File gstreamer-plugins-rs.changes of Package gstreamer-plugins-rs

Overview Repositories Revisions Requests Users Attributes Meta

File gstreamer-plugins-rs.changes of Package gstreamer-plugins-rs (Revision 4a89dad99a3b854c3fc93ddca196a595)

Currently displaying revision 4a89dad99a3b854c3fc93ddca196a595 , Show latest

-------------------------------------------------------------------
Fri Sep 22 14:29:14 UTC 2023 - Bjørn Lie <bjorn.lie@gmail.com>

- Update to version 1.22.6:
  + fallbackswitch: locking/deadlock fixes
  + onvifmetadataparse: Skip metadata frames with unrepresentable
    UTC time
  + transcriberbin: Configure audioresample in front of transcriber
  + webrtcsink:
    - Propagate GstContext messages
    - Add support for d3d11 memory and qsvh264enc
    - Fix TWCC extension adding
    - Don't forget to setup encoders for discoveries
    - NVIDIA V4L2 encoders always require NVMM memory
  + meson: Fix handling of optional deps, and don't require
    Python-3.8
- Switch service to do the tag released with the other gstreamer
  packages. Gstreamer-plugins-rs are now released at the same time
  as the gstreamer main packages.
- Switch compression to zst both in service and tarball produced.

-------------------------------------------------------------------
Tue Jul 25 11:34:26 UTC 2023 - Bjørn Lie <bjorn.lie@gmail.com>

- Update to version 0.10.11:
  + fallbackswitch:
    - Change the threshold for trailing buffers
    - Fix pad health calculation and notifies
  + fmp4mux: Fix draining in chunk mode if keyframes are too late
  + webrtcsink:
    - fix pipeline when input caps contain max-framerate
    - Configure only 4 threads for x264enc
    - Translate force-keyunit events to force-IDR action signal for
      NVIDIA encoders
    - Set config-interval=-1 and aggregate-mode=zero-latency on
      rtph264pay and rtph265pay
    - Set VP8/VP9 payloader based on payloader element factory name
- Update to version 0.10.10:
  + webrtcsink:
    - Avoid panic on unprepare from an async tokio context
    - Use correct property types for nvvideoconvert
  + webrtc/signalling: fix race condition in message ordering
  + livesync:
    - Wait for the end timestamp of the previous buffer before
      looking at queue
    - Improve EOS handling
  + videofx: Minimize dependencies of the image crate
  + togglerecord:
    - Clip segment before calculating timestamp/duration
    - Error out if main stream buffer has no valid running time

-------------------------------------------------------------------
Wed Jul  5 10:49:41 UTC 2023 - Bjørn Lie <bjorn.lie@gmail.com>

- Update to version 0.10.9:
  + Fixed:
    - mp4mux/fmp4mux: Fix byte order in Opus extension box.
    - webrtcsrc: Add twcc extension to the codec-preferences when
      present.
    - webrtcsink: Don't try using cudaconvert if it is not present.
    - mccparse: Don't offset the first timecode to a zero PTS.
    - Correctly use MPL as license specifier instead of MPL-2 for
      plugins that compile with GStreamer < 1.20.
  + Added: fallbackswitch: Add stop-on-eos property.
- Changes from version 0.10.8:
  + Fixed:
    - fmp4mux:
      . Use updated start PTS when checking if a stream is filled
        instead of a stale one.
      . Fix various issues with stream gaps, especially in the
        beginning.
      . Fix waiting in live pipelines.
    - uriplaylistbin: Prevent deadlocks during property
      notifications.
    - webrtcsink: Fix panics during twcc-stats callback and related
      issues.
    - awstranscriber: Handle stream disconts correctly.
    - roundedcorners: Fix caps negotiation to not use I420 if a
      border radius is configured.
    - whipsink: Use the correct pad template to request pads from
      the internal webrtcbin.
    - fallbacksrc: Don't apply fallback audio caps to the main
      stream.
    - webrtcsrc: Fix caps handling during transceiver creation.
  + Changed: rtpgccbwe: Improve packet handling.
- Changes from version 0.10.7:
  + Fixed:
    - ffv1dec: Drop rank until the implementation is
      feature-complete.
    - spotifyaudiosrc: Check cached credentials before use and fix
      usage of credentials cache.
    - tttocea608: Specify raw CEA608 field.
    - gtk4paintablesink: Fix compilation on non-Linux UNIX systems.
    - webrtcsrc: Don't set stun-server to the empty string if none
      was set.
    - webrtcsink: Abort statistics collection before stopping the
      signaller.
    - rtpgccbwe: Don't process empty lists.
  + Changed:
    - ndi: Update to libloading 0.8.
    - aws: Update to AWS SDK 0.55/0.27.
    - webrtcsink: Order pads by serial number.
    - Update to async-tungstenite 0.22.
  + Added: webrtcsink/webrtcsrc: Add request-encoded-filter signal
    to add support for inserting custom filters between
    encoder/payloader or depayloader/decoder. This allows
    interacting with the "insertable streams" API from Chrome.
- Disable cargo audit service for now, something is not working
  correctly in the service.
- Use %build_rustflags instead of the deprecated
  %__default_rustflags macro. Requires at least cargo-packaging
  1.2.0+3.

-------------------------------------------------------------------
Wed Apr 12 11:50:33 UTC 2023 - Bjørn Lie <bjorn.lie@gmail.com>

- Update to version 0.10.6:
  + Fixed:
    - webrtcsink: Fix max/min-bitrate property blurb/nick.
    - uriplaylistbin: Add missing queues to example.
    - tttocea608:
      . Fix pushing of caps events that sometimes contained unfixed
        caps.
      . Fix disappearing text after special character in non-popon
        mode.
    - transcriberbin:
      . Fix deadlock on construction.
      . Fix initial bin setup.
    - fallbacksrc: Handle incompatible downstream caps without
      panicking.
    - ndisrc: Fix copying of raw video frames with different
      NDI/GStreamer strides.
    - livesync: Correctly assume zero upstream latency if latency
      query fails.
  + Added: webrtcsink: Add ice-transport-policy property that
    proxies the same webrtcbin property.
- Switch to cargo-packaging: Drop cargo and rust BuildRequires and
  rustflags global. Add cargo-packaging BuildRequires and rustflags
  macro where needed. Use autosetup macro.

-------------------------------------------------------------------
Fri Mar 31 20:55:39 UTC 2023 - Bjørn Lie <bjorn.lie@gmail.com>

- Update to version 0.10.5:
  + gtk4: Fix build with OpenGL support on macOS.
  + threadshare: Fix symbol conflicts when statically linking the
    plugin.
- Enable LTO as it works fine now (use FAT lto objects).

-------------------------------------------------------------------
Thu Mar 16 08:50:57 UTC 2023 - Bjørn Lie <bjorn.lie@gmail.com>

- Update to version 0.10.4:
  * Fixed:
    - fmp4mux:
      . Return a running time from AggregatorImpl::next_time() to
        fix waiting in live pipelines.
      . Fix hls_live example to set properties on the right
        element.
    - uriplaylistbin: Reset element when switching back to NULL
      state.
    - livesync: Handle variable framerates correctly in fallback
      buffer duration calculation.
    - meson: Fix GStreamer version feature detection.
  * Added: webrtc: New webrtc element.

