Sign Up
Log In
Log In
or
Sign Up
Places
All Projects
Status Monitor
Collapse sidebar
No build reason found for SLE-Module-Python2:s390x
home:msmeissn:branches:hardware
wpa_supplicant
wpa_supplicant.changes
Overview
Repositories
Revisions
Requests
Users
Attributes
Meta
File wpa_supplicant.changes of Package wpa_supplicant
------------------------------------------------------------------- Fri Sep 20 10:37:22 UTC 2024 - Clemens Famulla-Conrad <cfamullaconrad@suse.com> - Revert "Mark authorization completed on driver indication during 4-way HS offload" because of WPA2-PSK/WPA-SAE connection problems with brcmfmac wifi hardware. (bsc#1230797) [+ Revert-Mark-authorization-completed-on-driver-indica.patch] ------------------------------------------------------------------- Wed Sep 11 14:44:58 UTC 2024 - Clemens Famulla-Conrad <cfamullaconrad@suse.com> - update to v2.11: * Wi-Fi Easy Connect - add support for DPP release 3 - allow Configurator parameters to be provided during config exchange * HE/IEEE 802.11ax/Wi-Fi 6 - various fixes * EHT/IEEE 802.11be/Wi-Fi 7 - add preliminary support * SAE: add support for fetching the password from a RADIUS server * support OpenSSL 3.0 API changes * support background radar detection and CAC with some additional drivers * support RADIUS ACL/PSK check during 4-way handshake (wpa_psk_radius=3) * EAP-SIM/AKA: support IMSI privacy * improve 4-way handshake operations - use Secure=1 in message 3 during PTK rekeying * OCV: do not check Frequency Segment 1 Channel Number for 160 MHz cases to avoid interoperability issues * support new SAE AKM suites with variable length keys * support new AKM for 802.1X/EAP with SHA384 * extend PASN support for secure ranging * FT: Use SHA256 to derive PMKID for AKM 00-0F-AC:3 (FT-EAP) - this is based on additional details being added in the IEEE 802.11 standard - the new implementation is not backwards compatible * improved ACS to cover additional channel types/bandwidths * extended Multiple BSSID support * fix beacon protection with FT protocol (incorrect BIGTK was provided) * support unsynchronized service discovery (USD) * add preliminary support for RADIUS/TLS * add support for explicit SSID protection in 4-way handshake (a mitigation for CVE-2023-52424; disabled by default for now, can be enabled with ssid_protection=1) * fix SAE H2E rejected groups validation to avoid downgrade attacks * use stricter validation for some RADIUS messages * a large number of other fixes, cleanup, and extensions - refresh patches: wpa_supplicant-dump-certificate-as-PEM-in-debug-mode.diff wpa_supplicant-sigusr1-changes-debuglevel.patch - drop patches: CVE-2023-52160.patch dbus-Fix-property-DebugShowKeys-and-DebugTimestamp.patch ------------------------------------------------------------------- Thu Feb 15 15:48:52 UTC 2024 - Clemens Famulla-Conrad <cfamullaconrad@suse.com> - Add CVE-2023-52160.patch - Bypassing WiFi Authentication (bsc#1219975) ------------------------------------------------------------------- Tue May 16 20:19:37 UTC 2023 - Callum Farmer <gmbr3@opensuse.org> - Change ctrl_interface from /var/run to %_rundir (/run) ------------------------------------------------------------------- Thu Sep 1 13:52:19 UTC 2022 - Stefan Schubert <schubi@suse.com> - Migration to /usr/etc: Saving user changed configuration files in /etc and restoring them while an RPM update. ------------------------------------------------------------------- Tue Jul 5 11:29:50 UTC 2022 - Clemens Famulla-Conrad <cfamullaconrad@suse.com> - Add dbus-Fix-property-DebugShowKeys-and-DebugTimestamp.patch (bsc#1201219) ------------------------------------------------------------------- Tue Jun 21 10:11:36 UTC 2022 - Stefan Schubert <schubi@suse.com> - Removed %config flag for files in /usr