File PrusaSlicer.changes of Package PrusaSlicer

Overview Repositories Revisions Requests Users Attributes Meta

File PrusaSlicer.changes of Package PrusaSlicer (Revision 7b48c221a7241ec3c75cf8083018daa3)

Currently displaying revision 7b48c221a7241ec3c75cf8083018daa3 , Show latest

-------------------------------------------------------------------
Fri Apr 26 07:16:48 UTC 2024 - Ben Greiner <code@bnavigator.de>

- Don't include stray filesystem/convenience.hpp removed in
  boost 1.85

-------------------------------------------------------------------
Thu Apr 25 13:54:10 UTC 2024 - Ben Greiner <code@bnavigator.de>

- Update to 2.7.4
  * Objects from 3MFs generated by BambuStudio now retain
    multimaterial painting when loaded. BambuStudio saves the data
    under a changed name, but because both the location and meaning
    are the same, PrusaSlicer now tries to load the data under the
    new name when it fails to find the attribute that PrusaSlicer
    has always used. #12502
  * Fix: Downloading files from Printables did not work correctly
    (#12521).
- Fixes in 2.7.3
  ## Bug fixes with respect to 2.7.3-beta1
  * Removed negligible deretractions sometimes emitted into the
    G-code after the recently introduced spiral vase mode
    improvements. While they did not present actual issues with the
    print, they were confusingly shown in the G-code preview.
  ## Bug fixes with respect to 2.7.3-alpha1
  * The z offset configuration option was not correctly accounted
    for when doing the last filament unload above the wipe tower.
  * Fixed crash when importing a specific config bundle while in
    SLA mode.
  * Linux specific: When changing active profile using the dropdown
    in the right panel, the dropdown would stay open when Unsaved
    Changes dialog was shown.
  * The improvements of spiral vase mode handling introduced in the
    previous alpha did not work correctly with absolute extruder
    addressing (#2841 (comment)). They are now only applied with
    relative extruder addressing, otherwise it falls back to the
    old behaviour.
  * After performing a toolchange on the wipe tower, a G-code to
    set layer z is now always emitted. This is to make sure that
    the layer z is correct and that it was not changed in custom
    toolchange G-code. While the user is expected to pass such
    information in the custom G-code, the "z-ensuring" G-code was
    present in previous versions and removing it in 2.7.2 was
    therefore a needless breaking change (#12361).
  * Fixed blobs on the first layer when using ramping travels with
    absolute extruder addressing enabled.
  * Fixed issues with 'avoid crossing perimeters' function
    (#12432). This problem was actually fixed in 2.7.3-alpha1
    already.
  ## Major improvements first seen in 2.7.3-alpha1
  * See
    https://github.com/prusa3d/PrusaSlicer/releases/tag/version_2.7.3-alpha1
    for the full description
  * Improvements of multi-material printing
  * Purging volumes
  * Spiral vase mode improvements
  ## Other improvements with respect to 2.7.2
  * PrusaSlicer is now able to open 3MF files generated by
    BambuStudio and load geometry from them. (#10718, PR #10808,
    thanks to @cmguo). Please note that BambuStudio allows to save
    a 3MF containing G-code only, which is not supported by
    PrusaSlicer and loading of such 3MFs will fail.
  * Metadata of binary G-code have a new item named objects_info,
    which lists all the objects in the print and their boundary
    polygons. The same info was added into the comments at the end
    of ASCII G-codes.
  ## Bugfixes with respect to 2.7.2
  * Pressure equalizer limits were not respected when Dynamic speed
    on overhangs was used (#9485). This is now fixed. Pressure
    equalizer is also not applied after long travels. Many thanks
    to @MGunlogson for providing a fix in his pull request #9622.
  * Fixed a bug resulting in inadequate anchoring of bridging
    extrusions. This bug was introduced in PrusaSlicer 2.6.0.
    #10231, #11500, #11633, #11173, #11117, #9999, #10313, #11150,
    #10493
  * When using Cancel object feature, the marks denoting where one
    object ends and another starts were placed incorrectly. As a
    result, there was a missing deretraction after all travels to
    objects which would normally be printed following the cancelled
    object. The issue was even worse with sequential printing,
    where the uncompensated retractions on the cancelled object
    summed up and could result in filament being unloaded past the
    driving gears.
  * When arcs (G2 and G3 G-codes) were enabled, PrusaSlicer
    generated toolpaths outside the print area in certain cases
    (#12381).
- Increase memory and disk space for building constraints

