Sign Up
Log In
Log In
or
Sign Up
Places
All Projects
Status Monitor
Collapse sidebar
SUSE:SLE-12-SP4:Update
smartmontools.6682
smartmontools.changes
Overview
Repositories
Revisions
Requests
Users
Attributes
Meta
File smartmontools.changes of Package smartmontools.6682
------------------------------------------------------------------- Thu Feb 8 19:49:07 CET 2018 - sbrabec@suse.com - Make possible to disable broken SAT support by -d scsi+cciss,N (bsc#1038271, smartmontools-scsiata-scsi_only.patch, https://www.smartmontools.org/ticket/871). - Update smartmontools.keyring. ------------------------------------------------------------------- Mon Dec 18 04:03:10 UTC 2017 - avindra@opensuse.org - update to 6.6 version (FATE#321901, FATE#322874) - smartctl: * -i' and '--identify': ATA ACS-4 and SATA 3.3 enhancements. * Control ATA write cache through SCT Feature Control with '-s wcache-sct,ata|on|off[,p]' and '-g wcache-sct'. * Print ATA Pending Defects log with '-l defects'. * '-s wcreorder,on|off': New persistent flag ',p'. * '-s standby': Prevent temporary drive spinup. * '-n POWERMODE': New parameter to set exit status. * '-g security': ATA Security Level check fixed. * '-l scttemp*': Print minimum supported ERC Time Limit. * '-q noserial': Now also suppresses "SAS address" output. * '-i': Print IEEE EUI-64 of NVMe namespace. * '-c': Print NVMe 1.3 feature flags. * '-A': Print NVMe 1.3 thermal temperature transition statistic. * '-g/s dsn': Get/set ATA DSN. - smartd * Uses also device identify information to detect for duplicate devices. * '-e dsn' directive: Set ATA DSN. * Improved SCSI/SAS temperature logging. * Silence emails and log messages on open errors of '-d removable' devices. * Exit on device open error unless '-q never' or '-d removable' is specified (regression). - update-smart-drivedb: Now authenticates downloaded file with GnuPG. - update-smart-drivedb: New options '--trunk', '--no-verify' and '--export-key'. - Device type '-d intelliprop,N' for IntelliProp controllers. - SCSI: Default timeout increased to 1 minute. - configure: New options '--with-gnupg', '--with-scriptpath' and '--with-update-smart-drivedb=X.Y' - configure: Checks for C++11 support option and requires '--with[out]-cxx11-option' if option unknown or no C++11 support. - HDD, SSD and USB additions to drive database. - New smartmontools-* mailing list addresses. - Man page formatting reworked. - Linux: * Uses SG_IO V4 API if supported. * Devices behind hpsa driver are no longer detected as regular SCSI devices. - Darwin: Initial NVMe support based on undocumented API. - FreeBSD: * Fix panic on INVARIANTS enabled kernel. * Improve ATA SMART STATUS check for legacy controllers. * Compile fix for FreeBSD-11 and newer. - NetBSD: * NVMe support. * Full 28-bit ATA support. * Compile fix. * Use a raw disk device file. - OpenBSD: Compile fix. - OS/2: Support for the OS2AHCI driver, updating source code, adding autoscan support, adding self-test support. - Windows fixes: * Support for Windows 10 NVMe driver (stornvme.sys). * Fix CSMI access for IRST driver 15.2. * smartd: Ability to run PowerShell scripts with '-M exec'. * smartd: New PowerShell script to send smartd warning emails without external tools. * package now provides PDF man pages. - switch to new url - drop upstreamed patches: * smartmontools-scsi-suppress-no-temperature.patch * smartmontools-scsi-temperature-check.patch * smartmontools-log-scsi-temperature.patch - regen smartmontools-drivedb.h ------------------------------------------------------------------- Fri Jul 14 21:04:35 CEST 2017 - sbrabec@suse.com - SCSI temperature error fixes (bsc#1047198, smartmontools-scsi-suppress-no-temperature.patch, smartmontools-scsi-temperature-check.patch, smartmontools-log-scsi-temperature.patch). ------------------------------------------------------------------- Mon Dec 19 14:49:48 CET 2016 - sbrabec@suse.com - Drop systemd dependency on syslog.target (bsc#983938, smartmontools-systemd-no-syslog.patch). https://lists.opensuse.org/opensuse-packaging/2013-05/msg00102.html ------------------------------------------------------------------- Wed Dec 7 14:57:37 CET 2016- aginies@suse.com - update to 6.5 version * Experimental support for NVMe devices on FreeBSD, Linux and Windows. * smartctl '-i', '-c', '-H' and '-l error': NVMe support. * smartctl '-l nvmelog': New option for NVMe. * smartd.conf '-H', '-l error' and '-W': NVMe support. * Optional NVMe device scanning support on Linux and Windows. * configure option '--with-nvme-devicescan' to include NVMe in * default device scanning result. * Device scanning now allows to specify multiple '-d TYPE' options. * ATA: Added new POWER