Sign Up
Log In
Log In
or
Sign Up
Places
All Projects
Status Monitor
Collapse sidebar
devel:languages:perl:autoupdate
perl-SNMP-Info
perl-SNMP-Info.changes
Overview
Repositories
Revisions
Requests
Users
Attributes
Meta
File perl-SNMP-Info.changes of Package perl-SNMP-Info
------------------------------------------------------------------- Fri Sep 13 05:32:14 UTC 2024 - Tina Müller <timueller+perl@suse.de> - updated to 3.972.0 (3.972000) see /usr/share/doc/packages/perl-SNMP-Info/Changes Version 3.972000 (2024-09-12) [NEW FEATURES] * #530 Extreme WiNG support Version 3.971000 (2024-08-28) [NEW FEATURES] * #524 SilverPeak device support * Layer3::Meraki class from Jeremiah Garmatter [ENHANCEMENTS] * #502 update SNMP::Info::Layer3::Fortinet * #519 lots of improvements to Layer2::Aerohive ------------------------------------------------------------------- Thu Feb 29 03:09:00 UTC 2024 - Tina Müller <timueller+perl@suse.de> - updated to 3.970001 see /usr/share/doc/packages/perl-SNMP-Info/Changes Version 3.970001 (2024-02-28) [BUG FIXES] * fix uninitialized warnings in CiscoASA parse_inetaddress although the type is ipv6z the entry has no zone identifier Version 3.97 (2024-02-26) [BUG FIXES] * fix invalid IPv6 addresses returned by ipv6_addr for entries without a zone identifier caused by off-by-one error in parse_inetaddress Version 3.96 (2024-02-26) [ENHANCEMENTS] * return IPv6 addresses of type ipv6z consistent by all IPv6 address methods * add parse_inetaddress method to IPv6 for parsing RFC4001 InetAddress OIDs used to index the IP-MIB and refactor its methods to use it where appropriate * override parse_inetaddress for Cisco ASA which doesn't conform to RFC4001 because it is missing the number of octets in InetAddress, seems it's indexed like the CISCO-IETF-IP-MIB * #512 add psu2 to foundry, poe mib has been renamed (needs netdisco-mibs 4.039) ------------------------------------------------------------------- Tue Sep 5 16:58:24 UTC 2023 - Tina Müller <timueller+perl@suse.de> - updated to 3.95 see /usr/share/doc/packages/perl-SNMP-Info/Changes Version 3.95 (2023-09-02) [ENHANCEMENTS] * #491 Dell - Take into account OS10 * #492 F5 - Update the module to correctly retrieve interfaces * #499 aoscx power over ethernet support * #500 pretty format 2.5gbps speeds [BUG FIXES] * partial revert #484 and replace with Cisco specific CiscoAgg::agg_ports_propvirtual ------------------------------------------------------------------- Wed Jul 26 03:12:46 UTC 2023 - Tina Müller <timueller+perl@suse.de> - updated to 3.94 see /usr/share/doc/packages/perl-SNMP-Info/Changes Version 3.94 (2023-07-25) [BUG FIXES] * partial revert #484 and replace with Cisco specific CiscoAgg::agg_ports_propvirtual Version 3.93 (2023-07-14) [ENHANCEMENTS] * #484 add Aggregate::agg_ports_ifstack to CiscoAgg::agg_ports ------------------------------------------------------------------- Tue Feb 21 03:08:27 UTC 2023 - Tina Müller <timueller+perl@suse.de> - updated to 3.92 see /usr/share/doc/packages/perl-SNMP-Info/Changes Version 3.92 (2023-02-20) [NEW FEATURES] * #450 Hirschmann switch support * #463 Netonix switch support [ENHANCEMENTS] * new() accepts hashref as well as bare list of arguments # #475 additional recognition of Allied switches * #477 additional recognition of Cisco 9xxx switches [BUG FIXES] * #460 always return $info instance to allow error() inspection * #464 check in case non numeric key in cache befor inc * #474 workaround for aruba-cx link aggregation ------------------------------------------------------------------- Fri Aug 19 03:08:56 UTC 2022 - Tina Müller <timueller+perl@suse.de> - updated to 3.89 see /usr/share/doc/packages/perl-SNMP-Info/Changes Version 3.89 (2022-08-18) [BUG FIXES] * add Regexp::Common to dependencies * fix tests for i_vlan_membership_untagged Version 3.88 (2022-08-17) [NEW