Sign Up
Log In
Log In
or
Sign Up
Places
All Projects
Status Monitor
Collapse sidebar
home:bmwiedemann:reproducible:distribution:ring1
libgphoto2
libgphoto2.changes
Overview
Repositories
Revisions
Requests
Users
Attributes
Meta
File libgphoto2.changes of Package libgphoto2
------------------------------------------------------------------- Sat Sep 2 09:59:49 UTC 2023 - Marcus Meissner <meissner@suse.com> - updated to 2.5.31 release ptp2: * do better event queueing during capture (makes capture faster, avoids losing events) * Canon EOS: OLC logic rewritten to be table driven, more debugging of the content, config "testolc" to generate debugoutput. Supports more cameras better. * Canon EOS: various bugfixes * Sony Alpha: Added config options: focusarea, liveviewsettingeffect * Olympus: Enabled OM-1 capture * Battery Level: also support ENUM style battery reporting for Canon * Nikon 1: S1 also does not support everything * Sony Alpha: small changes in config setters * merged some improvements from NorthOfYou fork for Canon EOS, Nikon and Sony * New ids: - Canon EOS 850D, R7, R10, R5 C, R6m2 - Fuji X-H2, X-T5 - GOPRO HERO 11 BLACK, 11 BLACK mini - new ids also imported from libmtp - Nikon Z30, Z8 - OMSYSTEM OM-1 - Pentax KP (PTP mode) - Ricoh GR IIIx - Sigma fp L - Sony A7S III, ILCE-1, ILME-FX3, 7RM5 aka A7-RV, digigr8: * fixed init to not switch to webcam mode pentax: * Added Pentax KP general: * disable log formatting when we are not logging (speeds up large downloads, as we are not hex dumping the whole data and immediately discard the result) * libltdl usage now thread-safe. (some other library pieces are not threadsafe yet) * some time_t 32bit vs 64bit fixes * some cleanups and warning fixes translations: * updated swedish, spanish * added georgian, friulian - libgphoto2-enable-vusb-ptp.patch: upstream ------------------------------------------------------------------- Mon Jul 10 11:01:53 UTC 2023 - Ludwig Nussel <lnussel@suse.com> - drop lockdev support (boo#1212801) ------------------------------------------------------------------- Mon Apr 24 07:19:55 UTC 2023 - Marcus Meissner <meissner@suse.com> - libgphoto2-enable-vusb-ptp.patch: enable virtual PTP camera in vusb ------------------------------------------------------------------- Sat Apr 22 19:43:26 UTC 2023 - Christopher Yeleighton <giecrilj@stegny.2a.pl> - added %bcond_with vusb in case anyone needs a test drive ------------------------------------------------------------------- Sat Jul 2 09:39:31 UTC 2022 - Marcus Meissner <meissner@suse.com> - updated to 2.5.30 release - ptp2: * Canon: fixed display locking/unlocking after exit * generic: avoid potential crash on image addition * Sony: Add image information when wait_for_event, some config values added * Added IDs: * Nikon Zfc, Z9 * Sony DSC-WX220, Alpha-A7 IV * Nikon P950 * Canon EOS Rebel T8i * Fuji Fujifilm X-E4 * GoPro HERO10 Black - general: * fix parallel builds by requiring gettext 0.19.1 for builds from git (PR #797) * add gp_init_localedir() function to allow for non-standard installations (PR #796) - translations: * updated traditional chinese ------------------------------------------------------------------- Tue Apr 19 12:44:54 UTC 2022 - Marcus Meissner <meissner@suse.com> - use https urls ------------------------------------------------------------------- Sat Mar 5 13:49:53 UTC 2022 - Marcus Meissner <meissner@suse.com> - updated to 2.5.29 release general: * fixes build failures of libgphoto2 frontends and builds using the wrong libgphoto2 headers (issue #717) ptp2: * fixed a regression in Fuji preview capture which would lead to crashes * made the wait-event property extractor more robust (it sometimes gets NULL ptrs), hopefully fixing Sony crashes * sony: fixed a crash in sony f-number * panasonic: added more configs adjustgm, adjustab, colortemp, afmode, mfadjust, expmode, recording * fixed some bugs caused by refactoring / memory leak fixes * added: - Kodak m531 - HP Photosmart E331 - Nikon DSC 6 translations: * updated polish, ukrainian, russian, serbian * added romanian ------------------------------------------------------------------- Mon Jan 3 12:40:27 UTC 2022 - Marcus Meissner <meissner@suse.com> - updated to 2.5.28 release general: * OS/2 support removed (broken and unused since at least 2006) * remove built-in rpm packaging (use distro packaging instead) * remove linux-hotplug rule creation (removed from distros around 2006) * remaining text which was iso-8859 is UTF-8 now (except one po file) * To override docdir and htmldir, use configure arguments --docdir= and --htmldir= instead of --with-doc-dir= and --with-html-dir= * some code cleanups, especially handling of include files and i18n handling ptp2: * wait event * property changes now reported with "'name' to 'value'" added * object info changes now reported as FILE_CHANGED events (e.g. if you change protection flags) * Nikon J1: capture fixed * Olympus: fixed that wait time was twice as long as required if no events arrived * Sigma Fp: added basic beta support for capture, live view and config. * Sony: * mark all widgets as read-write again, read-only logic was not 100% correct * speed-ups and fixes to the stepping based config setting * Canon EOS * handle newer EOS R series reporting of configs (ISO, Aperture, Shutterspeed) * track UI lock state to avoid device busy reports * fixed "zoom" range settings (for lenses with powered zoom, also for today Powershot) * Fuji: * ptpip improvements * bug fixes * some Fuji cameras have now liveview only for webcam (need new firmware) * various small fixes and code cleanups * New ids: * Sony Alpha-RX1R II, ILCE-7C, ZV-E10, A6600, DSC HX-80, ILCE-7RM3A, ILCE-7RM4A, DSC-A7S III * Nikon Coolpix B500, Zfc * Canon EOS M50m2, Digital IXUS 132 * Fuji X-Pro3, GFX 100S, X100V canon: * fixed wait event crashes * correctly mark read only config widgets as read-only pentax: * fix PEF raw files for non-K100D translations: * updated german, french, polish, ukrainian ------------------------------------------------------------------- Mon Oct 18 14:27:17 UTC 2021 - Marcus Meissner <meissner@suse.com> - split out libgphoto2_port for now to meet new shared library policy requirements. bsc#1191764 ------------------------------------------------------------------- Sun Feb 21 12:11:08 UTC 2021 - Marcus Meissner <meissner@suse.com> - updated to 2.5.27 release ptp2: * report filesizes larger than 4GB correctly * download files larger than 4GB * empty ptp strings are reported as "", not as NULL * report more MTP object properties * Nikon * download of files larger than 4GB using getpartial object method * handle new application mode * handle new eventex fetcher on Z series * fixed movie on recent Z series * report liveview and movie prohibit conditions, as errors and also in configuration tree * some Nikon 1 V1 enhancements (the first camera of the 1 series is a bit special) * report filesize > 4GB correctly, if possible * Canon EOS: * EOS M6 Mark 2 is actually more like a EOS DSLR and fully capable, added some work * Handle OLCINFO for M6 Mark 2 and EOS R5 and new cameras * added current list of autoexposuremode to expose also Fv and friends * Canon Liveview size is encoded in "output" (PC / MOBILE / MOBILE2 variants are the different livesizes), try to expose seperately as "liveviewsize" * decode more options, nickname, eosmoviemode (color/bw), strobofiring, eventmode, flashcharged, oneshotrawon * bugfixes * Sony Alpha: * report f-numbers enum with fixed list * fixed liveview taking on a new model * Panasonic * implement liveviewsize * implement movie recording ( using --set-config movie=1/0 ) * more doc and minor fixes * ptp/ip: allow building on Windows * New IDS: * Sony DSC-A7S III * Nikon Coolpix P1000, Z6_2, Z7_2 * Olympus E-M1 MII * Canon PowerShot G12, EOS M200 * Fuji Fujifilm X-S10 * Ricoh Theta V, Z1 canon: * more shutterspeed reported translations: * updated french ------------------------------------------------------------------- Sun Oct 11 17:27:31 UTC 2020 - Marcus Meissner <meissner@suse.com> - updated to 2.5.26 release ptp2: * Olympus OMD: fixed the 65 second wait after capture. * Canon EOS: * bugfixes * Nikon * D3000, D3100, and D3200 "static opcode list" reduced after reports what works and what not * Nikon 1 series cameras had some commands listed too much. * Nikon 1 J5 improvements * "liveviewsize" can change liveviewsize * Sony: * Modern Sony cameras seem to require a 3 second wait on startup. Seems needed on ZV-1, A7 R4, RX100 M7 so far... Unsure why. * correct shutterspeed, iso and exposurebias decoding for Sony A7r4 and other new models * some bugfixes in property settings, trying to speed it up * ZV-1 support, some additional startup wait hack to make it work. * partial Sony QX support added, can do preview... close to having capture (but not there yet) (also added "liveviewsize") * report read/write and read/only of properties correctly * Fuji X: * stabilized normal