Sign Up
Log In
Log In
or
Sign Up
Places
All Projects
Status Monitor
Collapse sidebar
home:bmwiedemann:reproducible:distribution:ring1
nfs-utils
sysconfig.nfs
Overview
Repositories
Revisions
Requests
Users
Attributes
Meta
File sysconfig.nfs of Package nfs-utils
## Path: Network/File systems/NFS server ## Description: number of threads for kernel nfs server ## Type: integer ## Default: 4 ## ServiceRestart: nfs-server # # the kernel nfs-server supports multiple server threads # USE_KERNEL_NFSD_NUMBER="4" ## Path: Network/File systems/NFS server ## Description: use fixed port number for mountd ## Type: integer ## Default: "" ## ServiceRestart: nfs-mountd # # Only set this if you want to start mountd on a fixed # port instead of the port assigned by rpc. Only for use # to export nfs-filesystems through firewalls. # MOUNTD_PORT="" ## Path: Network/File systems/NFS server ## Description: NFSv3 server support ## Type: yesno ## Default: yes ## ServiceRestart: nfs-server # # Enable NFSv3 server support (yes/no) # This causes the NFS server to respond to # NFSv2 and NFSv3 requests. Only disable this # if you want to ensure only NFSv4 is used. # NFS3_SERVER_SUPPORT="yes" ## Path: Network/File systems/NFS server ## Description: NFSv4 protocol support ## Type: yesno ## Default: yes ## ServiceRestart: nfs-server # # Enable NFSv4 support (server and/or client) (yes/no) # NFS4_SUPPORT="yes" ## Path: Network/File systems/NFS server ## Description: Network Status Monitor options ## Type: string ## Default: "" # # If a fixed port should be used to send reboot notification # messages to other systems, that port should be given # here as "-p portnumber". # SM_NOTIFY_OPTIONS="" ## Path: Network/File systems/NFS server ## Description: Port rpc.statd should listen on ## Type: integer ## Default: "" ## ServiceRestart: rpc-statd # # Statd will normally choose a random port to listen on and # SuSE-Firewall is able to detect which port and allow for it. # If you have another firewall, you may want to set a fixed # port number which can then be opened in that firewall. STATD_PORT="" ## Path: Network/File systems/NFS server ## Description: Hostname used by rpc.statd ## Type: string ## Default: "" ## ServiceRestart: rpc-statd # # statd will normally use the system hostname in status # monitoring conversations with other hosts. If a different # host name should be used, as can be useful with fail-over # configurations, that name should be given here. # STATD_HOSTNAME="" ## Path: Network/File systems/NFS server ## Description: TCP Port that lockd should listen on ## Type: integer ## Default: "" ## ServiceRestart: nfs-server # # Lockd will normally choose a random port to listen on and # SuSE-Firewall is able to detect which port and allow for it. # If you have another firewall, you may want to set a fixed # port number which can then be opened in that firewall. # lockd opens a UDP and a TCP port. This setting only affect # the TCP port. LOCKD_TCPPORT="" ## Path: Network/File systems/NFS server ## Description: UDP Port that lockd should listen on ## Type: integer ## Default: "" ## ServiceRestart: nfs-server # # Lockd will normally choose a random port to listen on and # SuSE-Firewall is able to detect which port and allow for it. # If you have another firewall, you may want to set a fixed # port number which can then be opened in that firewall. # lockd opens a UDP and a TCP port. This setting only affect # the UDP port. LOCKD_UDPPORT="" ## Path: Network/File systems/NFS server ## Description: Command line parameters for rpc.statd ## Type: string ## Default: "" ## ServiceRestart: rpc-statd # # Custom parameters for rpc.statd daemon. Typically this will # be used to set the port number (-p). # STATD_OPTIONS="" ## Path: Network/File systems/NFS server ## Description: Lease time for NFSv4 leases ## Type: integer ## Default: "90" # # Set the lease time for the NFSv4 server. When a client # crashes or is separated from the server by a network problem, # this indicates how long the server will continue to honor # locks it held and when it will allow other clients to take # conflicting locks. A shorter time means network problems are # more likely to hurt filesystem functionality, but genuine # client crash are detected more quickly. # The NFSV4GRACETIME setting must be not less than the lease # time, so