File uyuni-configfiles-sync of Package server-image

Overview Repositories Revisions Requests Users Attributes Meta

File uyuni-configfiles-sync of Package server-image (Revision ba6fc58d03026afb7ebcb9b29fc95f7d)

Currently displaying revision ba6fc58d03026afb7ebcb9b29fc95f7d , Show latest

#!/bin/bash
#
# Uyuni config files defaults synchronization tool
#
# 1) The "init" command needs to run during container buildtime.
# This will create the backups and create a random ".buildhash"
# which will be later stored at SYSCONFIG_FILE during 'sync'
# command to identify if there is an upgrade of the container image.
# (backups only packaged files on the persistent directories to initialize)
#
# 2) During "sync" command, this tool checks for differences between
# the stored files and the actual files stored in the previously
# initializated persitent volumes.
# If changes are detected, the tool determines if those are caused by
# either:
#   a) Upgrade of the container image (new version)
#   b) Local changes made by the users
#
# The tool won't delete any files in the persistent volumes, and will
# create "rpmsave" or "rpmnew" according to what is defined for that
# file in its RPM SPEC.
#
# As a last step during "sync", this tool takes care of running the
# RPM scriptlets for the packages which provides files to the persistent
# volumes, simulating an RPM upgrade, so necessary actions than an RPM
# upgrade bring can be also performed.
#
# 3) The "sync" command is automatically triggered during container startup,
# but once the "sync" command has been executed in a container that runs a
# particular container image, then the "sync" is locked and won't be executed
# until the container image has changed, triggering the "sync" again for this
# new container image.
#
set -e

DEFAULTS_STORAGE="/etc/uyuni-configfiles-sync/"
SYSCONFIG_FILE="/etc/sysconfig/uyuni-configfiles-sync"

help() {
    printf "Uyuni config files defaults synchronization tool

Usage:
  uyuni-configfiles-sync [command]

Available Commands:
  init	Add persistent volume to track package and config files.
  list	List initializated persistent volumes environments.
  sync	Synchronize files to persistent volumes and run RPM scripts.
"
}

init() {
    PV=$(echo "$1/" | tr -s /)
    if [ ! -d $DEFAULTS_STORAGE ]; then
        mkdir $DEFAULTS_STORAGE
    fi
    if [ ! -f $DEFAULTS_STORAGE/.buildhash ]; then
        echo $RANDOM | sha256sum | head -c 64 > $DEFAULTS_STORAGE/.buildhash
    fi
    echo -n "Initializing environment for persistent volume $PV ... "
    TARGET="$DEFAULTS_STORAGE/$(echo $PV | sed 's/\//-/g')"
    mkdir -p $TARGET
    echo "$PV" > $TARGET/.pv
    # Calculate the packages that are owning the files under this path
    PKGNAMES=$(LANG=C rpm -q -qf $(find $PV) | egrep -v "^file .+ is not owned by any package" | sort -u)
    # Sync the package files (non-configuration and configuration files) to our storage
    for pkg in $PKGNAMES; do
        for cfgfile in $(rpm -ql $pkg | grep "^$PV"); do
            if [ -f $cfgfile ]; then
                echo ${cfgfile#"$PV"} | rsync -a --files-from=- --exclude={'*'} $PV $TARGET
            fi
        done
    done
    echo "done!"
}

sync_file() {
    SOURCE_FILE=$1
    TARGET_FILE=$2
    # Synchronize package and config files
    if echo $LIST_CONFIG_NO_REPLACE | egrep -q "( |^)$i( |$)"; then
        # Configuration (no replace) files
        echo "    - $TARGET_FILE - Contains modifications made by the user. Not replacing and saving new file content as rpmnew file"
        rsync -a $SOURCE_FILE $TARGET_FILE.rpmnew
    else
        # Config (replace) and rest of package files
        echo "    - $TARGET_FILE - Contains modifications made by the user. Replacing and saving old file content as rpmsave file"
        rsync -ab --suffix ".rpmsave" $SOURCE_FILE $TARGET_FILE
    fi
}

