Sign Up
Log In
Log In
or
Sign Up
Places
All Projects
Status Monitor
Collapse sidebar
SUSE:SLE-12-SP1:GA
open-vm-tools.688
suspend_with_systemd.patch
Overview
Repositories
Revisions
Requests
Users
Attributes
Meta
File suspend_with_systemd.patch of Package open-vm-tools.688
Under VMware ESXi, guests are suspended through a "hard" suspend process. This process does not take into consideration the state of the network on the guest. Under VMware Workstation, Fusion and Player, a "soft" suspend process is used. This process first attempts to suspend the network within the guest using the /etc/vmware-tools/scripts/vmware/network script. In 9.4.0, the default network script is not systemd aware and therefore fails with the following messages: Tue Dec 23 10:07:04 CET 2014 : Executing '/etc/vmware-tools/suspend-vm-default' Tue Dec 23 10:07:04 CET 2014 : Executing '/etc/vmware-tools/scripts/vmware/network' Error org.freedesktop.DBus.Error.ServiceUnknown: The name org.freedesktop.NetworkManager was not provided by any .service files Error org.freedesktop.DBus.Error.ServiceUnknown: The name org.freedesktop.NetworkManager was not provided by any .service files Error org.freedesktop.DBus.Error.ServiceUnknown: The name org.freedesktop.NetworkManager was not provided by any .service files Dec 23 10:07:04 network: Cannot find system networking script. The following patch updates the network script to match the script provided with open-vm-tools 9.10.0. This includes support for systemd, and eliminates the DBus message noise. https://bugzilla.suse.com/show_bug.cgi?id=894652 Index: open-vm-tools-9.4.0-1280544/scripts/linux/network =================================================================== --- open-vm-tools-9.4.0-1280544.orig/scripts/linux/network +++ open-vm-tools-9.4.0-1280544/scripts/linux/network @@ -1,6 +1,6 @@ #!/bin/sh ########################################################## -# Copyright (C) 2001-2010 VMware, Inc. All rights reserved. +# Copyright (C) 2001-2015 VMware, Inc. All rights reserved. # # This program is free software; you can redistribute it and/or modify it # under the terms of the GNU Lesser General Public License as published @@ -21,9 +21,9 @@ # # network (Linux) # -# Using a combination of a system networking script, ifconfig, and ifup, -# attempt to release and renew DHCP leases upon receipt of suspend and resume -# events, respectively. +# Using a combination of a system networking script, ifconfig, ifup, ifdown +# and the ip command, attempt to release and renew DHCP leases upon receipt +# of suspend and resume events, respectively. # @@ -79,25 +79,233 @@ find_networking_script() { # -# run_network_script -- +# exec_networking_script -- # -# Finds out how to run the system's script used to control networking, and -# runs it with the given argument (which should be one of the usual SysV -# init script arguments). +# Execute the networking script to bring network interfaces up or down +# based on the given input action argument. # -run_network_script() + +exec_networking_script() { - script=`find_networking_script` - [ "$script" != "error" ] || Panic "Cannot find system networking script." + local script=$1 + local action=$2 - # Using SysV "service" if it exists, otherwise fall back to run the script directly + # Using SysV "service" if it exists, otherwise fall back to run the + # script directly service=`which service 2>/dev/null` if [ $? = 0 -a -n "$service" ]; then serviceName=`basename "$script"` - "$service" "$serviceName" "$1" + "$service" "$serviceName" "$action" else - "$script" "$1" + "$script" "$action" + fi + + return $? +} + + +# +# exec_systemctl_service -- +# +# Handle linux distributions that use systemd to replace the legacy +# system V startup scripts. The previous network script searching +# approach is no longer viable in these systems. Invoke the systemctl +# command to control the network service instead. +# + +exec_systemctl_service() +{ + local rc=1 + local action=$1 + local ctlcmd=$(which systemctl 2>/dev/null) + local service + + [ -z "$ctlcmd" ] && return $rc + + for svc in systemd-networkd network; do + if ! $ctlcmd status $svc | grep -iq 'not-found'; then + service=$svc && break + fi + done + + [ -z "$service" ] && return $rc + + $ctlcmd $action $service; rc=$? + + # When use the systemd-networkd service to shut down interfaces, interface + # address and state remain unchanged. Need to use ip command to change its + # address and