-------------------------------------------------------------------
Wed Mar 13 19:02:19 UTC 2024 - Frank Kunz <mailinglists@kunz-im-inter.net>

- Update to 2.7.2
  ## Improvements with respect to 2.7.1
  * Multi-material segmentation improvements
  * Color change (M600) improvements
  * Ramping travel improvements
  * SLA overrides
  * Windows specific: The cut tool sometimes produces non-manifold
    meshes. This situation is now detected and the user is advised
    to use Windows repair algorithm on the resulting objects.
  ## Bugs fixes with respect to 2.7.1
  * Fixed incorrect partial arrange in certain cases.
  * Fixing arrange issues with aligning to unprintable objects when
    doing Shift+A.
  * Fixed arrange which sometimes put the wipe tower slightly out of
    bed
  * Fixed UI glitch when setting object dimensions to extremely high
    values.
  * Fixed a bug in generation of brim and skirt preview in the
    preliminary G-code preview (#11821, thanks to @supermerill)
  * Fixed an issue Ctrl+Shift+Tab shortcut, which incorrectly
    collapsed sidebar.
  * Fixed wiggling of Rotate gizmo when moving an object in certain
    cases.
  * Fixed missing updated when moving through dropdown items using
    keyboard arrows.
  * Improve filtering of special characters on Klipper
    EXCLUDE_OBJECT labels (#11802, PR#11813 by @jschuh - thank
    you).
  * Fixed layer change color dialog opening off screen.
  * Fixed occasional crash during thumbnail generation for SLA
    printers.
  * Fixed slicing issues such as missing infills and similar on
    multi part models when sliced with object-specific settings.
  * In SLA mode, it was not possible to use custom file extension
    (configured in Output Settings).
  * Fixed incorrect calculation of wipe length in certain cases,
    leading to shorter wipes than configured.
  * Fixed various issues and UI glitches in text/SVG embossing.
  * Fixed missing update when a new printer was added while a
    physical printer preset was selected.
  * Scrolling of the window was incorrectly performed when using
    mouse wheel over a dropdown.
  * Windows specific: Drop down menus appeared outside of
    PrusaSlicer and could not be opened again.
  * When loading an object from a 3MF, the suggestion to rescale
    the model is not shown, because 3MFs store the information
    about the correct unit (unlike STL files).
  * Fixed an incorrect check of supported OpenGL version, which led
    to a hard crash when OpenGL 3.2 was not available.
  * When loading a 3MF for MM printer, PrusaSlicer offers to load
    individual models as parts of a single object. This dialog did
    not show up for specific geometries.
  * PrusaSlicer did not start on some Windows Server installations
    due to a missing DLL (wlanapi.dll). The library is now loaded
    in runtime and the respective features.
  * Travels with standard lifts (non-ramping) were incorrectly
    generated.
  * With option "Retract on layer change" disabled, there was a
    retraction missing before the first travel on each layer.
  * Variable layer height limits were not applied correctly when
    using multi-extruder printer with different values of min and
    max layer height.
  * When z travel speed was set to zero, it was incorrectly
    exported into the G-code, effectively stopping the print.
    Instead, regular travel speed should have been used for the z
    travel.
  * When Print / Filament / Printer profiles contained different
    values for the same key (which should normally not happen,
    providing the profiles are correct), the misplaced keys could
    have been used instead of the correct ones.
  * Fixed incorrectly applied retraction in vase mode when ramping
    travels were enabled.
  * When using the "No sparse layers" wipe tower, the print head
    sometimes lowered before travelling to the wipe tower, digging
    into an object and destroying the print.
  * Fixed a crash when loading certain AMF files.
  * When specific extruder was set for the wipe tower and z
    position has changed in custom toolchange G-code, the z
    position was not correctly accounted for.

