Sign Up
Log In
Log In
or
Sign Up
Places
All Projects
Status Monitor
Collapse sidebar
SUSE:SLE-15-SP1:GA
rp-pppoe.28316
rp-pppoe-dont-ifconfig.patch
Overview
Repositories
Revisions
Requests
Users
Attributes
Meta
File rp-pppoe-dont-ifconfig.patch of Package rp-pppoe.28316
Index: rp-pppoe-3.12/doc/HOW-TO-CONNECT =================================================================== --- rp-pppoe-3.12.orig/doc/HOW-TO-CONNECT 2015-11-11 16:10:00.000000000 +0100 +++ rp-pppoe-3.12/doc/HOW-TO-CONNECT 2022-01-20 11:38:35.900602615 +0100 @@ -21,14 +21,15 @@ visible to the Linux kernel. Just how t of this document. However, if the card is the only Ethernet card in the system, executing: - ifconfig eth0 + ip link show eth0 should display something like this: - eth0 Link encap:Ethernet HWaddr 00:60:67:62:31:D4 + 2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast qlen 1000 + link/ether fc:aa:15:39:a7:b3 brd ff:ff:ff:ff:ff:ff -plust some more lines. Your HWaddr will be different. As long as you see -the HWaddr line, your card should be working. +Your second line will most definately be different. As long as you see +the link/ether line, your card should be working. DO NOT assign an IP address to the Ethernet card. DO NOT configure the card to come up at boot time. @@ -119,8 +120,8 @@ hosts to the LAN, but consumes some extr If you want to manually configure the LAN hosts, here's how: -In Linux, use: "ifconfig eth0 mtu 1452". For best results, put this -in an /etc/rc.d/rc.local script. +In Linux, use: "ip link set eth0 mtu 1452". For best results, put +this in an /etc/rc.d/rc.local script. For Windows, machines, see http://lan.cns.ksu.edu/OS/WIN95/slip95.htm. Set the MaxMTU to 1452. @@ -134,8 +135,8 @@ As root, bring down the link by typing: That's it! -- -Dianne Skoll <dfs@roaringpenguin.com> | Roaring Penguin Software Inc. -http://www.roaringpenguin.com | +Dianne Skoll <dianne@skoll.ca> +https://dianne.skoll.ca/projects/rp-pppoe/ | PROBLEMS! DIANNE, IT DOESN'T WORK! --------------------------------- @@ -145,11 +146,13 @@ Here are some problems PPPoE users have ----------------------------------------------------------------------------- A) Can't see the Ethernet interface -Well, I can't really help you here. To use these instructions, you must -have Linux working to the point where it recognizes your Ethernet card. -If you type "ifconfig ethx" and you get back a HWAddr value, your Ethernet -card is probably OK. But I really can't help with hardware configuration -issues. +Well, I can't really help you here. To use these instructions, you +must have Linux working to the point where it recognizes your Ethernet +card. If you type "ip link show ethx" and you get back a hardware +address value in the line that begins with link/ether, your Ethernet +card is probably OK. But I really can't help with hardware +configuration issues. + ----------------------------------------------------------------------------- B) Connection seems to come up, but I can't browse the web or ping anything @@ -224,9 +227,10 @@ problem, give the Ethernet card connecte address. For example, if eth0 is your internal LAN card and eth1 goes to the DSL modem, do something like this: - ifconfig eth1 10.0.0.1 netmask 255.255.255.0 + ip link set eth1 10.0.0.1/24 + +(You may have to choose a different IP address and prefix; experiment.) -(You may have to choose a different IP address; experiment.) ----------------------------------------------------------------------------- K) How can I run a script every time I connect and get a new IP address? @@ -262,7 +266,7 @@ Make sure no entries in the routing tabl connected to the DSL modem. You might want to add these lines in pppoe-connect: - ifconfig ethx down - ifconfig ethx up mtu 1500 + ip link set ethx down + ip link set ethx up mtu 1500 which should reset things to sane values. Index: rp-pppoe-3.12/gui/tkpppoe.in =================================================================== --- rp-pppoe-3.12.orig/gui/tkpppoe.in 2015-11-11 16:09:58.000000000 +0100 +++ rp-pppoe-3.12/gui/tkpppoe.in 2022-01-20 11:37:25.936150975 +0100 @@ -1573,9 +1573,9 @@ proc SetButtonStates {} { #*********************************************************************** proc