openSUSE Build Service

Overview Repositories Revisions Requests Users Attributes Meta

File hamlib.changes of Package hamlib (Revision 6826c42dca2cba57ad01f347f75b3916)

Currently displaying revision 6826c42dca2cba57ad01f347f75b3916 , Show latest

-------------------------------------------------------------------
Wed Jan  6 08:08:04 UTC 2021 - Walter Fey <dl8fcl@darc.de>

- update to version 4.1_git20210105
  * Change Barrett 950 version number
  * Fix Barret 950 set_freq Change Barrett 950 to use channels 441-450 for
     10-band memory
  * Change FT897 write_delay to 5ms -- MicroHam seems to need it
  * Another attempt to get FT2000 RFPOWER_METER correct for both 0-1 and
    watts readings
  * Add FT-897D
  * Add ft100_get_ctcss_tone, ft100_get_dcs_code, ft100_get_rptr_shift
  * Fix PowerSDR STRENGTH
  * Fix flrig STRENGTH call
  * Fix RIG_LEVEL_STRENGTH break in flrig.c
  * Add Barrett 950
  * Change max baud on ic7300 to 115,200
  * Update copyright

-------------------------------------------------------------------
Tue Dec 29 09:20:34 UTC 2020 - Walter Fey <dl8fcl@darc.de>

- update to version 4.1_git20201229
  * New rig Yaesu FTDX10
  * Normalize Yaeus DX model names
  * Fix flex RFPOWER_METER_WATTS level
  * Add RIG_MODE_SPEC to misc.c
  * Add DIGU/DIGL for flrig modes for PowerSDR
  * Fix g313_caps undefined referenced
  * Add C4FM mode to flrig.c
  * Fix newcat.c uninitialized var
  * Add bank select to IC-7100
  * Fix RIG_PASSBAND_NOCHANGE use with Icom data modes. Allow selecting FIL2 as
    normal passband when in data mode. Add new Icom rigs to list that
    determines whether Icom data mode command supports setting filter too.
  * Do not band select on FT891 as it does not remember bandwidth
  * Fix icom default filter settings

-------------------------------------------------------------------
Fri Dec 18 14:54:37 UTC 2020 - Walter Fey <dl8fcl@darc.de>

- update to version 4.1_git20201218
  * Reorder newcat_band_index
  * Fix gpredict behavior with cross band split
  * Fix SH command for FT-450
  * Add powermeter_scale to flrig
  * Fix flex6xxx RFPOWER_METER_WATTS
  * Fix and update Prosistel rotator backend
  * Change ft857 gnet_freq to recognize RIG_VFO_A
  * Fix ft897 get_freq to allow RIG_VFO_A too
  * Added flrig LEVEL values STRENGTH, RF, AF, RFPOWER_METER, MICGAIN
  * Fix datamode set in icom.c to use 0x00 0x00 per the manual for 7300 and 9700
  * Set icom_set_mode to use existing filter for passband nochange
  * Fix icom filter value, not ASCII!!!
  * Normalize Yaesu RFPOWER_METER_LEVELS to 100W This is a quick fix for most
    Yaesu rigs. We need a new RIG_LEVEL_RFPOWER_METER_WATTS to return watts
    instead of 0-1.0
  * Add power level to ft891, ftdx9000, ft1200, ft991
  * Fix FT450 power levels
  * Fix retries in newcat.c
  * Fix RFPOWER levels for ftdx101
  * Fix retry_save for Kenwood rigs

-------------------------------------------------------------------
Thu Dec 10 09:38:11 UTC 2020 - Walter Fey <dl8fcl@darc.de>

- update to version 4.1_git20201210
  * Fix retry_save during Yaesu poweron
  * Fix newcat SH parsing
  * Change newcat.c set_powerstat=1 to loop logic same as kenwood
  * Add 1 second sleep after power on for Yaesu rigs
  * Remove get_vfo permanently from ft891.c
  * Do not expect a reply from GS-232B stop command. Fix GS-232B retry error code.
  * Tuning FT-2000 filter code
  * Add missing levels and fix filters for Yaesu FT-2000
  * Fix compilation with libxml2
  * Fix SH command for ft891

-------------------------------------------------------------------
Fri Dec  4 12:17:56 UTC 2020 - Walter Fey <dl8fcl@darc.de>

- update to version 4.1_git20201203
  * Add support for ROT_LEVEL_SPEED level in rotator backends that support
    setting the rotator speed via the move command.
  * Add flushx parameter to rotctl
  * Remove get_vfo from ft897.c
  * Add NOCHANGE_PASSBAND to icom...cascading effect on adding vfo elsewhere.
  * Some notes about microham router
  * Add M2 RC2800 Az-only model Promote RC2800 to stable
  * Remove echo expectation from rc2800 rotor
  * Change rc2800 rotator to use CR instead of LF for terminating char
  * Fix kenwood retry attempts https://github.com/Hamlib/Hamlib/issues/450
  * Add flushx option for MicroHam devices to allow flushing by read instead
    of tcflush.

-------------------------------------------------------------------
Mon Nov 23 09:00:32 UTC 2020 - Walter Fey <dl8fcl@darc.de>

- update to version 4.1_git20201122
  * Remove set_vfo from ft897.c
  * Remove RIG_BUSY drop through in newcat.c when command doesn't match or is
    not terminated correctly.
  * Promote IC-705 to stable
  * Add RIG_METER_TEMP for FTDX101D and other newcat.c rigs

-------------------------------------------------------------------
Fri Nov 13 07:52:36 UTC 2020 - Walter Fey <dl8fcl@darc.de>

- update to version 4.1_git20201111
  * Add FUNC_TUNE to Flex/PowerSDR
  * Remove RIG_PASSBAND_ROOF
  * Fixes and improvements for Yaesu FT-891, FT-991, FTDX 5000, FTDX 3000
  * Restrict newcat.c bands to ITU regions and use GEN as default otherwise
  * Fix get/set_xit for Yaesu rigs
  * Fix set_mode for IC-7000
  * Change yaesu newcat_get_rit to use "OI" instead of vfo swapping
  * Remove bad targetable code from rigs

-------------------------------------------------------------------
Mon Nov  2 21:17:38 UTC 2020 - Walter Fey <dl8fcl@darc.de>

- update to version 4.1_git20201101
  * Enhance ic7000 set bandwidth and prompt ic7000
  * Add IC-729
  * Add RIG_TARGETABLE_PTT and RIG_TARGETABLE_RITXIT for most rigs
  * Add more targetable flags
  * Implement ext level for Yaesu roofing filter
  * Add more meters for Yaesu newcat rigs
  * Fixes for Yaesu and Kenwood rigs
  * Update rigctld.1 man page

-------------------------------------------------------------------
Thu Oct 22 14:29:52 UTC 2020 - Walter Fey <dl8fcl@darc.de>

- update to version 4.1_git20201021
  * Add wait_morse to kenwood and icom rigs
  * Fix kenwood_get_power_minmax
  * Prompt TT-538 to Stable
  * Changes for future 4.1 caching
  * Improvements and fixes for FT-817
  * Fix FTDX101D get COMP function
  * Add rig_stop_morse to API and stop_morse command for rigctl
  * Change get_ptt RTS/DTR to keep serial port open
  * Fix FT817 FT817_NATIVE_CAT_GET_RX_STATUS byte count
  * Fix ability to get Sub VFO in newcat get_func
  * Don't expire cache if we just read the freq

-------------------------------------------------------------------
Sat Oct 10 15:29:58 UTC 2020 - Walter Fey <dl8fcl@darc.de>

- update to version 4.1_git20201010
  * Fixes for for YAESU rigs
  * Fixes for Kenwood TS950

-------------------------------------------------------------------
Sun Oct  4 09:33:18 UTC 2020 - Walter Fey <dl8fcl@darc.de>

-  update to version 4.1_git20201004
  * Improvements to PowerSDR
  * Fixes for FTDX101D
  * Fix VOXDELAY to use ms internally in newcat.c
  * A lot of fixes and improvements for Kenwood rigs

-------------------------------------------------------------------
Mon Sep 28 14:40:40 UTC 2020 - Walter Fey <dl8fcl@darc.de>

- update to version 4.1_git20200928
  * FTDX101D MS command now using VFO selectioni
  * Add RIG_TARGETABLE_PURE to ftdx101 and ftdx5000 Change newcat_get_level and
    set_level check to RIG_TARGETABLE_PURE
  * Add RIG_TARGETABLE_FUNC and RIG_TARGETABLE_TONE to ftdx101d Ensure VFO is
   only set on FUNC calls when TARGETABLE_FUNC is on for newcat.c
  * Allow yaesu 3+char read cmds to not invalidate the IF cache

-------------------------------------------------------------------
Mon Sep 21 15:28:25 UTC 2020 - Walter Fey <dl8fcl@darc.de>

- update to version 4.1_git20200919
  * Add FUNC RIT XIT and LEVEL AGC to PowerSDR
  * Add func NB ANF MUTE to PowerSDR
  * Add LEVEL_AF to PowerSDR
  * Add Thetis/ANAN to PowerSDR description
  * Add SQL to PowerSDR
  * Added VOX and VOXGAIN to PowerSDR
  * Fix PowerSdr MICGAIN for levels -40 to 10 it returns #382
  * Fix MICGAIN to 0-100 range in kenwood.c
  * Add set_level MICGAIN to kenwood.c
  * Update man pages for get_chan and set_ant
  * Add MICGAIN to ts590 LEVEL set
  * Fix ts590 LEVEL_AF
  * Fix icom LEVELs
  * Add ic7300_get_parm and ic7300_set_parm
  * Fix ic7300 VOXDELAY and other extcmd structures
  * Added CMD_PARAM_TYPE values for icom rigs to distinguish the different ext
    cmd types https://github.com/Hamlib/Hamlib/issues/373
  * Fix bindings since itu_region has been deprecated
  * Fix ft857 RFPOWER https://github.com/Hamlib/Hamlib/issues/368
  * Fix ic7300 ranges

