File smartmontools.changes of Package smartmontools

Overview Repositories Revisions Requests Users Attributes Meta

File smartmontools.changes of Package smartmontools (Revision 29ac0e0e4d21dfd8194aacb7fd0dd802)

Currently displaying revision 29ac0e0e4d21dfd8194aacb7fd0dd802 , Show latest

-------------------------------------------------------------------
Wed Dec 12 19:47:57 CET 2012 - sbrabec@suse.cz

- Use sysconfig variables (sed on smartd.service.in) and generate
  smartd_opts for systemd smartd.service.
- Remove obsolete parsing of /etc/default/smartmontools
  (it is no more in upstream installation).

-------------------------------------------------------------------
Thu Nov 29 19:09:35 CET 2012 - sbrabec@suse.cz

- Verify GPG signature.

-------------------------------------------------------------------
Tue Nov 20 19:19:59 CET 2012 - sbrabec@suse.cz

- Re-introduce smartmontools-sysconfig.patch with
  SMARTD_SAVESTATES, SMARTD_ATTRLOG and SMARTD_EXTRA_OPTS sysconfig
  variables (bnc#790044).

-------------------------------------------------------------------
Thu Nov 15 17:10:02 CET 2012 - sbrabec@suse.cz

- Update to version 6.0 (bnc#789204):
  * option/directive '-F nologdir' and '-F xerrorlba'.
  * smartctl '--identify' option.
  * smartctl prints nominal media rotation rate (ATA).
  * smartctl prints SATA version and speed.
  * smartctl '-l sataphy' works for CD/DVD drives also.
  * smartctl '-x' includes ATA Device Statistics.
  * smartd warning emails include device identify info.
  * smartd '-d' output is flushed to support redirection.
  * Many HDD, SSD and USB additions to drive database.
  * smartctl options '-g, --get' and '-s, --set' to get/set various
    ATA settings: AAM, APM, Read look-ahead, Write cache, Security
    (freeze), Standby mode/timer.
  * smartd directive '-e' to set (most of) the above settings on
    startup.
  * smartctl options '-f hex' and '-f hex,[id|val]'.
  * smartctl does not start ATA self-test if another test is
    already running.  Override with new option '-t force'.
  * smartctl supports extended self-test polling times greater
    than 255 minutes.
  * Controller-independent SAT detection: '-d sat,auto[+TYPE]'.
  * smartd.conf DEFAULT directive.
  * Support for SATA disks behind Areca SAS RAID controllers and
    HP Smart Array controllers.

-------------------------------------------------------------------
Tue Nov  6 14:30:35 UTC 2012 - coolo@suse.com

- do no longer require syslog on 12.3, journal is enough for
  some installations

-------------------------------------------------------------------
Tue Sep 11 14:25:07 UTC 2012 - coolo@suse.com

- buildrequire systemd to have working rpm macros

-------------------------------------------------------------------
Thu May 31 20:25:44 UTC 2012 - sweet_f_a@gmx.de

- update to the _latest_ smartmontools-5.42 tarball, see
  http://sourceforge.net/mailarchive/message.php?msg_id=28262364
  "The PKG_PROG_PKG_CONFIG macro was not expanded in configure"
- remove automake dependency

-------------------------------------------------------------------
Tue Feb 21 19:32:51 CET 2012 - sbrabec@suse.cz

- Disable PIE for SLE9.

-------------------------------------------------------------------
Wed Nov 30 10:23:56 UTC 2011 - coolo@suse.com

- add automake as buildrequire to avoid implicit dependency

-------------------------------------------------------------------
Tue Nov 22 21:30:08 UTC 2011 - crrodriguez@opensuse.org

- When in a virtualized envirnment, hard disk monitoring
  with smartd is a task for the host, make systemd to skip
  the service if found running in such setup.

