File asusctl.changes of Package asusctl

Overview Repositories Revisions Requests Users Attributes Meta

File asusctl.changes of Package asusctl (Revision fb50e88da1b48559d1b8a1e259ff2cb3)

Currently displaying revision fb50e88da1b48559d1b8a1e259ff2cb3 , Show latest

-------------------------------------------------------------------
Mon May 24 21:00:02 UTC 2021 - Luke Jones <luke@ljones.dev>

- Version 3.6.0
  + Add GX550L led modes
  + Don't save compute/vfio modes. Option in config for this is removed.
  + Store a temporary non-serialised option in config for if compute/vfio is active
    for informational purposes only (will not apply on boot)
  + Save state for LEDs enabled + sleep animation enabled
  + Save state for AnimMe enabled + boot animation enabled
  + Add extra config options and dbus methods
  + Add power state signals for anime and led
  + Refactor to use channels for dbus signal handler send/recv
  + Split out profiles independant parts to a rog-profiles crate
  + Cleanup dependencies
  + Fix some dbus Supported issues

-------------------------------------------------------------------
Sat May 15 10:30:19 UTC 2021 - Luke Jones <luke@ljones.dev>

- Version 3.5.2
  + bugfix: don't deadlock on change compute/vfio/compute

-------------------------------------------------------------------
Mon Apr 26 03:57:57 UTC 2021 - Luke Jones <luke@ljones.dev>

- Version 3.5.1
  + Anime:
    - Bugfix to multiple user config

-------------------------------------------------------------------
Sun Apr 25 23:45:47 UTC 2021 - Luke Jones <luke@ljones.dev>

- Add asusd-user to package

-------------------------------------------------------------------
Sun Apr 25 03:22:45 UTC 2021 - Luke Jones <luke@ljones.dev>

- Version 3.5.0
    + Keyboard:
    - Split out all aura functionality that isn't dependent on the daemon in to a
        new crate `rog-aura` (incomplete)
    - Keyboard LED control now includes:
        + Enable/disable LED's while laptop is awake
        + Enable/disable LED animation while laptop is suspended and AC plugged in
    - Properly reload the last used keyboard mode on boot
    + Graphics:
    - Correctly enable compute mode for nvidia plus no-reboot or logout if switching
        from vfio/integrated/compute.
    - Add asusd config option to not save compute/vfio mode switch.
    + Anime:
    - Enable basic multiple user anime configs (asusd-user must still be restarted)
    + Profiles:
    - Enable dbus methods for freq min/max, fan curve, fan preset, CPU turbo enable.
        These options will apply to the active profile if no profile name is specified.

-------------------------------------------------------------------
Sun Apr 11 10:51:09 UTC 2021 - Luke Jones <luke@ljones.dev>

- Version 3.4.1
  + Fix anime init

-------------------------------------------------------------------
Sun Apr 11 09:07:44 UTC 2021 - Luke Jones <luke@ljones.dev>

- Version 3.4.0
  + Revert zbus to 1.9.1
  + Use enum to show power states, and catch missing pci path for
    nvidia.
  + Partial user-daemon for anime/per-key done, `asusd-user`.
    Includes asusd-user systemd unit.
  + user-daemon provides dbus emthods to insert anime actions,
    remove from index, set leds on/off
    - Config file is stored in `~/.config/rog/rog-user.cfg`
  + AniMe display parts split out to individual crate in preparation
    for publishing on crates.io

-------------------------------------------------------------------
Sun Apr 11 07:42:37 UTC 2021 - Luke Jones <luke@ljones.dev>

- Project renamed to asusctl

-------------------------------------------------------------------
Sat Mar 3 13:02:34 UTC 2021 - Luke Jones <luke@ljones.dev>

- Version 3.3.0
  + Add ledmodes for G733QS
  + Add ledmodes for GA401Q
  + Default to vfio disabled in configuration. Will now hard-error if enabled and
    the kernel modules are builtin. To enable vfio switching `"gfx_vfio_enable": false,`
    must be changed to `true` in `/etc/asusd/asusd.conf`

-------------------------------------------------------------------
Wed Mar 24 23:08:34 UTC 2021 - Luke Jones <luke@ljones.dev>

- Version 3.2.4
  + Bugfix to vfio builtin errors

-------------------------------------------------------------------
Wed Mar 24 03:34:52 UTC 2021 - Luke Jones <luke@ljones.dev>

- Version 3.2.3
  + Better handling of session tracking
  + List all profile data
  + Get active profile name
  + Get active profile data

-------------------------------------------------------------------
Tue Mar 23 00:50:41 UTC 2021 - Luke Jones <luke@ljones.dev>