another benefit of short lease times is that server # reboots will disrupt filesystem traffic for a shorter period # of time. # This choice is primarily a trade-off between surviving # transient network problems, and expediting completion of # server reboot or fail-over. # The default is 90 second. A practical minimum is about 15 # seconds. # NFSV4LEASETIME="90" ## Path: Network/File systems/NFS server ## Description: Grace time for NFSv4 server restart ## Type: integer ## Default: "90" # # Set the NFSv4 server grace time. When the server restarts it # waits this long for pre-existing clients to re-establish any # locks that they held before the restart. During this time # new locks cannot be granted and new file opens cannot be # allowed. # A shorter time allows fast restart or fail-over completion, # but requires the NFSV4LEASETIME to be shorter which may # increase the impact of temporary network problems. # The default is 90 seconds. The value must not be less than # NFSV4LEASETIME. # When NFSv4.1 or later is in use, and when all clients report # when they finish reclaiming locks, the grace time can finish # early and so a large value has little cost. The # NFSV4LEASETIME is then most significant in managing restart # timing. # NFSV4GRACETIME="90" ## Path: Network/File systems/NFS server ## Description: Alternate mount point for rpc_pipefs filesystem ## Type: string ## Default: "" ## ServiceRestart: nfs-utils # # In a high-availabilty configuration it is possible that /var/lib/nfs # is redirected so some shared storage and so it is not convenient to # mount the rpc_pipefs filesystem at /var/lib/nfs/rpc_pipefs. In that # case an alternate mount point can be given here. RPC_PIPEFS_DIR="" ## Path: Network/File systems/NFS server ## Description: Options for svcgssd ## Type: string ## Default: "" ## ServiceRestart: rpc-svcgssd # # Normally svcgssd does not require any option. However in a # high-availabilty configuration it can be useful to pass "-n" # to guide the choice of default credential. To allow for that # case or any other requiring options ot svcgssd, they can # be specified here. SVCGSSD_OPTIONS="" ## Path: Network/File systems/NFS server ## Description: Extra options for nfsd ## Type: string ## Default: "" ## ServiceRestart nfs-server # # This setting allows extra options to be specified for NFSD, such as # -H <shared_hostname> in a high-availability configuration. NFSD_OPTIONS="" ## Path: Network/File systems/NFS server ## Description: Extra options for gssd ## Type: string ## Default: "" ## ServiceRestart: rpc-gssd # # Normally gssd does not require any options. In some circumstances, # -n, -l or other options might be useful. See "man 8 rpc.gssd" for # details. Those options can be set here. GSSD_OPTIONS="" ## Path: Network/File systems/NFS server ## Description: Extra options for mountd ## Type: string ## Default: "" ## ServiceRestart nfs-mountd # # Normally mountd does not require any options. In some circumstances, # -n, -t, -g or other options might be useful. See "man 8 rpc.mountd" for # details. Those options can be set here. # -p or -N should be set using MOUNTD_PORT or NFS4_SUPPORT rather than # this option. MOUNTD_OPTIONS="" ## Path: Network/File systems/NFS server ## Description: Avoid DNS lookups for kerberos principal ## Type: yesno ## Default: no ## ServiceRestart: rpc-gssd # # Avoid DNS lookups when determining kerberos identity # of NFS server (yes/no) # "yes" is safest, but "no" might be needed to preserve # correct behaviour at sites that don't use # Fully Qualified Domain Names when mounting NFS Shares. # NFS_GSSD_AVOID_DNS="no" ## Path: Network/File systems/NFS server ## Description: Set v4.1+ scope reported by server ## Type: string ## Default: "" ## ServiceRestart: nfs-server # # Set the scope reported by the NFS server. When nothing # is given the kernel uses the configured hostname as # a default. When NFS is used in a fail-over configuration # it is important that all hosts which server the same resource # report the same scope. # NFSD_SCOPE=""
Locations
Projects
Search
Status Monitor
Help
OpenBuildService.org
Documentation
API Documentation
Code of Conduct
Contact
Support
@OBShq
Terms
openSUSE Build Service is sponsored by
The Open Build Service is an
openSUSE project
.
Sign Up
Log In
Places
Places
All Projects
Status Monitor