File gdb-python-finishbreakpoint-update.patch of Package gdb

Overview Repositories Revisions Requests Users Attributes Meta

File gdb-python-finishbreakpoint-update.patch of Package gdb (Revision 2ff30aa5256a5b3795b609f70bf269e9)

Currently displaying revision 2ff30aa5256a5b3795b609f70bf269e9 , Show latest

[gdb/python] FinishBreakPoint update

Consider the python gdb.FinishBreakpoint class, an extension of the
gdb.Breakpoint class.

It sets a temporary breakpoint on the return address of a frame.

This type of breakpoints is thread-specific.

II.

If the FinishBreakpoint is hit, it is deleted, and the method return_value
can be used to get the value returned by the function.

Let's demonstrate this:
...
$ cat -n test.c
     1  int foo (int a) { return a + 2; }
     2  int main () { return foo (1); }
$ gcc -g test.c
$ gdb -q -batch a.out -ex "set trace-commands on" -ex "tbreak foo" -ex run \
  -ex "python bp = gdb.FinishBreakpoint()" -ex "info breakpoints" \
  -ex continue -ex "info breakpoints" -ex "python print (bp.return_value)"
+tbreak foo
Temporary breakpoint 1 at 0x40049e: file test.c, line 1.
+run

Temporary breakpoint 1, foo (a=1) at test.c:1
1       int foo (int a) { return a + 2; }
+python bp = gdb.FinishBreakpoint()
Temporary breakpoint 2 at 0x4004b4: file test.c, line 2.
+info breakpoints
Num     Type           Disp Enb Address    What
2       breakpoint     del  y   0x004004b4 in main at test.c:2 thread 1
        stop only in thread 1
+continue

Temporary breakpoint 2, 0x004004b4 in main () at test.c:2
2       int main () { return foo (1); }
+info breakpoints
No breakpoints or watchpoints.
+python print (bp.return_value)
3
...

III.

Another possibility is that the FinishBreakpoint is not hit, because the
function did not terminate, f.i. because of longjmp, C++ exceptions, or GDB
return command.

Let's demonstrate this, using C++ exceptions:
...
$ cat -n test.c
     1  int foo (int a) { throw 1; return a + 2; }
     2  int main () {
     3    try { return foo (1); } catch (...) {};
     4    return 1;
     5  }
$ g++ -g test.c
$ gdb -q -batch a.out -ex "set trace-commands on" -ex "tbreak foo" -ex run \
  -ex "python bp = gdb.FinishBreakpoint()" -ex "info breakpoints" \
  -ex continue -ex "info breakpoints" -ex "python print (bp.return_value)"
+tbreak foo
Temporary breakpoint 1 at 0x400712: file test.c, line 1.
+run

Temporary breakpoint 1, foo (a=1) at test.c:1
1       int foo (int a) { throw 1; return a + 2; }
+python bp = gdb.FinishBreakpoint()
Temporary breakpoint 2 at 0x400742: file test.c, line 3.
+info breakpoints
Num     Type           Disp Enb Address    What
2       breakpoint     del  y   0x00400742 in main() at test.c:3 thread 1
        stop only in thread 1
+continue
[Inferior 1 (process 25269) exited with code 01]
Thread-specific breakpoint 2 deleted - thread 1 no longer in the thread list.
+info breakpoints
No breakpoints or watchpoints.
+python print (bp.return_value)
None
...

Indeed, we do not hit the FinishBreakpoint.  Instead, it's deleted when the
thread disappears, like any other thread-specific breakpoint.

I think this is a bug: the deletion is meant to be handled by FinishBreakpoint
itself.

IV.

Fix aforementioned bug by:
- adding an observer of the thread_exit event in FinishBreakpoint
- making sure that this observer is called before the
  remove_threaded_breakpoints observer of that same event.

This changes the behaviour to:
...
+continue
[Inferior 1 (process 30256) exited with code 01]
+info breakpoints
No breakpoints or watchpoints.
+python print (bp.return_value)
None
...

