Sign Up
Log In
Log In
or
Sign Up
Places
All Projects
Status Monitor
Collapse sidebar
SUSE:SLE-15-SP5:GA
ipxe
ipxe.changes
Overview
Repositories
Revisions
Requests
Users
Attributes
Meta
File ipxe.changes of Package ipxe
------------------------------------------------------------------- Mon Feb 6 17:47:32 UTC 2023 - Egbert Eich <eich@suse.com> - cross-aarch64-gcc7 is not available for SLE-15 (i586). Also, there is no Leap port for i586, so let's disable aarch64 cross-compile target on i586 (bsc#1207796). ------------------------------------------------------------------- Mon Jan 23 14:43:38 UTC 2023 - Christian Goll <cgoll@suse.com> - enable compressed images ------------------------------------------------------------------- Fri Jan 20 19:42:52 UTC 2023 - msuchanek@suse.com - Update to version 1.21.1+git20230120.a99e435c: * [efi] Do not rely on ProcessorBind.h when building host binaries (bsc#1207310) * multiple [ena] [efi] [tls] [intel] [intelxl] enhancements * [image] Do not clear current working URI when executing embedded image * [console] Fix definition of unreachability for remapped keys * [console] Add Swedish "se" keymap * [efi] Support keyboard remapping via the EFI console * [usb] Support keyboard remapping via the native USB keyboard driver * [ecm] Use ACPI-provided system-specific MAC address if present - Build on all architectures (jsc#PED-1148) ------------------------------------------------------------------- Thu Jan 19 13:31:56 UTC 2023 - Bernhard Wiedemann <bwiedemann@suse.com> - Make bootimgs subpackage architecture-specific ------------------------------------------------------------------- Mon Jun 20 08:35:31 UTC 2022 - Dominique Leuenberger <dimstar@opensuse.org> - Use the default gcc version in Tumbleweed builds. ------------------------------------------------------------------- Sun May 22 15:32:17 UTC 2022 - Ferdinand Thiessen <rpm@fthiessen.de> - Update to version 1.21.1+git20210908.02ec659b: * [acpi] Generalise DSDT/SSDT data extraction logic * [efi] Record cached ProxyDHCPOFFER and PXEBSACK, if present * [efi] Use zero for PCI vendor/device IDs when no applicable ID exists * [cloud] Retry DHCP aggressively in AWS EC2 * [efi] Match signtool expectations for file alignment * [libc] Allow for externally-defined LITTLE_ENDIAN and BIG_ENDIAN constants * [uri] Make URI schemes case-insensitive * [rdc] Add driver for RDC R6040 embedded NIC * [realtek] Work around hardware bug on RTL8211B * [cloud] Show ifstat output after a failed boot attempt * [peerdist] Assume that most recently discovered peer can be reused - Fixes build on Leap - Add workaround for building with GCC12 (Factory) ------------------------------------------------------------------- Sun May 22 15:08:10 UTC 2022 - Ferdinand Thiessen <rpm@fthiessen.de> - Fix version, base version, starting with 1.20.1+git20210604.065dce8d, was 1.21.1 not 1.20.1 as 1.21.1 was released December 2020. So current version is: 1.21.1+git20210614.bf4ccd42 ------------------------------------------------------------------- Thu Jun 17 09:12:05 UTC 2021 - Guillaume GARDET <guillaume.gardet@opensuse.org> - Since last update, syslinux is required to build the ISO but it is available only on x86*, so disable ISO build for non-x86* ------------------------------------------------------------------- Mon Jun 14 15:54:33 UTC 2021 - bwiedemann@suse.com - Update to version 1.20.1+git20210614.bf4ccd42: * [build] Ensure build ID is deterministic (boo#1047218) * [efi] Veto the Itautec Ip4ConfigDxe driver * [libc] Match standard prototype for putchar() * [base64] Include terminating NUL within base64 character array * [rndis] Fix size of reserved fields ------------------------------------------------------------------- Fri Jun 04 16:04:51 UTC 2021 - bwiedemann@suse.com - use xorrisofs for creating iso - Update to version 1.20.1+git20210604.065dce8d: * [ath5k] Avoid returning uninitialised data on EEPROM read errors * [crypto] Add memory output constraints for big-integer inline assembly * [build] Use SOURCE_DATE_EPOCH for isohybrid MBR ID if it exists * [build] Use SOURCE_DATE_EPOCH for .iso timestamps if it exists * [cpio] Split out bzImage initrd CPIO header construction * [x509] Use case-insensitive comparison for certificate names * [libc] Add strncasecmp() * [bnxt] Use hexadecimal values in PCI_ROM entries * [intel] Add PCI ID for I219-V and -LM 10 to 15 * [image] Support archive image formats independently of "imgextract" command * [image] Propagate trust flag to extracted archive images * [image] Allow single-member archive images to be executed transparently * [undi] Read TSC only when profiling * [rng] Check for TSC support before using RTC entropy source * [prefix] Specify i486 architecture for LZMA decompressor * [gzip] Add support for gzip archive images * [zlib] Add support for zlib archive images * [image] Add "imgextract" command for extracting archive images * [image] Provide image_set_len() utility function * [cloud] Allow multiple images to be imported simultaneously * [cloud] Attempt to include CPUID_SETTINGS only for x86 builds * [cloud] Autodetect CPU architecture from AMI disk image * [cloud] Use a sortable default AMI name * [cloud] Add ability to generate Dokuwiki table of AMI images * [settings] Add --timeout option to "read" command * [readline] Add an optional timeout to readline_history() * [build] Fix genfsimg to build ISO with long filenames * [xen] Avoid infinite loop on allocation failure in xenstore_response() * [xen] Support scatter-gather to allow for jumbo frames * [int13] Do not report INT 13 extension support for emulated floppies * [cloud] Enable "poweroff" command in cloud images * [netdevice] Ensure driver transmit() and poll() will not be re-entered * [pci] Avoid scanning nonexistent buses when using PCIAPI_DIRECT * [intel] Add additional PCI device ID to table * [dhcp] Handle DHCPNAK by returning to discovery state * [linux] Do not assume that stat() works on sysfs files * [linux] Validate length of ACPI table read from sysfs * [linux] Place -lslirp at end of linker search list * [linux] Use fstat() rather than statx() * [linux] Use generic sysfs mechanism to read SMBIOS + ACPI tables * [linux] Add a generic function for reading files from sysfs * [linux] Free cached ACPI tables on shutdown * [dns] Reduce debug verbosity for DNS server list * [linux] Allow arbitrary settings to be applied to Linux devices * [linux] Add missing pci_num_bus() stub * [slirp] Add libslirp driver for Linux * [linux] Provide ACPI settings via /sys/firmware/acpi/tables * [acpi] Allow for platforms that provide ACPI tables individually * [acpi] Eliminate redundant acpi_find_rsdt() in acpi_sx() * [acpi] Use a fixed colour for debug messages * [linux] Use host glibc system call wrappers * [linux] Add a prefix to all symbols to avoid future name collisions * [bitops] Provide an explicit operand size for bit test instructions * [librm] Test for FXSAVE/FXRSTOR instruction support * [librm] Add missing __asmcall on init_idt() * [prefix] Add a generic raw image prefix * [initrd] Allow for zero-length initrd files * [cloud] Do not enable serial console on EFI platforms * [pxe] Split out platform-independent portions of cachedhcp.c * [ath5k] Add missing AR5K_EEPROM_READ in ath5k_eeprom_read_turbo_modes * [cloud] Enable IPv6 and HTTPS in cloud boot images * [cloud] Add utility for importing images to AWS EC2 * [cloud] Use PCIAPI_DIRECT for cloud images * [ena] Switch to two-phase reset mechanism * [ci] Disable redundant scheduled execution of Coverity Scan * [ci] Disable Travis CI * [ci] Add GitHub action for Coverity Scan * [ci] Add GitHub action for build testing * [contrib] Update bochsrc.txt to work with current versions * [hermon] Add support for ConnectX-3 based cards * [autoboot] Avoid closing and immediately reopening network device * [hermon] Avoid parsing length field on completion errors * [hermon] Make hermon_dump_xxx() functions no-ops on non-debug builds * [hermon] Minimise reset time * [hermon] Throttle debug output when sensing port type * [hermon] Add a debug notice when initialization is complete * [hermon] Add support for port management event * [hermon] Adjust Ethernet work queue size * [hermon] Use reset value suitable for ConnectX-3 * [hermon] Clean up whitespace in hermon.c * [iscsi] Update link to iBFT reference manual * [hermon] Limit link poll frequency in DOWN state * [hermon] Perform clean MPT unmap on device shutdown * [hermon] Use Ethernet MAC as eIPoIB local EMAC * [hermon] Increase