GetEthernetInterfaces {} { set ifs {} - set fp [open "|/sbin/ifconfig" "r"] + set fp [open "|@IP@ -o link show" "r"] while {[gets $fp line] >= 0} { - if {[regexp {^eth[0-9]+} $line eth]} { + if {[regexp {eth[0-9]+} $line eth]} { lappend ifs $eth } } Index: rp-pppoe-3.12/man/pppoe-sniff.8 =================================================================== --- rp-pppoe-3.12.orig/man/pppoe-sniff.8 2015-11-11 16:10:01.000000000 +0100 +++ rp-pppoe-3.12/man/pppoe-sniff.8 2022-01-20 11:37:25.936150975 +0100 @@ -31,7 +31,7 @@ and start \fBpppoe-sniff\fR. If the eth for example, type these commands: .nf - ifconfig eth0 promisc + ip link set eth0 promisc on pppoe-sniff -I eth0 .fi @@ -48,7 +48,7 @@ After \fBpppoe-sniff\fR finishes (or you remember to turn off promiscuous mode: .nf - ifconfig eth0 -promisc + ip link set eth0 promisc on .fi .SH OPTIONS Index: rp-pppoe-3.12/scripts/pppoe-connect.in =================================================================== --- rp-pppoe-3.12.orig/scripts/pppoe-connect.in 2022-01-20 11:37:25.904150768 +0100 +++ rp-pppoe-3.12/scripts/pppoe-connect.in 2022-01-20 11:37:25.936150975 +0100 @@ -28,6 +28,7 @@ exec_prefix=@exec_prefix@ localstatedir=/var # Paths to programs +IP=@IP@ IFCONFIG=/sbin/ifconfig PPPD=@PPPD@ SETSID=@SETSID@ @@ -115,11 +116,7 @@ fi # fails on some *BSD's, so we'll only do it under Linux if test `uname -s` = Linux ; then - $IFCONFIG $ETH up - EXISTING_MTU=`$IFCONFIG $ETH 2> /dev/null | grep MTU: | sed -e 's/.*MTU://' | sed -e 's/[^0-9].*//'` - if test "$EXISTING_MTU" = "" -o "$EXISTING_MTU" -lt 1500 ; then - $IFCONFIG $ETH mtu 1500 - fi + $IP link set $ETH up mtu 1500 # For 2.4 kernels. Will fail on 2.2.x, but who cares? modprobe ppp_generic > /dev/null 2>&1 @@ -129,12 +126,14 @@ if test `uname -s` = Linux ; then modprobe pppox > /dev/null 2>&1 modprobe pppoe > /dev/null 2>&1 fi +else + $IFCONFIG $ETH up fi if test "$SYNCHRONOUS" = "yes" ; then PPPOE_SYNC=-s PPPD_SYNC=sync - # Increase the chances of it working on Linux... + # Increase the chances of it working on Linux... if test `uname -s` = Linux ; then modprobe n_hdlc > /dev/null 2>&1 fi Index: rp-pppoe-3.12/scripts/pppoe-setup.in =================================================================== --- rp-pppoe-3.12.orig/scripts/pppoe-setup.in 2022-01-20 11:37:25.884150639 +0100 +++ rp-pppoe-3.12/scripts/pppoe-setup.in 2022-01-20 11:37:25.936150975 +0100 @@ -18,6 +18,7 @@ exec_prefix=@exec_prefix@ # Paths to programs IFCONFIG=/sbin/ifconfig +IP=@IP@ PPPD=@PPPD@ PPPOE=@sbindir@/pppoe ECHO=@ECHO@ @@ -94,6 +95,8 @@ while [ true ] ; do # Under Linux, "fix" the default interface if eth1 is not available if test `uname -s` = "Linux" ; then + $IP link show $ETH > /dev/null 2>&1 || ETH=eth0 + else $IFCONFIG $ETH > /dev/null 2>&1 || ETH=eth0 fi $ECHO "" Index: rp-pppoe-3.12/scripts/pppoe-start.in =================================================================== --- rp-pppoe-3.12.orig/scripts/pppoe-start.in 2022-01-20 11:37:25.936150975 +0100 +++ rp-pppoe-3.12/scripts/pppoe-start.in 2022-01-20 11:43:52.006643088 +0100 @@ -29,7 +29,7 @@ exec_prefix=@exec_prefix@ # Paths to programs CONNECT=@sbindir@/pppoe-connect ECHO=@ECHO@ -IFCONFIG=/sbin/ifconfig +IP=@IP@ # Set to "C" locale so we can parse messages from commands LANG=C @@ -69,8 +69,8 @@ if [ "$DEBUG" = "1" ] ; then $ECHO "* interfaces. The one you chose for PPPoE should contain the words:" >> $DEBUG $ECHO "* 'UP' and 'RUNNING'. If it does not, you probably have an Ethernet" >> $DEBUG $ECHO "* driver problem." >> $DEBUG - $ECHO "Output of ifconfig -a" >> $DEBUG - $IFCONFIG -a >> $DEBUG + $ECHO "Output of ip link show" >> $DEBUG + $IP link show >> $DEBUG $ECHO "---------------------------------------------" >> $DEBUG if [ "`uname -s`" = "Linux" ] ; then $ECHO "* The following section contains information about kernel modules" >> $DEBUG @@ -85,8 +85,8 @@ if [ "$DEBUG" = "1" ] ; then $ECHO "* have defined a default route and gateway, and pppd will" >> $DEBUG $ECHO "* not create a default route using your ISP. Try getting" >> $DEBUG $ECHO "* rid of this route." >> $DEBUG - $ECHO "Output of netstat -n -r" >> $DEBUG - netstat -n -r >> $DEBUG + $ECHO "Output of ip route" >> $DEBUG + $IP route >> $DEBUG $ECHO "---------------------------------------------" >> $DEBUG $ECHO "Contents of /etc/resolv.conf" >> $DEBUG $ECHO "* The following section lists DNS setup." >> $DEBUG Index: rp-pppoe-3.12/scripts/pppoe-status =================================================================== --- rp-pppoe-3.12.orig/scripts/pppoe-status 2015-11-11 16:10:02.000000000 +0100 +++ rp-pppoe-3.12/scripts/pppoe-status 2022-01-20 11:37:25.936150975 +0100 @@ -21,6 +21,7 @@ # Defaults CONFIG=/etc/ppp/pppoe.conf +PATH=/bin:/usr/bin:/sbin:/usr/sbin:$PATH IP=`which ip` case "$#" in 1) @@ -66,14 +67,13 @@ for i in /etc/ppp/ppp*.pid /var/run/ppp* PID=`cat $i` if [ "$PID" = "$PPPD_PID" ] ; then IF=`basename $i .pid` - netstat -rn | grep " ${IF}\$" > /dev/null - # /sbin/ifconfig $IF | grep "UP.*POINTOPOINT" > /dev/null + $IP route | grep "dev ${IF}" > /dev/null if [ "$?" != "0" ] ; then echo "pppoe-status: Link is attached to $IF, but $IF is down" exit 1 fi echo "pppoe-status: Link is up and running on interface $IF" - /sbin/ifconfig $IF + $IP link show $IF exit 0 fi fi Index: rp-pppoe-3.12/src/configure =================================================================== --- rp-pppoe-3.12.orig/src/configure 2015-11-11 16:10:03.000000000 +0100 +++ rp-pppoe-3.12/src/configure 2022-01-20 11:37:25.936150975 +0100 @@ -636,6 +636,7 @@ ID SETSID ECHO PPPD +IP INSTALL_DATA INSTALL_SCRIPT INSTALL_PROGRAM @@ -3966,7 +3967,7 @@ if test "$ac_cv_pluginpath" = "yes" ; th fi if test "$ac_cv_pluginpath" = "yes" ; then - echo "*** Could not fined pppd/pppd.h anywhere... not building plugin" + echo "*** Could not find pppd/pppd.h anywhere... not building plugin" ac_cv_pluginpath=no fi @@ -4364,6 +4365,49 @@ _ACEOF +# Extract the first word of "ip", so it can be a program name with args. +set dummy ip; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_path_IP+:} false; then : + $as_echo_n "(cached) " >&6 +else + case $IP in + [\\/]* | ?:[\\/]*) + ac_cv_path_IP="$IP" # Let the user override the test with a path. + ;; + *) + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +as_dummy="$PATH:/bin:/sbin:/usr/bin:/usr/sbin" +for as_dir in $as_dummy +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_path_IP="$as_dir/$ac_word$ac_exec_ext" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + + test -z "$ac_cv_path_IP" && ac_cv_path_IP="NOTFOUND" + ;; +esac +fi +IP=$ac_cv_path_IP +if test -n "$IP"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $IP" >&5 +$as_echo "$IP" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + + # Extract the first word of "pppd", so it can be a program name with args. set dummy pppd; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 Index: rp-pppoe-3.12/src/configure.in =================================================================== --- rp-pppoe-3.12.orig/src/configure.in 2015-11-11 16:10:03.000000000 +0100 +++ rp-pppoe-3.12/src/configure.in 2022-01-20 11:37:25.936150975 +0100 @@ -142,6 +142,9 @@ AC_CHECK_SIZEOF(unsigned short) AC_CHECK_SIZEOF(unsigned int) AC_CHECK_SIZEOF(unsigned long) +dnl Check for location of ip +AC_PATH_PROG(IP, ip, NOTFOUND, $PATH:/bin:/sbin:/usr/bin:/usr/sbin) + dnl Check for location of pppd AC_PATH_PROG(PPPD, pppd, NOTFOUND, $PATH:/sbin:/usr/sbin:/usr/local/sbin) AC_PATH_PROG(ECHO, echo, echo) Index: rp-pppoe-3.12/src/pppoe.c =================================================================== --- rp-pppoe-3.12.orig/src/pppoe.c 2015-11-11 16:10:04.000000000 +0100 +++ rp-pppoe-3.12/src/pppoe.c 2022-01-20 11:37:25.936150975 +0100 @@ -669,10 +669,10 @@ main(int argc, char *argv[]) exit(EXIT_SUCCESS); } - /* Set signal handlers: send PADT on HUP; ignore TERM and INT */ - signal(SIGTERM, SIG_IGN); - signal(SIGINT, SIG_IGN); - signal(SIGHUP, sigPADT); + /* Set signal handlers: send PADT on HUP, TERM and INT */ + signal(SIGTERM, sigPADT); + signal(SIGINT, sigPADT); + signal(SIGHUP, sigPADT); session(&conn); return 0; }
Locations
Projects
Search
Status Monitor
Help
OpenBuildService.org
Documentation
API Documentation
Code of Conduct
Contact
Support
@OBShq
Terms
openSUSE Build Service is sponsored by
The Open Build Service is an
openSUSE project
.
Sign Up
Log In
Places
Places
All Projects
Status Monitor
