File sg3_utils.spec of Package sg3_utils

Overview Repositories Revisions Requests Users Attributes Meta

File sg3_utils.spec of Package sg3_utils

#
# spec file for package sg3_utils
#
# Copyright (c) 2012 SUSE LINUX Products GmbH, Nuernberg, Germany.
#
# All modifications and additions to the file contributed by third parties
# remain the property of their copyright owners, unless otherwise agreed
# upon. The license for this file, and modifications and additions to the
# file, is the same license as for the pristine package itself (unless the
# license for the pristine package is not an Open Source License, in which
# case the license is the MIT License). An "Open Source License" is a
# license that conforms to the Open Source Definition (Version 1.9)
# published by the Open Source Initiative.

# Please submit bugfixes or comments via http://bugs.opensuse.org/
#

Url:            http://sg.danny.cz/sg/sg3_utils.html

Name:           sg3_utils
Version:        1.33
Release:        0
Summary:        A collection of tools that send SCSI commands to devices
License:        GPL-2.0+ and BSD-3-Clause
Group:          Hardware/Other
Source:         http://sg.danny.cz/sg/p/sg3_utils-%{version}.tgz
Source2:        http://www.garloff.de/kurt/linux/rescan-scsi-bus.sh
Requires(pre):  %insserv_prereq
Provides:       scsi
Provides:       sg_utils
Obsoletes:      scsi <= 1.7_2.38_1.25_0.19_1.02_0.93
BuildRoot:      %{_tmppath}/%{name}-%{version}-build

%description
The sg3_utils package contains utilities that send SCSI commands to
devices. As well as devices on transports traditionally associated with
SCSI (e.g. Fibre Channel (FCP), Serial Attached SCSI (SAS) and the SCSI
Parallel Interface(SPI)) many other devices use SCSI command sets.
ATAPI cd/dvd drives and SATA disks that connect via a translation layer
or a bridge device are examples of devices that use SCSI command sets.

%package devel
Summary:        A collection of tools that send SCSI commands to devices
License:        GPL-2.0+ and BSD-3-Clause
Group:          Development/Libraries/C and C++
Requires:       %{name} = %{version}

%description devel
The sg3_utils package contains utilities that send SCSI commands to
devices. As well as devices on transports traditionally associated with
SCSI (e.g. Fibre Channel (FCP), Serial Attached SCSI (SAS) and the SCSI
Parallel Interface(SPI)) many other devices use SCSI command sets.
ATAPI cd/dvd drives and SATA disks that connect via a translation layer
or a bridge device are examples of devices that use SCSI command sets.

%prep
%setup -q

%build
%configure --disable-static --with-pic
%{__make} %{?_smp_mflags}

%install
%makeinstall
install -m 755 scripts/scsi_logging_level $RPM_BUILD_ROOT%{_bindir}
install -m 755 %{S:2} $RPM_BUILD_ROOT%{_bindir}
%{__rm} -f %{buildroot}%{_libdir}/*.la