An out_of_scope callback can be defined to make this more verbose:
...
$ cat fbp.py
class FBP(gdb.FinishBreakpoint):
    def __init__(self):
        gdb.FinishBreakpoint.__init__(self)

def out_of_scope(self):
        try:
            frame = gdb.selected_frame ()
            sal = frame.find_sal ()
            print ("out_of_scope triggered at %s:%s"
                   % (sal.symtab.fullname(), sal.line))
        except gdb.error as e:
            print ("out_of_scope triggered at thread/inferior exit")
...
and using that gets us:
...
+continue
[Inferior 1 (process 30742) exited with code 01]
out_of_scope triggered at thread/inferior exit
+info breakpoints
No breakpoints or watchpoints.
+python print (bp.return_value)
None
...

VI.

This out_of_scope event can be triggered earlier than inferior/thread exit.

Let's demonstrate this:
...
$ cat -n test.c
     1  int bar (int a) { throw 1; return a + 2; }
     2  int foo (int a) {
     3    int res = a;
     4    try
     5      {
     6        res += bar (1);
     7      }
     8    catch (...)
     9      {
    10      }
    11    return res;
    12  }
    13  int main () {
    14    int res = 0;
    15    res += foo (1);
    16    res += 2;
    17    return res * 2;
    18  }
$ g++ -g test.c
$ gdb -q -batch -ex "source fbp.py" a.out -ex "set trace-commands on" \
  -ex "tbreak bar" -ex run -ex "python bp = FBP()" -ex "info breakpoints" \
  -ex "tbreak 16" -ex continue -ex "info breakpoints" \
  -ex "python print (bp.return_value)"
+tbreak bar
Temporary breakpoint 1 at 0x400712: file test.c, line 1.
+run

Temporary breakpoint 1, bar (a=1) at test.c:1
1       int bar (int a) { throw 1; return a + 2; }
+python bp = FBP()
Temporary breakpoint 2 at 0x40074f: file test.c, line 6.
+info breakpoints
Num     Type           Disp Enb Address    What
2       breakpoint     del  y   0x0040074f in foo(int) at test.c:6 thread 1
        stop only in thread 1
+tbreak 16
Temporary breakpoint 3 at 0x400784: file test.c, line 16.
+continue

Temporary breakpoint 3, main () at test.c:16
16        res += 2;
out_of_scope triggered at /home/vries/gdb_versions/devel/test.c:16
+info breakpoints
No breakpoints or watchpoints.
+python print (bp.return_value)
None
...

Note that the out_of_scope event triggers at the breakpoint we set at
test.c:16.  If we'd set that breakpoint at line 17, the out_of_scope event
would trigger at line 17 instead.

Also note that it can't be triggered earlier, say by setting the breakpoint in
foo at line 11.  We would get instead "out_of_scope triggered at
thread/inferior exit".

VII.

Now consider a reduced version of
src/gdb/testsuite/gdb.python/py-finish-breakpoint2.cc:
...
$ cat -n test.c
     1  #include <iostream>
     2
     3  void
     4  throw_exception_1 (int e)
     5  {
     6    throw new int (e);
     7  }
     8
     9  int
    10  main (void)
    11  {
    12    int i;
    13    try
    14      {
    15        throw_exception_1 (10);
    16      }
    17    catch (const int *e)
    18      {
    19          std::cerr << "Exception #" << *e << std::endl;
    20      }
    21    i += 1;
    22
    23    return i;
    24  }
$ g++ -g test.c
...

Now let's try to see if the FinishBreakPoint triggers:
...
$ gdb -q -batch -ex "source fbp.py" a.out -ex "set trace-commands on" \
  -ex "tbreak throw_exception_1" -ex run -ex "python bp = FBP()" \
  -ex "info breakpoints" -ex continue -ex "info breakpoints" \
  -ex "python print (bp.return_value)"
+tbreak throw_exception_1
Temporary breakpoint 1 at 0x400bd5: file test.c, line 6.
+run

Temporary breakpoint 1, throw_exception_1 (e=10) at test.c:6
6         throw new int (e);
+python bp = FBP()
Temporary breakpoint 2 at 0x400c2f: file test.c, line 21.
+info breakpoints
Num     Type           Disp Enb Address    What
2       breakpoint     del  y   0x00400c2f in main() at test.c:21 thread 1
        stop only in thread 1
+continue
Exception #10

Temporary breakpoint 2, main () at test.c:21
21        i += 1;
+info breakpoints
No breakpoints or watchpoints.
+python print (bp.return_value)
None
...

Surprisingly, it did.  The explanation is that FinishBreakPoint is really a
frame-return-address breakpoint, and that address happens to be at line 21,
which is still executed after the throw in throw_exception_1.