-------------------------------------------------------------------
Fri Dec 29 09:47:16 UTC 2023 - Ben Greiner <code@bnavigator.de>

- Add PrusaSlicer-2.7.1-slic3r-wxWidgets-3.2.4.patch
  * Fixes a compilation error with wxWidgets 3.2.4
  * gh#prusa3d/PrusaSlicer#11769

-------------------------------------------------------------------
Mon Dec 25 13:59:05 UTC 2023 - Ben Greiner <code@bnavigator.de>

- Update to 2.7.1
  ## Improvements fixed with respect to 2.7.0
  * The option Export as binary G-code was removed from Print
    Settings. Instead, there is a new option in Printer Settings
    named Supports binary G-code so it can be set at printer level.
    There is also a new global switch in Preferences->Other, which
    controls whether binary G-code will be generated for printers
    which support it. It is therefore easy to turn the feature on
    or off without doing any changes in profiles (#11734, #11873).
  * Wipe tower weight was added into G-code metadata so it can be
    easily displayed in the print statistics on the printer's
    display.
  ## Bugs fixed with respect to 2.7.0
  * When ramping travels were enabled, sometimes a perimeter was
    missing at the layer where the spiral starts.
  * Fixed a crash when selecting embossed text while an SVG tool is
    opened (#11759).
  * Helical layer changes could result in out of bed moves
    (#11754).
  * Helical layer change was enabled even when there was no
    retraction on layer change (#11709, #11761).
- Release 2.7.0
  * This is the stable release of PrusaSlicer 2.7.0, introducing
    SVG emboss, binary G-codes, ramping travels, support for G2/G3
    G-codes, support for Cancel object function and much more. It
    also fixes many bugs.
  * Important note for Original Prusa MINI, MK4 and XL owners: The
    new configuration update of our system profiles will enable
    binary G-code and G2/G3 features. Users using older firmware
    need to update to 5.1.0-alpha2 or later or manually turn these
    features off. On older firmware, new binary G-code is not
    visible or recognized and the G2/G3 G-codes may not work
    perfectly.
  * Travel moves improvements
  * SVG embossing tool (#6916, #9373)
  * G2 and G3 G-code support #4352
  * Binary G-code
  * Improved user interface
  * Custom G-code editor
  * Cancel object (Marlin, RRF and Klipper)
- D PrusaSlicer-2.6.0-wxWidgets-CheckResizerFlags-assert-fix.patch

-------------------------------------------------------------------
Fri Sep 15 19:03:08 UTC 2023 - Ben Greiner <code@bnavigator.de>

- Update to 2.6.1
  * When renaming a preset to a name containing non-ASCII
    characters, the encoding was mangled. This is now fixed
    (#11232).
  * Supports are no longer shown when using the clipping plane in
    SLA supports tool.
  * Fixed a crash when displaying command line help (#11060).
  * Two tooltips in the Cut tool dialog were shown with mangled
    encoding in some languages (#11236).
  * The Help menu in PrusaSlicer was extended with "Sample G-codes
    and Models" item, which navigates the user to the respective
    page on our website where these assets can be downloaded.
  * The Help menu was extended with "Quick Start" item, which
    navigates the user to the beginner's guide on our website.
- Drop PrusaSlicer-pr11154-fix-cgal-c++-error.patch
- Drop PrusaSlicer-drop-wx3.0.patch

-------------------------------------------------------------------
Tue Aug 29 07:23:22 UTC 2023 - Ben Greiner <code@bnavigator.de>