- Version 3.2.2
  + Fix brightness control for non-rgb keyboards

-------------------------------------------------------------------
Mon Mar 22 03:49:18 UTC 2021 - Luke Jones <luke@ljones.dev>

- Version 3.2.1
  + Fix brightness control
  + Large cleanup of code relating to LED controls

-------------------------------------------------------------------
Sun Mar 21 08:59:22 UTC 2021 - Luke Jones <luke@ljones.dev>

- Version 3.2.0
  + Refactor keyboard LED handling
  + Added --list for profiles (Thanks @aqez)
  + Added --remove for profiles (Thanks @aqez)
  + Added a graphics mode: vfio. This attaches Nvidia devices to vfio module.
  + Per-key LED modes disabled, which need thinking about how to go ahead with for future

-------------------------------------------------------------------
Tue Mar 16 08:18:07 UTC 2021 - Luke Jones <luke@ljones.dev>

- Version 3.1.7
  + Refactor many parts of daemon
  + Switch out session monitoring to logind-zbus

-------------------------------------------------------------------
Thu Mar 11 08:23:38 UTC 2021 - Luke Jones <luke@ljones.dev>

- Version 3.1.6
  + Graphics switching not waits for all graphical user sessions to log out

-------------------------------------------------------------------
Wed Mar 10 23:36:02 UTC 2021 - Luke Jones <luke@ljones.dev>

- Version 3.1.5
  + Further tweaks to gfx switching
  + More logging on gfx switching
  + Filter bios help according to supported modes
  + Prevent gfx mode switching if in dedicated/G-Sync mode

-------------------------------------------------------------------
Wed Mar 10 03:49:58 UTC 2021 - Luke Jones <luke@ljones.dev>

- Version 3.1.4
  + Notify through dbus if user changes profile manually
  + Better help on CLI, show help only for supported items
  + Bugfix to gfx switcher

-------------------------------------------------------------------
Wed Mar 10 01:10:08 UTC 2021 - Luke Jones <luke@ljones.dev>

- Version 3.1.3
  - Hotfix: gracefully handle removing modules in use caused by
    display-manager not fully shutdown at the time of trying to
    remove modules. It will now retry every 250ms per module

-------------------------------------------------------------------
Tue Mar  9 22:26:35 UTC 2021 - Luke Jones <luke@ljones.dev>

- Version 3.1.2
  + Test and create /etc/X11/xorg.conf.d/ if it doesn't exist
  + Hotfix to better report module issues

-------------------------------------------------------------------
Tue Mar  9 18:38:19 UTC 2021 - Luke Jones <luke@ljones.dev>

- Version 3.1.1
  + Hotfix: add nvidia-uvm to controller

-------------------------------------------------------------------
Tue Mar  9 04:27:10 UTC 2021 - Luke Jones <luke@ljones.dev>

- Version 3.1.0
  + Add GU502LU led-modes
  + Graphics switching is now rebootless, the daemon will now restart the
    display-manager to switch modes instead. Caveats are:
    - There is no confirmation from the daemon, the program issuing the command
      must confirm the request.
    - systemd only
  + Laptops with dedicated Nvidia mode:
    - You still must reboot for the bios to switch modes
    - On boot if dedicated mode is active then asusd will update the required configs
      to put display-manager in nvidia mode

-------------------------------------------------------------------
Mon Feb 22 06:06:06 UTC 2020 - Luke Jones <luke@ljones.dev>

- Version 3.0.1
  + G531GD led modes

-------------------------------------------------------------------
Tue Feb 14 13:13:13 UTC 2020 - Luke Jones <luke@ljones.dev>

- Version 3.0.0
  + Write set+apply after each array in multizone
  + Remove misc bad logic
  + Use same code path as 0x1866 device to configure led support for 0x1854 device
  + Remove duplicate code
  + Set correct speeds for multizone
  + Remove dbus crate in favour of zbus. This removes the external dbus lib requirement.
  + Huge internal refactor
  + BREAKING CHANGE: Anime code refactor. DBUS method names have changed
  + Cleanup fan and cpu control + configs

-------------------------------------------------------------------
Tue Jan 26 13:13:13 UTC 2020 - Luke Jones <luke@ljones.dev>

- Version 2.2.1
  + fix CLI feedback for reboot/restartx. Update readme
  + dracut force driver include for nvidia dedicated
  + change fan-mode CLI tag

-------------------------------------------------------------------
Tue Jan 26 13:13:13 UTC 2020 - Luke Jones <luke@ljones.dev>

- Version 2.2.0
  + dbus method for 'supported functions'
  + add dedicated gfx safety
  + bring ctrl-gfx back in to main control for better integration
  + safely upgrade config files

