File saptune.changes of Package saptune

Overview Repositories Revisions Requests Users Attributes Meta

File saptune.changes of Package saptune

-------------------------------------------------------------------
Fri Jun 28 13:36:47 UTC 2024 - abriel@suse.com

- update package version of saptune to 3.1.3
  * remove note 1868829 from solution S4HANA-APPSERVER as it is a
    HANA DB note and was added by accident
    (bsc#1226093)
  * for verify and simulate output table - wrap content of the
    columns 'actual', 'expected' and 'override', if they exceed a
    width of 30 characters (e.g. net.ipv4.ip_local_reserved_ports)
  * support inline comments in /etc/sysconfig/saptune
  * change handling of the performance options.
    Check, if the settings are supported in the get-Functions too.
    This should fix the problem with some special Azure VMs
    (E20d_v5) on newer SLES SPs
    (jsc#SAPSOL-110)
  * SAP Note 2578899 updated to Version 48
    setting kernel.pid_max to 4194304 and
    start sysctl-logger service

-------------------------------------------------------------------
Tue Apr  9 13:32:06 UTC 2024 - abriel@suse.com

- add require of package sysctl-logger for 15SP4 and 15SP5 too
  (jsc#PED-6220)

-------------------------------------------------------------------
Wed Feb 14 08:10:58 UTC 2024 - abriel@suse.com

- update package version of saptune to 3.1.2
  * to support setups with saptune monitoring and heavy automation
    we limited the setting of our saptune lock to commands having
    the potential to change anything in the system.
    (bsc#1219500)
  * fix timestamp in log messages of saptune
  * remove redundant version information in header comment of
    note definition files
  * SAP Note 1656250 updated to Version 63
    SAP Note 1771258 updated to Version 8
    SAP Note 2382421 updated to Version 45
    SAP Note 3024346 updated to Version 10
    but without parameter value changes, only house keeping of the
    version section and comment updates
  * SAP Note 1984787 updated to Version 42
    SAP Note 2578899 updated to Version 47

- add require of package sysctl-logger for 15SP6
  (jsc#PED-5025)

-------------------------------------------------------------------
Wed Nov  1 17:21:25 UTC 2023 - abriel@suse.com

- update package version of saptune to 3.1.1
  * typo in logfile directory name creates /varlog/saptune instead
    of /var/log/saptune
    (bsc#1215969)
  * SAP Note 2382421
    fix missing handling for Azure systems regarding parameter
    'net.ipv4.tcp_timestamps'. This exclude setting was left out
    during the last SAP Note update by mistake.
  * add parameter IGNORE_RELOAD to /etc/sysconfig/saptune to
    prevent saptune from stopping and starting the system tuning
    during package update
    Related to sapconf bug bsc#1209408.

- create a flag file in preinstall and remove it in posttrans of
  the package installation to inform saptune that currently a
  package installation/update takes place so that some special
  situations can be handled as expected.

-------------------------------------------------------------------
Wed Aug 30 15:24:11 UTC 2023 - abriel@suse.com