MODE values introduced in ATA ACS-2. * ATA: SCT commands are no longer issued if ATA Security is locked. * SCSI: LB provisioning improvements. * SCSI: Fixed GLTSD bit set/cleared info messages. * SCSI: Solid State media log page is no longer checked for tapes. * SCSI: Improved handling when no tape cartridge in drive. * SCSI: Workaround for buggy Seagate firmware. * SAT: Improved heuristics to detect bogus sense data from SAT layer. * smartd: Fixed crash on missing argument to '-s' directive. update-smart-drivedb: Now uses HTTPS for download by default. * update-smart-drivedb: New options to select URL and download tool. * update-smart-drivedb: New download tool 'svn'. * configure option '--without-update-smart-drivedb' to disable update-smart-drivedb script. * configure options '--disable-drivedb', '--enable-savestates', '--enable-attributelog' and '--with-docdir' are no longer supported. * autoconf < 2.60 and automake < 1.10 are no longer supported. * Drive database file now also includes the DEFAULT setting for each attribute. * HDD, SSD and USB additions to drive database. * Darwin: New support files for package installer. * New makefile target 'install-darwin' builds DMG image. * Solaris: Auto detection of SATA devices behind SAT layer. * Solaris SPARC: Legacy ATA support disabled by default. New configure option '--with-solaris-sparc-ata' enables it. File os_solaris_ata.s is no longer included in source tarball. * Windows: Auto detection of USB devices specified by drive letter. * Windows: Device scanning does no longer ignore unknown USB devices. * Windows: Prevent drive spin up by '-n standby' check. * Windows: New application manifests indicating Win 10 support. * Windows smartd: '-m [sys]msgbox' is no longer supported. * Windows installer: Defaults to 64-bit version on 64-bit Windows. * Various code changes suggested by Clang Static Analyser and Cppcheck. - enable "--with-nvme-devicescan" option - update smartmontools-drivedb.h file - use --with-savestates, --with-attributelog, --docdir instead of old options ------------------------------------------------------------------- Thu Jan 14 09:06:55 UTC 2016 - meissner@suse.com - replaced keyring with 2015/2016 key. pub rsa2048/0xDF0F1A49C4A4903A 2014-12-31 [verfällt: 2016-12-31] Schl.-Fingerabdruck = F41F 01FC 0784 4958 4FFC CF57 DF0F 1A49 C4A4 903A uid [ unbekannt] Smartmontools Signing Key (through 2016) <smartmontools-support@lists.sourceforge.net> ------------------------------------------------------------------- Sun Jan 10 14:09:14 UTC 2016 - p.drouand@gmail.com - Update to version 6.0.4 * Device type ' *d usbprolific' for Prolific PL2571/277x USB bridges. * SAT: Support for ATA registers returned in fixed format sense data. * smartctl ' *i' and ' * *identify': ATA ACS *4 and SATA 3.2 enhancements. * smartctl ' *l xerror': Support for logs with more than 255 pages. * smartctl ' *l devstat': Prints ACS *3 DSN flags. * smartctl ' *l devstat': Read via SMART command if GP log is not available. * smartctl ' *l scttempsts': Prints SCT SMART STATUS (ACS *4) and vendor specific SCT bytes. * configure option ' * *with *systemdenvfile=auto' as new default. * configure options ' * *disable *drivedb', ' * *enable *savestates' and ' * *enable *attributelog' are deprecated. * Corresponding ' * *with **' options are enhanced accordingly. * Configure option ' * *with *docdir' is deprecated. * autoconf < 2.60 and automake < 1.10 are deprecated. (all of the above still work but a warning is printed if used) * HDD, SSD and USB additions to drive database. * Linux: AACRAID fixes, SMART STATUS should work now. * Linux: '/dev/megaraid_sas_ioctl_node' fd leak fix. * Darwin: ' *S' command implemented, ' *l devstat' should work now. * Cygwin: Compile fix. * Windows: Device type ' *d aacraid' for AACRAID controllers. * Windows: SAT autodetection based on IOCTL_STORAGE_QUERY_PROPERTY. * Windows installer: Fix possible loss of user PATH environment variable. - Update smartmontools-drivedb.h to the latest version from the upstream branch RELEASE_6_4_DRIVEDB. - Cleanup and remove conditional macros; the package doesn't build for SLE anyway - Remove smartmontools-default-enabled.patch; not needed anymore ------------------------------------------------------------------- Tue Mar 10 14:49:55 CET 2015 - sbrabec@suse.cz - Run Self Tests: * Short Self Test every night * Extended Self Test every month * Discussion: http://lists.opensuse.org/opensuse-factory/2015-03/msg00040.html - Dropped smartmontools-removable.patch - Created smartmontools-suse-default.patch ------------------------------------------------------------------- Mon Mar 9 17:29:15 CET 2015 - sbrabec@suse.cz - Package empty /etc/smartd_warning.d for warning plugins. - smartmontools-drivedb_h-update.sh: Fix default branch name. - Comment fixes. ------------------------------------------------------------------- Tue Mar 3 17:35:15 CET 2015 - sbrabec@suse.cz - Improve drivedb.h update scriptlets: Detect update across branches. - Check state of smartmontools-drivedb.h in %prep. - Add ghost records for files created by update-smart-drivedb. - Improve smartmontools-drivedb_h-update.sh script: Perform spec file changess. - Clean up on uninstall. - Update smartmontools-drivedb.h to the latest version from the upstream branch RELEASE_6_3_DRIVEDB. ------------------------------------------------------------------- Fri Nov 14 09:19:11 UTC 2014 - dimstar@opensuse.org - No longer perform gpg validation; osc source_validator does it implicit: + Drop gpg-offline BuildRequires. + No longer execute gpg_verify. ------------------------------------------------------------------- Tue Oct 7 22:55:04 CEST 2014 - sbrabec@suse.cz - Re-add /usr/sbin/rcsmards symlink (bnc#900099). - Fix service restart in smartmontools.generate_smartd_opts.in (bnc#900099). ------------------------------------------------------------------- Wed Sep 3 13:27:11 CEST 2014 - ro@suse.de - re-add sysvinit support in specfile (fix build on sles11) ------------------------------------------------------------------- Wed Sep 3 13:01:54 CEST 2014 - ro@suse.de - update to version 6.3 - smartctl: Fixed bogus error messages from '-g/-s wcreorder'. - smartctl prints ATA form factor. - SCSI: Improved support of modern disks (SAS SSDs). - SCSI: Fixed sense data noise from old disks. - update-smart-drivedb man page. - configure option '--with-smartdscriptdir'. - configure option '--with-smartdplugindir'. - configure option '--with-systemdenvfile'. - configure option '--with-working-snprintf'. - Removed build time stamps to support reproducible builds. - Compile fixes for C++11. - HDD, SSD and USB additions to drive database. - Linux: Support for controllers behind AACRAID driver. - Linux: Fixed DEVICESCAN max path count. - FreeBSD: Fixed possible crash caused by wrong SCSI error handling. - FreeBSD: Compile fix for kFreeBSD. - Windows: Reworked CSMI port scanning. - QNX: Compile fix. - dropped patches: smartmontools-nobuild-date.patch (code removed upstream) ------------------------------------------------------------------- Mon May 26 15:26:24 UTC 2014 - crrodriguez@opensuse.org - Build with large file support in 32 bit systems. ------------------------------------------------------------------- Thu Dec 5 18:52:44 UTC 2013 - sbrabec@suse.com - Add supplementary drivedb.h update script (smartmontools-drivedb_h-update.sh, bnc#851276). - Skip drivedb.h verification by rpm -V (bnc#851276). - Implement intelligent drivedb.h update not overwriting newer drivedb.h releases. - Update smartmontools-drivedb.h to the latest version from the upstream branch trunk. ------------------------------------------------------------------- Mon Jul 29 18:12:00 CEST 2013 - sbrabec@suse.cz - Update to version 6.2: * smartctl: Added ATA write cache reordering control using '-g wcreorder' and '-s wcreorder,[on|off]' options. * update-smart-drivedb: Updated for new SVN repository. * HDD, SSD and USB additions to drive database. * Areca RAID support: Fixed possible segfault on empty port. * HPT RAID support: Maximum disk number increased to 128. ------------------------------------------------------------------- Fri Apr 5 11:24:43 UTC 2013 - idonmez@suse.com - Add Source URL, see https://en.opensuse.org/SourceUrls ------------------------------------------------------------------- Wed Apr 3 23:53:45 UTC 2013 - crrodriguez@opensuse.org - remove all sysvinit support. ------------------------------------------------------------------- Mon Mar 18 18:28:10 CET 2013 - sbrabec@suse.cz - Update to version 6.1: * smartctl -l improved. * smartctl -s/-g wcache and rcache for SCSI devices. * smartctl prints more info for ATA and SCSI devices. * smartctl '--identify' updated for latest ATA ACS-3 spec. * smartd runs /etc/smartd_warning.sh to generate warning emails. * smartd '-w PATH' option to specify this executable. * smartd '-d ignore' directive. * smartd DEVICESCAN ignores devices already specified. * smartd: added support for -s and -A for SCSI devices. * smartd '-W' directive uses ATA attribute 190 if 194 is missing. * Support of larger SCSI defect lists via READ DEFECT(12). * Device type '-d usbjmicron,p' for Prolific USB bridges. * Many HDD, SSD and USB additions to drive database. * Support for SAS disks behind Areca controllers. * Improved support for SATA disks on LSI/Megaraid