-------------------------------------------------------------------
Fri Oct 21 15:54:22 CEST 2011 - sbrabec@suse.cz

- Upgrade to version 5.42 (bnc#725631):
  * smartctl option '-l devstat' (Device Statistics).
  * smartctl option '-l ssd' (SSD endurance indicator).
  * smartd logs identify information of each SCSI/SAS device.
  * smartd resends warning emails if problem reappears.
  * smartd directives '-l offlinests' and '-l selfteststs'.
  * Many HDD, SSD and USB additions to drive database.
  * Platform-specific man pages.
  * smartd.8 man page no longer includes smartd.conf.5.
  * Support for Areca controllers enhanced.
- Fixed pid file location (bnc#714647).

-------------------------------------------------------------------
Mon Oct 10 14:24:33 UTC 2011 - bruno@ioda-net.ch

- reuse of %makeinstall to build for SLES11_SP1-

-------------------------------------------------------------------
Sun Oct  9 17:17:45 UTC 2011 - bruno@ioda-net.ch

- upgrade to 5.41 Date 2011-06-09
        - Failed self-tests outdated by a newer successful extended
          self-test are no longer reported as errors.
        - Support for ATA Long Logical/Physical Sectors (LLS/LPS).
        - 'smartctl --scan-open' can create a draft smartd.conf.
        - smartctl prints World Wide Name (WWN) of ATA device.
        - smartctl option '-f brief' to select new attribute output
          format which includes more flags and fits in 80 columns.
        - smartd logs identify information and WWN of each ATA device.
        - smartd logs warning from drive database if present.
        - smartd logs changes of offline data collection status.
        - smartd directive '-l scterc,READTIME,WRITETIME'.
        - smartd preserves last scheduled selective self-tests span.
        - 'smartd.service' file for systemd.
        - configure option '--with-systemdsystemunitdir'
        - configure option '--with-exampledir'.
        - configure searches for init.d or rc.d directory.
        - 'make install' does no longer overwrite an existing
          smartd.conf file.
        - 'update-smart-drivedb' does no longer require GNU sed.
        - Many HDD, SSD and USB additions to drive database.
        - Linux USB autodetection: Enable '-d sat,16' for newer kernels.
        - Linux megaraid: Fix segfault on non-data SCSI commands.
        - Linux megaraid: Fix pass-through of non-data ATA commands.
- clean up old patches included in upstream
- added systemd upstream configure option
- added patch for FSF-address
- clean up spec with spec-cleaner-

-------------------------------------------------------------------
Wed Jun  8 20:17:25 CEST 2011 - sbrabec@suse.cz

- Added sysconfig options to set arbitrary smartd options and
  disable persistent state writes and attribute log (FATE#310460).
- Decrease log message on unsupported state writes to DEBUG
  (FATE#310460).
- Change sysconfig ServiceReload to ServiceRestart, otherwise
  sysconfig changes will not take effect until restart.

-------------------------------------------------------------------
Mon Mar 21 16:48:36 UTC 2011 - coolo@novell.com

- licenses package is about to die

-------------------------------------------------------------------
Thu Feb  3 17:22:27 CET 2011 - pgajdos@suse.cz

- fixed smartctl -V command to show version [bnc#647521]
  * modified nobuild-date.patch

-------------------------------------------------------------------
Thu Jan 13 16:03:00 CET 2011 - sbrabec@suse.cz

- Removed support for SLE9 and older.

-------------------------------------------------------------------
Tue Dec  7 21:39:33 UTC 2010 - coolo@novell.com

- prereq init script syslog

-------------------------------------------------------------------
Thu Oct 21 18:29:39 CEST 2010 - ro@suse.de

- update to final 5.40
  - configure: '--enable-drivedb' is now the default.
  - Improved support for Intel SSDs.
  - Improved support for SandForce based SSDs.
  - Many additions to drive database.
  - smartctl option '-t vendor,N'.
  - Linux: Support SATA drives on LSI 3ware 9750 controllers.
  - Fix regression in smartd SMARTD_DEVICE and SMARTD_DEVICETYPE
    environment variables.

-------------------------------------------------------------------
Wed Oct  6 16:55:28 CEST 2010 - sbrabec@suse.cz

- Added rpmlintrc.
- Removed Obsoletes for ancient packages.
- Enabled attribute log.

