc
    headers.
  * Do not strip binaries before installing them, to make it easier to
    get binaries with debug information installed.
  * Add the comment from Andrea Arcangeli about the correct
    place of setting the default childhandler within spawn().
  * Make sure that newline is printed out for last(1) even
    if an utmp record entry is truncated.
  * Check if utmp not only exists but also is writable and delay
    writing out of the utmp runlevel record if utmp is not writable.
  * Be able to find libcrypt also on 64 bit based architectures.
  * Add option -w to the last command to display the full user and
    domain names in the output.  Patch from Petr Lautrbach.
  * Add a manual page for utmpdump as this tool is sometimes
    very useful even if not intended for normal use.
  * Use paths.h macros for wall
  * Change path "/etc/powerstatus" to "/var/run/powerstatus"
  * Detected also removable block devices at halt/reboot to be able
    to flush data and send them the ATA standby command.  This should
    avoid data loss on USB sticks and other removable block devices.
  * Flush block devices on halt/reboot if not done by the kernel.
  * Set SHELL to /bin/sh in the environmant of shutdown.
  * Retry to write out shutdown messages if interrupted.
  * pidof/killall5 - make omit pid list a dynamic one.
  * pidof - provide '-n' to skip stat(2) syscall on network based FS.
  * init - avoid compiler warnings
  * init - initialize console by using the macros from ttydefaults.h
  * init - add the possiblity to ignore further interrupts from keyboard
  * init - add the possiblity to set sane terminal line settings
  * sulogin - add the possibility to reset the terminal io
  * Fix some minor problems
  * init - enable is_selinux_enabled() to detect selinuxfs
  * Add fix for Debian bug #536574 -- Can be enabled by -DACCTON_OFF
  * Add helper program fstab-decode to make it easier to handle
    /etc/mtab content. Patch by Miloslav Trmac and Fedora.
  * Add fix for Debian bug #335023 - Make sure TERM is set on FreeBSD.
  * Add fix for Debian bug #374038 - Make it clear that shutdown -c can
    only cancel a waiting shutdown, not an active one.
  * Add note to pidof manual page about the use of readlink(2). Patch by
    Bill Nottingham and Fedora.
  * Add PAM patch contrib/notify-pam-dead.patch based on Debian bug
    #68621, which will add PAM support for programs spawned by init on
    the console like sulogin. Based on patch by Topi Miettinen.  This
    patch is not applied by default yet while we review its
    usefullness.  It is only helpful for session handling, as sulogin
    do not use and will not use a PAM conv() function.  The current
    sulogin is able to handle DES as well as MD5, SHA, and Blowfish
    encrypted passwords due using getpwnam(3).
  * Move utmp/wtmp before the execvp() in spawn() to be sure to
    use the correct pid even on a controlling tty
  * Remaining problem is that the pid of the second fork() for
    getting a controlling tty isn't that reported by spawn()
  * Re-enable writting utmp/wtmp for boot scripts
  * Extend sulogin to support additional encryption algorithms
  * Re-enable maintenance message of sulogin
  * Enable the sulogin fallback password check to handle  MD5, SHA, and
    Blowfish encrypted passwords in case of getpwnam(3) fails.
  * sulogin picking the SELinux context was broken. Patch by Daniel Walsh

-------------------------------------------------------------------
Fri Apr  9 14:30:08 CEST 2010 - werner@suse.de

- Start the service sshd as early as possible (bnc#594223)

-------------------------------------------------------------------
Tue Mar 23 17:21:06 CET 2010 - werner@suse.de

- Test out sysvinit (2.88dsf) UNRELEASED; urgency=low
- Update to sysvinit (2.87dsf) world; urgency=low

* Document -e and -t options for telinit in init(8).
 * Document in halt(8) that -n might not disable all syncing.
   Patch by Bill Nottingham and Fedora
 * Adjust output from "last -x".  In reboot lines, print endpoint
   of uptime too.  In shutdown lines print downtimes rather than
   the time between downs.  Fix typo in string compare in last.c.
   Patch by Thomas Hood.
 * Improve handling of IPv6 addresses in last.  Patch from Fedora.
 * Add new option -F to last, to output full date string instead
   of the short form provided by default.  Patch from Olaf Dabrunz
   and SuSe.
 * Fix utmp/wtmp updating on 64-bit platforms.  Patch by Bill
   Nottingham and Fedora.
 * Avoid unchecked return value from malloc() in utmpdump.
   Patch from Christian 'Dr. Disk' Hechelmann and Fedora.
 * Make sure to use execle and no execl when passing environment to
   the new process.  Patch from RedHat.
 * Correct init to make sure the waiting status is preserved across
   re-exec.  Patch from RedHat.
 * Correct init to avoid race condition when starting programs during
   boot.  Patch from SuSe.
 * Allow 'telinit u' in runlevels 0 and 6.  Patch from Thomas Hood.
 * Improve error message from init if fork() fail.  Patch found in Suse.
 * Add support for SE Linux capability handling.  Patch from Manoj
   Srivastava, adjusted to avoid aborting if SE policy was loaded in
   the initrd with patch from Bill Nottingham and Fedora.
 * Add -c option to pidof for only matching processes with the same
   process root.  Ignore -c when not running as root.  Patch from
   Thomas Woerner and Fedora.
 * Add usleep in killall5 after killing processes, to force the kernel
   to reschedule.  Patch from SuSe.
 * Modify pidof to not print empty line if no pid was found.
 * Modify init and sulogin to fix emergency mode's tty, making sure ^C
   and ^Z work when booting with 'emergency' kernel option.  Patch from
   Samuel Thibault.
 * Modify init to allow some time for failed opens to resolve themselves.
   Patch from Bill Nottingham and Fedora.
 * Modify init to shut down IDE, SCSI and SATA disks properly.  Patches
   from Sebastian Reichelt, Werner Fink and SuSe.
 * Modify wall to use UT_LINESIZE from <utmp.h> instead of hardcoded
   string lengths.  Patch from SuSe.
 * Change wall to make halt include hostname in output.
 * Change killall to avoid killing init by mistake.  Patch from SuSe.
 * Change killall5 to use the exit value to report if it found any
   processes to kill.  Patch from Debian.
 * Add option -o opmitpid to killall5, to make it possible to skip
   some pids during shutdown.  Based on patch from Colin Watson and
   Ubuntu.
 * Modify killall to work better with user space file system, by
   changing cwd to /proc when stopping and killing processes, and
   avoiding stat() when the value isn't used.  Also, lock process
   pages in memory to avoid paging when user processes are stopped.
   Patch from Debian and Goswin von Brederlow with changes by Kel
   Modderman.
 * Change shutdown to only accept flags -H and -P with the -h flag,
   and document this requirement in the manual page.
 * Change reboot/halt to work properly when used as a login shell.
   Patch by Dale R. Worley and Fedora.
 * Let sulogin fall back to the staticly linked /bin/sash if both roots
   shell and /bin/sh fail to execute.