- update package version of saptune to 3.1.0
  * machine readable interfaces for saptune
    add json output support
    related json v1 schemas can be found after installation 
    on the system at /usr/share/saptune/schemas/1.0/
    (jsc#PED-2194, jsc#PED-2195, jsc#SLE-23696)
  * enhance the identification of the cloud service provider
    (jsc#SLE-23779)
  * add a command line syntax check
  * colorized and filtered output for 'saptune note verify'
    It is now possible to uses a 'color scheme' for the output to
    highlight the non-compliant parameter or to limit the verify
    output to show only non-compliant parameter.
    (jsc#SLE-23727)
  * add action 'saptune solution change' to switch to a new
    solution even that another solution was already applied.
    It's basically a 'revert OLDSOLUTION' && 'apply NEWSOLUTION'.
    This will change the Note order in case of additional applied
    Notes, but this is intended.
    The confirmation for the revert of the old solution can be
    suppressed by '--force'
    (jsc#PED-2196)
  * introduce a Trento naming convention for custom solutions in
    the saptune man page to support trento checks.
    (jsc#PED-4118)
  * deprecate action 'saptune note|solution simulate'.
    The action might get removed in a future saptune version
    (jsc#PED-2199)
  * deprecate support for the v1 vendor or custom specific Note
    definition file format
    (jsc#SLE-23725)
  * detect virtualization environment by 'systemd-detect-virt' and
    add the information to 'saptune status'.
    (jsc#SLE-23885)
  * enhance saptune with the new action 'check' to directly call
    the external check script '/usr/sbin/saptune_check'.
    (jsc#SLE-23726)
  * de-deprecate the MAXDB solution definition. It is still active
    supported by SAP.
    And add solution NETWEAVER+MAXDB
    (jsc#SLE-23724)
  * support inline comments in the Note definition files
    (jsc#SLE-23729)
  * rework Note representation in 'saptune status' output
    (jsc#SLE-24530)
  * fix problem with 'verify' output, if a sysctl parameter is
    empty on the system
    (bsc#1199527)
  * add hint to the manual page of saptune(8) regarding 'missing'
    line feed for 'saptune note applied' and 'saptune note enabled'
    It's intended.
    (bsc#1193714)
  * rework the version section to make it clear, which information
    needs to be provided
    (jsc#SLE-23722)
  * add more information to 'saptune status':
    differ between 'enabled' and 'applied' Solutions and add the
    related Notes.
    differ between Notes and Solutions in the staging area.
    rename 'system state' line to 'systemd system state' to prevent
    misunderstandings.
    add virtualisation information.
  * add tuning state to 'saptune status' output.
    The check of the tuning state (an internal 'verify' operation)
    can be skipped by using the flag '--non-compliance-check'.
    In this case the tuning state will be reported as
       unknown (checking disabled)
    'saptune status' will exit with a return code of '4', if the
    saptune service is enabled, the system is tuned, but the
    tuning state is 'not compliant'.
    (jsc#SLE-24928)
  * add support for the IBM Power architecture to the vendor and
    model section tagging
    (jsc#SLE-23824)
  * add new SAP Note 1868829 to set fs.aio-max-nr and add it to
    the HANADB related solutions for SLE12 and SLE15.
  * SAP Note 3024346 updated to Version 6
    SAP Note 1557506 updated to Version 16
    SAP Note 1656250 updated to Version 46
    SAP Note 1805750 updated to Version 9
    SAP Note 2161991 updated to Version 28
    SAP Note 2205917 updated to Version 63
    SAP Note 2382421 updated to Version 45
    SAP Note 2534844 updated to Version 15
    SAP Note BOBJ updated to Version 1
    but without parameter value changes, only house keeping of the
    version section and comment updates
  * SAP Note 1984787 updated to Version 40
    SAP Note 2578899 updated to Version 46
    SAP Note 2684254 updated to Version 23
    SAP Note 1680803 updated to Version 27
    includes version 3.1 of 'SAP Applications on SAP Adaptive
    Server Enterprise - Best Practices for Migration and Runtime'
  * Solution 'SAP-ASE' changed - remove SAP Note 1410736.
    The best practice document (version 3.1) for ASE was changed
    and the SAP Note 1410736 is no longer referenced. Instead the
    parameter 'net.ipv4.tcp_keepalive_time' is set in
    SAP Note 1680803 (the ASE SAP Note) directly.
  * introduce an additional parameter 'SKIP_SYSCTL_FILES' in the
    /etc/sysconfig/saptune configuration file, which contains a
    comma separated list of sysctl.conf files or directories
    containing sysctl.conf files, which should be excluded from
    the 'additional defined' WARNING messages.
    Default is
        SKIP_SYSCTL_FILES="/boot"
    to skip the WARNINGS for '/boot/sysctl.conf-<kernelversion>'

- check in preinstall and posttrans of the package installation,
  if the active tuned profile is still 'saptune', even that this
  profile no longer exists. If yes, try to remove it.
  (bsc#1194688)

-------------------------------------------------------------------
Mon Jan 10 14:04:03 UTC 2022 - abriel@suse.com

