Sign Up
Log In
Log In
or
Sign Up
Places
All Projects
Status Monitor
Collapse sidebar
SUSE:SLE-15-SP5:GA
gdb.8854
gdb-rhbz881849-ipv6-1of3.patch
Overview
Repositories
Revisions
Requests
Users
Attributes
Meta
File gdb-rhbz881849-ipv6-1of3.patch of Package gdb.8854
From FEDORA_PATCHES Mon Sep 17 00:00:00 2001 From: Sergio Durigan Junior <sergiodj@redhat.com> Date: Fri, 18 May 2018 01:29:24 -0400 Subject: gdb-rhbz881849-ipv6-1of3.patch ;; Implement IPv6 support for GDB/gdbserver (RH BZ 881849, Sergio Durigan Junior). Implement IPv6 support for GDB/gdbserver This patch implements IPv6 support for both GDB and gdbserver. Based on my research, it is the fourth attempt to do that since 2006. Since I used ideas from all of the previous patches, I also added their authors's names on the ChangeLogs as a way to recognize their efforts. For reference sake, you can find the previous attempts at: https://sourceware.org/ml/gdb-patches/2006-09/msg00192.html https://sourceware.org/ml/gdb-patches/2014-02/msg00248.html https://sourceware.org/ml/gdb-patches/2016-02/msg00226.html The basic idea behind the patch is to start using the new 'getaddrinfo'/'getnameinfo' calls, which are responsible for translating names and addresses in a protocol-independent way. This means that if we ever have a new version of the IP protocol, we won't need to change the code again (or, at least, won't have to change the majority of the code). The function 'getaddrinfo' returns a linked list of possible addresses to connect to. Dealing with multiple addresses proved to be a hard task with the current TCP auto-retry mechanism implemented on ser-tcp:net_open. For example, when gdbserver listened only on an IPv4 socket: $ ./gdbserver --once 127.0.0.1:1234 ./a.out and GDB was instructed to try to connect to both IPv6 and IPv4 sockets: $ ./gdb -ex 'target extended-remote localhost:1234' ./a.out the user would notice a somewhat big delay before GDB was able to connect to the IPv4 socket. This happened because GDB was trying to connect to the IPv6 socket first, and had to wait until the connection timed out before it tried to connect to the IPv4 socket. For that reason, I had to rewrite the main loop and implement a new method for handling multiple connections. After some discussion, Pedro and I agreed on the following algorithm: 1) For each entry returned by 'getaddrinfo', we try to open a socket and connect to it. 2.a) If we have a successful 'connect', we just use that connection. 2.b) If we don't have a successfull 'connect', but if we've got a ECONNREFUSED (meaning the the connection was refused), we keep track of this fact by using a flag. 2.c) If we don't have a successfull 'connect', but if we've got a EINPROGRESS (meaning that the connection is in progress), we perform a 'select' call on the socket until we have a result (either a successful connection, or an error on the socket). 3) If tcp_auto_retry is true, and we haven't gotten a successful connection, and at least one of our attempts failed with ECONNREFUSED, then we wait a little bit (i.e., call 'wait_for_connect'), check to see if there was a timeout/interruption (in which case we bail out), and then go back to (1). After multiple tests, I was able to connect without delay on the scenario described above, and was also able to connect in all other types of scenarios. I also implemented some hostname parsing functions (along with their corresponding unit tests) which are used to help GDB and gdbserver to parse hostname strings provided by the user. These new functions are living inside common/netstuff.[ch]. I've had to do that since IPv6 introduces a new URL scheme, which defines that square brackets can be used to enclose the host part and differentiate it from the port (e.g., "[::1]:1234" means "host ::1, port 1234"). I spent some time thinking about a reasonable way to interpret what the user wants, and I came up with the following: - If the user has provided a prefix that doesn't specify the protocol version (i.e., "tcp:" or "udp:"), or if the user has not provided any prefix, don't make any assumptions (i.e., assume AF_UNSPEC when dealing with 'getaddrinfo') *unless* the host starts with "[" (in which case, assume it's an IPv6 host). - If the user has provided a prefix that does specify the protocol version (i.e., "tcp4:", "tcp6:", "udp4:" or "udp6:"), then respect that. This method doesn't follow strictly what RFC 2732 proposes (that literal IPv6 addresses should be provided enclosed in "[" and "]") because IPv6 addresses still can be provided without square brackets in our case, but since we have prefixes to specify protocol versions I think this is not an issue. Another thing worth mentioning is the new 'GDB_TEST_SOCKETHOST' testcase parameter, which makes it possible to specify the hostname (without the port) to be used when testing GDB and gdbserver. For example, to run IPv6 tests: $ make check-gdb RUNTESTFLAGS='GDB_TEST_SOCKETHOST=tcp6:[::1]' Or, to run IPv4 tests: $ make check-gdb RUNTESTFLAGS='GDB_TEST_SOCKETHOST=tcp4:127.0.0.1' This required a few changes on the gdbserver-base.exp, and also a minimal adjustment on gdb.server/run-without-local-binary.exp. Finally, I've implemented a new testcase, gdb.server/server-connect.exp, which is supposed to run on the native host and perform various "smoke tests" using different connection methods. This patch has been regression-tested on BuildBot and locally, and also built using a x86_64-w64-mingw32 GCC, and no problems were found. gdb/ChangeLog: 2018-07-11 Sergio Durigan Junior <sergiodj@redhat.com> Jan Kratochvil <jan.kratochvil@redhat.com> Paul Fertser <fercerpav@gmail.com> Tsutomu Seki <sekiriki@gmail.com> Pedro Alves <palves@redhat.com> * Makefile.in (SUBDIR_UNITTESTS_SRCS): Add 'unittests/parse-connection-spec-selftests.c'. (COMMON_SFILES): Add 'common/netstuff.c'. (HFILES_NO_SRCDIR): Add 'common/netstuff.h'. * NEWS (Changes since GDB 8.2): Mention IPv6 support. * common/netstuff.c: New file. * common/netstuff.h: New file. * ser-tcp.c: Include 'netstuff.h' and 'wspiapi.h'. (wait_for_connect): Update comment. New parameter 'gdb::optional<int> sock' instead of 'struct serial *scb'. Use 'sock' directly instead of 'scb->fd'. (try_connect): New function, with code from 'net_open'. (net_open): Rewrite main loop to deal with multiple sockets/addresses. Handle IPv6-style hostnames; implement support for IPv6 connections. * unittests/parse-connection-spec-selftests.c: New file. gdb/gdbserver/ChangeLog: 2018-07-11 Sergio Durigan Junior <sergiodj@redhat.com> Jan Kratochvil <jan.kratochvil@redhat.com> Paul Fertser <fercerpav@gmail.com> Tsutomu Seki <sekiriki@gmail.com> * Makefile.in (SFILES): Add '$(srcdir)/common/netstuff.c'. (OBS): Add 'common/netstuff.o'. (GDBREPLAY_OBS): Likewise. * gdbreplay.c: Include 'wspiapi.h' and 'netstuff.h'. (remote_open): Implement support for IPv6 connections. * remote-utils.c: Include 'netstuff.h', 'filestuff.h' and 'wspiapi.h'. (handle_accept_event): Accept connections from IPv6 sources. (remote_prepare): Handle IPv6-style hostnames; implement support for IPv6 connections. (remote_open): Implement support for printing connections from IPv6 sources. gdb/testsuite/ChangeLog: 2018-07-11 Sergio Durigan Junior <sergiodj@redhat.com> Jan Kratochvil <jan.kratochvil@redhat.com> Paul Fertser <fercerpav@gmail.com> Tsutomu Seki <sekiriki@gmail.com> * README (Testsuite Parameters): Mention new 'GDB_TEST_SOCKETHOST' parameter. * boards/native-extended-gdbserver.exp: Do not set 'sockethost' by default. * boards/native-gdbserver.exp: Likewise. * gdb.server/run-without-local-binary.exp: Improve regexp used for detecting when a remote debugging connection succeeds. * gdb.server/server-connect.exp: New file. * lib/gdbserver-support.exp (gdbserver_default_get_comm_port): Do not prefix the port number with ":". (gdbserver_start): New global GDB_TEST_SOCKETHOST. Implement support for detecting and using it. Add '$debughost_gdbserver' to the list of arguments used to start gdbserver. Handle case when gdbserver cannot resolve a network name. gdb/doc/ChangeLog: 2018-07-11 Sergio Durigan Junior <sergiodj@redhat.com> Jan Kratochvil <jan.kratochvil@redhat.com> Paul Fertser <fercerpav@gmail.com> Tsutomu Seki <sekiriki@gmail.com> * gdb.texinfo (Remote Connection Commands): Add explanation about new IPv6 support. Add new connection prefixes. diff --git a/gdb/Makefile.in b/gdb/Makefile.in --- a/gdb/Makefile.in +++ b/gdb/Makefile.in @@ -430,6 +430,7 @@ SUBDIR_UNITTESTS_SRCS = \ unittests/offset-type-selftests.c \ unittests/observable-selftests.c \ unittests/optional-selftests.c \ + unittests/parse-connection-spec-selftests.c \ unittests/ptid-selftests.c \ unittests/rsp-low-selftests.c \ unittests/scoped_fd-selftests.c \ @@ -967,6 +968,7 @@ COMMON_SFILES = \ common/job-control.c \ common/gdb_tilde_expand.c \ common/gdb_vecs.c \ + common/netstuff.c \ common/new-op.c \ common/pathstuff.c \ common/print-utils.c \ @@ -1448,6 +1450,7 @@ HFILES_NO_SRCDIR = \ common/gdb_vecs.h \ common/gdb_wait.h \ common/common-inferior.h \ + common/netstuff.h \ common/host-defs.h \ common/pathstuff.h \ common/print-utils.h \ diff --git a/gdb/NEWS b/gdb/NEWS --- a/gdb/NEWS +++ b/gdb/NEWS @@ -1,6 +1,12 @@ What has changed in GDB? (Organized release by release) +*** Changes since GDB 8.2 + +* GDB and GDBserver now support IPv6 connections. IPv6 addresses + can be passed using the '[ADDRESS]:PORT' notation, or the regular + 'ADDRESS:PORT' method. + *** Changes in GDB 8.2 * The 'set disassembler-options' command now supports specifying options diff --git a/gdb/common/netstuff.c b/gdb/common/netstuff.c new file mode 100644 --- /dev/null +++ b/gdb/common/netstuff.c @@ -0,0 +1,155 @@ +/* Operations on network stuff. + Copyright (C) 2018 Free Software Foundation, Inc. + + This file is part of GDB. + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 3 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program. If not, see <http://www.gnu.org/licenses/>. */ + +#include "common-defs.h" +#include "netstuff.h" +#include <algorithm> + +#ifdef USE_WIN32API +#include <winsock2.h> +#include <wspiapi.h> +#else +#include <netinet/in.h> +#include <arpa/inet.h> +#include <netdb.h> +#include <sys/socket.h> +#include <netinet/tcp.h> +#endif + +/* See common/netstuff.h. */ + +scoped_free_addrinfo::~scoped_free_addrinfo () +{ + freeaddrinfo (m_res); +} + +/* See common/netstuff.h. */ + +parsed_connection_spec +parse_connection_spec_without_prefix (std::string spec, struct addrinfo *hint) +{ + parsed_connection_spec ret; + size_t last_colon_pos = 0; + /* We're dealing with IPv6 if: + + - ai_family is AF_INET6, or + - ai_family is not AF_INET, and + - spec[0] is '[', or + - the number of ':' on spec is greater than 1. */ + bool is_ipv6 = (hint->ai_family == AF_INET6 + || (hint->ai_family != AF_INET + && (spec[0] == '[' + || std::count (spec.begin (), + spec.end (), ':') > 1))); + + if (is_ipv6) + { + if (spec[0] == '[') + { + /* IPv6 addresses can be written as '[ADDR]:PORT', and we + support this notation. */ + size_t close_bracket_pos = spec.find_first_of (']'); + + if (close_bracket_pos == std::string::npos) + error (_("Missing close bracket in hostname '%s'"), + spec.c_str ()); + + hint->ai_family = AF_INET6; + + const char c = spec[close_bracket_pos + 1]; + + if (c == '\0') + last_colon_pos = std::string::npos; + else if (c != ':') + error (_("Invalid cruft after close bracket in '%s'"), + spec.c_str ()); + + /* Erase both '[' and ']'. */ + spec.erase (0, 1); + spec.erase (close_bracket_pos - 1, 1); + } + else if (spec.find_first_of (']') != std::string::npos) + error (_("Missing open bracket in hostname '%s'"), + spec.c_str ()); + } + + if (last_colon_pos == 0) + last_colon_pos = spec.find_last_of (':'); + + /* The length of the hostname part. */ + size_t host_len; + + if (last_colon_pos != std::string::npos) + { + /* The user has provided a port. */ + host_len = last_colon_pos; + ret.port_str = spec.substr (last_colon_pos + 1); + } + else + host_len = spec.size (); + + ret.host_str = spec.substr (0, host_len); + + /* Default hostname is localhost. */ + if (ret.host_str.empty ()) + ret.host_str = "localhost"; + + return ret; +} + +/* See common/netstuff.h. */ + +parsed_connection_spec +parse_connection_spec (const char *spec, struct addrinfo *hint) +{ + /* Struct to hold the association between valid prefixes, their + family and socktype. */ + struct host_prefix + { + /* The prefix. */ + const char *prefix; + + /* The 'ai_family'. */ + int family; + + /* The 'ai_socktype'. */ + int socktype; + }; + static const struct host_prefix prefixes[] = + { + { "udp:", AF_UNSPEC, SOCK_DGRAM }, + { "tcp:", AF_UNSPEC, SOCK_STREAM }, + { "udp4:", AF_INET, SOCK_DGRAM }, + { "tcp4:", AF_INET, SOCK_STREAM }, + { "udp6:", AF_INET6, SOCK_DGRAM }, + { "tcp6:", AF_INET6, SOCK_STREAM }, + }; + + for (const host_prefix prefix : prefixes) + if (startswith (spec, prefix.prefix)) + { + spec += strlen (prefix.prefix); + hint->ai_family = prefix.family; + hint->ai_socktype = prefix.socktype; + hint->ai_protocol + = hint->ai_socktype == SOCK_DGRAM ? IPPROTO_UDP : IPPROTO_TCP; + break; + } + + return parse_connection_spec_without_prefix (spec, hint); +} diff --git a/gdb/common/netstuff.h b/gdb/common/netstuff.h new file mode 100644 --- /dev/null +++ b/gdb/common/netstuff.h @@ -0,0 +1,76 @@ +/* Operations on network stuff. + Copyright (C) 2018 Free Software Foundation, Inc. + + This file is part of GDB. + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 3 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program. If not, see <http://www.gnu.org/licenses/>. */ + +#ifndef NETSTUFF_H +#define NETSTUFF_H + +#include <string> + +/* Like NI_MAXHOST/NI_MAXSERV, but enough for numeric forms. */ +#define GDB_NI_MAX_ADDR 64 +#define GDB_NI_MAX_PORT 16 + +/* Helper class to guarantee that we always call 'freeaddrinfo'. */ + +class scoped_free_addrinfo +{ +public: + /* Default constructor. */ + explicit scoped_free_addrinfo (struct addrinfo *ainfo) + : m_res (ainfo) + { + } + + /* Destructor responsible for free'ing M_RES by calling + 'freeaddrinfo'. */ + ~scoped_free_addrinfo (); + + DISABLE_COPY_AND_ASSIGN (scoped_free_addrinfo); + +private: + /* The addrinfo resource. */ + struct addrinfo *m_res; +}; + +/* The struct we return after parsing the connection spec. */ + +struct parsed_connection_spec +{ + /* The hostname. */ + std::string host_str; + + /* The port, if any. */ + std::string port_str; +}; + + +/* Parse SPEC (which is a