-------------------------------------------------------------------
Mon Sep  7 09:08:12 UTC 2020 - Walter Fey <dl8fcl@darc.de>

- update to version 4.1_git20200906
  * Advance to 4.1~git
  * Added IC-705
  * Small update to cppcheck.sh
  * Fix stack smash in sprintflst when long lists occur

-------------------------------------------------------------------
Fri Sep  4 19:23:39 UTC 2020 - Walter Fey <dl8fcl@darc.de>

- update to version 4.0_git20200904
  * Fix set_powerstat for ft817 and add for ft857 ft897
  * Remove warning from ampctl.c
  * Fix cppcheck errors and warnings
  * Fix spelling of Funkamateur
  * Fix Yaesu command retries
  * Remove icom_set_rit - it doesn't (and can't) work - see README.icom

-------------------------------------------------------------------
Tue Sep  1 06:52:26 UTC 2020 - Walter Fey <dl8fcl@darc.de>

- update to version 4.0_git20200901
  * fix TS-950SDX with Microkeyer III - #359
  * Fix -Z time display

-------------------------------------------------------------------
Sun Aug 23 17:07:22 UTC 2020 - Walter Fey <dl8fcl@darc.de>

- update to version 4.0_git20200821
  * Add minimal WRITE_DELAY to ft817
  * fix issue 358, TS-990 MicroKeyer III baud errors

-------------------------------------------------------------------
Tue Aug 11 12:38:00 UTC 2020 - Walter Fey <dl8fcl@darc.de>

- update to version 4.0_git20200811
  * Fix spelling error in kenwood.c
  * Add some debug to serial.c
  * Add 230400 serial speed

-------------------------------------------------------------------
Tue Aug  4 20:49:37 UTC 2020 - Walter Fey <dl8fcl@darc.de>

- update to version 4.0_git20200804
  * deprecate itu_region
  * Fix FT1000MP set_rit
  * Add first cut of SWR conversion for Yaesu
  * Fix RFPOWER scale for FT991
  * Implement RIT/XIT

-------------------------------------------------------------------
Thu Jul 23 15:10:18 UTC 2020 - Walter Fey <dl8fcl@darc.de>

- update to version 4.0_git20200723
  * PowerSDR rig now recognizes 10 modes 0-11 but not SPEC or DRM
  * Add ability to set Icom MAIN_VFO_A/B and SUB_VFO_A/B
  * Fix icom MainA/B SubA/B VFO selection
  * Add lua 5.4 support
  * Add 4m to FTDX101D and promote to stable
  * Add 4m EUR to FTDX101D

-------------------------------------------------------------------
Sat Jul 18 08:42:01 UTC 2020 - Walter Fey <dl8fcl@darc.de>

- update to version 4.0_git20200717
  * Upgrade some rigs to STABLE
  * Fix kenwood_get_rit to utilize the +/- sign
  * Fix get_rit of negative RIT for ft1000mp.c

-------------------------------------------------------------------
Mon Jul 13 12:33:38 UTC 2020 - Walter Fey <dl8fcl@darc.de>

- update to version 4.0_git20200712
  * Add 6m to ft857 and ft897 ranges
  * Update ITU3 bandplan

-------------------------------------------------------------------
Sat Jul  4 08:07:53 UTC 2020 - Walter Fey <dl8fcl@darc.de>

- update to version 4.0_git20200704
  * Add FT818 to rigs as copy of FT817
  * Fix compile errors and warnings

-------------------------------------------------------------------
Tue Jun 30 07:06:55 UTC 2020 - Walter Fey <dl8fcl@darc.de>

- update to version 4.0_git20200629
  * Add debug to FT817/857/897 Add fallback to non-ack protocol with 10ms
    post_write_delay if ack error occurs #330
  * Change ft857 and ft897 to use ft815_read_ack and dynamic post_write_delay
    instead of static. #330
  * Reduce FT991 post_write_delay based on testing
  * Add logic for port only call like rigctl -m 2 -r :4532 #331
  * Remove cache from FT-817 get_freq #329
  * Change timeout length on kenwood startup when com not responding to approx
    10 seconds #311

-------------------------------------------------------------------
Wed Jun 24 12:03:52 UTC 2020 - Walter Fey <dl8fcl@darc.de>

- update to version 4.0_git20200624
  Latest commit included 65de309e7066cb2967e9e6a9bc1790853c9c6ecf
  * Fix FT-DX101D get_tx_vfo
  * Fix compatibility between 3.3 rigctl and 4.0 rigctld
  * Change amplifiers and rotators to standard version format and promote
    a few to stable
  * Fix icom.c so most all satmode requests are restricted to rigs with
    RIG_FUNC_SATMODE. #288
  * Fix FT-DX101D get_tx_vfo FT command. #293
  * Change icom_get_split_freq. #291
  * Change civ_731 back to 0 for ic706. #294
  * Change icom.c VFO_TX VFO_RX adjustment. #299
  * Fix get_split behavior in rig.c. #303
  * Change newcat.c to assume split is on VFO_B. #244
  * Rigs will only power up once if needed. #297

-------------------------------------------------------------------
Mon Jun  8 07:05:42 UTC 2020 - Walter Fey <dl8fcl@darc.de>

- update to version 4.0_git20200608
  Latest commit included ee6703107f8aecc47effafd1f21291fbb35d3fd5
  * Implement set/get_vfo for FT-897
  * Bug fixes

-------------------------------------------------------------------
Sun May 31 21:17:25 UTC 2020 - Walter Fey <dl8fcl@darc.de>

- update to version 4.0_git20200531
  Latest commit included 94e8859a6f0725994435b414e1cae402a3c9bce4
  * Add rules for setting VFO_RX and VFO_TX #261
  * Rewrite of TARGETABLE_MODE for YAESU rigs. #260
  * Fix FT1000MP status return length. #258
  * Add alpha version of Elecraft K4
  * rigctld now works with rigctl in vfo mode. #259
  * Add PowerSDR rig
  * Fix elevation command for meade.c. #267
  * Disallow requesting a vfo that the rig doesn't have.
  * Revert rig_debug to use 16384 buffer to avoid compilation warnings.

-------------------------------------------------------------------
Thu May 21 10:50:02 UTC 2020 - Walter Fey <dl8fcl@darc.de>

- update to version 4.0_git20200521
  Latest commit included e197a9ce94389f9c1ba1e7c1f36664276816959b
  * IC-9700 in satmode requesting "S 1 Sub" will now return RIG_OK without
    taking any action
  * Extra VFO argument returned from the "f" command so removed for now
  * URL in README fixed
  * Fix dcs/ctcss functions for FT-991
  * Fix gs232b get_pos error along with all other no_reply commands
  * Fix icom detection of split mode setting vfos
  * Update icm803.c

-------------------------------------------------------------------
Sun May 17 18:19:01 UTC 2020 - Walter Fey <dl8fcl@darc.de>

- update to version 4.0_git20200516
  Latest commit included 1af16507168d7b89675043707aa8a52098194cd3
  * Ensure ptt defaults to 0 for rigctl
  * Fix IC910 satellite mode operations
  * Change TS440 model name to TS440S
  * Change icom behavior for IC-9700 type rig with Main/A/B && Sub A/B setup

-------------------------------------------------------------------
Wed May 13 08:35:30 UTC 2020 - Walter Fey <dl8fcl@darc.de>

- update to version 4.0_git20200512
  Latest commit included 15787643ae5ef9b9668cf324b0ee5bbb21ec7409
  * Improve flrig retry handling
  * Fix IC-910 split mode operation with gpredict
  * Add FT-991 repeater offset capability

-------------------------------------------------------------------
Sun May 10 19:04:34 UTC 2020 - Walter Fey <dl8fcl@darc.de>

- update to version 4.0_git20200509
  Latest commit included 429ab72a16d187f1714b16995c89174f21c0131a
  * Fix get_powerstat in kenwood.c
  * Add 4M band to FT847 and reduce to just 1 rx/tx_range
  * Fix FT847 freq ranges
  * Fix ft991 mode/width settings

-------------------------------------------------------------------
Thu May  7 17:57:16 UTC 2020 - Walter Fey <dl8fcl@darc.de>

- update to version 4.0_git20200507
  Latest commit included 067f95dda85a7b12db8d3dc29c9d73d8c4476016
  * Bug fixes #234, #235, #236

-------------------------------------------------------------------
Thu Apr 30 14:31:16 UTC 2020 - Walter Fey <dl8fcl@darc.de>

- update to version 4.0_git20200430
  Latest commit included 6b597236de538e323dd380e655dc3f03c2afb8be
  * Bug fixes #221, #222, #223, #224, #227

-------------------------------------------------------------------
Mon Apr 20 19:41:33 UTC 2020 - Walter Fey <dl8fcl@darc.de>

- update to version 4.0_git20200420
  Latest commit included a7b28a63d4ae7d094680f89d872ce0146b7d40f8
  ft991 changes to work with gpredict