controllers. * Disks on MegaRaid controllers are automatically scanned. - smartmontools.keyring: New signing key for the next 2 years. ------------------------------------------------------------------- Wed Dec 12 19:47:57 CET 2012 - sbrabec@suse.cz - Use sysconfig variables (sed on smartd.service.in) and generate smartd_opts for systemd smartd.service. - Remove obsolete parsing of /etc/default/smartmontools (it is no more in upstream installation). ------------------------------------------------------------------- Thu Nov 29 19:09:35 CET 2012 - sbrabec@suse.cz - Verify GPG signature. ------------------------------------------------------------------- Tue Nov 20 19:19:59 CET 2012 - sbrabec@suse.cz - Re-introduce smartmontools-sysconfig.patch with SMARTD_SAVESTATES, SMARTD_ATTRLOG and SMARTD_EXTRA_OPTS sysconfig variables (bnc#790044). ------------------------------------------------------------------- Thu Nov 15 17:10:02 CET 2012 - sbrabec@suse.cz - Update to version 6.0 (bnc#789204): * option/directive '-F nologdir' and '-F xerrorlba'. * smartctl '--identify' option. * smartctl prints nominal media rotation rate (ATA). * smartctl prints SATA version and speed. * smartctl '-l sataphy' works for CD/DVD drives also. * smartctl '-x' includes ATA Device Statistics. * smartd warning emails include device identify info. * smartd '-d' output is flushed to support redirection. * Many HDD, SSD and USB additions to drive database. * smartctl options '-g, --get' and '-s, --set' to get/set various ATA settings: AAM, APM, Read look-ahead, Write cache, Security (freeze), Standby mode/timer. * smartd directive '-e' to set (most of) the above settings on startup. * smartctl options '-f hex' and '-f hex,[id|val]'. * smartctl does not start ATA self-test if another test is already running. Override with new option '-t force'. * smartctl supports extended self-test polling times greater than 255 minutes. * Controller-independent SAT detection: '-d sat,auto[+TYPE]'. * smartd.conf DEFAULT directive. * Support for SATA disks behind Areca SAS RAID controllers and HP Smart Array controllers. ------------------------------------------------------------------- Tue Nov 6 14:30:35 UTC 2012 - coolo@suse.com - do no longer require syslog on 12.3, journal is enough for some installations ------------------------------------------------------------------- Tue Sep 11 14:25:07 UTC 2012 - coolo@suse.com - buildrequire systemd to have working rpm macros ------------------------------------------------------------------- Thu May 31 20:25:44 UTC 2012 - sweet_f_a@gmx.de - update to the _latest_ smartmontools-5.42 tarball, see http://sourceforge.net/mailarchive/message.php?msg_id=28262364 "The PKG_PROG_PKG_CONFIG macro was not expanded in configure" - remove automake dependency ------------------------------------------------------------------- Tue Feb 21 19:32:51 CET 2012 - sbrabec@suse.cz - Disable PIE for SLE9. ------------------------------------------------------------------- Wed Nov 30 10:23:56 UTC 2011 - coolo@suse.com - add automake as buildrequire to avoid implicit dependency ------------------------------------------------------------------- Tue Nov 22 21:30:08 UTC 2011 - crrodriguez@opensuse.org - When in a virtualized envirnment, hard disk monitoring with smartd is a task for the host, make systemd to skip the service if found running in such setup. ------------------------------------------------------------------- Fri Oct 21 15:54:22 CEST 2011 - sbrabec@suse.cz - Upgrade to version 5.42 (bnc#725631): * smartctl option '-l devstat' (Device Statistics). * smartctl option '-l ssd' (SSD endurance indicator). * smartd logs identify information of each SCSI/SAS device. * smartd resends warning emails if problem reappears. * smartd directives '-l offlinests' and '-l selfteststs'. * Many HDD, SSD and USB additions to drive database. * Platform-specific man pages. * smartd.8 man page no longer includes smartd.conf.5. * Support for Areca controllers enhanced. - Fixed pid file location (bnc#714647). ------------------------------------------------------------------- Mon Oct 10 14:24:33 UTC 2011 - bruno@ioda-net.ch - reuse of %makeinstall to build for SLES11_SP1- ------------------------------------------------------------------- Sun Oct 9 17:17:45 UTC 2011 - bruno@ioda-net.ch - upgrade to 5.41 Date 2011-06-09 - Failed self-tests outdated by a newer successful extended self-test are no longer reported as errors. - Support for ATA Long Logical/Physical Sectors (LLS/LPS). - 'smartctl --scan-open' can create a draft smartd.conf. - smartctl prints World Wide Name (WWN) of ATA device. - smartctl option '-f brief' to select new attribute output