Sign Up
Log In
Log In
or
Sign Up
Places
All Projects
Status Monitor
Collapse sidebar
home:braunseb:proaudio
ladspa-caps
ladspa-caps.changes
Overview
Repositories
Revisions
Requests
Users
Attributes
Meta
File ladspa-caps.changes of Package ladspa-caps
------------------------------------------------------------------- Thu Feb 29 13:00:05 UTC 2024 - pgajdos@suse.com - Use %autosetup macro. Allows to eliminate the usage of deprecated %patchN ------------------------------------------------------------------- Sun Nov 3 07:36:25 UTC 2019 - Luigi Baldoni <aloisio@gmx.com> - Update to version 0.9.26: * documentation updates * DDDelay removed, needs more work version 0.9.25: * potential gcc overoptimisation resulting in NaN in Kaiser window setup eliminated (fix contributed by Jean Pierre Cimalando) * updated to reflect changes to the div() and pow10f() functions in libc * tonestack coefficient update reverted to original Yeh implementation * Compress default measurement mode switched to RMS, attack range doubled * Compress power and gain filter cutoff lowered to lessen intermodulation distortion * Plate defaults changed * volume control added to Spice hi and lo circuits, max gain reduced on both * Wider output channels swapped * AutoFilter rate lowered * Scape parameters cleaned up and remapped, tune control removed * Noisegate hysteresis increased to 180 ms * dc-30 tonestack R3 20k -> 10k * Eq10 Q changed to render optimally flat response at all zero band gain settings * div port added to Click * new plugin DDDelay version 0.9.24: * documentation updates including switch to 48k for all spectra * "twin" and "stanford" tonestack models swap places * ChorusI feedback changed to interpolation, softens zipper noise on t changes * use vestigial FPTruncateMode only on pre-SSE2 hardware * 4x128 oversampling option removed from Compress plugins * state port displaying current gain reduction on Compress plugins * _latency port for parallel Eq * Saturate fade-in bug eliminated * Noisegate hysteresis interval lengthened * Click sounds "stick" brightened and "beep" shortened * run_adding() removed, reducing binary size by 30 % and compile time similarly * JVRev tail modified, low-passed * all ports reordered to consistent ctrl i/o audio i/o order * Eq4p crossfade reimplemented as equal-power squared cosine, smoother now * EqFA4p added * non-SSE v4f_shuffle surrogate fixed (fixes Eq4p on ARM, reported by Jens Dreske) * dropped 44.1 kHz ToneStackLT * OnePole header renamed IIR1, filters renamed LP1 and HP1 * BiQuad header and filter renamed IIR2, SIMD *4f filters renamed *v4 * CabinetIII (less demanding loudspeaker emulation resurrected again) * ChorusI port ranges and defaults adjusted * Compress parameter mappings and defaults adjusted version 0.9.23: * ChorusI hp filter denormal protection added version 0.9.22: * ChorusI blend behaviour changed * ChorusI parameters adjusted * ChorusI hp filter before delay added * AutoFilter parameters adjusted * AutoFilter 'range' port becomes 'depth' version 0.9.21: * Eq10 Q increased * AmpVTS bright/compression/gain mappings adjusted * AutoFilter reverted to 0.9.1 version with adjusted parameters version 0.9.20: * ToneStack ports rearranged (following "control before audio" convention) * ToneStack LT model selection fixed version 0.9.19: * Noisegate partially rewritten, defaults adjusted * Noisegate bug causing spurious gain fluctuations in closed state eliminated * AmpVTS compression controls adjusted * influence of total gain on compression in AmpVTS reduced * documentation polish version 0.9.18: * restored ToneStack presets to present the full list * AmpVTS 'bright' filter given slight resonance * AmpVTS compression control range widened version 0.9.17: * multiple inclusion header guards changed to comply with ISO/IEC 9899:2011 (at the insistence of Markus Elfring) * PlateX2 fixed to read correct port for damping parameter (reported by James Morris) * uninstall removes rdf * DSP::FIR4f::set_kernel size overflow in default parameter fixed (reported and isolated by Ricardo Crudo) * AmpVTS "lowcut" filter changed from 2- to 1-pole * "HK 20" tonestack renamed to "AK 20" * AmpVTS lowcut mapping changed, default lowered * AmpVTS highpass 1 cutoff raised * lowpass filter added to Noisegate's opening peak detector * Noisegate not NoiseGate * Click normal addition limited to idle loop * NoiseGate logic loop bug fixed, hysteresis added * documentation polish version 0.9.16: * NoiseGate simplified, sped up, gain lowpassed, click bug eliminated * Sin smoothened, defaults updated * PhaserII defaults updated * Fractal defaults updated * documentation polish