openSUSE Build Service

Overview Repositories Revisions Requests Users Attributes Meta

File mdadm.changes of Package mdadm (Revision 125df49ffda8a0a19f18e617ff394635)

Currently displaying revision 125df49ffda8a0a19f18e617ff394635 , Show latest

-------------------------------------------------------------------
Thu Jun 21 15:58:37 CEST 2007 - adrian@suse.de

- fix changelog entry order

-------------------------------------------------------------------
Mon Apr  2 15:00:10 CEST 2007 - mmarek@suse.cz

- updated to 2.6.1
  * --monitor was producing some meaningless warnings due to a bug.
  * Fix some compiler warnings.
  * Fully support --grow for raid6.  If a reshape crashed during
    the critical period, mdadm wouldn't restore the Q information
    properly.
  * Update documentation for --grow.
  * Report bitmap status in --detail and --examine
  * Default to v1 superblocks instead of v0.90 if the array
    is too big for 0.90 to handle.
  * Sort the output of "mdadm --detail --scan" so that it is
    in a suitable order for assembling arrays. i.e. components come
    before an array that they are part of.
  * Require bitmap files to have a '/' in their name.
  * Rewrite 'reshape' support including performing a backup
    of the critical region for a raid5 growth, and restoring that
    backup after a crash.
  * Put a 'canary' at each end of the backup so a corruption
    can be more easily detected.
  * Support --backup-file for backing-up critical section during
    growth.
  * Erase old superblocks (of different versions) when creating new
    array.
  * Allow --monitor to work with arrays with >28 devices
  * Report reshape information in --detail
  * Handle symlinks in /dev better
  * Fix mess in --detail output which a device is missing.
  * Support 'bitmap=' in mdadm.conf for auto-assembling arrays with
    write-intent bitmaps in separate files.
  * Fix alignment problem in version-1 superblocks.
    NOTE: This is an incompatable change affecting raid5 reshape.
    If you want to reshape a raid5 using version-1 superblocks,
    use 2.6.17-rc2 or later, and mdadm-2.4.1 or later.
  * Support 'mailfrom' line in mdadm.conf so the From: line in alert
    emails can be explicitly set.
  * Arrange that SparesMissing (which is similar in import to
    DegradedArray) generates an Email.
  * Assume "DEVICE partitions" if no DEVICE line is given.
  * Support new 'offset' layout for raid10.
  * When creating a bitmap file, choose a chunksize to limit number
    of bitmap chunks to 2 million.  More than this can cause kmalloc
    failure.
  * New 'CREATE' line in mdadm.conf for defaults such as owner, group,
    mode and auto-flag
  * --detail checks if array has been started or not and includes that
    in report.
  * When using --update=uuid on an array with a bitmap, update the
    bitmap's uuid too.
  * Add a copy of /proc/mdstat to the mail message sent by mdadm
    --monitor.
  * New flag --no-degraded to avoid starting arrays if there are
    fewer devices available than last time the array was started.
    This is only needed with --scan, as with --scan, that behaviour
    is the default.
  * Support for 'homehost' concept.  This is a fairly major update.
    It includes a configfile option and a command line option for
    specifying a homehost, records that host in the superblock,
    and reports the homehost where possible.
  * Support for Auto Assembly.  "mdadm -As" will, if provided with
    the name of a homehost, try to assemble all arrays it can find
    that were created for that homehost.  See man pages for more details.
  * Don't try to create devices with --manage or --grow
  * allow default metadata (superblock) type to be specified
    in mdadm.conf
  * Avoid some misdetection of overlapping partitions
  * Add 'Array Slot' line to --examine for version-1 superblocks
    to make it a bit easier to see what is happening.
  * Work around bug in --add handling for  version-1 superblocks
    in 2.6.17 (and prior).
  * Make -assemble a bit more resilient to finding strange
    information in superblocks.
  * When creating devices in /dev/md/ create matching symlinks
    from /dev.  e.g. /dev/md0 -> /dev/md/0.
    Allow this to be disabled in mdadm.conf or on command line.
  * Allow a number (of partitions) after the 'yes' option to --auto=
    This is particularly useful in the 'create' line in mdadm.conf.
  * Remove partitions from any whole device that is made part of
    an md array.  This is a work-around for annoying messages
    when the first block on some drive accidentally looks like a
    partition table.
  * Close stray fd in mdassemble so that it can assemble stacked
    devices
  * If mdassemble finds an array already assembled, it marks it
    read-write.
  * Remove error in md_open if array is already active.  This isn't
    needed and gets in the ways if an array was created e.g. in
    initramfs, but device doesn't yet exist in /dev.
  * When --assemble --scan is run, if all arrays that could be found
    have already been started, don't report an error.
  * Allow --assemble --force to mark a raid6 clean when it has two
    missing devices (which is needed else if won't assemble.
    Without this fix it would only assemble if one or zero
    missing devices.
  * Support --update=devicesize for cases where the underlying device
    can change size.
  * Default to --auto=yes so the array devices with 'standard' names
    get created automatically, as this is almost always what is wanted.
  * Give useful message if raid4/5/6 cannot be started because it is
    not clean and is also degraded.
  * Increase raid456 stripe cache size if needed to --grow the array.
    The setting used unfortunately requires intimate knowledge of the
    kernel, and it not reset when the reshape finishes.
  * Change 'Device Size' to 'Used Dev Size' because it only shows how
    much of each device is actually used, not how big they are.
  * --wait or -W will wait for resync activity to finish on the given
    devices.
  * If two drives in a raid5 disappear at the same time, then "-Af"
    will add them both in rather than just one and forcing the array
    to 'clean'.  This is slightly safer in some cases.
  * Don't hold md device open for so long in --monitor mode - map_dev
    can be slow and interferes with trying to stop the array.
  * Support --uuid= with --create to choose your own UUID.
  * New major more "--incremental" for incremental assemble of arrays,
    intended for use with udev.
  * lots of bugfixes
  * manpage updates