- update package version of saptune to 3.0.2
- avoid excluding LVM slaves when getting valid block devices
  (bsc#1194299)
- fix 'not compliant' state for energy_perf_bias on Power systems
  and suppress misleading error message regarding missing 'mokutil'
  (bsc#1193435)
- fix wrong behaviour of 'saptune revert all', if the saptune
  service was stopped between the two commands 'apply' and
  'revert all'
- 'saptune service enablestart|disablestop' now always perform
  both actions and does no longer stop working, if the service is
  already started|stopped.
  (bsc#1193241)
- restrict the sys section of the AWS note 1656250 to the
  availability of a nvme block device to support AWS x1e instances
  too.
  sys section definition of Note 1656250 changed.
  (bsc#1192029)
- abandon the dependency to 'mokutil' by relying on sysfs to
  detect a secure boot environment.
  Related to bsc#1193435
- support /etc/fstab entries with 4 instead of 6 fields as these
  are valid entries.
  Change error handling from 'panic' to error log messages.
  (bsc#1193580)
- enhance man page 'saptune.8'.
  Add entry 'configured Note' and some more descriptions of the
  entries from 'saptune service status'
  (bsc#1192697)
- as the Power systems (hardware architecture 'ppc64le') does not
  support files in '/sys/class/dmi' (this directory is not
  available on the 'ppc64le' hardware architecture) some of our
  section 'tags' will not work.
  Add some additional log messages to identify the cause and add
  a hint to the man page.
- fix block device settings (e.g. NRREQ) for multipath devices
  (bsc#1193576)
- 'saptune verify' will now report a non existing sysctl or sys
  parameter as 'not available on the system' (footnote) and this
  parameter will not affect the compliance state.
  But a warning is displayed to raise attention to may be typos in
  the parameter name.
- 'saptune status' now reports the 'real' unit state, no mapping
  of not running (inactive) service to simply 'stopped' any more.
  (bsc#1194334)

-------------------------------------------------------------------
Tue Nov  9 19:06:09 UTC 2021 - abriel@suse.com

- update package version of saptune to 3.0.1
- fix the scheduler settings for multi path devices and
  suppress missleading warning messages regarding vendor and model
  information during block device detection
  (bsc#1192460)
- fix override of custom solutions
  (bsc#1192062)
- add missing update function for enabled solutions and add a
  special fix to correct the 3.0.0 behavior
  (bsc#1192053)
- saptune_check - degraded system is no longer considered an error
  (bsc#1192272)
- log missing model and vendor information to the saptune log file
  (bsc#1190509)

-------------------------------------------------------------------
Mon Sep 13 13:03:36 UTC 2021 - abriel@suse.com

- update package version of saptune to 3.0.0
  This will be additional reflected in the saptune version found in
  /etc/sysconfig/saptune (SAPTUNE_VERSION)
  So now we will have saptune version 3
  
- saptune version 3
  Strengthen configuration process with staging, checks of external
  changes and expansion of automation to new platforms (Azure, AWS)
  and hardware specifics
  (jsc#SLE-21029 and jsc#SLE-20985)