- Add PrusaSlicer-pr11154-fix-cgal-c++-error.patch
  * gh#prusa3d/PrusaSlicer#11154
  * Fixes error on CGAL 5.6

-------------------------------------------------------------------
Sun Aug 20 16:01:37 UTC 2023 - Ben Greiner <code@bnavigator.de>

- Limit to CGAL < 5.6 as it introduced breaking changes which
  PrusaSlicer is not compatible yet
- Disable failing ix86 build

-------------------------------------------------------------------
Fri Jul 21 10:32:11 UTC 2023 - Ben Greiner <code@bnavigator.de>

- Require wxWidgets >= 3.1.6
  * Add PrusaSlicer-drop-wx3.0.patch
  * gh#prusa3d/PrusaSlicer#11026, gh#prusa3d/PrusaSlicer#11027

-------------------------------------------------------------------
Sun Jul  9 14:30:54 UTC 2023 - Ben Greiner <code@bnavigator.de>

- BuildRequire nanosvg-devel >= 2022.12.22
  * only the fltk fork has nsvgRasterizeXY()

-------------------------------------------------------------------
Wed Jul  5 14:13:11 UTC 2023 - Hans-Peter Jansen <hpj@urpla.net>

- disable slic3r_jobs_tests.cpp, as it fails sometimes
- PrusaSlicer-2.6.0-wxWidgets-CheckResizerFlags-assert-fix.patch
  applied

-------------------------------------------------------------------
Tue Jul  4 17:16:14 UTC 2023 - Hans-Peter Jansen <hpj@urpla.net>

- Update to version 2.6.0
  * too many changes to list here, you may want to check:
    https://github.com/prusa3d/PrusaSlicer/commits/version_2.6.0
  * PrusaSlicer-boost1.79.patch was applied upstream: removed
  * PrusaSlicer-cereal.patch was applied upstream: removed
  * gentoo-887055-boost-fix.patch was applied upstream: removed
  * new dependencies: nanosvg (new package), glu and glew
  * more sed fiddling required for system expat and qhull support
  * PrusaSlicer-2.6.0-octoprint-name-fix.patch added to work around
    compile error: cast lambda expressionn to same type
  * wxWidgets 3.0 is not supported anymore (even project states
    otherwise). Let's hope, it will work with 3.2 better now.
    upstream is using a patched 3.1 version.

-------------------------------------------------------------------
Fri Apr 21 15:04:55 UTC 2023 - Klaus Kämpf <kkaempf@suse.com>

- Update to version 2.5.2
  * contains profiles for Original Prusa MK4 printer

- Update to version 2.5.1
  * 'Monotonic lines' top/bottom fill pattern
  * It is now possible to set acceleration separately for external
    perimeters, solid infill and top solid infill (Print Settings->
      Speed->Acceleration control)
  * Original Prusa XL specific: Arrangement into the corner
  * Fixed a crash sometimes occurring when slicing very detailed models
  * Added Original Prusa XL profiles

-------------------------------------------------------------------
Tue Jan 31 18:34:16 UTC 2023 - Ben Greiner <code@bnavigator.de>

- Add gentoo-887055-boost-fix.patch
  * Fix build error with boost-filesystem 1.81
  * gh#prusa3d/PrusaSlicer#9294
  * https://bugs.gentoo.org/887055

-------------------------------------------------------------------
Sun Jan  1 17:25:36 UTC 2023 - Ben Greiner <code@bnavigator.de>

- Update up-occt-version.patch
  * Allow any version for openCASCADE
  * Luckily, the package compiles with recently updated occt v7.7

-------------------------------------------------------------------
Sat Oct 29 11:35:55 UTC 2022 - Ben Greiner <code@bnavigator.de>

