File CVE-2016-3710-qemut-0003-vga-factor-out-vga-reg... of Package xen.8005

Overview Repositories Revisions Requests Users Attributes Meta

File CVE-2016-3710-qemut-0003-vga-factor-out-vga-register-setup.patch of Package xen.8005

References: bsc#978164 CVE-2016-3710 XSA-179

From df228023ce39e8b72bd5a198b8703319b8b9ca23 Mon Sep 17 00:00:00 2001
From: Gerd Hoffmann <kraxel@redhat.com>
Date: Tue, 26 Apr 2016 15:24:18 +0200
Subject: [PATCH 3/5] vga: factor out vga register setup

When enabling vbe mode qemu will setup a bunch of vga registers to make
sure the vga emulation operates in correct mode for a linear
framebuffer.  Move that code to a separate function so we can call it
from other places too.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
[Backport to qemu-xen-tradition]
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
---
 hw/vga.c | 70 +++++++++++++++++++++++++++++++++++++---------------------------
 1 file changed, 41 insertions(+), 29 deletions(-)

Index: xen-4.4.4-testing/tools/qemu-xen-traditional-dir-remote/hw/vga.c
===================================================================
--- xen-4.4.4-testing.orig/tools/qemu-xen-traditional-dir-remote/hw/vga.c
+++ xen-4.4.4-testing/tools/qemu-xen-traditional-dir-remote/hw/vga.c
@@ -615,6 +615,46 @@ static void vbe_fixup_regs(VGAState *s)
     s->vbe_start_addr  = offset / 4;
 }
 
+/* we initialize the VGA graphic mode */
+static void vbe_update_vgaregs(VGAState *s)
+{
+    int h, shift_control;
+
+    if (!vbe_enabled(s)) {
+        /* vbe is turned off -- nothing to do */
+        return;
+    }
+
+    /* graphic mode + memory map 1 */
+    s->gr[0x06] = (s->gr[0x06] & ~0x0c) | 0x05;
+    s->cr[0x17] |= 3; /* no CGA modes */
+    s->cr[0x13] = s->vbe_line_offset >> 3;
+    /* width */
+    s->cr[0x01] = (s->vbe_regs[VBE_DISPI_INDEX_XRES] >> 3) - 1;
+    /* height (only meaningful if < 1024) */
+    h = s->vbe_regs[VBE_DISPI_INDEX_YRES] - 1;
+    s->cr[0x12] = h;
+    s->cr[0x07] = (s->cr[0x07] & ~0x42) |
+        ((h >> 7) & 0x02) | ((h >> 3) & 0x40);
+    /* line compare to 1023 */
+    s->cr[0x18] = 0xff;
+    s->cr[0x07] |= 0x10;
+    s->cr[0x09] |= 0x40;
+
+    if (s->vbe_regs[VBE_DISPI_INDEX_BPP] == 4) {
+        shift_control = 0;
+        s->sr[0x01] &= ~8; /* no double line */
+    } else {
+        shift_control = 2;
+        /* set chain 4 mode */
+        s->sr[4] |= 0x08;
+        /* activate all planes */
+        s->sr[2] |= 0x0f;
+    }
+    s->gr[0x05] = (s->gr[0x05] & ~0x60) | (shift_control << 5);
+    s->cr[0x09] &= ~0x9f; /* no double scan */
+}
+
 static uint32_t vbe_ioport_read_index(void *opaque, uint32_t addr)
 {
     VGAState *s = opaque;
@@ -698,7 +738,6 @@ static void vbe_ioport_write_data(void *
         case VBE_DISPI_INDEX_ENABLE:
             if ((val & VBE_DISPI_ENABLED) &&
                 !(s->vbe_regs[VBE_DISPI_INDEX_ENABLE] & VBE_DISPI_ENABLED)) {
-                int h, shift_control;
                 
                 if (s->vram_gmfn != s->lfb_addr) {
                      set_vram_mapping(s, s->lfb_addr, s->lfb_end);
@@ -709,40 +748,13 @@ static void vbe_ioport_write_data(void *
                 s->vbe_regs[VBE_DISPI_INDEX_Y_OFFSET] = 0;
                 s->vbe_regs[VBE_DISPI_INDEX_ENABLE] |= VBE_DISPI_ENABLED;
                 vbe_fixup_regs(s);
+                vbe_update_vgaregs(s);
 
                 /* clear the screen (should be done in BIOS) */
                 if (!(val & VBE_DISPI_NOCLEARMEM)) {
                     memset(s->vram_ptr, 0,
                            s->vbe_regs[VBE_DISPI_INDEX_YRES] * s->vbe_line_offset);
                 }
-
-                /* we initialize the VGA graphic mode (should be done
-                   in BIOS) */
-                s->gr[0x06] = (s->gr[0x06] & ~0x0c) | 0x05; /* graphic mode + memory map 1 */
-                s->cr[0x17] |= 3; /* no CGA modes */
-                s->cr[0x13] = s->vbe_line_offset >> 3;
-                /* width */
-                s->cr[0x01] = (s->vbe_regs[VBE_DISPI_INDEX_XRES] >> 3) - 1;
-                /* height (only meaningful if < 1024) */
-                h = s->vbe_regs[VBE_DISPI_INDEX_YRES] - 1;
-                s->cr[0x12] = h;
-                s->cr[0x07] = (s->cr[0x07] & ~0x42) |
-                    ((h >> 7) & 0x02) | ((h >> 3) & 0x40);
-                /* line compare to 1023 */
-                s->cr[0x18] = 0xff;
-                s->cr[0x07] |= 0x10;
-                s->cr[0x09] |= 0x40;
-
-                if (s->vbe_regs[VBE_DISPI_INDEX_BPP] == 4) {
-                    shift_control = 0;
-                    s->sr[0x01] &= ~8; /* no double line */
-                } else {
-                    shift_control = 2;
-                    s->sr[4] |= 0x08; /* set chain 4 mode */
-                    s->sr[2] |= 0x0f; /* activate all planes */
-                }
-                s->gr[0x05] = (s->gr[0x05] & ~0x60) | (shift_control << 5);
-                s->cr[0x09] &= ~0x9f; /* no double scan */
             } else {
                 /* XXX: the bios should do that */
                 s->bank_offset = 0;

Places

File CVE-2016-3710-qemut-0003-vga-factor-out-vga-register-setup.patch of Package xen.8005

Places