openSUSE Build Service

Overview Repositories Revisions Requests Users Attributes Meta

File mdadm.changes of Package mdadm (Revision dc88a1da63a5f7d90d2b2e85060b35c9)

Currently displaying revision dc88a1da63a5f7d90d2b2e85060b35c9 , Show latest

-------------------------------------------------------------------
Sun Nov  9 23:38:39 CET 2008 - ro@suse.de

- fix patch apply depth

-------------------------------------------------------------------
Fri Nov  7 12:34:30 CET 2008 - nfbrown@suse.de

- mdadm-auto-assemble.patch - fix various bugs in
  auto-assemble
- start-kpartx-for-imsm-devices.patch - IMSM devices
  need to be partitioned, and may programs including
  YaST don't understand partitioned md devices,
  so run kpartx to create 'dm' based partitions which
  have a better chance for being understood
  This relates to FATE#304220

-------------------------------------------------------------------
Fri Nov  7 10:32:35 CET 2008 - ro@suse.de

- remove udev rule (conflicting with file in udev package)

-------------------------------------------------------------------
Fri Nov  7 02:58:40 CET 2008 - ro@suse.de

- buildfix: add missing DESTDIR to Makefile for udev rule 
- fix len in snprintf to silence compiler warning about potential
  overflow

-------------------------------------------------------------------
Thu Nov  6 03:22:50 CET 2008 - nfbrown@suse.de

- Update from mdadm-3.0-devel1 to mdadm-3.0-devel2.
  This includes various bug fixes and enhancements to the
  extent that DDF and IMSM work reasonably well and can be
  auto-assembled much like other arrays.
- Allow BOOT_MD_USE_MDADM_CONFIG to have the value 'part'
  that, like 'no', arrays are auto-assembled.  However they
  get assembled as 'mdp' partitionable arrays where possible.
  This currently only affect arrays with v1.x metadata.
  This supports FATE#303894

-------------------------------------------------------------------
Fri Oct  3 15:28:49 CEST 2008 - mmarek@suse.cz

- fixed mdmon's clone_monitor on ia64

-------------------------------------------------------------------
Fri Oct  3 14:28:55 CEST 2008 - mmarek@suse.cz

- fixed byte swapping in super-intel.c on big endian.

-------------------------------------------------------------------
Wed Sep 24 18:24:25 CEST 2008 - ro@suse.de

- change "udevsettle" to "udevadm settle"

-------------------------------------------------------------------
Fri Sep 19 11:14:05 CEST 2008 - mmarek@suse.cz

- added /var/run/mdadm for mdmon
- fixed build

-------------------------------------------------------------------
Thu Sep 18 09:33:19 CEST 2008 - nfbrown@suse.de

- update to mdadm-3.0-devel1
  package version number is set to 3.0 to avodi future confusion.
  This is a substantial update that provides support for handling
  the metadata entirely in userspace and thus making easier to 
  handle a variety of metadata formats.  Support is included for
  DDF and for the Intel Matrix metadata used by recent ICH chipsets.

An extra program 'mdmon' is needed and included.  It is run to
  monitor any array using 'external' (to the kernel) metadata
  and will update the metadata in response to device failures etc.

This is required for FATE 304219

-------------------------------------------------------------------
Wed Sep  3 11:09:34 CEST 2008 - hare@suse.de

- Call mkinitrd_setup during %post and %postun (bnc#413709)

-------------------------------------------------------------------
Sun Aug 17 08:04:26 CEST 2008 - aj@suse.de

- Fix init scripts.

-------------------------------------------------------------------
Wed Jul 23 15:21:59 CEST 2008 - hare@suse.de

- Include mkinitrd scriptlets.

-------------------------------------------------------------------
Fri Jun 20 14:28:20 CEST 2008 - mmarek@suse.cz

- updated to 2.6.7 + fixes from git
  *   Avoid segfault when parsing /proc/mdstat with auto-read-only
      arrays.
  *   For v0.90 superblocks, print the 'Events' count as a real
      count, not 2 numbers separated by a dot.
  *   Allow creation of a RAID6 with exactly one missing device.
  *   Use LOG_PID for syslog, so you get the pid of mdadm in the
      log files.
  *   --export now works with --examine too (not just --detail)
  *   Improve auto-creation of device special file when using
      --incremental
  *   Simple locking for --incremental so mdadm doesn't get
      confused when run concurrently with itself.
  *   Make --incremental cope better with arrays that are being
      reshaped.
  *   Fix autoassemble for stack arrays.
- remove /tmp/mdadm.conf in boot.md (bnc#401138)