%post -p /sbin/ldconfig

%postun -p /sbin/ldconfig

%files
%defattr(-,root,root)
%doc README README.sg_start 
%doc ChangeLog CREDITS NEWS
%attr(755,root,root) %{_bindir}/sg_dd
%attr(755,root,root) %{_bindir}/sg_inq
%attr(755,root,root) %{_bindir}/sg_scan
%attr(755,root,root) %{_bindir}/sg_rbuf
%attr(755,root,root) %{_bindir}/sginfo
%attr(755,root,root) %{_bindir}/sg_readcap
%attr(755,root,root) %{_bindir}/sgp_dd
%attr(755,root,root) %{_bindir}/sg_map
%attr(755,root,root) %{_bindir}/sg_turs
%attr(755,root,root) %{_bindir}/sg_test_rwbuf
#%%attr(755,root,root) %%{_bindir}/scsi_devfs_scan
%attr(755,root,root) %{_bindir}/sgm_dd
%attr(755,root,root) %{_bindir}/sg_read
%attr(755,root,root) %{_bindir}/sg_logs
%attr(755,root,root) %{_bindir}/sg_modes
%attr(755,root,root) %{_bindir}/sg_opcodes
%attr(755,root,root) %{_bindir}/sg_persist
%attr(755,root,root) %{_bindir}/sg_senddiag
%attr(755,root,root) %{_bindir}/sg_reset
%attr(755,root,root) %{_bindir}/sg_emc_trespass
%attr(755,root,root) %{_bindir}/sg_read_long
%attr(755,root,root) %{_bindir}/sg_requests
%attr(755,root,root) %{_bindir}/sg_ses
%attr(755,root,root) %{_bindir}/sg_verify
%attr(755,root,root) %{_bindir}/sg_write_long
%attr(755,root,root) %{_bindir}/sg_luns
%attr(755,root,root) %{_bindir}/sg_prevent
%attr(755,root,root) %{_bindir}/sg_get_config
%attr(755,root,root) %{_bindir}/sg_sync
%attr(755,root,root) %{_bindir}/sg_wr_mode
%attr(755,root,root) %{_bindir}/sg_reassign
%attr(755,root,root) %{_bindir}/sg_rtpg
%attr(755,root,root) %{_bindir}/sg_format
%attr(755,root,root) %{_bindir}/sg_rmsn
%attr(755,root,root) %{_bindir}/sg_start
%attr(755,root,root) %{_bindir}/sg_ident
%attr(755,root,root) %{_bindir}/sg_map26
%attr(755,root,root) %{_bindir}/sg_rdac
%attr(755,root,root) %{_bindir}/sg_vpd
%attr(755,root,root) %{_bindir}/sg_raw
%attr(755,root,root) %{_bindir}/sg_write_buffer
%attr(755,root,root) %{_bindir}/sg_sat_identify
%attr(755,root,root) %{_bindir}/sg_read_buffer
%attr(755,root,root) %{_bindir}/sg_safte
%attr(755,root,root) %{_bindir}/sg_sat_phy_event
%attr(755,root,root) %{_bindir}/sg_sat_set_features
%attr(755,root,root) %{_bindir}/sg_stpg
%attr(755,root,root) %{_bindir}/scsi_logging_level
%attr(755,root,root) %{_bindir}/rescan-scsi-bus.sh
%attr(755,root,root) %{_bindir}/sg_get_lba_status
%attr(755,root,root) %{_bindir}/sg_read_block_limits
%attr(755,root,root) %{_bindir}/sg_unmap
%attr(755,root,root) %{_bindir}/sg_write_same
%attr(755,root,root) %{_bindir}/sg_decode_sense
%attr(755,root,root) %{_bindir}/sg_referrals
%attr(755,root,root) %{_bindir}/sg_sanitize
%doc %{_mandir}/man8/sg_dd.8.gz
%doc %{_mandir}/man8/sgp_dd.8.gz
%doc %{_mandir}/man8/sgm_dd.8.gz
%doc %{_mandir}/man8/sg_map.8.gz
%doc %{_mandir}/man8/sg_rbuf.8.gz
%doc %{_mandir}/man8/sg_read.8.gz
%doc %{_mandir}/man8/sg_scan.8.gz