-------------------------------------------------------------------
Thu Mar 09 19:19:14 UTC 2023 - bjorn.lie@gmail.com

- Update to version 0.10.3:
  * Added:
    - tracers: `queue_levels` tracer now also supports printing the
      `appsrc` levels.
    - webrtc: `webrtcsink` can use `nvvidconv` if `nvvideoconvert`
      does not exist on an NVIDIA platform.
  * Fixed:
    - gtk4: Set the sync point on the video frame after mapping it
      as otherwise the frame might not be ready yet for further
      usage.
    - livesync: Correctly calculate the fallback buffer duration
      from the video framerate.
    - ndi: Handle caps changes correctly in `ndisinkcombiner`.
  * Changed: webrtc: Minor cleanup.

-------------------------------------------------------------------
Tue Mar  7 07:00:49 UTC 2023 - Antonio Larrosa <alarrosa@suse.com>

- Increase constraints so it doesn't fail to build for lack of
  disk space.

-------------------------------------------------------------------
Mon Feb 27 15:10:02 UTC 2023 - bjorn.lie@gmail.com

- Update to version 0.10.2:
  * Fixed:
    - hlssink3: Allow signal handlers to return `None`
    - gtk4:
      . Make GL context sharing more reliable in pipelines with
        multiple `gtk4paintablesinks`
      . Attach channel receiver to the main context from the
        correct thread to make it possible to start the sink from a
        different thread than the main thread without having
        retrieved the paintable from the main thread before.
    - fmp4mux/mp4mux: Ignore caps changes if only the framerate
      changes.
  * Changed: gtk4: Simplify and refactor GL context sharing. Apart
    from being more reliable this reduces GL resource usage.
- Stop using git date and commitid in version, we are using
  upstream released tags now.

-------------------------------------------------------------------
Thu Feb 16 15:14:03 UTC 2023 - Antonio Larrosa <alarrosa@suse.com>

- Disable the aws plugin in big endian architectures since it
  requires the ring crate which doesn't support big endian systems
  (see gh#briansmith/ring#1555). Fixes bsc#1208795

-------------------------------------------------------------------
Thu Feb 16 09:42:41 UTC 2023 - Antonio Larrosa <alarrosa@suse.com>

- Add BuildRequires: zstd so it build in SLE/Leap now that the
  sources are compressed with zstd

-------------------------------------------------------------------
Tue Feb 14 18:15:43 UTC 2023 - bjorn.lie@gmail.com

- Update to version 0.10.1+git20230213.9cd68ff:
  * rtpav1pay: Fix calculation of Leb128 size size to work
    correctly with streams from certain encoders.
- Changes from version 0.10.0:
  * Fixed:
    - audiornnoise: Use correct value range for the samples
    - awss3sink: Treat stopping without EOS as an error for
      multipart upload
    - awss3hlssink:
      . Fix the name of the hlssink child element
      . Fix deadlock on EOS
    - dav1d: Various fixes to improve performance, to handle
      decoding errors more gracefully and to make sure all frames
      are output in the end
    - fmp4mux: Various fixes to fragment splitting behaviour,
      output formatting and header generation
    - gtk4: Various stability and rendering fixes
    - meson: Various fixes and improvements to the meson-based
      build system
    - ndi: provide non-Linux/macOS UNIX fallback for the soname
    - ndisrc: Use default channel mask for audio output to allow >2
      channels to work better
    - rav1e: Correctly enable threading support
    - rtpav1: Various fixes to the payloader and depayloader to
      handle streams more correctly and to handle errors more
      cleanly
    - rtpav1depay: Set caps on the source pad
    - spotify: fix "start a runtime from within a runtime" with
      static link
    - textahead: fix previous buffers
    - textwrap: Don't panic on empty buffers
    - tttocea608: Don't fail if a GAP event contains no duration
    - webrtchttp: whipsink: construct TURN URL correctly
    - webrtcsink: fix panic on pre-bwe request error
    - whipsink:
      . Send ICE candidates together with the offer
      . Various cleanups and minor fixes
  * Added:
    - audiornnoise: Add voice detection threshold property
    - awss3hlssink: Add stats property
    - awss3sink: Add properties to set Content-Type and
      Content-Disposition
    - fmp4mux:
      . Add 'offset-to-zero' property
      . Add support for CMAF-style chunking, e.g. low-latency / LL
        HLS and DASH
    - fmp4mux/mp4mux:
      . Add support for muxing Opus, VP8, VP9 and AV1 streams
      . Make media/track timescales configurable
    - gtk4: Support for rendering GL textures on X11/EGL, X11/GLX,
      Wayland and macOS
    - hlssink3: Allow generating i-frame-only playlist
    - livesync: New element that alllows maintaining a contiguous
      live stream without gaps from a potentially unstable source.
    - mp4mux: New non-fragmented MP4 muxer element
    - spotifyaudiosrc: Support configurable bitrate
    - textahead: add settings to display previous buffers
    - threadshare: Introduce new ts-audiotestsrc
    - webrtcsink: Support nvv4l2vp9enc
    - whepsource: Add a WebRTC WHEP source element
  * Changed:
    - audiofx: Derive from AudioFilter where possible
    - dav1ddec: Lower rank to primary to allow usage of hardware
      decoders with higher ranks
    - fmp4mux: Only push fragment_offset if write-mfra is true to
      reduce memory usage
    - webrtcsink:
      . Make the turn-server property a turn-servers list
      . Move from async-std to tokio

-------------------------------------------------------------------
Wed Jan 25 22:24:43 UTC 2023 - bjorn.lie@gmail.com

- Update to version 0.9.8+git20230124.d9e9468:
  * aws: Update to AWS SDK 0.53/0.23
  * dav1d:
    - Don't flush the decoder when draining
    - Don't treat any kind of bitstream error immediately as fatal
    - Get rid of some unnecessary `unwrap()`s
    - Only drain at most one decoded frame per input frame unless
      the decoder requires more before accepting new data
    - Remove unnecessary frame dropping loop
  * Downgrade clap dependency to 4.0
  * gtk4:
    - Asynchronously flush frames from GDK
    - Keep `GstGLMemory` alive as long as it is used inside GDK
    - Make no caps in the allocation query a non-error
    - Only provide a buffer pool to upstream if it requested one
  * livesync: fix late-threshold property min value
  * meson:
    - Only enable cargo features when options are enabled (bis)
    - Update version to 0.9.8

-------------------------------------------------------------------
Fri Jan 13 15:12:47 UTC 2023 - bjorn.lie@gmail.com