sync() {
    # We skip the sync if already triggered on this container
    if [ ! -f $DEFAULTS_STORAGE/.buildhash ]; then
        echo "Missing $DEFAULTS_STORAGE.buildhash file. You probably need to run 'init' command first. Skipping."
        exit
    elif [ -f $SYSCONFIG_FILE ] && [ "$(cat $DEFAULTS_STORAGE/.buildhash)" = "$(cat $SYSCONFIG_FILE)" ]; then
        echo "Skipping 'sync' as it was already executed on this container"
        exit
    fi
    echo "Synchronizing defaults for all initializated environments"
    echo
    PACKAGES_ALL=""
    for PV_DIR in $(ls $DEFAULTS_STORAGE | grep -v "^\.buildhash$"); do
        SOURCES=$(echo "$DEFAULTS_STORAGE/$PV_DIR/" | tr -s /)
        PV=$(cat $SOURCES/.pv)
        PKGNAMES=$(LANG=C rpm -q -qf $(find $PV) | egrep -v "^file .+ is not owned by any package" | sort -u)
        PACKAGES_ALL=$(echo -e "$PACKAGES_ALL\n$PKGNAMES")
        echo "- Processing pv: $PV"
        echo -n "  * Getting information for files to synchronize ... "
        LIST_CONFIG_NO_REPLACE=""
        LIST_CONFIG_REPLACE=""
        LIST_ALL_FILES_FULL_PATH=$(rpm -ql $PKGNAMES | grep "^$PV")
        LIST_ALL_FILES_REL_PATH="${LIST_ALL_FILES_FULL_PATH//$PV/}"
        # For each config file, we check the noreplace flag
        for cfgfile in $(rpm -q --configfiles $PKGNAMES | grep "^$PV"); do
            FILEFLAG=$(rpm -q --qf '[%{filenames}: %{fileflags}\n]' $PKGNAMES | egrep "^$cfgfile: .+" | cut -d":" -f2)
            if [ "$((FILEFLAG & 16))" = "16" ]; then
                LIST_CONFIG_NO_REPLACE="$LIST_CONFIG_NO_REPLACE ${cfgfile#"$PV"}"
            else
                LIST_CONFIG_REPLACE="$LIST_CONFIG_REPLACE ${cfgfile#"$PV"}"
            fi
        done
        echo "done!"

echo -n "  * Syncing non configuration files ... "
        RSYNC_ARGS=""
        # We exclude configuration files as they are going to be processed later
        # Exclude args, if apply, must has formatted as: {'file1','file2'}
        LIST_FILES_TO_EXCLUDE="'$(echo $LIST_CONFIG_REPLACE $LIST_CONFIG_NO_REPLACE | sed "s/ /','/g")'"
        if [ ! "$LIST_FILES_TO_EXCLUDE" = "''" ]; then
            RSYNC_ARGS="--exclude={$LIST_FILES_TO_EXCLUDE}"
        fi
        # Synchronize package files from source excluding (configuration files)
        CMD="rsync -ab $RSYNC_ARGS --exclude=".pv" --suffix ".rpmsave" $SOURCES $PV"
        eval $CMD
        echo "done!"

echo "  * Syncing configuration files ..."
        for i in $(echo $LIST_CONFIG_NO_REPLACE $LIST_CONFIG_REPLACE); do
            SOURCE_FILE=$(echo $SOURCES/$i | tr -s /)
            TARGET_FILE=$(echo $PV/$i | tr -s /)
            # Some files listed in the package may be removed, we don't want to recreate them, so we skip.
            if [ ! -f $SOURCE_FILE ]; then
                echo "    - WARNING: $TARGET_FILE is listed as beloging to a package but it was not existing at the time the persistent volume was initializated. Skipping."
                continue
            fi
            # Check possible changes to sync. Excluding changes on creation/modification times
            # We need to parse output:
            #   - no output or line starting with "." -> nothing to sync
            #   - else -> changes to sync
            CHECK_CHANGES=$(rsync --dry-run -a --itemize-changes --size-only $SOURCE_FILE $TARGET_FILE)
            if [ -z "$CHECK_CHANGES" ] || echo $CHECK_CHANGES | grep -q "^\."; then
                # No changes are needed for this file
                echo "    - $TARGET_FILE - No changes needed"
            else
                # Changes are needed for this file.
                # Now we need to determine if changes are coming from a package upgrade
                # or local changes made by user in order to determine the sync strategy.
                if [ -f $TARGET_FILE ]; then
                    # Target file does exist in persistent volume
                    # We check stored checksum to know if changes are from coming by the user or from a package upgrade
                    # NOTE: stored checksum file may not exist yet, when "sync" has been never executed yet (first start)
                    if [ -f $PV/.defaults_checksums ]; then
                        CHECKSUM=$(grep "  $SOURCE_FILE$" $PV/.defaults_checksums | awk '{print $1}')
                    else
                        CHECKSUM=""
                    fi
                    if [ ! -z "$CHECKSUM" ] && [ "$CHECKSUM" = "$(sha256sum $SOURCE_FILE | awk '{print $1}')" ]; then
                        # Checksum are equal between new defaults and cached defaults
                        # this mean changes are made by the user
                        sync_file $SOURCE_FILE $TARGET_FILE
                    elif [ ! -z "$CHECKSUM" ] && [ ! "$CHECKSUM" = "$(sha256sum $SOURCE_FILE | awk '{print $1}')" ]; then
                        # Checksum are different between new defaults and cached defaults checksums
                        # Meaning changes in file due an upgrade or local user changes
                        if [ "$CHECKSUM" = "$(sha256sum $TARGET_FILE | awk '{print $1}')" ]; then
                            # Checksum is equal between cached defaults and target file
                            # Meaning no local changes and changes are due an upgrade
                            echo "    - $TARGET_FILE - No local modifications but new changes coming from a package upgrade, replacing file"
                            rsync -a $SOURCE_FILE $TARGET_FILE
                        else
                            # Local changes made by the user.
                            sync_file $SOURCE_FILE $TARGET_FILE
                        fi
                    else
                        # First sync - no checksums stored yet. Syncing
                        sync_file $SOURCE_FILE $TARGET_FILE
                    fi
                else
                    # File does not exist - we synchronize it
                    echo "    - $TARGET_FILE - Does not exist, we synchronize it"
                    rsync -a $SOURCE_FILE $TARGET_FILE
                fi
            fi
        done