-------------------------------------------------------------------
Wed Apr 30 15:57:14 CEST 2008 - mmarek@suse.cz

- added some fixes from Neil's git repo, fixing bnc#368704 among
  others

-------------------------------------------------------------------
Mon Feb  4 19:24:54 CET 2008 - mmarek@suse.cz

- correctly display rc_status in boot.md

-------------------------------------------------------------------
Wed Jan 23 15:55:24 CET 2008 - mmarek@suse.cz

- fixed auto-assembly part of boot.md
  * if /etc/mdadm.conf is empy or only contains whitespace or
    comments, no autoassembly is done
  * remove /tmp/mdadm.conf even if a directory [#329678]
- dropped mdrun and raidautorun (no longer needed)

-------------------------------------------------------------------
Wed Oct 24 17:08:11 CEST 2007 - mmarek@suse.cz

- updated to 2.6.4
  *  Make "--create --auto=mdp" work for non-standard device names.
  *  Fix restarting of a 'reshape' if it was stopped in the middle.
  *  Fix a segfault when using v1 superblock.
  *  Make --write-mostly effective when re-adding a device to an
     array.
  *  Various minor fixes
- changes in 2.6.3:
  * allow --write-behind to be set for --grow.
  * When adding new disk to an array, don't reserve so much bitmap
    space that the disk cannot store the required data. (Needed
    when 1.x array was created with older mdadm).
  * When adding a drive that was a little too small, we did not get
    the correct error message.
  * Make sure that if --assemble find an array in the critical
    region of a reshape, and cannot find the critical data to
    restart the reshape, it gives an error message.
  * Fix segfault with '--detail --export' and non-persistent
    superblocks.
  * Various manpage updates.
  * Improved 'raid4' support (--assemble, --monitor)
  * Option parsing fixes w.r.t -a
  * Interpret "--assemble --metadata=1" to allow any version 1.x
    metadata, and be more specific in the "metadata=" message
    printed with --examine --brief
  * Fix spare migration in --monitor.

-------------------------------------------------------------------
Fri Jul 27 13:01:01 CEST 2007 - mmarek@suse.cz

- changes to the init script [#288454]
  * don't try to autoassemble if /etc/mdadm.conf exists (even an
    empty one)
  * ony autoassemble partitions found in /proc/partitions

-------------------------------------------------------------------
Fri Jul 13 15:02:21 CEST 2007 - mmarek@suse.cz

- updated to 2.6.2
  * --fail detached and --remove faulty can be used to fail and
    remove devices that are no longer physically present.
  * --export option for --detail or present information in a format
    that can be processed by udev.
  * fix internal bitmap allocation problems with v1.1, v1.2
    metadata.
  * --help now goes to stdout so you can direct it to a pager.
  * Various manpage updates.
  * Make "--grow --add" for linear arrays really work.
  * --auto-detect to trigger in-kernel autodetect.
  * Make return code for "--detail --test" more reliable.  Missing
    devices as well as failed devices cause an error.
- added some fixes from Neil's git repo (mdadm-git-fixes.patch)

-------------------------------------------------------------------
Thu Jun 21 15:58:37 CEST 2007 - adrian@suse.de

- fix changelog entry order

-------------------------------------------------------------------
Mon Apr  2 15:00:10 CEST 2007 - mmarek@suse.cz