- Update to version 0.9.5+git20230111.df3b908:
  * awss3hlssink: Add stats property.
  * aws:
    - Update to AWS SDK 0.52/0.22
    - Update to test-with 0.9
  * cargo_wrapper:
    - Fix setting of PKG_CONFIG_PATH and CARGO_TARGET_DIR
    - Handle windows paths for depfiles
    - Write to log with line-buffering
  * deny:
    - Ignore duplicated base64 dependency for now
    - Remove duplicated windows dependencies
    - Update
  * fmp4mux:
    - Only push fragment_offset if write_mfra is true
    - Remove obsolete comment
  * gtk4:
    - Add support for GL on macOS
    - Don't error out when the main context channel does not exist
      anymore when rendering
    - Don't try to use GL mapped video frames as raw RGB memory
    - Flush frames from the paintable when shutting down the sink
    - Handle more GL context creation failures gracefully
    - Propagate the GL display to the remainder of the pipeline
    - Reduce number of unwraps during GL context creation and query
      handling
    - Release GStreamer GL context and display when going back to
      NULL state
    - Remove 'gst' from gtksink debug category name
    - Remove 'gst' prefix from another debug category
    - Rename a variable to make more sense
    - Reset app context and display if GL context creation fails
    - Update dependencies to releases
    - Use `glib::ThreadGuard` instead of the fragile crate
    - Use GL implicitly without the gst_gl feature on macOS
  * meson:
    - Add an option to build examples
    - Add options for all plugins
    - Disable webp plugin on Windows and macOS
    - Do not serialize env, use env: kwarg
    - Enable gstreamer-gl-1.0 features in gtk4 plugin
    - Fix pkgconfig detection when specified in machine file
    - Handle windows path separator correctly
    - Only enable cargo features when options are enabled
    - Require gstreamer-gl-1.0 for gtkpaintablesink
    - Require tomllib / tomli python modules explicitly
  * rav1e: Enable threading support
  * Revert "Revert "rav1e: Update to rav1e 0.6""
  * rtpav1depay: Implement srcpad set_caps
  * textahead: fix previous buffers
  * Update Cargo.lock
  * video/gtk4: Fix typo in info logs
  * webrtcsink: fix panic on pre-bwe request error
- Pass sodium=enabled instead of sodium=system to meson following
  upstream changes.

-------------------------------------------------------------------
Fri Dec 23 17:42:20 UTC 2022 - bjorn.lie@gmail.com

- Update to version 0.9.3+git20221216.b701003:
  * Add a WebRTC WHEP source element
  * Add livesync plugin
  * audiornnoise:
    - Add debug output for voice activity to help you choose a
      threshold
    - Add voice detection threshold
    - Use correct value range for the samples
  * aws:
    - s3sink: Treat stopping without EOS as an error for multipart
      upload
    - Update to env_logger 0.10 for the tests
  * ci: Disable gst-build job for now
  * dav1ddec: Lower rank to primary
  * deny:
    - Remove another dependency that is not duplicated anymore
    - Remove dependencies that are not duplicated anymore
    - Update
  * Fix various new clippy warnings
  * fmp4mux:
    - Crank clock for the first fragment in more tests
    - For video with N/1001 framerates use N as timescale
    - Handle EOS correctly if it happens before a fragment start
      time was determined
    - Re-work buffer dequeueing and calculations of timestamps
    - Skip gap buffers earlier to consider them for the sample
      durations and fragment start durations
  * gif: Update to gif 0.12
  * gst-plugin-mp4: Add new MP4 plugin with a non-fragmented MP4
    muxer
  * gtk4:
    - Deactivate application GL context again after `fill_info()`
    - Deactivate the context if we fail to fill_info
    - example: Use a bin with a `videoconvert` in the non-GL case
    - Make GL support fully optional
    - Only require GTK 4.6 if GL support is enabled
  * livesync:
    - Add missing version to the gst-plugin-gtk4 /
      gst-plugin-version-helper dependencies
    - Fix version
    - Use release versions of the GLib/GStreamer bindings
  * meson: Fix build of static plugins
  * mp4:
    - Add ONVIF non-fragmented MP4 muxer
    - Add version to gst-plugin-version-helper dependency
    - Remove unneeded cast in tests
    - Update to url 2
  * mp4mux:
    - Adjust durations and possibly stream start time on
      encountering a gap buffer
    - Don't write empty chunks at the end if the last buffer of a
      stream started a new chunk and happened to be a from a gap
      event
    - Don't write gap edit lists if their duration would be zero
    - Factor out running time to UTC time calculation into a
      function
    - Fix edit list shift for streams with initial DTS smaller
      earliest PTS but initial DTS positive
    - For video with N/1001 framerates use N as timescale
    - Remove unnecessary error case of negative PTS when doing the
      ONVIF UTC time calculations
    - Skip gap buffers instead of writing empty samples
  * mux/{mp4, fmp4}: Hard depend on feature v1_18
  * ndisrc:
    - Use actual number of channels in positions_from_mask
    - Use default channel mask for audio output
  * net/ndi: fix build with --no-default-features
  * net: Update to async-tungstenite 0.19
  * Provide explicit type to `Iterator::sum()` calls to avoid
    ambiguity
  * spotify: fix "start a runtime from within a runtime" with
    static link
  * textahead: add settings to display previous buffers
  * textwrap: Don't panic on empty buffers
  * threadshare: Update to concurrent-queue 2
  * tttocea608: Don't fail if a gap event contains no duration
  * Update Cargo.lock
  * video/gtk4:
    - Implement support for GLTextures when possible.
    - Rename Object types and struct to something simpler
    - Restrict visibility of struct related to the Frame
  * webrtchttp:
    - Do not block webrtcbin signal handlers for sending candidates
    - Do not import element_imp_error
    - Don't use let-else for now
    - Drop unused dependencies
    - Factor out the common bits for WHIP and WHEP
    - Fix documentation JSON
    - Fix formatting
    - Fix missing import for docs build
    - Implement timeout for waiting on futures
    - Remove unnecessary clippy warning override
    - Use a proper Rust type name for ICE transport policy
    - Use tokio runtime for spawning thread used for candidate
      offer
    - whipsink:
      . Add candidates when sending the offer
      . Construct TURN URL correctly
      . Miscellaneous clean up
  * webrtc/README: update command to run the signalling server
  * webrtcsink: Support nvv4l2vp9enc
  * whipsink: Handle offer creation errors more gracefully

-------------------------------------------------------------------
Thu Nov 17 16:19:32 UTC 2022 - alarrosa@suse.com