capture code * added bulb capture, added autofocusdrive * lots of properties listed now, some also decoded * added "liveviewsize", "shuttercounter", "colortemperature", "lensname", "devicename", "imagecomment", "filmsimulation", "colorspace" * Added very experimental Wifi support. * synced new libmtp device ids * Cameras added to id list: * Sony QX30U, ZV-1, DSC-RX100M7 * Nikon D780, Z5, Coolpix B700 * Panasonic GMC-GX8 * Canon EOS 1D X Mark III, R5, R6 * Canon PowerShot SX70HS * Fuji FinePix X-E1 * Sigma fp pentax: * small changes synced from pktriggercord, added Pentax 645Z docupen: * new experimental driver, supports the docupen scanner pen. all: * more fuzzing related stability fixes, largely to "outdated" driver set. * lots of compiler warnings fixes across the codebase translations: * update pl, sv, uk, zh_CN, fr ------------------------------------------------------------------- Sat Jun 6 16:41:51 UTC 2020 - Marcus Meissner <meissner@suse.com> - baselibs.conf: requires libgphoto2-6-xxbit, libexif-devel-xxbit and libusb-1_0-devel-xxbit from libgphoto2-devel-xxbit (bsc#1172301) ------------------------------------------------------------------- Sun May 24 15:29:54 UTC 2020 - Marcus Meissner <meissner@suse.com> - updated to 2.5.25 release - ptp2: * Liveview support for Leica SL * PTP 1.1 Streaming parameters added. * Olympus OMD capture fixes * Nikon DSLR/Z: * various improvements to liveview error reporting. * much more properties added, some values added * allow downloading of "large thumbnails" instead of "regular thumbnails", can be selected by "thumbsize" gphoto2 local setting. * fixes for D3000, D3100 methods * maximum capture wait extended to 1000 seconds (as the D870 has 900 seconds max now) * Canon EOS * initialization fixes (if it breaks your EOS M or PowerShot, please report) * liveview enablement fixed * maximum capture wait extended to 90seconds * EOS R shutterspeed , aperture reporting fixed * various bugfixes * Cameras added to id list: * Sony NEX 5 * Canon EOS 90D * Fuji XT-4 * Sanyo VPC-FH1 * Leica SL Typ 601 - lumix: * fixed initialisation, might help capture - all: * ongoing stability fixes from AFL fuzzing - translation updates: * sv ------------------------------------------------------------------- Sun Feb 23 16:19:14 UTC 2020 - Marcus Meissner <meissner@suse.com> - updated to 2.5.24 release - ptp2: * GoPro: fixed all images not visible bug * Canon EOS: lock/unlock ui before more operations * Canon Powershot SX / EOS M: some setup adjustments to make powershot sx work better * Nikon Keymission 170: try override opcodes to allow capture * Nikon DSLR: fixed a regression where 5 seconds was longer image capture shutterspeed * Sony: adjusted manualfocusing not to autofocus * Fuji: access ISO config * Sony: fixed manual focusing * Sony: specify capturetarget on camera, available on current 2019/2020 Sony * bugfixes * New ids added: * Sony Alpha RX100V, A7s, RX0 II, * Nikon Z50, Coolpix L810, KeyMission 170 * Canon PowerShot SX530HS, SX 620HS, * Canon EOS 2000D, 1500D, R2, M6 Mark 2, 250D, * Fuji X-A5, X-E3, GFX100 * GoPro Hero 7 White, 7 Silver, 7 Black, 8 Black - lumix: * New WIFI Lumix camera driver was added, using curl and libxml2. Lots of abilities supported already, also capture preview. However capture itself is not yet working. This driver needs libxml2 and libcurl to be built. - all: * Selecting camera libraries has changed a bit. --camlibs=everything will select all and outdated drivers --camlibs=standard will select "current day" drivers --camlibs=standard,outdated will select "current day" and "outdated" drivers You can now also use modifiers like +canon or -canon to enable/disable selected camera libraries. The default is "standard", same as before. * fixed some issues found by AFL fuzzing, mostly in "outdated" drivers. * SECURITY.md: Small document added describing security properties of the library. ------------------------------------------------------------------- Tue Feb 4 22:48:55 UTC 2020 - Bjørn Lie <bjorn.lie@gmail.com> - No longer recommend -lang: supplements are in use. ------------------------------------------------------------------- Sun Jun 2 12:48:38 UTC 2019 - Marcus Meissner <meissner@suse.com> - updated to 2.5.23 release - ptp2: * Sony capture stability and speed improvements * Canon EOS capture stability improvements, reduce partial read blobs from 5MB to 1MB * Canon EOS M image format unpacking adjustments * Olympus OMD: bulb capture added, trigger capture capable * Panasonic GH5: added manualfocusdrive, capturetarget * Canon PowerShot X work ... trying to support / improve stability of capture * PTP string packing adjusted to standard (empty and null strings) * New ids added: * Sony Alpha A68, RX100M6, DSC-WX350 * Nikon Coolpix L100 * Canon PowerShot G7X, G9X Mark II * Canon Rebel T6, EOS 2000D * Fuji X-A2, GFX 50R, XT-30 * Ricoh WG-M2 * libmtp ids synced. - pentax: * synced smaller parts with pktriggercord - translations: * updated danish - fuzzing: * vusb and sample-afl now able to fuzz all USB cameras (even if slow) - all: * Various crashes fixed that were found during AFL fuzzing the USB drivers ------------------------------------------------------------------- Tue Jan 1 16:57:19 UTC 2019 - meissner@suse.com - updated to 2.5.22 release - ptp2: * Canon EOS M / PowerShot capture problem solved * Sony shutterspeed - provide a static list as the camera does not provide one, you can set also different values * Canon SDRAM capture, try to support more than 500MB of images at once * New USB Ids added: * Canon EOS R, 800D * Canon PowerShot SX600HS, SX740HS * Sony DSC RX0, RX100-M5A * Nikon DSC D3500 - generic: * handle new "bind" udev event in udev rule generator. - translations: * updated polish, ukrainian ------------------------------------------------------------------- Sat Dec 8 20:24:33 UTC 2018 - meissner@suse.com - updated to 2.5.21 release ptp2: * Nikon Z series support added * New Canon Powershot SX / GX also support capture, ALPHA support added * Canon EOS bugfixes * imported IDs from libmtp * Added: * Nikon Z6, Z7 * Canon Powershot SX720HS, G5X * Canon IXUS 185 ------------------------------------------------------------------- Sat Oct 27 16:22:24 UTC 2018 - meissner@suse.com - updated to 2.5.20 release - ptp2: * Canon EOS: fixed regression for some EOS series in OLC decoding * Apple iPhone: disabled PTP Manifest reading again, as IOS seems not to follow the standard * bugfixes * new IDs added: * Sony Alpha-RX10M4 * Canon EOS M50, 4000D * Fuji XT-3 * synced new MTP ids from libmtp - pentax: * refreshed from pktriggercord - translations: * updated polish, ukrainian, swedish, danish ------------------------------------------------------------------- Sun Jul 22 19:48:27 UTC 2018 - meissner@suse.com - updated to 2.5.19 release - ptp2: * Canon EOS: handle OLC versions of newer models, which gave incorrect aperture/shutterspeed values * Fuji X series capture improvements. * Fuji X series live view support added. * Panasonic GH5 liveview and capture support. (Needs camera firmware 2.3 or newer) * Olympus E-M5 Mark II and E-M1 Mark II liveview and capture support added. * USB IDs added: * Sony Alpha A99 M2, A7 III, A9 * Nikon Coolpix A900 * Panasonic GH5 * Olympus E-M1 Mark 2 * Fuji X-H1, X-M1, X70, X30 - all: various fixes for warnings from compilers and the coverity scanner ------------------------------------------------------------------- Fri Jul 13 11:39:14 UTC 2018 - meissner@suse.com - updated to a 2.5.18.1 snapshot after Hackweek: - newer EOS cameras better OLC information support - better support for Fuji X series cameras, liveview and capture ------------------------------------------------------------------- Sun May 13 17:07:02 UTC 2018 - meissner@suse.com - updated to 2.5.18 release (bsc#1091309) - ptp2: Canon EOS: Fixed file download on several EOS brands, broken by 2.5.17 release. - pentax: Added K01 and K70 models. ------------------------------------------------------------------- Mon Apr 16 19:02:33 UTC 2018 - meissner@suse.com - updated to 2.5.17 release - ptp2: * Apple iOSX: handle root directory objects that have ParentObject==StorageID instead of 0 * implement PTP 1.1 Manifest reading and hook into filesystem. currently only supported by Apple iOS. * Canon PowerShot CHDK live view support. * Canon EOS: prepare capture needs to wait a bit on a crucial place to get all events. might fix some PTP Device Busy reports. * Canon EOS: split bulk downloads into pieces of partial downloads. This might cure the Error 70. * Canon EOS: Improved EOS M capture * Canon CHDK: live preview capture support added * Added USB IDs: * Sony A7r III * Nikon CoolPix L430 * Nikon D850 * Canon EOS M2, M6, M100 * Canon EOS 6D Mark II * Fuji Film X-Pro 2 - pentax: * Code updates imported from pkremote - libgphoto2: * Report file changes via GP_EVENT_FILE_CHANGED (hooked up for Canon EOS currently) - translations: * updates spanish, chinese ------------------------------------------------------------------- Mon Oct 16 11:49:07 UTC 2017 - meissner@suse.com - updated to 2.5.16 release - ptp2: emergency bugfix as a previous bugfix broke some detection features ------------------------------------------------------------------- Mon Oct 2 18:07:03 UTC 2017 - jengelh@inai.de - Avoid running fdupes across partitions. Replace old tar options, old RPM shell variables by new constructs. Rectify RPM groups. Make macro style consistent again. ------------------------------------------------------------------- Mon Oct 2 16:38:09 UTC 2017 - meissner@suse.com - updated to 2.5.15 release - ptp2: * fuji: Fix cameras without new capture properties. * Canon EOS: config aspectratio, highisonr * Canon EOS: emit CAPTURECOMPLETE event * Canon EOS: whitebalanaceadjustment is 32bit signed, not 16bit signed * usb: better error feedback * fixed some bugs found by AFL fuzzing * Added USB ids: * Sony: A6500, HX400V * Nikon: D500, D7500 * Olympus: VR360 * Canon PowerShot: ELPH 350 HS * Canon EOS: 200D, Rebel T7i * Fuji: GFX 50 S * Ricoh Theta S, Theta SC - libgphoto2_port/vusb: * now default disabled as it confused people, enable with --enable-vusb - libgphoto2-fix-fuji.patch: upstreamed ------------------------------------------------------------------- Sun Jul 16 13:34:04 UTC 2017 - meissner@suse.com - libgphoto2-fix-fuji.patch: check before using a ptp property that is only available in some updated Fuji cameras (bsc#1048853) ------------------------------------------------------------------- Mon Jun 5 18:58:54 UTC 2017 - meissner@suse.com - updated to 2.5.14 release * ptp2: * Canon EOS M remote control / capture support (M3, M5, M10 ... but not the original EOS M currently) * fix for Canon EOS camera crash bug introduced in 2.5.13. * Fuji XT-2 capture support (firmware update needed, might work for other Fuji XT too) * Canon EOS 77D added. * various bugfixes * added USB IDs: * Sony DSC-RX10M3, DSC-HX90V * Sony UMC-R10C * Nikon D5600, * Canon EOS 77D * Fuji XT-20 * synced MTP device ids from libmtp * more issues fixed that were found by the AFL fuzzer * pentax: * Added Pentax K5-II, Pentax K3-II * libgphoto2_port: * fixed gp_log_remove_func * libgphoto2_port/vusb: * support f-number, shutterspeed, and exposurebias in the virtual PTP camera * all: * several issues found by gcc 7 fixed * translations: * updated ukrainian, polish, vietnamese, french, swedish ------------------------------------------------------------------- Sat Apr 8 15:52:34 UTC 2017 - meissner@suse.com - updated to 2.5.13 release See below in 2.5.12.1 pre relase, also: pentax: * Now using the pktriggercord codebase * lots of improvements * Please report missing Pentax K USB ids that are supported by pktriggercord! ------------------------------------------------------------------- Tue Mar 21 16:33:10 UTC 2017 - meissner@suse.com - updated to 2.5.12.1 temporary snapshot ptp2: * iPhone iOS 10.2 storage handling fixed, added dynamic storage handling * Sony Alpha Live View support. * Canon EOS M series capture enabled. (might not fully work yet) * Various crashes and endless loops fixed that were found by the AFL fuzzer. * Various bugfixes in Nikon, Canon capture * New USB Ids: * Sony: SLT A37, DSC-RX100M5 * Nikon KeyMission 360 * Canon PowerShot G16 * Canon EOS M5 * Fuji Fujifilm XT-2 * GoPro Hero 5 Black ------------------------------------------------------------------- Thu Jan 5 17:15:43 UTC 2017 - meissner@suse.com - updated to 2.5.12 release ptp2: * Canon EOS: more fixes for Canon EOS 5D Mark IV and Canon EOS 80D. * Parrot Sequoia support and property decoding * Nikon 1: Fixed Nikon 1 capture * Sony Alpha: various bugfixes. * New USB IDs: * Nikon Coolpix AW130 * Nikon DSC D3400 * Parrot Sequoia * GoPro Hero, Hero4 Silver, Hero + * bugfixes and cleanups canon: * fixed zoom on some older Canon Powershots translations: * updated polish, ukrainian, vietnamese, danish, french, svensk ------------------------------------------------------------------- Sun Nov 20 21:23:15 UTC 2016 - meissner@suse.com - updated to 2.5.11 release * canon: * not experimental anymore, for some years * some bugfixes in configuration handling * ptp2: * canon: EOS capture improvements, also supporting new EOS * sony: tethering and trigger capture implemented, capture stability improvements * sony: exposure compensation setting fixed * sony: capture and autofocus configurations, similar to eosremoterelease * generic: fixed serialnumber retrieval * nikon: "autofocus" config variable for global autofocus enable/disable (default on, default liveview off) * various bugs fixed, stability improved * ptpip: allow different event ports. --port ptpip:IP:dataport:eventport * New ids reported: - Sony Alpha 7, DSC-RX100M4, NEX-7, DSC-HX20V, Alpha 6300, A7S II, A7, - Nikon DSC Df, D7200, D5, D810A, 1 V3 - Canon EOS 1Dx Mark 3, 80D, 5D Mark IV - Canon Digital IXUS 180 - various music players / android phones imported from libmtp * libgphoto2: * Speed up initial startup. * Win32: store settings in the "User Profile\.gphoto\settings" and not in C:\\Windows anymore. * gp_widget_changed() no longer clears the "changed" state to make this API more consistent. Use gp_widget_set_changed(widget,FALSE) to do so. * examples: * sample-photobooth: a sample program handling tethering, SIGUSR1 driven capture and SIGUSR2 based configuration reading. * sample-afl: code to inject afl fuzzing data * translations: * updated swedish, ukrainian, polish, finnish, russian, danish, polish, brazilian, serbian, dutch, chinese - libgphoto2-newjpeg.patch: removed, upstream ------------------------------------------------------------------- Tue Jul 5 20:12:20 UTC 2016 - toddrme2178@gmail.com - Fix Group tag. ------------------------------------------------------------------- Thu Jun 9 14:29:12 UTC 2016 - meissner@suse.com - require: udev in the library package for the hwdb refresher bsc#982339 ------------------------------------------------------------------- Thu Jun 9 13:55:38 UTC 2016 - meissner@suse.com - libgphoto2-newjpeg.patch: jpeg_mem_src gets a const buffer now in new libjpeg-turbo. ------------------------------------------------------------------- Wed Mar 23 21:12:13 UTC 2016 - meissner@suse.com - updated to 2.5.10 release libgphoto2: * added gp_camera_list_config, gp_camera_get_single_config, gp_camera_set_single_config additional configuration APIs for faster access to single configuration values. ptp2: * allow generic opcode commands with parameters, config variable "opcode" * fixed pretending that Nikon Coolpix S series is a Nikon 1 S. * Nikon: fixed problem with SDRAM capture * Canon EOS: handle "no focus" during capture * Canon EOS: handle --new correctly * Canon Powershot: handle lack of object protection setting * Ricoh Theta: support shutterspeed configuration * added size checking to PTP unpacking primitives * various bugfixes * New ids: * Imported Media Players and Android phones from libmtp * Sony Alpha A7S II, ILCE 7M2 * Kodak Z990 * Nikon Coolpix L840, S3600 * Leica SL * Olympus TG-620, E-M5 Mark 2 * Canon EOS 1D C, 750D * Canon IXUS 160 * Fuji Film X-T1, X-T10, A-610 pentax: * fixed some crashes on non-existing config variables * use portable directory api (helps Visual Studio) libgphoto2_port/vusb: * Implemented a virtual PTP camera for test purposes. libgphoto2_port/disk: * Support exfat fuse filesystems. all: * fixed various issues found by Coverity static analyzer * removed unistd.h headers where not needed to help Visual Studio translations: * updated swedish, brazilian portuguese, danish, polish, ukrainian, vietnamese ------------------------------------------------------------------- Tue Dec 29 21:09:48 UTC 2015 - stefan.bruens@rwth-aachen.de - Several changes/fixes to packaging: * API documentation was packaged twice, once in the -devel package and once in the main package (under different paths), split off to separate libgphoto2-devel-doc package * Use apidocs from source tar instead of using doxygen * package user documentation in separate libgphoto2-doc package * remove obsolete hotplug scripts ------------------------------------------------------------------- Wed Nov 18 21:47:59 UTC 2015 - meissner@suse.com - updated to 2.5.9 release Now maintained (source and issue tracker) in GIT at https://github.com/gphoto/libgphoto2 ptp2: * PTP/IP: fixes to support Ricoh Theta and Sony Alpha over WLAN better * unification of timeout with backoff handling * Canon EOS: fixed a timeout bug on wait_event * Canon EOS: report protection status correctly * Canon EOS: unlock the ui on close * Sony: bulb mode support (in manual mode, shutterspeed and bulb option) * Hook up PTP OpenCapture opcode * Nikon J5 support. Nikon now hides prop and opcodes even differently. * Added USB IDs: - Sony SLT A77V, A7R2, HDR-PJ260VE - Nikon DSLR D5500 - Canon EOS 760D, 5Ds, 5Ds R - Nikon Coolpix AW110, S6300, S6800, S3700, S2900 - Nikon 1 S2, J5 - Ricoh Theta m15 (USB and