File 57580bbd-kexec-allow-relaxed-placement-via-cmdl... of Package xen.5852

Overview Repositories Revisions Requests Users Attributes Meta

File 57580bbd-kexec-allow-relaxed-placement-via-cmdline.patch of Package xen.5852

References: bsc#900418

# Commit cd42ccb27f4e364b6e75b6fecb06bb99ad8da988
# Date 2016-06-08 14:12:45 +0200
# Author Jan Beulich <jbeulich@suse.com>
# Committer Jan Beulich <jbeulich@suse.com>
kexec: allow relaxed placement specification via command line

Rather than just allowing a fixed address or fully automatic placement,
also allow for specifying an upper bound. Especially on EFI systems,
where firmware memory use is commonly less predictable than on legacy
BIOS ones, this makes success of the reservation more likely when
automatic placement is not an option (e.g. because of special DMA
restrictions of devices involved in actually carrying out the dump).

Also take the opportunity to actually add text to the "crashkernel"
entry in the command line option doc.

Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: David Vrabel <david.vrabel@citrix.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>

Index: xen-4.7.3-testing/docs/misc/xen-command-line.markdown
===================================================================
--- xen-4.7.3-testing.orig/docs/misc/xen-command-line.markdown
+++ xen-4.7.3-testing/docs/misc/xen-command-line.markdown
@@ -458,7 +458,18 @@ Specify the maximum address to allocate
 combination with the `low_crashinfo` command line option.
 
 ### crashkernel
-> `= <ramsize-range>:<size>[,...][@<offset>]`
+> `= <ramsize-range>:<size>[,...][{@,<}<offset>]`
+> `= <size>[{@,<}<offset>]`
+
+Specify sizes and optionally placement of the crash kernel reservation
+area.  The `<ramsize-range>:<size>` pairs indicate how much memory to
+set aside for a crash kernel (`<size>`) for a given range of installed
+RAM (`<ramsize-range>`).  Each `<ramsize-range>` is of the form
+`<start>-[<end>]`.
+
+A trailing `@<offset>` specifies the exact address this area should be
+placed at, whereas `<` in place of `@` just specifies an upper bound of
+the address range the area should fall into.
 
 ### credit2\_balance\_over
 > `= <integer>`
Index: xen-4.7.3-testing/xen/arch/x86/setup.c
===================================================================
--- xen-4.7.3-testing.orig/xen/arch/x86/setup.c
+++ xen-4.7.3-testing/xen/arch/x86/setup.c
@@ -1057,13 +1057,23 @@ void __init noreturn __start_xen(unsigne
         }
 
 #ifdef CONFIG_KEXEC
-        /* Don't overlap with modules (or Xen itself). */
-        e = consider_modules(s, e, PAGE_ALIGN(kexec_crash_area.size), mod,
-                             mbi->mods_count + efi_enabled, -1);
-        if ( !kexec_crash_area.start && (s < e) )
+        /*
+         * Looking backwards from the crash area limit, find a large
+         * enough range that does not overlap with modules.
+         */
+        while ( !kexec_crash_area.start )
         {
-            e = (e - kexec_crash_area.size) & PAGE_MASK;
-            kexec_crash_area.start = e;
+            /* Don't overlap with modules. */
+            e = consider_modules(s, e, PAGE_ALIGN(kexec_crash_area.size),
+                                 mod, mbi->mods_count + efi_enabled, -1);
+            if ( s >= e )
+                break;
+            if ( e > kexec_crash_area_limit )
+            {
+                e = kexec_crash_area_limit & PAGE_MASK;
+                continue;
+            }
+            kexec_crash_area.start = (e - kexec_crash_area.size) & PAGE_MASK;
         }
 #endif
     }
Index: xen-4.7.3-testing/xen/common/kexec.c
===================================================================
--- xen-4.7.3-testing.orig/xen/common/kexec.c
+++ xen-4.7.3-testing/xen/common/kexec.c
@@ -60,6 +60,7 @@ static unsigned char vmcoreinfo_data[VMC
 static size_t vmcoreinfo_size = 0;
 
 xen_kexec_reserve_t kexec_crash_area;
+paddr_t __initdata kexec_crash_area_limit = ~(paddr_t)0;
 static struct {
     u64 start, end;
     unsigned long size;
@@ -86,7 +87,7 @@ static void *crash_heap_current = NULL,
 /*
  * Parse command lines in the format
  *
- *   crashkernel=<ramsize-range>:<size>[,...][@<offset>]
+ *   crashkernel=<ramsize-range>:<size>[,...][{@,<}<address>]
  *
  * with <ramsize-range> being of form
  *
@@ -94,7 +95,7 @@ static void *crash_heap_current = NULL,
  *
  * as well as the legacy ones in the format
  *
- *   crashkernel=<size>[@<offset>]
+ *   crashkernel=<size>[{@,<}<address>]
  */
 static void __init parse_crashkernel(const char *str)
 {
@@ -109,7 +110,7 @@ static void __init parse_crashkernel(con
             {
                 printk(XENLOG_WARNING "crashkernel: too many ranges\n");
                 cur = NULL;
-                str = strchr(str, '@');
+                str = strpbrk(str, "@<");
                 break;
             }
 
@@ -154,9 +155,16 @@ static void __init parse_crashkernel(con
     }
     else
         kexec_crash_area.size = parse_size_and_unit(cur = str, &str);
-    if ( cur != str && *str == '@' )
-        kexec_crash_area.start = parse_size_and_unit(cur = str + 1, &str);
-    if ( cur == str )
+    if ( cur != str )
+    {
+        if ( *str == '@' )
+            kexec_crash_area.start = parse_size_and_unit(cur = str + 1, &str);
+        else if ( *str == '<' )
+            kexec_crash_area_limit = parse_size_and_unit(cur = str + 1, &str);
+        else
+            printk(XENLOG_WARNING "crashkernel: '%s' ignored\n", str);
+    }
+    if ( cur && cur == str )
         printk(XENLOG_WARNING "crashkernel: memory value expected\n");
 }
 custom_param("crashkernel", parse_crashkernel);
Index: xen-4.7.3-testing/xen/include/xen/kexec.h
===================================================================
--- xen-4.7.3-testing.orig/xen/include/xen/kexec.h
+++ xen-4.7.3-testing/xen/include/xen/kexec.h
@@ -14,6 +14,7 @@ typedef struct xen_kexec_reserve {
 } xen_kexec_reserve_t;
 
 extern xen_kexec_reserve_t kexec_crash_area;
+extern paddr_t kexec_crash_area_limit;
 
 extern bool_t kexecing;

Places

File 57580bbd-kexec-allow-relaxed-placement-via-cmdline.patch of Package xen.5852

Places