- Update to version 0.9+git20221113.274e57a:
  * Update Cargo.lock
  * Update versions to 0.9.1
  * closedcaption: Update for deprecated chrono functions
  * version-helper: Update for deprecated chrono functions
  * Update Cargo.lock
  * webrtc: README: fix couple of links
  * webrtcsink: improve debug
  * ci: add trigger job and only run documentation job post-merge
  * ci: add integration stage and move documentation job to that
  * ts/udpsink: handle items in the PadSinkHandler
  * ts: introduce ts-audiotestsrc
  * ts/standalone: add new Sinks
  * ts/standalone: move current sink under task_sink
  * deny: Update
  * Add missing `doc` features to WebRTC plugins
  * fmp4mux: Make media/trak timescales configurable
  * ci: Update to cargo-c 0.9.14
  * meson: optionalize pango dependency used by net/onvif
  * ndi: provide Unix fallback after 3fe9e4a207f8
  * fmp4mux: Don't allow VP9 for CMAF
  * fmp4mux: Add initial Opus support
  * docs: Remove some stale entries of renamed elements
  * aws: Skip s3 test on Windows until we figure out why it times
    out
  * Fix various new clippy warnings
  * fmp4mux: For VP9, write resolution into the tkhd and include a
    stss box to signal that not all frames are sync samples
  * webrtc: Update to human_bytes 0.4
  * aws: Update to aws 0.21/0.51
  * fmp4mux: Remove unused uuid dependency
  * Update Cargo.lock
  * fmp4mux: Clip negative PTS to zero/last PTS instead of erroring
    out
  * fmp4mux: Send force-keyunit events for now if the ideal
    position has already passed
  * fmp4mux: Add debug log when writing the mfra box
  * fmp4mux: Reset timing infos to None if a stream only contained
    gap events for a whole fragment
  * fmp4mux: If a stream is longer than the main stream at EOS,
    simply include all of its buffers in the last fragment
    nonetheless
  * whipsink: Add object to debug logs
  * fmp4mux: don't require dts for predictive-only formats like vp9
  * aws: fix title in README
  * deny: Update
  * fmp4: add support for muxing VP9 streams in cmaf, dash and iso
    fmp4
  * Add Cargo.lock
  * Update to release versions of gtk-rs and gstreamer-rs
  * Update versions to 0.9.0
  * Update to async-tungstenite 0.18
  * pngenc: Encode every frame individually
  * ts/pad: use `gst::Pad` in handlers trait functions...
  * ts/pad: don't pass self as ref in remaining handler traits
    functions
  * textwrap: Update to textwrap 0.16
  * Move from `imp.instance()` to `imp.obj()`
  * Remove `&` for `obj` in log macros
  * Update docs
  * Add all missing plugins/elements to the README.md
  * Fix GObject type names, GStreamer debug category names and
    element factory names
  * Add new mux subdirectory for container formats
  * rtp: Move GCC bandwidth estimation element from webrtc to rtp
    plugin
  * Make GStreamer plugin/crate/library/directory names and
    descriptions consistent
  * Rename rtpav1 plugin to just rtp
  * videocompare: Update README with reference
  * Sort members in Cargo.toml and meson.build alphabetically and
    the same in both files
  * Various minor cleanups
  * meson: Fix warning
  * videocompare: Fix warning
  * Take advantage of `Into<Option<_>>` args
  * onvifmetadatacombiner: On timeout don't wait for metadata to
    arrive anymore but output the current video frame
  * onvifmetadatacombiner: Add a lot of trace debug output
  * spotifyaudiosrc: convert to PushSrc

-------------------------------------------------------------------
Fri Oct 21 06:18:44 UTC 2022 - bjorn.lie@gmail.com

- Update to version 0.9.alpha.1+git20221020.5c89c3d:
  * meson: add plugins list to summary
  * fallbacksrc: Don't configure conversion elements for normal
    stream
  * webrtc:
    - Rename and add to meson build the signalling server
    - Enhance documentation
    - Minor cleanup
    - Rename signaller and protocol crates
    - Update and unify rust-version and edition
    - Uniformise GType names
    - Port to new ElementBuilder API
- Add ppc ppc64 ppc64le s390 ExcludeArch: Current versions of
  gstreamer-plugins-rs depends on rs-ring, and rs-ring does not yet
  support building on these targets.

-------------------------------------------------------------------
Mon Oct 10 15:17:09 UTC 2022 - bjorn.lie@gmail.com

- Update to version 0.9.alpha.1+git20221010.b1b7070:
  * Change *Impl trait methods to only take &self and not
    Self::Type in addition
  * fallbacksrc:
    - Always restart the fallback stream on EOS and make sure to
      EOS all streams if the main stream is EOS
    - Retry fallback stream on errors too
  * jsontovtt:
    - Add timeout property
    - Print object information to debug message
  * Update for glib::Object::new() API changes
  * update-version.sh: Also update version in meson.build
  * Use `GFV::none_for_format` where applicable

-------------------------------------------------------------------
Thu Oct 06 11:58:03 UTC 2022 - bjorn.lie@gmail.com

- Update to version 0.9.alpha.1+git20221005.0b13bfe:
  * Add missing Since markers to new plugins
  * Add RTP de/payloader elements for AV1
  * Allow "unused_doc_comments" as we use hotdoc and not rustdoc
  * awstranscriber:
    - fix set_property for language-code
    - only set vocabulary filter when vocabulary is set
  * aws: Update to aws 0.48/0.18
  * build: Update versions to be 0.9.0-alpha.1
  * cargo:
    - Sort members and default-members lists
    - Update default-members list
  * cea608tojson: Clip column number if it exceeds allowed value
  * csound: Fix score-offset getter
  * dav1ddec: Require dav1d 1.0.0 in meson
  * dav1d: Update to dav1d 0.9
  * doc: Mark request::user-agent as doc show default
  * docs: Remove cruft
  * examples: Update to clap 4
  * fallbacksrc:
    - Always restart the fallback stream on EOS and make sure to
      EOS all streams if the main stream is EOS
    - Implement support for fallback streams
    - Retry fallback stream on errors too
  * fallbackswitch:
    - Fix lock order problem between state and stream lock
    - Flush and deactivate pads before releasing them
    - Make sure to flush/reset pads during pad (de)activation
    - Port the example to GTK 4
  * Fixes for removal of SpecificFormattedValues ops on ref
  * Fix missing pkgconfig requires
  * fmp4mux:
    - Drop GAP buffers before doing ONVIF UTC time re-timestamping
    - Drop gap buffers before further processing
    - Implement a better strategy for splitting fragments and
      deciding which buffers go into which fragment
    - Split huge drain function into separate functions
  * Generate plugins documentation using hotdoc
  * jitterbuffer: fix typo when calculating max_misorder_time
  * jsontovtt: Don't push zero-duration cue data
  * meson:
    - Blacklist csound and threadshare plugins for gst-full
    - Define gst_plugins with list of dependencies
    - Fix deprecation warning
    - Fix directory/plugin name mapping for new webrtchttp plugin
    - Fix gstwebrtc/gstsdp subproject usage
    - Fix usage of python3 variable which was renamed recently
    - Import python module only once
    - Use workspace Cargo.toml to find crates path
  * net/onvif: update with new `gst::Signed` features
  * onvif:
    - Fix for `gst::meta::CustomMeta::register()` API change
    - Rename onvif(de)pay to rtponvifmetadata(de)pay and include
      the metadata specifier in the other element names too
  * onvifmetadatacombiner:
    - Do not classify as Muxer
    - Drop gap metadata buffers
  * onvifmetadataparse:
    - Drop initial buffers if their UTC time would be negative
    - Drop initial buffers until an UTC/running time mapping can be
      established
    - Handle negative running times in debug output
    - Pass through other XML as is with the UTC times based on the
      buffer PTSs
    - Push buffers from a separate source pad task to guarantee
      latency and generally improve correctness
    - Refactor clock/condvar waiting
    - Schedule EOS events after the last currently queued up frame
    - Simplify some code
    - Start source pad task on StreamStart if needed
  * pngenc: Allow using deprecated compression levels
  * rav1e: Pin `v_frame` dependency to version 0.2.5 for now
  * rtpav1depay: Don't unnecessary map RTP payload a second time
  * rtpav1pay: Don't push buffers downstream while holding mutexes
  * rtpav1:
    - Remove some unneeded lifetime annotations
    - Reset state on FlushStop/Eos in all conditions and reset all
      of the state
    - Specify version helper dependency by path
    - Use GStreamer types by namespace instead of importing dozens
      of types directly into the scope
  * s3sink: Dont set call_timeout,call_attempt_timeout is enough
    with retry.
  * s3sink, s3src: Max 1 (re)try when retry-duration <
    request_timeout.
  * text/json:
    - hard depend on ser_de feature of gst crate
    - use renamed gst feature 'serde'
  * threadshare: disable tests that can't work on windows
  * togglerecord: Port example to GTK 4
  * tracers:
    - Fix documentation comment using gtk-doc style
    - queue-levels: Update for `gst::TracerImpl` API changes
  * ts: add feature to add counters for performance evaluation
  * ts/executor: clear the reactor instead of closing it...
  * ts-jitterbuffer:
    - Declare `request-pt-map` signal
    - extra robustness for Windows CI
    - Fix latency type when getting property
  * ts/scheduler:
    - fix shutdown
    - improve tasks / io & timers polling  balance
  * ts/standalone: multiple improvements
  * ts/Task: don't drain sub tasks after state transition and
    iteration
  * ts/timers: multiple improvements
  * Update for GLib ParamSpec builder API changes
  * Update minimum supported Rust version to 1.63
  * update-version.sh: Also update version in meson.build
  * uriplaylistbin: Port example from structopt to clap
  * video/rspng: add missing doc feature gate
  * whipsink: A GstBin implementation for WHIP
- Add python3-tomli and pkgconfig(gstreamer-webrtc-1.0)
  BuildRequires: New dependencies.
- Pass default-library=shared and doc=disabled to meson, ensure we
  build the shared lib as default and disable build of docs.

