Sign Up
Log In
Log In
or
Sign Up
Places
All Projects
Status Monitor
Collapse sidebar
DISCONTINUED:openSUSE:11.1
filters
ppmtomd-1.2.dif
Overview
Repositories
Revisions
Requests
Users
Attributes
Meta
File ppmtomd-1.2.dif of Package filters
--- Makefile +++ Makefile 2005-07-26 15:41:20.000000000 +0200 @@ -13,14 +13,15 @@ # CPVALINK = Y # where to install the binary -BINDIR = /usr/local/bin +BINDIR = $(DESTDIR)/usr/bin # where to install the man page -MANDIR = /usr/local/share/man/man1 +MANDIR = $(DESTDIR)/usr/share/man/man1 # extension of the man page MANEXT = 1 # you do use gcc, don't you? CC = gcc +CFLAGS=$(RPM_OPT_FLAGS) -O2 -Wall # NOTE: optimization is recommended, as this driver does a lot # of work. Switching on optimization *does* change the output @@ -27,7 +27,7 @@ # of work. Switching on optimization *does* change the output # slightly, probably owing to slight differences in floating point # calculations. -CDEBUGFLAGS=-O2 +CDEBUGFLAGS=$(RPM_OPT_FLAGS) # if your ppm libraries are not in a standard place, uncomment # and change this. You may also need thing like -R, but if you're # on that sort of system you probably know it! @@ -44,6 +45,8 @@ $(CC) $(CDEBUGFLAGS) $(DEFAULTMODEL) -W -Wall -Wstrict-prototypes -c ppmtomd.c install: ppmtomd + mkdir -p $(BINDIR) + mkdir -p $(MANDIR) $(BININSTALL) ppmtomd $(BINDIR)/ppmtomd if [ "$(CPVALINK)" ] ; then ln -s ppmtomd $(BINDIR)/ppmtocpva ; fi $(MANINSTALL) ppmtomd.man $(MANDIR)/ppmtomd.$(MANEXT) --- ppmtomd.c +++ ppmtomd.c 2005-07-26 15:53:59.000000000 +0200 @@ -1652,23 +1652,25 @@ #define HT_Y_Y 4 #define HT_Y_Z 5 +#define ABS(a) ((a) >= 0 ? (a) : -(a)) + htinfo kht = { { /* under colours shouldn't be halftoned, but just in case */ - { 0, 0, 0, HT_K_X, abs(HT_K_Y), HT_K_Z,(HT_K_Y < 0), 0,0,0,0,0,0,0,0,0,0,0,0,0,0}, - { 0, 0, 0, HT_K_X, abs(HT_K_Y), HT_K_Z,(HT_K_Y < 0), 0,0,0,0,0,0,0,0,0,0,0,0,0,0}, - { 0, 0, 0, HT_K_X, abs(HT_K_Y), HT_K_Z,(HT_K_Y < 0), 0,0,0,0,0,0,0,0,0,0,0,0,0,0}, - { 0, 0, 0, HT_K_X, abs(HT_K_Y), HT_K_Z,(HT_K_Y < 0), 0,0,0,0,0,0,0,0,0,0,0,0,0,0}, - { 0, 0, 0, HT_C_X, abs(HT_C_Y), HT_C_Z,(HT_C_Y < 0), 0,0,0,0,0,0,0,0,0,0,0,0,0,0 }, - { 0, 0, 0, HT_M_X, abs(HT_M_Y), HT_M_Z,(HT_M_Y < 0), 0,0,0,0,0,0,0,0,0,0,0,0,0,0}, - { 0, 0, 0, HT_Y_X, abs(HT_Y_Y), HT_Y_Z,(HT_Y_Y < 0), 0,0,0,0,0,0,0,0,0,0,0,0,0,0}, - { 0, 0, 0, HT_K_X, abs(HT_K_Y), HT_K_Z,(HT_K_Y < 0), 0,0,0,0,0,0,0,0,0,0,0,0,0,0}, + { 0, 0, 0, HT_K_X, ABS(HT_K_Y), HT_K_Z,(HT_K_Y < 0), 0,0,0,0,0,0,0,0,0,0,0,0,0,0}, + { 0, 0, 0, HT_K_X, ABS(HT_K_Y), HT_K_Z,(HT_K_Y < 0), 0,0,0,0,0,0,0,0,0,0,0,0,0,0}, + { 0, 0, 0, HT_K_X, ABS(HT_K_Y), HT_K_Z,(HT_K_Y < 0), 0,0,0,0,0,0,0,0,0,0,0,0,0,0}, + { 0, 0, 0, HT_K_X, ABS(HT_K_Y), HT_K_Z,(HT_K_Y < 0), 0,0,0,0,0,0,0,0,0,0,0,0,0,0}, + { 0, 0, 0, HT_C_X, ABS(HT_C_Y), HT_C_Z,(HT_C_Y < 0), 0,0,0,0,0,0,0,0,0,0,0,0,0,0}, + { 0, 0, 0, HT_M_X, ABS(HT_M_Y), HT_M_Z,(HT_M_Y < 0), 0,0,0,0,0,0,0,0,0,0,0,0,0,0}, + { 0, 0, 0, HT_Y_X, ABS(HT_Y_Y), HT_Y_Z,(HT_Y_Y < 0), 0,0,0,0,0,0,0,0,0,0,0,0,0,0}, + { 0, 0, 0, HT_K_X, ABS(HT_K_Y), HT_K_Z,(HT_K_Y < 0), 