- remove saptune version 1
  (jsc#SLE-10823 and jsc#SLE-10842)
- remove usage of tuned from saptune
  Add an own systemd service file for saptune to start/stop tuning
  of parameter values during a reboot of the system.
  Add a new saptune action 'service' to handle the saptune.service
  supporting start/stop/enable/disable/status a.s.m.
  The saptune action 'daemon', which handled tuned.service in the
  past, is now flagged as 'deprecated' and internally linked to the
  new action 'service'
  (jsc#SLE-5589, jsc#SLE-5588, jsc#SLE-6457)
- add a sanity check to detect Note definition files which do not
  exist anymore, because they were renamed or deleted, but without
  reverting them before.
  saptune will now print an error message, remove the Note from the
  tracking variables in /etc/sysconfig/saptune and try to revert
  the related parameter settings.
  (bsc#1149205)
- check, if json input file is empty and handle some left-over
  files from the migration from saptune v1 to saptune v2
  (bsc#1167618)
- To support system parameters only relevant for specific SLES
  releases, service packs and/or hardware architectures saptune
  now supports 'tagged' sections inside the Note definition files.
  (jsc#SLE-13246, jsc#SLE-13245)
- new kernel requirement for Power added to SAP-Note 2205917 and
  2684254
  SAP Note 2205917 updated to Version 61
  SAP Note 2684254 updated to Version 15
  (bsc#1167416)
- SAP Note 2382421 updated to Version 37
  and move all 'not-well-defined' parameters from the 'reminder'
  section into the 'sysctl' section, but with 'empty' values.
  Use an override file to define the values fitting your system
  requirements
  (bsc#1170672)
- support empty parameter values in the Note definition files and
  not only in the override file.
  This is needed for the support of SAP Notes like 2382421, so that
  the customer is able to simply use an override file to define
  some special parameters instead of using a customer specific Note
  definition file.
  needed for bsc#1170672
  (jsc#TEAM-1702)
- report an 'error' instead of 'info' and set the exit code to '1',
  if we reject the apply of a solution
  (bsc#1167213)
- Skip perf bias change if secure boot is enabled
  When a system is in lockdown mode, i.e., Secure Boot is enabled,
  MSR cannot be altered in user-space. So check, if Secure Boot is
  enabled using the mokutil utility and skip setting the perf bias
  in case it is.
  (bsc#1176243)
- rework the internal block device handling to speed up the apply
  of block device related tunings on systems with a high number of
  block devices.
  (bsc#1178207)
- change block device handling to handle multipath devices
  correctly. Only the DM multipath devices will be used for the
  settings, but not its paths.
  (bsc#1179275)
- fixed wrong comparison used for setting FORCE_LATENCY
  (bsc#1185702)
- add keyword 'all' to the 'rpm' section description in the man page
  saptune-note(5)
  (bsc#1182287)
- support note definition versions containing digits, upper-case
  and lower-case letters, dots, underscores, minus and plus signs.
  (bsc#1182289)
- fixed issue with 'verify' operation and parameter
  'VSZ_TMPFS_PERCENT'. As this parameter is only used to calculate
  the value of 'ShmFileSystemSizeMB' (if it is not set to a value
  >0 in the Note definition file) it will not be checked and
  compared during the saptune operation 'verify'. A footnote is
  pointing this out.
  (bsc#1182009)
- SAP Note 1771258 update nofile values
  (bsc#1164720)
- SAP Note 2684254 updated to Version 20
  SAP Note 2578899 updated to Version 39
  SAP Note 1680803 updated to Version 26

- enhancements for saptune version 3
  All jsc#TEAM-* entries mentioned below are related to this rework
  (jsc#SLE-16972)

- Implement a lock to avoid multiple instances of saptune running
  in parallel.
  (jsc#TEAM-1700)
- Support for non-colorized output
  If redirecting the output from saptune to a pipe, you no longer
  need to deal with the 'ugly' control sequences for the colorized
  output.
  (jsc#TEAM-1679)
- Add enable/disable for systemd units and support all systemd unit
  types in section [service]
  (jsc#TEAM-1701)
- remove script /usr/share/doc/packages/saptune/sapconf2saptune
  and the associated man page
  (jsc#TEAM-1707)
- implement staging of Note definition file and solution
  definitions.
  The idea is to freeze the saptune configuration to avoid config
  changes on package update when adding/removing/changing notes
  or solutions within the package
  (jsc#TEAM-1844)
- support custom solutions and override files for solutions.
  Partners and customers will now be able to define their own
  solution definitions by using files in /etc/saptune/extra
  or to override the shipped solution definitions by using
  override files in /etc/saptune/override
  (jsc#TEAM-1706)
- support for device specific configurations 
  only supported for the [block] section, tags are 'vendor' and
  'model' to support special block devices of a dedicated hardware
  vendor or a dedicated hardware model
  (jsc#TEAM-1728)
- add support for AZURE cloud (SAP Note 2993054)
  (jsc#TEAM-2676)
- add support for AWS cloud (SAP Note 1656250)
  (jsc#TEAM-1754 and jsc#TEAM-1755)
- add NVMe support to the block device handling to support AWS
  (jsc#TEAM-2675)
- add SAP Note 3024346 (a NetApp note)
  (jsc#TEAM-3454)
- rework daemon and service actions
  (jsc#TEAM-3154)
- add support for 'read_ahead_kb' and 'max_sectors_kb' to the
  [block] section
  (jsc#TEAM-1699)
- add a warning to the reminder section of SAP Note 2382421
  regarding iSCSI devices and setting of 'net.ipv4.tcp_syn_retries'
  (jsc#TEAM-1705)
- for the actions 'note customise' and 'note create' check, if the
  customer has changed something during the editor session.
  If not, remove the temporary created note definition file.
  (jsc#TEAM-825)
- add support for [sys] section
  and handle double configurations for parameters defined in the 
  [sys] section
  (jsc#TEAM-3342)
- check system sysctl config files as mentioned in the comments of
  /etc/sysctl.conf and in man page sysctl.conf(5) for sysctl
  parameters currently set by saptune notes. Print a warning and a
  footnote for 'verify' and 'customize'.
  (jsc#TEAM-1696)
- add support for [filesystem] section
  only check filesystem mount options, not modify. Starting with
  filesystem type 'xfs'
  (jsc#TEAM-4093)
- add SAP Note 900929 for SAP Netweaver workloads.
  It's the equivalent to the HANA Note 1980196.
  (jsc#TEAM-4386)
- mv state files from /var/lib/saptune to /run/saptune to solve
  the problem of state files surviving a reboot.
- add /sbin/saptune_check
- add the description of the solution definitions shipped with
  saptune to the man page saptune(8)
  (jsc#TEAM-4260)