FEATURES] * Add i_subinterfaces for VLAN subinterfaces in Layer3::Juniper * Add i_vlan and i_vlan_membership_untagged to Layer3::Juniper based on ifChassisLogicalUnit ------------------------------------------------------------------- Sat Aug 13 03:11:52 UTC 2022 - Tina Müller <timueller+perl@suse.de> - updated to 3.87 see /usr/share/doc/packages/perl-SNMP-Info/Changes Version 3.87 (2022-08-12) [NEW FEATURES] * PortAccessEntity/IEEE8021-PAE-MIB module support [ENHANCEMENTS] * #462 SNMP::Info::Layer3::PaloAlto to include layer 2 * #461 Expose lldLocChassisId as $lldp->lldp_loc_id * Update CiscoStats.pm for Amsterdam IOS-XE release [BUG FIXES] * #470 avoid error if Juniper VLAN not in bp_index Version 3.86 (2022-08-10) [BUG FIXES] * #468 Cisco dotted subinterfaces had incorrect vlan assigned Version 3.85 (2022-08-02) [NEW FEATURES] * Add i_subinterfaces for VLAN subinterfaces in CiscoVTP ------------------------------------------------------------------- Tue Jul 5 03:07:18 UTC 2022 - Tina Müller <timueller+perl@suse.de> - updated to 3.84 see /usr/share/doc/packages/perl-SNMP-Info/Changes Version 3.84 (2022-07-04) [NEW FEATURES] * Add support for HW Group STE whitespace monitoring devices ------------------------------------------------------------------- Thu Mar 17 03:09:02 UTC 2022 - Tina Müller <timueller+perl@suse.de> - updated to 3.82 see /usr/share/doc/packages/perl-SNMP-Info/Changes Version 3.82 (2022-03-16) [NEW FEATURES] * add Cisco BGP MIB support to all Cisco Layer 3 devices ------------------------------------------------------------------- Fri Oct 8 03:07:23 UTC 2021 - Tina Müller <timueller+perl@suse.de> - updated to 3.81 see /usr/share/doc/packages/perl-SNMP-Info/Changes Version 3.81 (2021-10-07) [ENHANCEMENTS] * #400 change IPv6 decode warning to be debug-only * #394 Recognise hyphenated cumulus version strings * #401 add DLink layers always 2+3 * #377 i/if_ignore cleanup [BUG FIXES] * #443 trapeze and nws deep recursion fix * #378 fix several uninitialized vars * #374 undefined error from H3C class ------------------------------------------------------------------- Thu Sep 23 03:09:19 UTC 2021 - Tina Müller <timueller+perl@suse.de> - updated to 3.80 see /usr/share/doc/packages/perl-SNMP-Info/Changes Version 3.80 (2021-09-22) [NEW FEATURES] * layer3::fortinet now supports link aggregation mapping * Add support for Riverbed SteelheadEx and Steelfusion (#438) [ENHANCEMENTS] * change default class for Cisco from Layer3::Cisco to Layer3::CiscoSwitch [ENHANCEMENTS] * Fix typo in Whiterabbit.pm (#439) ------------------------------------------------------------------- Fri Sep 10 03:07:50 UTC 2021 - Tina Müller <timueller+perl@suse.de> - updated to 3.78 see /usr/share/doc/packages/perl-SNMP-Info/Changes Version 3.78 (2021-09-08) [BUG FIXES] * Fix undefined value error in Bridge.pm i_vlan ------------------------------------------------------------------- Sun Sep 5 03:07:17 UTC 2021 - Tina Müller <timueller+perl@suse.de> - updated to 3.77 see /usr/share/doc/packages/perl-SNMP-Info/Changes Version 3.77 (2021-09-04) [ENHANCEMENTS] * set_i_vlan support for Ruckus/Brocade/Foundry ------------------------------------------------------------------- Wed Aug 25 03:06:30 UTC 2021 - Tina Müller <timueller+perl@suse.de> - updated to 3.74 see /usr/share/doc/packages/perl-SNMP-Info/Changes Version 3.74 (2021-08-24) [NEW FEATURES] * Support changing PVID on Arista switches (#429) * Support for Whiterabbit devices [ENHANCEMENTS] * Patch H3C broken node-vlan mapping ------------------------------------------------------------------- Tue Jun 29 03:08:39 UTC 2021 - Tina Müller <timueller+perl@suse.de> - updated to 3.73 see /usr/share/doc/packages/perl-SNMP-Info/Changes Version 3.73 (2021-06-28) [BUG FIXES] * fix packaging error Version 3.72 (2021-06-28) [NEW FEATURES] * Support for Aruba CX switches * IEEE802_Bridge module [BUG FIXES] * #403 don't use layer3::dell for layer3::aruba devices * layer2::aerohive supports version numbers above 9 ------------------------------------------------------------------- Sat Nov 28 03:07:24 UTC 2020 - Tina Müller <timueller+perl@suse.de> - updated to 3.71 see /usr/share/doc/packages/perl-SNMP-Info/Changes Version 3.71 (2020-11-27) [NEW FEATURES] * #386 Teltonika RUT9XX support (jeroenvis) [ENHANCEMENTS] * #398, 411 more ubiquiti cleanup and support for er-12 (lbegnaud & inphobia) [BUG FIXES] * #409, 410 Don't add AUTOLOAD generated methods in symbol table * #372, 375 fix lldp on nx-os6 (inphobia) ------------------------------------------------------------------- Wed Oct 16 10:15:09 UTC 2019 - <timueller+perl@suse.de> - updated to 3.70 see /usr/share/doc/packages/perl-SNMP-Info/Changes Version 3.70 (2019-10-15) [NEW FEATURES] * #361 Siemens Scalance switch support * #365 Ciena Layer3 support * #368 DOCSIS cable modem support [ENHANCEMENTS] * #350 ubiquiti version string cleanup (LBegnaud) * #352 duplex support for ciscosb * #353 report all vendor names in lowercase * #353 sprinkle "use warnings" and "use strict" around * #358 prefer checkpoint mib over net-snmp mib (earendilfr) * #359 detect newer ios-xe using codenames (Christoph Neuhaus) * #367 test using latest MIBs version dynamically * #370 smarter Q-BRIDGE handling * poe power usage & mac address for ciscosb [BUG FIXES] * #353 doc fixes: report all required mibs for each module as based on code * #353 include fixes: don't include modules already imported from parent classes * #355 fix #252, don't think 6char devices names are mac addresses * #363 clean return calls in code * #364 strip newline from neoteris os_ver, fixes netdisco #647 ------------------------------------------------------------------- Mon Apr 29 05:32:14 UTC 2019 - Stephan Kulow <coolo@suse.com> - updated to 3.68 see /usr/share/doc/packages/perl-SNMP-Info/Changes Version 3.68 (2019-04-28) [NEW FEATURES] * initial support for redlion cellular routers (inphobia) [ENHANCEMENTS] * use pulsesecure mib in layer7::neoteris instead of juniper-ive ------------------------------------------------------------------- Sun Apr 21 05:25:45 UTC 2019 - Stephan Kulow <coolo@suse.com> - updated to 3.67 see /usr/share/doc/packages/perl-SNMP-Info/Changes Version 3.67 (2019-04-20) [NEW FEATURES] * #323 initial Lenovo / cnos support (inphobia) * #317 #326 DOCSIS Head End support (Pyro3d) [ENHANCEMENTS] * add v3 Context update() tests for net-snmp 5.8+ * support INFO_TRACE and SNMP_TRACE environment variables for Debug * #324 clean up exinda and add regression test [BUG FIXES] * #294 snmp::info should show full class used * #297 perl 5.28 removal of "use vars" * #306 fix incorrect interfaces for d-link * #319 make fortinet return a useful interface name (inphobia) * #320 improve duplicate interfaces() fixup * #321 clean interface descriptions of null and trailing space * #322 #327 full fix for aerohive tests * #325 lazy load legacy RFC1213-MIB only if needed * #496 fix for aerohive wireless clients support (inphobia) ------------------------------------------------------------------- Mon Mar 25 06:32:13 UTC 2019 - Stephan Kulow <coolo@suse.com> - updated to 3.66 see /usr/share/doc/packages/perl-SNMP-Info/Changes Version 3.66 (2019-03-24) [NEW FEATURES] * #316 add support for IS-IS routing protocol (pyro3d) [ENHANCEMENTS] * switch to Alien::SNMP for travis builds (ollyg) [BUG FIXES] * clarify MRO usage ------------------------------------------------------------------- Mon Feb 25 06:29:49 UTC 2019 - Stephan Kulow <coolo@suse.com> - updated to 3.65 see /usr/share/doc/packages/perl-SNMP-Info/Changes Version 3.65 (2019-02-24) [ENHANCEMENTS] * #296 expand CiscoAgg to also include LACP (inphobia) * #308 update VyOS enterprise OID * #310 