-------------------------------------------------------------------
Mon Sep 12 21:23:10 UTC 2022 - Bjørn Lie <bjorn.lie@gmail.com>

- Update constraints for i586, bump to 22 G here too.

-------------------------------------------------------------------
Mon Aug 29 23:16:32 UTC 2022 - bjorn.lie@gmail.com

- Update to version 0.8.4+git20220824.052092cd:
  * Add RaptorQ RTP FEC plugins
  * audioloudnorm: Drain on segment event
  * audio: Use gst_audio::AudioCapsBuilder in some plugins
  * audio, video: Use AudioCapsBuilder::new_interleaved where
    applicable
  * aws: Document the s3hlssink element in README
  * aws: s3sink: Add a deprecation warning for retry duration
    properties
  * aws: s3sink,s3src,transcriber: Add property to set temporary
    credentials
  * aws_transcriber: expose filtering related properties
  * aws_transcriber: Fix regression with credentials mechanism
  * aws: Update to aws 0.17/0.47
  * ci: Update image version
  * ci: Update to cargo-c 0.9.11
  * deny: Update
  * fallbackswitch: fix gap processing regression
  * fallbackswitch: Remove unused libc dependency/feature
  * Fix a couple of new 1.62 clippy warnings
  * Fix build after glib SignalBuilder::param_types() API change
  * Fix/silence a couple new clippy warnings
  * fmp4mux: Add debug output for each fragment's start PTS
  * fmp4mux: Consider invalid running times as zero and before
    anything else
  * fmp4mux: Dequeue as many buffers as are available in each
    aggregate call
  * fmp4mux: Dequeue the earliest buffer from any pad first instead
    of dequeueing up to a whole fragment from the same pad
  * fmp4mux: Ensure that DTS (or PTS for intra-only streams) are
    monotonically increasing
  * fmp4mux: Fix draining if there are no GOPs for a stream
  * fmp4mux: Fix some clippy warnings
  * fmp4mux: Fix usage of first_sample_flags/default_sample_flags
  * fmp4mux: Handle PTS<segment.start when requesting keyframes
  * fmp4mux: Refactor timestamp handling for writing out data
  * fmp4mux: Remove obsolete `#[allow(clippy::too_many_arguments)]`
  * fmp4mux: Require parsed ONVIF timed metadata
  * fmp4mux: Use UTC times from reference timestamp meta in ONVIF
    mode
  * fmp4mux: Write header as late as possible
  * fmp4mux: Write ONVIF Export File Format CorrectStartTime box
    for ONVIF variant
  * fmp4mux: Write `tref` box for ONVIF timed metadata tracks to
    reference the first video track
  * fmp4: Update to m3u8-rs 5
  * generic/fmp4: update Signed return type
  * generic/fmp4: use opt_ops
  * hlssink3: convert playlist type to an enum
  * hlssink3: Dont reset end_list after stop is called.
  * hlssink3: Put EXT-X-ENDLIST for vod playlist-type.
  * hlssink3: Update to m3u8-rs 5
  * Migrate s3src and s3sink to use AWS SDK
  * Migrate transcriber to aws sdk
  * net/aws: Add support for S3 HLS sink
  * net/aws: Add support for specifying endpoint
  * net/aws/aws_transcriber: Fix clippy warning
  * net/aws: Clean up pending rusoto references
  * net/rusoto: Drop rusoto crates
  * net/rusoto: Rename to aws
  * onvif: Add onvifmetadataparse element
  * onvifaggregator: Add support for UNIX reference timestamp
    metadata
  * onvifaggregator: refactor, expect parsed metadata
  * onvif: Disable default features for the chrono dependency
  * onvifmetadataparse: Only define the namespace prefix once for
    the top-level element
  * onvifmetadataparse: use NTP epoch everywhere instead of mixing
    UNIX/NTP epochs
  * onvifmetadataparse: Use NTP reference timestamp meta
  * onvifmetadata: removing encoding field
  * onvifoverlay: render polygons when present
  * onvif: Update to minidom 0.15
  * plugins: Simplify code using ParamSpecBuilder
  * raptorq: Derive `Eq` for some more structs
  * README.md: Add various new plugins
  * README: mention cargo update to resolve dep issues after git
    updates
  * Remove unnecessary `unsafe` blocks for `Buffer::as_ptr()`
  * Rename rusoto to aws
  * Revert "fmp4mux: Dequeue as many buffers as are available in
    each aggregate call"
  * roundedcorners: Ensure alpha_mem is mutable when updating
    radius
  * roundedcorners: Logging improvement
  * Simplify Formatted value handling
  * sodium: Update to no-deprecated clap 3.2 API
  * textahead: generate a buffer with ahead text at segment start
  * threadshare: Fix some new clippy beta warnings
  * tracers: Add new tracer for logging the lateness of each buffer
    when it leaves a pad
  * tracers: Add queue levels tracer and Python script for plotting
  * tracers: buffer_lateness: log when file is being written
  * tracers: buffer_lateness.py: cycle colors
  * tracers: Enable PipelineSnapshot only for unix target
  * tracers: queue-levels: Add support for multiqueue and queue2
  * tracers: queue-levels: Fix analysis script if only a single
    plot should be created
  * tracers: queue_levels: log when file is being written
  * tracers: queue-levels: Output bytes/buffers/time graphs in
    separate plots
  * tracers: queue_levels.py: cycle colors
  * transcriberbin: remove print statement
  * ts: add test pipeline::socket_play_null_play
  * ts/appsrc: reduce sync primitives in async hot path
  * ts/async_wrapper: remove fd from reactor before dropping its
    handle
  * ts/examples: introduce a standalone pipeline test
  * ts: migrate elements to try_next / handle_item
  * ts: Queue & Proxy: minor cleanups
  * ts/runtime: slight optimizations for sub tasks related
    operations
  * ts/scheduler: rename awake / wake_up as unpark
  * ts/Task: return a future for state transitions
  * ts/Task: spawn StateMachine on ts Context
  * ts/Task: split iterate into try_next and handle_item
  * ts/Task: wake up after the triggering event is pushed
  * ts/tcpclientsrc: reduce sync primitives in async hot path
  * ts/tests/pad: minor ckeanups
  * ts/udpsink: fix default clients not leading to socket
    configuration
  * ts/udpsink: move sync on buffer to try_next
  * ts/udpsink: reduce sync primitives in async hot path
  * ts-udpsrc: align default port with C counterpart
  * ts/udpsrc: reduce sync primitives in async hot path
  * ts: update elements for new TransitionStatus
  * Update per glib::SignalBuilder changes
  * video: Use gst_video::VideoCapsBuilder in some plugins
- Add define _lto_cflags {nil}, disable LTO for now. The port to
  aws-sdk from rusoto causes the build to fail with LTO.
- Bump minimum hdd in _costraints to 22G.
- Modernize _service, use obs_scm and add cargo_audit.