-------------------------------------------------------------------
Wed Mar  3 13:22:11 UTC 2010 - coolo@novell.com

- provide sbin_init (so external packages can require either sysvinit
  or upstart)

-------------------------------------------------------------------
Thu Feb 11 13:36:19 UTC 2010 - coolo@novell.com

- Split out tools not specific to System V into a tool subpackage
  to support alternative init implementations (fate#305690)

-------------------------------------------------------------------
Mon Feb  8 15:58:56 CET 2010 - werner@suse.de

- Add a manual page for utmpdump (bnc#576967)

-------------------------------------------------------------------
Fri Jan 29 14:30:44 CET 2010 - werner@suse.de

- Remove start-stop-daemon binary (bnc#568950)

-------------------------------------------------------------------
Mon Dec 21 16:16:13 CET 2009 - werner@suse.de

- Write pid file if /var is mounted rw (bnc#565620)

-------------------------------------------------------------------
Tue Dec  8 00:27:49 CET 2009 - jengelh@medozas.de

- enable parallel building

-------------------------------------------------------------------
Mon Dec  7 16:25:38 CET 2009 - werner@suse.de

- The same procedure for killproc.c its self (caused by bnc#559534)

-------------------------------------------------------------------
Thu Dec  3 18:01:10 CET 2009 - werner@suse.de

- Add missed line to startproc.c and also make manual page more
  clear how startproc works (caused by bnc#559534)

-------------------------------------------------------------------
Sun Nov 15 14:01:30 CET 2009 - meissner@suse.de

- refresh all patches with fuzz=0

-------------------------------------------------------------------
Mon Nov  2 17:10:48 CET 2009 - mmarek@suse.cz

- fixed killproc-2.16.dif.

-------------------------------------------------------------------
Thu Oct 29 22:39:27 CET 2009 - mmarek@suse.cz

- killall5: do not kill /sbin/mdmon (fate#306823).

-------------------------------------------------------------------
Wed Oct 28 10:47:42 CET 2009 - werner@suse.de

- Avoid message on terminated process during reading its /proc files

-------------------------------------------------------------------
Tue Sep 29 10:48:03 CEST 2009 - werner@suse.de

- Make killproc utils more stable in case that during read(2) a proc
  file the corresponding process has already terminated (bnc#542717)

-------------------------------------------------------------------
Thu Aug 20 14:17:32 CEST 2009 - werner@suse.de

- Make a new showconsole version 1.10
  * Add time stamps to blogger API (fate #305596)
  * Add newline before writing out blogger fifo content
- Make a new startpar version 0.52
  * Use blogd API (fate #305596)
- Make a new killproc version 2.16

-------------------------------------------------------------------
Tue Jul 28 16:48:09 CEST 2009 - werner@suse.de

- Do not loop around in the forwarder of startpar

-------------------------------------------------------------------
Tue Jun 30 16:32:50 CEST 2009 - werner@suse.de

- Add patch from Olaf Kirch to avoid using mutex locking for every
  character (from Moblin:Factory)

-------------------------------------------------------------------
Mon Jun 29 13:46:44 CEST 2009 - werner@suse.de

- Start boot scripts with their symlinks name

-------------------------------------------------------------------
Wed May 27 13:26:50 CEST 2009 - werner@suse.de

- Increase hash size for runtime linker of often used tools

-------------------------------------------------------------------
Mon May 11 10:27:43 CEST 2009 - werner@suse.de

- Make it build

-------------------------------------------------------------------
Thu May  7 12:47:36 CEST 2009 - werner@suse.de

- Reorder last patch in spec file

-------------------------------------------------------------------
Wed May  6 21:36:13 CEST 2009 - crrodriguez@suse.de

- link /sbin/init dynamically, tested in 11.1, also
  all other distros work just fine this way.

-------------------------------------------------------------------
Mon May  4 12:22:55 CEST 2009 - werner@suse.de

- Blogd: shorten minimal timeout at the end and hold all pages
  in physical RAM

-------------------------------------------------------------------
Thu Apr 30 11:42:34 CEST 2009 - werner@suse.de

- For usleep(8) use nanosleep(2) instead of obsolete usleep(3)

-------------------------------------------------------------------
Wed Apr 29 12:59:06 CEST 2009 - werner@suse.de

- mkill: Do not remove all pid's from list for one fuse process

-------------------------------------------------------------------
Tue Apr 28 12:49:42 CEST 2009 - werner@suse.de

- Disable blogd on fastboot or quiet boot

-------------------------------------------------------------------
Tue Apr 21 18:40:42 CEST 2009 - werner@suse.de

- Make initrd script for blogd depend on initrd script clock

-------------------------------------------------------------------
Fri Mar 27 13:08:59 CET 2009 - werner@suse.de

- Update to killproc 2.15
  * New option -w for making startproc waiting on daemons parent
    process (bnc#489473, bnc#482096 comment#21 ff)
  * New option -W for making startproc waiting on files created
    by the daemon (bnc#482096 comment#24 ff)
- Merge changes for preload code of startpar into one patch
- nfs4pidof: avoid nfs code for process which are on shadow mounts
  points of NFS mounts

-------------------------------------------------------------------
Wed Mar 25 21:32:51 CET 2009 - coolo@suse.de

- exec one more time so that the preload part does not appear
  under the name of the init script in bootcharts

-------------------------------------------------------------------
Wed Mar 25 18:06:13 CET 2009 - coolo@suse.de

- fix the preload functionality in telling the parent process through
  SIGUSR1 and SIGUSR2 about preload's presence

-------------------------------------------------------------------
Fri Mar 13 17:58:53 CET 2009 - werner@suse.de

- mkill: avoid signaling process which are on shadow mounts points
  that is e.g. processes on /dev/pts while running mkill on /dev

-------------------------------------------------------------------
Fri Mar 13 15:03:13 CET 2009 - werner@suse.de

- Do not overwrite SUSE define

-------------------------------------------------------------------
Fri Mar 13 13:34:05 CET 2009 - werner@suse.de

- startpar: fix file descriptor leak (bnc#485112)

-------------------------------------------------------------------
Wed Mar 11 14:24:06 CET 2009 - werner@suse.de

- nfs4pidof: make sure not to stumble on short named mount points
  to avoid to terminate processes on wrong mount points

-------------------------------------------------------------------
Tue Mar 10 13:12:16 CET 2009 - werner@suse.de

- mkill: make sure not to stumble on short named mount points to
  avoid to terminate processes on wrong mount points (bnc#466484)

-------------------------------------------------------------------
Mon Mar  9 13:54:55 CET 2009 - werner@suse.de

- Add patch from Debian people to startpar and mode to version 0.53
  
-------------------------------------------------------------------
Thu Mar  5 17:27:33 CET 2009 - werner@suse.de

- Update to killproc 2.14 to include most of our patches and to
  use openat(2), readlinkat(2), and opendirat(2) system calls.
- Remove /dev/initctl from file list, do not create blogd pipe
  /dev/blogd (bnc#475580)

-------------------------------------------------------------------
Fri Feb 20 16:08:33 CET 2009 - werner@suse.de

- make sure that newline is printed out for last(1) (bnc#471386)

-------------------------------------------------------------------
Thu Feb 12 14:53:14 CET 2009 - coolo@suse.de

- support preload in its job in giving it the init scripts to preload
- don't wait 0.3s when we need only 0.03

-------------------------------------------------------------------
Fri Feb  6 00:36:27 CET 2009 - ro@suse.de

- fix build (move static int loop before first usage)

-------------------------------------------------------------------
Tue Jan 27 16:00:03 CET 2009 - werner@suse.de

- Do not terminate udevd with mkill(8)
- Do not terminate udevd with killall5(8)
- Avoid chrashing startpar due recursion caused by loops

-------------------------------------------------------------------
Mon Jan 26 12:02:43 CET 2009 - werner@suse.de

- Do not kill fuse user space processes with mkill(8) (bnc#466484)
- Minimize fuse patch for killall5(8) by using readlinkat(2)

-------------------------------------------------------------------
Wed Dec 10 14:27:34 CET 2008 - werner@suse.de

- Mkill(8): add the option -0 for debugging and wait upto 3 seconds
  if a signal was send.