- Update to version 2.5.0
  * Arachne perimeter generator
  * Lightning infill
  * Pressure equalizer
  * STEP file import
  * various smaller features and bugfixes
  * Big changelog since v2.4.2, most changes decribed in alpha and
    beta release notes:
    https://github.com/prusa3d/PrusaSlicer/releases
- Add up-occt-version.patch

-------------------------------------------------------------------
Mon Sep  5 17:17:49 UTC 2022 - Hans-Peter Jansen <hpj@urpla.net>

- Quoting Lucas Matena (see gh#prusa3d/PrusaSlicer#8299, issue 2): 
  if you link PrusaSlicer 2.5.x with wxWidgets 3.2, you will most
  likely break it: link against wxWidgets 3.0.5

-------------------------------------------------------------------
Mon Aug  1 15:42:40 UTC 2022 - Ben Greiner <code@bnavigator.de>

- Add PrusaSlicer-cereal.patch -- gh#prusa3d/PrusaSlicer#7809

-------------------------------------------------------------------
Tue May 31 19:04:00 UTC 2022 - Ben Greiner <code@bnavigator.de>

- Disable test_voronoi -- rh#2059646

-------------------------------------------------------------------
Sun May  8 10:03:57 UTC 2022 - Ben Greiner <code@bnavigator.de>

- Update to version 2.4.2
  * SLA mode incorrectly handled 3MFs from 3rd party software,
    resulting in misplaced SLA support points and holes in some
    cases (#6100, #7359, #7189, #7826, #7659). This is very old
    issue.
  * Vase mode preview did not show in cases when Custom Start
    G-Code lacked moves in Z #8032
  * When loading a 3rd party 3MF using drag and drop. PrusaSlicer
    no longer asks if the 3MF shall be loaded as a project (which
    makes no sense since it contains no config) and loads the
    geometry only
  * Using the Layer Height Modifier with the wipe tower was
    impossible with multiple objects. The wipe tower reported that
    the layer height profile is different, even though it was in
    fact set the same on all objects (#7711, #7903, #8044)
  * Fixed a crash on "Convert from/to units" when several objects
    were selected
  * Automatic color change for logo crashed PrusaSlicer in certain
    cases (when a one-layer object was present) #8156
  * Linux specific: Fixed a crash on opening projects in some cases
    (#8078, #8097)
  * Added Snapmaker bundle (Snapmaker A250, Snapmaker A350). Based
    on https://github.com/nivekmai/snapmaker-prusa by @nivekmai,
    @WilliamBosacker, @mrworf
  * Added profiles for Zonestar printers (Z5, Z6, Z5X, Z8, Z9),
    based on slic3r/slic3r-profiles#19 by @ZONESTAR3D
  * Fixed a crash when Unsaved Changes dialog attempted to show a
    modified config option which is not available in current mode
    (e.g. Start G-Code in Simple mode). #7905
  * Fixed a bug that when the user was closing the application and
    replied 'Yes' in the dialog asking about unsaved project while
    also checking 'Remember my choice', it made it impossible to
    close PrusaSlicer in the next runs when there were no objects
    in the plater #8076, #8122
  * Loading of a G-Code in G-Code Viewer or loading config from
    G-Code file sometimes failed because of a bug in parsing of the
    configuration block at the end.
  * Fixed incorrect rendering of some characters used in the
    recently updated Simplified Chinese translation #8171
  * Fixed incorrect number of toolchanges reported in "Sliced Info"
    box when wipe tower was used. The annotations of toolchanges in
    G-Code were also numbered wrong #8186
  * Fixed a crash when using the "Import SL1 Archive" function and
    either cancelling the dialog or confirming a non-existing file
    #8175
  * Recycling symbols in Shape Gallery were mirrored so the user
    does not have to flip them when using them as negative volumes
    at the base of the print (which is the usual use case). Also,
    PLA recycling symbol was added #7800

-------------------------------------------------------------------
Mon Apr 25 11:27:58 UTC 2022 - Ben Greiner <code@bnavigator.de>

