File sg3_utils.spec of Package sg3_utils

Overview Repositories Revisions Requests Users Attributes Meta

File sg3_utils.spec of Package sg3_utils

#
# spec file for package sg3_utils (Version 1.27)
#
# Copyright (c) 2009 SUSE LINUX Products GmbH, Nuernberg, Germany.
#
# All modifications and additions to the file contributed by third parties
# remain the property of their copyright owners, unless otherwise agreed
# upon. The license for this file, and modifications and additions to the
# file, is the same license as for the pristine package itself (unless the
# license for the pristine package is not an Open Source License, in which
# case the license is the MIT License). An "Open Source License" is a
# license that conforms to the Open Source Definition (Version 1.9)
# published by the Open Source Initiative.

# Please submit bugfixes or comments via http://bugs.opensuse.org/
#

Url:            http://sg.torque.net/sg/sg3_utils.html

Name:           sg3_utils
%define sgver 	1.27
License:        BSD 3-clause (or similar) ; GPL v2 only ; GPL v2 or later
Group:          Hardware/Other
Provides:       sg_utils
Provides:       scsi
Obsoletes:      scsi <= 1.7_2.38_1.25_0.19_1.02_0.93
AutoReqProv:    on
PreReq:         %insserv_prereq
Version:        1.27
Release:        20
Summary:        A collection of tools that send SCSI commands to devices
Source:         http://sg.torque.net/sg/p/sg3_utils-%{sgver}.tar.bz2
Source2:        http://www.garloff.de/kurt/linux/rescan-scsi-bus.sh
BuildRoot:      %{_tmppath}/%{name}-%{version}-build

%description
The sg3_utils package contains utilities that send SCSI commands to
devices. As well as devices on transports traditionally associated with
SCSI (e.g. Fibre Channel (FCP), Serial Attached SCSI (SAS) and the SCSI
Parallel Interface(SPI)) many other devices use SCSI command sets.
ATAPI cd/dvd drives and SATA disks that connect via a translation layer
or a bridge device are examples of devices that use SCSI command sets.

Authors:
--------
    Doug Gilbert <dgilbert@interlog.com>
    Kurt Garloff <garloff@suse.de>

%package devel
License:        BSD 3-clause (or similar) ; GPL v2 or later
Summary:        A collection of tools that send SCSI commands to devices
Group:          Development/Libraries/C and C++
AutoReqProv:    on
Requires:       %name = %version

%description devel
The sg3_utils package contains utilities that send SCSI commands to
devices. As well as devices on transports traditionally associated with
SCSI (e.g. Fibre Channel (FCP), Serial Attached SCSI (SAS) and the SCSI
Parallel Interface(SPI)) many other devices use SCSI command sets.
ATAPI cd/dvd drives and SATA disks that connect via a translation layer
or a bridge device are examples of devices that use SCSI command sets.

Authors:
--------
    Doug Gilbert <dgilbert@interlog.com>
    Kurt Garloff <garloff@suse.de>

%prep
%setup -q

%build
%configure --disable-static --with-pic
%{__make} %{?jobs:-j%jobs}

%install
%makeinstall
install -m 755 scripts/scsi_logging_level $RPM_BUILD_ROOT%{_bindir}
install -m 755 %{S:2} $RPM_BUILD_ROOT%{_bindir}
%{__rm} -f %{buildroot}%{_libdir}/*.la