string in the form of "ADDR:PORT") and + return a 'parsed_connection_spec' structure with the proper fields + filled in. Also adjust HINT accordingly. */ +extern parsed_connection_spec + parse_connection_spec_without_prefix (std::string spec, + struct addrinfo *hint); + +/* Parse SPEC (which is a string in the form of + "[tcp[6]:|udp[6]:]ADDR:PORT") and return a 'parsed_connection_spec' + structure with the proper fields filled in. Also adjust HINT + accordingly. */ +extern parsed_connection_spec parse_connection_spec (const char *spec, + struct addrinfo *hint); + +#endif /* ! NETSTUFF_H */ diff --git a/gdb/doc/ChangeLog b/gdb/doc/ChangeLog --- a/gdb/doc/ChangeLog +++ b/gdb/doc/ChangeLog @@ -1,3 +1,11 @@ +2018-07-11 Sergio Durigan Junior <sergiodj@redhat.com> + Jan Kratochvil <jan.kratochvil@redhat.com> + Paul Fertser <fercerpav@gmail.com> + Tsutomu Seki <sekiriki@gmail.com> + + * gdb.texinfo (Remote Connection Commands): Add explanation + about new IPv6 support. Add new connection prefixes. + 2018-08-21 Alan Hayward <alan.hayward@arm.com> * gdb.texinfo (AArch64 SVE): New subsubsection. diff --git a/gdb/doc/gdb.texinfo b/gdb/doc/gdb.texinfo --- a/gdb/doc/gdb.texinfo +++ b/gdb/doc/gdb.texinfo @@ -20548,16 +20548,27 @@ If you're using a serial line, you may want to give @value{GDBN} the @code{target} command. @item target remote @code{@var{host}:@var{port}} +@itemx target remote @code{@var{[host]}:@var{port}} @itemx target remote @code{tcp:@var{host}:@var{port}} +@itemx target remote @code{tcp:@var{[host]}:@var{port}} +@itemx target remote @code{tcp4:@var{host}:@var{port}} +@itemx target remote @code{tcp6:@var{host}:@var{port}} +@itemx target remote @code{tcp6:@var{[host]}:@var{port}} @itemx target extended-remote @code{@var{host}:@var{port}} +@itemx target extended-remote @code{@var{[host]}:@var{port}} @itemx target extended-remote @code{tcp:@var{host}:@var{port}} +@itemx target extended-remote @code{tcp:@var{[host]}:@var{port}} +@itemx target extended-remote @code{tcp4:@var{host}:@var{port}} +@itemx target extended-remote @code{tcp6:@var{host}:@var{port}} +@itemx target extended-remote @code{tcp6:@var{[host]}:@var{port}} @cindex @acronym{TCP} port, @code{target remote} Debug using a @acronym{TCP} connection to @var{port} on @var{host}. -The @var{host} may be either a host name or a numeric @acronym{IP} -address; @var{port} must be a decimal number. The @var{host} could be -the target machine itself, if it is directly connected to the net, or -it might be a terminal server which in turn has a serial line to the -target. +The @var{host} may be either a host name, a numeric @acronym{IPv4} +address, or a numeric @acronym{IPv6} address (with or without the +square brackets to separate the address from the port); @var{port} +must be a decimal number. The @var{host} could be the target machine +itself, if it is directly connected to the net, or it might be a +terminal server which in turn has a serial line to the target. For example, to connect to port 2828 on a terminal server named @code{manyfarms}: @@ -20566,6 +20577,28 @@ For example, to connect to port 2828 on a terminal server named target remote manyfarms:2828 @end smallexample +To connect to port 2828 on a terminal server whose address is +@code{2001:0db8:85a3:0000:0000:8a2e:0370:7334}, you can either use the +square bracket syntax: + +@smallexample +target remote [2001:0db8:85a3:0000:0000:8a2e:0370:7334]:2828 +@end smallexample + +@noindent +or explicitly specify the @acronym{IPv6} protocol: + +@smallexample +target remote tcp6:2001:0db8:85a3:0000:0000:8a2e:0370:7334:2828 +@end smallexample + +This last example may be confusing to the reader, because there is no +visible separation between the hostname and the port number. +Therefore, we recommend the user to provide @acronym{IPv6} addresses +using square brackets for clarity. However, it is important to +mention that for @value{GDBN} there is no ambiguity: the number after +the last colon is considered to be the port number. + If your remote target is actually running on the same machine as your debugger session (e.g.@: a simulator for your target running on the same host), you can omit the hostname. For example, to connect to @@ -20579,7 +20612,15 @@ target remote :1234 Note that the colon is still required here. @item target remote @code{udp:@var{host}:@var{port}} +@itemx target remote @code{udp:@var{[host]}:@var{port}} +@itemx target remote @code{udp4:@var{host}:@var{port}} +@itemx target remote @code{udp6:@var{[host]}:@var{port}} +@itemx target extended-remote @code{udp:@var{host}:@var{port}} @itemx target extended-remote @code{udp:@var{host}:@var{port}} +@itemx target extended-remote @code{udp:@var{[host]}:@var{port}} +@itemx target extended-remote @code{udp4:@var{host}:@var{port}} +@itemx target extended-remote @code{udp6:@var{host}:@var{port}} +@itemx target extended-remote @code{udp6:@var{[host]}:@var{port}} @cindex @acronym{UDP} port, @code{target remote} Debug using @acronym{UDP} packets to @var{port} on @var{host}. For example, to connect to @acronym{UDP} port 2828 on a terminal server named @code{manyfarms}: diff --git a/gdb/gdbserver/ChangeLog b/gdb/gdbserver/ChangeLog --- a/gdb/gdbserver/ChangeLog +++ b/gdb/gdbserver/ChangeLog @@ -1,3 +1,22 @@ +2018-07-11 Sergio Durigan Junior <sergiodj@redhat.com> + Jan Kratochvil <jan.kratochvil@redhat.com> + Paul Fertser <fercerpav@gmail.com> + Tsutomu Seki <sekiriki@gmail.com> + + * Makefile.in (SFILES): Add '$(srcdir)/common/netstuff.c'. + (OBS): Add 'common/netstuff.o'. + (GDBREPLAY_OBS): Likewise. + * gdbreplay.c: Include 'wspiapi.h' and 'netstuff.h'. + (remote_open): Implement support for IPv6 + connections. + * remote-utils.c: Include 'netstuff.h', 'filestuff.h' + and 'wspiapi.h'. + (handle_accept_event): Accept connections from IPv6 sources. + (remote_prepare): Handle IPv6-style hostnames; implement + support for IPv6 connections. + (remote_open): Implement support for printing connections from + IPv6 sources. + 2018-08-26 Simon Marchi <simon.marchi@ericsson.com> PR gdb/23374 diff --git a/gdb/gdbserver/Makefile.in b/gdb/gdbserver/Makefile.in --- a/gdb/gdbserver/Makefile.in +++ b/gdb/gdbserver/Makefile.in @@ -211,6 +211,7 @@ SFILES = \ $(srcdir)/common/job-control.c \ $(srcdir)/common/gdb_tilde_expand.c \ $(srcdir)/common/gdb_vecs.c \ + $(srcdir)/common/netstuff.c \ $(srcdir)/common/new-op.c \ $(srcdir)/common/pathstuff.c \ $(srcdir)/common/print-utils.c \ @@ -254,6 +255,7 @@ OBS = \ common/format.o \ common/gdb_tilde_expand.o \ common/gdb_vecs.o \ + common/netstuff.o \ common/new-op.o \ common/pathstuff.o \ common/print-utils.o \ @@ -290,6 +292,7 @@ GDBREPLAY_OBS = \ common/common-exceptions.o \ common/common-utils.o \ common/errors.o \ + common/netstuff.o \ common/print-utils.o \ gdbreplay.o \ utils.o \ diff --git a/gdb/gdbserver/gdbreplay.c b/gdb/gdbserver/gdbreplay.c --- a/gdb/gdbserver/gdbreplay.c +++ b/gdb/gdbserver/gdbreplay.c @@ -46,8 +46,11 @@ #if USE_WIN32API #include <winsock2.h> +#include <wspiapi.h> #endif +#include "netstuff.h" + #ifndef HAVE_SOCKLEN_T typedef int socklen_t; #endif @@ -142,56 +145,108 @@ remote_close (void) static void remote_open (char *name) { - if (!strchr (name, ':')) + char *last_colon = strrchr (name, ':'); + + if (last_colon == NULL) { fprintf (stderr, "%s: Must specify tcp connection as host:addr\n", name); fflush (stderr); exit (1); } - else - { + #ifdef USE_WIN32API - static int winsock_initialized; + static int winsock_initialized; #endif - char *port_str; - int port; - struct sockaddr_in sockaddr; - socklen_t tmp; - int tmp_desc; + char *port_str; + int tmp; + int tmp_desc; + struct addrinfo hint; + struct addrinfo *ainfo; - port_str = strchr (name, ':'); + memset (&hint, 0, sizeof (hint)); + /* Assume no prefix will be passed, therefore we should use + AF_UNSPEC. */ + hint.ai_family = AF_UNSPEC; + hint.ai_socktype = SOCK_STREAM; + hint.ai_protocol = IPPROTO_TCP; - port = atoi (port_str + 1); + parsed_connection_spec parsed = parse_connection_spec (name, &hint); + + if (parsed.port_str.empty ()) + error (_("Missing port on hostname '%s'"), name); #ifdef USE_WIN32API - if (!winsock_initialized) - { - WSADATA wsad; + if (!winsock_initialized) + { + WSADATA wsad; - WSAStartup (MAKEWORD (1, 0), &wsad); - winsock_initialized = 1; - } + WSAStartup (MAKEWORD (1, 0), &wsad); + winsock_initialized = 1; + } #endif - tmp_desc = socket (PF_INET, SOCK_STREAM, 0); - if (tmp_desc == -1) - perror_with_name ("Can't open socket"); + int r = getaddrinfo (parsed.host_str.c_str (), parsed.port_str.c_str (), + &hint, &ainfo); - /* Allow rapid reuse of this port. */ - tmp = 1; - setsockopt (tmp_desc, SOL_SOCKET, SO_REUSEADDR, (char *) &tmp, - sizeof (tmp)); + if (r != 0) + { + fprintf (stderr, "%s:%s: cannot resolve name: %s\n", + parsed.host_str.c_str (), parsed.port_str.c_str (), + gai_strerror (r)); + fflush (stderr); + exit (1); + } + + scoped_free_addrinfo free_ainfo (ainfo); + + struct addrinfo *p; + + for (p = ainfo; p != NULL; p = p->ai_next) + { + tmp_desc = socket (p->ai_family, p->ai_socktype, p->ai_protocol); - sockaddr.sin_family = PF_INET; - sockaddr.sin_port = htons (port); - sockaddr.sin_addr.s_addr = INADDR_ANY; + if (tmp_desc >= 0) + break; + } + + if (p == NULL) + perror_with_name ("Cannot open socket"); - if (bind (tmp_desc, (struct sockaddr *) &sockaddr, sizeof (sockaddr)) - || listen (tmp_desc, 1)) - perror_with_name ("Can't bind address"); + /* Allow rapid reuse of this port. */ + tmp = 1; + setsockopt (tmp_desc, SOL_SOCKET, SO_REUSEADDR, (char *) &tmp, + sizeof (tmp)); + + switch (p->ai_family) + { + case AF_INET: + ((struct sockaddr_in *) p->ai_addr)->sin_addr.s_addr = INADDR_ANY; + break; + case AF_INET6: + ((struct sockaddr_in6 *) p->ai_addr)->sin6_addr = in6addr_any; + break; + default: + fprintf (stderr, "Invalid 'ai_family' %d\n", p->ai_family); + exit (1); + } + + if (bind (tmp_desc, p->ai_addr, p->ai_addrlen) != 0) + perror_with_name ("Can't bind address"); + + if (p->ai_socktype == SOCK_DGRAM) + remote_desc = tmp_desc; + else + { + struct sockaddr_storage sockaddr; + socklen_t sockaddrsize = sizeof (sockaddr); + char orig_host[GDB_NI_MAX_ADDR], orig_port[GDB_NI_MAX_PORT]; + + if (listen (tmp_desc, 1) != 0) + perror_with_name ("Can't listen on socket"); + + remote_desc = accept (tmp_desc, (struct sockaddr *) &sockaddr, + &sockaddrsize); - tmp = sizeof (sockaddr); - remote_desc = accept (tmp_desc, (struct sockaddr *) &sockaddr, &tmp); if (remote_desc == -1) perror_with_name ("Accept failed"); @@ -206,6 +261,16 @@ remote_open (char *name) setsockopt (remote_desc, IPPROTO_TCP, TCP_NODELAY, (char *) &tmp, sizeof (tmp)); + if (getnameinfo ((struct sockaddr *) &sockaddr, sockaddrsize, + orig_host, sizeof (orig_host), + orig_port, sizeof (orig_port), + NI_NUMERICHOST | NI_NUMERICSERV) == 0) + { + fprintf (stderr, "Remote debugging from host %s, port %s\n", + orig_host, orig_port); + fflush (stderr); + } + #ifndef USE_WIN32API close (tmp_desc); /* No longer need this */ diff --git a/gdb/gdbserver/remote-utils.c b/gdb/gdbserver/remote-utils.c --- a/gdb/gdbserver/remote-utils.c +++ b/gdb/gdbserver/remote-utils.c @@ -26,6 +26,8 @@ #include "dll.h" #include "rsp-low.h" #include "gdbthread.h" +#include "netstuff.h" +#include "filestuff.h" #include <ctype.h> #if HAVE_SYS_IOCTL_H #include <sys/ioctl.h> @@ -63,6 +65,7 @@ #if USE_WIN32API #include <winsock2.h> +#include <wspiapi.h> #endif #if __QNX__ @@ -151,19 +154,18 @@ enable_async_notification (int fd) static int handle_accept_event (int err, gdb_client_data client_data) { - struct sockaddr_in sockaddr; - socklen_t tmp; + struct sockaddr_storage sockaddr; + socklen_t len = sizeof (sockaddr); if (debug_threads) debug_printf ("handling possible accept event\n"); - tmp = sizeof (sockaddr); - remote_desc = accept (listen_desc, (struct sockaddr *) &sockaddr, &tmp); + remote_desc = accept (listen_desc, (struct sockaddr *) &sockaddr, &len); if (remote_desc == -1) perror_with_name ("Accept failed"); /* Enable TCP keep alive process. */ - tmp = 1; + socklen_t tmp = 1; setsockopt (remote_desc, SOL_SOCKET, SO_KEEPALIVE, (char *) &tmp, sizeof (tmp)); @@ -192,8 +194,19 @@ handle_accept_event (int err, gdb_client_data client_data) delete_file_handler (listen_desc); /* Convert IP address to string. */ - fprintf (stderr, "Remote debugging from host %s\n", - inet_ntoa (sockaddr.sin_addr)); + char orig_host[GDB_NI_MAX_ADDR], orig_port[GDB_NI_MAX_PORT]; + + int r = getnameinfo ((struct sockaddr *) &sockaddr, len, + orig_host, sizeof (orig_host), + orig_port, sizeof (orig_port), + NI_NUMERICHOST | NI_NUMERICSERV); + + if (r != 0) + fprintf (stderr, _("Could not obtain remote address: %s\n"), + gai_strerror (r)); + else + fprintf (stderr, _("Remote debugging from host %s, port %s\n"), + orig_host, orig_port); enable_async_notification (remote_desc); @@ -222,10 +235,7 @@ remote_prepare (const char *name) #ifdef USE_WIN32API static int winsock_initialized; #endif - int port; - struct sockaddr_in sockaddr; socklen_t tmp; - char *port_end; remote_is_stdio = 0; if (strcmp (name, STDIO_CONNECTION_NAME) == 0) @@ -238,17 +248,25 @@ remote_prepare (const char *name) return; } - port_str = strchr (name, ':'); - if (port_str == NULL) + struct addrinfo hint; + struct addrinfo *ainfo; + + memset (&hint, 0, sizeof (hint)); + /* Assume no prefix will be passed, therefore we should use + AF_UNSPEC. */ + hint.ai_family = AF_UNSPEC; + hint.ai_socktype = SOCK_STREAM; + hint.ai_protocol = IPPROTO_TCP; + + parsed_connection_spec parsed + = parse_connection_spec_without_prefix (name, &hint); + + if (parsed.port_str.empty ()) { cs.transport_is_reliable = 0; return; } - port = strtoul (port_str + 1, &port_end, 10); - if (port_str[1] == '\0' || *port_end != '\0') - error ("Bad port argument: %s", name); - #ifdef USE_WIN32API if (!winsock_initialized) { @@ -259,8 +277,26 @@ remote_prepare (const char *name) } #endif - listen_desc = socket (PF_INET, SOCK_STREAM, IPPROTO_TCP); - if (listen_desc == -1) + int r = getaddrinfo (parsed.host_str.c_str (), parsed.port_str.c_str (), + &hint, &ainfo); + + if (r != 0) + error (_("%s: cannot resolve name: %s"), name, gai_strerror (r)); + + scoped_free_addrinfo freeaddrinfo (ainfo); + + struct addrinfo *iter; + + for (iter = ainfo; iter != NULL; iter = iter->ai_next) + { + listen_desc = gdb_socket_cloexec (iter->ai_family, iter->ai_socktype, + iter->ai_protocol); + + if (listen_desc >= 0) + break; + } + + if (iter == NULL) perror_with_name ("Can't open socket"); /* Allow rapid reuse of