bring layer3::oneaccess up to date for oneos6. (inphobia) * Add two more HP 2930F models (JeroenvIS) [BUG FIXES] * #295 make CiscoAgg return ifindex instead of bp_index (inphobia) * more documentation fixes + whitespace cleanup in all files ------------------------------------------------------------------- Mon Dec 31 06:32:37 UTC 2018 - Stephan Kulow <coolo@suse.com> - updated to 3.64 see /usr/share/doc/packages/perl-SNMP-Info/Changes Version 3.64 (2018-12-30) [NEW FEATURES] * #283 support for Exinda/GFI traffic shapers (inphobia) [ENHANCEMENTS] * #282 Aerohive base MAC lookup (inphobia) [BUG FIXES] * many documentation fixes (inphobia) ------------------------------------------------------------------- Thu Dec 6 16:14:27 UTC 2018 - Stephan Kulow <coolo@suse.com> - updated to 3.63 see /usr/share/doc/packages/perl-SNMP-Info/Changes Version 3.63 (2018-11-25) [ENHANCEMENTS] * #280 update to retrieve Aerohive serial * #271 update os_ver for Alcatel-Lucent (stromsoe) [BUG FIXES] * #273 remove old ADTRAN modules not in netdisco-mibs Version 3.62 (2018-10-29) [ENHANCEMENTS] * #278 Support for Cisco Firepower Threat Defense * #275 Document peth_port_ifindex for Junipers * #274 Add peth_port_ifindex override for Junipers * #270 Add support for additional Mikrotik models * Add HP 3810M, 2930M, 2930F and 2540 series switches [BUG FIXES] * #265 Fix typos in L3::Huawei ------------------------------------------------------------------- Sun Jul 22 05:57:24 UTC 2018 - coolo@suse.com - updated to 3.61 see /usr/share/doc/packages/perl-SNMP-Info/Changes Version 3.61 (2018-05-09) [ENHANCEMENTS] * #255 IPv6 support - Set the transport-specifier if given an IPv6 address * #195 IP address table - IPv4 Address Table will use the IP-MIB::ipAddressTable if the deprecated IP-MIB::ipAddrTable doesn't return results [BUG FIXES] * #261 EIGRP Peer Neighbor Formatting / Munge * #252 Unpack binary MAC if present in cdp_port * Fix SNMPv1 cdp_run check Version 3.60 (2018-05-06) [ENHANCEMENTS] * #263 detect Aerohive ap250 & ap230 models (inphobia) [BUG FIXES] * #140 LLDP fixes - treat remote port type of 'local' as an interface name if the remote port id doesn't look like an index * Fix potential issue in enumeration of LLDP reported system capabilities supported by the remote system due to the 'lldpRemSysCapSupported' leaf name being defined in multiple MIBs ------------------------------------------------------------------- Thu May 3 05:55:10 UTC 2018 - coolo@suse.com - updated to 3.59 see /usr/share/doc/packages/perl-SNMP-Info/Changes Version 3.59 (2018-05-01) [NEW FEATURES] * #214 SNMP::Info Device models Genua, ATMedia, Liebert [ENHANCEMENTS] * Capture base MAC in L3::Huawei * Change _lldp_addr_index to a method so it can be properly overridden in subclasses [BUG FIXES] * Capture fan ans power supply status in L3::Huawei when description is not available Version 3.58 (2018-04-29) [NEW FEATURES] * #202 Support for Aerohive access points [ENHANCEMENTS] * #220 Alcatel-Lucent / Nokia SR 7750 missing port information. Add duplex, fan, and power supply status, as well as, module inventory to L3::Timetra * Add fan and power supply status to L3::Huawei * Override ifMTU with max frame size when applicable in L3::Huawei [BUG FIXES] * Correct POE power module to port mapping in L3::Huawei ------------------------------------------------------------------- Fri Apr 27 05:52:53 UTC 2018 - coolo@suse.com - updated to 3.57 see /usr/share/doc/packages/perl-SNMP-Info/Changes Version 3.57 (2018-04-26) [ENHANCEMENTS] * #145 Patch for Huawei (robwwd) * #228 Huawei aggregate link support * POE and duplex admin support added to L3::Huawei * Significant performance improvement validating AUTOLOAD methods [BUG FIXES] * IEEE802dot3ad portlist is indexed with a dot1dBasePort, cross reference with dot1dBasePortIfIndex * Fix for macsuck