format which includes more flags and fits in 80 columns. - smartd logs identify information and WWN of each ATA device. - smartd logs warning from drive database if present. - smartd logs changes of offline data collection status. - smartd directive '-l scterc,READTIME,WRITETIME'. - smartd preserves last scheduled selective self-tests span. - 'smartd.service' file for systemd. - configure option '--with-systemdsystemunitdir' - configure option '--with-exampledir'. - configure searches for init.d or rc.d directory. - 'make install' does no longer overwrite an existing smartd.conf file. - 'update-smart-drivedb' does no longer require GNU sed. - Many HDD, SSD and USB additions to drive database. - Linux USB autodetection: Enable '-d sat,16' for newer kernels. - Linux megaraid: Fix segfault on non-data SCSI commands. - Linux megaraid: Fix pass-through of non-data ATA commands. - clean up old patches included in upstream - added systemd upstream configure option - added patch for FSF-address - clean up spec with spec-cleaner- ------------------------------------------------------------------- Wed Jun 8 20:17:25 CEST 2011 - sbrabec@suse.cz - Added sysconfig options to set arbitrary smartd options and disable persistent state writes and attribute log (FATE#310460). - Decrease log message on unsupported state writes to DEBUG (FATE#310460). - Change sysconfig ServiceReload to ServiceRestart, otherwise sysconfig changes will not take effect until restart. ------------------------------------------------------------------- Mon Mar 21 16:48:36 UTC 2011 - coolo@novell.com - licenses package is about to die ------------------------------------------------------------------- Thu Feb 3 17:22:27 CET 2011 - pgajdos@suse.cz - fixed smartctl -V command to show version [bnc#647521] * modified nobuild-date.patch ------------------------------------------------------------------- Thu Jan 13 16:03:00 CET 2011 - sbrabec@suse.cz - Removed support for SLE9 and older. ------------------------------------------------------------------- Tue Dec 7 21:39:33 UTC 2010 - coolo@novell.com - prereq init script syslog ------------------------------------------------------------------- Thu Oct 21 18:29:39 CEST 2010 - ro@suse.de - update to final 5.40 - configure: '--enable-drivedb' is now the default. - Improved support for Intel SSDs. - Improved support for SandForce based SSDs. - Many additions to drive database. - smartctl option '-t vendor,N'. - Linux: Support SATA drives on LSI 3ware 9750 controllers. - Fix regression in smartd SMARTD_DEVICE and SMARTD_DEVICETYPE environment variables. ------------------------------------------------------------------- Wed Oct 6 16:55:28 CEST 2010 - sbrabec@suse.cz - Added rpmlintrc. - Removed Obsoletes for ancient packages. - Enabled attribute log. ------------------------------------------------------------------- Tue Sep 28 17:20:37 UTC 2010 - cristian.rodriguez@opensuse.org - Fix patch to remove build Dates - Update to a newer version of 5.39.1 branch in order to support libcap-ng so smartd can drop privileges ------------------------------------------------------------------- Sun Aug 29 18:56:43 UTC 2010 - cristian.rodriguez@opensuse.org - Do not include build enviroment infon in the binaries including date and time of compilation, makes build-compare happier. ------------------------------------------------------------------- Mon Jun 28 06:38:35 UTC 2010 - jengelh@medozas.de - use %_smp_mflags ------------------------------------------------------------------- Wed Feb 10 15:26:37 CET 2010 - sbrabec@suse.cz - Updated to version 5.39.1: * Fix regression in smartctl option '-q, --quietmode'. * Fix regression in smartd directive '-l selftest'. * Linux: Allow smartd 'DEVICESCAN -d sat'. * Linux: Fix spin-up of SATA drive if '-n standby' is used (bnc#576662). * Support for up to 128 devices on 3ware controllers * smartctl option '-l xerror' to print ATA SMART Extended Comprehensive Error Log * Option '-d sat+TYPE' to use SAT with controllers which require '-d TYPE' * Option '-v ID,RAW_FORMAT,ATTR_NAME' to add new vendor specific attributes * Support for SSD drives using 64-bit raw attributes * Many additions to drive database * New simplified syntax for drive database * Configure option to add drive database file to distribution * smartd can now handle attributes 197 and 198 with increasing raw values * smartd logs changes of self-test execution status * smartd directive '-n powermode,N' to limit the number of skipped checks * smartd flag '!' for '-r' and '-R' directives to log changes as critical * Self-tests scheduled during system downtime or disk standby are run after next startup (bnc#469859). * smartd option '-s PREFIX' to store smartd internal state until next startup * smartd option '-A PREFIX' to log attributes at each check cycle * Configure options to enable the above by default * Change to an object oriented interface to access ATA and SCSI devices * Modules migrated to new interface * Rework of smartd data structures * Checkin date and SVN revision and optional BUILD_INFO printed in version info * SELinux fixes to 3ware device node creation * Use getaddrinfo() instead of gethostbyname() to support IPv6 * Additional support for Samsung MLC flash drives ------------------------------------------------------------------- Tue Feb 9 18:40:31 CET 2010 - sbrabec@suse.cz - Changed daemon start policy from "force yes" to "default start" (bnc#567416). ------------------------------------------------------------------- Mon Aug 10 19:07:54 CEST 2009 - sbrabec@suse.cz - Updated to the latest SVN snapshot: * More drives recognized: Fujitsu MHW2 BJ series, WD Caviar Black family, Western Digital AV-GP series, Transcend Solid-State Drive and Transcend Solid-State Drive V series, Seagate Momentus 5400.5 series. * Fix data type bug in checksum test for multi sector logs. * Add USB ID of Seagate FreeAgent Go. * Add experimental feature to log attribute values at each check cycle (ATA only). * Heads up about a non backwardly compatible change introduced in draft SAT-2 (sat2r8b.pdf) that will break our existing SAT processing code. Action needed if change stands. * smartctl: Don't report an attribute as failed if threshold is 0. * Print only one warning on checksum errors in multi sector log. * Require to specify PORT parameter of '-d usbjmicron' if two disks are connected. * smartctl: Limit default number of printed entries for '-l xerror' to 8, for '-l xselftest' to 25. * smartctl: Fix number of entries in '-l xselftest' output. * Add USB IDs of a SunplusIT bridge, three WD drives, and an unsupported Iomega drive. * smartd: Add '!' flag to '-r' and '-R' directives. If specified, message is logged as LOG_CRIT and warning mail is sent if attribute normalized or raw value changes. * Add names for some attributes used in Samsung MLC drives: 178-180 & 183 * smartctl: Add option '-x, --xall' to print all info including extended SMART logs and non-SMART info. * smartctl: Add '-l xerror,error' and '-l xselftest,selftest' to print the old logs if the extended logs are not supported. * Disable 48-bit ATA commands for JMicron USB bridges by default. * smartd: Don't ignore the '-n' directive when a self-test is scheduled. * SCSI (SAS): implement '-l sasphy,reset'. * SCSI (SAS): add '-l sasphy' and '-l sasphy,reset' into smartctl. * Print General Purpose Logs even if GPL feature bit is missing. ------------------------------------------------------------------- Sat Jul 18 20:22:38 CEST 2009 - dominique-obs@leuenberger.net - bootstrap with automake-1.11 ------------------------------------------------------------------- Wed Jun 3 19:19:55 CEST 2009 - sbrabec@suse.cz - Updated to the latest CVS snapshot: * SCSI: Fetch load-unload cycle counts * smartd: Fix '-M test' directive in conjunction with '-s' * knowndrives updates * Add '+' modifier to smartd '-C' and '-U' directives * Add experimental option '-d usbsunplus' for drives behind SunplusIT USB bridges. * Add smartctl '-d test' option * Add experimental USB device type autodetection * Add new SMART STATUS check command for JMicron USB bridges * Add smartctl option '-l xerror[,NUM]' * Accept half healthy (and half unhealthy) indication from the SMART RETURN STATUS. * Workaround for huge raw values of Reallocated_Sector_Ct and Reallocated_Event_Ct for newer Fujitsu disks. ------------------------------------------------------------------- Wed Feb 11 17:01:58 CET 2009 - sbrabec@suse.cz - Enabled selinux support only for supported platforms. - Removed support for SLE9 (no more compilable). ------------------------------------------------------------------- Thu Nov 27 14:35:11 CET 2008 - sbrabec@suse.cz - smartd_opts migrated to sysconfig (bnc#448205). ------------------------------------------------------------------- Fri Oct 24 18:12:18 CEST 2008 - sbrabec@suse.cz - Updated to the latest CVS snapshot: * DEVICESCAN works again with SATA (bnc#436567) * knowndrives updates, now using full regexps * support for local drive database entries from optional file * support for scheduled self tests * smartd persistent state and delayed test scheduling support * support for disks behind MegaRAID controllers * Improve min/max temperature recording in conjunction with '-s'. * new options to -l * code cleanup and other fixes - Init script updated to support "unused" state (bnc#436567). - Added "rescan" to the init script to force rescanning of devices. - Enabled selinux support to create /dev/tw[ae] with correct contexts. ------------------------------------------------------------------- Tue Sep 2 14:44:40 CEST 2008 - sbrabec@suse.cz - Desktop neutral powersave-notify is no longer available. Use "wall" to report expected disc failures. ------------------------------------------------------------------- Mon Aug 18 17:26:44 CEST 2008 - sbrabec@suse.cz - Updated to the latest CVS snapshot: * Areca device support. * More discs recognized. * Code improvements to simplify adding new platforms and devices. ------------------------------------------------------------------- Fri May 23 14:06:32 CEST 2008 - sbrabec@suse.cz - Updated to the latest CVS snapshot: * USB Cypress device support in smartd (bnc#387094). - Fixed help strings regarding the USB Cypress support. - Do not report errors after disconnecting of removable discs (bnc#308557). ------------------------------------------------------------------- Tue May 6 12:43:16 CEST 2008 - sbrabec@suse.cz - Updated to the latest CVS snapshot (bnc#387094): * USB Cypress device support. * 3ware support improvements. ------------------------------------------------------------------- Mon Mar 10 12:42:15 CET 2008 - sbrabec@suse.cz - Updated to version 5.38: * smartd.initd.in addition * On Linux, DEVICESCAN now automatically recognizes SATA devices behind libata, and SATA devices behind the Marvell driver. * On Linux, a '-d sat' or '-d marvell' is automatically added if libata or the marvell driver are recognized behind a SCSI device type * SAT device type + SCSI generic devices work properly with smartd under Linux * Many additions to drive database * Some ATA-8 updates * Dragonfly support * Fixed some ATA identity byte swap problems on big endian CPUs * No-fork option added to smartd * 3ware support for controllers with more disks (32 max) * Improved SMART Attribute list and descriptions * Fix to smartctl return codes * Fix to scheduled tests on Highpoint RAID controllers * New samsung firmware bug workaround option * Auto-offline and Auto-save fixed in Linux + libata * Solaris: better SCSI support * Fixed and improvements to CCISS support * More options for SCSI temperature monitoring and history * Additional command line options for selective self-tests * Compilation fixes for various platforms. ------------------------------------------------------------------- Tue Oct 9 11:46:01 CEST 2007 - sbrabec@suse.cz - Updated to the CVS version (#326738): * Supports SAS discs behind CCISS RAID. - Removed bogus patch breaking HighPoint RAID (#225639). ------------------------------------------------------------------- Wed Aug 22 13:14:42 CEST 2007 - sbrabec@suse.cz - Worked around missing %restart_on_update in older versions. - Build correctly in older SuSE versions. ------------------------------------------------------------------- Tue Jul 24 18:34:34 CEST 2007 - sbrabec@suse.cz - Updated to version 5.37: * Rely on general SAT code instead of Linux specific. * Increased max line length 128 to 256 characters. * Added new items into drive database. * Fixed inclusion of PRI?64 macros from inttypes.h. * Fix selective self test log revision number. * Compile fix for SuSE. - Really start smartd by default on new enough kernels (#201715). - Fixed behavior for SATA discs (#225639). ------------------------------------------------------------------- Mon Mar 5 11:54:35 CET 2007 - pgajdos@suse.cz - fixed 'array subscript is above array bounds' (#239956) ------------------------------------------------------------------- Mon Jan 22 10:33:05 CET 2007 - ssommer@suse.de - fix build for automake-0.9b ------------------------------------------------------------------- Thu Jan 18 15:09:45 CET 2007 - ssommer@suse.de - support building with automake-1.10 ------------------------------------------------------------------- Wed Oct 25 12:11:17 CEST 2006 - sbrabec@suse.cz - Updated to the today CVS version: * Supports SATA devices scanning out of the box (#201715#c9). * Supports SATA devices behind SCSI ATA Translation layer. * Supports SATA drives behind HighPoint Raid controllers. * Supports HP SmartArray RAID controller (cciss) (#186013). - Updated SATA support stuff. - Start smartd by default on new enough kernels (#201715). ------------------------------------------------------------------- Wed Sep 13 17:56:12 CEST 2006 - sbrabec@suse.cz - Integrated with powersave. - Use upstream init script. ------------------------------------------------------------------- Thu Sep 7 17:24:49 CEST 2006 - sbrabec@suse.cz - Updated to version 5.36: * Additions to