this port. */ @@ -268,14 +304,25 @@ remote_prepare (const char *name) setsockopt (listen_desc, SOL_SOCKET, SO_REUSEADDR, (char *) &tmp, sizeof (tmp)); - sockaddr.sin_family = PF_INET; - sockaddr.sin_port = htons (port); - sockaddr.sin_addr.s_addr = INADDR_ANY; + switch (iter->ai_family) + { + case AF_INET: + ((struct sockaddr_in *) iter->ai_addr)->sin_addr.s_addr = INADDR_ANY; + break; + case AF_INET6: + ((struct sockaddr_in6 *) iter->ai_addr)->sin6_addr = in6addr_any; + break; + default: + internal_error (__FILE__, __LINE__, + _("Invalid 'ai_family' %d\n"), iter->ai_family); + } - if (bind (listen_desc, (struct sockaddr *) &sockaddr, sizeof (sockaddr)) - || listen (listen_desc, 1)) + if (bind (listen_desc, iter->ai_addr, iter->ai_addrlen) != 0) perror_with_name ("Can't bind address"); + if (listen (listen_desc, 1) != 0) + perror_with_name ("Can't listen on socket"); + cs.transport_is_reliable = 1; } @@ -350,18 +397,24 @@ remote_open (const char *name) #endif /* USE_WIN32API */ else { - int port; - socklen_t len; - struct sockaddr_in sockaddr; - - len = sizeof (sockaddr); - if (getsockname (listen_desc, - (struct sockaddr *) &sockaddr, &len) < 0 - || len < sizeof (sockaddr)) + char listen_port[GDB_NI_MAX_PORT]; + struct sockaddr_storage sockaddr; + socklen_t len = sizeof (sockaddr); + + if (getsockname (listen_desc, (struct sockaddr *) &sockaddr, &len) < 0) perror_with_name ("Can't determine port"); - port = ntohs (sockaddr.sin_port); - fprintf (stderr, "Listening on port %d\n", port); + int r = getnameinfo ((struct sockaddr *) &sockaddr, len, + NULL, 0, + listen_port, sizeof (listen_port), + NI_NUMERICSERV); + + if (r != 0) + fprintf (stderr, _("Can't obtain port where we are listening: %s"), + gai_strerror (r)); + else + fprintf (stderr, _("Listening on port %s\n"), listen_port); + fflush (stderr); /* Register the event loop handler. */ diff --git a/gdb/ser-tcp.c b/gdb/ser-tcp.c --- a/gdb/ser-tcp.c +++ b/gdb/ser-tcp.c @@ -25,6 +25,7 @@ #include "cli/cli-decode.h" #include "cli/cli-setshow.h" #include "filestuff.h" +#include "netstuff.h" #include <sys/types.h> @@ -39,6 +40,7 @@ #ifdef USE_WIN32API #include <winsock2.h> +#include <wspiapi.h> #ifndef ETIMEDOUT #define ETIMEDOUT WSAETIMEDOUT #endif @@ -81,12 +83,13 @@ static unsigned int tcp_retry_limit = 15; #define POLL_INTERVAL 5 -/* Helper function to wait a while. If SCB is non-null, wait on its - file descriptor. Otherwise just wait on a timeout, updating *POLLS. - Returns -1 on timeout or interrupt, otherwise the value of select. */ +/* Helper function to wait a while. If SOCK is not -1, wait on its + file descriptor. Otherwise just wait on a timeout, updating + *POLLS. Returns -1 on timeout or interrupt, otherwise the value of + select. */ static int -wait_for_connect (struct serial *scb, unsigned int *polls) +wait_for_connect (int sock, unsigned int *polls) { struct timeval t; int n; @@ -120,24 +123,24 @@ wait_for_connect (struct serial *scb, unsigned int *polls) t.tv_usec = 0; } - if (scb) + if (sock >= 0) { fd_set rset, wset, eset; FD_ZERO (&rset); - FD_SET (scb->fd, &rset); + FD_SET (sock, &rset); wset = rset; eset = rset; - + /* POSIX systems return connection success or failure by signalling wset. Windows systems return success in wset and failure in eset. - + We must call select here, rather than gdb_select, because the serial structure has not yet been initialized - the MinGW select wrapper will not know that this FD refers to a socket. */ - n = select (scb->fd + 1, &rset, &wset, &eset, &t); + n = select (sock + 1, &rset, &wset, &eset, &t); } else /* Use gdb_select here, since we have no file descriptors, and on @@ -153,80 +156,28 @@ wait_for_connect (struct serial *scb, unsigned int *polls) return n; } -/* Open a tcp socket. */ +/* Try to connect to the host represented by AINFO. If the connection + succeeds, return its socket. Otherwise, return -1 and set ERRNO + accordingly. POLLS is used when 'connect' returns EINPROGRESS, and + we need to invoke 'wait_for_connect' to obtain the status. */ -int -net_open (struct serial *scb, const char *name) +static int +try_connect (const struct addrinfo *ainfo, unsigned int *polls) { - char hostname[100]; - const char *port_str; - int n, port, tmp; - int use_udp; - struct hostent *hostent; - struct sockaddr_in sockaddr; -#ifdef USE_WIN32API - u_long ioarg; -#else - int ioarg; -#endif - unsigned int polls = 0; - - use_udp = 0; - if (startswith (name, "udp:")) - { - use_udp = 1; - name = name + 4; - } - else if (startswith (name, "tcp:")) - name = name + 4; - - port_str = strchr (name, ':'); - - if (!port_str) - error (_("net_open: No colon in host name!")); /* Shouldn't ever - happen. */ - - tmp = std::min (port_str - name, (ptrdiff_t) sizeof hostname - 1); - strncpy (hostname, name, tmp); /* Don't want colon. */ - hostname[tmp] = '\000'; /* Tie off host name. */ - port = atoi (port_str + 1); - - /* Default hostname is localhost. */ - if (!hostname[0]) - strcpy (hostname, "localhost"); - - hostent = gethostbyname (hostname); - if (!hostent) - { - fprintf_unfiltered (gdb_stderr, "%s: unknown host\n", hostname); - errno = ENOENT; - return -1; - } + int sock = gdb_socket_cloexec (ainfo->ai_family, ainfo->ai_socktype, + ainfo->ai_protocol); - sockaddr.sin_family = PF_INET; - sockaddr.sin_port = htons (port); - memcpy (&sockaddr.sin_addr.s_addr, hostent->h_addr, - sizeof (struct in_addr)); - - retry: - - if (use_udp) - scb->fd = gdb_socket_cloexec (PF_INET, SOCK_DGRAM, 0); - else - scb->fd = gdb_socket_cloexec (PF_INET, SOCK_STREAM, 0); - - if (scb->fd == -1) + if (sock < 0) return -1; - + /* Set socket nonblocking. */ - ioarg = 1; - ioctl (scb->fd, FIONBIO, &ioarg); + int ioarg = 1; + + ioctl (sock, FIONBIO, &ioarg); /* Use Non-blocking connect. connect() will return 0 if connected already. */ - n = connect (scb->fd, (struct sockaddr *) &sockaddr, sizeof (sockaddr)); - - if (n < 0) + if (connect (sock, ainfo->ai_addr, ainfo->ai_addrlen) < 0) { #ifdef USE_WIN32API int err = WSAGetLastError(); @@ -234,21 +185,26 @@ net_open (struct serial *scb, const char *name) int err = errno; #endif - /* Maybe we're waiting for the remote target to become ready to - accept connections. */ - if (tcp_auto_retry + /* If we've got a "connection refused" error, just return + -1. The caller will know what to do. */ + if ( #ifdef USE_WIN32API - && err == WSAECONNREFUSED + err == WSAECONNREFUSED #else - && err == ECONNREFUSED + err == ECONNREFUSED #endif - && wait_for_connect (NULL, &polls) >= 0) + ) { - close (scb->fd); - goto retry; + close (sock); + errno = err; + return -1; } if ( + /* Any other error (except EINPROGRESS) will be "swallowed" + here. We return without specifying a return value, and + set errno if the caller wants to inspect what + happened. */ #ifdef USE_WIN32API /* Under Windows, calling "connect" with a non-blocking socket results in WSAEWOULDBLOCK, not WSAEINPROGRESS. */ @@ -258,66 +214,166 @@ net_open (struct serial *scb, const char *name) #endif ) { + close (sock); errno = err; - net_close (scb); return -1; } /* Looks like we need to wait for the connect. */ - do - { - n = wait_for_connect (scb, &polls); - } + int n; + + do + n = wait_for_connect (sock, polls); while (n == 0); + if (n < 0) { - net_close (scb); + int