-------------------------------------------------------------------
Sun Jan 10 13:13:13 UTC 2020 - Luke Jones <luke@ljones.dev>

- Version 2.1.2
  + Adjust gfx controller to assume that the graphics driver is
    loaded if the mode is set for nvidia/hybrid

-------------------------------------------------------------------
Sat Jan 09 13:13:13 UTC 2020 - Luke Jones <luke@ljones.dev>

- Version 2.1.1
  + Update dependencies

-------------------------------------------------------------------
Sun Oct 25 03:31:14 UTC 2020 - Luke Jones <luke@ljones.dev>

- Version 2.1.0
  + Option to turn off AniMe display (@asere)
  + Change option -k to show current LED bright (@asere)
  + Correctly disable GFX control via config
  + Panic and exit if config can't be parsed
  + Add DBUS method to toggle to next fan/thermal profile
  + Add DBUS method to toggle to next/prev Aura mode

-------------------------------------------------------------------
Tue Sep 29 08:34:09 UTC 2020 - Luke Jones <luke@ljones.dev>

- Version 2.0.5
  + Bugfixes

-------------------------------------------------------------------
Wed Sep 23 21:08:11 UTC 2020 - Luke Jones <luke@ljones.dev>

- Version 2.0.4
  + Better and more verbose error handling and logging in many places
  + Fix timeout for client waiting on reply for graphics switching

-------------------------------------------------------------------
Wed Sep 23 08:55:22 UTC 2020 - Luke Jones <luke@ljones.dev>

- Version 2.0.3
  + Moar bugfixes to prevent crashes

-------------------------------------------------------------------
Wed Sep 23 01:53:50 UTC 2020 - Luke Jones <luke@ljones.dev>

- Version 2.0.2
- graphics options via CLI are now a command block:
  + `asusctl graphics`
  + -m Mode <nvidia, hybrid, compute, integrated>
  + -g Get current mode
  + -p Get current power mode (nvidia)
  + -f Force reboot or restart display manager without confirmation
- Lots of other improvements

-------------------------------------------------------------------
Mon Sep 21 09:18:14 UTC 2020 - Luke Jones <luke@ljones.dev>

- Version 2.0.1
  + Small fix to CLI and notifs for GFX switch

-------------------------------------------------------------------
Sun Sep 20 23:14:17 UTC 2020 - Luke Jones <luke@ljones.dev>

- Version 2.0.0
  + Working gfx modes <iGPU only, dGPU only, or hybrid>
  + Add signal for gfx vendor change and make CLI wait for signal
  + Add polling for led brightness to save to config
  + Move daemon to zbus crate
  + dbus client refactor
  + Further dbus methods and updates
  + Add basic notification user daemon and systemd service

-------------------------------------------------------------------
Thu Sep 10 10:54:25 UTC 2020 - Luke Jones <luke@ljones.dev>

- Version 1.1.2
  + Bump rog-fan-curve to new versiont to support GA401IV

-------------------------------------------------------------------
Thu Sep 10 10:01:28 UTC 2020 - Luke Jones <luke@ljones.dev>

- Fix AMD turbo setting

-------------------------------------------------------------------
Thu Sep 10 00:00:42 UTC 2020 - Luke Jones <luke@ljones.dev>

- Version 1.1.0
  + Uses string instead of debug print for some errors
  + Add interface num arg for LED controller (should help support
    older laptops better)
  + Some slightly better error messages
  + Fix an idiotic mistake in `for i in 0..2.. if i > 0` -_-
  + Remove "unsupported" warning on laptop ctrl
  + Silence warning about AniMe not existing
  + Adjust the turbo-toggle CLI arg
  + Version bump for new release with fancurves (thanks @Yarn)

-------------------------------------------------------------------
Fri Aug 28 10:24:01 UTC 2020 - Luke Jones <luke@ljones.dev>

- Release bump due to a dependency having to be reverted to an
  older version because of ancient compilers in fedora and ubuntu.

-------------------------------------------------------------------
Fri Aug 28 09:13:03 UTC 2020 - Luke Jones <luke@ljones.dev>

- Version 1.0.3
  + Fix issues with trying to start while device nodes unavailable

-------------------------------------------------------------------
Tue Aug 25 03:00:58 UTC 2020 - Luke Jones <luke@ljones.dev>

- Improved spec file for RPM and DEB generation

-------------------------------------------------------------------
Sat Aug 15 08:22:40 UTC 2020 - Luke Jones <luke@ljones.dev>

- Initial build

Places

File asusctl.changes of Package asusctl (Revision fb50e88da1b48559d1b8a1e259ff2cb3)

Places