polling rate for command completions * [hermon] Add event queue debug functions * [hermon] Increase command timeout from 2 to 10 seconds * [hermon] Add assorted debug error messages * [hermon] Show "issuing command" messages only at DBGLVL_EXTRA * [hermon] Reorganize PCI ROM list and document well-known product names * [golan] Backport typo fix in nodnic_prm.h: s/HERMON/NODNIC/ * [arbel] Clean up whitespace in MT25218_PRM.h header * [hermon] Clean up whitespace in MT25408_PRM.h header * [image] Implicitly trust first embedded image * [infiniband] Require drivers to specify the number of ports * [ifmgmt] Make "ifstat" show the link-layer protocol for each netdev * [cmdline] Expose "iflinkwait" as a command * [image] Provide image_memory() * [travis] Update to current default build environment * [tftp] Allow for profiling of client and server turnaround times * [image] Add the "imgmem" command * [image] Provide image_set_data() * [ipv6] Defer router discovery timeout while link is blocked * [dhcp] Allow for links that remained blocked for up to three minutes * [eap] Treat an EAP Request-Identity as indicating a blocked link * [eapol] Replace EAPoL code * [dhcp] Continue transmitting DHCPDISCOVER while link is blocked * [isa] Add missing #include <config/isa.h> * [xhci] Avoid false positive Coverity warning * [xhci] Show meaningful error messages after command failures * [xhci] Fail attempts to issue concurrent commands * [smbios] Add support for the 64-bit SMBIOS3 entry point * [sfc] Update email addresses * [x509] Clarify debug message for an untrusted X.509 issuer * [golan] Add new PCI IDs * [iphone] Add iPhone tethering driver * [crypto] Allow private key to be specified as a TLS connection parameter * [tls] Include root of trust within definition of TLS session * [x509] Make root of trust a reference-counted structure * [x509] Record root of trust used when validating a certificate * [ocsp] Remove dummy OCSP certificate root * [http] Hide HTTP transport-layer filter implementation details * [asn1] Define ASN1_SHORT() for constructing short tagged values * [asn1] Rename ASN1_OID_CURSOR to ASN1_CURSOR * [asn1] Add constant for UTF-8 string tag * [tls] Allow provision of a client certificate chain * [tls] Use intf_insert() to add TLS to an interface * [interface] Provide intf_insert() to insert a filter interface * [interface] Ignore any attempts to plug in the null interface * [xhci] Update driver to use DMA API * [dma] Provide dma_umalloc() for allocating large DMA-coherent buffers * [netdevice] Fix misleading comment on netdev_rx() * [netdevice] Do not attempt to unmap a null I/O buffer * [dma] Move I/O buffer DMA operations to iobuf.h * [dma] Record DMA device as part of DMA mapping if needed * [dma] Modify DMA API to simplify calculation of medial addresses * [intelxl] Configure DMA mask as 64-bit * [intel] Configure DMA mask as 64-bit * [intelxl] Update driver to use DMA API * [intelxl] Read PCI bus:dev.fn number from PFFUNC_RID register * [intelxl] Read MAC address from PRTPM_SA[HL] instead of PRTGL_SA[HL] * [intel] Use physical addresses in debug messages * [realtek] Use physical addresses in debug messages * [intel] Update driver to use DMA API * [realtek] Update driver to use DMA API * [dma] Define a DMA API to allow for non-flat device address spaces * [malloc] Rename malloc_dma() to malloc_phys() * [realtek] Reset NIC when closing interface if using legacy mode * [infiniband] Allow SRP device to be described using an EFI device path * [fcp] Allow Fibre Channel device to be described using an EFI device path * [iscsi] Allow iSCSI device to be described using an EFI device path * [aoe] Allow AoE device to be described using an EFI device path * [http] Allow HTTP connection to be described using an EFI device path * [usbblk] Allow USB block device to be described using an EFI device path * [interface] Allow for the definition of an unused interface operation * [ipv6] Reduce time spent waiting for router discovery * [lacp] Ignore (and do not echo) trailing padding on received packets * [lacp] Detect and ignore erroneously looped back LACP packets * [usbblk] Add support for USB mass storage devices * [usb] Move usbio driver to end of USB driver list * [usb] Allow