WLAN) - GoProp Hero 4 canon: readd old Canon IXUS 30. translations: updated ukrainian, vietnamese, polish, italian ------------------------------------------------------------------- Sun Sep 20 08:51:30 UTC 2015 - meissner@suse.com - add -devel to baselibs for use to build wine in 64bit environments ------------------------------------------------------------------- Fri Aug 7 07:39:31 UTC 2015 - dimstar@opensuse.org - Change udev BuildRequires for pkgconfig(udev) - use pkg-config --modversion udev instead of querying the package database. udev is often installed as udev-mini in OBS' build env, which the rpm -q udev call could not find. ------------------------------------------------------------------- Sun Jul 5 21:36:34 UTC 2015 - meissner@suse.com - updated to 2.5.8 release - all: * Missing COPYRIGHT headers added. * Bug fixes for issues detected by Coverity. - ptp2: * Canon Powershot/IXUS CHDK support Install the CHDK firmware and then use "gphoto2 --set-config chdk=On" to enable. * Canon EOS: Implemented new capture method for new Canon EOS to avoid hangs. * Canon EOS: New configuration variable: continuousaf * Canon EOS: event output for focusinfo / focusmask * Nikon DSLR: New configuration variables: movieiso, movieshutterspeed, moviehighisonr * Nikon Coolpix A: also manually add override opcodes for capture (please report if it works) * New USB ids: Sony: DSC-HX60V, Alpha-A7S, Alpha-A77 M2, Alpha A5100 Panasonic: DMC-LS2 Canon EOS 7D Mark II, Canon EOS M3 Canon Powershot SX520 HS Fuji Fujifilm X-E2 Samsung NX1 * Media Player IDs synced with the libmtp ID database. * Lots of bugfixes. - libgphoto2_port/libusb1: * Prefer libusb1 over libusb0 if both are present. * Asynchronous interrupt handling, to avoid losing usb interrupts during other operations. - libgphoto2.keyring: replaced by my new 4096 bit key ------------------------------------------------------------------- Fri May 1 12:55:34 UTC 2015 - meissner@suse.com - disable libusb 0.1, as it is no longer needed and will cause hangs. bsc#926862 ------------------------------------------------------------------- Sun Jan 25 18:22:27 UTC 2015 - meissner@suse.com - remove all the .la files, improves startup time. ------------------------------------------------------------------- Sun Jan 18 21:45:22 UTC 2015 - meissner@suse.com - 2.5.7 release ptp2: * Canon EOS focusinfo crash fixed (affected all config operations) * wait_for_event sleep backoff increased (50 - 100 - 150 - 200ms) * Nikon: fixes to make Nikon Coolpix S9700 over PTPIP work better * Nikon: WLAN GUID setting * Sony: tighten event loop to avoid loss of objectadded events * New USB ids: Nikon Coolpix 9400, Nikon S9700, Pentax K3 (in PTP). pentax: * added Pentax K100Ds * added raw capture support packaging: * fixed missing libexif in pkgconfig translations: * updated ukrainian, vietnamese, french, polish ------------------------------------------------------------------- Sun Dec 21 20:14:41 UTC 2014 - meissner@suse.com - 2.5.6 release ptp2: * Nikon D3000/D3100/D3200: It hides the "good" capture opcodes from the DeviceInfo. Override and add them. If you see capture bugs, please report with debuglogfile. * "exposurecompensation" now in correct size (-3.0 <-> 3.0 usually) * Canon EOS: decode and report "focusinfo" variable that outputs the focus information of the camera. * Canon EOS: autofocusdrive=0 and cancelautofocus=1 added to cancel autofocusing, to avoid blocking the camera. * Canon EOS: "eosviewfinder" renamed to "viewfinder" * Sony SLT: Make property setting work for "iso", "exposurecompensation", "f-number", "shutterspeed" * Canon EOS: crash on 700D fixed * Nikon DSLR: race condition on object addition handled better * Nikon DSLR: make sure we make a pause a bit during polling after capture. * IDs added: Nikon: Coolpix P7800, S1, J4 Nikon: D3300, D610, D4s, D810, D750 Canon: IXUS 125HS, PowerShot Elph340HS Leica M9 * various bugfixes libgphoto2_port/usb1: * fixed a memory leak * api changed for gp_log_data to make smaller debuglogs possible ------------------------------------------------------------------- Thu Sep 18 21:07:46 UTC 2014 - meissner@suse.com - 2.5.5.1 release - regression with nikon coolpix s fixed - canon eos has no zoom - more fixes and translation updates ------------------------------------------------------------------- Sun Aug 17 18:18:11 UTC 2014 - meissner@suse.com - 2.5.5 release - ptp2: Nikon 1 support. Final fix to get it running by Raj Kumar of archive.org. Nikon: liveview capture without autofocus enhanced, now also for card Nikon: restart liveview after capture Canon EOS: New property reporting method (OLC Info) implemented. Print read-only values in configuration table lookup (for Canon EOS mostly) Sony: Fixed Sony SLT-A900v capture Fixed the various "datetime" hooks for PTP generic, Canon Powershot and Canon EOS to hopefully work better. --set-config datetime=now sets the camera to the current time. CHDK: some changes New ids: Nikon DSC D3x, D5300 Nikon Coolpix P330 Canon PowerShot S95, S120, SX260HS, SX280HS, SX160IS, A2500, A2600, Elph135, IXUS 300HS, IXUS 255HS Canon EOS 1200D Sony DSC-A900, Alpha 6000, DSC-HX5V Casio EX-ZR700, Fuji FinePix AV-150, T200 Massive logging and error handling cleanup by Axel Waggershauser cleanup of the USB data handling Bugfixes - st2205: add support for a new type of 240x320 picture frames - all: Massive logging and error handling cleanup by Axel Waggershauser. Various cleanups from David Berrange for mingw32 builds. fixed libgd detection and linking. - print-camera-list add a mode to print udev rules for the non-standard USB support (usbscsi/usbdisk), needed additional to HWDB databases. - translations: updated ukrainian, vietnamese, polish, french, finish, chinese, danish, dutch, ------------------------------------------------------------------- Fri Jun 27 21:19:09 UTC 2014 - meissner@suse.com - updated to 2.5.4.1 snapshot 2014/06/27 - fixed generation of udev rules bnc#884514 - new D7100 configuration tables - Nikon D5300 id added ------------------------------------------------------------------- Fri Jun 13 13:42:01 UTC 2014 - meissner@suse.com - updated to 2.5.4.1 snapshot 2014/06/13 - Nikon 1 capture working - various canon eos fixes and improvements - readded PTP matcher rule to UDEV rules - translation updates ------------------------------------------------------------------- Sun Apr 27 18:52:40 UTC 2014 - meissner@suse.com - updated to 2.5.4.1 snapshot - more nikon 1 fix work - generate udev rules for /dev/sg* again ------------------------------------------------------------------- Thu Apr 24 09:54:12 UTC 2014 - dmueller@suse.com - remove dependency on gpg-offline (blocks rebuilds and tarball integrity is checked by source-validator anyway, plus it was commented out) ------------------------------------------------------------------- Sun Mar 23 18:23:52 UTC 2014 - meissner@suse.com - updated to 2.5.4 release - sony slt support - nikon bulb support - other nikon, canon, olympus improvements - lots of bugfixes and various new ids ------------------------------------------------------------------- Mon Jan 13 08:13:00 UTC 2014 - meissner@suse.com - updated to 2.5.3.1 final hotfix - fixed ptp matcher - updated french, dutch, russian, ukrain translation ------------------------------------------------------------------- Fri Jan 10 21:24:25 UTC 2014 - meissner@suse.com - updated to 2.5.3 final - bugfixes, Coverity and other fixes - new USB ids - hwdb support fixed (bnc#852551) - unified all names, especiall Canon S100 (bnc#856828) - pentax updates - reenabled gpg checking ------------------------------------------------------------------- Mon Sep 30 12:22:48 UTC 2013 - fcrozat@suse.com - Replace udev rules with udev hwdb for openSUSE 13.1 or later (more efficient). - Fix udev hwdb installation and ensure udev hwdb is updated when package is installed / updated / uninstalled. ------------------------------------------------------------------- Mon Aug 19 14:57:20 UTC 2013 - meissner@suse.com - updated to 2.5.2.1 temporary snapshot - new udev hwdb - new Nikon capture functions for newer Nikons - Olympus 3030 fixed - several new USB ids - translation updates - lots of other bugfixes - disabled gpg key checking for snapshot ------------------------------------------------------------------- Mon May 6 08:24:24 UTC 2013 - meissner@suse.com - buildrequire libxml2-devel for olympus e-series. ------------------------------------------------------------------- Sun May 5 20:54:22 UTC 2013 - meissner@suse.com - Updated to 2.5.2 ptp2: * Fixed Raspberry Pi and USB 3.0 "connect only once" problem. * Experimental Olympus E-series (not Pen) remote control support. Try in "Control" mode. * Nikon DSLR: real movie capture! (use --set-config movie=1/0 and --wait-event) * New ids: Sony: DSC-A900, SLT-A350, DSC-RX1, HX300, NEX-3N Nikon Coolpix: P80, L820, S9500, S620, P520, S2500, S2600 Nikon Coolpix A Nikon DSLR: D2Xs, D4, D7100 Nikon J2 