File 0002-bsc1221050-seccomp-patchbpf-rename-nativeA... of Package runc

Overview Repositories Revisions Requests Users Attributes Meta

File 0002-bsc1221050-seccomp-patchbpf-rename-nativeArch-linuxA.patch of Package runc (Revision 977affdd8945a68b8c8a023790a1d511)

Currently displaying revision 977affdd8945a68b8c8a023790a1d511 , Show latest

From de510c0c092bae47cdc1b54da25544c3e101e6ec Mon Sep 17 00:00:00 2001
From: Aleksa Sarai <cyphar@cyphar.com>
Date: Wed, 13 Mar 2024 13:40:16 +1100
Subject: [PATCH 2/3] bsc1221050: seccomp: patchbpf: rename nativeArch ->
 linuxAuditArch

(This is a backport of 6167f5ffc3e3fd53e6a41a2effa592a4873ad046.)

Calling the Linux AUDIT_* architecture constants "native" leads to
confusing code when we are getting the actual native architecture of the
running system.

Signed-off-by: Aleksa Sarai <cyphar@cyphar.com>
---
 libcontainer/seccomp/patchbpf/enosys_linux.go | 81 ++++++++++---------
 .../seccomp/patchbpf/enosys_linux_test.go     | 16 ++--
 2 files changed, 49 insertions(+), 48 deletions(-)

diff --git a/libcontainer/seccomp/patchbpf/enosys_linux.go b/libcontainer/seccomp/patchbpf/enosys_linux.go
index c9c1d4ccb685..1b67fda85c64 100644
--- a/libcontainer/seccomp/patchbpf/enosys_linux.go
+++ b/libcontainer/seccomp/patchbpf/enosys_linux.go
@@ -164,11 +164,11 @@ func disassembleFilter(filter *libseccomp.ScmpFilter) ([]bpf.Instruction, error)
 	return program, nil
 }
 