# Regenerate checksum cache for defaults
        rm $PV/.defaults_checksums &> /dev/null || :
        for i in $(echo $LIST_ALL_FILES_REL_PATH); do
            SOURCE_FILE=$(echo $SOURCES/$i | tr -s /)
            if [ -f "$SOURCE_FILE" ]; then
                sha256sum $SOURCE_FILE >> $PV/.defaults_checksums
            fi
        done
        echo "  * Completed"
        echo
    done

# Run RPM scriptslets simulating a package upgrade
    echo "- Running scriptlets for packages:"
    PACKAGES_ALL=$(echo "$PACKAGES_ALL" | sort -u)
    run_scripts "$PACKAGES_ALL"
    echo "  * Completed"

# We lock the sync so it cannot run until next upgrade of the container image
    cp $DEFAULTS_STORAGE/.buildhash $SYSCONFIG_FILE
}

run_scripts() {
    PACKAGE_NAMES=$1
    for PKG in $PACKAGE_NAMES; do
        echo "  * Running scripts for $PKG ..."
        # RPM scriptlets ordering:
        # https://docs.fedoraproject.org/en-US/packaging-guidelines/Scriptlets/#ordering
        PREIN_SCRIPT=$(rpm -q --qf "%{PREIN}" $PKG)
        if [ ! "$PREIN_SCRIPT" = "(none)" ]; then
            echo "$PREIN_SCRIPT" | DISABLE_RESTART_ON_UPDATE=1 sh -s -- 2
        fi
        POSTIN_SCRIPT=$(rpm -q --qf "%{POSTIN}" $PKG)
        if [ ! "$POSTIN_SCRIPT" = "(none)" ]; then
            echo "$POSTIN_SCRIPT" | DISABLE_RESTART_ON_UPDATE=1 sh -s -- 2
        fi
        PREUN_SCRIPT=$(rpm -q --qf "%{PREUN}" $PKG)
        if [ ! "$PREUN_SCRIPT" = "(none)" ]; then
            echo "$PREUN_SCRIPT" | DISABLE_RESTART_ON_UPDATE=1 sh -s -- 1
        fi
        POSTUN_SCRIPT=$(rpm -q --qf "%{POSTUN}" $PKG)
        if [ ! "$POSTUN_SCRIPT" = "(none)" ]; then
            echo "$POSTUN_SCRIPT" | DISABLE_RESTART_ON_UPDATE=1 sh -s -- 1
        fi
        POSTTRANS_SCRIPT=$(rpm -q --qf "%{POSTTRANS}" $PKG)
        if [ ! "$POSTTRANS_SCRIPT" = "(none)" ]; then
            echo "$POSTTRANS_SCRIPT" | DISABLE_RESTART_ON_UPDATE=1 sh -s -- 2
        fi
    done
}

list() {
    echo "List of initialized persistent volumes"
    echo "--------------------------------------"
    echo
    for pv in $(ls $DEFAULTS_STORAGE | grep -v "^\.buildhash$"); do
        SOURCES=$(echo "$DEFAULTS_STORAGE/$pv" | tr -s /)
        PV=$(cat $SOURCES/.pv)
        echo "$PV - $(find $SOURCES -type f | grep -v ".pv$" | wc -l) configuration and package files - $SOURCES/"
    done
}

if [ "$1" == "init" ] && [ -n "$2" ]; then
    PV=$2
    init $PV
elif [ "$1" == "sync" ]; then
    sync
elif [ "$1" == "list" ]; then
    list
else
    help
fi

Places

File uyuni-configfiles-sync of Package server-image (Revision ba6fc58d03026afb7ebcb9b29fc95f7d)

Places