- Refresh PrusaSlicer-boost1.79.patch with upstream's fix
  * gh#prusa3d/PrusaSlicer#8238

-------------------------------------------------------------------
Sun Apr 24 09:26:22 UTC 2022 - Ben Greiner <code@bnavigator.de>

- Add PrusaSlicer-boost1.79.patch avoiding the deprecation
  of boost::filesystem::ofstream in Boost 1.79
  * gh#prusa3d/PrusaSlicer#8238

-------------------------------------------------------------------
Tue Apr 12 12:59:51 UTC 2022 - Hans-Peter Jansen <hpj@urpla.net>

- Use gcc version 10 for anything but Tumbleweed

-------------------------------------------------------------------
Tue Apr 12 06:41:47 UTC 2022 - Adrian Schröter <adrian@suse.de>

- Use gcc version 10
  This allows the build on Leap 15.3/15.4 and in Factory using the same
  compiler.
- Add buildignore to libglfw3-wayland to fix building for 15.3

-------------------------------------------------------------------
Fri Mar 18 11:44:17 UTC 2022 - Ben Greiner <code@bnavigator.de>

- Update to 2.4.1
  * Big changelog since v2.4.0, most changes decribed in alpha and
    beta release notes:
    https://github.com/prusa3d/PrusaSlicer/releases
  * introducing G-Code Substitutions
  * fixing bugs found in 2.4.0 release

-------------------------------------------------------------------
Fri Dec 24 14:39:28 UTC 2021 - Ben Greiner <code@bnavigator.de>

- Update to 2.4.0
  * Big changelog since v2.3.3, most changes decribed in alpha and
    beta release notes:
    https://github.com/prusa3d/PrusaSlicer/releases
  * Send system info: new dialog for telemetry. Opt-in.
- Drop patches
  *  PrusaSlicer-catch2upd.patch
  *  PrusaSlicer-issue6681-openvdb.patch
  *  PrusaSlicer-pr6590-updateTBB.patch

-------------------------------------------------------------------
Tue Nov 23 11:21:48 UTC 2021 - Ben Greiner <code@bnavigator.de>

- Make compatible with TBB 2021
  * add FindTBB.cmake -- gh#prusa3d/PrusaSlicer#7332
  * add PrusaSlicer-pr6590-updateTBB.patch
    gh#prusa3d/PrusaSlicer#6590

-------------------------------------------------------------------
Fri Sep 24 07:53:45 UTC 2021 - Ben Greiner <code@bnavigator.de>

- Add PrusaSlicer-catch2upd.patch
  * gh#prusa3d/PrusaSlicer#6518
  * Update of Catch2 test framework from v2.13.3 to v2.13.6
  * Fixes build failure due to change of MINSIGSTKSZ in glibc 2.34

-------------------------------------------------------------------
Mon Aug 30 11:37:03 UTC 2021 - Ben Greiner <code@bnavigator.de>

- Add PrusaSlicer-issue6681-openvdb.patch
  * gh#prusa3d/PrusaSlicer#6681
  * ilmbase-devel is now provided by openexr-devel
  * OpenVDB's FindOpenVDB.cmake requires blosc-devel

-------------------------------------------------------------------
Fri Jul 16 15:22:48 UTC 2021 - Ben Greiner <code@bnavigator.de>

- Update to v2.3.3
  * fix a bug in handling FDM multi-material project and
    configuration files.

