Sign Up
Log In
Log In
or
Sign Up
Places
All Projects
Status Monitor
Collapse sidebar
Package not found: openSUSE:42:Factory-Candidates-Check/kdevelop5-pg-qt
home:luc14n0:branches:devel:libraries:c_c++
udisks2
udisks2.changes
Overview
Repositories
Revisions
Requests
Users
Attributes
Meta
File udisks2.changes of Package udisks2
------------------------------------------------------------------- Wed Aug 16 23:33:19 UTC 2023 - Luciano Santos <luc14n0@opensuse.org> - Update to version 2.10.0: + This release brings large number of internal changes, while keeping the promise of API stability. This development cycle was mostly driven by libblockdev 3.0 API overhaul. + Partitioning was ported to libfdisk. + The kbd and vdo libblockdev plugins were removed and so were zram, bcache and vdo udisks modules. + Definition of supported filesystems was moved to libblockdev and filesystem operations were unified. + Native NVMe support has been added through libnvme. + Syntax of configurable mount options was extended to separate filesystem signature and filesystem driver used for mounting. + A number of workarounds was placed around the org.freedesktop.UDisks2.Filesystem.Size property value retrieval to avoid excessive I/O traffic whenever possible. + Bash and Zsh completion enhancements. + lvm2 module uevent handling improvements. + ATA Secure Erase is now allowed only on top-level block objects. + Extra iSCSI node parameters are now honoured properly. + FIPS mode fixes. + Added support for resolving devices by PARTLABEL and PARTUUID. + Full support for setting filesystem and partition UUIDs. + Dynamic mountpoint name sanitization and ACL fixes. + Added support for LVM2 RAID. + UUID of Bitlocker volumes is now properly exposed. + Added an option to force/avoid creation of mdraid write-intent bitmap. + Updated translations. - Drop default_luks_encryption macro definition. It's no longer needed as upstream defaults to LUKS2 now. - Drop bcache, vdo and zram sub-packages, following upstream changes, and libblockdev-kbd(-devel) BuildRequires/Requires. - Drop bogus build requirement on libblockdev-lvm-dbus-devel, and move libblockdev-lvm-devel BuildRequires to the lvm2 module sub-package. - Move libconfig and libstoragemgmt pkgconfig() BuildRequires to the lsm module sub-package, and libblockdev-btrfs-devel BuildRequires to the btrfs modules sub-package, which is where they belong. - Add libblockdev-nvme-devel BuildRequires and libblockdev-nvme Requires as new required dependencies. - Drop harden_udisks2-zram-setup@.service.patch: It's unneeded now that the zram module has been deprecated. - Drop merged upstream patches: 0001-udisksata-Move-the-low-level-PM-state-call.patch, 0001-udiskslinuxfilesystem-Make-the-size-property-retriev.patch, 0001-udiskslinuxmountoptions-Do-not-free-static-daemon-re.patch, 0001-udiskslinuxprovider-Only-update-related-objects-on-u.patch. - Split Bash and Zsh (new to this release) completion scripts to sub-packages of their own. - Amend GPL-2.0-or-later License tags to LGPL-2.0-or-later for the btrfs, lvm2 and lsm UDisks modules sub-packages. This correction is based on what's explicitly stated on the source code from UDisks modules' folders under the modules/ top-level directory. ------------------------------------------------------------------- Tue Nov 22 08:21:22 UTC 2022 - Thomas Blume <thomas.blume@suse.com> - avoid wakening spun-down disks on unrelated events (bsc#1120608) * add: 0001-udisksata-Move-the-low-level-PM-state-call.patch 0001-udiskslinuxfilesystem-Make-the-size-property-retriev.patch 0001-udiskslinuxprovider-Only-update-related-objects-on-u.patch ------------------------------------------------------------------- Wed Nov 16 08:14:50 UTC 2022 - Thomas Blume <thomas.blume@suse.com> - fix crash during shutdown (bsc#1205371) * add: 0001-udiskslinuxmountoptions-Do-not-free-static-daemon-re.patch ------------------------------------------------------------------- Fri May 20 07:45:36 UTC 2022 - Johannes Segitz <jsegitz@suse.com> - Added hardening to systemd service(s) (bsc#1181400). Added patch(es): * harden_udisks2-zram-setup@.service.patch * harden_udisks2.service.patch ------------------------------------------------------------------- Mon Jan 31 15:28:11 UTC 2022 - Bjørn Lie <bjorn.lie@gmail.com> - Drop gtk-doc BuildRequires, and pass disable-gtk-doc to configure, the included gtk-docs are fine, we do not need to build them ourselves. ------------------------------------------------------------------- Thu Jan 27 08:00:22 UTC 2022 - Bjørn Lie <bjorn.lie@gmail.com> - Stop packaging libudisks_vdo standalone module, it is deprecated. Do this via passing explicit disable-vdo to configure and dropping libblockdev-vdo-devel BuildRequires. Add a libudisks2_0_vdo Obsoletes to ease updates. - No longer remove upstream config files, we want to be able to load modules on demand. Note that we move an example file to docs to keep sysconfdir clean of non-conf files. - Add a default_luks_encryption define, and set it to luks2, sed this macro into source, future versions of udisks will not need this, as upstream moves to luks2 by