-------------------------------------------------------------------
Wed Jan 10 11:58:14 CET 2007 - mmarek@suse.cz

- use raidautorun instead of mdrun to autodetect the raid arrays in
  boot.md [#230733]

-------------------------------------------------------------------
Wed Nov  8 10:51:13 CET 2006 - prusnak@suse.cz

- fixed subscript out of range [#212697]

-------------------------------------------------------------------
Wed Sep 20 17:17:22 CEST 2006 - mjancar@suse.cz

- update to 2.5.3
  * lots bugfixes
  * drop all patches (integrated upstream)

-------------------------------------------------------------------
Fri Jul 28 13:12:47 CEST 2006 - olh@suse.de

- remove dropped boot.ibmsis from boot.md
- boot.rootfsck should start before boot.md (#181972)

-------------------------------------------------------------------
Fri Jul 21 14:16:28 CEST 2006 - olh@suse.de

- remove boot.proc from Required-Start: in boot.md (#178753)

-------------------------------------------------------------------
Wed May  3 13:12:42 CEST 2006 - mjancar@suse.cz

- fix false SparesMissing error (#171326)

-------------------------------------------------------------------
Wed Apr 26 09:46:28 CEST 2006 - hare@suse.de

- Fix init script dependencies
- Implement MDADM_DEVICE_TIMEOUT to set a timeout for 
  udevsettle (#149979)

-------------------------------------------------------------------
Tue Apr 25 13:39:38 CEST 2006 - mjancar@suse.cz

- add static device nodes for udev (#168824)

-------------------------------------------------------------------
Wed Apr 19 10:27:19 CEST 2006 - mjancar@suse.cz

- set $BOOT_MD_USE_MDADM_CONFIG to "yes" by default (#155120)