-------------------------------------------------------------------
Sat Apr 18 18:22:22 UTC 2020 - Walter Fey <dl8fcl@darc.de>

- update to version 4.0_git20200418
  Latest commit included da06f7c4d5342681d77108910edac63189d36d5f

-------------------------------------------------------------------
Tue Apr 14 20:11:47 UTC 2020 - Walter Fey <dl8fcl@darc.de>

- update to version 4.0_git20200414
  Latest commit included c50f26232b7df421835ec94bf0aa9c5078a86f07
  * Fix for Hilberling PT8000A
  * Improvements for Kenwood rigs

-------------------------------------------------------------------
Sun Apr 12 07:09:12 UTC 2020 - Walter Fey <dl8fcl@darc.de>

- update to version 4.0_git20200411
  Latest commit included 5251326d3c7e8f04ea4956659ed24e6465677bac
  * New Model Hilberling PT8000A...emulates a TS-480
  * Documentation updates
  * Bug fixes and improvements

-------------------------------------------------------------------
Thu Apr  9 17:57:32 UTC 2020 - Walter Fey <dl8fcl@darc.de>

- update to version 4.0_git20200408
  Latest commit included 6269bc4dec25648b99997684572587d768a58cea
  * Add experimental network serial mode for network-based serial interfaces
  * Bug fixes and improvements

-------------------------------------------------------------------
Wed Apr  1 20:25:21 UTC 2020 - Walter Fey <dl8fcl@darc.de>

- update to version 4.0_git20200401
  Latest commit included ee87d5e6df316815bd22b96e17da47a8433d4119

-----------------------------------------------------------------
Fri Mar 13 19:34:27 UTC 2020 - Walter Fey <dl8fcl@darc.de>

- update to version 4.0_git20200312
  Latest commit included 3bb6dc7471d96934177059f11ddc6776d8c5e67e
  * some bug fixes and improvements

-------------------------------------------------------------------
Tue Mar 10 05:53:14 UTC 2020 - Walter Fey <dl8fcl@darc.de>

- update to version 4.0_git20200310
  Latest commit ef36c7d9606e561c65cfd633109c02de392fda62
  * a lot of bug fixes and improvements
  * rig model numbers changed
-------------------------------------------------------------------
Sat Feb 15 08:31:02 UTC 2020 - Walter Fey <dl8fcl@darc.de>

- update to version 4.0_git20200213
  additional error checking for extended operations

-------------------------------------------------------------------
Wed Feb 12 22:49:44 UTC 2020 - Walter Fey <dl8fcl@darc.de>

- update to version 4.0_git20200211
  Add g/set_ext_func() to API

-------------------------------------------------------------------
Sat Feb  8 09:47:20 UTC 2020 - Walter Fey <dl8fcl@darc.de>

- update to version 4.0_git20200207
  Add get_dcd to swg bindings
  Fix get_ant for bindings
  Make icom set_ant do a 2-step process to set rx option first, then set antenna
  typo fix
  ICOM Voice Keyer implemented.
  Fix Icom get_ant to use 0x12 without option to ask for specific antenna
  Fix rig_get_ant to use bit settings
  Update icom priv_data entries to standardize them
  remove ant_count from icom_rig_init..causes segfault
  Add some antenna info to Icom README
  Removed debug
  Standardize Icom version numbers
  Add antack_len and ant_count to all Icom rigs that have get/set_ant
  Remove get_anant_count as 7851 does not have ability to determine # of antennas
  Bump up priv_cap->ant_count before calling rig_get_ant
  Changed y command to now use mandatory antenna argument
  Fix antenna count in icom.c
  Add ant_count to icom.h
  Changes to get antenna calls working in rigctld
  Change icom_get_usb_echo_off to use 0x03 instead of 0x19
  Remove const from priv_caps in icom rig backends
  Change ic785x priv_caps to non-const
  Change port for ampctl to 4531 to match other code
  Fix get_ant/set_ant commands to work with 1 or 2 byte responses in icom rigs
  Simplify closing of device files
  Improved get PTT state handling in dummy backend
  Remove duplication across GPIO and GPION handling of PTT and DCD
  Fixed erroneous messages in rig_close with GPIO(N) PTT or DCD types
  Update i/o functions to support GPIO(N) port closure
  Report unrecognised PTT and DCD types in rigctl and rigctld
  Made PTT and DCD options consistent between rigctl and rigctld
  Remove noisy debug from misc.c -- showed up rigctld -l for some odd reason
  Fix rig dependency in src/Makefile.am
  Fix cppcheck warnings
  -ldl linking when --disable-winradio is used
  Fix DLL warning on debug.c
  ic746.c: add ic746pro_set_channel() to load memory from csv
  ic746.c: correct chanbuf length, fix channel structure and support split
  Add CM108, GPIO, and GPION to rigctl.1 man page
  Remove unused var in netrigctl.c
  Change get_ant to add another option for icom rigs (and others if needed)
  restore get_powerstat
  New custom parm implementations
  tests/{memcsv.c,memsave.c}: partially revert commit 4072f9f4

-------------------------------------------------------------------
Tue Jan 21 08:21:42 UTC 2020 - Walter Fey <dl8fcl@darc.de>

- update to version 4.0_git20200121
  Remove duplicate initializer
  export dump_hex for DLL linkage
  Fix lua bindings for 64-bit compilation Tested on swig 4.0.1 and lua 5.3.5
  Update comment on rig_mem_count
  Increase FT900 POST_WRITE_DELAY to 50ms

-------------------------------------------------------------------
Sun Jan 19 15:41:41 UTC 2020 - Walter Fey <dl8fcl@darc.de>

- update to version 4.0_git20200118
  Restore rig_mem_count used by rig.swg
  Merge branch 'master' of https://github.com/Hamlib/Hamlib
  Fix ic746pro_get_channel and buffer overflow Add channel_desc to dump_csv and dump_xml
  Update NEWS
  Fix 'make distcheck' failure
  Remove double free from flrig.c
  Move winradio to new structure
  Directory migration to new layout
  Add icom_rig_open/close to all icom rigs
  Bump ICR9500 version
  Add ICR9500_STR_CAL

-------------------------------------------------------------------
Sat Jan 18 09:00:52 UTC 2020 - Walter Fey <dl8fcl@darc.de>

- update to version 4.0_git20200116
  cppcheck v1.9 clean bill of health now cppcheck.sh script added 
  Fix cppcheck warnings
  Remove commenct in microham.c
  Fix mingw32 build
  Move hist_dir_stat
  Add C4FM and AMN to Yaesu newcat.c
  Add C4FM mode for Yaesu FT-991
  Add other half of TS TS50 id and correct spelling mistake
  Clean up HAVE_LIBREADLINE mods
  Fix the ID for TS50
  Add ID for TS-50S
  Fix unused code in ft857.c found by cppcheck
  Fix unneeded code found by cppcheck in vx1700.c
  Fix dead code found by cppcheck in vr5000.c
  Fix error returns found by cppcheck in newcat.c
  Fix dead code found by cppcheck in ft990.c
  Fix dead code found by cppcheck in ft980.c
  Fix error check found by cppcheck in ft900.c
  Fix var scope found by cppcheck in ft897.c
  Fix error check found by cppcheck in ft890.c
  Fix case statement for FM found by cppcheck in winradio.c
  Fix alinco data and data_len logic
  Remove unused miniVNA directory and files
  Add uh_wkey_close to microham.h
  Attempt to fix ic7851 and ic9700 power up
  detecting echo change during icom_one_transaction
  Fix segfault in ft600.c

-------------------------------------------------------------------
Mon Jan 13 09:02:31 UTC 2020 - Walter Fey <dl8fcl@darc.de>

- update to version 4.0_git20200111a
  icom.c can now power up icom rigs and determine USB echo status

-------------------------------------------------------------------
Sat Jan 11 08:42:12 UTC 2020 - Walter Fey <dl8fcl@darc.de>

- update to version 4.0_git20200111
  Add sleep.h to src/Makefile.am
  Make rig2icom_mode handle PKT modes
  Add old path for 2003 Visual C++ as comment
  Fix mingw32 DLL linkage of hl_sleep
  Fix icom set of filter with in data mode
  Possible fix for mingw Win32 dll linking of nanosleep
  Change width to add 1 for icom rigs that need datamode filter width
  Hopefully fixed dll build and usleep linking
  Fix icom2rig_mode to allow PKT modees
  Bump version in k2.c as usleep change may effect it
  Bump version in k3.c
  Replace all usleep with hl_usleep Several places where usleep max value could
  be overflowed New hl_usleep can take values > 1000000
  Fix filter setting for datamode in icom.c
  Enclose sleep replacement in HAVE_NANOSLEEP
  Fix ic7610 ctrl-m problem
  Fix debug statement in dttsp.c
  Add check for float size and fix cppcheck warning in dttsp.c
  Move time.h include to sleep.c
  Fix mingw32 warning in ft991.c
  Fix retval warning in icom.c
  Fix cppcheck warnings
  Replace sleep macros with hamlib custom functions
  Fix icom_set_mode_with_data for IC7610 and IC7300 Fix max baud rate for IC7610
  Bump IC7610 to BETA status
  Fix ft991.c set_split_mode
  Add icom_rig_open to ic706.c rigs
  Change open logic in icom.c to check all rigs for USB echo and turn on if able to
  Remove debug from rigctl_parse.c
  Fix compile warnings in rigctl.c and rigctl_parse.c