-------------------------------------------------------------------
Fri Jun 17 10:01:13 UTC 2022 - bjorn.lie@gmail.com

- Move the service to use the main git branch, explicit commit.
- Update to version0.8.4+git20220607.b1b3930e:
  * add snapshotting tracer
  * Add SPDX-License-Identifier to all file headers
  * audiofx:
    - Update nnoiseless dependency to 0.4
    - Update to nnnoiseless 0.5
  * awstranscribe - increase presisigned url duration to 5 mins
    from 60s
  * Bump hrtf to version 0.8
  * cargo_wrapper.py: added python3 version check for right usage
    of shutil.move(..)
  * cdg: update image and cdg_renderer
  * cea608overlay: handle CLEAR status
  * cea608tott: Don't zero-pad SRT indices but zero-pad hours to at
    least two digits
  * Change default branch from master to main
  * ci:
    - cargo test --all-features too...
    - Fix syntax for coverage reports to the new format
    - Generate coverage report also for crates with external
      dependencies
    - Rebuild image and move coverage job to the stable image
    - Remove the david checkot after install
    - Run tests with RUST_BACKTRACE
  * closedcaption: Update to uuid 1.0
  * colordetect: Update to color-thief release
  * Correctly check for the `DISCONT` buffer flag to be set
  * dav1ddec:
    - Add 8/16 bit grayscale support
    - Bump dependency for dav1d 1.0.0
    - Clean up state tracking a bit
    - Deal with the possibilty of 0/1 fps in latency math
    - Don't consider decoding errors as fatal
    - Expose a couple of decoder settings as properties
    - Fix compilation after some API changes
    - Move decoder init from start() to set_format()
    - Move state to Mutex from Arc
    - Pass element instance to debug logs
    - Release input frames that immediately caused a decoding error
    - Report latency based on frame delay
    - Require correct alignment and stream format when running with
      GStreamer 1.20
    - Switch to dav1d 0.7
    - Update for fixed dav1d-rs API
    - Use `AtomicRefCell` instead of `Mutex` for the state
    - Use sink_pad() convenience accessor
    - Write src_query() in match syntax for easier extensibility
  * deny:
    - Ignore duplicated wasi dependency
    - Remove duplicated `nom` dependency and add `env_logger`
    - Remove now unneeded miniz_oxide override
    - Remove num-rational override
    - Update for removed duplicated dependencies
    - Update for tokio-util
  * fallbacksrc:
    - Add fallback-{audio,video}-caps properties
    - Changing the URI of the video fallback is supported in NULL
      state
    - Connect to `notify::active-pad` after requesting pads
    - Disconnect signals on ReadyToNull
    - Don't forward manual flush events to downstream
    - Don't panic when shutting down the source and there are
      source pad blocks but no actual source pads
    - Flush source before restarting on errors
    - Remove imagefreeze if it becomes unneeded
    - Request the main pad first from fallbackswitch
    - Reset state in fallbacksrc custom source also if changing the
      state to READY before failed
    - Unflush downstream pads of the source after shutting down
      everything
  * fallbackswitch:
    - Add missing requires_private
    - add support for buffers without pts
    - Clip buffers against the segment
    - Don't configure a framerate in the test
    - Explictly set priority of pads in the test
    - export GEnum used in properties
    - factor out handle_main_timed_item()
    - Fix clipping of buffers against the output running time
    - Fix racy manual switching test
    - Forward custom downstream events from active sinkpad
    - Improve debug output of clock times and simplify some code
    - Improve some debug outputs
    - Log affected pad when scheduling buffer waiting for it
    - Minor cleanup in get_sync_time
    - Move active_sinkpad out of State into its own Mutex
    - Notify active-pad without state lock held
    - Only drop raw audio/video buffers if they're trailing
    - Only notify active-pad property on state changes if it
      actually changed
    - Only update the output running time if it's increasing
    - properly handle GAP events
    - Recheck active_sinkpad after schedule_timeout
    - Remove a redundant pad state unlock/lock
    - Rename debug category from fallback-switch to fallbackswitch
    - Replace with priorityswitch
    - Reset timeout_clock_id on timeout
    - Set end running time as current running time once a buffer
      has passed
    - Use cancel_timeout in schedule_timeout
  * fmp4mux:
    - adding headers when data resumes after EOS
    - Add ONVIF variant with support for additional codecs
    - Add support for multiple input streams
    - Add support for ONVIF timed XML metadata
    - Add support for writing out multiple tracks in the
      serialization code
    - Add test for muxing of multiple streams
    - Add to default workspace members
    - Check for force-keyunit events on both pads in the
      multistream test
    - HLS live example
    - HLS VOD example
    - Implement handling of GAP events
    - Implement interleaving based on start timestamps instead of
      accumulated durations
    - In live pipelines use the current fragment end time as
      timeout
    - Port to aggregator as base class as preparation for
      supporting multiple streams
    - Use saturing_sub() in more places
    - Use saturing subtraction to calculate sample durations
    - Write sample flags in `tfhd` if there's only a single sample
  * generic/threadshare: fix for nightly build
  * .gitlab-ci.yml: Fix deprecated -Zinstrument-coverage switch
  * gtk4:
    - Attach main context receiver from the main context's thread
    - Implement Default for PaintableSink
  * hlssink3:
    - Fix version
    - `PadTemplate::name_template()` returns a `&str` now instead
      of `Option<String>`
  * hrtfrender: Switch back to hrtf 0.7
  * m3u8-rs: Depend on version exactly 3.0.0
  * mccparse/sccparse: Don't log gst::FlowError::Flushing or Eos as
    error to the debug logs
  * meson:
    - Cleanup our meson integration
    - Fix building when git isn't available
  * net/onvif: implement ONVIF metadata processing elements
  * onvifaggregator:
    - always push current media buffer on timeout
    - implement proper EOS support
    - refactor to support duration-less media buffers
    - Update for minor `PadTemplate` API changes
  * rav1enc:
    - Use `AtomicRefCell` instead of `Mutex` for the state