-------------------------------------------------------------------
Fri Jul  9 16:08:39 UTC 2021 - Ben Greiner <code@bnavigator.de>

- Update to v2.3.2
  * Introducing support for the new Prusa SL1S SPEED masked
    SLA printer, Prusa CW1S firmware updater, PrusaLink
    host type for Prusa i3 MK3 printers, Monotonic infill
    for all solid layers, better support for reading
    configurations of newer PrusaSlicer releases, new 3rd
    party printer profiles and a handful of bug fixes.
- Switch to bundled GLEW -- gh#prusa3d/PrusaSlicer#6396

-------------------------------------------------------------------
Tue Apr 20 10:50:45 UTC 2021 - Ben Greiner <code@bnavigator.de>

- Update to v2.3.1
  New 3rd party printer profiles
  * Multiple Creality printers profiles were added (Ender-3 Max,
    Ender-4, Ender-6, CR-5 Pro, CR-5 Pro H, CR-6 SE, CR-6 Max,
    CR-10 Max, CR-200B, CR-8), thanks @pmjdebruijn.
  * Added Artillery printer profiles (Sidewinder X1, Genius),
    thanks @SzabolcsHornyak.
  * Added INAT printer profiles, thanks @MarkINAT.
  * Updated Anycubic Kossel bed texture (thanks @brunosso) and
    Anycubic Kossel bed STL.
  Vulnerability issues fixed
  * The Talos Cisco Intelligence Group did a great job identifying
    potential security issues in loading invalid and potentially
    malicious AMF and 3MF files, see their vulnerability reports
    TALOS-2020-1222 and TALOS-2020-1218. We fixed these two
    potential security issues with this release of PrusaSlicer.
  Bugs fixed with respect to PrusaSlicer 2.3.0
  * Reduced number of hits shown by the "Find config option"
    dialog, fixed case insensitive search for non-Latin1 languages
    #5202.
  * Fixed G-code preview with coloring by a tool and visualization
    of travels enabled #6095.
  * Fixed opening of drop down menus at the bottom of the screen
    on multi-monitor setups #2999 #5911 #5957. This issue has been
    fixed by us in wxWidgets and accepted by the upstream.

-------------------------------------------------------------------
Mon Jan 11 18:43:08 UTC 2021 - Benjamin Greiner <code@bnavigator.de>

- Update to v2.3.0 
  * Introducing paint-on supports, ironing, monotonic 
    infill, seam painting, adaptive and support cubic 
    infill, print time per feature analysis, standalone 
    G-code viewer application, better auto-arrange with a 
    customizable gap and rotation, search function for the 
    settings, reworked "Avoid crossing perimeters" function, 
    physical printers (network settings), many new 3rd party 
    printer profiles and much, much more.
- Full Changelog entries for betas and release candidates:
  https://github.com/prusa3d/PrusaSlicer/releases
- Drop PrusaSlicer-pr4340-boost-1-73.patch merged upstream

-------------------------------------------------------------------
Sun Dec 20 20:12:40 UTC 2020 - Benjamin Greiner <code@bnavigator.de>

- Remove extra PrusaSlicer.desktop. Use upstream's desktop files. 
  Graphics;3DGraphics seems to be the consensus now.
- Remove wrapper gh#prusa3d/PrusaSlicer#4691

-------------------------------------------------------------------
Tue Sep  1 21:20:26 UTC 2020 - Benjamin Greiner <code@bnavigator.de>

- support boost >= 1.73
  * PrusaSlicer-pr4340-boost-1-73.patch gh#prusa3d/PrusaSlicer#4340
  * fixes gh#prusa3d/PrusaSlicer#4264

-------------------------------------------------------------------
Tue Sep  1 11:46:30 UTC 2020 - Benjamin Greiner <code@bnavigator.de>

- enforce GDK_BACKEND=x11 by indroducing the same wrapper as Fedora
  gh#prusa3d/PrusaSlicer#4691

-------------------------------------------------------------------
Thu Aug 20 15:50:07 UTC 2020 - Benjamin Greiner <code@bnavigator.de>

- revert the memoryperjob change. The build process really acquires
  that much memory per job and the workers cannot provide 3GB per
  CPU core. Sadly, we are limited by memory not by CPU cores.
- require 11 GB of RAM. This allows us to run 3 jobs in parallel and
  can be provided by all architectures

-------------------------------------------------------------------
Thu Aug 20 09:03:33 UTC 2020 - Martin Liška <mliska@suse.cz>

- Use memoryperjob constraint instead of %limit_build macro.
- Use only 1GB for memoryperjob.