in Cisco classes introduced in 3.55 caused by inheritance issue in CiscoStack ------------------------------------------------------------------- Mon Apr 23 06:00:10 UTC 2018 - coolo@suse.com - updated to 3.56 see /usr/share/doc/packages/perl-SNMP-Info/Changes Version 3.56 (2018-04-22) [BUG FIXES] * Fix table methods when defined as an OID which will not completely translate to a fully qualified textual leaf ------------------------------------------------------------------- Fri Apr 20 05:56:35 UTC 2018 - coolo@suse.com - updated to 3.55 see /usr/share/doc/packages/perl-SNMP-Info/Changes Version 3.55 (2018-04-19) [NEW FEATURES] * #260 Oneaccess (robwwd) * #259 Add ERX (Old Juniper E-Series JunOSe) Support (robwwd) * #258 Add support for Arbor devices (robwwd) * #253 Nexans switch support (paecker) * #142 Sixnet Switch Support [ENHANCEMENTS] * #117 Recognition for HP Blade switches (J R Binks) * #196 Support for powerconnect 8164F * Refactor Layer3::Dell for better support of newer models * Increase capture of i_vlan on router interfaces in L3::Cisco * Factor out logic to determine serial number from ENTITY-MIB in Layer2 and Layer3 to new method entity_derived_serial in Entity class and added new method entity_derived_os_ver in Entity class to determine OS version in a similar manner [BUG FIXES] * #67 Juniper EX4300 Missing/Wrong information * #61 ZyXEL (X)GS1900 family MIB - Fix loop in layers method * Fix ISA in AMAP and EDP classes * Add missing MIB in L2::Trapeze, L2::NWSS2300, and L3::Dell * Fix gigabit logic in i_duplex_admin() of CiscoStack * Prevent potential undefined warnings in i_speed_admin() of L2::C2900 and ports() of L3::C3550 * Correct validation and IID/key used in mau_set_i_speed_admin() and mau_set_i_duplex_admin() of MAU * Correct typo in MIB leaf names in L3::Aironet * Don't use MIB leafs that are not-accessible according to MIB NOTE: Fixing this logic now results in methods on MIB leafs specified as not-accessible failing validation in _validate_autoload_method() ------------------------------------------------------------------- Fri Apr 6 06:28:54 UTC 2018 - coolo@suse.com - updated to 3.54 see /usr/share/doc/packages/perl-SNMP-Info/Changes Version 3.54 (2018-04-01) [NEW FEATURES] * #141 Avocent ACS files for correct discovery in Netdisco * Add support for Avocent ACS 5K/6K/8K terminal servers in Layer1::Cyclades [ENHANCEMENTS] * #215 Nokia/Alcatel-Lucent 7705 LLDP * #220 Alcatel-Lucent / Nokia SR 7750 missing neighbors * Improve Layer3::Timetra model detection [BUG FIXES] * Fix logic in Layer1::Asante i_up() method * Fix MIB leaf typo in IPv6 * Don't use MIB leafs that are not-accessible according to MIB * Fix logic for determining if MIB leaf supports set operations NOTE: Fixing this logic now results in methods starting with set_ on MIB leafs without Write or Create access failing validation in _validate_autoload_method() Version 3.53 (2018-03-22) [NEW FEATURES] * #12 add Cisco PortFast support via CiscoStpExtensions::i_faststart_enabled [ENHANCEMENTS] * Report serial/version on Netgear FSM (paecker) * Add test harness and expand developer test coverage * Add back the base (RFC) MIBs for when net-snmp does not have them builtin [BUG FIXES] * Fix AUTOLOAD / can() bug that could result in DESTROY being redefined and dynamic methods not being added to the symbol table. version 3.52 (2018-03-19) [ENHANCEMENTS] * set fallback for nonmatching interfaces in Cumulus class * better interface naming for Ubiquiti * modify mock utility to work under a perlbrew environment ------------------------------------------------------------------- Thu Mar 15 06:48:30 UTC 2018 - coolo@suse.com - updated to 3.50 see /usr/share/doc/packages/perl-SNMP-Info/Changes version 3.50 (2018-03-14) [ENHANCEMENTS] * #198 Add Support for Gigamon devices [BUG FIXES] * #226 Avaya VSP devices - no ifAlias * #227 Remove bogus can() check in _set() * Fix SNMP::Info::IEEE802dot3ad when more than 1 LAG ------------------------------------------------------------------- Mon Mar 5 06:55:40 UTC 2018 - coolo@suse.com - updated to 3.49 see /usr/share/doc/packages/perl-SNMP-Info/Changes version 3.49 (2018-03-03) [ENHANCEMENTS] * Better Layer3::Cumulus interface naming [BUG FIXES] * Use GitHub for MIBs download for testing, instead of sf.net version 3.48 (2018-03-03) [ENHANCEMENTS] * Add Layer3::Cumulus for Cumulus Networks devices ------------------------------------------------------------------- Wed Feb 28 06:57:04 UTC 2018 - coolo@suse.com - updated to 3.47 see /usr/share/doc/packages/perl-SNMP-Info/Changes version 3.47 (2018-02-27) [ENHANCEMENTS] * Add LLDP-MIB::lldpXMedRemInventoryTable methods ------------------------------------------------------------------- Tue Feb 20 06:54:27 UTC 2018 - coolo@suse.com - updated to 3.46 see /usr/share/doc/packages/perl-SNMP-Info/Changes version 3.46 (2018-02-17) [ENHANCEMENTS] * Add method to get err-disable cause for interfaces on Cisco ------------------------------------------------------------------- Sat Feb 17 07:01:54 UTC 2018 - coolo@suse.com - updated to 3.45 see /usr/share/doc/packages/perl-SNMP-Info/Changes version 3.45 (2018-02-14) [ENHANCEMENTS] * Enable Layer3::Foundry for Brocade VDX platform [BUG FIXES] * #222 #238 #239 handle BayStack switches with port index 128 (zoeloe) ------------------------------------------------------------------- Tue Feb 13 07:02:03 UTC 2018 - coolo@suse.com - updated to 3.44 see /usr/share/doc/packages/perl-SNMP-Info/Changes version 3.44 (2018-02-12) [ENHANCEMENTS] * Improve F10 OS version detection (laelly) * Better IPv6 prefix derivation ------------------------------------------------------------------- Wed Feb 7 17:15:49 UTC 2018 - coolo@suse.com - updated to 3.43 see /usr/share/doc/packages/perl-SNMP-Info/Changes ------------------------------------------------------------------- Mon Dec 18 06:53:56 UTC 2017 - coolo@suse.com - updated to 3.39 see /usr/share/doc/packages/perl-SNMP-Info/Changes version 3.39 (2017-12-17) [ENHANCEMENTS] * #236 Enhanced Ubiquiti device support (L. Begnaud) * add HP J9774A model (H. Teulahti) [BUG FIXES] * fix scripts (F. Mass) * fix CiscoASA typos (laelly) ------------------------------------------------------------------- Tue Oct 24 05:48:57 UTC 2017 - coolo@suse.com - updated to 3.38 see /usr/share/doc/packages/perl-SNMP-Info/Changes version 3.38 (2017-10-23) [ENHANCEMENTS] * Layer2::Airespace several newer 802.11 data rates added [BUG FIXES] * #232 Improve generic Info::Layer3 serial number detection ------------------------------------------------------------------- Wed Jul 12 06:07:09 UTC 2017 - coolo@suse.com - updated to 3.37 see /usr/share/doc/packages/perl-SNMP-Info/Changes version 3.37 (2017-07-11) [ENHANCEMENTS] * Layer3::Juniper fixed to return os_ver for JUNOS 14.x and higher ------------------------------------------------------------------- Fri Jun 30 06:10:54 UTC 2017 - coolo@suse.com - updated to 3.36 see /usr/share/doc/packages/perl-SNMP-Info/Changes ------------------------------------------------------------------- Mon Nov 21 07:14:34 UTC 2016 - coolo@suse.com - updated to 3.34 see /usr/share/doc/packages/perl-SNMP-Info/ChangeLog version 3.34 (2016-11-20) [ENHANCEMENTS] * Support Cisco IPS Modules homed on the Cisco ASA (M. Kraus) [BUG FIXES] * Serial number on Nexus 9372 (genereic check for ID before using) (M. Caines) ------------------------------------------------------------------- Thu May 5 10:04:49 UTC 2016 - coolo@suse.com - updated to 3.33 see /usr/share/doc/packages/perl-SNMP-Info/ChangeLog version 3.33 (2016-04-27) [ENHANCEMENTS] * Move author-only tests to xt directory so they aren't run on installation by users [BUG FIXES] * Correct