default. - Ghost a dir/file created by us. - Split out API docs into separate docs sub-package. ------------------------------------------------------------------- Wed Nov 17 18:30:14 UTC 2021 - Luciano Santos <luc14n0@linuxmail.org> - Update to version 2.9.4: + Many fixes, improvements, and additions to the code. + Mount options: - Always use errors=remount-ro for ext filesystems; - Add ntfs3 kernel driver options. + Build: Remove warnings unknown to clang. + Tests: Adapt to clang differences when causing a segfault. - Changes from version 2.9.3: + Many fixes, improvements, and additions to the code and test. - Add "%tmpfiles_create %{_tmpfilesdir}/udisks2.conf" call in %post section to make sure /run/media will be created right after the instalation of udisks2. ------------------------------------------------------------------- Fri Feb 12 00:00:13 UTC 2021 - Dirk Müller <dmueller@suse.com> - update to 2.9.2: * udiskslinuxblock: Survive a missing /etc/crypttab * lvm2: Fix leaking BDLVMVDOPooldata * tests: Test modules that are actually enabled during build * build: Exclude VDO module from distcheck build * udisksfstabentry: Add udisks_fstab_entry_has_opt() * udiskslinuxblock: Reflect fstab "noauto" mount option in HintAuto * udiskslinuxblock: Update hints after fstab change * tests: Add tests for Block hints * udiskslinuxfilesystemhelpers: Make TakeOwnership() race free * tests: Extend filesystem test_take_ownership tests with symlinks * mount options: Allow 'nosymfollow' mount option for unprivileged mounts * udisksstate: Silence the block device busy messages on cleanup lock * udev: Distinguish mmcblk-class device types * udev: Propagate mmcblk disk attributes to mmcblk_boot devices * udiskslinuxdrive: Tweak the 'removable'/'ejectable' hints for mmcblk-class devices * udiskslinuxblock: Tweak the hints for mmcblk-class devices * udisksdaemonutil: Refactor udisks_daemon_util_trigger_uevent() out of UDisksLinuxBlockObject * udiskslinuxmanager: Trigger uevent after loop device setup * tests: Remove scsi_debug serial number checks * tests: Skip zram tests if zram module is already loaded * treewide: Fix typos * AUTHORS: Add tbzatek as the maintainer * tests: Do not use nilfs2 as an example of non-resizable FS * Memory leak fixes * doc: Update config file path - Drop udisks2-Fix-memory-leaks.patch, and udisks2-lvm2-Fix-leaking-BDLVMVDOPooldata.patch (upstream). ------------------------------------------------------------------- Sat Dec 19 16:16:59 UTC 2020 - Bjørn Lie <bjorn.lie@gmail.com> - Add upstream bugfix patches: + udisks2-Fix-memory-leaks.patch + udisks2-lvm2-Fix-leaking-BDLVMVDOPooldata.patch ------------------------------------------------------------------- Sun Sep 6 07:24:30 UTC 2020 - Milan Savić <milsav92@outlook.com> - Update to version 2.9.1: + This is mostly a bugfix release, notable changes include: - active modules are now tracked in a daemon state file and are automatically reloaded on next startup in case of previous unclean daemon shutdown - further improvements in object property updates while handling method calls - zram module fixes: + compatibility improvements with existing zram generators and toolkits + the zram-setup@.service systemd unit has been renamed to udisks2-zram-setup@.service + related udev rules have been separated into 90-udisks2-zram.rules + the zram.conf.d path is now configurable and defaults to /usr/lib/zram.conf.d - Update to version 2.9.0: + This 2.9.0 release brings many changes to the daemon core, internal modularity and the libudisks2 library. No public API has been removed, there is a couple of deprecations however. + There's a major change in how and when D-Bus object properties are updated. As a general rule when a method call returns affected objects should now have their properties updated by that moment. This is an ongoing task and while majority of the daemon API has been covered, there are pending issues in some of the modules. + Configurable mount options is a new big feature for this release, allowing sysadmins to re-define default mount options for each filesystem type. Extensive documentation is available at http://storaged.org/doc/udisks2-api/latest/mount_options.html + Internal module API has been reworked, modules should now be enabled separately via the new EnableModule() call that also reports initialization failures. The old org.freedesktop.UDisks2.Manager.EnableModules() call has been deprecated. + Additional feature highlights: - building the daemon can now be disabled via configure switch, only libudisks2 will be built - removed the systemd mount cleanup service, mount state is now tracked separately for persistent and non-persistent mount points and cleanup of lingering persistent mount points is performed on daemon startup (e.g. on system boot) - new LVM-VDO integration, deprecated the standalone VDO module - added support for (un)locking BitLocker devices - libudisks2 now includes generated GDBus code for compiled-in modules, separate pkg-config files are provided as well ------------------------------------------------------------------- Thu Nov 14 18:35:03 UTC 2019 - Bjørn Lie <bjorn.lie@gmail.com> - Update to version 2.8.4: + This udisks-2.8.4 release brings couple of bugfixes, docs and test fixes and translation updates. With ongoing focus on development towards udisks-2.9.0, this is just a small maintenance release. ------------------------------------------------------------------- Thu Sep 19 12:14:12 UTC 2019 - Ludwig Nussel <lnussel@suse.de> - Do not recommend lang package. The lang package already has a supplements. ------------------------------------------------------------------- Tue Jul 9 09:26:58 UTC 2019 - Thomas Blume <thomas.blume@suse.com> - don't call systemd uninstall macro for clean-mount-point@.service template (boo#1139996) ------------------------------------------------------------------- Thu Jun 13 18:06:34 UTC 2019 - Bjørn Lie <bjorn.lie@gmail.com> - Update to version 2.8.3: + This release brings many memory leak fixes with similar work done in libblockdev-2.22. While libblockdev version requirement remains unchanged, it's strongly recommended to use both releases together to get full coverage of the fixes. + Other notable changes include: - Default and supported encryption types are now exposed on the org.freedesktop.UDisks2.Manager interface. - Minor org.freedesktop.UDisks2.Filesystem improvements related to updating properties upon method call return. - Various test fixes and improvements. - Updated translations. ------------------------------------------------------------------- Wed Mar 20 13:40:19 CET 2019 - ro@suse.de - update to 2.8.2 + migration from intltool to gettext, udisks no longer depends on gnome-common + added 'windows_names' as a default mount option for ntfs-3g + fixed an issue potentially leading to open filedescriptors exhaustion - drop buildreq for intltool ------------------------------------------------------------------- Wed Feb 13 17:50:45 UTC 2019 - Jan Engelhardt <jengelh@inai.de> - Generalize VDO description. - Fix faulty grammar. ------------------------------------------------------------------- Tue Feb 12 07:53:01 UTC 2019 - bjorn.lie@gmail.com - Add more info to description of vdo. ------------------------------------------------------------------- Wed Jan 30 21:34:08 UTC 2019 - bjorn.lie@gmail.com - Add libblockdev-vdo-devel BuildRequires: Build the new vdo module. Following this, add new vdo sub-package. ------------------------------------------------------------------- Thu Jan 24 21:17:14 UTC 2019 - bjorn.lie@gmail.com - Update to version 2.8.1: + Mostly bugfixes. - Changes from version 2.8.0: + Introduce a new VDO module that is built on top of libblockdev-vdo. + General bugfixes. + Support creating LUKS 2 encrypted devices and other LUKS-related enhancements. ------------------------------------------------------------------- Thu Jan 24 20:55:44 UTC 2019 - bjorn.lie@gmail.com - Add explicit libblockdev-lvm-dbus-devel BuildRequires: Previously pulled in implicitly. ------------------------------------------------------------------- Fri Jan 11 11:54:40 UTC 2019 - Dominique Leuenberger <dimstar@opensuse.org> - Update to version 2.7.8: + Fix string format vulnerability (CVE-2018-17336) ------------------------------------------------------------------- Wed Apr 25 22:59:33 UTC 2018 - luc14n0@linuxmail.org - Add missing libblockdev-loop Requires tag: it is needed by default. ------------------------------------------------------------------- Wed Mar 28 02:56:37 UTC 2018 - luc14n0@linuxmail.org - Require specific libblockdev plugins in due udisks2's modules, following libblockdev's plugins split (bsc#1086447). - Drop redundant libblockdev-devel BuildRequires: it is not needed once its pkgconfig module is already a requirement. ------------------------------------------------------------------- Tue Mar 6 00:34:27 UTC 2018 - luc14n0@linuxmail.org - Fix BuildRequires/Requires tags related to libblockdev and libatasmart dependencies. - Drop storaged Provides tags since there is no need for them. - Switch libconfig-devel and libstoragemgmt-devel BuildRequires by their pkgconfig modules counterparts. - Add a Recommends tag for the btrfs module to offer support for the openSUSE's file system of choice by default. ------------------------------------------------------------------- Thu Mar 1 14:32:37 UTC 2018 - jengelh@inai.de - Rectify grammar issues in summaries ------------------------------------------------------------------- Fri Nov 17 02:40:30 UTC 2017 - luc14n0@linuxmail.org - Update to version 2.7.6: + Add: UdisksUtabEntry and read-write lock. + Fix escaping mountpoint for the cleanup service. + Check for all LUKS devices when looking for CryptoBackingDevice. + First implementation of udisksutabmonitor. + Invoke job_complete in the proper context in order to avoid deadlocks. + Generate autocleanup functions for interfaces. + Update documentation. - Changes from version 2.7.5: + Add: - 'no-discard' option to formatting methods. - An assertion method for checking an objects interfaces. + Fix: - Possible NULL pointer dereference in: udiskslinuxdrive.c, udiskslinuxmdraidobject.c and udisksclient.c - Resource leak. - size_str memory leaks in UDisksObjectInfo. - Copy-paste