File 60787714-x86-HPET-avoid-legacy-replacement-mode... of Package xen

Overview Repositories Revisions Requests Users Attributes Meta

File 60787714-x86-HPET-avoid-legacy-replacement-mode.patch of Package xen (Revision 2ec989e1b40bf5aaa2a921cea343167a)

Currently displaying revision 2ec989e1b40bf5aaa2a921cea343167a , Show latest

# Commit b53173e7cdafb7a318a239d557478fd73734a86a
# Date 2021-04-15 18:25:40 +0100
# Author Jan Beulich <jbeulich@suse.com>
# Committer Andrew Cooper <andrew.cooper3@citrix.com>
x86/hpet: Don't enable legacy replacement mode unconditionally

Commit e1de4c196a2e ("x86/timer: Fix boot on Intel systems using ITSSPRC
static PIT clock gating") was reported to cause boot failures on certain
AMD Ryzen systems.

Refine the fix to do nothing in the default case, and only attempt to
configure legacy replacement mode if IRQ0 is found to not be working.  If
legacy replacement mode doesn't help, undo it before falling back to other IRQ
routing configurations.

In addition, introduce a "hpet" command line option so this heuristic
can be overridden.  Since it makes little sense to introduce just
"hpet=legacy-replacement", also allow for a boolean argument as well as
"broadcast" to replace the separate "hpetbroadcast" option.

Reported-by: Frédéric Pierret frederic.pierret@qubes-os.org
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Roger Pau Monné <roger.pau@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Tested-by: Frédéric Pierret <frederic.pierret@qubes-os.org>

--- a/docs/misc/xen-command-line.pandoc
+++ b/docs/misc/xen-command-line.pandoc
@@ -1148,9 +1148,42 @@ supported. See docs/misc/arm/big.LITTLE.
 When the hmp-unsafe option is disabled (default), CPUs that are not
 identical to the boot CPU will be parked and not used by Xen.
 
+### hpet
+    = List of [ <bool> | broadcast=<bool> | legacy-replacement=<bool> ]
+
+    Applicability: x86
+
+Controls Xen's use of the system's High Precision Event Timer.  By default,
+Xen will use an HPET when available and not subject to errata.  Use of the
+HPET can be disabled by specifying `hpet=0`.
+
+ * The `broadcast` boolean is disabled by default, but forces Xen to keep
+   using the broadcast for CPUs in deep C-states even when an RTC interrupt is
+   enabled.  This then also affects raising of the RTC interrupt.
+
+ * The `legacy-replacement` boolean allows for control over whether Legacy
+   Replacement mode is enabled.
+
+   Legacy Replacement mode is intended for hardware which does not have an
+   8254 PIT, and allows the HPET to be configured into a compatible mode.
+   Intel chipsets from Skylake/ApolloLake onwards can turn the PIT off for
+   power saving reasons, and there is no platform-agnostic mechanism for
+   discovering this.
+
+   By default, Xen will not change hardware configuration, unless the PIT
+   appears to be absent, at which point Xen will try to enable Legacy
+   Replacement mode before falling back to pre-IO-APIC interrupt routing
+   options.
+
+   This behaviour can be inhibited by specifying `legacy-replacement=0`.
+   Alternatively, this mode can be enabled unconditionally (if available) by
+   specifying `legacy-replacement=1`.
+
 ### hpetbroadcast (x86)
 > `= <boolean>`
 
+Deprecated alternative of `hpet=broadcast`.
+
 ### hvm_debug (x86)
 > `= <integer>`
 
--- a/xen/arch/x86/hpet.c
+++ b/xen/arch/x86/hpet.c
@@ -50,6 +50,8 @@ static unsigned int __read_mostly num_hp
 DEFINE_PER_CPU(struct hpet_event_channel *, cpu_bc_channel);
 
 unsigned long __initdata hpet_address;
+int8_t __initdata opt_hpet_legacy_replacement = -1;
+static bool __initdata opt_hpet = true;
 u8 __initdata hpet_blockid;
 u8 __initdata hpet_flags;
 