Canon Powershot: S100, A1300IS, A2300IS, Canon EOS: 700D, 100D Fuji FinePix: H20EXR, X20 Samsung: NX1000, EK-GC100 Also various MTP device ids merged from libmtp. * ptpip: major/minor number was switched in init packet. * Nikon DSLR: out of focus during capture fixed, various bugfixes * Nikon "controlmode" config for unlocking the camera. * Canon DSLR: "keepdeviceon" pinging in get_config, liveview * Canon thumbnail retrieval fixed. * Lots of work on getting Olympus E-series DSLRs in Control mode to run. canon: * wait-for-event: handle when camera goes offline during waiting. * fixed mtime 0 (Jan 1 1970) issue when downloading files and using --filename sierra: * Fixed the Nikon Coolpix 4300 and 2500 USB over SCSI capture mode. * Ignore register 4 read errors after capture as Nikon does not supply them. * added commented code on how to switch the Coolpix 2500 to RAW DIAG mode. libgphoto2_port: * gp_port_reset functionality to do a port reset. libgphoto2_port/usbscsi: * Use timeout supplied by driver, not hardcoded 1.5 seconds (fixes Nikon sierra capture). translations: * updated ukrainian, finish, dutch, polish, russian, french, vietnamese, german build: * specify lots of _BSD_SOURCE et.al. to make the strict MacOS ports build happier. Might break non Linux platforms, please report this. * libxml2 needed for Olympus E series capture support. * cleaned up AM_CPPFLAGS/CPPFLAGS usage, do not use both of them together. ------------------------------------------------------------------- Mon Apr 15 09:27:50 UTC 2013 - mmeister@suse.com - Added url as source. Please see http://en.opensuse.org/SourceUrls ------------------------------------------------------------------- Tue Jan 29 09:40:26 UTC 2013 - meissner@suse.com - updated to 2.5.1.1 bugfix version - ptp2: fixed 32bit platforms - ax301: fixed buffer overread ------------------------------------------------------------------- Sun Jan 27 21:26:56 UTC 2013 - meissner@suse.com - updated to 2.5.1 final version - more fixes in the wait-event, capture preview and regular capture code for Canon and Nikon. - some new camera ids added ------------------------------------------------------------------- Wed Jan 9 14:07:32 UTC 2013 - meissner@suse.com - updated to 2.5.0.2 temp snapshot - various new ids - various bugfixes - Canon driver fixes - PTP driver fixes: Canon EOS thumbnail fixes - translation updates ------------------------------------------------------------------- Wed Oct 17 12:44:36 UTC 2012 - fcrozat@suse.com - fix build with new udev rules location ------------------------------------------------------------------- Wed Oct 3 16:23:37 UTC 2012 - coolo@suse.com - fix previous change ------------------------------------------------------------------- Sat Sep 22 16:54:39 UTC 2012 - meissner@suse.com - split to libgphoto2-6 to allow parallel installation with old libgphoto2 (2.4) and to follow shared lib convention. ------------------------------------------------------------------- Fri Sep 21 18:18:24 UTC 2012 - jengelh@inai.de - Parallel build with %_smp_mflags - .la files for plugins are useless - remove them ------------------------------------------------------------------- Thu Sep 13 08:45:14 UTC 2012 - meissner@suse.com - Updated to major release 2.5.0 - more dynamic lists (no more fixed limits) - libgphoto2 api adjustments to make it more sane, binary incompatible - new .so version 6 ------------------------------------------------------------------- Wed Aug 1 12:31:43 UTC 2012 - meissner@suse.com - fixed one missed gp_devs = NULL which led to more crashes bnc#771743 ------------------------------------------------------------------- Thu Jul 19 18:40:18 UTC 2012 - meissner@suse.com - added 2.4 branch fixes - libusb1: do not crash immediately (avoid global context usage) - canon: --wait-for-event append \0 to filename - ptp2: new USB ids, fixed Canon EOS thumbnail retrieval ------------------------------------------------------------------- Thu Jul 12 07:58:37 UTC 2012 - meissner@suse.com - generate v 175 udev rules (basically will use internal usb_id now) ------------------------------------------------------------------- Sun Apr 15 23:15:29 CEST 2012 - meissner@suse.de - 2.4.14 release - Canon EOS 5D Mark III support - Samsung Galaxy support restored - bugfixes ------------------------------------------------------------------- Tue Feb 21 18:03:48 CET 2012 - meissner@suse.de - 2.4.12.1 temp snapshot - various libusb 1.0 fixes (including last one merged) - EOS fast directory listing ------------------------------------------------------------------- Sat Feb 18 22:59:56 UTC 2012 - dimstar@opensuse.org - Add libgphoto2-libusb.patch: Fix initialization of libusb 1.0. The initialization of libusb was not always done with the default context and if not done with the default context, the right one needs to be passed to subsequent calls. ------------------------------------------------------------------- Wed Jan 25 10:37:10 UTC 2012 - meissner@suse.com - Updated to 2.4.12 final release. - libusb 1.0 support - canon and nikon capture enhancements - lots of bugs fixed - lots of new devices - updated translations ------------------------------------------------------------------- Sun Dec 11 14:13:06 CET 2011 - meissner@suse.de - do not explicitly require libusb 0.1 in pkgconfig file - some more bugfixes ------------------------------------------------------------------- Tue Nov 29 11:39:03 CET 2011 - meissner@suse.de - Updated to 2.4.11.2 temp snapshot - libusb 1.0 support - changed canon powershot event handling - fixed several bugs - added new devices ------------------------------------------------------------------- Sat Nov 19 15:57:21 UTC 2011 - coolo@suse.com - add libtool as buildrequire to avoid implicit dependency ------------------------------------------------------------------- Mon May 30 17:06:35 CEST 2011 - meissner@suse.de - disable hal support completely for 12.1 bnc#697024 ------------------------------------------------------------------- Tue Apr 19 15:09:27 CEST 2011 - meissner@suse.de - Updated to the 2.4.11 release - lots of PTP fixes for Canon and Nikons. - sierra mode now uses SCSI wrapping directly. - fixes also in other drivers - lots of new USB ids - translations updates ------------------------------------------------------------------- Tue Aug 31 09:50:22 UTC 2010 - aj@suse.de - Recommend instead of require lang package since it's not mandatory. ------------------------------------------------------------------- Sun Aug 15 20:04:51 CEST 2010 - meissner@suse.de - Updated to 2.4.10 release - lots of PTP and EOS related fixes - shortcuts in UDEV rules - new jl2005c driver for small cameras - translation updates ------------------------------------------------------------------- Mon Jun 21 16:43:41 CEST 2010 - meissner@suse.de - bump maximum file limit to 4096, as 2.5 is not ready yet bnc#439065 - Fixed some bugs in the ptp2 drivers. ------------------------------------------------------------------- Sat May 8 10:24:20 CEST 2010 - meissner@suse.de - build against lockdev-devel ------------------------------------------------------------------- Tue Apr 27 08:54:31 CEST 2010 - meissner@suse.de - remove the major .la files ------------------------------------------------------------------- Sun Apr 11 23:25:39 CEST 2010 - meissner@suse.de - Updated to 2.4.9 final release - more EOS and other PTP fixes - more picture frame fixes ------------------------------------------------------------------- Thu Mar 25 09:48:06 CET 2010 - meissner@suse.de - disable hal inclusion - updated to temp snapshot 2.4.8.1 - new usbdiskdirect driver for certain picture frames - new libgd dependency for picture frame - new picture frame driver - lots of PTP fixes and enhancements ------------------------------------------------------------------- Mon Jan 25 11:21:22 CET 2010 - meissner@suse.de - updated to version 2.4.8 - Lots of improvements to EOS and Nikon capture support - fuji s5 pro capture support - several new ids - stability fixes - translation updates ------------------------------------------------------------------- Tue Dec 22 19:03:10 CET 2009 - jengelh@medozas.de - package baselibs.conf ------------------------------------------------------------------- Sat Nov 21 19:42:05 CET 2009 - meissner@novell.com - 2.4.7.3 tempsnapshot ------------------------------------------------------------------- Mon Oct 12 17:04:31 CEST 2009 - meissner@suse.de - tag mediaplayers correctly in the new style UDEV model. ------------------------------------------------------------------- Sat Sep 26 11:34:46 CEST 2009 - meissner@suse.de - 2.4.7.1 temp snapshot - directory bugfix to allow fileretrieval with unix fds - translation updates - various ptp stabilizing bug fixes ------------------------------------------------------------------- Mon Aug 17 13:12:04 CEST 2009 - meissner@suse.de - 2.4.7 final release - just small cleanups compared to last ------------------------------------------------------------------- Tue Aug 11 18:25:34 CEST 2009 - meissner@suse.de - 2.4.6.6 temp snapshot - fixed udev v 136 rule generation - 2.4.6.5 temp snapshot - more ptp improvements - generate UDEV 3rd generation rules (for gudev) ------------------------------------------------------------------- Mon Jul 27 11:41:52 CEST 2009 - meissner@suse.de - 2.4.6.4 temp snapshot - lots of Canon EOS improvements in capture support - New ids for PTP2 - lots of PTP2 bugfixes and improvements - bugfixes ------------------------------------------------------------------- Tue May 26 10:51:54 CEST 2009 - meissner@suse.de - updated to 2.4.6.1 temp snapshot - various Canon EOS bug fixes/improvements - new ids ------------------------------------------------------------------- Sun May 17 22:53:28 CEST 2009 - meissner@suse.de - Updated to 2.4.6 final (just some small stuff) ------------------------------------------------------------------- Mon May 11 12:52:50 CEST 2009 - meissner@suse.de - updated to 2.4.5.3 temp snapshot - fixed Canon old EOS repeated capture - added Canon new EOS LiveView in --capture-preview - more Canon new EOS properties - various bugfixes and new ids. ------------------------------------------------------------------- Thu Apr 2 20:45:05 CEST 2009 - meissner@suse.de - updated to 2.4.5 release - various EOS capture fixes - varios Nikon capture fixes - Nikon LiveView support ------------------------------------------------------------------- Sat Mar 14 14:01:01 CET 2009 - meissner@suse.de - updated to temp snapsot 2.4.4.3 - various ptp2 driver bugfixes in capture areas - gphoto filesystem rewritten to be dynamic and without LRU corruption ------------------------------------------------------------------- Thu Jan 22 00:48:10 CET 2009 - meissner@suse.de - updated to 2.4.4 release - minor bugfixes done for the release ------------------------------------------------------------------- Tue Jan 20 23:17:52 CET 2009 - meissner@suse.de - updated to interim 2.4.3.3 branch snapshot "all bugs fixed" :) - fixed a long standing LRU bug leading to memory corruptions - fixed a canon capture to card bug. - more nikon props - bugfixes ------------------------------------------------------------------- Mon Jan 12 16:45:34 CET 2009 - meissner@suse.de - updated to interim 2.4.3.2 branch snapshot - lots of changes in the ptp2 driver: - new USB ids - hidden nikon property support for newer DSLRs - canon and nikon capture support enhanced - bugfixes and speedups - translation updates ------------------------------------------------------------------- Wed Dec 10 12:34:56 CET 2008 - olh@suse.de - use Obsoletes: -XXbit only for ppc64 to help solver during distupgrade (bnc#437293) ------------------------------------------------------------------- Thu Oct 30 12:34:56 CET 2008 - olh@suse.de - obsolete old -XXbit packages (bnc#437293) ------------------------------------------------------------------- Sun Oct 19 22:21:01 CEST 2008 - meissner@suse.de - updated to 2.4.3 final stable release - Canon EOS tethered capture support - lots of bugfixes - new translations ------------------------------------------------------------------- Mon Oct 6 17:45:57 CEST 2008 - meissner@suse.de - upgraded to intermittent svn snapshot - ptp2 bugfixes and new ids - moved more ids from canon to ptp2 driver - backported fixes from trunk - sierra storage info mode - examples started ------------------------------------------------------------------- Tue Sep 9 23:49:38 CEST 2008 - meissner@suse.de - upgraded to 2.4.2.1 stable snapshot - lots of bugfixes and new ids - disable some incorrect USB ids for Mass Storage Only devices - merged ptp2 driver from TRUNK - byteswapping using <endian.h> ------------------------------------------------------------------- Tue Aug 19 16:45:35 CEST 2008 - lnussel@suse.de - remove resmgr from buildrequires ------------------------------------------------------------------- Thu Jul 17 18:57:08 CEST 2008 - schwab@suse.de - Fix byteswap macros. ------------------------------------------------------------------- Sun Jul 13 23:34:02 CEST 2008 - meissner@suse.de - upgraded to 2.4.2 stable release - more ids, more bugfixes backmerged ------------------------------------------------------------------- Sat Jul 5 08:30:08 CEST 2008 - meissner@suse.de - upgraded again to current svn state - fixes in canon capture handling - autoreconf for everything ------------------------------------------------------------------- Sat Jun 28 10:04:02 CEST 2008 - meissner@suse.de - updated to current 2.4.1.3 branch state - ptp2 driver backmerged - bugfixes for new libtool/automake/autoconf - bugfixes and translations ------------------------------------------------------------------- Sun Apr 13 18:34:15 CEST 2008 - meissner@suse.de - fixed glibc 2.8 problem with re_compile_pattern. - fixed one topfield problem ------------------------------------------------------------------- Fri Apr 11 13:41:22 CEST 2008 - meissner@suse.de - updated to current 2.4.1.2 branch state - topfield pvr added ------------------------------------------------------------------- Thu Apr 10 12:54:45 CEST 2008 - ro@suse.de - added baselibs.conf file to build xxbit packages for multilib support ------------------------------------------------------------------- Tue Apr 1 14:36:09 CEST 2008 - meissner@suse.de - updated to current 2.4 branch state - large startup speedup - Canon EOS capture mode fixes ------------------------------------------------------------------- Fri Mar 28 22:28:03 CET 2008 - meissner@suse.de - updated to final 2.4.1 release - small bugfixes - translations updates ------------------------------------------------------------------- Wed Mar 19 16:31:18 CET 2008 - meissner@suse.de - updated to current 2.4.0.99 BRANCH state - ptp2 driver lots of bugfixes and lots of new ids - canon driver timeout fix - disk.so suppression of known network fs - suppress Olympus mass storage id - hal patch upstreamed ------------------------------------------------------------------- Tue Mar 11 21:25:28 CET 2008 - schwab@suse.de - Fix configure script. ------------------------------------------------------------------- Tue Mar 4 08:32:00 CET 2008 - meissner@suse.de - use info.subsystem in our FDI files. ------------------------------------------------------------------- Fri Feb 29 16:54:38 CET 2008 - meissner@suse.de - fixed biarch problem introduced by last fix. ------------------------------------------------------------------- Fri Feb 29 14:54:24 CET 2008 - meissner@suse.de - remove version checks for suse10.0, remove one line that rpmlint does not like from a pkgconfig file. ------------------------------------------------------------------- Thu Sep 13 09:53:25 CEST 2007 - stbinner@suse.de - don't package API documentation into main lib package (#310143) ------------------------------------------------------------------- Tue Aug 7 20:43:01 CEST 2007 - maw@suse.de - Use %fdupes - Split off a -lang subpackage - s#%run_ldconfig#/sbin/ldconfig/ in %post and %postun. ------------------------------------------------------------------- Mon Jul 30 08:47:46 CEST 2007 - meissner@suse.de - upgraded to 2.4.0 final - only small fixes and some new USB ids ------------------------------------------------------------------- Fri Jun 22 16:38:14 CEST 2007 - meissner@suse.de - upgraded to current trunk svn - new driver ids - PTP2 EOS 400D support enhancements - fixed a max packetsize problem ------------------------------------------------------------------- Mon Jun 11 15:41:48 CEST 2007 - meissner@suse.de - upgraded to current trunk svn - various cleanups - Canon EOS 400D capture support started. - make check now in %check, postun runs ldconfig ------------------------------------------------------------------- Thu May 17 15:39:11 CEST 2007 - meissner@suse.de - upstream 2.3.1.4.trunk: - lots of bugfixes coming from Coverity - bugfixes - new USB ids - adjusted requirements to libusb-devel ------------------------------------------------------------------- Tue Feb 27 23:03:43 CET 2007 - dmueller@suse.de - adjust BuildRequires: libexif -> libexif-devel ------------------------------------------------------------------- Wed Feb 21 10:44:27 CET 2007 - meissner@suse.de - Upgraded to current upstream SVN. - lots of new ids - several bugfixes - Disabled mDNSresponder stuff. Breaks for too much people without large benefit (only 1 or 2 existing cameras can use it). ------------------------------------------------------------------- Sat Jan 13 14:43:22 CET 2007 - meissner@suse.de - use upstream current SVN with last patch included - run make check ------------------------------------------------------------------- Fri Jan 12 20:39:17 CET 2007 - dmueller@suse.de - fix pedantic header compile ------------------------------------------------------------------- Mon Jan 8 20:32:45 CET 2007 - meissner@suse.de - fixed libdir problem. ------------------------------------------------------------------- Mon