-------------------------------------------------------------------
Fri Dec  5 16:46:55 CET 2008 - werner@suse.de

- New tool in killproc source tree: mkill(8) for sending all
  processes making a active mount busy a signal, this avoid fuser.

-------------------------------------------------------------------
Fri Dec  5 11:55:13 CET 2008 - werner@suse.de

- New tool in killproc source tree: vhangup(8) for hanging up
  programs on terminal and sending SIGHUP, this avoids fuser.

-------------------------------------------------------------------
Wed Nov 19 14:07:33 CET 2008 - werner@suse.de

- Avoid error messages if blogd is closed premature

-------------------------------------------------------------------
Tue Nov 18 18:44:25 CET 2008 - werner@suse.de

- Mount devpts in initrd (bnc#442891)

-------------------------------------------------------------------
Wed Oct  1 18:08:36 CEST 2008 - werner@suse.de

- Minimize fuse patch

-------------------------------------------------------------------
Wed Oct  1 17:43:52 CEST 2008 - ro@suse.de

- fix fuse_kill patch so that it does not break pidof

-------------------------------------------------------------------
Wed Oct  1 16:39:27 CEST 2008 - werner@suse.de

- Avoid stat(2) for all network based file systems (bnc#409011)

-------------------------------------------------------------------
Wed Sep 17 14:06:04 CEST 2008 - uli@suse.de

- killall5: don't kill FUSE filesystems (Debian bug #476698)

-------------------------------------------------------------------
Mon Sep 15 12:23:36 CEST 2008 - ro@suse.de

- add detection for OBS build environment

-------------------------------------------------------------------
Wed Sep  3 11:09:34 CEST 2008 - hare@suse.de

- Call mkinitrd_setup during %post and %postun (bnc#413709)

-------------------------------------------------------------------
Mon Aug 25 14:46:12 CEST 2008 - prusnak@suse.cz

- enabled SELinux support [Fate#303662]

-------------------------------------------------------------------
Wed Aug 13 16:40:49 CEST 2008 - werner@suse.de

- Startpar: give posix_fadvise a try on boot scripts even if most
  of them are very small

-------------------------------------------------------------------
Mon Aug  4 19:36:29 CEST 2008 - werner@suse.de

- Imake chroot detections to handle inodes and devices (bnc#408959)

-------------------------------------------------------------------
Wed Jul 23 16:02:19 CEST 2008 - hare@suse.de

- Include mkinitrd scriptlets.

-------------------------------------------------------------------
Fri Jul 18 17:15:48 CEST 2008 - werner@suse.de

- Make a new startpar version 0.52
  * Should know about .depend.halt of new insserv

-------------------------------------------------------------------
Fri Jul  4 16:03:15 CEST 2008 - werner@suse.de

- Fix a long standing bug in startpar introduced by implementing
  the make like behaviour (bnc#394926)
- Make a new startpar version 0.51

-------------------------------------------------------------------
Fri Jun 13 13:41:43 CEST 2008 - werner@suse.de

- Let blogd detect changes of screen size, set new size pty pair,
  and if process group is not init send a SIGWINCH (bnc#259577)
- In startpar use a signal handler on SIGWINCH (bnc#259577)

-------------------------------------------------------------------
Wed Jun 11 14:58:49 CEST 2008 - werner@suse.de

- Startpar: try to reduce race if kbd change tty size (bnc#259577)

-------------------------------------------------------------------
Tue May 20 14:31:14 CEST 2008 - werner@suse.de

- On halt flush not only unmanged disk but also removable devices
  like usb sticks (bnc#386487 related to bnc#229210)

-------------------------------------------------------------------
Thu Mar 13 17:27:50 CET 2008 - werner@suse.de

- Avoid race in blogd due sheduling priority which may raise EIO
  otherwise and do not free name of second tty needed for reconnect
  (bnc#370328)

-------------------------------------------------------------------
Thu Jan 10 10:49:52 CET 2008 - werner@suse.de

- Make it build with new glibc headers

-------------------------------------------------------------------
Mon Jan  7 15:45:23 CET 2008 - werner@suse.de

- Add cosmetic patch for startpar from the Debian people

-------------------------------------------------------------------
Fri Nov 30 14:00:20 CET 2007 - werner@suse.de

- New version 2.13 of killproc
  * Add support for more than one ignore pid file (bug #343227)
  * Close existing file descriptors on execve even if not a tty
  * Do not fork if startpar is used as start_daemon
  * Clean up the manual pages

-------------------------------------------------------------------
Wed Oct 31 18:37:58 CET 2007 - werner@suse.de

- startpar: make iorate a double

-------------------------------------------------------------------
Wed Oct 31 17:20:49 CET 2007 - werner@suse.de

- startproc: add option -T sec to finish waiting if parent exits

-------------------------------------------------------------------
Wed Jun 20 15:35:09 CEST 2007 - coolo@suse.de

- startpar: mark started processes as running

-------------------------------------------------------------------
Mon Jun 18 15:49:13 CEST 2007 - werner@suse.de

- Add importance for some scripts within startpar
- Handle I/O blocked process very heavy in startpar
- Add new user space program fsync(1) which use fsync(2) for
  updating the in-core state with the hard disk

-------------------------------------------------------------------
Wed Jun 13 13:09:35 CEST 2007 - werner@suse.de

- bug #229210: avoid HDIO_DRIVE_CM ioctl for real SCSI disks.

-------------------------------------------------------------------
Tue Jun 12 11:42:43 CEST 2007 - werner@suse.de

- bug #229210: check for the FLUSH CACHE EXT capability for large
               disks and use this capability if available.

-------------------------------------------------------------------
Wed Jun  6 15:56:46 CEST 2007 - werner@suse.de

- For bug #229210: skip real SCSI disks, also flush disk cache for
  SATA and ATA disks.

-------------------------------------------------------------------
Wed Jun  6 13:01:25 CEST 2007 - werner@suse.de

- More on bug #229210: do not shutdown allready managed disks

-------------------------------------------------------------------
Tue Jun  5 14:45:21 CEST 2007 - werner@suse.de

- /sbin/halt: list and powerdown all disks even SATA/SCSI
  (bug #229210)

-------------------------------------------------------------------
Fri May 11 12:10:18 CEST 2007 - werner@suse.de

- startpar: Try to start more processes even on high loaded systems
- startpar: Detect endless loops on broken systems (no SIGCHILD)

-------------------------------------------------------------------
Thu Apr 19 13:45:46 CEST 2007 - werner@suse.de

- Correct exit status of checkproc n case of using a pid file,
  thanks to Alessandro Soraruf

-------------------------------------------------------------------
Wed Feb 14 15:53:00 CET 2007 - werner@suse.de

- Remove swap supend patch because this is done now by powersave
  calling hal (bug #241204)

-------------------------------------------------------------------
Thu Dec 14 13:43:12 CET 2006 - werner@suse.de

- New killproc 2.12 with new option -N better handling for NFS
  based programs which is not to stat(2) the binary with -N
- Make killall5 and pidof not to stat(2) binaries which are
  loacted on NFS partitions (#224563)

-------------------------------------------------------------------
Tue Aug 22 15:49:48 CEST 2006 - werner@suse.de

- More on delayed utmp write: redo the write on telinit q (#148038)

-------------------------------------------------------------------
Mon Aug 21 12:55:24 CEST 2006 - werner@suse.de

- Make installation work even within chroot and new kernel 2.6.18+

-------------------------------------------------------------------
Fri Aug 18 14:52:19 CEST 2006 - werner@suse.de

- Check if utmp not only exists but is writable (#199412, #148038)
- Delay of utmp runlevel record if utmp is not writable (#148038)

-------------------------------------------------------------------
Thu Aug 10 18:57:12 CEST 2006 - werner@suse.de

- Enable showconsole to provide the major and minor device number
  instead of the device file name.
 