@@ -61,6 +63,32 @@ u8 __initdata hpet_flags;
 static bool __initdata force_hpet_broadcast;
 boolean_param("hpetbroadcast", force_hpet_broadcast);
 
+static int __init parse_hpet_param(const char *s)
+{
+    const char *ss;
+    int val, rc = 0;
+
+    do {
+        ss = strchr(s, ',');
+        if ( !ss )
+            ss = strchr(s, '\0');
+
+        if ( (val = parse_bool(s, ss)) >= 0 )
+            opt_hpet = val;
+        else if ( (val = parse_boolean("broadcast", s, ss)) >= 0 )
+            force_hpet_broadcast = val;
+        else if ( (val = parse_boolean("legacy-replacement", s, ss)) >= 0 )
+            opt_hpet_legacy_replacement = val;
+        else
+            rc = -EINVAL;
+
+        s = ss + 1;
+    } while ( *ss );
+
+    return rc;
+}
+custom_param("hpet", parse_hpet_param);
+
 /*
  * Calculate a multiplication factor for scaled math, which is used to convert
  * nanoseconds based values to clock ticks:
@@ -763,6 +791,9 @@ int hpet_legacy_irq_tick(void)
 
 static u32 *hpet_boot_cfg;
 static uint64_t __initdata hpet_rate;
+static __initdata struct {
+    uint32_t cmp, cfg;
+} pre_legacy_c0;
 
 bool __init hpet_enable_legacy_replacement_mode(void)
 {
@@ -776,8 +807,11 @@ bool __init hpet_enable_legacy_replaceme
     /* Stop the main counter. */
     hpet_write32(cfg & ~HPET_CFG_ENABLE, HPET_CFG);
 
+    /* Stash channel 0's old CFG/CMP incase we need to undo. */
+    pre_legacy_c0.cfg = c0_cfg = hpet_read32(HPET_Tn_CFG(0));
+    pre_legacy_c0.cmp = hpet_read32(HPET_Tn_CMP(0));
+
     /* Reconfigure channel 0 to be 32bit periodic. */
-    c0_cfg = hpet_read32(HPET_Tn_CFG(0));
     c0_cfg |= (HPET_TN_ENABLE | HPET_TN_PERIODIC | HPET_TN_SETVAL |
                HPET_TN_32BIT);
     hpet_write32(c0_cfg, HPET_Tn_CFG(0));
@@ -823,17 +857,33 @@ bool __init hpet_enable_legacy_replaceme
     return true;
 }
 
+void __init hpet_disable_legacy_replacement_mode(void)
+{
+    unsigned int cfg = hpet_read32(HPET_CFG);
+
+    ASSERT(hpet_rate);
+
+    cfg &= ~(HPET_CFG_LEGACY | HPET_CFG_ENABLE);
+
+    /* Stop the main counter and disable legacy mode. */
+    hpet_write32(cfg, HPET_CFG);
+
+    /* Restore pre-Legacy Replacement Mode settings. */
+    hpet_write32(pre_legacy_c0.cfg, HPET_Tn_CFG(0));
+    hpet_write32(pre_legacy_c0.cmp, HPET_Tn_CMP(0));
+
+    /* Restart the main counter. */
+    hpet_write32(cfg | HPET_CFG_ENABLE, HPET_CFG);
+}
+
 u64 __init hpet_setup(void)
 {
     unsigned int hpet_id, hpet_period;
     unsigned int last;
 
-    if ( hpet_rate )
+    if ( hpet_rate || !hpet_address || !opt_hpet )
         return hpet_rate;
 
