File 0026-board-rpi-move-uart-deactivation-to.patch of Package u-boot-cubietruck

Overview Repositories Revisions Requests Users Attributes Meta

File 0026-board-rpi-move-uart-deactivation-to.patch of Package u-boot-cubietruck

From 0d50b0f4a28f9d4781336374496bc5e808af6fd3 Mon Sep 17 00:00:00 2001
From: Fabian Vogt <fvogt@suse.com>
Date: Tue, 13 Sep 2016 15:53:14 +0200
Subject: [PATCH] board: rpi: move uart deactivation to board_init

When using OF_CONTROL, the disabled value of the mini UART platdata
gets reset after board_early_init_f. So move detection and disabling
to board_init and remove board_early_init_f.
---
 board/raspberrypi/rpi/rpi.c | 44 ++++++++++++++++++++++++++++----------------
 include/configs/rpi.h       |  1 -
 2 files changed, 28 insertions(+), 17 deletions(-)

diff --git a/board/raspberrypi/rpi/rpi.c b/board/raspberrypi/rpi/rpi.c
index feaa21e..a88c01b 100644
--- a/board/raspberrypi/rpi/rpi.c
+++ b/board/raspberrypi/rpi/rpi.c
@@ -442,18 +442,9 @@ static void get_board_rev(void)
 	printf("RPI %s (0x%x)\n", model->name, revision);
 }
 
-int board_init(void)
-{
-	get_board_rev();
-
-	gd->bd->bi_boot_params = 0x100;
-
-	return power_on_module(BCM2835_MBOX_POWER_DEVID_USB_HCD);
-}
-
+#ifndef CONFIG_PL01X_SERIAL
 static bool rpi_is_serial_active(void)
 {
-#ifndef CONFIG_PL01X_SERIAL
 	int serial_gpio = 15;
 	struct udevice *dev;
 
@@ -466,18 +457,39 @@ static bool rpi_is_serial_active(void)
 
 	if (bcm2835_gpio_get_func_id(dev, serial_gpio) != BCM2835_GPIO_ALT5)
 		return false;
-#endif
 
 	return true;
 }
 
-int board_late_init(void)
+/* Disable mini-UART I/O if it's not pinmuxed to our pins.
+ * The firmware only enables it if explicitly done in config.txt: enable_uart=1
+ */
+static void rpi_disable_inactive_uart(void)
 {
-	/* Disable mini-UART I/O if it's not pinmuxed to our pins */
-	if (!rpi_is_serial_active())
-		gd->cur_serial_dev = NULL;
+	struct udevice *dev;
+	struct bcm283x_mu_serial_platdata *plat;
 
-	return 0;
+	if (uclass_first_device(UCLASS_SERIAL, &dev) || !dev)
+		return;
+
+	if (!rpi_is_serial_active()) {
+		plat = dev_get_platdata(dev);
+		plat->disabled = true;
+	}
+}
+#endif
+
+int board_init(void)
+{
+#ifndef CONFIG_PL01X_SERIAL
+	rpi_disable_inactive_uart();
+#endif
+
+	get_board_rev();
+
+	gd->bd->bi_boot_params = 0x100;
+
+	return power_on_module(BCM2835_MBOX_POWER_DEVID_USB_HCD);
 }
 
 int board_mmc_init(bd_t *bis)
diff --git a/include/configs/rpi.h b/include/configs/rpi.h
index e3b890a..b5543f4 100644
--- a/include/configs/rpi.h
+++ b/include/configs/rpi.h
@@ -22,7 +22,6 @@
 
 /* Architecture, CPU, etc.*/
 #define CONFIG_ARCH_CPU_INIT
-#define CONFIG_BOARD_LATE_INIT
 
 /* Use SoC timer for AArch32, but architected timer for AArch64 */
 #ifndef CONFIG_ARM64

Places

File 0026-board-rpi-move-uart-deactivation-to.patch of Package u-boot-cubietruck

Places