-------------------------------------------------------------------
Fri Jun  9 17:19:21 CEST 2006 - werner@suse.de

- killproc: Allow relocated binary paths and several hard links
            on binaries (bug #183251)

-------------------------------------------------------------------
Tue May 16 18:12:08 CEST 2006 - werner@suse.de

- Reduce buffer usage for reading /proc/stat

-------------------------------------------------------------------
Mon May 15 19:00:25 CEST 2006 - werner@suse.de

- Double buffer for /proc/stat for super large systems (#175385)

-------------------------------------------------------------------
Fri May 12 18:03:34 CEST 2006 - olh@suse.de

- do not strip startpar and start-stop-daemon binaries

-------------------------------------------------------------------
Thu Mar 16 16:36:02 CET 2006 - werner@suse.de

- Do not rely on timeout after EINTR of select()

-------------------------------------------------------------------
Mon Mar  6 15:01:23 CET 2006 - werner@suse.de

- Handle a second system console from kernel command line (#155292)
- Handle interrupted fifo writes even in shutdown

-------------------------------------------------------------------
Wed Feb  8 12:16:54 CET 2006 - werner@suse.de

- Close high file descriptors even for single jobs (bug #148668)

-------------------------------------------------------------------
Tue Feb  7 17:44:21 CET 2006 - werner@suse.de

- Add boot script for powerd (bug #147660)
- Make powerd handling a pid file

-------------------------------------------------------------------
Wed Jan 25 21:30:59 CET 2006 - mls@suse.de

- converted neededforbuild to BuildRequires

-------------------------------------------------------------------
Wed Dec 21 17:13:24 CET 2005 - werner@suse.de

- Remove not needed binaries on s390

-------------------------------------------------------------------
Mon Dec  5 19:00:37 CET 2005 - od@suse.de

- Created/added patch for option -F (full time) (bug #136978)

-------------------------------------------------------------------
Mon Dec  5 18:59:44 CET 2005 - od@suse.de

- Added options -a, -d and -i to usage message

-------------------------------------------------------------------
Tue Nov  8 11:56:11 CET 2005 - werner@suse.de

- Move version of killproc to 2.11
  * Allow to set a prefix and to disable usleep

-------------------------------------------------------------------
Wed Nov  2 22:17:05 CET 2005 - dmueller@suse.de

- don't build as root

-------------------------------------------------------------------
Wed Nov  2 16:50:39 CET 2005 - werner@suse.de

- Move version of killporc to 2.10
  * Let checkproc really work like killproc if -k is specified.
    This is that if the pid file provided with option -p does
    not fit to a running process checkproc returns 7 for program
    is not running.
    
-------------------------------------------------------------------
Wed Oct 19 13:56:29 CEST 2005 - werner@suse.de

- Update to sysvinit 2.86

-------------------------------------------------------------------
Tue Sep 20 16:10:14 CEST 2005 - werner@suse.de

- Make it build even on s390

-------------------------------------------------------------------
Thu Sep 15 17:28:38 CEST 2005 - werner@suse.de

- Bounce version of killporc to 2.09
- Add patch of Petter Reinholdtsen for startpar
- Move version of startpar to 0.49

-------------------------------------------------------------------
Thu Sep  1 16:04:41 CEST 2005 - mls@suse.de

- do not leak stdout fd to splash process (bug #105999)

-------------------------------------------------------------------
Thu Aug 25 16:20:00 CEST 2005 - werner@suse.de

- Apply the new LSB rule for optional pid files only (bug #105845)

-------------------------------------------------------------------
Tue Aug 23 13:21:11 CEST 2005 - werner@suse.de

- Enable patch for killproc

-------------------------------------------------------------------
Mon Aug 22 16:00:11 CEST 2005 - werner@suse.de

- Avoid zombie processes using startpar to get the next free
  process slot as fast as possible.
- Make killproc be compliant with the newest LSB specs in case if
  the specified pid file does not exist that the daemon is not
  running (bug #105845).
- Add the possibility of using pid numbers instead of a pid file.
  
-------------------------------------------------------------------
Tue Jun 28 23:14:36 CEST 2005 - schwab@suse.de

- Fix typo.

-------------------------------------------------------------------
Wed May 25 17:05:18 CEST 2005 - werner@suse.de

- Bounce showconsole to version 1.08
- Bounce killproc to version 2.08
- Avoid signess warning of gcc4
- Use sysv_log() instead of log() to avoid builtin log() of gcc4

-------------------------------------------------------------------
Mon May 23 14:35:14 CEST 2005 - werner@suse.de

- Make blogd work even with new root file system behaviour

-------------------------------------------------------------------
Thu May 19 17:47:24 CEST 2005 - werner@suse.de

- More fixes for startpar: do not forget active jobs and correct
  exit status handling for the case of stopping jobs.

-------------------------------------------------------------------
Mon Apr 25 13:37:22 CEST 2005 - werner@suse.de

- Showconsole: more names no belonging to terminals (bug #80304)

-------------------------------------------------------------------
Tue Apr  5 16:39:22 CEST 2005 - werner@suse.de

- startpar: fix endless loop and race condition (bug #74256)

-------------------------------------------------------------------
Sun Apr  3 12:57:28 CEST 2005 - aj@suse.de

- Further fixes for GCC4.

-------------------------------------------------------------------
Thu Mar 24 16:16:32 CET 2005 - uli@suse.de

- fixed to build with GCC4

-------------------------------------------------------------------
Wed Mar  9 16:58:59 CET 2005 - mls@suse.de

- startpar: fix splash progress bar if "make" mode is enabled

-------------------------------------------------------------------
Thu Jan 27 18:38:32 CET 2005 - coolo@suse.de

- catch the case the clock moves back in time during boot

-------------------------------------------------------------------
Tue Jan 18 13:03:10 CET 2005 - coolo@suse.de

- adding patch by Takashi to sort the services before inserting them
  in the queue to allow predictable boot orders
- adding patch by me to update the limit more often in case the load
  is too high (30s is just too long)

-------------------------------------------------------------------
Mon Dec 13 17:08:30 CET 2004 - werner@suse.de

- Update to killproc 2.07 which includes the new ignore file
  feature which works like a pid file but the pid found therein
  will be used to ignore all processes and session with that id.
  
-------------------------------------------------------------------
Fri Dec 10 17:27:45 CET 2004 - werner@suse.de

- Fix bottle neck in startpar calculation of number of parallel
  processes. Now the number of really active processes are used.

-------------------------------------------------------------------
Wed Oct 13 15:55:17 CEST 2004 - werner@suse.de

- Do the real fix for the busy loop problem
- Add a dynamic load balance based on the current process load
  and the current memory usage (bug #45191).