-------------------------------------------------------------------
Tue Sep 28 17:20:37 UTC 2010 - cristian.rodriguez@opensuse.org

- Fix patch to remove build Dates
- Update to a newer version of 5.39.1 branch in order
  to support libcap-ng so smartd can drop privileges

-------------------------------------------------------------------
Sun Aug 29 18:56:43 UTC 2010 - cristian.rodriguez@opensuse.org

- Do not include build enviroment infon in the binaries
 including date and time of compilation, makes build-compare
 happier.

-------------------------------------------------------------------
Mon Jun 28 06:38:35 UTC 2010 - jengelh@medozas.de

- use %_smp_mflags

-------------------------------------------------------------------
Wed Feb 10 15:26:37 CET 2010 - sbrabec@suse.cz

- Updated to version 5.39.1:
  * Fix regression in smartctl option '-q, --quietmode'.
  * Fix regression in smartd directive '-l selftest'.
  * Linux: Allow smartd 'DEVICESCAN -d sat'.
  * Linux: Fix spin-up of SATA drive if '-n standby' is used
    (bnc#576662).
  * Support for up to 128 devices on 3ware controllers
  * smartctl option '-l xerror' to print ATA SMART Extended
    Comprehensive Error Log
  * Option '-d sat+TYPE' to use SAT with controllers which require
    '-d TYPE'
  * Option '-v ID,RAW_FORMAT,ATTR_NAME' to add new vendor specific
    attributes
  * Support for SSD drives using 64-bit raw attributes
  * Many additions to drive database
  * New simplified syntax for drive database
  * Configure option to add drive database file to distribution
  * smartd can now handle attributes 197 and 198 with increasing
    raw values
  * smartd logs changes of self-test execution status
  * smartd directive '-n powermode,N' to limit the number of
    skipped checks
  * smartd flag '!' for '-r' and '-R' directives to log changes as
    critical
  * Self-tests scheduled during system downtime or disk standby are
    run after next startup (bnc#469859).
  * smartd option '-s PREFIX' to store smartd internal state until
    next startup
  * smartd option '-A PREFIX' to log attributes at each check cycle
  * Configure options to enable the above by default
  * Change to an object oriented interface to access ATA and SCSI
    devices
  * Modules migrated to new interface
  * Rework of smartd data structures
  * Checkin date and SVN revision and optional BUILD_INFO printed
    in version info
  * SELinux fixes to 3ware device node creation
  * Use getaddrinfo() instead of gethostbyname() to support IPv6
  * Additional support for Samsung MLC flash drives

-------------------------------------------------------------------
Tue Feb  9 18:40:31 CET 2010 - sbrabec@suse.cz

- Changed daemon start policy from "force yes" to "default start"
  (bnc#567416).

-------------------------------------------------------------------
Mon Aug 10 19:07:54 CEST 2009 - sbrabec@suse.cz

- Updated to the latest SVN snapshot:
  * More drives recognized: Fujitsu MHW2 BJ series, WD Caviar Black
    family, Western Digital AV-GP series, Transcend Solid-State
    Drive and Transcend Solid-State Drive V series, Seagate
    Momentus 5400.5 series.
  * Fix data type bug in checksum test for multi sector logs.
  * Add USB ID of Seagate FreeAgent Go.
  * Add experimental feature to log attribute values at each check 
    cycle (ATA only).
  * Heads up about a non backwardly compatible change introduced in
    draft SAT-2 (sat2r8b.pdf) that will break our existing SAT
    processing code. Action needed if change stands.
  * smartctl: Don't report an attribute as failed if threshold is
    0.
  * Print only one warning on checksum errors in multi sector log.
  * Require to specify PORT parameter of '-d usbjmicron' if two
    disks are connected.
  * smartctl: Limit default number of printed entries for '-l
    xerror' to 8, for '-l xselftest' to 25.
  * smartctl: Fix number of entries in '-l xselftest' output.
  * Add USB IDs of a SunplusIT bridge, three WD drives, and an
    unsupported Iomega drive.
  * smartd: Add '!' flag to '-r' and '-R' directives. If specified,
    message is logged as LOG_CRIT and warning mail is sent if
    attribute normalized or raw value changes.
  * Add names for some attributes used in Samsung MLC drives:
    178-180 & 183
  * smartctl: Add option '-x, --xall' to print all info including
    extended SMART logs and non-SMART info.
  * smartctl: Add '-l xerror,error' and '-l xselftest,selftest' to
    print the old logs if the extended logs are not supported.
  * Disable 48-bit ATA commands for JMicron USB bridges by default.
  * smartd: Don't ignore the '-n' directive when a self-test is
    scheduled.
  * SCSI (SAS): implement '-l sasphy,reset'.
  * SCSI (SAS): add '-l sasphy' and '-l sasphy,reset' into smartctl.
  * Print General Purpose Logs even if GPL feature bit is missing.