0,0,0,0,0,0,0,0,0,0,0,0,0,0}, /* spot colours shouldn't be halftoned, but just in case */ - { 0, 0, 0, HT_K_X, abs(HT_K_Y), HT_K_Z,(HT_K_Y < 0), 0,0,0,0,0,0,0,0,0,0,0,0,0,0}, - { 0, 0, 0, HT_K_X, abs(HT_K_Y), HT_K_Z,(HT_K_Y < 0), 0,0,0,0,0,0,0,0,0,0,0,0,0,0}, - { 0, 0, 0, HT_K_X, abs(HT_K_Y), HT_K_Z,(HT_K_Y < 0), 0,0,0,0,0,0,0,0,0,0,0,0,0,0}, - { 0, 0, 0, HT_K_X, abs(HT_K_Y), HT_K_Z,(HT_K_Y < 0), 0,0,0,0,0,0,0,0,0,0,0,0,0,0} + { 0, 0, 0, HT_K_X, ABS(HT_K_Y), HT_K_Z,(HT_K_Y < 0), 0,0,0,0,0,0,0,0,0,0,0,0,0,0}, + { 0, 0, 0, HT_K_X, ABS(HT_K_Y), HT_K_Z,(HT_K_Y < 0), 0,0,0,0,0,0,0,0,0,0,0,0,0,0}, + { 0, 0, 0, HT_K_X, ABS(HT_K_Y), HT_K_Z,(HT_K_Y < 0), 0,0,0,0,0,0,0,0,0,0,0,0,0,0}, + { 0, 0, 0, HT_K_X, ABS(HT_K_Y), HT_K_Z,(HT_K_Y < 0), 0,0,0,0,0,0,0,0,0,0,0,0,0,0} } }; @@ -2547,7 +2549,7 @@ to fix that. */ if ( i != firstcomp ) { sprintf(buffer,"\033*rC"); /* end raster graphics */ - page_info.out_function(page_info.comp_fds[i],buffer,4); + page_info.out_function(page_info.comp_fds[i],(unsigned char*)buffer,4); } /* set curl correction on or off. We always set it, even though the manual claims that curl @@ -2557,20 +2559,20 @@ curlco = ( !opt_curlcorrection && ( i < firstinlast || opt_overlay || opt_nocurl )); sprintf(buffer,"\033\032%c%cC",curlco,0); - page_info.out_function(page_info.comp_fds[i],buffer,5); + page_info.out_function(page_info.comp_fds[i],(unsigned char*)buffer,5); /* if overlay mode was requested, set multipage mode again */ if ( opt_overlay ) { sprintf(buffer,"\033\032%c%cA",1,0); - page_info.out_function(page_info.comp_fds[i],buffer,5); + page_info.out_function(page_info.comp_fds[i],(unsigned char*)buffer,5); } /* set the transfer mode again */ sprintf(buffer,"\033*r%cU", page_info.print_mode[i]); - page_info.out_function(page_info.comp_fds[i],buffer,5); + page_info.out_function(page_info.comp_fds[i],(unsigned char*)buffer,5); /* and start raster graphics again */ sprintf(buffer,"\033*r%cA",0); - page_info.out_function(page_info.comp_fds[i],buffer,5); + page_info.out_function(page_info.comp_fds[i],(unsigned char*)buffer,5); } if ( c >= 0 ) { /* Now send the colour selection command. @@ -2587,7 +2589,7 @@ ((i == lastcomp) && lastpass) ? 0x80 : 0 /* this is the last plane flag */, (page_info.print_mode[i] == cassettePlane) ? 'c' : 'r'); - page_info.out_function(page_info.comp_fds[i],buffer,5); + page_info.out_function(page_info.comp_fds[i],(unsigned char*)buffer,5); } } } @@ -2607,7 +2609,7 @@ if ( fd < 0 || fd == STDOUT ) continue; /* back feed the paper */ sprintf(buffer,"\033\032%c%c\014",0,0); - page_info.out_function(STDOUT,buffer,5); + page_info.out_function(STDOUT,(unsigned char*)buffer,5); lseek(fd,0,SEEK_SET); while ( (n = read(fd,buf,1024)) > 0 ) { write(1,buf,n); @@ -2636,7 +2638,7 @@ if (page_info.output_type < ppmOut && !feof(ifd) ) { sprintf(buffer,"\014"); /* formfeed */ - page_info.out_function(STDOUT,buffer,1); + page_info.out_function(STDOUT,(unsigned char*)buffer,1); } } @@ -2649,7 +2651,7 @@ nothing else. */ if ( ! lastpass ) { sprintf(buffer,"\033\032%c%c\014",0,0); - page_info.out_function(STDOUT,buffer,5); + page_info.out_function(STDOUT,(unsigned char*)buffer,5); } else { /* If the ffonly switch is set, then we will form-feed and stay in data transfer mode. Otherwise, we will @@ -2657,17 +2659,17 @@ exit RGL mode, and reset the printer */ if ( !ffonly ) { sprintf(buffer,"\033*rC"); /* end raster graphics */ - page_info.out_function(STDOUT,buffer,4); + page_info.out_function(STDOUT,(unsigned char*)buffer,4); } sprintf(buffer,"\014"); /* formfeed */ - page_info.out_function(STDOUT,buffer,1); + page_info.out_function(STDOUT,(unsigned char*)buffer,1); /* end rgl mode */ sprintf(buffer,"\033%%%cX",0); - page_info.out_function(STDOUT,buffer,4); + page_info.out_function(STDOUT,(unsigned char*)buffer,4); /* unless overlay or no reset, do a printer reset */ if ( !opt_noreset && !opt_overlay ) { sprintf(buffer,"\033e"); /* full printer reset */ - page_info.out_function(STDOUT,buffer,2); + page_info.out_function(STDOUT,(unsigned char*)buffer,2); } } } @@ -2807,41 +2809,41 @@ { char buffer[80]; /* buffer for printing */ - page_info->out_function(fd,"\033%\200A",4); /* select RGL mode */ /* resolution defaults to 600 dpi */ + page_info->out_function(fd,(unsigned char*)"\033%\200A",4); /* select RGL mode */ /* resolution defaults to 600 dpi */ sprintf(buffer,"\033*t%cR",page_info->output_resolution); - page_info->out_function(fd,buffer,6); + page_info->out_function(fd,(unsigned char*)buffer,6); /* media type and fineness code */ sprintf(buffer,"\033&l%c%cM", media_byte1[page_info->media_type], media_byte2[page_info->media_type]); - page_info->out_function(fd,buffer,6); + page_info->out_function(fd,(unsigned char*)buffer,6); sprintf(buffer,"\033&l%c%cA",page_info->paper_size,0); /* select paper size */ - page_info->out_function(fd,buffer,6); + page_info->out_function(fd,(unsigned char*)buffer,6); /* page length, if set */ if ( opt_pagelength ) { sprintf(buffer,"\033&l%c%cP",opt_pagelength%256,opt_pagelength/256); - page_info->out_function(fd,buffer,6); + page_info->out_function(fd,(unsigned char*)buffer,6); } /* page width, if given by user */ if ( opt_pagewidth ) { sprintf(buffer,"\033&a%c%cM",opt_pagewidth%256,opt_pagewidth/256); - page_info->out_function(fd,buffer,6); + page_info->out_function(fd,(unsigned char*)buffer,6); } /* line feed adjustment */ if ( page_info->lfadj != 0 ) { sprintf(buffer,"\033\032%c%cL",(char) page_info->lfadj,0); - page_info->out_function(fd,buffer,5); + page_info->out_function(fd,(unsigned char*)buffer,5); } /* print head drive signal adjustment */ if ( opt_phadj != 0 ) { sprintf(buffer,"\033\032%c%cV",(char) opt_phadj,0); - page_info->out_function(fd,buffer,5); + page_info->out_function(fd,(unsigned char*)buffer,5); } /* make ff mean tof in overlay mode */ if ( opt_overlay ) { sprintf(buffer,"\033\032%c%cA",1,0); - page_info->out_function(fd,buffer,5); + page_info->out_function(fd,(unsigned char*)buffer,5); } /* on 5000 etc, specify cassettes to be used */ @@ -2861,25 +2863,25 @@ num++; } buffer[3] = num; - page_info->out_function(fd,buffer,num+6); + page_info->out_function(fd,(unsigned char*)buffer,num+6); } /* now the x and y offsets (if positive; if negative, we have to deal with them) */ if (page_info->x_shift > 0 ) { sprintf(buffer,"\033&a%c%cL", page_info->x_shift%256, page_info->x_shift/256); - page_info->out_function(fd,buffer,6); + page_info->out_function(fd,(unsigned char*)buffer,6); } if ( page_info->y_shift > 0 ) { sprintf(buffer,"\033&l%c%cE", page_info->y_shift%256,page_info->y_shift/256); - page_info->out_function(fd,buffer,6); + page_info->out_function(fd,(unsigned char*)buffer,6); } /* if glossy finish, request it ... */ if ( opt_glossy ) { sprintf(buffer,"\033\032%c%cO",0,0); - page_info->out_function(fd,buffer,5); + page_info->out_function(fd,(unsigned char*)buffer,5); } } @@ -3535,7 +3537,7 @@ } if ( ppmout ) { - prn_out(STDOUT,(char *)(pixels),cols); + prn_out(STDOUT,(unsigned char *)(pixels),cols); } else { int j; /* now we need to pack the bytes and pass them to the @@ -3562,7 +3564,7 @@ if ( page_info->nybble_mode[i] ) { n = packnybbles(outbytes[i][0],cols,outu); } else { - n = packbits(outbytes[i][0],cols,outu,outc); + n = packbits((char*)outbytes[i][0],cols,(char*)outu,(char*)outc); } } else { /* if we are in a multiplane raster mode, we @@ -3599,28 +3601,28 @@ if ( n >= 0 ) { if ( compression[tag] != 0 ) { /* select uncompressed */ - sprintf(buffer,"\033*b%c%cM",0,0); + sprintf((char*)buffer,"\033*b%c%cM",0,0); prn_out(fd,buffer,6); compression[tag] = 0; } } else { if ( compression[tag] != 1 ) { /* select compressed */ - sprintf(buffer,"\033*b%c%cM",2,0); + sprintf((char*)buffer,"\033*b%c%cM",2,0); prn_out(fd,buffer,6); compression[tag] = 1; } } /* do we have some rows to skip ? */ if ( rowstoskip[i] ) { - sprintf(buffer,"\033*b%c%cY",rowstoskip[i]%256,rowstoskip[i]/256); + sprintf((char*)buffer,"\033*b%c%cY",rowstoskip[i]%256,rowstoskip[i]/256); prn_out(fd,buffer,6); rowstoskip[i] = 0; } /* if we are in 4-color raster mode, we have to select the cassette for every row transferred. Sigh. */ if ( page_info->print_mode[i] == cassetteRaster ) { - sprintf(buffer,"\033\032%c%cc",page_info->comp_colours[i],0); + sprintf((char*)buffer,"\033\032%c%cc",page_info->comp_colours[i],0); prn_out(fd,buffer,5); } /* Another horrible hack for -usemulti. We are printing @@ -3628,11 +3630,11 @@ have to print a null row for K to the CMY component before we print C */ if ( opt_usemulti && i == compC ) { - sprintf(buffer,"\033*b%c%cV",0,0); + sprintf((char*)buffer,"\033*b%c%cV",0,0); prn_out(fd,buffer,6); } /* create the printer command */ - sprintf(buffer,"\033*b%c%c%c", + sprintf((char*)buffer,"\033*b%c%c%c", (n>=0 ? n : -n)%256,(n>=0 ? n : -n)/256, /* do we advance the raster pointer? We don't if it's the last row; and we
Locations
Projects
Search
Status Monitor
Help
OpenBuildService.org
Documentation
API Documentation
Code of Conduct
Contact
Support
@OBShq
Terms
openSUSE Build Service is sponsored by
The Open Build Service is an
openSUSE project
.
Sign Up
Log In
Places
Places
All Projects
Status Monitor