    - Don't handle `NeedMoreData` as "soft" error
    - Expose various new settings
    - Include stream-format and alignment in the caps
    - Put container sequence header into the caps
    - Set mastering display info, content light level and HDR
      related colorimetry
    - Simplify code
    - Support 8 bit grayscale input
    - Switch from speed preset 5 to 6 as default
  * README: Mention the colordetect element
  * Re-license LGPL-2.1 plugins to MPL-2
  * Remove now unnecessary `Send+Sync` impls for element/etc
    subclasses
  * Rename `self_` variables to `imp` for consistency
  * Replace `Foo::from_instance(foo)` with `foo.imp()`
  * reqwest: Don't unnecessarily borrow dereferenced values
    explicitly
  * Revert
    - "fallbackswitch: Forward custom downstream events from active
      sinkpad"
    - "Revert "uriplaylistbin: disable test deadlocking""
    - "uriplaylistbin: disable test deadlocking"
  * rtponvifdepay: Set caps on the source pad
  * rusoto:
    - Add missing license file
    - Export AwsTranscriberResultStability enum
    - s3sink: Expose property to control all timeout/retry
      durations
    - s3sink: Implement timeout/retry for part uploads
    - s3sink: Make remaining requests bounded in time
    - s3sink, s3src: Retry on server errors
    - s3src: Implement timeout and retries
    - Update async-tungstenite dependency to 0.17
    - Update to crc 3 and rusoto 0.48
  * rustfmt.toml: Add file
  * s3src: Consolidate stream reading into get object retries
  * Simplify some code around event/query views
  * spotifyaudiosrc: Update to librespot 0.4
  * textahead: `PadTemplate::caps()` returns a caps reference now
  * textwrap: Update for textwrap 0.15 API changes
  * threadshare:
    - fix build on Windows
    - Remove glib::SendUnique usage
    - Use `into_glib_ptr()` instead of `into_ptr()`
  * transcriberbin:
    - Add caption-source property
    - Don't notify signal inside lock
    - Fix deadlock
    - make audioqueue leaky
    - Protect runtime "passthrough=false" change
  * ts/examples: add rtp mode with jitter-buffer & trace stop
    duration
  * ts/jitterbuffer:
    - don't wake up immediately...
    - set jbuf delay when instantiating it
  * ts: log max throttling when creating Context
  * ts/rt/Task:
    - awake the iteration loop when it needs to be aborted
    - use light weight executor blocking on ack or join handle
  * tttocea608: expose roll-up timeout property
  * tutorial/sinesrc: Use pushsrc as direct superclass in the
    glib::wrapper macro too
  * Update for event/message/query view API changes
  * Update license text in the README.md
  * Update minimum supported GStreamer version to 1.14
  * Update minimum supported Rust version to 1.57
  * Update README.md with all the new plugins/elements
  * Update to gst::_log_macro_
  * Update to m3u8-rs 4.0
  * Update to parking_lot 0.12 and hrtf 0.8
  * Update versions to 0.9.0
  * uridecodebin: stop using crossbeam_channel
  * uriplaylistbin:
    - add Status::ShuttingDown
    - break reference cycle
    - disable more tests
    - disable more tests
    - disable test deadlocking
    - display invalid state when panicing
    - fix deadlock when shutting down
    - fix number of streaming items
    - fix race when handling topology change
    - handle waiting items no longer being set
    - implement Debug on State
    - remove pad probe when shutting down
    - remove useless uridecodebin clone
    - replace errored with Status enum
    - skip missing_http test
    - Update to more-asserts 0.3
  * Use SPDX license format in Cargo.toml
  * videofx: Add colordetect video filter

-------------------------------------------------------------------
Thu Jun 09 15:47:40 UTC 2022 - bjorn.lie@gmail.com

- Update to version 0.8.4:
  * audiofx: Update nnoiseless dependency to 0.4
  * awstranscribe: increase presisigned url duration to 5 mins from
    60s
  * cea608tott: Don't zero-pad SRT indices but zero-pad hours to at
    least two digits
  * ci: cargo test --all-features too...
  * ci: run tests with RUST_BACKTRACE
  * closedcaption: Update to uuid 1.0
  * Correctly check for the `DISCONT` buffer flag to be set
  * deny: Ignore duplicated wasi dependency
  * fallbacksrc:
    - Changing the URI of the video fallback is supported in NULL
      state
    - Disconnect signals on ReadyToNull
    - Flush source before restarting on errors
  * fallbackswitch:
    - Add missing requires_private
    - add support for buffers without pts
    - export GEnum used in properties
    - factor out handle_main_timed_item()
    - properly handle GAP events
  * generic/threadshare: fix for nightly build
  * meson:
    - Cleanup our meson integration
    - Fix building when git isn't available
  * rusoto: s3sink:
    - Expose property to control all timeout/retry durations
    - Implement timeout/retry for part uploads
    - Make remaining requests bounded in time
    - s3src: Retry on server errors
  * rusoto: s3src: Implement timeout and retries
  * rusoto:
    - Update async-tungstenite dependency to 0.17
    - Update to crc 3 and rusoto 0.48
  * rustfmt.toml: Add file
  * s3src: Consolidate stream reading into get object retries
  * textwrap: Update for textwrap 0.15 API changes
  * transcriberbin:
    - Add caption-source property
    - Don't notify signal inside lock
    - Fix deadlock
    - make audioqueue leaky
     - Protect runtime "passthrough=false" change
  * ts/examples: add rtp mode with jitter-buffer & trace stop
    duration
  * ts/jitterbuffer: don't wake up immediately...
  * ts: log max throttling when creating Context
  * ts/rt/Task:
    - awake the iteration loop when it needs to be aborted
    - use light weight executor blocking on ack or join handle
  * Update Cargo.lock
  * Update license text in the README.md
  * Update to m3u8-rs 4.0
  * uridecodebin: stop using crossbeam_channel
  * uriplaylistbin:
    - add Status::ShuttingDown
    - break reference cycle
    - disable more tests
    - disable test deadlocking
    - display invalid state when panicing
    - fix deadlock when shutting down
    - fix number of streaming items
    - fix race when handling topology change
    - handle waiting items no longer being set
    - implement Debug on State
    - remove pad probe when shutting down
    - remove useless uridecodebin clone
    - replace errored with Status enum
    - skip missing_http test
  * Use SPDX license format in Cargo.toml