-------------------------------------------------------------------
Sat Jan  4 23:03:47 UTC 2020 - Walter Fey <dl8fcl@darc.de>

- update to version 4.0_git20200104
  Fix mingw warning on parallel.c
  Readding rigctld.c accidental removal
  Fix mingw32 compilation of usb_port.c
  Remove hl_sleep.h as no longer needed
  Fix sleep macros and newcat.c set_powerstat
  Fix potential segfault in g313-posix.c
  Fix boolean logic error in ft1000d.c
  boolean error in ft990.c
  TS-690: bump version
  TS-690 does not implement the GT command to get/set AGC rate
  TS-690 does not implement the PC command to get/set output power level
  TS-690: deal with optional tone board using TS-450 logic
  Add set_powerstat 1 to Yaesu rig_open
  Pretty up sleep macros
  Add sleep and usleep macros so all sleeps use nanosleep
  Make icom.c try power on when can't get freq during open
  Fix barrett strtok to be thread safe
  Fix newcat.c get_mode MD=1=LSB, MD=2=USB
  Fix memory leak in rigctld and cleanup debug
  Missed semicolon
  Fix fd leak with fsockout
  Fix clang warnings
  Fix powerstat loop for icom
  icom powerstat debug added
  Another attempt to get icom powerstat working
  Add rx_range example
  Fix icom debug msg for powerstat
  Fix compilation error
  Fix compile warnings
  Remove Recommend statment from rigctl.c
  Fix cppcheck warnings
  Handling more errors on icom powerstat

-------------------------------------------------------------------
Fri Dec 20 08:16:52 UTC 2019 - Walter Fey <dl8fcl@darc.de>

- update to version 4.0_git20191219
  Allow IC-7410 to send cw messages

-------------------------------------------------------------------
Wed Dec 11 19:59:07 UTC 2019 - Walter Fey <dl8fcl@darc.de>

- update to version 4.0_git20191211
  Distribute and install new amplifier man pages
  Change ampctld default TCP port to 4531
  Minor man page updates
  New ampctld manual page
  Minor updates to rigctld manual page
  New manual page for ampctl
  Minor rigctl man page updates
  Merge remote-tracking branch 'Hamlib/master'
  Prepare for D-STAR implementation

-------------------------------------------------------------------
Sat Dec  7 18:34:55 UTC 2019 - Walter Fey <dl8fcl@darc.de>

- update to version 4.0_git20191207
  Fix compile warnings in elad.c
  Fix cppcheck warnings
  remove elad_close from flexradio
  Remove kpa1500_int as redundant and clean up cppcheck warnings
  Block the correct function in adat.c
  Remove two unused functions from adat.c and adat.h
  Update icom backend version
  Fix hash sort comparison for models
  Fix FILE* leak in test7400ADC.c
  Fix FILE* leak in readADC.c
  Fix uninitialize waqrning in parallel.c
  Fix double free in microtune_eval_board.cc
  More changes/debug to get split behaving for icom.c
  Minor change to rigctl_parse.c for ASCII print
  Change behavior of 'w' command in rigctld for binary commands.
  change retry and timeout for netrigctl to allow binary cmds from
    w command to work

-------------------------------------------------------------------
Fri Dec  6 14:07:32 UTC 2019 - Walter Fey <dl8fcl@darc.de>

- update to version 4.0_git20191206
  Add priv vfo settings to icom_set_split
  Fix icom_get_split_vfos for Main/Sub on SATMODE rigs
  Fix icom_get_split_vfos for Main/Sub on SATMODE rigs
  Fix Icom DCS SQL funnctions
  IC910 was doing TX=VFOB RX=VFOA Need to make allowances for
    Main/Sub split commands eventually
  Fix mingw64 build for g313-win.c

-------------------------------------------------------------------
Wed Dec  4 16:19:44 UTC 2019 - Walter Fey <dl8fcl@darc.de>

-  update to version 4.0_git20191204
   Reorder RIG_VFO entries and add RIG_VFO_MAIN_A and RIG_VFO_MAIN_B
     in preparation for other changes.
   Add vfo priv fields to icom.h in preparation for other changes
   Fix icom.c --vfo mode for set_freq to set the correct VFO
   In icom.c when split is turned off reset to either VFOA or Main
     as the vfo asks for
   icom.c fix spelling error
   Fix icom.c debug and --setvfo get freq
   Added a dummy snprintf to rig_debug to allow gcc to check format strings
   Change all __FUNCTION__ to __func_
   astyle all files
    Fix rigctld for win32 build
   Change %z to %d with casts for portability
   Fix tmd710 uninitialized tmd710_mode
   Remove commented line from kenwood.c
   Ensure all Icom rigs have their own BACKEND version
   Fix compile warnings for MinGW on Debian Stretch
   Fix thd73.c rig_strlevel
   Fix compile wanring in ft900.c
   Fix for 9700 and such for RIT=0 as they don't have XIT
   Remove debug from rigctlcom.c
   Update icom version and add some debug
   Add some error checking to flrig.c
   Fix icom.c to not set XIT on non-XIT rigs
   Fix typo ugly commit in icom.c
   Fix compile warning on strncat in flrig.c
   Add MainA, MainB, SubA, and SubB vfo choices for icom rigs with SATMODE
   Add icom SATMODE rigs ability to set_vfo for MainA/B and SubA/B
   Add PKT mode translations to rigctlcom
   Fix ic7300 VFOs and sprintflst to be more generic
   Update ic7300 version
   Add Main/Sub to ic821h
   Add az and el offset to rotctl & rotctld
   Add retry to rigctl open
   Add some more FLRig modes
   Update flrig version
   Fix compile warnings on termios.c
   Remove GNU Texinfo dependency

-------------------------------------------------------------------
Thu Nov 28 17:48:10 UTC 2019 - Walter Fey <dl8fcl@darc.de>

- update to version 4.0_git20191127
  Change Icom VFO checks to macros and allow for newer rigs with both
    VFO A/B and Main/Sub
  Change strtok in flrig to strtok_r
  astyle flrig.c
  Fix segfault in flrig.c due to 64-bit mode conversion - was causing
    segfault on 32-bit systems

-------------------------------------------------------------------
Mon Nov 25 19:42:40 UTC 2019 - Walter Fey <dl8fcl@darc.de>

- update to version 4.0_git20191125
  removed the code that breaks the 'f' function (icm Mike)

-------------------------------------------------------------------
Sun Nov 24 19:11:41 UTC 2019 - Walter Fey <dl8fcl@darc.de>

- update to version 4.0_git20191124
  Astyle gs232 files
  Fixes go gs232 rotors
  Fix rotctl C command
  Add south_zero option to token.h, rotator.c, rotator.h, rot_conf.c
    Tested with LX200 & Autostar
  Add SATMODE to icom.c

-------------------------------------------------------------------
Sat Nov 23 09:03:19 UTC 2019 - Walter Fey <dl8fcl@darc.de>

- update to version 4.0_git20191122
  assure that changes of last commit are packed to source file

-------------------------------------------------------------------
Wed Nov 20 20:28:54 UTC 2019 - Walter Fey <dl8fcl@darc.de>

- update to version 4.0_git20191120
  gs232 fixes
  astyle gs232a and minor debug format change
  silence some debug in misc.c
  Add function ic IC99700 and promote to stable
  ic910 and ic9100 updates
  astyle ic910 and ic9100
  Change SATMODE to generic for most icoms and specific to ic910

-------------------------------------------------------------------
Mon Nov 11 09:13:02 UTC 2019 - Walter Fey <dl8fcl@darc.de>

- update to version 4.0_git20191109
  Add Main/Sub to IC9700

-------------------------------------------------------------------
Sun Nov 10 09:35:16 UTC 2019 - Walter Fey <dl8fcl@darc.de>

- update to version 4.0_git20191108
  Enable elevation and make parsing more robuts for prosistel.c
  Fix Meade parsing and promote to stable
  astyle meade and prosistel
  Fix prosistel values hopefully
  Fix prosistel printf

-------------------------------------------------------------------
Tue Nov  5 23:47:12 UTC 2019 - Walter Fey <dl8fcl@darc.de>

- update to version 4.0_git20191104
  Fix c++ amplifier compilation
  Make C++ WIN32 compatible
  Fix mistaken commit
  Fix rigctl_parse to allow NULL in binary data
  Fix RX/TX VFO for kenwoods
  astyle dummy.c
  astyle kenwood.c kenwood.h
  Fix TX/RX VFO for get/set freq
  astyle icom.c icom.h
  Fix meade get_pos to allow high or low precision answers

-------------------------------------------------------------------
Mon Oct 14 13:54:16 UTC 2019 - Walter Fey <dl8fcl@darc.de>

- update to version 4.0_git20191012
  Fix ts480.c to expect return from RX command when not in PTT
  Fix ts480.c to expect return from RX command when PTT=true
  astyle for gs232b.c and minor changes to debug msgs
  Fix FT891 mode since it's backwards from all other Yaesu rigs
  Add FT-DX101 Beta version
  Get rid of some blank pages in manual
  Enable verbose mode in bindings/pytest.py

-------------------------------------------------------------------
Sun Sep 29 19:50:48 UTC 2019 - Walter Fey <dl8fcl@darc.de>

- update to version 4.0_git20190929
  Fix get_mode for ts50s.c to use IF

-------------------------------------------------------------------
Tue Sep 10 07:43:59 UTC 2019 - Walter Fey <dl8fcl@darc.de>