-------------------------------------------------------------------
Mon Feb 25 16:59:15 UTC 2020 - abriel@suse.com

- update version of saptune v2 to 2.0.3
- changes to the UserTasksMax handling in saptune
  In SLE15 the limit is removed from the systemd login manager and
  therefore the setting is no longer supported in SLE15 by saptune.

On a system running SLE12 we do not restart the logind service,
  but try to reload the new configuration after creating or
  removing the drop-in file for UserTasksMax by using
  'systemctl reload-or-try-restart systemd-logind'
  as display managers do not like a restart of the logind service.
  (bsc#1161791)
- add commands for listing enabled Notes/Solutions to saptune
  (bsc#1160564)
- correct typo in the year in the man page headline of man page
  saptune-note(5)
- SAP Note 1410736 updated to Version 6
  correct typo net.ipv4.tcp_probes to net.ipv4.tcp_keepalive_probes

-------------------------------------------------------------------
Tue Jan 14 14:57:59 UTC 2020 - abriel@suse.com

- if a parameter is not supported by the system, the note action
  'verify' will no longer report this as an error even if the value
  is not compliant.
  Additionally if there is a non compliant 'grub' parameter, which
  has a compliant 'alternative' setting availabel (see man page 
  saptune-note(5) for details), the note action 'verify' will no
  longer report this as an error
  (bsc#1159671)

-------------------------------------------------------------------
Thu Jan  2 12:33:00 UTC 2020 - abriel@suse.com

- remove no longer needed and now misleading message at the end of
  note action 'revert'.
- check, if sapconf service is available before disabling this
  service during 'saptune daemon start'
  (bsc#1156049)

-------------------------------------------------------------------
Tue Dec  3 09:37:55 UTC 2019 - abriel@suse.com

- add action 'delete' to the 'note' operation to delete a customer
  or vendor specific Note definition file including the
  corresponding override file if available.
  A confirmation is needed to finish the action.

add action 'rename' to the 'note' operation to rename a customer
  or vendor specific Note definition file to a new name. If a
  corresponding override file is available, this file will be
  renamed too. A confirmation is needed to finish the action.

