openSUSE Build Service

Overview Repositories Revisions Requests Users Attributes Meta

File mipv6d.init of Package mipv6d (Revision b6b8b30ff9ea92c2c345a2ba515ab45e)

Currently displaying revision b6b8b30ff9ea92c2c345a2ba515ab45e , Show latest

#!/bin/sh
#
# Copyright (c) 2011 SUSE LINUX Products GmbH, Nuernberg, Germany.
#
# This program is free software; you can redistribute it and/or modify it under
# the terms of the GNU General Public License as published by the Free Software
# Foundation; either version 2 of the License, or (at your option) any later
# version.
#
# This program is distributed in the hope that it will be useful, but WITHOUT
# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS
# FOR A PARTICULAR PURPOSE.  See the GNU General Public License for more
# details.
#
# You should have received a copy of the GNU General Public License along with
# this program; if not, write to the Free Software Foundation, Inc., 59 Temple
# Place, Suite 330, Boston, MA 02111-1307 USA
#
# Author: Marius Tomaschewski <mt@suse.de>
# Based on /etc/init.d/skeleton template by Kurt Garloff.
#
# /etc/init.d/mip6d
# /usr/sbin/rcmip6d
#
### BEGIN INIT INFO
# Provides:          mip6d
# Required-Start:    $syslog $remote_fs
# Should-Start:      $time
# Required-Stop:     $syslog $remote_fs
# Should-Stop:       $null
# Default-Start:     3 5
# Default-Stop:      0 1 2 6
# Short-Description: MIPL - Mobile IPv6 for Linux Daemon
# Description:       Start Mobile IPv6 for Linux Daemon
### END INIT INFO

# Shell functions sourced from /etc/rc.status:
#      rc_check         check and set local and overall rc status
#      rc_status        check and set local and overall rc status
#      rc_status -v     be verbose in local rc status and clear it afterwards
#      rc_status -v -r  ditto and clear both the local and overall rc status
#      rc_status -s     display "skipped" and exit with status 3
#      rc_status -u     display "unused" and exit with status 3
#      rc_failed        set local and overall rc status to failed
#      rc_failed <num>  set local and overall rc status to <num>
#      rc_reset         clear both the local and overall rc status
#      rc_exit          exit appropriate to overall rc status
#      rc_active        checks whether a service is activated by symlinks
. /etc/rc.status

# Reset status of this service
rc_reset

# Return values acc. to LSB for all commands but status:
# 0	  - success
# 1       - generic or unspecified error
# 2       - invalid or excess argument(s)
# 3       - unimplemented feature (e.g. "reload")
# 4       - user had insufficient privileges
# 5       - program is not installed
# 6       - program is not configured
# 7       - program is not running
# 8--199  - reserved (8--99 LSB, 100--149 distrib, 150--199 appl)
# 
# Note that starting an already running service, stopping
# or restarting a not-running service as well as the restart
# with force-reload (in case signaling is not supported) are
# considered a success.

# Check for missing binaries (stale symlinks should not happen)
# Note: Special treatment of stop for LSB conformance
mip6d_BIN=/usr/sbin/mip6d
if test ! -x "$mip6d_BIN" ; then
	case $1 in
	stop) ;;
	*)
		echo -n >&2 "$0: \"$mip6d_BIN\" is not an executable file. Exiting."
		case $1 in
		status) rc_failed 4 ;;
		*)      rc_failed 5 ;;
		esac
		rc_status -v
	;;
	esac
	rc_exit
fi
# Check for existence of needed config file
mip6d_CONF=/etc/mip6d.conf
if test ! -s "$mip6d_CONF" ; then
	case $1 in
	stop|status)
		# let kill/checkproc report
	;;
	*)
		echo -n >&2 "$0: \"$mip6d_CONF\" config file missed. Exiting."
		rc_failed 6
		rc_status -v
		rc_exit
	;;
	esac
fi

case "$1" in
    start)
	echo -n "Starting Mobile IPv6 Daemon (mip6d) "
	## Start daemon with startproc(8). If this fails
	## the return value is set appropriately by startproc.
	/sbin/startproc $mip6d_BIN

# Remember status and be verbose
	rc_status -v
	;;
    stop)
	echo -n "Shutting down Mobile IPv6 Daemon (mip6d) "
	## Stop daemon with killproc(8) and if this fails
	## killproc sets the return value according to LSB.
	/sbin/killproc $mip6d_BIN

# Remember status and be verbose
	rc_status -v
	;;
    try-restart|condrestart)
	## Do a restart only if the service was active before.
	## Note: try-restart is now part of LSB (as of 1.9).
	## RH has a similar command named condrestart.
	if test "$1" = "condrestart"; then
		echo "${attn} Use try-restart ${done}(LSB)${attn} rather than condrestart ${warn}(RH)${norm}"
	fi
	$0 status
	if test $? = 0; then
		$0 restart
	else
		rc_reset	# Not running is not a failure.
	fi
	# Remember status and be quiet
	rc_status
	;;
    restart)
	## Stop the service and regardless of whether it was
	## running or not, start it again.
	$0 stop
	$0 start

# Remember status and be quiet
	rc_status
	;;
    force-reload)
	## Signal the daemon to reload its config. Most daemons
	## do this on signal 1 (SIGHUP).
	## If it does not support it, restart the service if it
	## is running.

echo -n "Reload Mobile IPv6 Daemon (mip6d) "
	## if it supports it:
	#/sbin/killproc -HUP $mip6d_BIN
	#touch $mip6d_PID
	#rc_status -v

## Otherwise:
	$0 try-restart
	rc_status
	;;
    reload)
	## Like force-reload, but if daemon does not support
	## signaling, do nothing (!)

# If it supports signaling:
	#echo -n "Reload service mip6d "
	#/sbin/killproc -HUP $mip6d_BIN
	#touch $mip6d_PID
	#rc_status -v
	
	## Otherwise if it does not support reload:
	#
	# => the reload (HUP) handler in mip6d seems to do nothing.
	#
	echo -n "Reload Mobile IPv6 Daemon (mip6d) "
	rc_failed 3
	rc_status -v
	;;
    status)
	echo -n "Checking for Mobile IPv6 Daemon (mip6d) "
	## Check status with checkproc(8), if process is running
	## checkproc will return with exit status 0.

# Return value is slightly different for the status command:
	# 0 - service up and running
	# 1 - service dead, but /var/run/  pid  file exists
	# 2 - service dead, but /var/lock/ lock file exists
	# 3 - service not running (unused)
	# 4 - service status unknown :-(
	# 5--199 reserved (5--99 LSB, 100--149 distro, 150--199 appl.)
	
	# NOTE: checkproc returns LSB compliant status values.
	/sbin/checkproc $mip6d_BIN
	# NOTE: rc_status knows that we called this init script with
	# "status" option and adapts its messages accordingly.
	rc_status -v
	;;
    probe)
	## Optional: Probe for the necessity of a reload, print out the
	## argument to this init script which is required for a reload.
	## Note: probe is not (yet) part of LSB (as of 1.9)

#
	# => mip6d does not write any pid file
	#
	#test $mip6d_CONF -nt $mip6d_PID && \
	echo restart
	;;
    *)
	echo "Usage: $0 {start|stop|status|try-restart|restart|force-reload|reload|probe}"
	exit 1
	;;
esac
rc_exit

Places

File mipv6d.init of Package mipv6d (Revision b6b8b30ff9ea92c2c345a2ba515ab45e)

Places