File xsa297-0c.patch of Package xen.11319

Overview Repositories Revisions Requests Users Attributes Meta

File xsa297-0c.patch of Package xen.11319

x86/boot: Detect the firmware SMT setting correctly on Intel hardware

While boot_cpu_data.x86_num_siblings is an accurate value to use on AMD
hardware, it isn't on Intel when the user has disabled Hyperthreading in the
firmware.  As a result, a user which has chosen to disable HT still gets
nagged on L1TF-vulnerable hardware when they haven't chosen an explicit
smt=<bool> setting.

Make use of the largely-undocumented MSR_INTEL_CORE_THREAD_COUNT which in
practice exists since Nehalem, when booting on real hardware.  Fall back to
using the ACPI table APIC IDs.

While adjusting this logic, fix a latent bug in amd_get_topology().  The
thread count field in CPUID.0x8000001e.ebx is documented as 8 bits wide,
rather than 2 bits wide.

Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Jan Beulich <jbeulich@suse.com>

--- a/xen/arch/x86/cpu/amd.c
+++ b/xen/arch/x86/cpu/amd.c
@@ -399,7 +399,7 @@ static void __devinit amd_get_topology(s
                 u32 eax, ebx, ecx, edx;
 
                 cpuid(0x8000001e, &eax, &ebx, &ecx, &edx);
-                c->x86_num_siblings = ((ebx >> 8) & 0x3) + 1;
+                c->x86_num_siblings = ((ebx >> 8) & 0xff) + 1;
 
                 if (c->x86 < 0x17)
                         c->compute_unit_id = ebx & 0xFF;
--- a/xen/arch/x86/spec_ctrl.c
+++ b/xen/arch/x86/spec_ctrl.c
@@ -355,6 +355,45 @@ static void __init print_details(enum in
            opt_pv_l1tf_domu  ? "enabled"  : "disabled");
 }
 
+static bool_t __init check_smt_enabled(void)
+{
+    uint64_t val;
+    unsigned int cpu;
+
+    /*
+     * x86_num_siblings defaults to 1 in the absence of other information, and
+     * is adjusted based on other topology information found in CPUID leaves.
+     *
+     * On AMD hardware, it will be the current SMT configuration.  On Intel
+     * hardware, it will represent the maximum capability, rather than the
+     * current configuration.
+     */
+    if ( boot_cpu_data.x86_num_siblings < 2 )
+        return 0;
+
+    /*
+     * Intel Nehalem and later hardware does have an MSR which reports the
+     * current count of cores/threads in the package.
+     *
+     * At the time of writing, it is almost completely undocumented, so isn't
+     * virtualised reliably.
+     */
+    if ( boot_cpu_data.x86_vendor == X86_VENDOR_INTEL && !cpu_has_hypervisor &&
+         !rdmsr_safe(MSR_INTEL_CORE_THREAD_COUNT, val) )
+        return (MASK_EXTR(val, MSR_CTC_CORE_MASK) !=
+                MASK_EXTR(val, MSR_CTC_THREAD_MASK));
+
+    /*
+     * Search over the CPUs reported in the ACPI tables.  Any whose APIC ID
+     * has a non-zero thread id component indicates that SMT is active.
+     */
+    for_each_present_cpu ( cpu )
+        if ( x86_cpu_to_apicid[cpu] & (boot_cpu_data.x86_num_siblings - 1) )
+            return 1;
+
+    return 0;
+}
+
 /* Calculate whether this CPU speculates past #NM */
 static bool_t __init should_use_eager_fpu(void)
 {
@@ -581,7 +620,7 @@ static __init void l1tf_calculations(uin
 void __init init_speculation_mitigations(void)
 {
     enum ind_thunk thunk = THUNK_DEFAULT;
-    bool_t ibrs;
+    bool_t ibrs, hw_smt_enabled;
     uint64_t caps = 0;
 
     if ( boot_cpu_has(X86_FEATURE_ARCH_CAPS) )
@@ -592,6 +631,8 @@ void __init init_speculation_mitigations
     else
         ibrs = !!boot_cpu_has(X86_FEATURE_IBRSB);
 
+    hw_smt_enabled = check_smt_enabled();
+
     /*
      * Supplimentary minor adjustments.  Without compiler support, there are
      * no thunks.
@@ -684,8 +725,7 @@ void __init init_speculation_mitigations
      * However, if we are on affected hardware, with HT enabled, and the user
      * hasn't explicitly chosen whether to use HT or not, nag them to do so.
      */
-    if ( opt_smt == -1 && cpu_has_bug_l1tf &&
-         boot_cpu_data.x86_num_siblings > 1 )
+    if ( opt_smt == -1 && cpu_has_bug_l1tf && hw_smt_enabled )
         printk("**************************************************************\n"
                "* Booted on L1TF-vulnerable hardware with SMT/Hyperthreading *\n"
                "* enabled.  Please assess your configuration and choose an   *\n"

Places

File xsa297-0c.patch of Package xen.11319

Places