-------------------------------------------------------------------
Fri Apr  7 11:33:15 CEST 2006 - mjancar@suse.cz

- detach mdadmd from tty in rcmdadmd (#160881)

-------------------------------------------------------------------
Mon Apr  3 09:54:55 CEST 2006 - mjancar@suse.cz

- fix garbled output with --detail (#160827)
- fix fix write-mostly with --add and --re-add (#162968)

-------------------------------------------------------------------
Fri Mar 24 21:31:54 CET 2006 - mjancar@suse.cz

- add /sbin/raidautorun (#159460)

-------------------------------------------------------------------
Wed Mar  8 18:33:12 CET 2006 - mjancar@suse.cz

- add $BOOT_MD_USE_MDADM_CONFIG sysconfig variable (#155120)

-------------------------------------------------------------------
Thu Feb  9 16:59:52 CET 2006 - mjancar@suse.cz

- round free size to chunk size multiply on --create (#148562)

-------------------------------------------------------------------
Tue Feb  7 08:59:50 CET 2006 - mjancar@suse.cz

- move boot.multipath to Should-Start instead of Required-Start

-------------------------------------------------------------------
Mon Feb  6 15:27:47 CET 2006 - mjancar@suse.cz

- add "Obsoletes: raidtools"
- start boot.md after boot.multipath
- call mdadm without -a from mdrun, an argument is required in 2.2

-------------------------------------------------------------------
Mon Feb  6 11:36:26 CET 2006 - mjancar@suse.de

- don't start mdadmd by default

-------------------------------------------------------------------
Sun Feb  5 20:46:43 CET 2006 - mjancar@suse.cz

- include option for email to be sent on start (#142105)
- fix missing md autostart due to raidtools dropped (#148234)
  * include mdrun script from Debian
  * create boot.md initscipt

-------------------------------------------------------------------
Sun Feb  5 17:46:32 CET 2006 - schwab@suse.de

- Fix memset parameters.

-------------------------------------------------------------------
Thu Feb  2 12:30:26 CET 2006 - mjancar@suse.cz

- fix segfault on --assemble (#146514)

-------------------------------------------------------------------
Fri Jan 27 02:12:42 CET 2006 - mls@suse.de

- converted neededforbuild to BuildRequires

-------------------------------------------------------------------
Wed Jan 25 10:48:18 CET 2006 - olh@suse.de

- fix uninitialized variable, memset call and memcmp/memcpy bug
  mdadm.bug144647-array.init.patch
  mdadm.bug144647-update_super1-memcpy.patch
  mdadm.bug144647-add_internal_bitmap0-memcpy.patch

-------------------------------------------------------------------
Wed Jan 11 13:49:54 CET 2006 - mjancar@suse.cz

- update ro 2.2

-------------------------------------------------------------------
Tue Dec 20 12:57:25 CET 2005 - ro@suse.de

- at least output errors if they occur (instead of ignoring)

-------------------------------------------------------------------
Wed Nov 30 17:19:24 CET 2005 - schwab@suse.de

- Fix broken formats.

-------------------------------------------------------------------
Tue Oct 25 09:53:57 CEST 2005 - aj@suse.de

- Build with -fno-strict-aliasing.

-------------------------------------------------------------------
Wed Oct 12 20:18:00 CEST 2005 - mjancar@suse.cz

- update to 2.1

-------------------------------------------------------------------
Thu Jul 28 20:28:32 CEST 2005 - anicka@suse.cz

- update to 1.12.0

-------------------------------------------------------------------
Wed Jun 15 13:16:42 CEST 2005 - meissner@suse.de

- use RPM_OPT_FLAGS correctly.