- update to version 4.0_git20190910
  Move unnecessary global and file static variables to the stack
  Simplify unnecessary persistence of extended response state
  Fix misunderstanding of netrigctl_transaction() return value
  Add some debug for flush
  Don't expect a response when none is required.
  Don't send EasyComm I commands to EasyComm II rotators.
  Fix chk_vfo response

-------------------------------------------------------------------
Tue Sep  3 18:51:13 UTC 2019 - Walter Fey <dl8fcl@darc.de>

- update to version 4.0_git20190828
  Fix flrig.c for gcc v4.9.2
  Increase pegasus timeout and retry
  Change freq & chan struct start/end to avoid colliding with LUA SWIG start/end
  Add note for LUA UUL changes
  Fix dumpmem.c channel structure
  Make code C90 compliant again
  Fix start/end names

-------------------------------------------------------------------
Fri Aug 16 14:22:54 UTC 2019 - Walter Fey <dl8fcl@darc.de>

- update to version 4.0_git20190811
  Remove old comment in k3.c
  Make rigctld_vfo_mode a stack variable for threading
  Remove unneeded debug in network_flush
  Remove redundant check in dumpcaps.c
  Fix flrig for 64-bit mode
  Adding amptest.sh
  Adding thread_local definition to rig.h
  Make rigctld thread safe for vfo_mode and ext_resp and change other
   globals to thread_local for future reference
  Restore else clause in network.c -- mistakenly removed
  Change debug level in flrig.c modeMapGetHamlib
  Add warning in rig.h for thread_local missing
  Add ampctl/ampctld to .gitignore
  Add delay to ft817 for VFO swap and promot to stable
  Mod gs232b to add CR after command with no response

-------------------------------------------------------------------
Sun Jul 21 18:36:14 UTC 2019 - Walter Fey <dl8fcl@darc.de>

- update to version 4.0_git20190720
  Fix segfault in flrig.c
  Fix mode set in flrig.c
  Add flush to flrig.c
  Add timeouts to ft1000d and promot to beta. Work with WSJT-X but
  rig split does not work yet.

-------------------------------------------------------------------
Thu Jul 11 19:23:41 UTC 2019 - Walter Fey <dl8fcl@darc.de>

- update to version 4.0_git20190711
  Correct FT; command that does not exist on the FT-891.
  Allow setting split mode without smashing the VFOB frequency.
  easycomm: Fix futile check of speed range
  Scale power values correctly for Yaesu FT-891.

-------------------------------------------------------------------
Thu Jun 27 09:09:57 UTC 2019 - Walter Fey <dl8fcl@darc.de>

- update to version 4.0_git20190627
  Ensure compilation works with a pre C11 compiler
  Adding README.elecraft
  Fixup some amplifier code
  Fix Makefile.am
  Add amp header files for distribution
  Update Windows build scripts

-------------------------------------------------------------------
Wed Jun 12 18:42:14 UTC 2019 - Walter Fey <dl8fcl@darc.de>

- update to version 4.0_git20190610
  Icom: Add missing break keyword for RIG_LEVEL_KEYSPD.
  Add LVL_KEYSPD and LVL_CWPITCH ranges for IC-9700

-------------------------------------------------------------------
Mon Jun 10 21:46:52 UTC 2019 - Walter Fey <dl8fcl@darc.de>

- update to version 4.0_git20190609
  Backup serial options on open, restore on close

-------------------------------------------------------------------
Sat Jun  8 18:35:38 UTC 2019 - Walter Fey <dl8fcl@darc.de>

- update to version 4.0_git20190607
  Icom backends: Remove RIG_FUNC_FAGC from backends that support proper AGC levels
  Fix rig_model for Elecraft KX2 and KX3

-------------------------------------------------------------------
Sun Jun  2 08:07:10 UTC 2019 - Walter Fey <dl8fcl@darc.de>

- update to version 4.0_git20190601
  Modification to backend library to suport azimuth positions to -180deg
  Updated and new GS232 backends.
  Added new models for AMSAT LVB Tracker and Fox Delta ST2
  FIX: ft600_get_freq
  Add icom_rig_open to IC9700

-------------------------------------------------------------------
Wed May 29 22:02:16 UTC 2019 - Walter Fey <dl8fcl@darc.de>

- update to version 4.0_git20190529
  Fix CM108 ptt_bitnum for pttport
  Add USB_echo_check to ic9700

-------------------------------------------------------------------
Thu May 23 07:26:44 UTC 2019 - Walter Fey <dl8fcl@fritz.box>

- update to version 4.0_git20190522
  astyle parallel.c
  Fix compile warnings in parallel.c 
  Fix compile warning in rotctl_parse.c
  Fix compile warning in rigctl_parse.c
  astyle debug.c
  Fix compiler warning in debug.c
  Fix duplicate set_vfo in ic7300.c
  Fix uninitialized in tmd710.c
  Fix vfonum warning in tmd710.c

-------------------------------------------------------------------
Thu May 16 18:24:08 UTC 2019 - Walter Fey <dl8fcl@darc.de>

- update to version 4.0_git20190515
  Promote TS790 to stable
  Add 60m exception for set_freq for FT-DX3000 and FT-DX5000
  Add debug for 60M DX3000/5000 exception

-------------------------------------------------------------------
Sun May  5 13:37:57 UTC 2019 - Walter Fey <dl8fcl@darc.de>

- update to version 4.0_git20190504
  Fix an incorrect error return value from win32_serial_select
  Fix timeout issues with the Ten-Tec Orion/Eagle

-------------------------------------------------------------------
Tue Apr 16 20:47:59 UTC 2019 - Walter Fey <dl8fcl@darc.de>

- update to version 4.0_git20190416
  Improve vfo err msgs in kenwood.c
  Fix thd72 current_vfo problem
  Improved debug in th.c
  astyle for th.c and thd72.c

-------------------------------------------------------------------
Sun Apr 14 11:12:35 UTC 2019 - Walter Fey <dl8fcl@darc.de>

- update to version 4.0_git20190412
  Remove unused static functions, array bounds, fix warnings
  Add set/get powerstat for ic785x.c 
  Have kenwood set_powerstat ON wait for get_powerstat
  Fix set_powerstat wait loop
  Add wait for set_powerstat in icom.c
  Bump version for kenwood.c
  Change powerstat to wait for get_freq as this is generic to all
  cache timeout when swapping vfos on ft817 and ft897
  Add flush to serial open
  Add set/get vfo to ft857
  Improved set_powerstat for icom & kenwood
  Add priv_caps for IC9700
  Add IC-9700 to ic7300.c

-------------------------------------------------------------------
Sat Mar 16 08:34:04 UTC 2019 - Walter Fey <dl8fcl@darc.de>

- update to version 4.0_git20190315
  Update TS590 version and make it STABLE
  Fix ts590 RIG_LEVEL_AF
  astyle ts590.c

-------------------------------------------------------------------
Fri Mar  1 16:55:17 UTC 2019 - Walter Fey <dl8fcl@darc.de>

- update to version 4.0_git20190301
  Relax chk_vfo requirement for backward compatibility
  astyle for netrigctl.c

-------------------------------------------------------------------
Tue Feb 26 18:50:49 UTC 2019 - Walter Fey <dl8fcl@darc.de>

- update to version 4.0_git20190224
  Change frequency setting for the FT-747GX to something more basic.

-------------------------------------------------------------------
Sat Feb 23 20:50:33 UTC 2019 - Walter Fey <dl8fcl@darc.de>

- update to version 4.0_git20190222
  Included MicroKeyer-III
  typo, also include NUM_UHTYPES

-------------------------------------------------------------------
Fri Feb 15 22:04:01 UTC 2019 - dl8fcl@darc.de

- update to version 4.0_git20190213
  Add ability for rigctlcom to work with Ham Radio Deluxe
  astyle format of rigctlcom.c

-------------------------------------------------------------------
Sat Feb  9 15:53:06 UTC 2019 - dl8fcl@darc.de

- update to version 4.0_git20190208
  Fix network_flush as it was not actually flushing before
  network.c astyle applied
  Add export definition for netrigctl_get_mode for DLL building

-------------------------------------------------------------------
Thu Feb  7 08:01:27 UTC 2019 - dl8fcl@darc.de

- update to version 4.0_git20190206
  Reduce verbosity in FLRig
  Ensure buf is zeroed in kenwood_safe_transaction to avoid return
    random data
  Reduce verbosity of rig_strrmode and read_string
  Improve error handling in network_flush when disconnect happens
  Reduce verbosity of rig_strvfo
  netrigctl can now do vfo mode -- has automatic detection of
    rigctld vfo mode
  Fix memset in kenwood.c

-------------------------------------------------------------------
Mon Feb  4 20:34:49 UTC 2019 - dl8fcl@darc.de

- update to version 4.0_git20190204
  Remove unnecessary delays from TS-990 and TS-2000 back ends

-------------------------------------------------------------------
Wed Jan 30 17:16:51 UTC 2019 - dl8fcl@darc.de

- update to version 4.0_git20190129
  Add FT847UNI for early serial number units that are one-way comm

-------------------------------------------------------------------
Thu Jan 24 08:18:42 UTC 2019 - dl8fcl@darc.de

- update to version 4.0_git20190123
  New model Kenwood TH-D74
  fix buffer lengths to avoid gcc8 warnings

-------------------------------------------------------------------
Tue Jan 22 10:40:24 UTC 2019 - dl8fcl@darc.de

- update to version 4.0_git20190121
  New utility 'rigctlcom' to allow non-hamlib-aware programs to use
  hamlib rigs via COM ports.
  Add TUNER on/off function for Yaesu rigs.