-------------------------------------------------------------------
Mon Oct  4 16:42:56 CEST 2004 - mls@suse.de

- don't call /sbin/splash if proc was unmounted

-------------------------------------------------------------------
Thu Sep 23 11:40:15 CEST 2004 - mls@suse.de

- call splash with $pos:$delta for animated progress bar
- serialize calls to splash program

-------------------------------------------------------------------
Mon Sep 20 20:10:17 CEST 2004 - mls@suse.de

- change bootsplash 'S' option handling to new bootsplash design
- also set progressbar on the fly

-------------------------------------------------------------------
Mon Sep 20 16:15:25 CEST 2004 - werner@suse.de

- Add some more information about the new make like scheme of
  startpar into its own manual page.

-------------------------------------------------------------------
Thu Sep  9 15:33:54 CEST 2004 - werner@suse.de

- startproc: get wait status of already terminated parents on very
  fast systems with high load during boot.

-------------------------------------------------------------------
Thu Sep  2 19:10:49 CEST 2004 - werner@suse.de

- Switch to Takashi's startpar version which is fully compatible
  to previous version.
- Fix startpar to not to loop around if global timeout is expired.
- Fix struct timeval asignment in startpar for big endian.
- Add simple loadavg and memory check in startpar to make it
  compatible with UP system with less memory.

-------------------------------------------------------------------
Tue Jun  1 17:19:56 CEST 2004 - werner@suse.de

- Remove any other workaround for hanging write

-------------------------------------------------------------------
Tue Jun  1 15:45:05 CEST 2004 - werner@suse.de

- Remove ioctl workaround in blogd due it does not work

-------------------------------------------------------------------
Tue Jun  1 15:17:58 CEST 2004 - werner@suse.de

- Change signal behaviour of blogd (try to fix bug #40474)
- Add ioctl workaround to blogd for IA64 serial console
- Do not overwrite environment of /sbin/init with comandline

-------------------------------------------------------------------
Fri May 14 16:16:50 CEST 2004 - werner@suse.de

- Catch negative return values of safein which may fix bug #34840

-------------------------------------------------------------------
Thu Mar 25 14:08:08 CET 2004 - werner@suse.de

- showconsole:
  * Do not trap into recursive symlink pointers (bug #36918)
  * Do not scan directories in /dev/ with no terminals

-------------------------------------------------------------------
Mon Mar 22 17:48:49 CET 2004 - werner@suse.de

- Fix cut&paste error

-------------------------------------------------------------------
Mon Mar 22 16:52:57 CET 2004 - werner@suse.de

- Support udev within blogd

-------------------------------------------------------------------
Wed Mar 17 17:10:35 CET 2004 - werner@suse.de

- Make clear descritption of -k option of checkproc and fix
  LSB behaviour of killproc (bug #35851)

-------------------------------------------------------------------
Fri Mar 12 14:06:32 CET 2004 - werner@suse.de

- Update of sysvinit 2.85 due better support of kernel 2.6
- Ensure that startpar close the allocated pty's (bug #35763)

-------------------------------------------------------------------
Thu Mar  4 18:52:46 CET 2004 - werner@suse.de

- Command back: use unsigned int for device numbers which works
  on both 32 and 64bit architectures and with old kernels

-------------------------------------------------------------------
Wed Mar  3 18:55:48 CET 2004 - werner@suse.de

- Use largest int type for device numbers

-------------------------------------------------------------------
Fri Feb 27 16:42:48 CET 2004 - werner@suse.de

- Be sure not to fail if startproc is called on fast systems

-------------------------------------------------------------------
Thu Feb 26 14:39:01 CET 2004 - werner@suse.de

- Add waiting routine on inode/dev compare of startproc binary
  and the forked off service (may fix bug #35008)

-------------------------------------------------------------------
Mon Feb 23 14:44:51 CET 2004 - werner@suse.de

- Wait on write if kernel returns with EAGAIN

-------------------------------------------------------------------
Sun Feb 22 16:31:42 CET 2004 - schwab@suse.de

- Fix use of uninitialized variable.

-------------------------------------------------------------------
Tue Jan 13 12:07:22 CET 2004 - werner@suse.de

- Update to showconsole 1.07 now with warn message if /var is ro
- Fix bug #33798: remove group write flag from package docs

-------------------------------------------------------------------
Sat Oct 18 08:50:07 CEST 2003 - kukuk@suse.de

- Move mingetty in extra package

-------------------------------------------------------------------
Wed Oct  8 19:32:47 CEST 2003 - werner@suse.de

- Use struct ut_tv on 64 bit also for utmp and not only for wtmp

-------------------------------------------------------------------
Wed Oct  8 11:27:19 CEST 2003 - werner@suse.de

- Redo the rename of barrier define to mem_barrier.

-------------------------------------------------------------------
Tue Oct  7 16:17:55 CEST 2003 - werner@suse.de

- Use the not document struct ut_tv on 64 bit for utmp (bug #32086)
- blogd: Small optimization at ring buffer handling

-------------------------------------------------------------------
Tue Sep 30 10:34:48 CEST 2003 - kukuk@suse.de

- Rename barrier define to mem_barrier (to avoid clash with kernel
  headers)

-------------------------------------------------------------------
Tue Sep  9 13:57:36 CEST 2003 - werner@suse.de

- Reenable fdatasync in blogd because linuxpthreads are fixed now

-------------------------------------------------------------------
Mon Sep  8 16:12:01 CEST 2003 - werner@suse.de

- blogd: Be sure that _REENTRANT is defined for libconsole.c

-------------------------------------------------------------------
Mon Sep  8 13:58:14 CEST 2003 - werner@suse.de

- blogd: Simply use locking information on broadcast lock, use
  thread join lock only if the writing thread is going to sleep.

-------------------------------------------------------------------
Fri Sep  5 15:28:26 CEST 2003 - werner@suse.de

- Add simple program to check for serial lines on /dev/console to
  replace the wrong serial check during boot with newer kernels

-------------------------------------------------------------------
Tue Sep  2 16:59:53 CEST 2003 - werner@suse.de

- Add workaround for blogd crash on x86_64 (bug #29750,29249,29545)
  * Be paranoid and use SysV signal handling to ensure restart
  * Be paranoid and check always the value of FILE pointer flog

-------------------------------------------------------------------
Wed Aug  6 15:16:42 CEST 2003 - werner@suse.de

- Change detection of serial versus terminal lines (bug #28490)

-------------------------------------------------------------------
Thu Jul 24 11:38:21 CEST 2003 - uli@suse.de

- fixed to build on s390x

-------------------------------------------------------------------
Thu Jul  3 16:26:26 CEST 2003 - werner@suse.de

- Make flags transparent in startproc.c

-------------------------------------------------------------------
Thu Jul  3 14:41:13 CEST 2003 - werner@suse.de

- Make killproc compliant with newest LSB spec (bug #24909)

-------------------------------------------------------------------
Tue Jun 24 13:14:47 CEST 2003 - werner@suse.de

- Ditto

-------------------------------------------------------------------
Mon Jun 23 19:00:27 CEST 2003 - werner@suse.de

- Make it build even on s390/s390x

-------------------------------------------------------------------
Mon Jun 23 10:57:56 CEST 2003 - kukuk@suse.de

- Remove not packaged files from buildroot.

-------------------------------------------------------------------
Mon Jun 23 09:26:25 CEST 2003 - kukuk@suse.de

- Remove compat link for old SPARC kernel

-------------------------------------------------------------------
Tue Jun 17 15:55:04 CEST 2003 - werner@suse.de

- Use BuildRoot
- Add startproc (0.42), thanks to Michael
- showconsole: check for environment variable NOTIOCGDEV

-------------------------------------------------------------------
Fri Jun  6 14:35:51 CEST 2003 - mfabian@suse.de

- also set the scroll region to the full window (ESC [ r) when
  --noclear is not set.

