File poppler-0.14.1-strtok.patch of Package mingw64-poppler

Overview Repositories Revisions Requests Users Attributes Meta

File poppler-0.14.1-strtok.patch of Package mingw64-poppler (Revision a1d96b5c67c82f450c239b4c4ff71b24)

Currently displaying revision a1d96b5c67c82f450c239b4c4ff71b24 , Show latest

diff -Naur poppler-0.14.1.orig/poppler/strtok_r.cpp poppler-0.14.1/poppler/strtok_r.cpp
--- poppler-0.14.1.orig/poppler/strtok_r.cpp	2010-07-16 17:29:42.980009118 +0200
+++ poppler-0.14.1/poppler/strtok_r.cpp	2010-07-16 17:29:52.492008746 +0200
@@ -42,143 +42,8 @@
 
 #ifdef __MINGW32__
 #include <string.h>
-#include <stdlib.h>
 
-#define LONG_MAX_32_BITS 2147483647
-
-#ifndef LONG_MAX
-#define LONG_MAX LONG_MAX_32_BITS
-#endif
-
-#define __ptr_t char*
-
-/* Find the first occurrence of C in S.  */
-static char * __rawmemchr (const void * s,int c_in)
-{
-  const unsigned char *char_ptr;
-  const unsigned long int *longword_ptr;
-  unsigned long int longword, magic_bits, charmask;
-  unsigned char c;
-
-  c = (unsigned char) c_in;
-
-  /* Handle the first few characters by reading one character at a time.
-     Do this until CHAR_PTR is aligned on a longword boundary.  */
-  for (char_ptr = (const unsigned char *) s;
-       ((unsigned long int) char_ptr & (sizeof (longword) - 1)) != 0;
-       ++char_ptr)
-    if (*char_ptr == c)
-      return (__ptr_t) char_ptr;
-
-  /* All these elucidatory comments refer to 4-byte longwords,
-     but the theory applies equally well to 8-byte longwords.  */
-
-  longword_ptr = (unsigned long int *) char_ptr;
-
-  /* Bits 31, 24, 16, and 8 of this number are zero.  Call these bits
-     the "holes."  Note that there is a hole just to the left of
-     each byte, with an extra at the end:
-
-     bits:  01111110 11111110 11111110 11111111
-     bytes: AAAAAAAA BBBBBBBB CCCCCCCC DDDDDDDD
-
-     The 1-bits make sure that carries propagate to the next 0-bit.
-     The 0-bits provide holes for carries to fall into.  */
-
-  if (sizeof (longword) != 4 && sizeof (longword) != 8)
-    abort ();
-
-#if LONG_MAX <= LONG_MAX_32_BITS
-  magic_bits = 0x7efefeff;
-#else
-  magic_bits = ((unsigned long int) 0x7efefefe << 32) | 0xfefefeff;
-#endif
-
-  /* Set up a longword, each of whose bytes is C.  */
-  charmask = c | (c << 8);
-  charmask |= charmask << 16;
-#if LONG_MAX > LONG_MAX_32_BITS
-  charmask |= charmask << 32;
-#endif
-
-  /* Instead of the traditional loop which tests each character,
-     we will test a longword at a time.  The tricky part is testing
-     if *any of the four* bytes in the longword in question are zero.  */
-  while (1)
-    {
-      /* We tentatively exit the loop if adding MAGIC_BITS to
-	 LONGWORD fails to change any of the hole bits of LONGWORD.
-
-	 1) Is this safe?  Will it catch all the zero bytes?
-	 Suppose there is a byte with all zeros.  Any carry bits
-	 propagating from its left will fall into the hole at its
-	 least significant bit and stop.  Since there will be no
-	 carry from its most significant bit, the LSB of the
-	 byte to the left will be unchanged, and the zero will be
-	 detected.
-
-	 2) Is this worthwhile?  Will it ignore everything except
-	 zero bytes?  Suppose every byte of LONGWORD has a bit set
-	 somewhere.  There will be a carry into bit 8.  If bit 8
-	 is set, this will carry into bit 16.  If bit 8 is clear,
-	 one of bits 9-15 must be set, so there will be a carry
-	 into bit 16.  Similarly, there will be a carry into bit
-	 24.  If one of bits 24-30 is set, there will be a carry
-	 into bit 31, so all of the hole bits will be changed.
-
-	 The one misfire occurs when bits 24-30 are clear and bit
-	 31 is set; in this case, the hole at bit 31 is not
-	 changed.  If we had access to the processor carry flag,
-	 we could close this loophole by putting the fourth hole
-	 at bit 32!
-
-	 So it ignores everything except 128's, when they're aligned
-	 properly.
-
-	 3) But wait!  Aren't we looking for C, not zero?
-	 Good point.  So what we do is XOR LONGWORD with a longword,
-	 each of whose bytes is C.  This turns each byte that is C
-	 into a zero.  */
-
-      longword = *longword_ptr++ ^ charmask;
-
-      /* Add MAGIC_BITS to LONGWORD.  */
-      if ((((longword + magic_bits)
-
-	    /* Set those bits that were unchanged by the addition.  */
-	    ^ ~longword)
-
-	   /* Look at only the hole bits.  If any of the hole bits
-	      are unchanged, most likely one of the bytes was a
-	      zero.  */
-	   & ~magic_bits) != 0)
-	{
-	  /* Which of the bytes was C?  If none of them were, it was
-	     a misfire; continue the search.  */
-
-	  const unsigned char *cp = (const unsigned char *) (longword_ptr - 1);
-
-	  if (cp[0] == c)
-	    return (__ptr_t) cp;
-	  if (cp[1] == c)
-	    return (__ptr_t) &cp[1];
-	  if (cp[2] == c)
-	    return (__ptr_t) &cp[2];
-	  if (cp[3] == c)
-	    return (__ptr_t) &cp[3];
-#if LONG_MAX > 2147483647
-	  if (cp[4] == c)
-	    return (__ptr_t) &cp[4];
-	  if (cp[5] == c)
-	    return (__ptr_t) &cp[5];
-	  if (cp[6] == c)
-	    return (__ptr_t) &cp[6];
-	  if (cp[7] == c)
-	    return (__ptr_t) &cp[7];
-#endif
-	}
-    }
-}
+#define __rawmemchr strchr
 
 char * strtok_r (char *s, const char *delim, char **save_ptr)
 {

Places

File poppler-0.14.1-strtok.patch of Package mingw64-poppler (Revision a1d96b5c67c82f450c239b4c4ff71b24)

Places