-type nativeArch uint32
+type linuxAuditArch uint32
 
-const invalidArch nativeArch = 0
+const invalidArch linuxAuditArch = 0
 
-func archToNative(arch libseccomp.ScmpArch) (nativeArch, error) {
+func scmpArchToAuditArch(arch libseccomp.ScmpArch) (linuxAuditArch, error) {
 	switch arch {
 	case libseccomp.ArchNative:
 		// Convert to actual native architecture.
@@ -176,48 +176,48 @@ func archToNative(arch libseccomp.ScmpArch) (nativeArch, error) {
 		if err != nil {
 			return invalidArch, fmt.Errorf("unable to get native arch: %w", err)
 		}
-		return archToNative(arch)
+		return scmpArchToAuditArch(arch)
 	case libseccomp.ArchX86:
-		return nativeArch(C.C_AUDIT_ARCH_I386), nil
+		return linuxAuditArch(C.C_AUDIT_ARCH_I386), nil
 	case libseccomp.ArchAMD64, libseccomp.ArchX32:
 		// NOTE: x32 is treated like x86_64 except all x32 syscalls have the
 		//       30th bit of the syscall number set to indicate that it's not a
 		//       normal x86_64 syscall.
-		return nativeArch(C.C_AUDIT_ARCH_X86_64), nil
+		return linuxAuditArch(C.C_AUDIT_ARCH_X86_64), nil
 	case libseccomp.ArchARM:
-		return nativeArch(C.C_AUDIT_ARCH_ARM), nil
+		return linuxAuditArch(C.C_AUDIT_ARCH_ARM), nil
 	case libseccomp.ArchARM64:
-		return nativeArch(C.C_AUDIT_ARCH_AARCH64), nil
+		return linuxAuditArch(C.C_AUDIT_ARCH_AARCH64), nil
 	case libseccomp.ArchMIPS:
-		return nativeArch(C.C_AUDIT_ARCH_MIPS), nil
+		return linuxAuditArch(C.C_AUDIT_ARCH_MIPS), nil
 	case libseccomp.ArchMIPS64:
-		return nativeArch(C.C_AUDIT_ARCH_MIPS64), nil
+		return linuxAuditArch(C.C_AUDIT_ARCH_MIPS64), nil
 	case libseccomp.ArchMIPS64N32:
-		return nativeArch(C.C_AUDIT_ARCH_MIPS64N32), nil
+		return linuxAuditArch(C.C_AUDIT_ARCH_MIPS64N32), nil
 	case libseccomp.ArchMIPSEL:
-		return nativeArch(C.C_AUDIT_ARCH_MIPSEL), nil
+		return linuxAuditArch(C.C_AUDIT_ARCH_MIPSEL), nil
 	case libseccomp.ArchMIPSEL64:
-		return nativeArch(C.C_AUDIT_ARCH_MIPSEL64), nil
+		return linuxAuditArch(C.C_AUDIT_ARCH_MIPSEL64), nil
 	case libseccomp.ArchMIPSEL64N32:
-		return nativeArch(C.C_AUDIT_ARCH_MIPSEL64N32), nil
+		return linuxAuditArch(C.C_AUDIT_ARCH_MIPSEL64N32), nil
 	case libseccomp.ArchPPC:
-		return nativeArch(C.C_AUDIT_ARCH_PPC), nil
+		return linuxAuditArch(C.C_AUDIT_ARCH_PPC), nil
 	case libseccomp.ArchPPC64:
-		return nativeArch(C.C_AUDIT_ARCH_PPC64), nil
+		return linuxAuditArch(C.C_AUDIT_ARCH_PPC64), nil
 	case libseccomp.ArchPPC64LE:
-		return nativeArch(C.C_AUDIT_ARCH_PPC64LE), nil
+		return linuxAuditArch(C.C_AUDIT_ARCH_PPC64LE), nil
 	case libseccomp.ArchS390:
-		return nativeArch(C.C_AUDIT_ARCH_S390), nil
+		return linuxAuditArch(C.C_AUDIT_ARCH_S390), nil
 	case libseccomp.ArchS390X:
-		return nativeArch(C.C_AUDIT_ARCH_S390X), nil
+		return linuxAuditArch(C.C_AUDIT_ARCH_S390X), nil
 	case libseccomp.ArchRISCV64:
-		return nativeArch(C.C_AUDIT_ARCH_RISCV64), nil
+		return linuxAuditArch(C.C_AUDIT_ARCH_RISCV64), nil
 	default:
 		return invalidArch, fmt.Errorf("unknown architecture: %v", arch)
 	}
 }
 
-type lastSyscallMap map[nativeArch]map[libseccomp.ScmpArch]libseccomp.ScmpSyscall
+type lastSyscallMap map[linuxAuditArch]map[libseccomp.ScmpArch]libseccomp.ScmpSyscall
 
 // Figure out largest syscall number referenced in the filter for each
 // architecture. We will be generating code based on the native architecture
@@ -234,17 +234,17 @@ func findLastSyscalls(config *configs.Seccomp) (lastSyscallMap, error) {
 		}
 
 		// Figure out native architecture representation of the architecture.
-		nativeArch, err := archToNative(arch)
+		auditArch, err := scmpArchToAuditArch(arch)
 		if err != nil {
 			return nil, fmt.Errorf("cannot map architecture %v to AUDIT_ARCH_ constant: %w", arch, err)
 		}
 
-		if _, ok := lastSyscalls[nativeArch]; !ok {
-			lastSyscalls[nativeArch] = map[libseccomp.ScmpArch]libseccomp.ScmpSyscall{}
+		if _, ok := lastSyscalls[auditArch]; !ok {
+			lastSyscalls[auditArch] = map[libseccomp.ScmpArch]libseccomp.ScmpSyscall{}
 		}
-		if _, ok := lastSyscalls[nativeArch][arch]; ok {
+		if _, ok := lastSyscalls[auditArch][arch]; ok {
 			// Because of ArchNative we may hit the same entry multiple times.
-			// Just skip it if we've seen this (nativeArch, ScmpArch)
+			// Just skip it if we've seen this (linuxAuditArch, ScmpArch)
 			// combination before.
 			continue
 		}
@@ -262,10 +262,11 @@ func findLastSyscalls(config *configs.Seccomp) (lastSyscallMap, error) {
 			}
 		}
 		if largestSyscall != 0 {
-			lastSyscalls[nativeArch][arch] = largestSyscall
+			logrus.Debugf("seccomp: largest syscall number for arch %v is %v", arch, largestSyscall)
+			lastSyscalls[auditArch][arch] = largestSyscall
 		} else {
-			logrus.Warnf("could not find any syscalls for arch %s", ociArch)
-			delete(lastSyscalls[nativeArch], arch)
+			logrus.Warnf("could not find any syscalls for arch %v", arch)
+			delete(lastSyscalls[auditArch], arch)
 		}
 	}
 	return lastSyscalls, nil
@@ -283,10 +284,10 @@ func findLastSyscalls(config *configs.Seccomp) (lastSyscallMap, error) {
 // close_range(2) which were added out-of-order in the syscall table between
 // kernel releases.
 func generateEnosysStub(lastSyscalls lastSyscallMap) ([]bpf.Instruction, error) {
-	// A jump-table for each nativeArch used to generate the initial
+	// A jump-table for each linuxAuditArch used to generate the initial
 	// conditional jumps -- measured from the *END* of the program so they
 	// remain valid after prepending to the tail.
-	archJumpTable := map[nativeArch]uint32{}
+	archJumpTable := map[linuxAuditArch]uint32{}
 