-------------------------------------------------------------------
Thu Jun  5 17:33:52 CEST 2003 - mfabian@suse.de

- if the option "--noclear" is not set, don't write a full reset
  because this leaves the unicode mode again if the terminal was in
  unicode mode and it also undos the ESC sequences in CONSOLE_MAGIC
  which are needed for some languages/console-fonts.
  Just put the cursor the home position (ESC [ H) and erase
  everything below the cursor (ESC [ J).

-------------------------------------------------------------------
Thu May 15 18:31:14 CEST 2003 - werner@suse.de

- New showconsole/blogd version 1.06
  * Threaded I/O stuff

-------------------------------------------------------------------
Tue Apr 29 17:49:16 CEST 2003 - werner@suse.de

- New showconsole/blogd version 1.05
  * Do not overwrite ring buffer memory in case of the fifo
  * Avoid not needed new line in case of carriage return.
  * Read at least 3 seconds at blogd close and flush all I/O
 
-------------------------------------------------------------------
Mon Apr 14 17:42:46 CEST 2003 - werner@suse.de

- Fix script handling of killproc for several kernel versions
  (bug #25767)

-------------------------------------------------------------------
Tue Mar  4 18:08:25 CET 2003 - werner@suse.de

- Correct exit codes of killproc and update manual page about this

-------------------------------------------------------------------
Fri Nov 22 19:38:39 CET 2002 - werner@suse.de

- Be less memory consuming with showconsole 1.04

-------------------------------------------------------------------
Thu Nov 21 14:49:37 CET 2002 - werner@suse.de

- New showconsole 1.03
  * be able to scan dirs under /dev/ in fallback case

-------------------------------------------------------------------
Thu Nov 14 14:06:19 CET 2002 - werner@suse.de

- Update to mingetty 0.9.6s
  * Be sure to get controlling tty
  * Avoid overruns in string handling

-------------------------------------------------------------------
Wed Nov 13 18:29:10 CET 2002 - werner@suse.de

- Update to showconsole 1.02 (a cleanup version)
- Update to mingetty 0.9.5s (s stand for SuSE)
  * New old option for avoiding vcs/vcsa hangup, terminal
    reset, and the usage of the glibc for updating wtmp.
  * Now the default terminal type can be set at compile
    time as an make option.

-------------------------------------------------------------------
Wed Nov 13 14:41:15 CET 2002 - werner@suse.de

- Update to killproc 2.05:
  * Change usleep which now calls sched_yield() for 0 microseconds

-------------------------------------------------------------------
Tue Nov 12 16:06:30 CET 2002 - werner@suse.de

- Update to killproc 2.04:
  * Better symlink handling
  * New dialog prompt handling for services
  * New chroot option.

-------------------------------------------------------------------
Mon Nov 11 00:30:06 CET 2002 - ro@suse.de

- fixed deprecated multiline string literal

-------------------------------------------------------------------
Mon Nov  4 19:12:03 CET 2002 - werner@suse.de

- Use usleep(1) in startproc/killproc/killall5 to force the
  kernel to run the scheduler.

-------------------------------------------------------------------
Fri Aug 16 14:20:27 CEST 2002 - werner@suse.de

- Add PreReq (bug #18005)
- Not only blogger and blogd but also set and showconsole together
  with their manual pages.

-------------------------------------------------------------------
Thu Aug  8 13:48:46 CEST 2002 - ihno@suse.de

- adding blogger and blogd to s390/s390x

-------------------------------------------------------------------
Fri Aug  2 13:01:11 CEST 2002 - froh@suse.de

- removed blogger from s390&s390x package lists
- changed 'ifarch s390' and 'ifarch s390x' to 'ifarch s390 s390x'

-------------------------------------------------------------------
Tue Jul 16 16:07:19 CEST 2002 - werner@suse.de

- Expand possible pid string length from 22 to 255

-------------------------------------------------------------------
Fri Jul  5 14:09:36 CEST 2002 - werner@suse.de

- Re-enable SIGINT in case or re-reading inittab (bug #16469)

-------------------------------------------------------------------
Thu Jul  4 17:58:41 CEST 2002 - werner@suse.de

- Update to killproc 2.03
- Fix pointer for ioctl in libconsole of showconsole

-------------------------------------------------------------------
Tue Apr 30 13:37:48 CEST 2002 - werner@suse.de

- Even if no blogd is used on S390x, the libblogger is required

-------------------------------------------------------------------
Mon Apr 29 18:35:14 CEST 2002 - werner@suse.de

- Avoid trouble with stupid gcc 3.1 parser and inlined macros.

-------------------------------------------------------------------
Thu Apr 25 18:57:56 CEST 2002 - werner@suse.de

- changes on mingetty (new version 0.9.4c)
  * Add support for other TTY devices than virtual console
  * Add nohost patch from Anders ??

-------------------------------------------------------------------
Mon Apr 22 15:20:08 CEST 2002 - sf@suse.de

- changed path to libcrypt in Makefile to also compile 
  on lib64-archs

-------------------------------------------------------------------
Tue Feb 12 02:11:38 CET 2002 - ro@suse.de

- fix owner/group

-------------------------------------------------------------------
Tue Jan 15 12:25:25 CET 2002 - werner@suse.de

- Different usage messages for startproc and start_daemon (#12692)

-------------------------------------------------------------------
Fri Dec 14 18:37:33 CET 2001 - werner@suse.de

- Skip spinner of fsck/e2fsck in boot logging file

-------------------------------------------------------------------
Mon Oct  1 19:31:43 CEST 2001 - werner@suse.de

- Build and install utmpdump

-------------------------------------------------------------------
Mon Oct  1 18:26:05 CEST 2001 - werner@suse.de

- Move to SysVinit 2.82 and migrate our patches to 2.82

-------------------------------------------------------------------
Tue Sep 25 17:50:22 CEST 2001 - werner@suse.de

- Fix race on waiting on console I/O: just try open log file first

-------------------------------------------------------------------
Thu Sep 20 14:54:27 CEST 2001 - werner@suse.de

- Ignore interrupted waitpid(2) calls

-------------------------------------------------------------------
Wed Sep 19 19:47:16 CEST 2001 - werner@suse.de

- Add forgotten configuration of powerd

-------------------------------------------------------------------
Wed Sep 19 14:19:53 CEST 2001 - werner@suse.de

- Update to powerd 2.0.2 because this version initialize the
  serial interface which seems to be required for kernel 2.4.x

-------------------------------------------------------------------
Fri Sep  7 17:29:01 CEST 2001 - werner@suse.de

- startproc: close boot logging FIFO before executing a daemon.