-------------------------------------------------------------------
Fri Jan 11 08:21:27 UTC 2019 - dl8fcl@darc.de

- update to version 4.0_git20190111
  Fix kenwood BC BC2 return

-------------------------------------------------------------------
Thu Jan 10 20:51:53 UTC 2019 - dl8fcl@darc.de

- update to version 4.0_git20190109
  Automatically detect CI-V echo state

-------------------------------------------------------------------
Wed Jan  2 06:50:57 UTC 2019 - dl8fcl@darc.de

- update to version 4.0_git20190101
  Fix rig_idx2settings for 64-bit sprintf_list functions
  Fix flrig when WSJT-X startup causes rig mode change
  Add PKT modes to ts590.c
  Add BC2 and NB2 functions for newer kenwoods
  All kenwoods to have 3-char commands for functions and return
  whatever value the rig returns instead of 0/1

-------------------------------------------------------------------
Mon Dec 31 09:14:48 UTC 2018 - dl8fcl@darc.de

- update to version 4.0_git20181228
  Simplify SWIG interface definition and hide 64-bit values from
  Lua binding.

-------------------------------------------------------------------
Thu Dec 27 21:43:16 UTC 2018 - dl8fcl@darc.de

- update to version 4.0_git20181226
  icr30 updates

-------------------------------------------------------------------
Mon Dec 24 23:12:23 UTC 2018 - dl8fcl@darc.de

- update to version 4.0_git20181224
  Change RIG_MODE and RIG_FUNC to 64-bit values
  Add PRXll macro for 64-bit use
  Fixup for 64-bit in memcsv.c
  64 bit mods to netrigctl.c testrig.c
  Add TS-890S as derivative of TS-480 plus new modes
  Add XHCG to ic706.c
  Change rmode_t to uint64_t and remove unneeded casts
  Fix RIG_MODE structure in src/msic.c
  Fix some 64bit items and add RIG_FUNC_NB2 for TS-890S
  Suppress GCC unused-return warning
  ICR6 new functions

-------------------------------------------------------------------
Fri Dec 21 17:30:19 UTC 2018 - dl8fcl@darc.de

- update to version 4.0_git20181221
  New model Icom IC-R30

-------------------------------------------------------------------
Thu Dec 20 21:04:47 UTC 2018 - dl8fcl@darc.de

- update to version 4.0_git20181220
  Complete R6 commands
  Fix FT857 to return the SMeter-based value
  Reduce debug info in flrig.c
  Patch for Icom DCS code handling

-------------------------------------------------------------------
Mon Dec 17 21:38:52 UTC 2018 - dl8fcl@darc.de

- update to version 4.0_git20181217
  New model Icom IC-R8600

-------------------------------------------------------------------
Fri Dec 14 08:51:34 UTC 2018 - dl8fcl@darc.de

- update to version 4.0_git20181213
  Fix flrig modeMap and reduce debug levels
  Add empty dvi: target to quell distcheck error
  New iOptron rotator backend

-------------------------------------------------------------------
Fri Nov 23 20:59:04 UTC 2018 - dl8fcl@darc.de

- update to version 4.0_git20181121
  Change variable length argument handling in affected functions
  Add FT-DX3000 entry

-------------------------------------------------------------------
Thu Nov 15 17:14:41 UTC 2018 - dl8fcl@darc.de

- update to version 4.0_git20181115
  Change P command to T command to avoid EPROM burnout
  Fix ft1000d WRITE_DELAY as 175ms was unnecessary

-------------------------------------------------------------------
Fri Nov  9 20:04:31 UTC 2018 - dl8fcl@darc.de

- update to version 4.0_git20181107
  Add ability to have rigctld display transverter frequency

-------------------------------------------------------------------
Wed Nov  7 12:01:47 UTC 2018 - dl8fcl@darc.de

- update to version 4.0_git20181106
  Quell clang6 warnings

-------------------------------------------------------------------
Mon Nov  5 22:46:03 UTC 2018 - dl8fcl@darc.de

- update to version 4.0_git20181103
  Remove TARGETABLE_MODE from ft3000

-------------------------------------------------------------------
Tue Oct 30 07:34:47 UTC 2018 - dl8fcl@darc.de

- update to version 4.0_git20181029
  ft817: adding delay before next retry after returning from tx to rx
  Add FT-DX3000 definition and promote FT-DX5000 to Stable
  ft817: Moving delay value into #define section of the header

-------------------------------------------------------------------
Fri Oct 26 19:05:47 UTC 2018 - dl8fcl@darc.de

- update to version 4.0_git20181026
  Quell compiler warnings

-------------------------------------------------------------------
Thu Oct 25 22:03:05 UTC 2018 - dl8fcl@darc.de

- update to version 4.0_git20181025
  Fix multi-mode-mapping
  Ensure read_string value is terminated
  Fix icmarine duplicate read

-------------------------------------------------------------------
Tue Oct  2 20:02:56 UTC 2018 - dl8fcl@darc.de

- update to version 4.0_git20181001
  Some calls to thd72_get_menu_item where passing wrong values for range check.
  Improving reliability working with radios cloning FT817 protocol

-------------------------------------------------------------------
Sun Sep 16 21:17:55 UTC 2018 - dl8fcl@darc.de

- update to version 4.0_git20180916
  Ass support for CM108AH chipsets
  Update power reading values for FT900

-------------------------------------------------------------------
Thu Aug 30 21:06:45 UTC 2018 - dl8fcl@darc.de

- update to version 4.0_git20180830
  Change ft100 RTTY to PKTUSB for compatibility with WSJT-X

-------------------------------------------------------------------
Thu Aug 23 07:55:47 UTC 2018 - dl8fcl@darc.de

- update to version 4.0_git20180821
  ELAD FDM DUO backend added

-------------------------------------------------------------------
Sun Aug 19 17:31:22 UTC 2018 - dl8fcl@darc.de

- update to version 4.0_git20180816
  Fix kenwood SQ squelch set

-------------------------------------------------------------------
Sat Aug 11 21:58:39 UTC 2018 - dl8fcl@darc.de

- update to version 4.0_git20180809
  Fix RFPOWER level for FT-450D
  In newcat_open(), initialize rig_id if a subsequent command need it

-------------------------------------------------------------------
Tue Aug  7 19:27:17 UTC 2018 - dl8fcl@darc.de

- update to version 4.0_git20180806
  including all changes for release 3.3

-------------------------------------------------------------------
Thu Aug  2 21:16:33 UTC 2018 - dl8fcl@darc.de

- update to version 3.3_git20180802
  man pages updated

-------------------------------------------------------------------
Tue Jul 17 15:14:20 UTC 2018 - dl8fcl@darc.de

- update to version 3.3_git20180717
  Fixes for the piHPSDR backend
  Force back to split after set_vfo A if needed,
  Fixes split getting turned off

-------------------------------------------------------------------
Tue Jun 26 20:31:26 UTC 2018 - dl8fcl@darc.de

- update to version 3.3_git20180625
  Really fix TS590S/SG RIG_LEVEL_STRENGTH

-------------------------------------------------------------------
Sat Jun 23 22:06:03 UTC 2018 - dl8fcl@darc.de

- update to version 3.3_git20180622
  Fix TS590S/SG RIG_STRENGTH readings
  Add RAWSTR to ts590
  Changes to remove unnecessary VFO swaps

-------------------------------------------------------------------
Tue May 29 06:38:24 UTC 2018 - dl8fcl@darc.de

- update to version 3.3_git20180525
  Fix netrigctl.c returning wrong value

-------------------------------------------------------------------
Thu May 24 19:10:49 UTC 2018 - dl8fcl@darc.de

- update to version 3.3_git20180524
  Improve network connect error message
  Add debug time stamps via -Z and --debug-time-stamps
  Reverse bad patch for Android
  Adding correct get/set functions for LNA- Mixer- IF gain of the FuncubePro+
  Fix compile warnings
  Fix TenTec OmniVII get_mode for VFOB
  Fix -Z option on rigctld
  Update man pages for content and conformance
  Move utility man page files to doc/man1
  Add PKTAM PKTFM modes to ic7300
  Fixed PKTFM filters in ic7300
  Added TRXManager backend
  WIP: thd72 driver
  Allow rigctld to continue operating after tcp or serial rig disappears
  Fix read_string terminator length parameters
  Fix modes on trxmanager
  Implement some more interfaces. Comment out get_chan_all_cb because
  FLRig thread safety improved and now works WSJT-X split mode with multiple connections
  Added functionality for the IC-7300 auto antenna tuner
  flrig improvements to minimize relay chattering

-------------------------------------------------------------------
Wed Mar 28 19:48:08 UTC 2018 - dl8fcl@darc.de

- update to version 3.3_git20180327
  Allow rigctld to reopen after error

-------------------------------------------------------------------
Sat Mar 24 16:52:34 UTC 2018 - dl8fcl@darc.de

- update to version 3.3_git20180323
  Create HTML manual at 'make dist' time

-------------------------------------------------------------------
Tue Mar 20 20:13:50 UTC 2018 - dl8fcl@darc.de

- update to version 3.3_git20180319
  Update AOR 3030 to actually work now. Tested with WSJT-X

-------------------------------------------------------------------
Mon Mar 19 21:43:22 UTC 2018 - dl8fcl@darc.de

- update to version 3.3_git20180317
  Remove incorrectly included file

-------------------------------------------------------------------
Fri Mar 16 20:41:31 UTC 2018 - dl8fcl@darc.de