If the Note is already applied, the action will be terminated
  with the information, that the Note first needs to be reverted
  before it can be deleted or renamed.
  (jsc#SLE-9283)

-------------------------------------------------------------------
Fri Nov  8 17:03:01 UTC 2019 - abriel@suse.com

- Inform the customer that - by intention - the command 
         'saptune note customise <NoteID>'
  does not apply changes immediately. It just changes the
  configuration in the 'override' file. These changes have to be
  applied in a second step.
  This is explained in the man page saptune_v2(8) and a message is
  printed in the logs and on the screen to inform the customer.
  (bsc#1142467)

-------------------------------------------------------------------
Thu Nov  7 09:59:54 UTC 2019 - abriel@suse.com

- Add warning to man page, not to rename/remove/modify active
  configurations
  (bsc#1149002)

-------------------------------------------------------------------
Mon Oct 28 12:27:21 UTC 2019 - abriel@suse.com

- update version of saptune v2 to 2.0.2
- support multi-queue I/O scheduler for block devices
  (bsc#1152598)

-------------------------------------------------------------------
Fri Oct  4 11:24:11 UTC 2019 - abriel@suse.com

- check, if the directory /etc/security/limits.d exists before
  writing the limits drop-in file. If not, create it.

- add the '--no-pager' option to 'systemctl --list-unit-files' to
  get all services at once.

- add missing search pattern to the update helper script to find all
  old and superfluous notes during upgrade from SLE12 to SLE15

For the daemon operations do not exit with an error, if a note
  definition file does not exist. Instead only log and print an
  error message, but continue with applying the other notes
  (bsc#1142526)

-------------------------------------------------------------------
Fri Jul 19 08:49:08 UTC 2019 - abriel@suse.com

- on 12SP1 and 12SP2 the directory /etc/security/limits.d may not
  exist. So create the missing directory during postinstall of the
  package.

-------------------------------------------------------------------
Mon Jun 17 10:15:05 UTC 2019 - Angela Briel <abriel@suse.com>

- update version of saptune v2 to 2.0.1
- update version of saptune v1 to 1.1.9 for migration purposes
- resetting all values to clean the system during package removal

- bugfixing saptune version 1:
  fix saptune issues with /etc/security/limits.conf (bsc#1124485)
  add deprecated message to the description of some notes
  set scheduler for note SUSE-GUIDE-01 correctly (bsc#1123808)

No additional improvements or upgrades planned for saptune v1
  For new features or current SAP Note settings please migrate to
  saptune v2.

- support migration from saptune v1 to saptune v2
  ship both versions of saptune in one package to support a
  smooth migration controlled by the customer.
  see man saptune-migrate(5) for more information
- support note name changes and note deletion during update of
  saptune v2 from SLE12 to SLE15
- support different SAP Note definitions and solution definitions
  related to the used operation system version
  (distinguish between SLE12 and SLE15 at the moment)

- Remove calculation of optimized values, only set the values from
  the configuration file irrespective of the current system value.
  Current system value can be increase or decrease.
  ATTENTION: saptune no longer respects higher system values.
  Use the override option to change the values of the Note
  definition files, if needed
  (bsc#1124488)