-------------------------------------------------------------------
Wed Sep  5 13:34:07 CEST 2001 - werner@suse.de

- blogd: really read the console a half second (bug #9899)

-------------------------------------------------------------------
Tue Sep  4 12:51:04 CEST 2001 - werner@suse.de

- Add waitpid() loop nodead lock patch of Andrea
- Add a check in the waitpid() loop to exit on failure

-------------------------------------------------------------------
Thu Aug 30 16:16:35 CEST 2001 - werner@suse.de

- Make blogd/showconsole more robustly against errors
- Add some fixes of bug #9898

-------------------------------------------------------------------
Fri Aug 24 18:04:27 CEST 2001 - werner@suse.de

- Activate 64 bit file handling interface (large file support)

-------------------------------------------------------------------
Thu Aug 23 14:01:03 CEST 2001 - werner@suse.de

- Do not reset terminal device of /dev/console if on a serial line

-------------------------------------------------------------------
Tue Jun 26 12:35:39 CEST 2001 - cstein@suse.de

- added a patch for the shutdown messages (see bug #8076)
  (also changed some other strings in shutdown.c)

-------------------------------------------------------------------
Mon Jun 25 17:25:39 CEST 2001 - bk@suse.de

- back out read return 0 patch and don't build showconsole on s390x

-------------------------------------------------------------------
Mon Jun 25 14:38:13 CEST 2001 - bk@suse.de

- don't include showconsole programs in filelist on s390x

-------------------------------------------------------------------
Fri Jun 22 13:47:07 CEST 2001 - bk@suse.de

- blogd: when read return 0, this means EOF - don't loop in this case.

-------------------------------------------------------------------
Tue Jun 12 13:04:48 EDT 2001 - bk@suse.de

- don't try to build showconsole on s390x(not supported by kernel)

-------------------------------------------------------------------
Wed May 23 16:10:59 CEST 2001 - werner@suse.de

- Do not eat up argv and environ at boot logging in startproc

-------------------------------------------------------------------
Wed May 23 12:04:04 CEST 2001 - werner@suse.de

- New killproc version 2.01: now we're able again to find deamons
  based on scripts.
- Make fifo /dev/blog after installation if not exist.

-------------------------------------------------------------------
Tue May  8 15:31:17 CEST 2001 - werner@suse.de

- Remove previous barrier() calls but use them on empty loops.

-------------------------------------------------------------------
Wed May  2 19:21:37 CEST 2001 - werner@suse.de

- Call umask only once for all init processes (pid 1 and others)
- Add some barrier() against officious compiler
- Rename cpp macro TEST to SYSVINIT_TEST

-------------------------------------------------------------------
Tue Apr 24 16:43:19 CEST 2001 - werner@suse.de

- Add default umask 022 at boot time

-------------------------------------------------------------------
Tue Apr 17 17:58:59 CEST 2001 - werner@suse.de

- Few minor changes to killproc and co.

-------------------------------------------------------------------
Thu Apr 12 16:57:53 CEST 2001 - werner@suse.de

- Disable boot logging and boot message redirection at common
  runlevels if TIOCGDEV is missed.

-------------------------------------------------------------------
Wed Apr 11 14:39:25 CEST 2001 - werner@suse.de

- blogd: complain about missing ioctl TIOCGDEV at compile
  and run time

-------------------------------------------------------------------
Wed Apr  4 18:07:57 CEST 2001 - werner@suse.de

- After fork reset signal handling of startproc to default for
  common signals

-------------------------------------------------------------------
Thu Mar 22 15:55:13 CET 2001 - werner@suse.de

- Startproc/killproc: handle by RPM moved and deleted exe links

-------------------------------------------------------------------
Wed Mar 21 18:41:12 CET 2001 - werner@suse.de

- Add patch for rlstat() of schowconsole (Andreas Schwab)

-------------------------------------------------------------------
Mon Mar 19 14:49:25 CET 2001 - werner@suse.de

- Startproc/killproc: handle deleted exe links

-------------------------------------------------------------------
Fri Mar  9 11:57:22 CET 2001 - werner@suse.de

- Add forgotten usleep to file list

-------------------------------------------------------------------
Wed Feb 14 16:58:04 CET 2001 - werner@suse.de

- Use sysvinit 2.78.4
- Spilt dif into several patches
- Use static on the most functions of init.c
- Integrate showconsole
- bzip tar's

-------------------------------------------------------------------
Mon Feb  5 18:27:03 CET 2001 - werner@suse.de

- Update of killproc to version 2.00
  * LSB conform exit values
  * Use boot logging provided by showconsole-0.9.tar.gz of aaa_base
  * New program usleep

-------------------------------------------------------------------
Mon Jan 15 18:07:07 CET 2001 - werner@suse.de

- Make strncmp of exe link and fullname working upto MAXNAMLEN

-------------------------------------------------------------------
Tue Jan  9 15:02:17 CET 2001 - werner@suse.de

- Use int instead of kdev_t in bootlogd.c

-------------------------------------------------------------------
Wed Nov 29 18:10:29 CET 2000 - werner@suse.de

- Make tty settings for sulogin working, and enable job control.
- Workaround vor sigfholder (may kernel bug)

-------------------------------------------------------------------
Tue Nov 28 18:57:43 CET 2000 - werner@suse.de

- New and fixed killproc version 1.17
- Change some man pages of sysvinit to fit our new boot scheme
- Enable tty settings for sulogin, should be checked on
  serial console (BTW: SHOULD we DO that?).

-------------------------------------------------------------------
Thu Nov 16 08:56:05 CET 2000 - ro@suse.de

- fixed install for killproc

-------------------------------------------------------------------
Wed Nov 15 16:54:01 CET 2000 - werner@suse.de

- New killproc version (1.16)
  * base name allowed
  * protected the parent of the parent
  * provide pidofproc (a link to checkproc for a verbose checkproc)
  * provide stat_daemon (a link to statproc)

-------------------------------------------------------------------
Mon Oct 23 14:56:30 CEST 2000 - werner@suse.de

- changes on mingetty (new version 0.9.4b)
  * On ro files systems chmod/chown shouldn't force an exit.
  * Therefore we need a warn message.
  * Due to the lack of a revoke system call we signal
    all file holders including the mmaping processes.

-------------------------------------------------------------------
Wed Jun 28 09:42:32 CEST 2000 - bk@suse.de

- enabled reboot on s390

-------------------------------------------------------------------
Sun Jun 25 23:36:30 CEST 2000 - bk@suse.de

- removed some not needed files on s390

-------------------------------------------------------------------
Tue May 30 15:28:25 CEST 2000 - werner@suse.de

- Correct path of powerstatus (/var/run/powerstatus) of powerd

-------------------------------------------------------------------
Wed May 24 14:54:41 CEST 2000 - garloff@suse.de

- Added minimal docu for swsusp.

-------------------------------------------------------------------
Tue May 23 18:55:02 CEST 2000 - werner@suse.de

- New killproc version 1.15 reading exe link for kernel 2.2

-------------------------------------------------------------------
Wed May 17 20:24:56 CEST 2000 - garloff@suse.de

- Added software-suspend support to init.
- login option of mingetty limits logname to 42 chars.

-------------------------------------------------------------------
Wed May 10 23:29:56 CEST 2000 - garloff@suse.de

- Working patch for mingetty to support devfs.

-------------------------------------------------------------------
Wed May 10 17:29:30 CEST 2000 - garloff@suse.de

- Preliminary patch for devfs.

-------------------------------------------------------------------
Wed May 10 16:31:21 CEST 2000 - garloff@suse.de

- Make it more secure by passing the logname as one arg and by
  checking for a leading '-'. The manpage tells the sysadmin
  about possible risks now.