the table of known drives. * Works 'out of the box' with Linux SATA libata. * smartd option added to list test schedules. * smartctl option added to list part of drive database. * Various improvements for SCSI disks and logs. * Printing of drive family info. * SCSI disks: output size of grown defect list. * Added info about drive family to 'smartctl -i' output. * Added option ',q' for smartd '-n' directive to suppress 'skipping checks' message which may spin up laptop disk. * Added message if smartd '-n' check power mode spins up disk. ------------------------------------------------------------------- Wed Jan 25 21:41:41 CET 2006 - mls@suse.de - converted neededforbuild to BuildRequires ------------------------------------------------------------------- Tue Jun 21 01:17:39 CEST 2005 - ro@suse.de - use RPM_OPT_FLAGS - build with fPIE/pie ------------------------------------------------------------------- Fri Mar 18 14:49:58 CET 2005 - sbrabec@suse.cz - Additional information on SATA support. ------------------------------------------------------------------- Tue Feb 22 14:18:47 CET 2005 - sbrabec@suse.cz - Added comments on temperature data in smartd.conf (#50156). ------------------------------------------------------------------- Mon Jan 24 16:30:15 CET 2005 - sbrabec@suse.cz - Updated to version 5.33. ------------------------------------------------------------------- Mon Jan 03 15:14:31 CET 2005 - sbrabec@suse.cz - Fixed missing pid reference in init script (#49546). - Updated README.SATA. ------------------------------------------------------------------- Fri Aug 27 15:25:36 CEST 2004 - sbrabec@suse.cz - Updated to version 5.32. ------------------------------------------------------------------- Sun Jun 6 13:23:35 CEST 2004 - lmuelle@suse.de - Update to version 5.31. - Add stop_on_removal to preun and restart_on_update to postun. ------------------------------------------------------------------- Sun Apr 25 16:40:02 CEST 2004 - lmuelle@suse.de - Add reload and condrestart to init script; [#39425]. ------------------------------------------------------------------- Mon Mar 08 11:46:56 CET 2004 - sbrabec@suse.cz - Updated to version 5.30. ------------------------------------------------------------------- Fri Mar 05 17:26:02 CET 2004 - sbrabec@suse.cz - Added README.SATA. - Added %build section. ------------------------------------------------------------------- Tue Mar 02 11:09:18 CET 2004 - sbrabec@suse.cz - Updated to version 5.29. ------------------------------------------------------------------- Mon Jan 12 10:50:27 CET 2004 - adrian@suse.de - build as user ------------------------------------------------------------------- Fri Jan 9 20:11:08 CET 2004 - mmj@suse.de - Updated to version 5.26 ------------------------------------------------------------------- Fri Aug 22 13:20:40 CEST 2003 - sbrabec@suse.cz - Updated to version 5.1-18. ------------------------------------------------------------------- Thu Aug 21 17:14:08 CEST 2003 - sbrabec@suse.cz - Updated to version 5.1-17. ------------------------------------------------------------------- Mon Aug 11 09:53:05 CEST 2003 - sbrabec@suse.cz - Added $sendmail to X-UnitedLinux-Should-Start. ------------------------------------------------------------------- Thu Aug 07 14:45:17 CEST 2003 - sbrabec@suse.cz - Updated to version 5.1.16. ------------------------------------------------------------------- Wed May 21 11:59:42 CEST 2003 - sbrabec@suse.cz - Updated to version 5.1.9. - Fixed RPM file attributes. ------------------------------------------------------------------- Wed Mar 26 12:33:38 CET 2003 - sbrabec@suse.cz - Updated to version 5.1.9. ------------------------------------------------------------------- Mon Jan 27 11:08:57 CET 2003 - sbrabec@suse.cz - Updated to version 5.1.4. ------------------------------------------------------------------- Mon Jan 13 16:06:59 CET 2003 - sbrabec@suse.cz - Updated to version 5.1.1. ------------------------------------------------------------------- Tue Dec 10 18:11:21 CET 2002 - sbrabec@suse.cz - Updated to version 5.0.49. ------------------------------------------------------------------- Mon Nov 25 14:01:29 CET 2002 - sbrabec@suse.cz - Fixed SuSE specific things in docs and manual pages. ------------------------------------------------------------------- Mon Nov 18 12:02:24 CET 2002 - sbrabec@suse.cz - New package.
Locations
Projects
Search
Status Monitor
Help
OpenBuildService.org
Documentation
API Documentation
Code of Conduct
Contact
Support
@OBShq
Terms
openSUSE Build Service is sponsored by
The Open Build Service is an
openSUSE project
.
Sign Up
Log In
Places
Places
All Projects
Status Monitor