- update to version 3.3_git20180316
  IC-7300: Enable get_split_vfo and remove rptr_shift/rptr_offs,
  which are not supported.
  Fix kenwood.c to compile with MinGW

-------------------------------------------------------------------
Wed Mar 14 22:10:19 UTC 2018 - dl8fcl@darc.de

- update to version 3.3_git20180313
  Fix K3 send_morse and change generic to 0x20 padding per manual
  Fix morse send of a single space

-------------------------------------------------------------------
Tue Mar 13 23:04:55 UTC 2018 - dl8fcl@darc.de

- update to version 3.3_git20180311
  FT-817 status queries honour retries and timeout

-------------------------------------------------------------------
Thu Mar  8 00:19:50 UTC 2018 - dl8fcl@darc.de

- update to version 3.3_git20180307
  Add Rohde&Schwarz xk2100 backend for W1AW

-------------------------------------------------------------------
Sat Mar  3 21:33:01 UTC 2018 - dl8fcl@darc.de

- update to version 3.3_git20180302
  including all changes for release 3.2

-------------------------------------------------------------------
Fri Feb 23 20:59:33 UTC 2018 - dl8fcl@darc.de

- update to version 3.2_git20180223
  Fix IC-7000 RIG_OP_TUNE command
  Fix bug in vfo_comp calculation in Hamlib

-------------------------------------------------------------------
Mon Feb 19 22:55:53 UTC 2018 - dl8fcl@darc.de

- update to version 3.2_git20180219
  Addition of support for CM108B PTT

-------------------------------------------------------------------
Sun Jan 28 22:04:14 UTC 2018 - dl8fcl@darc.de

- update to version 3.2_git20180128
  Switching from sprintf to snprintf to avoid possible seqfaults,
  Workaround for fldigi

-------------------------------------------------------------------
Wed Jan 24 12:05:54 UTC 2018 - dl8fcl@darc.de

- update to version 3.2_git20180121
- IC-7300: Fix issues in Icom civ_version 1 parameters implementations
- Add an option to output static values for RIG_LEVEL_STRENGTH and
  RIG_LEVEL_RAWSTR

-------------------------------------------------------------------
Thu Jan 18 20:00:22 UTC 2018 - dl8fcl@darc.de

- update to version 3.2_git20180118
  Fix for TS-711 and TS-811

-------------------------------------------------------------------
Mon Jan 15 20:36:46 UTC 2018 - dl8fcl@darc.de

- update to version 3.2_git20180114
  Add IC-7610

-------------------------------------------------------------------
Mon Dec 25 23:19:50 UTC 2017 - dl8fcl@darc.de

- update to version 3.2_git20171225
  Add --without-libusb option to configure script
  Fix IC-7300 S-meter calibration table length
  Add Flex 6400/6600
  Add 60m band for all 3 IARU regions and 4m band for region 1. IC-7300…
  Fix IC-7300 S-meter calibration table length

-------------------------------------------------------------------
Sat Oct 28 18:46:10 UTC 2017 - dl8fcl@darc.de

- update to version 3.2_git20171008
  Modified coding style to Allman
  Formatted src/ to final coding guidelines

-------------------------------------------------------------------
Tue Sep 26 21:13:47 UTC 2017 - dl8fcl@darc.de

- update to version 3.2_git20170912
  Changes to make microHam support compile under MinGW

-------------------------------------------------------------------
Mon Sep 11 19:42:01 UTC 2017 - dl8fcl@darc.de

- update to version 3.2_git20170911
  Microham support. Use "uh-rig" for rig_pathname to talk to the
  microHam device for CAT.
  IC 7100, set_powerstat = icom_set_powerstat
  Fix serial_port DCD squelch

-------------------------------------------------------------------
Tue Sep  5 17:41:29 UTC 2017 - dl8fcl@darc.de

- update to version 3.2_git20170903
  Fix hardcoded pcconfig libdir

-------------------------------------------------------------------
Sun Aug 13 14:38:41 UTC 2017 - dl8fcl@darc.de

- update to version 3.2_git20170812
  Add best guess transmit status to rig state structure
  Take out unecessary delays in K(X)3(S) back end

-------------------------------------------------------------------
Tue Aug  8 21:19:07 UTC 2017 - dl8fcl@darc.de

- update to version 3.2_git20170803
  Fix off-by-one issue in reading memory mode from IF command response
  Fix some issues with commands not supported by TS-2000 CAT emulations

-------------------------------------------------------------------
Fri Jul 28 17:53:09 UTC 2017 - dl8fcl@darc.de

- update to version 3.2_git20170728
  Update ax_python_devel.m4 macro
  Bindings tweaks for Python and TCL
  Fix TCL script test target--check-tcl
  Apply silent rule variables to Python
  Apply silent rules to Perl to the extent possible
  Apply silent rules to LUA
  Rename autogen.sh to bootstrap to follow GNU guidelines
  Install certain top level files into docdir

-------------------------------------------------------------------
Thu Jul 20 22:00:27 UTC 2017 - dl8fcl@darc.de

- update to version 3.2_git20170720
  IC-M710 now working with WSJST-X
  Initial Python3 build steps and test script
  Add icm710.h to icmarine Makefile.am

-------------------------------------------------------------------
Sun Jul 16 19:47:19 UTC 2017 - dl8fcl@darc.de

- update to version 3.2_git20170716
  Use snprintf throughout kenwood/kenwood.c for buffer safety

-------------------------------------------------------------------
Tue Jul 11 10:29:39 UTC 2017 - dl8fcl@darc.de

- update to version 3.2_git20170710
  Fix FLRig segfault and strlen cast

-------------------------------------------------------------------
Sun Jul  9 03:22:49 UTC 2017 - dl8fcl@darc.de

- update to version 3.2_git20170708
  Add FLRig backend
  netrigctld enabled to trigger two different CAT commands (Mic or Data)

-------------------------------------------------------------------
Fri Jul  7 01:42:45 UTC 2017 - dl8fcl@darc.de

- update to version 3.2_git20170704
  Add Barrett 2050 backend

-------------------------------------------------------------------
Thu Jun 29 00:57:12 UTC 2017 - dl8fcl@darc.de

- update to version 3.2_git20170628
  Fix FT-891/991 behavior with WSJT-X
  Fixed indentation warnings detected by newer gcc

-------------------------------------------------------------------
Sun Jun 18 05:00:08 UTC 2017 - dl8fcl@darc.de

- update to version 3.2_git20170530
  Initial controls for the rs-hfiq sdr
  Do not set DTR/RTS on dedicated PTT port if it is already closed

-------------------------------------------------------------------
Tue May 30 22:54:25 UTC 2017 - dl8fcl@darc.de

- update to version 3.2_git20170530
  Initial controls for the rs-hfiq sdr
  Do not set DTR/RTS on dedicated PTT port if it is already closed

-------------------------------------------------------------------
Tue May 30 09:36:24 UTC 2017 - dl8fcl@darc.de

- update to version 3.2_git20170523
  Fixes for kenwood backends
  Stop rigctld and rotctld crashing when service threads cannot
  write to clients
  New rotator model: SPID MD-01/02 in ROT2 mode
  fixed reading the rig's return value in newcat_get_tx_vfo

-------------------------------------------------------------------
Thu May 11 19:52:49 UTC 2017 - dl8fcl@darc.de

- update to version 3.2_git20170511
  Icom IC-R10 & 20 move to beta

-------------------------------------------------------------------
Fri Apr  7 20:16:50 UTC 2017 - dl8fcl@darc.de

- update to version 3.2_git20170406
  New model: Icom IC-R6
  Allow RIG_LEVEL_STRENGTH queries over the network link

-------------------------------------------------------------------
Sun Mar  5 17:33:38 UTC 2017 - dl8fcl@darc.de

- update to version 3.2_git20170227
  Fix a state machine defect with repeated PTT reset calls
  Add Dorji DRA818 modules (VHF and UHF variants)

-------------------------------------------------------------------
Sun Feb 19 19:54:09 UTC 2017 - dl8fcl@darc.de

- update to version 3.2_git20170219
  Fix some endian issues in the si570/AVR SDR back ends
  Added x108g backend
  Fix FT-891 recognition
  Breakout FT-1000D file for full support
  Fix DIG MODE for FT817-ND
  Add support for AGC Levels

-------------------------------------------------------------------
Sat Jan 28 15:52:06 UTC 2017 - dl8fcl@darc.de

- update to version 3.2_git20170127
  Added HPSDR backend
  Fix ic785x default addr to 0x8e
  Clears potential garbage data in read buffer prior to command being sent
  Updated PiHPSDR backend defaults
  Use Windows ioctlsocket to avoid buffer overrun
  Add get and set split functions for the TS450S
  Simplify and fix defects in the FT991 back end
  Added HPSDR backend

-------------------------------------------------------------------
Sat Jan  7 22:57:26 UTC 2017 - dl8fcl@darc.de

- update to version 3.2_git20170107
  Fix ft991_get_mode
  New models: IC-7849/IC-7851, FT-891

-------------------------------------------------------------------
Sun Dec 25 21:25:19 UTC 2016 - dl8fcl@t-online.de

- update to version 3.2_git20161225
  Fix typos
  Corrected a few bugs and rebased from Ervin's (HA2OS) pull request.
  Added new example to Python demo script (set/get float type level)
  Added Lua binding and demo script
  Adds test for ID 907 for the Flex 6300
  python-binding and lua-binding enabled