error in apply_configuration_thread_func from udiskslinuxdriveata.c. - "Deadcode" and ignore "check return" warnings in udisksctl.c. + Resolve mountpoint to the real path. + Include exFAT as a possible partition type for ID 0x07. + Always try to read configuration from crypttab in handle_unlock. + Make sure the table_type is consistent in handle_create_partition. + Wait for device to become initialized before probing it. + Use different mode/dmode for shared file systems. - Changes from version 2.7.4: + Add: New function to set label on swap devices. + Fix: - Uninitalized value in "udisks_linux_loop_update"; - Loop device automounting in GNOME. + Run cryptsetup before returning from non-blocking Format. + Use new libblockdev functionality to disable checks during init. + Do not try to create file watchers for RAIDs without redundancy. + Try to use libblockdev to get RAID array size. + Re-add support the legacy BIOS bootable GPT flag. - Changes from version 2.7.3: + Add: - Version info to docstrings of the partition Resize function; - New ResolveDevice function; - New OpenDevice function; - some missing functions to doc/udisks2-sections.txt.in.in. + Fix: - Wrong GSList pointer declaration in "handle_get_block_devices"; - "supports_owners" flag for UDF; - ExFAT partition type; - Bash completion for udisksctl; - Force unmounting; - Building documentation with new gtk-doc. + Process partition resize update before return. + Wait for cleartext device object to disappear on Lock(). + Ignore Asus Zendisk virtual CDROM and ZFS member partitions. + Set corrent part type/id and GUID for UDF formatted partitions. + Use LUKS specific partition ID and GUID. + Make iSCSI Login and Logout wait for DBus objects update. + Disable cleaning using blivet for now. + Start even if a libblockdev plugin fails to load. - Changes from version 2.7.2: + Add: - Filesystem Resize, Check and Repair; - A new "Partitions" property to "PartitionTable" interface; - A function to: . "take ownership" of a filesystem; . List all block devices. - A function to wait for an object to disappear. + Fix: - Detection of drives created using isohybrid images (fdo#1437791); - Setting "SetupByUID" property when adding a new loop device; - How we create UDF file systems. + Wait for: - The bcache object to disappear after BcacheDestroy; - Zram objects to disappear on DestroyDevices(). + Resize method for Partition interface. + Trigger change uevent on disk after adding partitions to it. + Use the assert with multiple tries for Block.Configuration. + Do not wait for partitions to appear after LoopSetup. + Try harder to ignore WD SmartWare virtual CDs. - Changes from version 2.7.1: + Don't always fail on missing LibStorageMgmt support. + Fix: - Broken partition authorization code; - How UDisksClient filters property changes; - The position to wait for a partition to appear at. + Don't use serial as unique ID for drive objects. + udiskslinuxblockbcache.c: Fix uninitialized variable. + udisksiscsiutil.c: Correct strncpy lengths. + udiskslinuxiscsisessionobject.c: Correct precondition check. + lsm_linux_drive.c: Remove std_lsm_vol_data_free error case. + udiskslinuxvolumegroupobject.c: Remove variable shadow lvs_p. + udiskssimplejob.c: Allow NULL for message. + Re-create sysfs watchers for changed mdraid devices. + UDisksClient: Do not try remove changed_blacklist hash table in finalize. + Query methods for available utility binaries. + Clear GError after calling "bd_part_get_part_by_pos". + Use "model_serial" as unique ID for drive objects. + Add "--yes" arg when resizing filesystem with "lvresize". + Do not trigger extra uevents for newly created partitions. + Free the partition spec libblockdev gives us. + Allow the user to specify the partition type. - Changes from version 2.7.0: + udisksdaemonutil.c: Fix GVariant resource leak. + Use libblockdev swap plugin for swapspace. + Use libblockdev FS plugin for mounting and unmounting devices. + Use libblockdev: - For: . Partitioning code; . Wiping newly created partitions; . LUKS operations. - To get LUKS UUID for LUKS open; - As a library not just the plugins; - MDRAID code and wipefs calls in MDRAID code. + Use libblockdev-lvm for: - LV and VG operations; - VolumeGroupCreate() too; - When updating VG on Poll() call. + Fix: - bd_reinit and g_clear_error calls in btrfs, zram and bcache; - Docstring of 'CreateSnapshot' method in '.Filesystem.BTRFS'; - Requires and BuildRequires for libblockdev; - API for BcacheCreate function. + Add: - Libblockdev MDRAID and FS plugins to BuildRequires; - 'options' parameter do zRAM 'Refresh' function; - A function for running threaded jobs synchronously; - A new configure option --enable-available-modules. + Remove unused variables in handle_mdraid_create. + Create Job objects for partitioning related actions. + Change: - btrfs module API to be consistent with udisks core; - bcache properties do CamelCase; - ZRAM 'CreateDevices' function to return newly created; - zRAM properties to CamelCase. + Bcache, btrfs and zRAM modules: Handle invocations in threads. + Do not try to set GError over the top of a previous