 	// Generate our own -ENOSYS rules for each architecture. They have to be
 	// generated in reverse (prepended to the tail of the program) because the
@@ -299,7 +300,7 @@ func generateEnosysStub(lastSyscalls lastSyscallMap) ([]bpf.Instruction, error)
 	}
 
 	// Generate the syscall -ENOSYS rules.
-	for nativeArch, maxSyscalls := range lastSyscalls {
+	for auditArch, maxSyscalls := range lastSyscalls {
 		// The number of instructions from the tail of this section which need
 		// to be jumped in order to reach the -ENOSYS return. If the section
 		// does not jump, it will fall through to the actual filter.
@@ -380,7 +381,7 @@ func generateEnosysStub(lastSyscalls lastSyscallMap) ([]bpf.Instruction, error)
 
 			// If we're on x86 we need to add a check for x32 and if we're in
 			// the wrong mode we jump over the section.
-			if uint32(nativeArch) == uint32(C.C_AUDIT_ARCH_X86_64) {
+			if uint32(auditArch) == uint32(C.C_AUDIT_ARCH_X86_64) {
 				// Generate a prefix to check the mode.
 				switch scmpArch {
 				case libseccomp.ArchAMD64:
@@ -409,8 +410,8 @@ func generateEnosysStub(lastSyscalls lastSyscallMap) ([]bpf.Instruction, error)
 			section = append(section, sectionTail...)
 		case 2:
 			// x32 and x86_64 are a unique case, we can't handle any others.
-			if uint32(nativeArch) != uint32(C.C_AUDIT_ARCH_X86_64) {
-				return nil, fmt.Errorf("unknown architecture overlap on native arch %#x", nativeArch)
+			if uint32(auditArch) != uint32(C.C_AUDIT_ARCH_X86_64) {
+				return nil, fmt.Errorf("unknown architecture overlap on native arch %#x", auditArch)
 			}
 
 			x32sysno, ok := maxSyscalls[libseccomp.ArchX32]
@@ -487,7 +488,7 @@ func generateEnosysStub(lastSyscalls lastSyscallMap) ([]bpf.Instruction, error)
 		programTail = append(section, programTail...)
 
 		// Update jump table.
-		archJumpTable[nativeArch] = uint32(len(programTail))
+		archJumpTable[auditArch] = uint32(len(programTail))
 	}
 
 	// Add a dummy "jump to filter" for any architecture we might miss below.
@@ -507,9 +508,9 @@ func generateEnosysStub(lastSyscalls lastSyscallMap) ([]bpf.Instruction, error)
 	//       architectures based on how large the jumps are going to be, or
 	//       re-sort the candidate architectures each time to make sure that we
 	//       pick the largest jump which is going to be smaller than 255.
-	for nativeArch := range lastSyscalls {
+	for auditArch := range lastSyscalls {
 		// We jump forwards but the jump table is calculated from the *END*.
-		jump := uint32(len(programTail)) - archJumpTable[nativeArch]
+		jump := uint32(len(programTail)) - archJumpTable[auditArch]
 