- mark the Notes SUSE-GUIDE-01 and SUSE-GUIDE-02 as deprecated in
  saptune v1 and remove these Note definitions from saptune v2
  (bsc#1116799)
- add support helper script sapconf2saptune and the man page
- add new man pages saptune_v1.8, saptune_v2.8, saptune-note.5
  and saptune-migrate.7
  rewrite man page saptune.8
- add bash-completion for saptune
- add action 'show' to the 'note' operation to print content of
  the note definition file to stdout
- add new action 'create' to support the customer/vendor while
  creating a vendor or customer specific file in /etc/saptune/extra
  using the template file /usr/share/saptune/NoteTemplate.conf
- simplify file name syntax for the vendor files available in
  /etc/saptune/extra. Old file names still valid and supported.
  Add header support (version, date, description) for the vendor
  files available in /etc/saptune/extra as already available for
  the note definition files in /usr/share/saptune/notes
- no longer write or remove entries from /etc/security/limits.conf.
  Instead add or remove drop-in files in /etc/security/limits.d
  The filename syntax for the drop-in files /etc/security/limits.d
  is saptune-<domain>-<item>-<type>.conf
  The limits entry syntax inside the Note definition files changed
  to support more than one limits settings in the definition file
  (bsc#1128322)
- preserve comment sections of the security limits file
  /etc/security/limits.conf. Especially, if this is the only
  content of the file.
  (bsc#1124485)
- work with the current Note definition file to define the pagecache
  settings and not with the default file
  rename PAGECACHE_LIMIT_IGNORE_DIRTY to the correct sysctl name
  vm.pagecache_limit_ignore_dirty
  (bsc#1126220)
- setting of UserTaskMax is not done in the postinstall of the
  package. It's now done by applying the related SAP Notes.
  (bsc#1124489)
- starting to support severities INFO, WARNING, ERROR and DEBUG
  for the logging and add a defined format for the log messages
- remove saptune as active tuned profile during action
  'saptune daemon stop'
- start/stop services, if requested by SAP Notes, but do not
  enable/disable these services
  (bsc#1128325)
- adapt the parameter oriented save state file handling (store and
  revert) to the special needs of the security limits parameter
  (bsc#1124485)
- disable parameter settings using an override file (bsc#1124486)
- store the order of the note as they are applied to get the same
  system tuning result after a system reboot as before
- correct the revert of the vm.dirty parameters by handling their
  counterpart parameters in addition.
  (bsc#1124487)
- adjust operation customize to the new configuration files and
  override location and enable customize option for vendor and
  customer specific files in /etc/saptune/extra
  (bsc#1124487)
- Change output format of the operations list, verify and simulate
  (bsc#1124487)
- Display footnotes during 'verify' and 'simulate'
  (bsc#1124487)
- print current applied note order at the end of 'saptune note list'
  and 'saptune note verify'
- remove Netweaver formula for page cache calculation. Use the
  HANA approach '2% system memory' for both
- display a warning message, if a [block] section is found in the
  Note definition file because on systems with a huge number of
  block devices this operation may take some time
- Add force_latency handling to 'cpu' section.
  Use the files in /sys/devices/system/cpu/cpu* instead of
  /dev/cpu_dma_latency.
  Remove the parameter from the tuned.conf file and add it to
  the SAP note files '1984787' and '2205917'
- Add action 'saptune revert all' and add parameter based saved
  state files to support proper revert functionality
  (bsc#1124487)
- Add override file handling for the solution definition using
  /etc/saptune/override/solution (bsc#1124486)
- Read solution definition from file /usr/share/saptune/solution
  instead of static coding inside of saptune.
  (bsc#1124486)
- tag deprecated solutions during list operation
- allow only ONE solution to be applied
- new solution definitions as discussed with SAP and Alliance team
- support solution names with '+'
- make sure a note, which is part of an applied solution definition,
  but was reverted manually later, will NOT applied again after a
  system reboot.
- One configuration file per SAP Note (bsc#1124486)
- add new SAP Notes and adapt content of SAP Notes
- Handle different locations of the new configuration files
  (/usr/share/saptune/note, /etc/saptune/extra)
  (bsc#1124486)
- Allow parameter override by the customer (bsc#1124486)
- Expand section handling of the 'ini file' handler to handle the
  new configuration file entries. Supported sections:
  version, reminder, login, mem, vm, block, limits, sysctl,
  pagecache, cpu, service, rpm, grub
  (bsc#1124486)

-------------------------------------------------------------------
Thu Jan  3 14:09:01 UTC 2019 - abriel@suse.com

- remove new line from println arg list of main.go to support newer
  go versions.
  (bsc#1120741)
- update version to 1.1.8

-------------------------------------------------------------------
Thu Oct 25 08:33:28 UTC 2018 - abriel@suse.com

- never ever stop or disable uuidd.socket in saptune (bsc#1100107)
- update version to 1.1.7

-------------------------------------------------------------------
Thu Apr 26 13:32:53 UTC 2018 - abriel@suse.com

- correct content of /etc/systemd/logind.conf.d/sap.conf.
  (bsc#1089864)

- improve error messages and exclude special block devices
  from 'number of request' settings. Improve the verify option for
  the block devices.
  (bsc#1079599)

-------------------------------------------------------------------
Thu Feb  8 09:32:45 UTC 2018 - gboiko@suse.com
 
- Fix a typo in package description. (bsc#1053374)
- Update from version 1.1.3 to 1.1.4

-------------------------------------------------------------------
Fri Dec 15 10:30:39 UTC 2017 - abriel@suse.com