%doc %{_mandir}/man8/sginfo.8.gz
%doc %{_mandir}/man8/sg_readcap.8.gz
%doc %{_mandir}/man8/sg_turs.8.gz
%doc %{_mandir}/man8/sg_inq.8.gz
%doc %{_mandir}/man8/sg_test_rwbuf.8.gz
#%%doc %%{_mandir}/man8/scsi_devfs_scan.8.gz
%doc %{_mandir}/man8/sg_start.8.gz
%doc %{_mandir}/man8/sg_reset.8.gz
%doc %{_mandir}/man8/sg_modes.8.gz
%doc %{_mandir}/man8/sg_logs.8.gz
%doc %{_mandir}/man8/sg_opcodes.8.gz
%doc %{_mandir}/man8/sg_persist.8.gz
%doc %{_mandir}/man8/sg_senddiag.8.gz
%doc %{_mandir}/man8/sg_emc_trespass.8.gz
%doc %{_mandir}/man8/sg_read_long.8.gz
%doc %{_mandir}/man8/sg_requests.8.gz
%doc %{_mandir}/man8/sg_ses.8.gz
%doc %{_mandir}/man8/sg_verify.8.gz
%doc %{_mandir}/man8/sg_write_long.8.gz
%doc %{_mandir}/man8/sg_luns.8.gz
%doc %{_mandir}/man8/sg_prevent.8.gz
%doc %{_mandir}/man8/sg_get_config.8.gz
%doc %{_mandir}/man8/sg_sync.8.gz
%doc %{_mandir}/man8/sg_wr_mode.8.gz
%doc %{_mandir}/man8/sg_reassign.8.gz
%doc %{_mandir}/man8/sg_rtpg.8.gz
%doc %{_mandir}/man8/sg_format.8.gz
%doc %{_mandir}/man8/sg_rmsn.8.gz
%doc %{_mandir}/man8/sg_ident.8.gz
%doc %{_mandir}/man8/sg_map26.8.gz
%doc %{_mandir}/man8/sg_rdac.8.gz
%doc %{_mandir}/man8/sg_vpd.8.gz
%doc %{_mandir}/man8/sg_raw.8.gz
%doc %{_mandir}/man8/sg_write_buffer.8.gz
%doc %{_mandir}/man8/sg_sat_identify.8.gz
%doc %{_mandir}/man8/sg_read_buffer.8.gz
%doc %{_mandir}/man8/sg_safte.8.gz
%doc %{_mandir}/man8/sg_sat_phy_event.8.gz
%doc %{_mandir}/man8/sg_sat_set_features.8.gz
%doc %{_mandir}/man8/sg_stpg.8.gz
%doc %{_mandir}/man8/sg3_utils.8.gz
%doc %{_mandir}/man8/scsi_readcap.8.gz
%doc %{_mandir}/man8/scsi_ready.8.gz
%doc %{_mandir}/man8/scsi_start.8.gz
%doc %{_mandir}/man8/scsi_stop.8.gz
%doc %{_mandir}/man8/sg_get_lba_status.8.gz
%doc %{_mandir}/man8/sg_read_block_limits.8.gz
%doc %{_mandir}/man8/sg_unmap.8.gz
%doc %{_mandir}/man8/sg_write_same.8.gz
%doc %{_mandir}/man8/sg_decode_sense.8.gz
%doc %{_mandir}/man8/sg_referrals.8.gz
%doc %{_mandir}/man8/sg_sanitize.8.gz
%doc %{_mandir}/man8/scsi_logging_level.8.gz
%doc %{_mandir}/man8/scsi_mandat.8.gz
%doc %{_mandir}/man8/scsi_satl.8.gz
%doc %{_mandir}/man8/scsi_temperature.8.gz
%attr(755,root,root) %{_libdir}/libsgutils2.so.*

%files devel
%defattr(644,root,root)
%attr(755,root,root) %{_libdir}/libsgutils2.so
%attr(755,root,root) %dir %{_prefix}/include/scsi
%{_includedir}/scsi/sg_cmds.h
%{_includedir}/scsi/sg_cmds_basic.h
%{_includedir}/scsi/sg_cmds_extra.h
%{_includedir}/scsi/sg_lib.h
%{_includedir}/scsi/sg_pt.h
%{_includedir}/scsi/sg_io_linux.h
%{_includedir}/scsi/sg_linux_inc.h
%{_includedir}/scsi/sg_cmds_mmc.h
%{_includedir}/scsi/sg_lib_data.h

%clean
test ! -z "$RPM_BUILD_ROOT" -a "$RPM_BUILD_ROOT" != "/" && rm -rf $RPM_BUILD_ROOT
rm -rf $RPM_BUILD_DIR/sg3_utils-%{version}

%changelog

Places

File sg3_utils.spec of Package sg3_utils

Places