version 0.9.15: * no-vector-arithmetic compilation fixed version 0.9.14: * AutoFilter x/y parameter eliminated * Fractal hp changed to be configurable, attractors recalibrated * DSP::Lorenz instantly initialises to useful state * documentation polish version 0.9.13: * Eq4p softens drastic parameter changes by crossfading static filters * Eq4p employing single v4f filter, slightly quicker * Eq4p 'off' filter mode * documentation and interface polish version 0.9.12: * non-SSE compilation fixed version 0.9.11: * DSP::Roessler instantly initialises to useful state * Logarithmic port bounds and values fixed to reflect actual intent, affecting Spice, AutoFilter and ChorusI * clicking automatic gain fade on activate() eliminated in Saturate * Dirac merged into Click * Lorenz and Roessler merged into Fractal * JVRev removed * running plugins for zero frames returns without touching state * CabinetII and III removed * PhaserII sine LFO and LFO choice port added * PhaserII fractal modulation extensively revised * ChorusI rate lower bound slightly increased * ChorusI delay line length adjusted to accommodate full t+width range * all Chorus and Phaser plugins removed save for ChorusI and PhaserII * major documentation revision * Eq4p parametric equaliser plugin * RBJ shelving filter prototype implementation fixed * "2x2" stereo plugin label postfix changed to "X2" * Eq renamed Eq10 * SIMD implementation updates * DSP::RBJ coefficient calculation rearranged * Click bpm range changed, default lowered substantially version 0.9.10: * DSP::RMS protected against negative sum of squares * documentation updates version 0.9.8: * Spice enabled by default, Spice2x2 added * AmpVTS default oversampling ratio changed to 4x * JVRev refinements * Cabinet gain upper limit reinstated to 24 dB * AutoFilter modulation slightly adjusted * more *ChorusII modulation smoothness * 1st-order IIR lp set_f fix part 2 * 1st-order IIR lp set_f fix part 1 * 1st order low-pass for AutoFilter modulation LFO * DelayTapA removed * README updated * Click 'stick' sound brightened * moved processor_specific_denormal_measures() to activate(), speedup version 0.9.7: * ChorusI is back * AutoFilter modulation range and default parameter updates version 0.9.6: * Click fixed to compile by older g++ versions version 0.9.5: * AmpVTS model port moved, renamed to the more apt 'tonestack' * documentation refinements * appreciable AmpVTS speedup by going back to sample_t for accumulator * NoiseRatio attack time control * sample rate dependencies in NoiseGate removed, time constants revised * Tonestacks reordered * Plugin::over_fs * AmpVTS model setting fixed to follow the correct input * CabinetIII resurrected * AmpVTS 'ratio' port renamed to 'over' * more filters for AutoFilter, ladder stage gain control * AutoFilter oversampling * AmpVTS bias in poweramp, dcblock before output * AutoFilter envelope calculation fixed for fs > 153.6 kHz * peak/rms selection for Compress * AmpVTS tuning version 0.9.4: * AmpVTS bright mapping revised * Compress hi-pass removed * Compress saturation changed from tanh to atan * beep wave for Click * selectable oversampling ratio for Compress in saturating mode * fixed Compress to apply gain before saturation * replaced sample_func_t with the more apt yield_func_t * minor cosmetics * caps-doc is a separate package * selectable wave for Click, parfiltmodel added * further smoothened ChorusII modulation * selectable oversampling ratio for Amp * moved some compress setup calls from Amp's run() to activate() * rdf target prerequisite for dist * Eq Q fixed, flat response at 0 gain version 0.9.3: * Smoother modulation for ChorusII * AmpVTS filters retuned * correction for ToneStack gain in AmpVTS * ToneStack models reordered, 'wookie', 'porky', 'HK 20', 'nihon ace' models added * Amp 'bias' now a filtered function of output power, control removed * division operation in 1st-order hipass setup replaced by multiplication * Saturate gain = 0 dB in 'bypass' mode * Saturate 'rectify' mode * AmpVTS, Plate control mapping adjusted version 0.9.2: * included dsp/polynomials.cc in the tarball version 0.9.1: * Lorenz/Roessler rate linked to fs * AutoFilter replaces SweepVFI * CabinetIV * fixed erroneous float promotion of upsampler z padding parameter * lots of parameter tuning * many cleanuppies here and there * SweepVFI/AutoFilter saturating SVFII ladder (instead of oversampled SVFI) * UniqueIDs moved into interface.cc * SweepVFI modulation comes as range + x/z now * GPL v3 * more Phaser notches * LR filters for Spice * Saturate inverse gain for approximately constant loudness * Scape extensively reworked * further