- Start to support multiqueue schedulers.
  Writing a message to the log file, if a block device does not
  support the choosen scheduler.
  (bsc#1072562)

-------------------------------------------------------------------
Wed Dec 13 08:53:33 UTC 2017 - abriel@suse.com

- Check, if pagecache limit is available at the system. If yes, add
  SAP note 1557506 to the note list and the solution definition of
  saptune. If not, skip SAP note 1557506 silently
  (bsc#1071539, fate#323778)

-------------------------------------------------------------------
Mon Dec 11 15:40:25 UTC 2017 - abriel@suse.com

- Skip using tuned-adm command inside of saptune. Instead write 
  'saptune' profile directly to /etc/tuned/active_profile and
  enable and start the tuned service
  Remove the workaround for the tuned problem with section [cpu]
  (bsc#1060514)

-------------------------------------------------------------------
Fri Nov 10 13:32:05 UTC 2017 - abriel@suse.com

- workaround for a tuned problem with section [cpu]
  (bsc#1060514)

-------------------------------------------------------------------
Wed Oct 25 14:44:39 UTC 2017 - abriel@suse.com

- support customer entries in /etc/security/limits.conf containing 
  values like 'unlimited' instead of an integer value.
  (bsc#1060469)
- change error handling and redirect error messages to stderr instead
  of stdout. (bsc#1050521)

-------------------------------------------------------------------
Fri Aug 11 08:48:41 UTC 2017 - hguo@suse.com

- Fix a typo in package description.
  (bsc#1053374)

-------------------------------------------------------------------
Tue Jun 27 12:12:32 UTC 2017 - abriel@suse.com

- Amend logind's behaviour
  (bsc#1031355, bsc#1039309, bsc#1043844)

-------------------------------------------------------------------
Fri May 12 08:28:43 UTC 2017 - abriel@suse.com

- update man page to reflect the changes for bsc#1026172

-------------------------------------------------------------------
Thu Apr 27 15:51:02 UTC 2017 - abriel@suse.com

- add solution SAP ASE (Sybase) and SAP Business OBJects (BOBJ)
  according to fate#320359.

-------------------------------------------------------------------
Fri Mar 24 13:32:38 UTC 2017 - abriel@suse.com

- Support of vendor specific tune files located in /etc/saptune/extra
  (bsc#1026172).

-------------------------------------------------------------------
Mon Nov 14 13:12:21 UTC 2016 - hguo@suse.com

- Tune a PowerPC little endian system in a way similar to x86 system.
  Bump version to 1.0.5 to fix (bsc#1009529).

-------------------------------------------------------------------
Fri Oct 21 12:58:32 UTC 2016 - hguo@suse.com

- Fix processing of CLI parameter "--help" (bsc#1006114).
- Fix startup failure caused by absence of sapconf package (bsc#1006187).

-------------------------------------------------------------------
Tue Aug  2 12:51:35 UTC 2016 - hguo@suse.com

- Avoid conflicting with sysconfig path of sapconf. (bsc#988186)
  Bump versin to 1.0.3.

-------------------------------------------------------------------
Fri Jul  8 11:50:27 UTC 2016 - hguo@suse.com

- Remove conflict against sapconf to resolve
  bsc#988186.
  Bump version to 1.0.2.

-------------------------------------------------------------------
Mon Jul  4 08:58:42 UTC 2016 - hguo@suse.com

- Exclusively build on X86_64 and PPC64le.
  Continue with fate#320360, fate#320361, fate#320362, fate#320633.

-------------------------------------------------------------------
Fri Jun  3 09:26:13 UTC 2016 - hguo@suse.com

- Remove ExclusiveArch.
- Control uuidd as part of the tuning process.
- Minor changes in the wording of CLI program output.
- saptune conflicts with sapconf.
- Bump version to 1.0.1.
- fate#320360, fate#320361, fate#320362, fate#320633.

-------------------------------------------------------------------
Thu Apr 28 09:32:50 UTC 2016 - hguo@suse.com

- First revision.
  Implement fate#320360, fate#320361, fate#320362, fate#320633.

Places

File saptune.changes of Package saptune

Places