-------------------------------------------------------------------
Tue Apr 19 13:48:24 CEST 2005 - postadal@suse.de

- updated to version 1.11.0
- fixed for gcc 4.0
- removed obsoleted patch config-fix

-------------------------------------------------------------------
Wed Mar 30 13:24:23 CEST 2005 - postadal@suse.cz

- fixed parsing command line option '--config=partions' [#74603]

-------------------------------------------------------------------
Fri Feb  4 13:09:49 CET 2005 - postadal@suse.cz

- updated to version 1.9.0

-------------------------------------------------------------------
Thu Jan 13 17:24:55 CET 2005 - postadal@suse.cz

- updated to version 1.8.1
- extended comment in sysconfig.mdadm [#48567]

-------------------------------------------------------------------
Fri Aug 06 12:09:58 CEST 2004 - postadal@suse.cz

- updated to version 1.6.0
  * added --auto= and --assume-clean options
  * added "degraded" and "recovering" options to the "Status:" entry

-------------------------------------------------------------------
Tue Feb 10 13:45:52 CET 2004 - postadal@suse.cz

- updated to version 1.5.0
  * new commands "mdassemble"
  * support for raid6 as found in 2.6.2
  * support partitioned md arrays with a different major number and
    naming scheme
  * added "SparesMissing" event when --monitor first sees an array and
    it doesn't have the enough spare devices.

-------------------------------------------------------------------
Sun Jan 11 11:50:04 CET 2004 - adrian@suse.de

- add %defattr

-------------------------------------------------------------------
Mon Dec  1 10:53:02 CET 2003  - fehr@suse.de

- fix quoting problem in start script (#33392)

-------------------------------------------------------------------
Fri Aug 29 09:36:24 CEST 2003 - fehr@suse.de

- add PreReq for fillup

-------------------------------------------------------------------
Tue Aug 26 10:23:44 CEST 2003 - fehr@suse.de

- add %stop_on_removal and %restart_on_update

-------------------------------------------------------------------
Thu Aug 14 15:40:53 CEST 2003 - fehr@suse.de

- add missing activation metadata in sysconfig (#28901)

-------------------------------------------------------------------
Tue Jul 29 11:03:36 CEST 2003 - fehr@suse.de

- update to new version 1.3.0 of package

-------------------------------------------------------------------
Mon Apr 14 20:01:43 CEST 2003 - postadal@suse.cz

- fixed init script (added return value for unimplemented reload function)

-------------------------------------------------------------------
Mon Mar 31 17:37:03 CEST 2003 - postadal@suse.cz

- added buildroot, init script, sysconfig
- bzip2 sources and cleaned specfile

-------------------------------------------------------------------
Thu Mar 20 16:18:13 CET 2003  - fehr@suse.de

- update to version 1.2.0 of package

-------------------------------------------------------------------
Mon Mar  3 12:16:22 CET 2003  - fehr@suse.de

- update to version 1.1.0 of package

-------------------------------------------------------------------
Mon Dec  2 11:30:52 CET 2002  - fehr@suse.de

- Fix for new glibc/gcc

-------------------------------------------------------------------
Tue Sep 17 17:34:28 CEST 2002 - ro@suse.de

- removed bogus self-provides

-------------------------------------------------------------------
Mon Sep 13 15:10:00 CEST 2002 - lmb@suse.de

- Fix for 64bit arch; ioctl returns long instead of int (#20339)

-------------------------------------------------------------------
Fri Aug 23 11:16:51 MEST 2002 - lmb@suse.de

- Multipath arrays can now be build manually even without a superblock.
- One debugging chunk removed from patch.

-------------------------------------------------------------------
Tue Aug 13 14:43:02 MEST 2002 - lmb@suse.de

- Fix for the assembly of multipath arrays.

-------------------------------------------------------------------
Mon Aug 12 11:46:43 MEST 2002 - lmb@suse.de

- Added patch to support the enhanced multipath features.

-------------------------------------------------------------------
Mon Aug  5 16:05:19 CEST 2002 - fehr@suse.de

- make SuSE package from version 1.0.1 of mdadm

Places

File mdadm.changes of Package mdadm (Revision 125df49ffda8a0a19f18e617ff394635)

Places