-------------------------------------------------------------------
Sat Jul 18 20:22:38 CEST 2009 - dominique-obs@leuenberger.net

- bootstrap with automake-1.11

-------------------------------------------------------------------
Wed Jun  3 19:19:55 CEST 2009 - sbrabec@suse.cz

- Updated to the latest CVS snapshot:
  * SCSI: Fetch load-unload cycle counts
  * smartd: Fix '-M test' directive in conjunction with '-s'
  * knowndrives updates
  * Add '+' modifier to smartd '-C' and '-U' directives
  * Add experimental option '-d usbsunplus' for drives behind
    SunplusIT USB bridges.
  * Add smartctl '-d test' option
  * Add experimental USB device type autodetection
  * Add new SMART STATUS check command for JMicron USB bridges
  * Add smartctl option '-l xerror[,NUM]'
  * Accept half healthy (and half unhealthy) indication from the
    SMART RETURN STATUS.
  * Workaround for huge raw values of Reallocated_Sector_Ct and
    Reallocated_Event_Ct for newer Fujitsu disks.

-------------------------------------------------------------------
Wed Feb 11 17:01:58 CET 2009 - sbrabec@suse.cz

- Enabled selinux support only for supported platforms.
- Removed support for SLE9 (no more compilable).

-------------------------------------------------------------------
Thu Nov 27 14:35:11 CET 2008 - sbrabec@suse.cz

- smartd_opts migrated to sysconfig (bnc#448205).

-------------------------------------------------------------------
Fri Oct 24 18:12:18 CEST 2008 - sbrabec@suse.cz

- Updated to the latest CVS snapshot:
  * DEVICESCAN works again with SATA (bnc#436567)
  * knowndrives updates, now using full regexps
  * support for local drive database entries from optional file
  * support for scheduled self tests
  * smartd persistent state and delayed test scheduling support
  * support for disks behind MegaRAID controllers
  * Improve min/max temperature recording in conjunction with '-s'.
  * new options to -l
  * code cleanup and other fixes
- Init script updated to support "unused" state (bnc#436567).
- Added "rescan" to the init script to force rescanning of devices.
- Enabled selinux support to create /dev/tw[ae] with correct
  contexts.

-------------------------------------------------------------------
Tue Sep  2 14:44:40 CEST 2008 - sbrabec@suse.cz

- Desktop neutral powersave-notify is no longer available.
  Use "wall" to report expected disc failures.

-------------------------------------------------------------------
Mon Aug 18 17:26:44 CEST 2008 - sbrabec@suse.cz

- Updated to the latest CVS snapshot:
  * Areca device support.
  * More discs recognized.
  * Code improvements to simplify adding new platforms and devices.

-------------------------------------------------------------------
Fri May 23 14:06:32 CEST 2008 - sbrabec@suse.cz

- Updated to the latest CVS snapshot:
  * USB Cypress device support in smartd (bnc#387094).
- Fixed help strings regarding the USB Cypress support.
- Do not report errors after disconnecting of removable discs
  (bnc#308557).

-------------------------------------------------------------------
Tue May  6 12:43:16 CEST 2008 - sbrabec@suse.cz

- Updated to the latest CVS snapshot (bnc#387094):
  * USB Cypress device support.
  * 3ware support improvements.