GError. + zRAM: Extract used CompAlgorithm as a single value. ZRAMs. + Move new partition start if overlaps with extended partition metadata. + Do not start threaded jobs automatically + Require and initialize the libblockdev-lvm plugin + Check that blockdev/lvm.h is available if LVM2 support requested. + Also create thin pools using libblockdev-lvm. + Get VGs with bd_lvm_vgs() run in a thread. + Update information about PVs, LVs and VGs using libblockdev-lvm. + Get rid of the udisks-lvm helper program. + Use: - Info for metadata LV when updating LV which has one; - Systemd-defined macros in the spec file template; - bd_lvm_vgreduce() instead of running 'vgreduce'. + REMOVE-ME: use the CLI-based libblockdev-lvm plugin. + Make sure we have the AX_CHECK_ENABLE_DEBUG macro. + Also check if libblockdev supports bcache. + Require 'udev' not 'systemd-udev'. - Adopt the use of %make_build and %make_install while dropping deprecated use of raw commands, following the best practices. - Pass disable-static to configure as static libs are enabled by default. And enable-bcache, enable-btrfs, enable-lsm, enable-lvm2, enable-lvmcache and enable-zram to enable new available features. - Add blkid, blockdev, libsystemd and mount pkgconfig modules, and libbd_btrfs-devel, libbd_crypto-devel, libbd_fs-devel, libbd_kbd-devel, libbd_loop-devel, libbd_lvm-devel, libbd_mdraid-devel, libbd_part-devel, libbd_swap-devel, libconfig-devel, libstoragemgmt-devel, lvm2-devel BuildRequires as new dependencies. - Add libblockdev, libbd_crypto, libbd_fs, libbd_loop, libbd_mdraid, libbd_part and libbd_swap Requires as new run time requirements. - Add e2fsprogs, xfsprogs, and dosfstools Requires, being the first needed by mkfs.ext3, mkfs.ext3 and e2label. The second, by mkfs.xfs and xfs_admin. And the third, by mkfs.vfat. - Add gio-unix-2.0 and gmodule-2.0 pkgconfig BuildRequires: note that they was already being pulled with pkgconfig(glib-2.0) and used, once they live in the same devel package. - Drop pkgconfig(udev) BuildRequires: no longer needed. - Replace libgudev-1_0-devel and pkgconfig(systemd) BuildRequires by gudev-1.0 and libsystemd, respectively. - Add LGPL-2.0+ to the preamble License tag once the preamble License tag is used for the source RPM and binary RPM packages. - Correct some subpackages LGPL-2.1+ License tags to LGPL-2.0+ as pointed by the COPYING and source files. ------------------------------------------------------------------- Wed Jul 5 10:03:57 UTC 2017 - Thomas.Blume@suse.com - Update to version 2.6.5 (fate#323354) * switch to new maintained codestream at https://github.com/storaged-project/udisks * Detailed changelog in /usr/share/doc/packages/udisks2/NEWS ------------------------------------------------------------------- Fri Dec 9 09:44:18 UTC 2016 - dimstar@opensuse.org - Update to version 2.1.8: + Allow NTFS mount option "big_writes". + Don't coldplug uninitilized udev devices. + Detect old (non-Pro) MemoryStick cards. + Lock the partition table while creating a new partition. + exfat: Drop umask=0077 default. + udisks2.service: Add KillSignal=SIGINT. + btrfs: Add support for changing label. + Updated translations. - Replace pkgconfig(libsystemd-login) BuildRequires with pkgconfig(libsystemd): the two have been merged since systemd 209. - Drop udisks2-Reread-partition-table-before-wiping.patch: fixed upstream. ------------------------------------------------------------------- Fri Apr 15 14:43:34 UTC 2016 - zaitor@opensuse.org - Add udisks2-Reread-partition-table-before-wiping.patch: Reread partition table before wiping when creating new partitions (fdo#85477). ------------------------------------------------------------------- Fri Mar 4 07:46:25 UTC 2016 - sor.alexei@meowr.ru - Update to 2.1.7: + Allow disabling ACL. + udisksctl: Properly redirect stdout. + Catch bogus UUID changes of MDRAIDs. + Fix udiskctl help for glib 2.45. + udisks2.service.in: Add [Install] section. + Fix translator comments in udisksobjectinfo.c. + integration-test: Explicitly require UDisks 2.0 typelib. + integration-test: Fix wait_timeout/busy error messages. + integration-test: PEP-8 fixes. + integration-test: Fix Polkit.test_removable_fs. + test_polkitd.py: Fix race condition in waiting for test polkitd. + integration-test: Fix race condition in fake CD drive creation. + integration-test: Add timeout to readd_device(). + Add support for read look-ahead ATA settings (fdo#92488). - Add tarball signing. - Change group to System/Daemons. ------------------------------------------------------------------- Thu Jul 9 21:55:49 UTC 2015 - zaitor@opensuse.org - Update to version 2.1.6: + udev rules: Stop hardcoding sed path. + Fix crash on inaccessible RAID member "state" attribute. + UDF: Drop umask=0077 default. + Install udisksd into a libexecdir. + Fail before formatting if partition contains a partition table. + Fix udisks_daemon_util_file_set_contents() return value handling. + Remove deprecated g_io_scheduler_* calls. + integration-tests: - Settle while waiting for property change. - Don't fail if a SMART test was aborted. - Add a wrapper to write and flush stderr. + Don't