endpoints to be refilled to a specified upper limit * [usb] Allow device halt to be cleared independently of host controller * [ncm] Treat a zero divisor as indicating no alignment requirements * [usb] Avoid integer underflow on malformed string descriptors * [usb] Show debug message on device removal * [usb] Reset control endpoints immediately after failure * [pci] Update drivers to use pci_ioremap() * [pci] Define pci_ioremap() for mapping PCI bus addresses ------------------------------------------------------------------- Tue Sep 1 09:55:13 UTC 2020 - Dirk Mueller <dmueller@suse.com> - update url ------------------------------------------------------------------- Thu Aug 20 18:52:31 UTC 2020 - bwiedemann@suse.com - Update to version 1.20.1+git20200817.ef2c844d: * [efi] Attempt NII initialisation both with and without cable detection * [efi] Use device path to locate filesystem from which we were loaded * [efi] Match EDK2 numbering for USB ports * [comboot] Fix stack pointer retrieval after COM32 binary returns * [efi] Check the status code from AllocatePool() * [cmdline] Add "--timeout" parameter to "ifconf" command * [intelx] Added PCI_ROM entry for Intel x553/x557-AT and x553 (SFP+) NICs * [intel] Set INTEL_NO_PHY_RST on i218v * [intel] Add INTEL_NO_PHY_RST for I218LM * [deflate] Fix typo in comment describing length codes * [build] Fix a GNUism that FreeBSD's sed(1) cannot deal with * [wpa] Fix erroneous debug message in wpa_derive_ptk * [libc] Fix memcmp() to return proper values * [pcbios] Take alignment into account when checking for available space * [pcbios] Fix "out of memory" detection when expanding bottom area * [libgcc] Change __divmoddi4 from int64 [unknown] to int64_t * [build] Fix default target in sdsk image * [dns] Use all configured DNS servers * [xfer] Remove address family from definition of a socket opener * [sfc] Add PCI ID for Solarflare SFC9120 and Solarflare SFC9140 * [efi] Claim SNP devices early in efi_download_start() * [efi] Ensure NUL byte is at lowest address within stack cookie * [efi] Distribute available entropy within stack cookie * [libc] Add bit-rotation functions for unsigned long values * [efi] Avoid setting direction flag on EFI platforms * [libc] Provide an unoptimised generic_memcpy_reverse() * [crypto] Avoid temporarily setting direction flag in bigint_is_geq() * [usb] Leave port enabled after a failed device registration * [axge] Reapply USB device configuration when opening network device * [xhci] Increase link state settling delay to 100ms * [usb] Avoid unnecessary calls to usb_hub_set_drvdata() * [xhci] Set link state to RxDetect after disabling USB3 root hub port * [usb] Do not attempt to disable USB3 hub ports * [usb] Add missing usb_recycle() for completed hub interrupt transfers * [usb] Clear device endpoint halt before resetting host endpoint * [axge] Handle non-gigabit link speeds * [efi] Raise TPL during driver entry point * [efi] Detect and disable seriously broken EFI_RNG_PROTOCOL implementations * [build] Disable position-independent code for ARM64 EFI builds * [golan] Add explicit type casts for nodnic_queue_pair_type * [intel] Avoid spurious compiler warning on GCC 10 * [build] Be explicit about -fcommon compiler directive * [ocsp] Accept SHA1 certID responses even if SHA1 is not enabled * [efi] Enable stack protection where possible * [parseopt] Treat empty integer strings in user input as invalid * [util] Treat empty integer strings as invalid * [snp] Retry initialisation if link is reported as down * [crypto] Disable MD5 as an OID-identifiable algorithm by default * [crypto] Ensure that test code drags in required ASN.1 object identifiers * [crypto] Allow algorithms to be included without being OID-identifiable * [tls] Default to supporting only TLSv1.1 or above * [tls] Allow a minimum TLS protocol version to be specified * [efi] Attempt to connect our driver directly if ConnectController fails * [uri] Avoid appearing to access final byte of a potentially empty string * [efi] Work around UEFI specification bug in LoadImage for SAN boot * [efi] Work around UEFI specification bug in LoadImage * [png] Fix potential integer overflow * [bnxt] Add driver support for Broadcom NetXtreme-E Adapters * [efi] Disambiguate errors