-------------------------------------------------------------------
Mon Aug 10 08:12:10 UTC 2020 - Stefan Brüns <stefan.bruens@rwth-aachen.de>

- Use wxGTK3 instead of wxWidgets (GTK2), for better HiDPI and
  Wayland support.

-------------------------------------------------------------------
Tue Jun 16 12:09:13 UTC 2020 - Benjamin Greiner <code@bnavigator.de>

- This is mainly a cosmetic update so that the package gets rebuilt
  in Factory. Rebuild is needed because of wxWidgets - boo#1172750
- Add openvdb-tools package for better cmake reporting.
- Make the 32-bit floating point workaround more readable.
  gh#prusa3d/PrusaSlicer#3781

-------------------------------------------------------------------
Fri Apr 24 07:24:26 UTC 2020 - Dominique Leuenberger <dimstar@opensuse.org>

- BuildRequire pkgconfig(libudev) instead of libudev-devel: allow
  OBS to shortcut through -mini flavors.

-------------------------------------------------------------------
Sat Mar 21 22:08:07 UTC 2020 - Benjamin Greiner <code@bnavigator.de>

- update to version 2.2.0 
  introducing SLA hollowing and hole drilling, support for 3rd party 
  printer vendors, 3Dconnexion support, automatic variable layer height, 
  macOS dark mode support, greatly improved ColorPrint feature and much, 
  much more.
  See https://github.com/prusa3d/PrusaSlicer/releases/tag/version_2.2.0
  and the changelogs for the release candidates, betas and alphas since
  2.1.1 for a complete list of changes.
- reactivate parallel builds, but need strong enough workers and reserve 
  4G of memory per thread (memory-constraints, %limit_build)
- new build dependencies: cgal, ilmbase, more of boost, libudev, openvdb

-------------------------------------------------------------------
Wed Dec 11 10:24:01 UTC 2019 - Benjamin Greiner <code@bnavigator.de>

- update to version 2.1.1
  - integrating the Prusa Mini printer into the 
    installation wizard
  - 3D scene thumbnails are newly generated and exported 
    into the G-code to be displayed on the Prusa Mini 
    printer's display
- use Graphics;3DGraphics for non Tumbleweed distros

------------------------------------------------------------------- 
Fri Sep 13 19:34:47 UTC 2019 - Benjamin Greiner <code@bnavigator.de>

- final 2.1.0 
- symlink icon files instead of duplicate copy

-------------------------------------------------------------------
Sat Sep  7 15:00:17 UTC 2019 - Benjamin Greiner <code@bnavigator.de>

- new version 2.1.0-rc 
- remove obsolete patch file
- tag localization files
- remove stray Noto font file, add as dependency
- outsource Desktop file creation
- move Desktop category to "Science;Construction"

-------------------------------------------------------------------
Mon Jul 29 11:30:21 UTC 2019 - Benjamin Greiner <code@bnavigator.de>

- Clean up specfile according to declined submit request 718985
  - Remove non-devel BuildRequires
  - Move icons to icons/hicolor
- build with -j1 as otherwise x64 build is stuck

-------------------------------------------------------------------
Fri Jul 26 15:25:15 UTC 2019 - Benjamin Greiner <code@bnavigator.de>

- use new patch from upstream 
  (see https://github.com/prusa3d/PrusaSlicer/pull/2676)
- use Education;Construction as long as boo#1074711 is not resolved

-------------------------------------------------------------------
Tue Jul 23 11:29:49 UTC 2019 - Benjamin Greiner <code@bnavigator.de>

- initial specfile

Places

File PrusaSlicer.changes of Package PrusaSlicer (Revision 7b48c221a7241ec3c75cf8083018daa3)

Places