-    if ( hpet_address == 0 )
-        return 0;
-
     set_fixmap_nocache(FIX_HPET_BASE, hpet_address);
 
     hpet_id = hpet_read32(HPET_ID);
@@ -858,19 +908,8 @@ u64 __init hpet_setup(void)
     hpet_rate = 1000000000000000ULL; /* 10^15 */
     (void)do_div(hpet_rate, hpet_period);
 
-    /*
-     * Intel chipsets from Skylake/ApolloLake onwards can statically clock
-     * gate the 8259 PIT.  This option is enabled by default in slightly later
-     * systems, as turning the PIT off is a prerequisite to entering the C11
-     * power saving state.
-     *
-     * Xen currently depends on the legacy timer interrupt being active while
-     * IRQ routing is configured.
-     *
-     * Reconfigure the HPET into legacy mode to re-establish the timer
-     * interrupt.
-     */
-    hpet_enable_legacy_replacement_mode();
+    if ( opt_hpet_legacy_replacement > 0 )
+        hpet_enable_legacy_replacement_mode();
 
     return hpet_rate;
 }
--- a/xen/arch/x86/io_apic.c
+++ b/xen/arch/x86/io_apic.c
@@ -28,6 +28,8 @@
 #include <xen/acpi.h>
 #include <xen/keyhandler.h>
 #include <xen/softirq.h>
+
+#include <asm/hpet.h>
 #include <asm/mc146818rtc.h>
 #include <asm/smp.h>
 #include <asm/desc.h>
@@ -1929,6 +1931,35 @@ static void __init check_timer(void)
             local_irq_restore(flags);
             return;
         }
+
+        /*
+         * Intel chipsets from Skylake/ApolloLake onwards can statically clock
+         * gate the 8254 PIT.  This option is enabled by default in slightly
+         * later systems, as turning the PIT off is a prerequisite to entering
+         * the C11 power saving state.
+         *
+         * Xen currently depends on the legacy timer interrupt being active
+         * while IRQ routing is configured.
+         *
+         * If the user hasn't made an explicit choice, attempt to reconfigure
+         * the HPET into legacy mode to re-establish the timer interrupt.
+         */
+        if ( opt_hpet_legacy_replacement < 0 &&
+             hpet_enable_legacy_replacement_mode() )
+        {
+            printk(XENLOG_ERR "..no 8254 timer found - trying HPET Legacy Replacement Mode\n");
+
+            if ( timer_irq_works() )
+            {
+                local_irq_restore(flags);
+                return;
+            }
+
+            /* Legacy Replacement mode hasn't helped.  Undo it. */
+            printk(XENLOG_ERR "..no HPET timer found - reverting Legacy Replacement Mode\n");
+            hpet_disable_legacy_replacement_mode();
+        }
+
         clear_IO_APIC_pin(apic1, pin1);
         printk(KERN_ERR "..MP-BIOS bug: 8254 timer not connected to "
                "IO-APIC\n");
--- a/xen/include/asm-x86/hpet.h
+++ b/xen/include/asm-x86/hpet.h
@@ -53,6 +53,7 @@
 extern unsigned long hpet_address;
 extern u8 hpet_blockid;
 extern u8 hpet_flags;
+extern int8_t opt_hpet_legacy_replacement;
 
 /*
  * Detect and initialise HPET hardware: return counter update frequency.
@@ -79,6 +80,12 @@ int hpet_legacy_irq_tick(void);
 bool hpet_enable_legacy_replacement_mode(void);
 
 /*
+ * Undo the effects of hpet_disable_legacy_replacement_mode().  Must not be
+ * called unless enable() returned true.
+ */
+void hpet_disable_legacy_replacement_mode(void);
+
+/*
  * Temporarily use an HPET event counter for timer interrupt handling,
  * rather than using the LAPIC timer. Used for Cx state entry.
  */

Places

File 60787714-x86-HPET-avoid-legacy-replacement-mode.patch of Package xen (Revision 2ec989e1b40bf5aaa2a921cea343167a)

Places