- updated to 2.6.1
  * --monitor was producing some meaningless warnings due to a bug.
  * Fix some compiler warnings.
  * Fully support --grow for raid6.  If a reshape crashed during
    the critical period, mdadm wouldn't restore the Q information
    properly.
  * Update documentation for --grow.
  * Report bitmap status in --detail and --examine
  * Default to v1 superblocks instead of v0.90 if the array
    is too big for 0.90 to handle.
  * Sort the output of "mdadm --detail --scan" so that it is
    in a suitable order for assembling arrays. i.e. components come
    before an array that they are part of.
  * Require bitmap files to have a '/' in their name.
  * Rewrite 'reshape' support including performing a backup
    of the critical region for a raid5 growth, and restoring that
    backup after a crash.
  * Put a 'canary' at each end of the backup so a corruption
    can be more easily detected.
  * Support --backup-file for backing-up critical section during
    growth.
  * Erase old superblocks (of different versions) when creating new
    array.
  * Allow --monitor to work with arrays with >28 devices
  * Report reshape information in --detail
  * Handle symlinks in /dev better
  * Fix mess in --detail output which a device is missing.
  * Support 'bitmap=' in mdadm.conf for auto-assembling arrays with
    write-intent bitmaps in separate files.
  * Fix alignment problem in version-1 superblocks.
    NOTE: This is an incompatable change affecting raid5 reshape.
    If you want to reshape a raid5 using version-1 superblocks,
    use 2.6.17-rc2 or later, and mdadm-2.4.1 or later.
  * Support 'mailfrom' line in mdadm.conf so the From: line in alert
    emails can be explicitly set.
  * Arrange that SparesMissing (which is similar in import to
    DegradedArray) generates an Email.
  * Assume "DEVICE partitions" if no DEVICE line is given.
  * Support new 'offset' layout for raid10.
  * When creating a bitmap file, choose a chunksize to limit number
    of bitmap chunks to 2 million.  More than this can cause kmalloc
    failure.
  * New 'CREATE' line in mdadm.conf for defaults such as owner, group,
    mode and auto-flag
  * --detail checks if array has been started or not and includes that
    in report.
  * When using --update=uuid on an array with a bitmap, update the
    bitmap's uuid too.
  * Add a copy of /proc/mdstat to the mail message sent by mdadm
    --monitor.
  * New flag --no-degraded to avoid starting arrays if there are
    fewer devices available than last time the array was started.
    This is only needed with --scan, as with --scan, that behaviour
    is the default.
  * Support for 'homehost' concept.  This is a fairly major update.
    It includes a configfile option and a command line option for
    specifying a homehost, records that host in the superblock,
    and reports the homehost where possible.
  * Support for Auto Assembly.  "mdadm -As" will, if provided with
    the name of a homehost, try to assemble all arrays it can find
    that were created for that homehost.  See man pages for more details.
  * Don't try to create devices with --manage or --grow
  * allow default metadata (superblock) type to be specified
    in mdadm.conf
  * Avoid some misdetection of overlapping partitions
  * Add 'Array Slot' line to --examine for version-1 superblocks
    to make it a bit easier to see what is happening.
  * Work around bug in --add handling for  version-1 superblocks
    in 2.6.17 (and prior).
  * Make -assemble a bit more resilient to finding strange
    information in superblocks.
  * When creating devices in /dev/md/ create matching symlinks
    from /dev.  e.g. /dev/md0 -> /dev/md/0.
    Allow this to be disabled in mdadm.conf or on command line.
  * Allow a number (of partitions) after the 'yes' option to --auto=
    This is particularly useful in the 'create' line in mdadm.conf.
  * Remove partitions from any whole device that is made part of
    an md array.  This is a work-around for annoying messages
    when the first block on some drive accidentally looks like a
    partition table.
  * Close stray fd in mdassemble so that it can assemble stacked
    devices
  * If mdassemble finds an array already assembled, it marks it
    read-write.
  * Remove error in md_open if array is already active.  This isn't
    needed and gets in the ways if an array was created e.g. in
    initramfs, but device doesn't yet exist in /dev.
  * When --assemble --scan is run, if all arrays that could be found
    have already been started, don't report an error.
  * Allow --assemble --force to mark a raid6 clean when it has two
    missing devices (which is needed else if won't assemble.
    Without this fix it would only assemble if one or zero
    missing devices.
  * Support --update=devicesize for cases where the underlying device
    can change size.
  * Default to --auto=yes so the array devices with 'standard' names
    get created automatically, as this is almost always what is wanted.
  * Give useful message if raid4/5/6 cannot be started because it is
    not clean and is also degraded.
  * Increase raid456 stripe cache size if needed to --grow the array.
    The setting used unfortunately requires intimate knowledge of the
    kernel, and it not reset when the reshape finishes.
  * Change 'Device Size' to 'Used Dev Size' because it only shows how
    much of each device is actually used, not how big they are.
  * --wait or -W will wait for resync activity to finish on the given
    devices.
  * If two drives in a raid5 disappear at the same time, then "-Af"
    will add them both in rather than just one and forcing the array
    to 'clean'.  This is slightly safer in some cases.
  * Don't hold md device open for so long in --monitor mode - map_dev
    can be slow and interferes with trying to stop the array.
  * Support --uuid= with --create to choose your own UUID.
  * New major more "--incremental" for incremental assemble of arrays,
    intended for use with udev.
  * lots of bugfixes
  * manpage updates

-------------------------------------------------------------------
Wed Jan 10 11:58:14 CET 2007 - mmarek@suse.cz

- use raidautorun instead of mdrun to autodetect the raid arrays in
  boot.md [#230733]

-------------------------------------------------------------------
Wed Nov  8 10:51:13 CET 2006 - prusnak@suse.cz

- fixed subscript out of range [#212697]