 		// Same routine as above -- this is a basic jeq check, complicated
 		// slightly if it turns out that we need to do a long jump.
@@ -518,7 +519,7 @@ func generateEnosysStub(lastSyscalls lastSyscallMap) ([]bpf.Instruction, error)
 				// jeq [arch],[jump]
 				bpf.JumpIf{
 					Cond:     bpf.JumpEqual,
-					Val:      uint32(nativeArch),
+					Val:      uint32(auditArch),
 					SkipTrue: uint8(jump),
 				},
 			}, programTail...)
@@ -527,7 +528,7 @@ func generateEnosysStub(lastSyscalls lastSyscallMap) ([]bpf.Instruction, error)
 				// jne [arch],1
 				bpf.JumpIf{
 					Cond:     bpf.JumpNotEqual,
-					Val:      uint32(nativeArch),
+					Val:      uint32(auditArch),
 					SkipTrue: 1,
 				},
 				// ja [jump]
diff --git a/libcontainer/seccomp/patchbpf/enosys_linux_test.go b/libcontainer/seccomp/patchbpf/enosys_linux_test.go
index e2d363a43bd3..bdfeff68adb3 100644
--- a/libcontainer/seccomp/patchbpf/enosys_linux_test.go
+++ b/libcontainer/seccomp/patchbpf/enosys_linux_test.go
@@ -23,7 +23,7 @@ type seccompData struct {
 }
 
 // mockSyscallPayload creates a fake seccomp_data struct with the given data.
-func mockSyscallPayload(t *testing.T, sysno libseccomp.ScmpSyscall, arch nativeArch, args ...uint64) []byte {
+func mockSyscallPayload(t *testing.T, sysno libseccomp.ScmpSyscall, arch linuxAuditArch, args ...uint64) []byte {
 	var buf bytes.Buffer
 
 	data := seccompData{
@@ -150,8 +150,8 @@ func testEnosysStub(t *testing.T, defaultAction configs.Action, arches []string)
 
 		for _, arch := range testArches {
 			type syscallTest struct {
-				syscall  string
 				sysno    libseccomp.ScmpSyscall
+				syscall  string
 				expected uint32
 			}
 
@@ -160,7 +160,7 @@ func testEnosysStub(t *testing.T, defaultAction configs.Action, arches []string)
 				t.Fatalf("unknown libseccomp architecture %q: %v", arch, err)
 			}
 
-			nativeArch, err := archToNative(scmpArch)
+			auditArch, err := scmpArchToAuditArch(scmpArch)
 			if err != nil {
 				t.Fatalf("unknown audit architecture %q: %v", arch, err)
 			}
@@ -179,9 +179,9 @@ func testEnosysStub(t *testing.T, defaultAction configs.Action, arches []string)
 					t.Fatalf("unknown syscall %q on arch %q: %v", syscall, arch, err)
 				}
 				syscallTests = append(syscallTests, syscallTest{
-					syscall,
-					sysno,
-					expected,
+					sysno:    sysno,
+					syscall:  syscall,
+					expected: expected,
 				})
 			}
 
@@ -233,7 +233,7 @@ func testEnosysStub(t *testing.T, defaultAction configs.Action, arches []string)
 					test.expected = retFallthrough
 				}
 
-				payload := mockSyscallPayload(t, test.sysno, nativeArch, 0x1337, 0xF00BA5)
+				payload := mockSyscallPayload(t, test.sysno, auditArch, 0x1337, 0xF00BA5)
 				// NOTE: golang.org/x/net/bpf returns int here rather
 				// than uint32.
 				rawRet, err := filter.Run(payload)
@@ -247,7 +247,7 @@ func testEnosysStub(t *testing.T, defaultAction configs.Action, arches []string)
 						t.Logf("  [%4.1d] %s", idx, insn)
 					}
 					t.Logf("payload: %#v", payload)
-					t.Errorf("filter %s(%d) %q(%d): got %#x, want %#x", arch, nativeArch, test.syscall, test.sysno, ret, test.expected)
+					t.Errorf("filter %s(%d) %q(%d): got %#x, want %#x", arch, auditArch, test.syscall, test.sysno, ret, test.expected)
 				}
 			}
 		}
-- 
2.44.0

Places

File 0002-bsc1221050-seccomp-patchbpf-rename-nativeArch-linuxA.patch of Package runc (Revision 977affdd8945a68b8c8a023790a1d511)

Places