saved_errno = errno; + + /* A negative value here means that we either timed out or + got interrupted by the user. Just return. */ + close (sock); + errno = saved_errno; return -1; } } /* Got something. Is it an error? */ - { - int res, err; - socklen_t len; - - len = sizeof (err); - /* On Windows, the fourth parameter to getsockopt is a "char *"; - on UNIX systems it is generally "void *". The cast to "char *" - is OK everywhere, since in C++ any data pointer type can be - implicitly converted to "void *". */ - res = getsockopt (scb->fd, SOL_SOCKET, SO_ERROR, (char *) &err, &len); - if (res < 0 || err) - { - /* Maybe the target still isn't ready to accept the connection. */ - if (tcp_auto_retry + int err; + socklen_t len = sizeof (err); + + /* On Windows, the fourth parameter to getsockopt is a "char *"; + on UNIX systems it is generally "void *". The cast to "char *" + is OK everywhere, since in C++ any data pointer type can be + implicitly converted to "void *". */ + int ret = getsockopt (sock, SOL_SOCKET, SO_ERROR, (char *) &err, &len); + + if (ret < 0) + { + int saved_errno = errno; + + close (sock); + errno = saved_errno; + return -1; + } + else if (ret == 0 && err != 0) + { + close (sock); + errno = err; + return -1; + } + + /* The connection succeeded. Return the socket. */ + return sock; +} + +/* Open a tcp socket. */ + +int +net_open (struct serial *scb, const char *name) +{ + struct addrinfo hint; + struct addrinfo *ainfo; + + memset (&hint, 0, sizeof (hint)); + /* Assume no prefix will be passed, therefore we should use + AF_UNSPEC. */ + hint.ai_family = AF_UNSPEC; + hint.ai_socktype = SOCK_STREAM; + hint.ai_protocol = IPPROTO_TCP; + + parsed_connection_spec parsed = parse_connection_spec (name, &hint); + + if (parsed.port_str.empty ()) + error (_("Missing port on hostname '%s'"), name); + + int r = getaddrinfo (parsed.host_str.c_str (), + parsed.port_str.c_str (), + &hint, &ainfo); + + if (r != 0) + { + fprintf_unfiltered (gdb_stderr, _("%s: cannot resolve name: %s\n"), + name, gai_strerror (r)); + errno = ENOENT; + return -1; + } + + scoped_free_addrinfo free_ainfo (ainfo); + + /* Flag to indicate whether we've got a connection refused. It will + be true if any of the connections tried was refused. */ + bool got_connrefused; + /* If a connection succeeeds, SUCCESS_AINFO will point to the + 'struct addrinfo' that succeed. */ + struct addrinfo *success_ainfo = NULL; + unsigned int polls = 0; + + /* Assume the worst. */ + scb->fd = -1; + + do + { + got_connrefused = false; + + for (struct addrinfo *iter = ainfo; iter != NULL; iter = iter->ai_next) + { + /* Iterate over the list of possible addresses to connect + to. For each, we'll try to connect and see if it + succeeds. */ + int sock = try_connect (iter, &polls); + + if (sock >= 0) + { + /* We've gotten a successful connection. Save its + 'struct addrinfo', the socket, and break. */ + success_ainfo = iter; + scb->fd = sock; + break; + } + else if ( #ifdef USE_WIN32API - && err == WSAECONNREFUSED + errno == WSAECONNREFUSED #else - && err == ECONNREFUSED + errno == ECONNREFUSED #endif - && wait_for_connect (NULL, &polls) >= 0) - { - close (scb->fd); - goto retry; - } - if (err) - errno = err; - net_close (scb); - return -1; - } - } + ) + got_connrefused = true; + } + } + /* Just retry if: + + - tcp_auto_retry is true, and + - We haven't gotten a connection yet, and + - Any of our connection attempts returned with ECONNREFUSED, and + - wait_for_connect signals that we can keep going. */ + while (tcp_auto_retry + && success_ainfo == NULL + && got_connrefused + && wait_for_connect (-1, &polls) >= 0); + + if (success_ainfo == NULL) + { + net_close (scb); + return -1; + } /* Turn off nonblocking. */ - ioarg = 0; +#ifdef USE_WIN32API + u_long ioarg = 0; +#else + int ioarg = 0; +#endif + ioctl (scb->fd, FIONBIO, &ioarg); - if (use_udp == 0) + if (success_ainfo->ai_socktype == IPPROTO_TCP) { /* Disable Nagle algorithm. Needed in some cases. */ - tmp = 1; + int tmp = 1; + setsockopt (scb->fd, IPPROTO_TCP, TCP_NODELAY, - (char *)&tmp, sizeof (tmp)); + (char *) &tmp, sizeof (tmp)); } #ifdef SIGPIPE diff --git a/gdb/testsuite/ChangeLog b/gdb/testsuite/ChangeLog --- a/gdb/testsuite/ChangeLog +++ b/gdb/testsuite/ChangeLog @@ -1,3 +1,23 @@ +2018-07-11 Sergio Durigan Junior <sergiodj@redhat.com> + Jan Kratochvil <jan.kratochvil@redhat.com> + Paul Fertser <fercerpav@gmail.com> + Tsutomu Seki <sekiriki@gmail.com> + + * README (Testsuite Parameters): Mention new 'GDB_TEST_SOCKETHOST' + parameter. + * boards/native-extended-gdbserver.exp: Do not set 'sockethost' + by default. + * boards/native-gdbserver.exp: Likewise. + * gdb.server/run-without-local-binary.exp: Improve regexp used + for detecting when a remote debugging connection succeeds. + * gdb.server/server-connect.exp: New file. + * lib/gdbserver-support.exp (gdbserver_default_get_comm_port): + Do not prefix the port number with ":". + (gdbserver_start): New global GDB_TEST_SOCKETHOST. Implement + support for detecting and using it. Add '$debughost_gdbserver' + to the list of arguments used to start gdbserver. Handle case + when gdbserver cannot resolve a network name. + 2018-08-31 Tom Tromey <tom@tromey.com> * gdb.rust/simple.rs: Rename second variable "v". diff --git a/gdb/testsuite/README b/gdb/testsuite/README --- a/gdb/testsuite/README +++ b/gdb/testsuite/README @@ -259,6 +259,20 @@ This make (not runtest) variable is used to specify whether the testsuite preloads the read1.so library into expect. Any non-empty value means true. See "Race detection" below. +GDB_TEST_SOCKETHOST + +This variable can provide the hostname/address that should be used +when performing GDBserver-related tests. This is useful in some +situations, e.g., when you want to test the IPv6 connectivity of GDB +and GDBserver, or when using a different hostname/address is needed. +For example, to make GDB and GDBserver use IPv6-only connections, you +can do: + + make check TESTS="gdb.server/*.exp" RUNTESTFLAGS='GDB_TEST_SOCKETHOST=tcp6:[::1]' + +Note that only a hostname/address can be provided, without a port +number. + Race detection ************** diff --git a/gdb/testsuite/boards/native-extended-gdbserver.exp b/gdb/testsuite/boards/native-extended-gdbserver.exp --- a/gdb/testsuite/boards/native-extended-gdbserver.exp +++ b/gdb/testsuite/boards/native-extended-gdbserver.exp @@ -24,8 +24,6 @@ load_generic_config "extended-gdbserver" load_board_description "gdbserver-base" load_board_description "local-board" -set_board_info sockethost "localhost:" - # We will be using the extended GDB remote protocol. set_board_info gdb_protocol "extended-remote" diff --git a/gdb/testsuite/boards/native-gdbserver.exp b/gdb/testsuite/boards/native-gdbserver.exp --- a/gdb/testsuite/boards/native-gdbserver.exp +++ b/gdb/testsuite/boards/native-gdbserver.exp @@ -30,7 +30,6 @@ set_board_info gdb,do_reload_on_run 1 # There's no support for argument-passing (yet). set_board_info noargs 1 -set_board_info sockethost "localhost:" set_board_info use_gdb_stub 1 set_board_info exit_is_reliable 1 diff --git a/gdb/testsuite/gdb.server/run-without-local-binary.exp b/gdb/testsuite/gdb.server/run-without-local-binary.exp --- a/gdb/testsuite/gdb.server/run-without-local-binary.exp +++ b/gdb/testsuite/gdb.server/run-without-local-binary.exp @@ -53,7 +53,7 @@ save_vars { GDBFLAGS } { set use_gdb_stub 0 gdb_test "target ${gdbserver_protocol} ${gdbserver_gdbport}" \ - "Remote debugging using $gdbserver_gdbport" \ + "Remote debugging using [string_to_regexp $gdbserver_gdbport]" \ "connect to gdbserver" gdb_test "run" \ diff --git a/gdb/testsuite/gdb.server/server-connect.exp b/gdb/testsuite/gdb.server/server-connect.exp new file mode 100644 --- /dev/null +++ b/gdb/testsuite/gdb.server/server-connect.exp @@ -0,0 +1,111 @@ +# This testcase is part of GDB, the GNU debugger. +# +# Copyright 2018 Free Software Foundation, Inc. +# +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 3 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program. If not, see <http://www.gnu.org/licenses/>. + +# Test multiple types of connection (IPv4, IPv6, TCP, UDP) and make +# sure both gdbserver and GDB work. + +load_lib gdbserver-support.exp + +standard_testfile normal.c + +if {[skip_gdbserver_tests]} { + return 0 +} + +# We want to have control over where we start gdbserver. +if { [is_remote target] } { + return 0 +} + +if { [prepare_for_testing "failed to prepare" $testfile $srcfile debug] } { + return -1 +} + +# Make sure we're disconnected, in case we're testing with an +# extended-remote board, therefore already connected. +gdb_test "disconnect" ".*" + +set target_exec [gdbserver_download_current_prog] + +# An array containing the test instructions for each scenario. The +# description of each field is as follows: +# +# - The connection specification to be used when starting +# gdbserver/GDB. This string will be used to set the +# GDB_TEST_SOCKETHOST when calling gdbserver_start. +# +# - A flag indicating whether gdbserver should fail when we attempt to +# start it. Useful when testing erroneous connection specs such as +# "tcp8:". +# +# - The prefix that should be prepended to the test messages. +set test_params \ + { \ + { "tcp4:127.0.0.1" 0 "tcp4" } \ + { "tcp6:::1" 0 "tcp6" } \ + { "tcp6:[::1]" 0 "tcp6-with-brackets" } \ + { "tcp:localhost" 0 "tcp" } \ + { "udp4:127.0.0.1" 0 "udp4" } \ + { "udp6:::1" 0 "udp6" } \ + { "udp6:[::1]" 0 "udp6-with-brackets" } \ + { "tcp8:123" 1 "tcp8" } \ + { "udp123:::" 1 "udp123" } \ + { "garbage:1234" 1 "garbage:1234" } \ + } + +# The best way to test different types of connections is to set the +# GDB_TEST_SOCKETHOST variable accordingly. +save_vars { GDB_TEST_SOCKETHOST } { + foreach line $test_params { + set sockhost [lindex $line 0] + set gdbserver_should_fail [lindex $line 1] + set prefix [lindex $line 2] + + with_test_prefix $prefix { + set GDB_TEST_SOCKETHOST $sockhost + set test "start gdbserver" + + # Try to start gdbserver. + set catchres [catch {set res [gdbserver_start "" $target_exec]} errmsg] + + if { $catchres != 0 } { + if { $gdbserver_should_fail } { + pass "$test: gdbserver failed as expected" + } else { + fail "$test: $errmsg" + } + continue + } else { + if { $gdbserver_should_fail } { + fail "$test: gdbserver should fail but did not" + } else { + pass "$test" + } + } + + set gdbserver_protocol [lindex $res 0] + set gdbserver_gdbport [lindex $res 1] + set test "connect to gdbserver using $sockhost" + + if { [gdb_target_cmd $gdbserver_protocol $gdbserver_gdbport] == 0 } { + pass $test + } else { + fail $test + } + } + } +} diff --git a/gdb/testsuite/lib/gdbserver-support.exp b/gdb/testsuite/lib/gdbserver-support.exp --- a/gdb/testsuite/lib/gdbserver-support.exp +++ b/gdb/testsuite/lib/gdbserver-support.exp @@ -211,7 +211,7 @@ proc gdbserver_default_get_remote_address { host port } { # Default routine to compute the "comm" argument for gdbserver. proc gdbserver_default_get_comm_port { port } { - return ":$port" + return "$port" } # Start a gdbserver process with initial OPTIONS and trailing ARGUMENTS. @@ -221,6 +221,7 @@ proc gdbserver_default_get_comm_port { port } { proc gdbserver_start { options arguments } { global portnum + global GDB_TEST_SOCKETHOST # Port id -- either specified in baseboard file, or managed here. if [target_info exists gdb,socketport] { @@ -231,10 +232,22 @@ proc gdbserver_start { options arguments } { } # Extract the local and remote host ids from the target board struct. - if [target_info exists sockethost] { + if { [info exists GDB_TEST_SOCKETHOST] } { + # The user is not supposed to provide a port number, just a + # hostname/address, therefore we add the trailing ":" here. + set debughost "${GDB_TEST_SOCKETHOST}:" + # Escape open and close square brackets. + set debughost_tmp [string map { [ \\[ ] \\] } $debughost] + # We need a "gdbserver" version of the debughost, which will + # have the possible connection prefix stripped. This is + # because gdbserver currently doesn't recognize the prefixes. + regsub -all "^\(tcp:|udp:|tcp4:|udp4:|tcp6:|udp6:\)" $debughost_tmp "" debughost_gdbserver + } elseif [target_info exists sockethost] { set debughost [target_info sockethost] + set debughost_gdbserver $debughost } else { set debughost "localhost:" + set debughost_gdbserver $debughost } # Some boards use a different value for the port that is passed to @@ -277,8 +290,14 @@ proc gdbserver_start { options arguments } { if { $options != "" } { append gdbserver_command " $options" } + if { $debughost_gdbserver != "" } { + append gdbserver_command " $debughost_gdbserver" + } if { $portnum != "" } { - append gdbserver_command " [$get_comm_port $portnum]" + if { $debughost_gdbserver == "" } { + append gdbserver_command " " + } + append gdbserver_command "[$get_comm_port $portnum]" } if { $arguments != "" } { append gdbserver_command " $arguments" @@ -307,6 +326,9 @@ proc gdbserver_start { options arguments } { continue } } + -re ".*: cannot resolve name: Name or service not known\r\n" { + error "gdbserver cannot resolve name." + } timeout { error "Timeout waiting for gdbserver response." } diff --git a/gdb/unittests/parse-connection-spec-selftests.c b/gdb/unittests/parse-connection-spec-selftests.c new file mode 100644 --- /dev/null +++ b/gdb/unittests/parse-connection-spec-selftests.c @@ -0,0 +1,249 @@ +/* Self tests for parsing connection specs for GDB, the GNU debugger. + + Copyright (C) 2018 Free Software Foundation, Inc. + + This file is part of GDB. + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 3 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program. If not, see <http://www.gnu.org/licenses/>. */ + +#include "defs.h" +#include "selftest.h" +#include "common/netstuff.h" +#include "diagnostics.h" +#ifdef USE_WIN32API +#include <winsock2.h> +#include <wspiapi.h> +#else +#include <netinet/in.h> +#include <arpa/inet.h> +#include <netdb.h> +#include <sys/socket.h> +#include <netinet/tcp.h> +#endif + +namespace selftests { +namespace parse_connection_spec_tests { + +/* Auxiliary struct that holds info about a specific test for a + connection spec. */ + +struct parse_conn_test +{ + /* The connection spec. */ + const char *connspec; + + /* Expected result from 'parse_connection_spec'. */ + parsed_connection_spec expected_result; + + /* True if this test should fail, false otherwise. If true, only + the CONNSPEC field should be considered as valid. */ + bool should_fail; + + /* The expected AI_FAMILY to be found on the 'struct