Interestingly, with -m32 the FinishBreakPoint doesn't trigger, because the
frame-return-address happens to be an instruction which is part of line 15.

VIII.

In conclusion, the FinishBreakpoint is a frame-return-address breakpoint.

After being set, either:
- it triggers, or
- an out-of-scope event will be generated.

If an out-of-scope event is generated, it will be due to incomplete function
termination.

OTOH, incomplete function termination does not guarantee an out-of-scope event
instead of hitting the breakpoint.

IX.

The documentation states that 'A finish breakpoint is a temporary breakpoint
set at the return address of a frame, based on the finish command'.

It's indeed somewhat similar to the finish command, at least in the sense that
both may stop at the frame-return-address.

But the finish command can accurately detect function termination.

And the finish command will stop at any other address that is the first
address not in the original function.

The documentation needs updating to accurately describe what it does.

A better implementation of a finish breakpoint would be one that borrows from
the finish command implementation.  That one:
- installs a thread_fsm, and
- continues

A finish breakpoint would do the same minus the continue, but it requires gdb
to handle multiple thread_fsms at a time (because other commands may wish to
install their own thread_fsm), which AFAICT is not supported yet.

XI.

This patch repairs a minor part of the functionality, and updates
documentation and test-cases to match actual behaviour.

The question remains how useful the functionality is, as it is now
( see f.i. discussion at
https://sourceware.org/pipermail/gdb-patches/2021-January/175290.html ).
Perhaps it would be better to deprecate this in a follow-up patch in some form
or another, say by disabling it by default and introducing a maintenance
command that switches it on, with the warning that it is deprecated.

Tested on x86_64-linux with native and target board unix/-m32, by rebuilding
and running the test-cases:
- gdb.python/py-finish-breakpoint.exp
- gdb.python/py-finish-breakpoint2.exp

---
 gdb/breakpoint.c                                   | 10 ++++++++++
 gdb/doc/python.texi                                |  6 ++++--
 gdb/python/py-finishbreakpoint.c                   | 21 +++++++++++++++++++++
 gdb/testsuite/gdb.python/py-finish-breakpoint2.exp | 16 +++++++++++++---
 4 files changed, 48 insertions(+), 5 deletions(-)

diff --git a/gdb/breakpoint.c b/gdb/breakpoint.c
index dbbea6b8bff..64a9a3d394f 100644
--- a/gdb/breakpoint.c
+++ b/gdb/breakpoint.c
@@ -15452,6 +15452,10 @@ initialize_breakpoint_ops (void)
 
 static struct cmd_list_element *enablebreaklist = NULL;
 
+#if HAVE_PYTHON
+extern gdb::observers::token bpfinishpy_handle_thread_exit_observer_token;
+#endif
+
 /* See breakpoint.h.  */
 
 cmd_list_element *commands_cmd_element = nullptr;
@@ -16065,6 +16069,12 @@ This is useful for formatted output in user-defined commands."));
 
   gdb::observers::about_to_proceed.attach (breakpoint_about_to_proceed,
 					   "breakpoint");
+#if HAVE_PYTHON
+  gdb::observers::thread_exit.attach
+    (remove_threaded_breakpoints, "breakpoint",
+     { &bpfinishpy_handle_thread_exit_observer_token });
+#else
   gdb::observers::thread_exit.attach (remove_threaded_breakpoints,
 				      "breakpoint");
+#endif
 }
diff --git a/gdb/doc/python.texi b/gdb/doc/python.texi
index f4865b3d6a6..17a67800ba2 100644
--- a/gdb/doc/python.texi
+++ b/gdb/doc/python.texi
@@ -5698,7 +5698,7 @@ attribute is @code{None}.  This attribute is writable.
 @tindex gdb.FinishBreakpoint
 
 A finish breakpoint is a temporary breakpoint set at the return address of
-a frame, based on the @code{finish} command.  @code{gdb.FinishBreakpoint}
+a frame.  @code{gdb.FinishBreakpoint}
 extends @code{gdb.Breakpoint}.  The underlying breakpoint will be disabled 
 and deleted when the execution will run out of the breakpoint scope (i.e.@: 
 @code{Breakpoint.stop} or @code{FinishBreakpoint.out_of_scope} triggered).
@@ -5717,7 +5717,9 @@ details about this argument.
 In some circumstances (e.g.@: @code{longjmp}, C@t{++} exceptions, @value{GDBN} 
 @code{return} command, @dots{}), a function may not properly terminate, and
 thus never hit the finish breakpoint.  When @value{GDBN} notices such a
-situation, the @code{out_of_scope} callback will be triggered.
+situation, the @code{out_of_scope} callback will be triggered.  Note
+though that improper function termination does not guarantee that the
+finish breakpoint is not hit.
 