state. + if [ $rc = 0 -a $service = 'systemd-networkd' -a $action = 'stop' ]; then + config_network_intfs $action; rc=$? + fi + + return $rc +} + + +# +# del_intf_ip -- +# +# Use the ip command to remove all the addresses of an interface. +# + +del_intf_ip() +{ + local nic=$1 + + $ip_cmd addr flush dev $nic + return $? +} + + +# +# ip_intf_ops -- +# +# Use the ip command to change the state of an interface to up or down. +# + +ip_intf_ops() +{ + local rc=1 + local nic=$1 + local ops=$2 + + [ -z "$ip_cmd" ] && return $rc + + $ip_cmd link set $nic $ops; rc=$? + + # Remove interface addresses when taking an interface down. + if [ $rc = 0 -a $ops = down ]; then + del_intf_ip $nic; rc=$? + fi + + return $rc +} + + +# +# intf_ops -- +# +# Execute the specified command (ifup or ifdown) if available, otherwise use +# the ip command as fallback. If ifup or ifdown fails, run the ip command to +# retry the intended operation. +# + +intf_ops() +{ + local rc=0 + local cmd=$1 + local ops=$2 + local nic=$3 + local tmp + + if [ ! -z "$cmd" ]; then + tmp=$($cmd $nic 2>&1); rc=$? + + # Some systems still return a successful status even the command fails + # because the interface is not configured in the configuration file. So + # have to examine the command output to determine the actual status. + if [ $rc = 0 ]; then + echo $tmp | egrep -iq 'not configured|ignoring unknown' && rc=1 + fi + fi + + # If ifup/ifdown fails, try the ip fallback. + if [ -z "$cmd" -o $rc != 0 ]; then + ip_intf_ops $nic $ops; rc=$? + fi + + return $rc +} + + +# +# exec_intf_ops -- +# +# Perform an operation to bring an individual interface up or down. +# + +exec_intf_ops() +{ + local rc=0 + local action=$1 + local nic=$2 + + case $action in + start) + intf_ops "$ifup_cmd" up $nic; rc=$? + ;; + stop) + intf_ops "$ifdown_cmd" down $nic; rc=$? + ;; + *) + Panic "Illegal interface action: $action" + ;; + esac + + return $rc +} + + +# +# config_network_intfs -- +# +# For Linux systems not supporting networking scripts to bring interfaces +# up or down, provide a way to change the interface state individually. +# + +config_network_intfs() +{ + local rc=0 + local action=$1 + + if [ -f "$activeList" ]; then + + while read nic; do + exec_intf_ops $action $nic + rc=$(expr $rc \| $?) + done < $activeList fi + + return $rc +} + + +# +# run_network_script -- +# +# Finds out how to run the system's script used to control networking, and +# runs it with the given argument (which should be one of the usual SysV +# init script arguments). If it does not work, tries the other alternatives. +# So far, our alternatives are (a) systemctl (b) network script (c) perform +# an individual interface state change. +# + +run_network_script() +{ + local action=$1 + local rc=0 + local script + + while true; do + + exec_systemctl_service $action + [ $? != 0 ] || break + + script=`find_networking_script` + + if [ $script != "error" ]; then + exec_networking_script $script $action + [ $? != 0 ] || break + fi + + # Since all the other alternatives fail, need to manually change + # individual interface state. + config_network_intfs $action; rc=$? + break + done + + return $rc } @@ -116,13 +324,25 @@ run_network_script() # None. # -save_active_NIC_list() { +save_active_NIC_list() +{ + local intf_out + >$activeList - for nic in `ifconfig | awk '/^eth/ { print $1 }'`; do - ifconfig $nic | egrep -q '\bUP\b' && echo $nic >> $activeList - exitCode=`expr $exitCode \| $?` - done + # Find out all the non-loopback up interfaces. Use ifconfig if available + # otherwise fall back to the ip command. + if [ -z "$ifconfig_cmd" ]; then + for nic in $($ip_cmd link show up | egrep '\bUP\b' | awk -F: '{print $2}'); do + $ip_cmd link show ${nic%@*} | grep -iq 'link/ether' && echo ${nic%@*} >> $activeList + done + else + for nic in $($ifconfig_cmd | sed -n 's/^\([^: \t]*\).*$/\1/p'); do + intf_out=$($ifconfig_cmd $nic) + echo $intf_out | grep -iq loopback && continue + echo $intf_out | egrep -q '\bUP\b' && echo $nic >> $activeList + done + fi } @@ -130,27 +350,41 @@ save_active_NIC_list() { # rescue_NIC -- # # For each NIC recorded in $activeList that is not currently "up", run -# "ifup $nic". +# "ifup $nic" or "ip link set $nic up" to bring the interface up. # # Results: # All downed NICs should be active. # -rescue_NIC() { +rescue_NIC() +{ + local rc=0 + local intf_out + if [ -f "$activeList" ]; then while read nic; do - if ifconfig $nic | egrep -q '\bUP\b'; then + if [ -z "$ifconfig_cmd" ]; then + intf_out=$($ip_cmd link show $nic up) + else + intf_out=$($ifconfig_cmd $nic) + fi + + if echo $intf_out | grep -q 'UP'; then echo `date` "[rescue_nic] $nic is already active." else echo `date` "[rescue_nic] activating $nic ..." - ifup $nic - exitCode=`expr $exitCode \| $?