-------------------------------------------------------------------
Sat Nov 19 20:17:36 UTC 2016 - dl8fcl@t-online.de

- update to version 3.1_git20161119
  Move K3 DT0 before mode switch, add version info to electraft rig open,
  WSJT-X VOX rig split now works

-------------------------------------------------------------------
Tue Nov  8 23:31:48 UTC 2016 - dl8fcl@t-online.de

- update to version 3.1_git20161106
  New Perseus model
  Fixed buffer overflow in rigctl_parse and rotctl_parse 
  Changed some modules to LGPL in lieu of GPL
  Change the IC7600 & IC7800 set/get mode to versions that support DATA…
  fix set_vfo behavior of TS2000
  fix NET rigctl

-------------------------------------------------------------------
Mon Sep  5 11:06:40 UTC 2016 - dl8fcl@t-online.de

- update to version 3.1_git20160904
  xg3: fix buffer overflow
  Fix issue with TS-570S|D open in rig_caps
  Release the serial port used for PTT when possible

-------------------------------------------------------------------
Sat Aug 27 18:04:35 UTC 2016 - dl8fcl@t-online.de

- update to version 3.1_git20160827
  Fix an issue presenting on the Yaesu FT-450(D)
  Fix issue with TS-570S|D open in rig_caps
  Updated smeter calibration for ic7300

-------------------------------------------------------------------
Sun Jun 12 12:27:02 UTC 2016 - dl8fcl@t-online.de

- update to version 3.1_git20160611
  implemented set_conf, get_conf and Token fast_set_commands for max
  throughput
  Yaesu Fast Set Commands (High throughput for commands)
  added send_morse and civ_version to ic7100/ic7600
  added get/set_conf for FT1200, FT2000, FT450, FT5000 and FT9000
  Fixed SCAN_STOP for all rigs and implmented it plus SCOPE for ic7300
  Changes for IC-7300 and IC-7200

-------------------------------------------------------------------
Mon May 23 17:19:05 UTC 2016 - dl8fcl@t-online.de

- update to version 3.1_git20160521
  Do not attempt to query AI state on several Kenwood rigs
  Add some functionality to the tmd710
  Add send_morse to icom rigs
  Do not crash if expected CTCSS tones not sepcified
  Add RIG_PASSBAND_NOCHANGE as possible set_{split_,split_freq_,}mode a… 
  Initial support for the IC-7300

-------------------------------------------------------------------
Mon Apr  4 19:53:24 UTC 2016 - dl8fcl@t-online.de

- update to version 3.1_git20160402
  Added support for Icom IC-2730
  Use rig state rig port retry option rather than from capabilities
  Use a sensible port timeout value for the Kenwood TS-850
  Make sure right band is used when setting frequency on IC-910(H)
  VFO targetable get frequency operation for the Icom IC-910(h)
  Better set frequency semantics for the IC-910(h)
  Do not swap VFO unnecessarily
  Elide unnecessary CAT commands when setting split frequency and mode
  Add {get,set}_splitfrequency_mode for the IC-910(H)
  Implement rig_{set,get}_split_freq_mode() for IC-756 series.
  Initial implementation of rig_{set,get}_split_freq_mode() for FT-857.
  Implement combined split VFO frequency and mode setting. 
  Fixed get_vfo for FT-757GX(II)
  Allow the ft757gx to work with WSJT-X
  Add 23cms to IC-910(H) backend
  Improve IPv6 portability and consistency
  Various Yaesu updates
  Add get_freq to FRG-100
  Favor $HOME over '~' in text
  Fix a logic error in band detection during IC-910 set frequency
  Merge branch 'ic910-set-freq' of git://git.code.sf.net/u/bsomervi/hamlib

-------------------------------------------------------------------
Sat Jan 16 23:28:33 UTC 2016 - dl8fcl@t-online.de

- update to version 3.1_git20160115
  Fix possible frequency overflow on Kenwood and Yaesu
  Install daemon man files to man1
  New Prosistel rotor backend from IZ7CRX
  Fix missing PKTUSB mode setting code for FT-817 & FT-897

-------------------------------------------------------------------
Fri Dec 11 19:53:13 UTC 2015 - dl8fcl@darc.de

- update to version 3.1_git20151207
  Fix FT-817/857/897 issues and add some missing functionality
  Use correct function to execute set type commands with no response
  Add a new command line option '--no-restore-ai' ('-n') to rigctl
  Allow for poor emulations of Kenwood rigs that have no ID command
  Attempt to restore AI status on exit
  Proper IPv6 and dual stack networking

-------------------------------------------------------------------
Sun Nov 22 00:15:46 UTC 2015 - dl8fcl@t-online.de

- update to version 3.1_git20151122
  Remove unecessary delays from TS-940S backend

-------------------------------------------------------------------
Mon Nov  9 22:18:29 UTC 2015 - dl8fcl@darc.de

- update to version 3.1_git20151109
  change command validation for Yaesu set commands

-------------------------------------------------------------------
Sun Sep 20 21:35:34 UTC 2015 - dl8fcl@darc.de

- update to version 3.1_git20150920
  fix kenwood_set_mode for ts590s and mode CW, RTTY or AM

-------------------------------------------------------------------
Thu Sep  3 22:36:46 UTC 2015 - dl8fcl@darc.de

- update to version 3.0_git20150903
  Add library paths for tests

-------------------------------------------------------------------
Sat Aug 22 23:26:00 UTC 2015 - dl8fcl@darc.de

- update to version 3.0_git20150822
  New CNCTRK rotor backend

-------------------------------------------------------------------
Mon Aug 17 23:13:06 UTC 2015 - dl8fcl@darc.de

- update to version 3.0_git20150815
  Fixes power level reporting for the Omni VII. Backend is 
  promoted to STABLE status.
  Fixes S meter reporting for FT857 and FT991.
  Fixes rig split for FT991. Working now for WSJT-X rig split mode.

-------------------------------------------------------------------
Mon Jul 27 11:21:42 UTC 2015 - dl8fcl@darc.de

- update to version 3.0_git20150727
  Allows the FT-991 to work with Fake Split in WSJT-X

-------------------------------------------------------------------
Fri Jul 17 11:29:07 UTC 2015 - dl8fcl@darc.de

- update to version 3.0_git20150717
  Fix for Yaesu FT-991

-------------------------------------------------------------------
Fri Jul  3 23:00:42 UTC 2015 - dl8fcl@darc.de

- update to version 3.0_git20150703
  Omni VII patch for WSJT-X

-----------------------------------------------------------------
Sat May 23 21:30:25 UTC 2015 - dl8fcl@darc.de

- update to version 3.0_git20150523
  Omni VII set VFO_CURR correctly

-------------------------------------------------------------------
Sun Apr 26 19:38:52 UTC 2015 - dl8fcl@darc.de

- update to version 3.0_git20150425 - beta version
  with a lot of new features and new rig backends

-------------------------------------------------------------------
Fri Nov  9 00:06:33 UTC 2012 - dl8fcl@darc.de

- update to version 1.2.15.3

-------------------------------------------------------------------
Fri Feb  3 09:08:53 UTC 2012 - dl8fcl@darc.de

- update to version 1.2.15

-------------------------------------------------------------------
Sun Jul 31 20:37:44 UTC 2011 - dl8fcl@darc.de

- update to version 1.2.14

-------------------------------------------------------------------
Sun May 29 13:24:41 UTC 2011 - dl8fcl@darc.de

- update to version 1.2.13.1

-------------------------------------------------------------------
Sun Mar 13 16:29:03 UTC 2011 - dl8fcl@darc.de

- update to version 1.2.13

-------------------------------------------------------------------
Mon Sep  6 21:26:30 UTC 2010 - dl8fcl@darc.de

- update to version 1.2.12

-------------------------------------------------------------------
Mon Jun  7 17:28:17 UTC 2010 - dl8fcl@darc.de

- update to version 1.2.11
-------------------------------------------------------------------
* Tue Nov 02 2009 - dl8fcl@darc.de
- update to version 1.2.10
* Sun Mar 01 2009 - dl8fcl@darc.de
- update to version 1.2.9
* Mon Nov 03 2008 - dl8fcl@darc.de
- update to version 1.2.8
- disabled src_misc_c_strcmp.diff
* Sun Jul 22 2007 - dl9pf@gmx.de
- version 1.2.6.2
* Wed Feb 20 2007 - dl9pf@gmx.de
- import into buildservice
- version 1.2.6
* Tue Jun 20 2006 Tim Fischer
- rewrite spec file for SUSE 10.1
* Tue Sep 26 2004 Stephane Fillod
- New backends: skanti, racal, wj, tuner
- New command 'rigswr'
* Tue Jan 20 2004 Tomi Manninen
- Fix for 1.1.5pre2
- Better use of rpm macros
- Disable all bindings
* Tue Oct 08 2003 Joop Stakenborg
- Fix 'make rpm' again by disabling c++ bindings.
- rotclass.h and rigclass.h go into the devel package for now (FIXME)
* Wed Jan 15 2003 Joop Stakenborg
- Fix the spec file for 1.1.4CVS
- 'make rpm' should work now
* Thu Jun 17 2002 Stephane Fillod
- Added rotator support
- Added RPC daemon, hamlib.m4
* Mon Jul 18 2001 Stephane Fillod
- Made initial "working" SPEC file

Places

File hamlib.changes of Package hamlib (Revision 6826c42dca2cba57ad01f347f75b3916)

Places