 You may want to sub-class @code{gdb.FinishBreakpoint} and override this
 method:
diff --git a/gdb/python/py-finishbreakpoint.c b/gdb/python/py-finishbreakpoint.c
index 1d8373d807e..a881103fdad 100644
--- a/gdb/python/py-finishbreakpoint.c
+++ b/gdb/python/py-finishbreakpoint.c
@@ -398,6 +398,24 @@ bpfinishpy_handle_exit (struct inferior *inf)
     bpfinishpy_detect_out_scope_cb (bp, nullptr);
 }
 
+/* Attached to `thread_exit' notifications, triggers all the necessary out of
+   scope notifications.  */
+
+static void
+bpfinishpy_handle_thread_exit (struct thread_info *tp, int ignore)
+{
+  gdbpy_enter enter_py (target_gdbarch (), current_language);
+
+  for (breakpoint *bp : all_breakpoints_safe ())
+    {
+      if (tp->global_num == bp->thread)
+	bpfinishpy_detect_out_scope_cb (bp, nullptr);
+    }
+}
+
+extern gdb::observers::token bpfinishpy_handle_thread_exit_observer_token;
+gdb::observers::token bpfinishpy_handle_thread_exit_observer_token;
+
 /* Initialize the Python finish breakpoint code.  */
 
 int
@@ -414,6 +432,9 @@ gdbpy_initialize_finishbreakpoints (void)
 				      "py-finishbreakpoint");
   gdb::observers::inferior_exit.attach (bpfinishpy_handle_exit,
 					"py-finishbreakpoint");
+  gdb::observers::thread_exit.attach
+    (bpfinishpy_handle_thread_exit,
+     bpfinishpy_handle_thread_exit_observer_token, "py-finishbreakpoint");
 
   return 0;
 }
diff --git a/gdb/testsuite/gdb.python/py-finish-breakpoint2.exp b/gdb/testsuite/gdb.python/py-finish-breakpoint2.exp
index 58e086ad3b4..46c39d0d108 100644
--- a/gdb/testsuite/gdb.python/py-finish-breakpoint2.exp
+++ b/gdb/testsuite/gdb.python/py-finish-breakpoint2.exp
@@ -50,10 +50,20 @@ gdb_test "continue" "Breakpoint .*throw_exception_1.*" "run to exception 1"
 gdb_test "python print (len(gdb.breakpoints()))" "3" "check BP count"
 gdb_test "python ExceptionFinishBreakpoint(gdb.newest_frame())" \
     "init ExceptionFinishBreakpoint" "set FinishBP after the exception"
-gdb_test "continue" ".*stopped at ExceptionFinishBreakpoint.*" "check FinishBreakpoint in catch()"
-gdb_test "python print (len(gdb.breakpoints()))" "3" "check finish BP removal"
 
-gdb_test "continue" ".*Breakpoint.* throw_exception_1.*" "continue to second exception"
+gdb_test_multiple "continue" "continue after setting FinishBreakpoint" {
+    -re -wrap ".*stopped at ExceptionFinishBreakpoint.*" {
+	pass "$gdb_test_name (scenario 1, triggered)"
+	gdb_test "python print (len(gdb.breakpoints()))" "3" \
+	    "check finish BP removal"
+	gdb_test "continue" ".*Breakpoint.* throw_exception_1.*" \
+	    "continue to second exception"
+    }
+    -re -wrap ".*Breakpoint.* throw_exception_1.*" {
+	pass "$gdb_test_name (scenario 2, not triggered)"
+    }
+}
+
 gdb_test "python ExceptionFinishBreakpoint(gdb.newest_frame())" \
     "init ExceptionFinishBreakpoint" "set FinishBP after the exception again"
 gdb_test "continue" ".*exception did not finish.*" "FinishBreakpoint with exception thrown not caught"

Places

File gdb-python-finishbreakpoint-update.patch of Package gdb (Revision 2ff30aa5256a5b3795b609f70bf269e9)

Places