addrinfo' + HINT. */ + int exp_ai_family; + + /* The expected AI_SOCKTYPE to be found on the 'struct addrinfo' + HINT. */ + int exp_ai_socktype; + + /* The expected AI_PROTOCOL to be found on the 'struct addrinfo' + HINT. */ + int exp_ai_protocol; +}; + +/* Some defines to help us fill a 'struct parse_conn_test'. */ + +/* Initialize a full entry. */ +#define INIT_ENTRY(ADDR, EXP_HOST, EXP_PORT, SHOULD_FAIL, EXP_AI_FAMILY, \ + EXP_AI_SOCKTYPE, EXP_AI_PROTOCOL) \ + { ADDR, { EXP_HOST, EXP_PORT }, SHOULD_FAIL, EXP_AI_FAMILY, \ + EXP_AI_SOCKTYPE, EXP_AI_PROTOCOL } + +/* Initialize an unprefixed entry. In this case, we don't expect + anything on the 'struct addrinfo' HINT. */ +#define INIT_UNPREFIXED_ENTRY(ADDR, EXP_HOST, EXP_PORT) \ + INIT_ENTRY (ADDR, EXP_HOST, EXP_PORT, false, 0, 0, 0) + +/* Initialized an unprefixed IPv6 entry. In this case, we don't + expect anything on the 'struct addrinfo' HINT. */ +#define INIT_UNPREFIXED_IPV6_ENTRY(ADDR, EXP_HOST, EXP_PORT) \ + INIT_ENTRY (ADDR, EXP_HOST, EXP_PORT, false, AF_INET6, 0, 0) + +/* Initialize a prefixed entry. */ +#define INIT_PREFIXED_ENTRY(ADDR, EXP_HOST, EXP_PORT, EXP_AI_FAMILY, \ + EXP_AI_SOCKTYPE, EXP_AI_PROTOCOL) \ + INIT_ENTRY (ADDR, EXP_HOST, EXP_PORT, false, EXP_AI_FAMILY, \ + EXP_AI_SOCKTYPE, EXP_AI_PROTOCOL) + +/* Initialize an entry prefixed with "tcp4:". */ +#define INIT_PREFIXED_IPV4_TCP(ADDR, EXP_HOST, EXP_PORT) \ + INIT_PREFIXED_ENTRY (ADDR, EXP_HOST, EXP_PORT, AF_INET, SOCK_STREAM, \ + IPPROTO_TCP) + +/* Initialize an entry prefixed with "tcp6:". */ +#define INIT_PREFIXED_IPV6_TCP(ADDR, EXP_HOST, EXP_PORT) \ + INIT_PREFIXED_ENTRY (ADDR, EXP_HOST, EXP_PORT, AF_INET6, SOCK_STREAM, \ + IPPROTO_TCP) + +/* Initialize an entry prefixed with "udp4:". */ +#define INIT_PREFIXED_IPV4_UDP(ADDR, EXP_HOST, EXP_PORT) \ + INIT_PREFIXED_ENTRY (ADDR, EXP_HOST, EXP_PORT, AF_INET, SOCK_DGRAM, \ + IPPROTO_UDP) + +/* Initialize an entry prefixed with "udp6:". */ +#define INIT_PREFIXED_IPV6_UDP(ADDR, EXP_HOST, EXP_PORT) \ + INIT_PREFIXED_ENTRY (ADDR, EXP_HOST, EXP_PORT, AF_INET6, SOCK_DGRAM, \ + IPPROTO_UDP) + +/* Initialize a bogus entry, i.e., a connection spec that should + fail. */ +#define INIT_BOGUS_ENTRY(ADDR) \ + INIT_ENTRY (ADDR, "", "", true, 0, 0, 0) + +/* The variable which holds all of our tests. */ + +static const parse_conn_test conn_test[] = + { + /* Unprefixed addresses. */ + + /* IPv4, host and port present. */ + INIT_UNPREFIXED_ENTRY ("127.0.0.1:1234", "127.0.0.1", "1234"), + /* IPv4, only host. */ + INIT_UNPREFIXED_ENTRY ("127.0.0.1", "127.0.0.1", ""), + /* IPv4, missing port. */ + INIT_UNPREFIXED_ENTRY ("127.0.0.1:", "127.0.0.1", ""), + + /* IPv6, host and port present, no brackets. */ + INIT_UNPREFIXED_ENTRY ("::1:1234", "::1", "1234"), + /* IPv6, missing port, no brackets. */ + INIT_UNPREFIXED_ENTRY ("::1:", "::1", ""), + /* IPv6, host and port present, with brackets. */ + INIT_UNPREFIXED_IPV6_ENTRY ("[::1]:1234", "::1", "1234"), + /* IPv6, only host, with brackets. */ + INIT_UNPREFIXED_IPV6_ENTRY ("[::1]", "::1", ""), + /* IPv6, missing port, with brackets. */ + INIT_UNPREFIXED_IPV6_ENTRY ("[::1]:", "::1", ""), + + /* Unspecified, only port. */ + INIT_UNPREFIXED_ENTRY (":1234", "localhost", "1234"), + + /* Prefixed addresses. */ + + /* Prefixed "tcp4:" IPv4, host and port presents. */ + INIT_PREFIXED_IPV4_TCP ("tcp4:127.0.0.1:1234", "127.0.0.1", "1234"), + /* Prefixed "tcp4:" IPv4, only port. */ + INIT_PREFIXED_IPV4_TCP ("tcp4::1234", "localhost", "1234"), + /* Prefixed "tcp4:" IPv4, only host. */ + INIT_PREFIXED_IPV4_TCP ("tcp4:127.0.0.1", "127.0.0.1", ""), + /* Prefixed "tcp4:" IPv4, missing port. */ + INIT_PREFIXED_IPV4_TCP ("tcp4:127.0.0.1:", "127.0.0.1", ""), + + /* Prefixed "udp4:" IPv4, host and port present. */ + INIT_PREFIXED_IPV4_UDP ("udp4:127.0.0.1:1234", "127.0.0.1", "1234"), + /* Prefixed "udp4:" IPv4, only port. */ + INIT_PREFIXED_IPV4_UDP ("udp4::1234", "localhost", "1234"), + /* Prefixed "udp4:" IPv4, only host. */ + INIT_PREFIXED_IPV4_UDP ("udp4:127.0.0.1", "127.0.0.1", ""), + /* Prefixed "udp4:" IPv4, missing port. */ + INIT_PREFIXED_IPV4_UDP ("udp4:127.0.0.1:", "127.0.0.1", ""), + + + /* Prefixed "tcp6:" IPv6, host and port present. */ + INIT_PREFIXED_IPV6_TCP ("tcp6:::1:1234", "::1", "1234"), + /* Prefixed "tcp6:" IPv6, only port. */ + INIT_PREFIXED_IPV6_TCP ("tcp6::1234", "localhost", "1234"), + /* Prefixed "tcp6:" IPv6, only host. */ + //INIT_PREFIXED_IPV6_TCP ("tcp6:::1", "::1", ""), + /* Prefixed "tcp6:" IPv6, missing port. */ + INIT_PREFIXED_IPV6_TCP ("tcp6:::1:", "::1", ""), + + /* Prefixed "udp6:" IPv6, host and port present. */ + INIT_PREFIXED_IPV6_UDP ("udp6:::1:1234", "::1", "1234"), + /* Prefixed "udp6:" IPv6, only port. */ + INIT_PREFIXED_IPV6_UDP ("udp6::1234", "localhost", "1234"), + /* Prefixed "udp6:" IPv6, only host. */ + //INIT_PREFIXED_IPV6_UDP ("udp6:::1", "::1", ""), + /* Prefixed "udp6:" IPv6, missing port. */ + INIT_PREFIXED_IPV6_UDP ("udp6:::1:", "::1", ""), + + /* Prefixed "tcp6:" IPv6 with brackets, host and port present. */ + INIT_PREFIXED_IPV6_TCP ("tcp6:[::1]:1234", "::1", "1234"), + /* Prefixed "tcp6:" IPv6 with brackets, only host. */ + INIT_PREFIXED_IPV6_TCP ("tcp6:[::1]", "::1", ""), + /* Prefixed "tcp6:" IPv6 with brackets, missing port. */ + INIT_PREFIXED_IPV6_TCP ("tcp6:[::1]:", "::1", ""), + + /* Prefixed "udp6:" IPv6 with brackets, host and port present. */ + INIT_PREFIXED_IPV6_UDP ("udp6:[::1]:1234", "::1", "1234"), + /* Prefixed "udp6:" IPv6 with brackets, only host. */ + INIT_PREFIXED_IPV6_UDP ("udp6:[::1]", "::1", ""), + /* Prefixed "udp6:" IPv6 with brackets, missing port. */ + INIT_PREFIXED_IPV6_UDP ("udp6:[::1]:", "::1", ""), + + + /* Bogus addresses. */ + INIT_BOGUS_ENTRY ("tcp6:[::1]123:44"), + INIT_BOGUS_ENTRY ("[::1"), + INIT_BOGUS_ENTRY ("tcp6:::1]:"), + }; + +/* Test a connection spec C. */ + +static void +test_conn (const parse_conn_test &c) +{ + struct addrinfo hint; + parsed_connection_spec ret; + + memset (&hint, 0, sizeof (hint)); + + TRY + { + ret = parse_connection_spec (c.connspec, &hint); + } + CATCH (ex, RETURN_MASK_ERROR) + { + /* If we caught an error, we should check if this connection + spec was supposed to fail. */ + SELF_CHECK (c.should_fail); + return; + } + END_CATCH + + SELF_CHECK (!c.should_fail); + SELF_CHECK (ret.host_str == c.expected_result.host_str); + SELF_CHECK (ret.port_str == c.expected_result.port_str); + SELF_CHECK (hint.ai_family == c.exp_ai_family); + SELF_CHECK (hint.ai_socktype == c.exp_ai_socktype); + SELF_CHECK (hint.ai_protocol == c.exp_ai_protocol); +} + +/* Run the tests associated with parsing connection specs. */ + +static void +run_tests () +{ + for (const parse_conn_test &c : conn_test) + test_conn (c); +} +} /* namespace parse_connection_spec_tests */ +} /* namespace selftests */ + +void +_initialize_parse_connection_spec_selftests () +{ + selftests::register_test ("parse_connection_spec", + selftests::parse_connection_spec_tests::run_tests); +}
Locations
Projects
Search
Status Monitor
Help
OpenBuildService.org
Documentation
API Documentation
Code of Conduct
Contact
Support
@OBShq
Terms
openSUSE Build Service is sponsored by
The Open Build Service is an
openSUSE project
.
Sign Up
Log In
Places
Places
All Projects
Status Monitor