-------------------------------------------------------------------
Wed Mar 23 08:59:08 UTC 2022 - Andreas Schwab <schwab@suse.de>

- Update constraints for riscv64

-------------------------------------------------------------------
Mon Feb 28 12:39:44 UTC 2022 - bjorn.lie@gmail.com

- Update to version 0.8.2:
  * Update Cargo.lock
  * ci: Use correct gstreamer-rs images template
  * deny: Remove num-rational override
  * dav1ddec:
    - Use `AtomicRefCell` instead of `Mutex` for the state
    - Fix compilation after some API changes
    - Release input frames that immediately caused a decoding error

-------------------------------------------------------------------
Fri Feb 04 20:27:29 UTC 2022 - bjorn.lie@gmail.com

- Update to version 0.8.1:
  * Update Cargo.lock
  * Update versions to 0.8.1
  * cdg: update image and cdg_renderer
  * gtk4: Attach main context receiver from the main context's
    thread
  * dav1ddec: Add 8/16 bit grayscale support
  * rav1enc: Support 8 bit grayscale input
  * dav1ddec: Require correct alignment and stream format when
    running with GStreamer 1.20
  * rav1enc: Include stream-format and alignment in the caps
  * dav1ddec: Clean up state tracking a bit
- Add automatic .changes generation to service, as upstream seems
  to not want to make release notes or changelogs.

-------------------------------------------------------------------
Wed Jan 19 14:17:20 UTC 2022 - Antonio Larrosa <alarrosa@suse.com>

- Add a BuildRequires: pkgconfig(libwebp) to fix loading
  libgstrswebp.so which was failing with an `undefined symbol:
  WebPAnimDecoderDelete` error.

-------------------------------------------------------------------
Tue Jan 18 09:04:54 UTC 2022 - Antonio Larrosa <alarrosa@suse.com>

- Increase the disk constraint since i586 builds take ~15.6 GB,
  s390x over 22 GB and other archs ~18.8 GB.

-------------------------------------------------------------------
Mon Jan 17 16:22:51 UTC 2022 - Antonio Larrosa <alarrosa@suse.com>

- Update to version 0.8.0:
  * No changelog provided by upstream

-------------------------------------------------------------------
Wed Nov 10 18:52:14 UTC 2021 - Bjørn Lie <bjorn.lie@gmail.com>

- Disable csound plugin for now, mask all macros, BuildRequires and
  set option passed to meson to disabled (was auto), wait for
  upstream to fix the issues identified.

-------------------------------------------------------------------
Tue Nov  2 19:51:56 UTC 2021 - Bjørn Lie <bjorn.lie@gmail.com>

- Filter out pkgconfig(csound) Requires, add manual csound-devel
  BuildRequires to devel package. csound-devel does not provide a
  .pc file so the autogenerated Requires on pkconfig(csound) is
  wrong.

-------------------------------------------------------------------
Tue Nov  2 11:00:09 UTC 2021 - Bjørn Lie <bjorn.lie@gmail.com>

- Drop baselibs.conf, this is a new package, lets not build 32bit
  unless we have to.

-------------------------------------------------------------------
Sat Oct 16 10:54:15 UTC 2021 - Bjørn Lie <bjorn.lie@gmail.com>

- No longer disabled LTO, drop macro.

-------------------------------------------------------------------
Sat Sep  4 23:21:39 UTC 2021 - Bjørn Lie <bjorn.lie@gmail.com>

- Update to version 0.7.2:
- Switch service to using an explicit released tag.
- Drop 0001-Fix-cast-to-f64-so-it-builds-in-i586.patch: Fixed
  upstream.

-------------------------------------------------------------------
Mon Apr 19 15:00:36 UTC 2021 - Antonio Larrosa <alarrosa@suse.com>

- Update to 0.6.0+git20210412.c3fb55f
- Add patch to fix build in the i586 architecture
  (Submitted in glfo#gstreamer/gst-plugins-rs#502):
  * 0001-Fix-cast-to-f64-so-it-builds-in-i586.patch

-------------------------------------------------------------------
Thu Dec 24 13:28:20 UTC 2020 - Bjørn Lie <bjorn.lie@gmail.com>

- Enable build of dav1d plugin, do this via:
  + Disable LTO via macro.
  + Add clang and pkgconfig(dav1d) BuildRequires.
  + No longer pass dav1d=disabled to meson, nor remove dav1d from
    cargo.toml via sed call.
- Add pkgconfig(libsodium) BuildRequires and pass sodium=system to
  meson, do not use package internal version of sodium.
- Drop pkgconfig(gtk+-3.0) BuildRequires, not needed.
- Add pkgconfig(pango) BuildRequires: Mandatory, previously pulled
  in by pkgconfig(gtk+-3.0), and add optional nasm BuildRequires.
- Drop gcc-c++ BuildRequires, no longer needed, nor used.
- Replace llvm-devel with llvm BuildRequires, this is sufficent.
- Do general cleanup of spec, make package ready for submit to TW.
  Use normal meson macros.
- Add _constraints, ensure the build have enough harddisk space.

-------------------------------------------------------------------
Tue Dec  1 11:28:33 UTC 2020 - Antonio Larrosa <alarrosa@suse.com>

- Update to git version 0.6.0+git20201201.58786fa
- Use obs-service-cargo_vendor in the _service file and replace
  vendor-cargo-config with cargo_config
- Enable the build of sodium and threadshare plugins
- Remove special Cargo.lock source file which is not needed anymore

-------------------------------------------------------------------
Wed Oct 28 16:42:07 UTC 2020 - Antonio Larrosa <alarrosa@suse.com>

- Fix version, since the initial release wasn't 1.18.0 but 0.6.0
- Update to git version 0.6.0+git20201026.d16e7d1

-------------------------------------------------------------------
Sat Oct 24 12:59:22 UTC 2020 - Dominique Leuenberger <dimstar@opensuse.org>

- Use %_vpath_builddir instead of hardcoded 'build' directory name:
  meson allows for the path to be changed.

-------------------------------------------------------------------
Wed Sep 16 11:14:49 UTC 2020 - Antonio Larrosa <alarrosa@suse.com>

- Initial release of gstreamer-plugins-rs 1.18.0

Places

File gstreamer-plugins-rs.changes of Package gstreamer-plugins-rs (Revision 4a89dad99a3b854c3fc93ddca196a595)

Places