-------------------------------------------------------------------
Wed Sep 20 17:17:22 CEST 2006 - mjancar@suse.cz

- update to 2.5.3
  * lots bugfixes
  * drop all patches (integrated upstream)

-------------------------------------------------------------------
Fri Jul 28 13:12:47 CEST 2006 - olh@suse.de

- remove dropped boot.ibmsis from boot.md
- boot.rootfsck should start before boot.md (#181972)

-------------------------------------------------------------------
Fri Jul 21 14:16:28 CEST 2006 - olh@suse.de

- remove boot.proc from Required-Start: in boot.md (#178753)

-------------------------------------------------------------------
Wed May  3 13:12:42 CEST 2006 - mjancar@suse.cz

- fix false SparesMissing error (#171326)

-------------------------------------------------------------------
Wed Apr 26 09:46:28 CEST 2006 - hare@suse.de

- Fix init script dependencies
- Implement MDADM_DEVICE_TIMEOUT to set a timeout for 
  udevsettle (#149979)

-------------------------------------------------------------------
Tue Apr 25 13:39:38 CEST 2006 - mjancar@suse.cz

- add static device nodes for udev (#168824)

-------------------------------------------------------------------
Wed Apr 19 10:27:19 CEST 2006 - mjancar@suse.cz

- set $BOOT_MD_USE_MDADM_CONFIG to "yes" by default (#155120)

-------------------------------------------------------------------
Fri Apr  7 11:33:15 CEST 2006 - mjancar@suse.cz

- detach mdadmd from tty in rcmdadmd (#160881)

-------------------------------------------------------------------
Mon Apr  3 09:54:55 CEST 2006 - mjancar@suse.cz

- fix garbled output with --detail (#160827)
- fix fix write-mostly with --add and --re-add (#162968)

-------------------------------------------------------------------
Fri Mar 24 21:31:54 CET 2006 - mjancar@suse.cz

- add /sbin/raidautorun (#159460)

-------------------------------------------------------------------
Wed Mar  8 18:33:12 CET 2006 - mjancar@suse.cz

- add $BOOT_MD_USE_MDADM_CONFIG sysconfig variable (#155120)

-------------------------------------------------------------------
Thu Feb  9 16:59:52 CET 2006 - mjancar@suse.cz

- round free size to chunk size multiply on --create (#148562)

-------------------------------------------------------------------
Tue Feb  7 08:59:50 CET 2006 - mjancar@suse.cz

- move boot.multipath to Should-Start instead of Required-Start

-------------------------------------------------------------------
Mon Feb  6 15:27:47 CET 2006 - mjancar@suse.cz

- add "Obsoletes: raidtools"
- start boot.md after boot.multipath
- call mdadm without -a from mdrun, an argument is required in 2.2

-------------------------------------------------------------------
Mon Feb  6 11:36:26 CET 2006 - mjancar@suse.de

- don't start mdadmd by default

-------------------------------------------------------------------
Sun Feb  5 20:46:43 CET 2006 - mjancar@suse.cz

- include option for email to be sent on start (#142105)
- fix missing md autostart due to raidtools dropped (#148234)
  * include mdrun script from Debian
  * create boot.md initscipt

-------------------------------------------------------------------
Sun Feb  5 17:46:32 CET 2006 - schwab@suse.de

- Fix memset parameters.

-------------------------------------------------------------------
Thu Feb  2 12:30:26 CET 2006 - mjancar@suse.cz

- fix segfault on --assemble (#146514)

-------------------------------------------------------------------
Fri Jan 27 02:12:42 CET 2006 - mls@suse.de

- converted neededforbuild to BuildRequires

-------------------------------------------------------------------
Wed Jan 25 10:48:18 CET 2006 - olh@suse.de

- fix uninitialized variable, memset call and memcmp/memcpy bug
  mdadm.bug144647-array.init.patch
  mdadm.bug144647-update_super1-memcpy.patch
  mdadm.bug144647-add_internal_bitmap0-memcpy.patch

-------------------------------------------------------------------
Wed Jan 11 13:49:54 CET 2006 - mjancar@suse.cz

- update ro 2.2

-------------------------------------------------------------------
Tue Dec 20 12:57:25 CET 2005 - ro@suse.de

- at least output errors if they occur (instead of ignoring)

-------------------------------------------------------------------
Wed Nov 30 17:19:24 CET 2005 - schwab@suse.de

- Fix broken formats.

-------------------------------------------------------------------
Tue Oct 25 09:53:57 CEST 2005 - aj@suse.de

- Build with -fno-strict-aliasing.