%post -p /sbin/ldconfig

%postun -p /sbin/ldconfig

%files
%defattr(-,root,root)
%doc README README.sg_start 
%doc ChangeLog CREDITS NEWS
%attr(755,root,root) %{_bindir}/sg_dd
%attr(755,root,root) %{_bindir}/sg_inq
%attr(755,root,root) %{_bindir}/sg_scan
%attr(755,root,root) %{_bindir}/sg_rbuf
%attr(755,root,root) %{_bindir}/sginfo
%attr(755,root,root) %{_bindir}/sg_readcap
%attr(755,root,root) %{_bindir}/sgp_dd
%attr(755,root,root) %{_bindir}/sg_map
%attr(755,root,root) %{_bindir}/sg_turs
%attr(755,root,root) %{_bindir}/sg_test_rwbuf
#%attr(755,root,root) %{_bindir}/scsi_devfs_scan
%attr(755,root,root) %{_bindir}/sgm_dd
%attr(755,root,root) %{_bindir}/sg_read
%attr(755,root,root) %{_bindir}/sg_logs
%attr(755,root,root) %{_bindir}/sg_modes
%attr(755,root,root) %{_bindir}/sg_opcodes
%attr(755,root,root) %{_bindir}/sg_persist
%attr(755,root,root) %{_bindir}/sg_senddiag
%attr(755,root,root) %{_bindir}/sg_reset
%attr(755,root,root) %{_bindir}/sg_emc_trespass
%attr(755,root,root) %{_bindir}/sg_read_long
%attr(755,root,root) %{_bindir}/sg_requests
%attr(755,root,root) %{_bindir}/sg_ses
%attr(755,root,root) %{_bindir}/sg_verify
%attr(755,root,root) %{_bindir}/sg_write_long
%attr(755,root,root) %{_bindir}/sg_luns
%attr(755,root,root) %{_bindir}/sg_prevent
%attr(755,root,root) %{_bindir}/sg_get_config
%attr(755,root,root) %{_bindir}/sg_sync
%attr(755,root,root) %{_bindir}/sg_wr_mode
%attr(755,root,root) %{_bindir}/sg_reassign
%attr(755,root,root) %{_bindir}/sg_rtpg
%attr(755,root,root) %{_bindir}/sg_format
%attr(755,root,root) %{_bindir}/sg_rmsn
%attr(755,root,root) %{_bindir}/sg_start
%attr(755,root,root) %{_bindir}/sg_ident
%attr(755,root,root) %{_bindir}/sg_map26
%attr(755,root,root) %{_bindir}/sg_rdac
%attr(755,root,root) %{_bindir}/sg_vpd
%attr(755,root,root) %{_bindir}/sg_raw
%attr(755,root,root) %{_bindir}/sg_write_buffer
%attr(755,root,root) %{_bindir}/sg_sat_identify
%attr(755,root,root) %{_bindir}/sg_read_buffer
%attr(755,root,root) %{_bindir}/sg_safte
%attr(755,root,root) %{_bindir}/sg_sat_phy_event
%attr(755,root,root) %{_bindir}/sg_sat_set_features
%attr(755,root,root) %{_bindir}/sg_stpg
%attr(755,root,root) %{_bindir}/scsi_logging_level
%attr(755,root,root) %{_bindir}/rescan-scsi-bus.sh
%doc %{_mandir}/man8/sg_dd.8.gz
%doc %{_mandir}/man8/sgp_dd.8.gz
%doc %{_mandir}/man8/sgm_dd.8.gz
%doc %{_mandir}/man8/sg_map.8.gz
%doc %{_mandir}/man8/sg_rbuf.8.gz
%doc %{_mandir}/man8/sg_read.8.gz
%doc %{_mandir}/man8/sg_scan.8.gz
%doc %{_mandir}/man8/sginfo.8.gz
%doc %{_mandir}/man8/sg_readcap.8.gz
%doc %{_mandir}/man8/sg_turs.8.gz
%doc %{_mandir}/man8/sg_inq.8.gz
%doc %{_mandir}/man8/sg_test_rwbuf.8.gz
#%doc %{_mandir}/man8/scsi_devfs_scan.8.gz
%doc %{_mandir}/man8/sg_start.8.gz
%doc %{_mandir}/man8/sg_reset.8.gz
%doc %{_mandir}/man8/sg_modes.8.gz
%doc %{_mandir}/man8/sg_logs.8.gz
%doc %{_mandir}/man8/sg_opcodes.8.gz
%doc %{_mandir}/man8/sg_persist.8.gz
%doc %{_mandir}/man8/sg_senddiag.8.gz
%doc %{_mandir}/man8/sg_emc_trespass.8.gz
%doc %{_mandir}/man8/sg_read_long.8.gz
%doc %{_mandir}/man8/sg_requests.8.gz
%doc %{_mandir}/man8/sg_ses.8.gz
%doc %{_mandir}/man8/sg_verify.8.gz
%doc %{_mandir}/man8/sg_write_long.8.gz
%doc %{_mandir}/man8/sg_luns.8.gz
%doc %{_mandir}/man8/sg_prevent.8.gz
%doc %{_mandir}/man8/sg_get_config.8.gz
%doc %{_mandir}/man8/sg_sync.8.gz
%doc %{_mandir}/man8/sg_wr_mode.8.gz
%doc %{_mandir}/man8/sg_reassign.8.gz
%doc %{_mandir}/man8/sg_rtpg.8.gz
%doc %{_mandir}/man8/sg_format.8.gz
%doc %{_mandir}/man8/sg_rmsn.8.gz
%doc %{_mandir}/man8/sg_ident.8.gz
%doc %{_mandir}/man8/sg_map26.8.gz
%doc %{_mandir}/man8/sg_rdac.8.gz
%doc %{_mandir}/man8/sg_vpd.8.gz
%doc %{_mandir}/man8/sg_raw.8.gz
%doc %{_mandir}/man8/sg_write_buffer.8.gz
%doc %{_mandir}/man8/sg_sat_identify.8.gz
%doc %{_mandir}/man8/sg_read_buffer.8.gz
%doc %{_mandir}/man8/sg_safte.8.gz
%doc %{_mandir}/man8/sg_sat_phy_event.8.gz
%doc %{_mandir}/man8/sg_sat_set_features.8.gz
%doc %{_mandir}/man8/sg_stpg.8.gz
%doc %{_mandir}/man8/sg3_utils.8.gz
%attr(755,root,root) %{_libdir}/libsgutils2.so.*

%files devel
%defattr(644,root,root)
%attr(755,root,root) %{_libdir}/libsgutils2.so
%attr(755,root,root) %dir %{_prefix}/include/scsi
%{_prefix}/include/scsi/sg_cmds.h
%{_prefix}/include/scsi/sg_cmds_basic.h
%{_prefix}/include/scsi/sg_cmds_extra.h
%{_prefix}/include/scsi/sg_lib.h
%{_prefix}/include/scsi/sg_pt.h
%{_prefix}/include/scsi/sg_io_linux.h
%{_prefix}/include/scsi/sg_linux_inc.h
%{_prefix}/include/scsi/sg_cmds_mmc.h
%{_prefix}/include/scsi/sg_lib_data.h

%clean
test ! -z "$RPM_BUILD_ROOT" -a "$RPM_BUILD_ROOT" != "/" && rm -rf $RPM_BUILD_ROOT
rm -rf $RPM_BUILD_DIR/sg3_utils-%{sgver}

%changelog

Places

File sg3_utils.spec of Package sg3_utils

Places