returned by ConnectController * [int13con] Create log partition only when CONSOLE_INT13 is enabled * [bios] Define macros for constructing partition table entries * [iscsi] Eliminate variable-length stack allocation in URI parsing * [iscsi] Eliminate variable-length stack allocations in CHAP handlers * [settings] Eliminate variable-length stack allocation * [slam] Allow for the possibility of IPv6 multicast addresses * [slam] Eliminate variable-length stack allocation * [infiniband] Eliminate variable-length stack allocation * [tftp] Eliminate unnecessary variable-length stack allocation * [travis] Ensure that most recent tag is always available * [build] Construct full version number automatically from git revision * [snp] Set EFI_SIMPLE_NETWORK_RECEIVE_MULTICAST bit as per UEFI spec * [snp] Try promiscuous multicast receive filter if the regular one fails * [peerdist] Allow for the use of a hosted cache server * [peerdist] Allow PeerDist to be globally enabled or disabled ------------------------------------------------------------------- Tue Jul 21 13:19:27 UTC 2020 - Guillaume GARDET <guillaume.gardet@opensuse.org> - Enable build on aarch64 ------------------------------------------------------------------- Fri Oct 25 12:34:08 UTC 2019 - Alberto Planas Dominguez <aplanas@suse.com> - Update cross compiler to GCC 9 - Change the git address from _service to use HTTPS - Replace %doc to %license ------------------------------------------------------------------- Fri Oct 25 12:28:49 UTC 2019 - aplanas@suse.com - Update to version 1.0.0+git20190929.3fe683eb: * [lan78xx] Always enable automatic speed and duplex detection * [efi] Do not attempt EFI_USB_IO_PROTOCOL transfers during shutdown * [efi] Report failed control transfers as expected by the USB core * [golan] Fix address-of-pointer bug for multicast attach/detach * [ethernet] Avoid false positive Coverity warning * [coverity] Override assumptions about wcrtomb() and hmac_init() * [crypto] Profile the various stages of modular multiplication * [crypto] Drag in configured digestInfo prefixes for any use of RSA * [tls] Add missing call to tls_tx_resume() when restarting negotiation * [peerdist] Limit number of concurrent raw block downloads ------------------------------------------------------------------- Thu Sep 12 11:59:33 UTC 2019 - bwiedemann@suse.com - Update to version 1.0.0+git20190817.0b3000bb: * [golan] Fix address-of-pointer bug for multicast attach/detach * [ethernet] Avoid false positive Coverity warning * [coverity] Override assumptions about wcrtomb() and hmac_init() * [crypto] Profile the various stages of modular multiplication * [crypto] Drag in configured digestInfo prefixes for any use of RSA * [tls] Add missing call to tls_tx_resume() when restarting negotiation * [peerdist] Limit number of concurrent raw block downloads * [peerdist] Start block download timers from within opener methods * [process] Add PROC_INIT() for initialising static processes * [build] Add predefined shortcut for Raspberry Pi builds * [build] Workaround compilation error with gcc 9.1 * [build] Fix "'%s' directive argument is null" error - Drop obsolete/upstream patches: * ipxe-aarch64-inline-asm-const-modifier.patch * ipxe-efi-guard-strncpy-with-gcc-warning-ignore-pragma.patch * ipxe-efi-recognize-plt32-relocation.patch ------------------------------------------------------------------- Tue Nov 27 07:44:32 UTC 2018 - eich@suse.com - Make sure correct cross-gcc version is picked: * For Leap15/SLE15: gcc7 * For oS Factory and TW: gcc8 ------------------------------------------------------------------- Fri Oct 12 15:16:39 UTC 2018 - jjolly@suse.com - Enable bin-arm64-efi/snp.efi cross-compile build This allows to boot an arm box from an x86_64 system. - Add ipxe-aarch64-inline-asm-const-modifier.patch * Fixes aarch64 build error with inline assembly output modifier ------------------------------------------------------------------- Thu Aug 23 14:55:18 UTC 2018 - jjolly@suse.com - Add snp-i386.efi and snp-x86_64.efi to package for using EFI's network drivers (e.g. used by warewulf) ------------------------------------------------------------------- Tue Aug 21 13:29:25 UTC 2018 - jjolly@suse.com - Add ipxe-efi-recognize-plt32-relocation.patch (boo#1105510) ------------------------------------------------------------------- Mon Jun 18 12:58:11 UTC 2018 - bwiedemann@suse.com - Add ipxe-efi-guard-strncpy-with-gcc-warning-ignore-pragma.patch (boo#1090355) ------------------------------------------------------------------- Sun Feb 18 12:38:31 UTC 2018 - jengelh@inai.de - Trim redundancies. Do mention presence of EFI programs. ------------------------------------------------------------------- Fri Feb 16 15:30:16 UTC 2018 - dmueller@suse.com - reduce build requires - update license ------------------------------------------------------------------- Fri Feb 16 10:44:22 UTC 2018 - bwiedemann@suse.de - Drop upstream 0001-arch-i386-Check-for-no-pie-gcc-option-as-well.patch - Update to version 1.0.0+git20180203.546dd51d: * [intel] Work around broken reset mechanism in i219 devices * [xhci] Assume an invalid PSI table if any invalid PSI value is observed * [ena] Fix spurious uninitialised variable warning on older versions of gcc * [netdevice] Make netdev_irq_enabled() independent of netdev_irq_supported() * [tg3] Add support for SerDes PHY initialization * [skel] Remove MII interface * [ena] Add driver for Amazon ENA virtual function NIC * [build] Avoid use of "ld --oformat binary" * [legal] Add missing FILE_LICENCE declarations * [image] Omit URI query string and fragment from download progress messages * [http] Report unsuccessful response status lines at DBGVL_LOG * [http] Include error messages for 4xx and 5xx response codes * [xen] Skip probing of any unsupported device types * [intel] Add PCI device ID for X550-T2 * [http] Add support for NTLM authentication * [http] Handle parsing of WWW-Authenticate header within authentication scheme * [http] Gracefully handle offers of multiple authentication schemes * [ntlm] Add support for NTLM authentication mechanism * [crypto] Add MD4 message digest algorithm * [crypto] Eliminate repetitions in MD5 round constant table * [crypto] Fix endianness typo in comment * [efi] Allow for building with older versions of elf.h system header * [efi] Accept (and ignore) R_ARM_V4BX relocations * [crypto] Fail fast if cross-certificate source is empty * [efi] Inhibit our driver Start() method during disconnection attempts * [build] Exclude selected directories from Secure Boot builds * [efi] Continue to connect remaining handles after connection errors * [exanic] Add PCI device ID for another X40 variant * [exanic] Power up optical PHYs (if present) * [dns] Ensure DNS names are NUL-terminated when used as diagnostic strings * [efi] Match behaviour of SnpDxe for truncated received packets * [efi] Check buffer length for packets retrieved via our SNP protocol * [dns] Report current DNS query as job progress status message * [resolv] Use pass-through interfaces for name resolution multiplexer * [netdevice] Add "hwaddr" setting * [peerdist] Gather and report peer statistics during download * [monojob] Display job status message, if present * [downloader] Allow underlying downloads to provide detailed job progress * [job] Allow jobs to report an arbitrary status message * [monojob] Check for job progress only once per timer tick * [netdevice] Cancel all pending transmissions on any transmit error * [efi] Raise TPL when calling UNDI entry point * [linux] Impose receive quota on tap driver * [malloc] Avoid false positive warnings from valgrind * [romprefix] Avoid unaligned accesses within ROM headers * [intel] Add various PCI device IDs * [shell] Enable "shell" command even when BANNER_TIMEOUT is zero * [hyperv] Do not steal ownership from the Gen 2 UEFI firmware * [acpi] Fix spurious uninitialised-variable warning on some gcc versions * [acpi] Compute and check checksum for ACPI tables * [build] Fix ARM32 EFI builds with current EDK2 headers * [build] Fix use of inline assembly on GCC 4.8 ARM64 builds * [build] Conditionalise use of -mabi=lp64 for ARM64 builds * [efi] Enumerate PCI BARs in same order as SnpDxe * [lan78xx] Add driver for Microchip LAN78xx USB Ethernet NICs * [smsc75xx] Expose functionality shared with LAN78xx devices * [smscusb] Allow for alternative PHY register layouts * [smscusb] Move non-inline register access functions to smscusb.c * [virtio] Support VIRTIO_NET_F_IOMMU_PLATFORM * [smscusb] Add ability to read MAC address from OTP * [smsc75xx] Use common SMSC USB device functionality * [smsc95xx] Use common SMSC USB device functionality * [smscusb] Abstract out common SMSC USB device functionality * [intel] Add support for I219-V in 7th Gen Intel NUC * [tls] Support RFC5746 secure renegotiation * [mucurses] Avoid potential division by zero * [usb] Use non-zero language ID to retrieve strings * [exanic] Add driver for Exablaze ExaNIC cards * [crypto] Expose pem_asn1() for use with non-image data * [crypto] Provide asn1_built() to construct a cursor from a builder * [crypto] Expose asn1_grow() * [crypto] Expose RSA_CTX_SIZE constant * [cpuid] Allow input %ecx value to be specified * [ecm] Display invalid MAC address strings in debug messages * [build] Use -no-pie on newer versions of gcc * [intel] Add INTEL_NO_PHY_RST for I219-V * [usb] Allow for USB network devices with no interrupt endpoint * [hdprefix] Avoid attempts to read beyond the end of the disk * [syslog] Handle backspace characters ------------------------------------------------------------------- Sun May 28 09:49:47 UTC 2017 - mchandras@suse.de - Update snapshot to ipxe-1.0.0+git20170523.356f6c1b. Some of the changes are: * [acpi] Expose ACPI tables via settings mechanism * [efi] Provide access to ACPI tables * [acpi] Make acpi_find_rsdt() a per-platform method * [efi] Prevent EFI code from being linked in to non-EFI builds * [block] Provide abstraction to allow system to be quiesced * [intel] Do not enable ASDE on i350 backplane NIC * [block] Allow use of a non-default EFI SAN boot filename * [thunderx] Use ThunderxConfigProtocol to obtain board configuration * [linux] Fix building with kernel 4.11 headers * [build] Avoid implicit-fallthrough warnings on GCC 7 * [http] Notify data transfer interface when underlying connection is ready * [block] Describe all SAN devices via ACPI tables * [block] Add basic multipath support * [vxge] Fix use of stale I/O buffer on error path * [pcnet32] Eliminate redundant register read * [rtl818x] Fix resource leak on error path * [sis190] Avoid NULL pointer dereference * [w89c840] Avoid potential array overrun * [tcp] Use correct length for memset() * [usb] Use correct length for memcpy() * [ath] Add missing break statements * [infiniband] Return status code from ib_create_mi() * [infiniband] Return status code from ib_create_cq() and ib_create_qp() * [mucurses] Attempt to fix resource leaks * [mucurses] Attempt to fix keypress processing logic * [mucurses] Attempt to fix test for empty string * [802.11] Remove redundant NULL pointer check after dereference * [nfs] Fix double free bug on error path * [xfer] Ensure va_end() is called on failure path * [arbel] Avoid potential integer overflow when calculating memory mappings * [hermon] Avoid potential integer overflow when calculating memory mappings * [thunderx] Don't disable NIC when exiting from iPXE * [thunderx] Fix hardware deinitialization * [http] Cleanly shut down potentially looped interfaces * [intel] Add INTEL_NO_PHY_RST for I219-LM (2) * [int13] Test correct return status from INT 13 calls * [int13] Avoid potential division by zero * [pic8259] Fix definitions for "read IRR" and "read ISR" commands * [cloud] Show CPU vendor and model in example cloud boot scripts * [netdevice] Allow MTU to be changed at runtime * [virtio] Use host-specified MTU when available * [virtio] Use separate RX and TX empty header buffers * [virtio] Remove queue size limit in legacy virtio * [virtio] Simplify virtqueue shutdown * [virtio] Cap queue size to MAX_QUEUE_NUM - Add patch to enable -no-pie when building i386 binaries. This was only triggered recently since the gcc-7.1.1 started using -fpie by default * 0001-arch-i386-Check-for-no-pie-gcc-option-as-well.patch ------------------------------------------------------------------- Thu Sep 1 15:34:40 UTC 2016 - mchandras@suse.de - Initial commit. We only build and package the iPXE boot images for now
Locations
Projects
Search
Status Monitor
Help
OpenBuildService.org
Documentation
API Documentation
Code of Conduct
Contact
Support
@OBShq
Terms
openSUSE Build Service is sponsored by
The Open Build Service is an
openSUSE project
.
Sign Up
Log In
Places
Places
All Projects
Status Monitor