Jan 8 16:40:31 CET 2007 - meissner@suse.de - upgraded to 2.3.1.3.trunk. - large parts of PTP2 driver rewritten. - possibility to download data without need to keep it in memory. ------------------------------------------------------------------- Tue Dec 5 15:05:26 CET 2006 - meissner@suse.de - upgraded to 2.3.0 final. - some new ids - bugfixes ------------------------------------------------------------------- Tue Nov 14 22:31:04 CET 2006 - meissner@suse.de - Some new ids added. - fixed broken canon driver (GP_LOG does not exist). - Fixed && -> & ------------------------------------------------------------------- Thu Nov 9 11:10:34 CET 2006 - meissner@suse.de - updated to current SVN: - lots of new PTP USB ids - small bugfixes ------------------------------------------------------------------- Mon Oct 30 18:08:45 CET 2006 - meissner@suse.de - include doxygen documentation - use correct types for portable_audio_player so we get ACLs from hal-resmgr. ------------------------------------------------------------------- Fri Oct 27 16:54:22 CEST 2006 - meissner@suse.de - split into libgphoto2 and libgphoto2-devel - updated to current TRUNK - some bugfixes (strncat) - some new USB ids. ------------------------------------------------------------------- Fri Oct 27 14:59:35 CEST 2006 - ro@suse.de - provide libgphoto2-devel until/unless package is split ------------------------------------------------------------------- Tue Oct 17 13:41:33 CEST 2006 - meissner@suse.de - upgraded to current trunk. - MTP playlist support. - More MTP fixes. - Lots of new ids. - Fast CANON directory retrieval. ------------------------------------------------------------------- Tue Sep 5 16:37:00 CEST 2006 - meissner@suse.de - dbus_connection_disconnect() -> dbus_connection_close() ------------------------------------------------------------------- Tue Aug 29 14:22:41 CEST 2006 - meissner@suse.de - more bugfixes from trunk and split off C# bindings package. ------------------------------------------------------------------- Mon Aug 28 16:51:04 CEST 2006 - meissner@suse.de - upgraded to current trunk version. - MTP fixes, including handling of Umlauts - New device ids - C# binding fixes - removed upstreamed patches. ------------------------------------------------------------------- Tue Aug 1 02:07:44 CEST 2006 - dmueller@suse.de - add compiler warning fix for installed headers ------------------------------------------------------------------- Mon Jun 19 13:27:03 CEST 2006 - meissner@suse.de - Upgraded to 2.2.0 release. - More new USB ids. - Lots of MTP fixes. - wait_for_event handling. - metadata handling for MTP. ------------------------------------------------------------------- Wed Apr 26 11:25:56 CEST 2006 - meissner@suse.de - Readd names and "libgphoto2 support" tag for the MTP devices. - Mark the devices as "user" to get correct resmgr support. (both reported by thoenig) ------------------------------------------------------------------- Sat Apr 22 17:45:50 CEST 2006 - meissner@suse.de - Added 4 new PTP ids. ------------------------------------------------------------------- Wed Apr 5 14:44:09 CEST 2006 - meissner@suse.de - Report MTP Music Players correctly via FDI (hackish solution) #163015 - Some more new PTP ids. ------------------------------------------------------------------- Mon Mar 27 13:22:34 CEST 2006 - meissner@suse.de - Merged some important fixes from CVS. - libgphoto2-map-mp3.patch: Map MP3 mimetypes correctly to PTP ObjectFormat codes. - libgphoto2-mtp-fixes.patch: Fixed some read/write problems on PTP compatible music complayers. - libgphoto2-new-usbids.patch: New USB IDs collected over the last few weeks. ------------------------------------------------------------------- Wed Feb 22 15:39:40 CET 2006 - stbinner@suse.de - don't require hal on 9.2 supplementary distributions ------------------------------------------------------------------- Fri Jan 27 02:05:57 CET 2006 - mls@suse.de - converted neededforbuild to BuildRequires ------------------------------------------------------------------- Wed Jan 25 11:15:49 CET 2006 - meissner@suse.de - Ignore Olympus cameras with Sierra firmware, since they also appear as storage devices. - Prepare for adding "camera" to "info.capabilities". - Some bugfixes. ------------------------------------------------------------------- Mon Jan 23 10:53:45 CET 2006 - meissner@suse.de - Upgraded to current CVS. - More PTP / MTP bugfixes. ------------------------------------------------------------------- Mon Jan 16 11:44:11 CET 2006 - meissner@suse.de - Upgraded to current CVS. - Lots of MTP / PTP fixes. - PTP configuration handling rewrite - use -fstack-protector only in SL > 10.0 ------------------------------------------------------------------- Thu Jan 12 18:39:05 CET 2006 - meissner@suse.de - Upgraded to current CVS. - Lots of MTP and iRiver related fixes. ------------------------------------------------------------------- Tue Jan 10 23:17:06 CET 2006 - meissner@suse.de - Upgraded to 2.1.99 - Upgraded to current CVS. - Various new ids. - Various bugfixes in ptp driver. - translation updates. ------------------------------------------------------------------- Fri Dec 16 16:12:11 CET 2005 - meissner@suse.de - Upgraded to current CVS. (Some new ids, Ricoh R3 fixes). - Fixed build in PLUS. ------------------------------------------------------------------- Mon Nov 28 17:48:59 CET 2005 - meissner@suse.de - Upgraded to current CVS (almost only new model ids). - Dropped last patch, I made fixes for this upstream, but parts of the problem are actually on the gnome-volume-manager side. The fdi file in this package only contains non-usb-storage accessible cameras. ------------------------------------------------------------------- Fri Nov 11 19:00:11 CET 2005 - fejj@suse.de - Revert fdi file fixes since they actually break them worse than before ------------------------------------------------------------------- Mon Oct 10 17:22:01 CEST 2005 - meissner@suse.de - Newest CVS snapshot: - Changed HAL fdi file according to upstream suggestion. ------------------------------------------------------------------- Tue Sep 27 15:56:17 CEST 2005 - meissner@suse.de - Upgraded to latest CVS snapshot. - reduce memory footprint when downloading images - new ids ------------------------------------------------------------------- Sat Aug 20 15:30:40 CEST 2005 - schwab@suse.de - Don't require hotplug. ------------------------------------------------------------------- Thu Aug 18 09:16:21 CEST 2005 - meissner@suse.de - removed /etc/hotplug/usb/usbcam.usermap use. #105276 ------------------------------------------------------------------- Wed Aug 17 14:44:20 CEST 2005 - meissner@suse.de - Merged to current CVS. - New "disk:" support to support mass storage cameras (written by Marcus M.), changes in libgphoto2_port/disk/disk.c, libgphoto2/ gphoto2-abilities-list.c and camlibs/directory/directory.c. Tested and working with gphoto2, f-spot, digikam, and KDE camera:/ - usb - suppress some unnecessary "usb:XXX,YYY" ports. - escape & in HAL FDI maps. - Some small bugfixes and new ids. ------------------------------------------------------------------- Fri Aug 12 15:10:02 CEST 2005 - meissner@suse.de - Upgraded to current CVS. - Some new ids - Some bugfixes for PTP. - FDI patch is obsolete. ------------------------------------------------------------------- Tue Aug 9 10:24:20 CEST 2005 - meissner@suse.de - Supply the libgphoto2 camera name in the FDI script. ------------------------------------------------------------------- Tue Jul 19 13:17:05 CEST 2005 - meissner@suse.de - gphoto-desktopdev is no longer used at all, all done via hal-resmgr. - Generate usbmap and fdimap on the fly during build, no longer shipped seperately. - Create FDI map XML file and install into freedesktop FDI space. ------------------------------------------------------------------- Mon Jul 11 10:16:39 CEST 2005 - meissner@suse.de - Upgraded to latest development snapshot. - buildsystem changes, now generates slightly different shared drivers - disk backend with hal support - PTP driver enhancements, especially for Nikon D70 - new HP Photosmart 215 driver ------------------------------------------------------------------- Mon Jun 27 11:10:39 CEST 2005 - meissner@suse.de - upgraded to 2.1.6. - added 3 more cameras, some final fixes. ------------------------------------------------------------------- Fri Jun 10 12:09:01 CEST 2005 - meissner@suse.de - Upgraded to 2.1.6rc2. - 2.6.12 kernel fixes - libusb 0.10 fixes - various new cameras and features. ------------------------------------------------------------------- Mon Mar 21 16:33:51 CET 2005 - meissner@suse.de - Added Sea & Sea 5000G, reported missing by Gerald. ------------------------------------------------------------------- Tue Mar 1 15:11:53 CET 2005 - meissner@suse.de - get rid of slashes in camera names. ------------------------------------------------------------------- Tue