device serial number reporting for Cisco Nexus 5k switches with software version >= 7 version 3.32 (2016-04-26) [ENHANCEMENTS] * Add 200 Mbps and 2.0 Gbps aliases to SPEED_MAP * Add Palo Alto support * Add VMware support * Support for propMultiplexor as ifType * Add device MAC to APC UPS * [#61] Report APC model for PDU products * Removed DeviceMatrix from the distribution [BUG FIXES] * Support undefined (noSuchInstance) values in Offline mode * Do not init table cache if Cache provided by user * Avoid deep recusion when AUTOLOAD and carp collide * Detect Cisco VG350s as L3 devices instead of APs * fix for 'Use of inherited AUTOLOAD for non-method SNMP::Info::Layer2::HP::agg_ports_ifstack() is deprecated' * Workaround in IPv6.pm to deal with possibly incorrect IPV6-MIB implementations * [#71] AUTOLOAD typo-catcher search for SNMP::Info no longer anchored * [#70] Respect version/comm/secname on passed Session obj ------------------------------------------------------------------- Wed Jan 27 10:32:32 UTC 2016 - coolo@suse.com - updated to 3.31 see /usr/share/doc/packages/perl-SNMP-Info/ChangeLog version 3.31 (2016-01-22) [ENHANCEMENTS] * Support for CiscoSB OS and Version (D. Tuecks) * SONMP support for Enhanced Topology Table * Add support for channelized interfaces in L3::Passport [BUG FIXES] * Correct link to MIB tarball ------------------------------------------------------------------- Thu Nov 19 10:19:22 UTC 2015 - coolo@suse.com - updated to 3.30 see /usr/share/doc/packages/perl-SNMP-Info/ChangeLog version 3.30 (2015-11-16) [ENHANCEMENTS] * RT #106254: Add new sysObjectID mapping for Ubiquiti [BUG FIXES] * Correct link to MIB tarball * Correct port indexing of newer VSP 4K and 8K in L3::Passport * Statistics in the sysIfxStatTable are 64-bit counters, so they should override the 64-bit methods. ------------------------------------------------------------------- Fri Oct 16 09:37:59 UTC 2015 - coolo@suse.com - updated to 3.29 see /usr/share/doc/packages/perl-SNMP-Info/ChangeLog version 3.29 (2015-10-13) [ENHANCEMENTS] * Add IPv6::ipv6_addr() method to map IPv6 interface address indexes to actual addresses * Add support for (remote) IPv6 addresses to LLDP::lldp_addr() * Add LLDP::lldp_ipv6() and LLDP::lldp_mac() so that remote management addresses of specific types can be requested ------------------------------------------------------------------- Mon Sep 21 13:16:36 UTC 2015 - coolo@suse.com - updated to 3.28 see /usr/share/doc/packages/perl-SNMP-Info/ChangeLog version 3.28 (2015-06-18) [ENHANCEMENTS] * Add Layer3::Huawei class for Huawei Quidway switches * Modified generic Layer3::Cisco class: use community based indexing if the device returns a value for vtpVersion [BUG FIXES] * Correct port indexing of VSP 4K in L3::Passport version 3.27 (2015-05-05) [ENHANCEMENTS] * Cisco Aironet PSU information * Only log adding mibdirs at debug level 2 [BUG FIXES] * [#221] Drop Cisco Voice VLAN 4096 ------------------------------------------------------------------- Mon Apr 13 18:31:20 UTC 2015 - coolo@suse.com - updated to 3.26 see /usr/share/doc/packages/perl-SNMP-Info/ChangeLog ------------------------------------------------------------------- Sun May 1 10:39:22 UTC 2011 - coolo@opensuse.org - updated to 2.04, see Changes ------------------------------------------------------------------- Mon Nov 29 18:00:51 UTC 2010 - coolo@novell.com - called spec2changelog ------------------------------------------------------------------- Fri Nov 2 00:00:00 UTC 2007 - jfunk@funktronics.ca - Initial release
Locations
Projects
Search
Status Monitor
Help
OpenBuildService.org
Documentation
API Documentation
Code of Conduct
Contact
Support
@OBShq
Terms
openSUSE Build Service is sponsored by
The Open Build Service is an
openSUSE project
.
Sign Up
Log In
Places
Places
All Projects
Status Monitor