-------------------------------------------------------------------
Mon Mar 10 12:42:15 CET 2008 - sbrabec@suse.cz

- Updated to version 5.38:
  * smartd.initd.in addition
  * On Linux, DEVICESCAN now automatically recognizes SATA devices
    behind libata, and SATA devices behind the Marvell driver.
  * On Linux, a '-d sat' or '-d marvell' is automatically added
    if libata or the marvell driver are recognized behind a SCSI
    device type
  * SAT device type + SCSI generic devices work properly with
    smartd under Linux
  * Many additions to drive database
  * Some ATA-8 updates
  * Dragonfly support
  * Fixed some ATA identity byte swap problems on big endian CPUs
  * No-fork option added to smartd
  * 3ware support for controllers with more disks (32 max)
  * Improved SMART Attribute list and descriptions
  * Fix to smartctl return codes
  * Fix to scheduled tests on Highpoint RAID controllers
  * New samsung firmware bug workaround option
  * Auto-offline and Auto-save fixed in Linux + libata
  * Solaris: better SCSI support
  * Fixed and improvements to CCISS support
  * More options for SCSI temperature monitoring and history
  * Additional command line options for selective self-tests
  * Compilation fixes for various platforms.

-------------------------------------------------------------------
Tue Oct  9 11:46:01 CEST 2007 - sbrabec@suse.cz

- Updated to the CVS version (#326738):
  * Supports SAS discs behind CCISS RAID.
- Removed bogus patch breaking HighPoint RAID (#225639).

-------------------------------------------------------------------
Wed Aug 22 13:14:42 CEST 2007 - sbrabec@suse.cz

- Worked around missing %restart_on_update in older versions.
- Build correctly in older SuSE versions.

-------------------------------------------------------------------
Tue Jul 24 18:34:34 CEST 2007 - sbrabec@suse.cz

- Updated to version 5.37:
  * Rely on general SAT code instead of Linux specific.
  * Increased max line length 128 to 256 characters.
  * Added new items into drive database.
  * Fixed inclusion of PRI?64 macros from inttypes.h.
  * Fix selective self test log revision number.
  * Compile fix for SuSE.
- Really start smartd by default on new enough kernels (#201715).
- Fixed behavior for SATA discs (#225639).

-------------------------------------------------------------------
Mon Mar  5 11:54:35 CET 2007 - pgajdos@suse.cz

- fixed 'array subscript is above array bounds' (#239956)

-------------------------------------------------------------------
Mon Jan 22 10:33:05 CET 2007 - ssommer@suse.de

- fix build for automake-0.9b

-------------------------------------------------------------------
Thu Jan 18 15:09:45 CET 2007 - ssommer@suse.de

- support building with automake-1.10

-------------------------------------------------------------------
Wed Oct 25 12:11:17 CEST 2006 - sbrabec@suse.cz

- Updated to the today CVS version:
  * Supports SATA devices scanning out of the box (#201715#c9).
  * Supports SATA devices behind SCSI ATA Translation layer.
  * Supports SATA drives behind HighPoint Raid controllers.
  * Supports HP SmartArray RAID controller (cciss) (#186013).
- Updated SATA support stuff.
- Start smartd by default on new enough kernels (#201715).

-------------------------------------------------------------------
Wed Sep 13 17:56:12 CEST 2006 - sbrabec@suse.cz

- Integrated with powersave.
- Use upstream init script.

-------------------------------------------------------------------
Thu Sep  7 17:24:49 CEST 2006 - sbrabec@suse.cz

- Updated to version 5.36:
  * Additions to the table of known drives.
  * Works 'out of the box' with Linux SATA libata.
  * smartd option added to list test schedules.
  * smartctl option added to list part of drive database.
  * Various improvements for SCSI disks and logs.
  * Printing of drive family info.
  * SCSI disks: output size of grown defect list.
  * Added info about drive family to 'smartctl -i' output.
  * Added option ',q' for smartd '-n' directive to suppress
    'skipping checks' message which may spin up laptop disk.
  * Added message if smartd '-n' check power mode spins up disk.