-------------------------------------------------------------------
Tue May  9 23:35:29 CEST 2000 - garloff@suse.de

- Added new options --login and --logopts to mingetty, so you may
  create an inittab entry using ssh for login or similar

-------------------------------------------------------------------
Tue Mar  7 20:59:43 CET 2000 - werner@suse.de

- Ignore SIGTERM for syslogd because this daemon use that signal
  to control the parent process.
- Make read/write of /etc/ioctrl.save EINTR safe
- Use defined special character given from <termios.h>
- No flow control (-ixon), ignore break (ignbrk), and make nl/cr
  more usable (sane).
- Set the terminal line immediately

-------------------------------------------------------------------
Mon Mar  6 14:14:52 CET 2000 - werner@suse.de

- Avoid script handling for kernel threads

-------------------------------------------------------------------
Sun Mar  5 22:53:25 CET 2000 - werner@suse.de

- If open fails -1 is returned (close bug #2200)

-------------------------------------------------------------------
Fri Mar  3 15:49:51 CET 2000 - kukuk@suse.de

- Create /usr/bin/shutdown link for UltraSPARC kernel

-------------------------------------------------------------------
Mon Feb 21 21:19:14 CET 2000 - werner@suse.de

- New version of killproc (1.1.4): fix of script handling
- New version of sysvinit (2.78) with some bug fixes

-------------------------------------------------------------------
Thu Dec 16 16:10:24 CET 1999 - werner@suse.de

- New version of killproc 1.13
  * Bug fix in handling hard links for daemons using pid files
  * Bug fix: PROC pointers should not be volatile
  * Shorten nonsleeps for none daemon programs
  
-------------------------------------------------------------------
Tue Nov  9 17:03:46 CET 1999 - werner@suse.de

- Avoid trouble with hard links of binaries

-------------------------------------------------------------------
Sun Nov  7 17:20:32 MET 1999 - kukuk@suse.de

- mingetty: Add 1900 to tm_year, it contains the years since 1900.

-------------------------------------------------------------------
Wed Nov  3 23:33:08 CET 1999 - werner@suse.de

- New killproc 1.12
  * Fix option -q of startproc
  * Fix Bug in wait4 handling of startproc
  * Fix script detection: do not handle startproc, killproc, and
    checkproc as script interpreters

-------------------------------------------------------------------
Mon Nov  1 23:21:26 MET 1999 - werner@suse.de

- Add a patch from Marius

-------------------------------------------------------------------
Fri Oct 29 16:52:55 CEST 1999 - werner@suse.de

- powerd should tell init if status is OK again

-------------------------------------------------------------------
Thu Sep 30 21:36:42 CEST 1999 - werner@suse.de

- New killproc version 1.11
  * Some small speedups
  * Minor spell correction in the manual pages
  * Allow login onto tty's
- Use RPM_OPT_FLAGS throughout

-------------------------------------------------------------------
Mon Sep 13 17:23:57 CEST 1999 - bs@suse.de

- ran old prepare_spec on spec file to switch to new prepare_spec.

-------------------------------------------------------------------
Tue Sep  7 23:01:34 CEST 1999 - werner@suse.de

- Enable mingetty resetting the terminal

-------------------------------------------------------------------
Fri Aug  6 22:27:24 CEST 1999 - werner@suse.de

- New killproc-1.10
  * startproc which is able to sleep
  * better zombie handling
     - killproc doesn't ignore zombies
     - checkproc ignores zombies without `-z' by default
     - startproc checks zombie state of child while sleeping

-------------------------------------------------------------------
Tue Jul  6 16:34:37 CEST 1999 - werner@suse.de

- Fix pts problem of shutdown (dowall.c)

-------------------------------------------------------------------
Thu Jun 24 19:09:15 CEST 1999 - werner@suse.de

- Add lastb and its manual page

-------------------------------------------------------------------
Wed Jun 23 18:37:56 CEST 1999 - werner@suse.de

- Integrate newest mingetty patch of jurix
- Update killproc version 1.9
  * be more sufficient in setting user and/or group id
- Update to sysvinit 2.76
  * Integrate newest sysvinit patch of jurix into
    our patch. The command last is part of sysvinit.

-------------------------------------------------------------------
Tue Jun 22 23:37:14 CEST 1999 - werner@suse.de

- Update to new killproc version 1.8
  * startproc knows about setsid to set up a new process session
    for the new task (option -s)
  * startproc can change the effective uid and/or gid for a process
    (option -u uid and/or -g gid)
- Make spec file more handy for newer versions.

-------------------------------------------------------------------
Mon May  3 18:17:22 CEST 1999 - werner@suse.de

- Enable killproc-1.7.dif in specs file

-------------------------------------------------------------------
Mon May  3 18:11:58 CEST 1999 - werner@suse.de

- killproc shouldn't complain a disappeared job/thread

-------------------------------------------------------------------
Mon Apr 19 17:11:01 CEST 1999 - werner@suse.de

- mingetty: reset not only /dev/tty<line> but /dev/vcs<line> and
  /dev/vcsa<line> also

-------------------------------------------------------------------
Fri Feb 26 14:59:28 MET 1999 - werner@suse.de

- New killproc vesion 1.7
  * read of /proc/ is secure against EINTR
  * handle script names ala `bash -x /usr/bin/myscript -y'

-------------------------------------------------------------------
Mon Jan 18 21:34:02 MET 1999 - werner@suse.de

- Make killproc more smart, e.g. faster
- Make startproc alpah compatible

-------------------------------------------------------------------
Thu Dec 10 18:31:42 MET 1998 - ro@suse.de

- added last manpage 
- link init static

-------------------------------------------------------------------
Tue Dec  8 15:42:07 MET 1998 - ro@suse.de

- use last from sysvinit-2.75

-------------------------------------------------------------------
Mon Nov 30 18:34:45 MET 1998 - werner@suse.de

- Close some races, unknowns, and difficulties in killproc tools

-------------------------------------------------------------------
Tue Nov 24 20:40:28 MET 1998 - werner@suse.de

- Don't blame boot script with killproc having same name as the
  controlled daemon ... new kernel doesn't need this.

-------------------------------------------------------------------
Mon Nov 16 14:20:48 MET 1998 - ro@suse.de

- install man-page for powerd

-------------------------------------------------------------------
Fri Nov 13 16:42:37 MET 1998 - werner@suse.de

- Integrate powerd-2.0 for a replacment of the obsolate old one

-------------------------------------------------------------------
Mon Nov  2 09:40:18 MET 1998 - ro@suse.de

- update to killproc-1.6

-------------------------------------------------------------------
Thu Oct 22 00:50:09 MEST 1998 - ro@suse.de

- update to killproc-1.5  (take 2)

-------------------------------------------------------------------
Thu Oct  8 17:30:47 MEST 1998 - ro@suse.de

- killproc: libinit.c output of "can't open pid file" only "#if DEBUG"

-------------------------------------------------------------------
Tue Oct  6 23:45:29 MEST 1998 - ro@suse.de

- updated killproc to get rid of a memleak

-------------------------------------------------------------------
Mon Oct  5 13:03:46 MEST 1998 - ro@suse.de

- new version: killproc-1.4

-------------------------------------------------------------------
Fri Jul  3 13:59:12 MET DST 1998 - werner@suse.de

- added killproc-1.2, a replacement of the old killproc

-------------------------------------------------------------------
Wed May  6 12:38:42 MEST 1998 - florian@suse.de

- added an option to killproc to also kill process groups:
  killproc [-SIG] [-g] prog

-------------------------------------------------------------------
Tue Nov  4 17:17:21 MET 1997 - mantel@suse.de

- creation of dev/initctl fixed

-------------------------------------------------------------------
Thu Oct 23 13:17:32 MEST 1997 - ro@suse.de

- ready for autobuild

Places

File sysvinit.changes of Package sysvinit (Revision 23029d32872400c81700c9f9f2166169)

Places