-------------------------------------------------------------------
Wed Oct 12 20:18:00 CEST 2005 - mjancar@suse.cz

- update to 2.1

-------------------------------------------------------------------
Thu Jul 28 20:28:32 CEST 2005 - anicka@suse.cz

- update to 1.12.0

-------------------------------------------------------------------
Wed Jun 15 13:16:42 CEST 2005 - meissner@suse.de

- use RPM_OPT_FLAGS correctly.

-------------------------------------------------------------------
Tue Apr 19 13:48:24 CEST 2005 - postadal@suse.de

- updated to version 1.11.0
- fixed for gcc 4.0
- removed obsoleted patch config-fix

-------------------------------------------------------------------
Wed Mar 30 13:24:23 CEST 2005 - postadal@suse.cz

- fixed parsing command line option '--config=partions' [#74603]

-------------------------------------------------------------------
Fri Feb  4 13:09:49 CET 2005 - postadal@suse.cz

- updated to version 1.9.0

-------------------------------------------------------------------
Thu Jan 13 17:24:55 CET 2005 - postadal@suse.cz

- updated to version 1.8.1
- extended comment in sysconfig.mdadm [#48567]

-------------------------------------------------------------------
Fri Aug 06 12:09:58 CEST 2004 - postadal@suse.cz

- updated to version 1.6.0
  * added --auto= and --assume-clean options
  * added "degraded" and "recovering" options to the "Status:" entry

-------------------------------------------------------------------
Tue Feb 10 13:45:52 CET 2004 - postadal@suse.cz

- updated to version 1.5.0
  * new commands "mdassemble"
  * support for raid6 as found in 2.6.2
  * support partitioned md arrays with a different major number and
    naming scheme
  * added "SparesMissing" event when --monitor first sees an array and
    it doesn't have the enough spare devices.

-------------------------------------------------------------------
Sun Jan 11 11:50:04 CET 2004 - adrian@suse.de

- add %defattr

-------------------------------------------------------------------
Mon Dec  1 10:53:02 CET 2003  - fehr@suse.de

- fix quoting problem in start script (#33392)

-------------------------------------------------------------------
Fri Aug 29 09:36:24 CEST 2003 - fehr@suse.de

- add PreReq for fillup

-------------------------------------------------------------------
Tue Aug 26 10:23:44 CEST 2003 - fehr@suse.de

- add %stop_on_removal and %restart_on_update

-------------------------------------------------------------------
Thu Aug 14 15:40:53 CEST 2003 - fehr@suse.de

- add missing activation metadata in sysconfig (#28901)

-------------------------------------------------------------------
Tue Jul 29 11:03:36 CEST 2003 - fehr@suse.de

- update to new version 1.3.0 of package

-------------------------------------------------------------------
Mon Apr 14 20:01:43 CEST 2003 - postadal@suse.cz

- fixed init script (added return value for unimplemented reload function)

-------------------------------------------------------------------
Mon Mar 31 17:37:03 CEST 2003 - postadal@suse.cz

- added buildroot, init script, sysconfig
- bzip2 sources and cleaned specfile

-------------------------------------------------------------------
Thu Mar 20 16:18:13 CET 2003  - fehr@suse.de

- update to version 1.2.0 of package

-------------------------------------------------------------------
Mon Mar  3 12:16:22 CET 2003  - fehr@suse.de

- update to version 1.1.0 of package

-------------------------------------------------------------------
Mon Dec  2 11:30:52 CET 2002  - fehr@suse.de

- Fix for new glibc/gcc

-------------------------------------------------------------------
Tue Sep 17 17:34:28 CEST 2002 - ro@suse.de

- removed bogus self-provides

-------------------------------------------------------------------
Mon Sep 13 15:10:00 CEST 2002 - lmb@suse.de

- Fix for 64bit arch; ioctl returns long instead of int (#20339)

-------------------------------------------------------------------
Fri Aug 23 11:16:51 MEST 2002 - lmb@suse.de

- Multipath arrays can now be build manually even without a superblock.
- One debugging chunk removed from patch.

-------------------------------------------------------------------
Tue Aug 13 14:43:02 MEST 2002 - lmb@suse.de

- Fix for the assembly of multipath arrays.

-------------------------------------------------------------------
Mon Aug 12 11:46:43 MEST 2002 - lmb@suse.de

- Added patch to support the enhanced multipath features.

-------------------------------------------------------------------
Mon Aug  5 16:05:19 CEST 2002 - fehr@suse.de

- make SuSE package from version 1.0.1 of mdadm

Places

File mdadm.changes of Package mdadm (Revision dc88a1da63a5f7d90d2b2e85060b35c9)

Places