-------------------------------------------------------------------
Wed Jan 25 21:41:41 CET 2006 - mls@suse.de

- converted neededforbuild to BuildRequires

-------------------------------------------------------------------
Tue Jun 21 01:17:39 CEST 2005 - ro@suse.de

- use RPM_OPT_FLAGS
- build with fPIE/pie

-------------------------------------------------------------------
Fri Mar 18 14:49:58 CET 2005 - sbrabec@suse.cz

- Additional information on SATA support.

-------------------------------------------------------------------
Tue Feb 22 14:18:47 CET 2005 - sbrabec@suse.cz

- Added comments on temperature data in smartd.conf (#50156).

-------------------------------------------------------------------
Mon Jan 24 16:30:15 CET 2005 - sbrabec@suse.cz

- Updated to version 5.33.

-------------------------------------------------------------------
Mon Jan 03 15:14:31 CET 2005 - sbrabec@suse.cz

- Fixed missing pid reference in init script (#49546).
- Updated README.SATA.

-------------------------------------------------------------------
Fri Aug 27 15:25:36 CEST 2004 - sbrabec@suse.cz

- Updated to version 5.32.

-------------------------------------------------------------------
Sun Jun  6 13:23:35 CEST 2004 - lmuelle@suse.de

- Update to version 5.31.
- Add stop_on_removal to preun and restart_on_update to postun.

-------------------------------------------------------------------
Sun Apr 25 16:40:02 CEST 2004 - lmuelle@suse.de

- Add reload and condrestart to init script; [#39425].

-------------------------------------------------------------------
Mon Mar 08 11:46:56 CET 2004 - sbrabec@suse.cz

- Updated to version 5.30.

-------------------------------------------------------------------
Fri Mar 05 17:26:02 CET 2004 - sbrabec@suse.cz

- Added README.SATA.
- Added %build section.

-------------------------------------------------------------------
Tue Mar 02 11:09:18 CET 2004 - sbrabec@suse.cz

- Updated to version 5.29.

-------------------------------------------------------------------
Mon Jan 12 10:50:27 CET 2004 - adrian@suse.de

- build as user

-------------------------------------------------------------------
Fri Jan  9 20:11:08 CET 2004 - mmj@suse.de

- Updated to version 5.26

-------------------------------------------------------------------
Fri Aug 22 13:20:40 CEST 2003 - sbrabec@suse.cz

- Updated to version 5.1-18.

-------------------------------------------------------------------
Thu Aug 21 17:14:08 CEST 2003 - sbrabec@suse.cz

- Updated to version 5.1-17.

-------------------------------------------------------------------
Mon Aug 11 09:53:05 CEST 2003 - sbrabec@suse.cz

- Added $sendmail to X-UnitedLinux-Should-Start.

-------------------------------------------------------------------
Thu Aug 07 14:45:17 CEST 2003 - sbrabec@suse.cz

- Updated to version 5.1.16.

-------------------------------------------------------------------
Wed May 21 11:59:42 CEST 2003 - sbrabec@suse.cz

- Updated to version 5.1.9.
- Fixed RPM file attributes.

-------------------------------------------------------------------
Wed Mar 26 12:33:38 CET 2003 - sbrabec@suse.cz

- Updated to version 5.1.9.

-------------------------------------------------------------------
Mon Jan 27 11:08:57 CET 2003 - sbrabec@suse.cz

- Updated to version 5.1.4.

-------------------------------------------------------------------
Mon Jan 13 16:06:59 CET 2003 - sbrabec@suse.cz

- Updated to version 5.1.1.

-------------------------------------------------------------------
Tue Dec 10 18:11:21 CET 2002 - sbrabec@suse.cz

- Updated to version 5.0.49.

-------------------------------------------------------------------
Mon Nov 25 14:01:29 CET 2002 - sbrabec@suse.cz

- Fixed SuSE specific things in docs and manual pages.

-------------------------------------------------------------------
Mon Nov 18 12:02:24 CET 2002 - sbrabec@suse.cz

- New package.

Places

File smartmontools.changes of Package smartmontools (Revision 29ac0e0e4d21dfd8194aacb7fd0dd802)

Places