` + # Our best effort to activate interfaces, use ifup if available + # otherwise use the ip command as fallback. + intf_ops "$ifup_cmd" up $nic + rc=$(expr $rc \| $?) fi done < $activeList rm -f $activeList fi + + return $rc } @@ -173,32 +407,56 @@ TranquilizeNetworkManager() # `which' may be a bit noisy, so we'll shush it. dbusSend=`which dbus-send 2>/dev/null` rc=$? - if [ $rc = 0 ]; then - # NetworkManager 0.8.0 - $dbusSend --system --print-reply \ - --dest=org.freedesktop.NetworkManager \ - /org/freedesktop/NetworkManager \ - org.freedesktop.NetworkManager.Enable boolean:false - rc=$? - if [ $rc = 0 ]; then - return $rc - fi - # NetworkManager 0.7.0 - $dbusSend --system --print-reply \ - --dest=org.freedesktop.NetworkManager \ - /org/freedesktop/NetworkManager \ - org.freedesktop.NetworkManager.Sleep boolean:true - rc=$? - if [ $rc = 0 ]; then - return $rc - fi - # NetworkManager 0.6 - $dbusSend --system --print-reply \ - --dest=org.freedesktop.NetworkManager \ - /org/freedesktop/NetworkManager \ - org.freedesktop.NetworkManager.sleep - rc=$? + if [ $rc -ne 0 ]; then + return $rc fi + + # Check NetworkManager state before disabling it. + nm_state=`$dbusSend --system --print-reply \ + --dest=org.freedesktop.NetworkManager \ + /org/freedesktop/NetworkManager \ + org.freedesktop.DBus.Properties.Get \ + string:'org.freedesktop.NetworkManager' \ + string:'State' \ + | awk '/variant/ {print $3;}'` + if [ -z "$nm_state" ]; then + return 1 + fi + # NetworkManager API 0.7/0.8 0.9 + # NM_STATE_ASLEEP 1 10 + # NM_STATE_DISCONNECTED 4 20 + case $nm_state in + 1|4|10|20) + # Nothing needs to be done. + return 0 + ;; + esac + + # NetworkManager 0.8.0 and above + $dbusSend --system --print-reply \ + --dest=org.freedesktop.NetworkManager \ + /org/freedesktop/NetworkManager \ + org.freedesktop.NetworkManager.Enable boolean:false + rc=$? + if [ $rc -eq 0 ]; then + return $rc + fi + # NetworkManager 0.7.0 + $dbusSend --system --print-reply \ + --dest=org.freedesktop.NetworkManager \ + /org/freedesktop/NetworkManager \ + org.freedesktop.NetworkManager.Sleep boolean:true + rc=$? + if [ $rc -eq 0 ]; then + return $rc + fi + # NetworkManager 0.6 + $dbusSend --system --print-reply \ + --dest=org.freedesktop.NetworkManager \ + /org/freedesktop/NetworkManager \ + org.freedesktop.NetworkManager.sleep + rc=$? + return $rc } @@ -253,6 +511,27 @@ WakeNetworkManager() # +# sanity_check -- +# +# Check if the script has all the commands it needs to carry out the +# request. So far, it requires either ip or ifconfig command to read +# interface configuration. Ifup is not checked here. It is checked at +# the place where we need to do individual interface state change. +# + +sanity_check() +{ + ip_cmd=$(which ip 2>/dev/null) + ifconfig_cmd=$(which ifconfig 2>/dev/null) + ifup_cmd=$(which ifup 2>/dev/null) + ifdown_cmd=$(which ifdown 2>/dev/null) + + [ -z "$ifconfig_cmd" -a -z "$ip_cmd" ] && \ + Panic "ip and ifconfig not in search path." +} + + +# # main -- # # Main entry point. Perform some sanity checking, then map state change @@ -266,11 +545,6 @@ main() { exitCode=0 activeList=/var/run/vmware-active-nics - # XXX Are these really necessary? If so, we should have seen customer - # complaints by now. - which ifup >/dev/null 2>&1 || Panic "ifup not in search path." - which ifconfig >/dev/null 2>&1 || Panic "ifconfig not in search path." - case "$1" in poweron-vm) rm -f $activeList @@ -279,6 +553,7 @@ main() { TranquilizeNetworkManager exitCode=$? if [ $exitCode != 0 ]; then + sanity_check suspend-vm save_active_NIC_list run_network_script stop exitCode=$? @@ -288,6 +563,7 @@ main() { WakeNetworkManager exitCode=$? if [ $exitCode != 0 ]; then + sanity_check resume-vm # According to hfu, "/etc/init.d/networking restart" on Debian 5.0 # may bring down ethernet interfaces tagged as "allow-hotplug" without # bringing them back up.
Locations
Projects
Search
Status Monitor
Help
OpenBuildService.org
Documentation
API Documentation
Code of Conduct
Contact
Support
@OBShq
Terms
openSUSE Build Service is sponsored by
The Open Build Service is an
openSUSE project
.
Sign Up
Log In
Places
Places
All Projects
Status Monitor