Feb 22 10:47:27 CET 2005 - meissner@suse.de - last change (etc/dev.d/usb) is not necessary. ------------------------------------------------------------------- Fri Feb 18 17:20:05 CET 2005 - meissner@suse.de - fixed directory lists. ------------------------------------------------------------------- Fri Feb 18 14:20:47 CET 2005 - meissner@suse.de - Upgraded to current CVS. - Nikon and Pentax Sierra mode support. - bugfixes and some new models for existing drivers. - Move gphoto-desktop dev also to /etc/dev.d/usb/, since hotplug is no longer used, but udev is. ------------------------------------------------------------------- Fri Feb 4 15:49:00 CET 2005 - meissner@suse.de - Upgraded to current 2.1.6 development branch version. ------------------------------------------------------------------- Thu Dec 16 10:09:28 CET 2004 - meissner@suse.de - Upgraded to 2.1.5 release. ------------------------------------------------------------------- Tue Nov 30 17:11:10 CET 2004 - meissner@suse.de - Upgraded to 2.1.5rc1. ------------------------------------------------------------------- Tue Oct 19 11:41:50 CEST 2004 - meissner@suse.de - Upgraded to current CVS head versions. - no -> nb renamed. - Added starts of PTP configuration magic. ------------------------------------------------------------------- Fri Sep 17 17:11:29 CEST 2004 - meissner@suse.de - Some new ids of new cameras extracted from HEAD branch. ------------------------------------------------------------------- Mon Sep 6 10:32:51 CEST 2004 - meissner@suse.de - Upgraded to current CVS. - PTP config handling improved. - More cameras. ------------------------------------------------------------------- Tue Aug 31 13:14:21 CEST 2004 - meissner@suse.de - Upgrade to current CVS. - detach kernel drivers for stv680 and spca50x if used. - PTP property handling. - sq905 fixes. ------------------------------------------------------------------- Thu Aug 19 13:58:07 CEST 2004 - meissner@suse.de - Updated to current HEAD development branch. - lots of new PTP ids - handling of multiple USB cameras at once. - lots of fixes in other drivers. - new drivers for newer small cameras. ------------------------------------------------------------------- Mon Apr 19 14:19:03 CEST 2004 - meissner@suse.de - %jobs, fixed syntax aliasing problems. ------------------------------------------------------------------- Wed Apr 7 10:36:31 CEST 2004 - meissner@suse.de - removed hotplug from neededforbuild. ------------------------------------------------------------------- Tue Apr 6 07:51:55 CEST 2004 - adrian@suse.de - hardcode camera hotplug file name (partly workarounds #37902) ------------------------------------------------------------------- Mon Mar 22 11:06:31 CET 2004 - meissner@suse.de - updated from branch: - canon: 2 critical bugfixes, 1 new id. - ptp2: better working capture code, new ids. - agfa cl20: heaps of fixes - misc: new camera ids for several drivers. - updated usbcam.usermap accordingly. ------------------------------------------------------------------- Thu Mar 18 17:51:38 CET 2004 - adrian@suse.de - create icon and register device in resmgr via hotplug ------------------------------------------------------------------- Mon Jan 19 15:46:16 CET 2004 - meissner@suse.de - Upgraded to final 2.1.4 version. ------------------------------------------------------------------- Wed Jan 7 15:19:54 CET 2004 - meissner@suse.de - Upgraded to current CVS (head4): - multiple cameras of same type at once support. - several new camera ids, lots of bug fixes. ------------------------------------------------------------------- Fri Nov 21 13:25:24 CET 2003 - meissner@suse.de - upgraded to current CVS head with all the Ricoh G3 fixes. ------------------------------------------------------------------- Wed Oct 15 16:00:25 CEST 2003 - meissner@suse.de - do not build as root. ------------------------------------------------------------------- Mon Oct 13 11:31:42 CEST 2003 - meissner@suse.de - Upgraded to current development snapshot. ------------------------------------------------------------------- Wed Sep 17 13:36:01 CEST 2003 - meissner@suse.de - sierra driver: Do not stop a never started progress context. - ptp2 driver: Increase timeout for capture #30946 ------------------------------------------------------------------- Mon Sep 15 10:21:30 CEST 2003 - meissner@suse.de - added diff with bugfixes and new camera ids from current cvs. - Fixes and new ids in PTP2 driver - Fixes and new ids in Canon driver - Make pdc640 driver recognize cameras at all. - Fixes for soundvision driver, new camera model. ------------------------------------------------------------------- Sun Aug 10 22:38:32 CEST 2003 - meissner@suse.de - Updated to 2.1.2 release. ------------------------------------------------------------------- Mon Jun 16 12:56:12 CEST 2003 - meissner@suse.de - updated to 2.1.2 rc3 level (called dev11). ------------------------------------------------------------------- Thu Jun 12 20:26:17 CEST 2003 - meissner@suse.de - fixed build, added %find_lang usage. ------------------------------------------------------------------- Thu Jun 12 10:05:31 CEST 2003 - meissner@suse.de - added hotplug to neededforbuild due to missing directories. - added missing dir %_libdir/libgphoto2. ------------------------------------------------------------------- Tue May 13 16:39:19 CEST 2003 - meissner@suse.de - %_lib fix. ------------------------------------------------------------------- Tue May 13 15:12:15 CEST 2003 - meissner@suse.de - Upgraded to 2.1.2dev8 (current CVS): - new ptp2 driver - agfa cl20 driver - spca50x drivers merged into one - lots of bugs fixed. - fixed filelist (added manpages). ------------------------------------------------------------------- Mon Feb 17 17:05:44 CET 2003 - meissner@suse.de - Drop our own usbcam hotplug script and use desktopdev from resmgr instead. ------------------------------------------------------------------- Mon Feb 17 15:20:34 CET 2003 - meissner@suse.de - Upgraded to current CVS: bugfixes, pdc640 driver fixed again. - Fixed serial device open if resmgr is not running. - Updated usbids. ------------------------------------------------------------------- Thu Feb 6 15:13:27 CET 2003 - meissner@suse.de - Upgraded to current CVS. - Fixed support for Typhoon Stylocam, some more stuff in pdc640 driver. - Fixed usbcam script now for real. ------------------------------------------------------------------- Sat Jan 25 12:08:04 CET 2003 - meissner@suse.de - Upgraded to current CVS. - New gcam300, pccam300, benq driver. - Fixes in others. - Fixed usermap, and usbcam script. ------------------------------------------------------------------- Thu Jan 9 10:47:46 CET 2003 - meissner@suse.de - Upgraded to current CVS version. - New stv0674 camera driver. - Fixes in sierra, ptp, casio, largan camlibs. - More ids in others. - resmgr style locking for serial devices. ------------------------------------------------------------------- Mon Dec 2 15:53:45 CET 2002 - meissner@suse.de - Final 2.1.1, translations complete, refreshed usbmap. ------------------------------------------------------------------- Wed Nov 20 09:41:57 CET 2002 - meissner@suse.de - neededforbuild += resmgr ------------------------------------------------------------------- Mon Nov 18 15:39:02 CET 2002 - meissner@suse.de - Updated to RC1 of libgphoto 2.1.1. - spca504_flash camlib. - More PTP camera models, some PTP endianess problems fixed. - Fixed some 64bit bigendian and type punning problems with gcc 3.3. - Use new resmgr in usermap script if present. ------------------------------------------------------------------- Thu Oct 31 05:52:43 PST 2002 - meissner@suse.de - Updated to latest upstream: - SiPix Stylecam Blink driver added. - More models for other cameras. - Bugfixes. ------------------------------------------------------------------- Thu Sep 26 06:12:12 PDT 2002 - meissner@suse.de - Updated to latest upstream: - More Canon Models. - New Drivers: Kodak DC210, Largan lMini, pccam600, Mustek GSmart, SX330Z. ------------------------------------------------------------------- Fri Aug 23 14:15:32 CEST 2002 - meissner@suse.de - Do not cat into system files, use seperate files for USB usermaps. ------------------------------------------------------------------- Tue Aug 20 10:50:11 CEST 2002 - meissner@suse.de - added prereq: hotplug /bin/cat ------------------------------------------------------------------- Wed Jul 31 09:07:29 CEST 2002 - meissner@suse.de - dropped provides: gphoto ------------------------------------------------------------------- Mon Jul 29 11:49:50 CEST 2002 - meissner@suse.de - splitted up from gphoto.
Locations
Projects
Search
Status Monitor
Help
OpenBuildService.org
Documentation
API Documentation
Code of Conduct
Contact
Support
@OBShq
Terms
openSUSE Build Service is sponsored by
The Open Build Service is an
openSUSE project
.
Sign Up
Log In
Places
Places
All Projects
Status Monitor