ignore isohybrid udf filesystems. + Add support for creating f2fs filesystems. + Decide whether devices are on the same seat by uid, not pid. + UDisksSpawnedJob: Retrieve uid/gid info before forking. ------------------------------------------------------------------- Fri Mar 6 16:00:45 UTC 2015 - sor.alexei@meowr.ru - Update to 2.1.5: * configure: stop using tmpl files for docs. * docs: include the annotation glossary. * Drop default [df]mask for VFAT and NTFS. * Drop unused goto label. * Fix crash in udisks_client_finalize(). * Fix format string signedness warnings. * integration-tests: Don't assume ordering in mount-points property. * integration-test: Skip double mount check for NTFS. * integration-test: Stop requiring the build dependencies. * integration-test: Test fstab parsing. * Make UdisksClient.get_size_for_display() units translatable. * Provide fallback for systems without ACL support. * Recognize PARTUUID and PARTLABEL in fstab. * Support mounting in /media for FHS compatibility. * Update translations. - Add recommended /usr/sbin/rcudisks2 service alias. - Remove obsolete definitions. ------------------------------------------------------------------- Fri Dec 19 12:35:16 UTC 2014 - zaitor@opensuse.org - Update to version 2.1.4: + Add GPT partition types from the Discoverable Partitions Specification. + Remove newly-added "Auto-enabled swap" GTP partition type. + Fine-tune GTP partitions some more. + Send SCSI SYNCHRONIZE CACHE before powering down a drive. + Fix buffer overflow in pick_word_at(). + Add Intel Fast Flash Standby partition GPT type. + Skip password strength checks when changing LUKS passphrase. + Fix build with clang. + Revert "Fix standby timers". + integration-test: - Update for logind. - Fix code formatting. - sync file systems in sync(). - integration-test: Drop sync_workaround, fix property testing. - integration-test: Better failure messages. - integration-test: Fix btrfs test. + Fix display ID for generic FAT. + Update obsolete gnome-common and automake macros. + build: - Use config-aux/ directory. - Enable gcc colors. + Drop obsolete g_type_init(). + Drop obsolete polkit_unix_process_new(). + Fix docs for SmartUpdate(). + Hide Microsoft reserved partition. + Identify JetFlash Transcend drives as thumb drives. + Fix sorting of mount points. + Fix fallback media icons for nonremovable media. + Fix polkit auth string. + Hide DIAGS and IntelRST partitions. + Add a man page for umount.udisks2. + Support building against libsystemd library. + udisks: Change name for Intel SW RAID. + Use internal pm check for smart poll. + Fix standby timers. + Fix TOCTOU race when making directories. + Add missing #include. + Properly initialize all used variables. + udiskslinuxmanager.c: Don't use uninitialized wait_data struct. + Remove useless assignments. + udisks_linux_drive_object_uevent(): Handle null device. + Hide Windows Recovery Environment partitions. + Updated translations. ------------------------------------------------------------------- Mon Mar 10 10:03:31 UTC 2014 - pwieczorkiewicz@suse.com - Update to version 2.1.3: + Identify SD Card Reader in ChromeBook Pixel + Send SCSI START STOP UNIT when powering down a drive + udisksctl: add power-off verb to power off drives + udisksctl: fix grammar + Prefer /dev/VG/LV for LVM2 volumes. + Fix buffer overflow in mount path parsing. If users have the possibility to create very long mount points, such as with FUSE, they could cause udisksd to crash, or even to run arbitrary code as root with specially crafted mount paths. (bnc#865854, CVE-2014-0004) + Use SECTOR_COUNT=1 when issuing ATA IDENTIFY COMMAND + Use reentrant version of getpwuid() for thread safety + udisks_daemon_util_get_caller_uid_sync(): Add missing goto + Fix crash when loop-deleting non-loop device ------------------------------------------------------------------- Sun Feb 16 22:27:14 UTC 2014 - zaitor@opensuse.org - Update to version 2.1.2: + Add exfat mount options. + Hide more rescue partitions. + Build fails due to missing IT_PROG_INTLTOOL macro (fdo#67679). + Add exfat FS integration test. + Drop "david" user name from publish make rules. + Use dosfstools instead of mtools. + Add polkit authorization variables for removable media. + Fix crash when waiting for loop device. - Drop udisks2-20131026-removable-devices-polkit-auth.patch: fixed upstream. ------------------------------------------------------------------- Tue Dec 10 08:33:56 UTC 2013 - pwieczorkiewicz@suse.com - Added udisks2-20131026-removable-devices-polkit-auth.patch. It adds polkit authorization variables for removable media, which allow restricting or granting access to removable media based on its type using polkit authorization rules (fate#312966 fdo#72122). ------------------------------------------------------------------- Sun Nov 24 04:06:19 UTC 2013 - crrodriguez@opensuse.org - define _udevrulesdir only if not already defined - run %udev_rules_update, if defined. ------------------------------------------------------------------- Wed Aug 21 07:04:30 UTC 2013 - dimstar@opensuse.org - Update to version 2.1.1: + Properly identify