refinements to Chorus and Phaser units for smoother modulation * SweepVFII removed * LADSPA_PORT_GROUP * Compress* input gain removed * ToneStackLT rolled into ToneStack and eliminated * fixed w miscalculation in DSP::Sine::set_f with fs given * AmpPlus/AmpVTS total rewrite * TubeCompress merged into Compress, for great template goodness * *Chorus* modulation rate decoupled from samplerate * tanh approximation, available in the Saturate plugin * *Chorus* units reworked for smoother modulation and sound * StereoChorusII2x2 plugin * JVRev bandwidth filter/control added * VCO* removed * HRTF removed * ChorusI, StereoChorusI, PhaserI removed * CabinetI removed * No more AmpStub silliness * All Amp and Preamp plugins removed, save for AmpVTS * Incite rechristened Spice * JVRev blend range normalised to [0..1] * Plate input value ranges adjusted to uniform [0..1] * Phaser* spread value range upper bound adjusted to 1 from pi multiples version 0.9.0: * White bleached (was slightly pinkish before) * up+down oversampling functionality rolled into one class * Incite plugin * total redesign of the Clip plugin, renamed to Saturate * NoiseGate plugin * RBJ prototypes changed to accept biquad instead of coeff. arrays * various default value changes * all FIRs changed to use templated kernel size, appreciable speedup for all oversampled plugins * reduced the number of arithmetic operations in the tonestack coefficient update function, speedup for ToneStack and AmpVTS * TubeCompress2x2 plugin * TubeCompress plugin * no more borrowed kernels! * CabinetII gain adjusted for Mesa and Pro Jr models (much lower now and more in line with the other models) * Amp final drive gain reduced slightly to prevent foldover distortion * SweepVF fractal rate control mapping adjusted * Pan completely redesigned with Orban-like stereo image synthesis * Narrower mode switch and mid/side operation added * Plate parameter ranges modified for a brighter and less reverberant default sound * VCOd sync option had to be dropped due to compiler incompatibility * Lorenz, Roessler fitted with a dc-blocking filter * all int sample loop variables changed to unsigned, slightest speedup * Compress2x2 plugin * Compress plugin replaced with a completely new design * Phaser feedback port ranges sanitised * StereoPhaser plugins * PhaserII gain reduced by 6dB * "latency" outputs of all plugins removed * Descriptor array handling changed to disable individual plugins with relative ease * fixed instances of g++ -O3 and above compiled code segfaulting, performance gained everywhere * documentation reworked extensively * CEO wave is resampled at runtime from fs = 8kHz source * CEO mantra changed (now an flite recording) * Click changed to use modal synthesis to generate the click wavetable, for improved sound and independency of sample rate * Plate changed to do delay summation using doubles * 1st and 2nd order filters changed to use templated types for coefficient and state storage * 1st order input hipass added to AmpVTS plugin * filter 'mode' port added to AutoWah, and renamed to AutoFilter * fixed improper 'model' labels meant to be 'mode' in the rdf generator version 0.4.5: * Narrower plugin added * fixed 'configure.py' to work with python3 * fixed Sin, Roessler and Lorenz gain smoothing on activation - Dropped caps-fix-double-free.diff (no longer applicable) - Refreshed reproducible.patch - Spec cleanup ------------------------------------------------------------------- Mon May 22 03:55:14 UTC 2017 - bwiedemann@suse.com - Add reproducible.patch to sort input files to make build more reproducible ------------------------------------------------------------------- Mon Mar 3 13:31:17 CET 2014 - tiwai@suse.de - Remove obsoleted autoreq/autoprov tags ------------------------------------------------------------------- Sat Mar 1 21:38:50 UTC 2014 - andreas.stieger@gmx.de - use verbatim upstream tarball - add source URLs, see https://en.opensuse.org/SourceUrls ------------------------------------------------------------------- Wed Feb 26 10:52:06 CET 2014 - tiwai@suse.de - correct the license to GPL-2.0+ ------------------------------------------------------------------- Mon Dec 16 11:17:27 CET 2013 - tiwai@suse.de - Initial version 0.4.4: split from ladspa package - Patch carried from the original ladspa package caps-fix-double-free.diff
Locations
Projects
Search
Status Monitor
Help
OpenBuildService.org
Documentation
API Documentation
Code of Conduct
Contact
Support
@OBShq
Terms
openSUSE Build Service is sponsored by
The Open Build Service is an
openSUSE project
.
Sign Up
Log In
Places
Places
All Projects
Status Monitor