firewire devices as non-system devices. + Identify Lexar Dual Slot USB 3.0 Reader Professional as a card reader. + Identify Transcend USB 3.0 Multi-Card reader as such. + Promote ZFS partition type to generic. + UDisksClient: Make it possible to get part desc based on the part table subtype. + Add ChromeOS partition types. + Use new SSD icon from g-i-t-e. + Identify Patriot Memory USB sticks as thumb drives. + Fix test for logind availability. + Fix hiding of "WD SmartWare" partitions. + integration-test: Fix for nonexisting /run/udev/rules.d/. + integration-test: For VFAT, ignore case for label comparison. ------------------------------------------------------------------- Mon Mar 18 08:58:58 UTC 2013 - dimstar@opensuse.org - Update to version 2.1.0: + mdraid: Remove spurious argument for the format. + Support broken setups where ID_SERIAL is available but ID_SERIAL_SHORT is not. + Call the right D-Bus completion routines. + integration-test: Update for mkntfs. + Updated translations. ------------------------------------------------------------------- Sun Mar 3 23:10:24 UTC 2013 - hrvoje.senjan@gmail.com - Update to version 2.0.92: + Fix out of source build - set xsltproc path. + Fold UDisksPersistentStore class into UDisksCleanup. + Rename UDisksCleanup to UDisksState. + Don't leak UDisksLinuxDevice when handling uevent. + Check for NULL pointer when creating MD-RAID array. + Use own udev namespace for MD-RAID properties. + Introduce UDISKS_FILESYSTEM_SHARED=1 to use /media for mounting. + Don't wipe extended partitions. + Make sure logical partitions stay within the extended partition. ------------------------------------------------------------------- Thu Jan 17 20:49:53 UTC 2013 - dimstar@opensuse.org - Update to version 2.0.91: + Don't bail in MD-RAID file monitor event handler. + Add MDRaid:RequestSyncAction() method. + Add MDRaid:SyncRate and MDRaid:SyncRemainingTime properties. + Get the MD-RAID sync rate from the right file. + Pull new translations from Transifex. + Use correct polkit action. + Fix up comments in polkit policy file. - Changes from version 2.0.90: + Initial MD-RAID support. - Drop fix_polkit_action_name.diff: it's not applied anyway. ------------------------------------------------------------------- Thu Jan 17 07:36:09 UTC 2013 - vuntz@opensuse.org - Really apply fix_polkit_action_name.diff. ------------------------------------------------------------------- Mon Jan 07 13:30:34 UTC 2013 - stefan.bruens@rwth-aachen.de - Fix name of polkit action (fdo#58629): modify-device-system-other-seat -> modify-device-other-seat ------------------------------------------------------------------- Sun Jan 6 21:02:27 UTC 2013 - dimstar@opensuse.org - Add gptfdisk Requires: sgdisk is called by udisksd to modify the partition tables (bnc#796853). ------------------------------------------------------------------- Mon Nov 12 22:22:01 UTC 2012 - hrvoje.senjan@gmail.com - Update to version 2.0.0 + configure.ac: raise gudev dependency + Add --disable-man configure option + Update list of recovery/system partitions + Add support for creating exFAT filesystems and changing exFAT labels + Add textual descriptions for IMSM Raid members + Use all-caps for RAID + Only do the isohybrid hack for the first partition + Don't complain about missing /etc/crypttab file + Don't complain about missing /etc/fstab file + Make it work without requiring the kernel to be CONFIG_SWAP=y + Mention the right file when complaing about /proc/swaps + Fix glaringly wrong documentation for Filesystem.Mount() + Move bash completion script into /usr/share/bash-completion/completions + Don't require that users define UDISKS_API_IS_SUBJECT_TO_CHANGE + Remove udisks_daemon_util_on_other_seat() from sections.txt + Add workaround annotation for udisks_client_get_block_for_dev() + Enable large file support + Various doc and tests fixes + Bugs fixed: fdo#51063. + Updated translations. - Drop systemd-dynamic-check.diff: fixed upstream. - Dropped gnome-common BuildRequires and call to gnome-autogen.sh, as the patch which needed that is dropped. ------------------------------------------------------------------- Wed Oct 24 12:16:42 UTC 2012 - meissner@suse.com - remove the rpmlintrc after adding the privs bnc#779404 ------------------------------------------------------------------- Wed Oct 17 13:03:06 UTC 2012 - fcrozat@suse.com - Fix build with new udev rules directory location. ------------------------------------------------------------------- Tue Sep 25 09:19:57 UTC 2012 - dimstar@opensuse.org - Update to version 1.99.0: + Catch up with latest polkit guidance + Don't require auth for Standby'ing non-system drives on own seat + Mark Realtek rts5229 based card readers as flash drives + Black-list seemingly invalid WWN for SAMSUNG SP1604N hard disks + Ignore non-Linux software on SanDisk Cruzer + Add drive configuration interfaces and configuration files + Add "Linux Filesystem" GPT partition type + Add support for VMWare filesystem types and GPT partition types + Update integration tests. + Bugs fixed: - fdo#51439: udisks should hide lvm PVs - Changes from version 1.98.0: + Drive: Refuse to eject drives that appear to be in use + udisksd: work if polkitd is not available + Updated documentations + Bugs fixed: - fdo49842: Unhandled rootfs on bind mount - Drop udisks-hide-lvm-raid-partitions.patch: fixed upstream. ------------------------------------------------------------------- Tue Sep 25 09:14:34 UTC 2012 - vuntz@opensuse.org - Update systemd-dynamic-check.diff with patch sent upstream. - Add gnome-common BuildRequires and call to gnome-autogen.sh, as needed by the patch now. ------------------------------------------------------------------- Tue Jul 3 15:39:33 CEST 2012 - tiwai@suse.de - Add systemd-dynamic-check.diff: add a check of running systemd (bnc#769570) ------------------------------------------------------------------- Tue Jun 26 18:18:09 UTC 2012 - gber@opensuse.org - Added udisks-hide-lvm-raid-partitions.patch in order to hide partitions marked as containing LVM and RAID. This is only useful for encrypted partitions (fixes fdo#51439 and bnc#737038). ------------------------------------------------------------------- Fri May 11 14:51:00 UTC 2012 - vuntz@opensuse.org - Update to version 1.97.0: + Several improvements for loop devices + Also check for "target is busy" when checking umount(8) output + UDisksCleanup: Remove stale entries when adding new ones + Add work-around to show FS on CDs/USB sticks created using isohybrid + Several code improvements + Update path to mounted-fs file in documentation - Changes from version 1.96.0: + Actually link with libsystemd-login - Changes from version 1.95.0: + Add multi-seat support + Add versioning macros + Use libacl library instead of setfacl(1) + Work around missing serial/wwn on VMware hard disks + Add separate polkit actions for ejecting media + Make $(udisks2.device) in authentication messages include the vendor/model + Remove unused .filesystem-unmount-others-shared polkit action + Documentation fixes and improvements + Updated translations - Add libacl-devel BuildRequires: it's now really used. ------------------------------------------------------------------- Wed Apr 11 09:33:59 UTC 2012 - vuntz@opensuse.org - Update to version 1.94.0: + Pass --readonly to cryptsetup(8) if device to unlock is read-only + Add udev rules for identifying devices which should not be shown + Fix unmounting large disks when not asked to + Make escaping work properly with non-ASCII UTF-8 strings + Change some D-Bus types from bytestring ('ay') to UTF8 ('s') + Convert some g_warning() uses to udisks_warning() + Improved documentation. ------------------------------------------------------------------- Tue Mar 6 09:00:40 UTC 2012 - vuntz@opensuse.org - Update to version 1.93.0: + Force MediaRemovable to TRUE for e.g. SD cards using the mmc layer + Ensure that whatever we pass as -t to mount(8) is in a whitelist + Ensure that the loop file name we pass to the kernel is always NUL-terminated + Properly escape all device files + Improved documentation. - Remove libacl-devel BuildRequires: not needed anymore. ------------------------------------------------------------------- Mon Feb 27 12:57:10 UTC 2012 - vuntz@opensuse.org - Update to version 1.92.0: + client: Fix bit shifts of flags on 32 bit + Avoid using $XDG_RUNTIME_DIR/media for now + Don't free object twice when deleting a loop device + Use /run/media/$USER for mounting + Move to /usr-only setup and get rid of hardcoded paths to /lib and sbin - Changes from version 1.91.0: + Install a systemd service file if systemd is used + Ensure PATH is set + Fix use of memset(3) + Use org.freedesktop.UDisks2.* for errors, not org.freedesktop.UDisks.* + For mount options, switch from comment=udisks to x-udisks + Prefer mounting in /run/user/$USER/media instead of /media + With /media and /run on tmfs, switch to temporary store for mounted-fs + Make sure that Drive:SortKey sorts e.g. sdz before sdaa + Do coldplug for block devices twice + Use g_dbus_interface_dup_object() and check return value + Shut up valgrind complaing about LOOP_GET_STATUS64 ioctl + Fix a couple of uninitialized warnings and simplify SMART self-test handling + udisksctl: - nuke PORT column in output of 'status' verb - sort the drives using Drive:SortKey for 'status' verb + Documentation fixes. + Build fixes. + Updated translations. - Add systemd-related packaging: + Add pkgconfig(systemd) BuildRequires. + Use %{?systemd_requires}. + Call %service_{add,del}_* macros in scriptlets for udisks2.service. - Add pkgconfig(udev) BuildRequires, now needed to find right path for udev files. - Add libacl-devel BuildRequires, now needed. ------------------------------------------------------------------- Sat Jan 21 10:02:13 UTC 2012 - vuntz@opensuse.org - New udisks2 source package, based on udisks source package. - First version (1.90.0). - udisks 2.x is parallel-installable with udisks 1.x.
Locations
Projects
Search
Status Monitor
Help
OpenBuildService.org
Documentation
API Documentation
Code of Conduct
Contact
Support
@OBShq
Terms
openSUSE Build Service is sponsored by
The Open Build Service is an
openSUSE project
.
Sign Up
Log In
Places
Places
All Projects
Status Monitor