directory. ------------------------------------------------------------------- Tue Jun 21 07:29:22 UTC 2022 - Stefan Schubert <schubi@suse.com> - Moved logrotate files from user specific directory /etc/logrotate.d to vendor specific directory /usr/etc/logrotate.d. ------------------------------------------------------------------- Mon Jun 20 09:22:26 UTC 2022 - Clemens Famulla-Conrad <cfamullaconrad@suse.com> - Remove Revert-DBus-Add-sae-to-interface-key_mgmt-capabilities.patch Fixed in NetworkManager (glfo#NetworkManager/NetworkManager#a0988868). Wifi cards, wich do not support PMF/BIP ciphers, should not use SAE as key management. (bsc#1195312) ------------------------------------------------------------------- Wed Jun 8 14:18:27 UTC 2022 - Callum Farmer <gmbr3@opensuse.org> - Move the dbus-1 system.d file to /usr (bsc#1200342) ------------------------------------------------------------------- Sat Feb 5 09:28:52 UTC 2022 - Hans-Peter Jansen <hpj@urpla.net> - Apply Revert-DBus-Add-sae-to-interface-key_mgmt-capabilities.patch to fix connect with AVM FB, if WPA3 transition mode is activated, e.g. Wifi -> Security: is WPA2 + WPA3, alt. switch to WPA2 (CCMP) (bsc#1195312) ------------------------------------------------------------------- Tue Feb 1 19:41:41 UTC 2022 - Dirk Müller <dmueller@suse.com> - drop restore-old-dbus-interface.patch, wicked has been switching to the new dbus interface in version 0.6.66. - drop wpa_supplicant-getrandom.patch : glibc has been updated so the getrandom() wrapper is now there - config: * enable QCA vendor extensions to nl80211 * enable EAP-EKE * Support HT overrides * WPA3-Enterprise * TLS v1.1 and TLS v1.2 * Fast Session Transfer (FST) * Automatic Channel Selection * Multi Band Operation * Fast Initial Link Setup * Mesh Networking (IEEE 802.11s) ------------------------------------------------------------------- Mon Jan 31 19:42:36 UTC 2022 - Dirk Müller <dmueller@suse.com> - config: * Reenable Fast BSS Transition (likely fixing bsc#1195312) * Enable OCV, security feature that prevents MITM multi-channel attacks * Enable OWE for better hotspot support ------------------------------------------------------------------- Sun Jan 23 15:33:37 UTC 2022 - Dirk Müller <dmueller@suse.com> - update to 2.10.0: * SAE changes - improved protection against side channel attacks [https://w1.fi/security/2022-1/] - added support for the hash-to-element mechanism (sae_pwe=1 or sae_pwe=2); this is currently disabled by default, but will likely get enabled by default in the future - fixed PMKSA caching with OKC - added support for SAE-PK * EAP-pwd changes - improved protection against side channel attacks [https://w1.fi/security/2022-1/] * fixed P2P provision discovery processing of a specially constructed invalid frame [https://w1.fi/security/2021-1/] * fixed P2P group information processing of a specially constructed invalid frame [https://w1.fi/security/2020-2/] * fixed PMF disconnection protection bypass in AP mode [https://w1.fi/security/2019-7/] * added support for using OpenSSL 3.0 * increased the maximum number of EAP message exchanges (mainly to support cases with very large certificates) * fixed various issues in experimental support for EAP-TEAP peer * added support for DPP release 2 (Wi-Fi Device Provisioning Protocol) * a number of MKA/MACsec fixes and extensions * added support for SAE (WPA3-Personal) AP mode configuration * added P2P support for EDMG (IEEE 802.11ay) channels * fixed EAP-FAST peer with TLS GCM/CCM ciphers * improved throughput estimation and BSS selection * dropped support for libnl 1.1 * added support for nl80211 control port for EAPOL frame TX/RX * fixed OWE key derivation with groups 20 and 21; this breaks backwards compatibility for these groups while the default group 19 remains backwards compatible * added support for Beacon protection * added support for Extended Key ID for pairwise keys * removed WEP support from the default build (CONFIG_WEP=y can be used to enable it, if really needed) * added a build option to remove TKIP support (CONFIG_NO_TKIP=y) * added support for Transition Disable mechanism to allow the AP to automatically disable transition mode to improve security * extended D-Bus interface * added support for PASN * added a file-based backend for external password storage to allow secret information to be moved away from the main configuration file without requiring external tools * added EAP-TLS peer support for TLS 1.3 (disabled by default for now) * added support for SCS, MSCS, DSCP policy * changed driver interface selection to default to automatic fallback to other compiled in options * a large number of other fixes, cleanup, and extensions - drop wpa_supplicant-p2p_iname_size.diff, CVE-2021-30004.patch, CVE-2021-27803.patch, CVE-2021-0326.patch, CVE-2019-16275.patch: upstream - refresh config from 2.10 defconfig, re-enable CONFIG_WEP ------------------------------------------------------------------- Mon Jan 10 08:27:51 UTC 2022 - Johannes Segitz <jsegitz@suse.com> - Added hardening to systemd service(s) (bsc#1181400). Modified: * wpa_supplicant.service ------------------------------------------------------------------- Tue Apr 6 14:51:18 UTC 2021 - Clemens Famulla-Conrad <cfamullaconrad@suse.com> - Add CVE-2021-30004.patch -- forging attacks may occur because AlgorithmIdentifier parameters are mishandled in tls/pkcs1.c and tls/x509v3.c (bsc#1184348) ------------------------------------------------------------------- Wed Mar 3 15:31:02 UTC 2021 - Clemens Famulla-Conrad <cfamullaconrad@suse.com> - Fix systemd device ready dependencies in wpa_supplicant@.service file. (see: https://forums.opensuse.org/showthread.php/547186-wpa_supplicant-service-fails-on-boot-succeeds-on-restart?p=2982844#post2982844) ------------------------------------------------------------------- Sat Feb 27 23:14:13 UTC 2021 - Clemens Famulla-Conrad <cfamullaconrad@suse.com> - Add CVE-2021-27803.patch -- P2P provision discovery processing vulnerability (bsc#1182805) ------------------------------------------------------------------- Thu Feb 4 12:27:02 UTC 2021 - Clemens Famulla-Conrad <cfamullaconrad@suse.com> - Add CVE-2021-0326.patch -- P2P group information processing vulnerability (bsc#1181777) ------------------------------------------------------------------- Tue Oct 6 15:20:18 UTC 2020 - Florian <sp1ritCS@protonmail.com> - Add wpa_supplicant-p2p_iname_size.diff -- Limit P2P_DEVICE name to appropriate ifname size (https://patchwork.ozlabs.org/project/hostap/patch/20200825062902.124600-1-benjamin@sipsolutions.net/) ------------------------------------------------------------------- Tue Sep 22 13:06:32 UTC 2020 - Clemens Famulla-Conrad <cfamullaconrad@suse.com> - Fix spec file for SLE12, use make %{?_smp_mflags} instead of %make_build ------------------------------------------------------------------- Tue Sep 22 08:29:15 UTC 2020 - Jonathan Kang <songchuan.kang@suse.com> - Enable SAE support(jsc#SLE-14992). ------------------------------------------------------------------- Thu Apr 23 21:51:17 UTC 2020 - Clemens Famulla-Conrad <cfamullaconrad@suse.com> - Add CVE-2019-16275.patch -- AP mode PMF disconnection protection bypass (bsc#1150934) ------------------------------------------------------------------- Fri Apr 17 08:37:34 UTC 2020 - Bernhard Wiedemann <bwiedemann@suse.com> - Add restore-old-dbus-interface.patch to fix wicked wlan (boo#1156920) - Restore fi.epitest.hostap.WPASupplicant.service (bsc#1167331) ------------------------------------------------------------------- Thu Mar 26 16:03:38 UTC 2020 - Clemens Famulla-Conrad <cfamullaconrad@suse.com> - With v2.9 fi.epitest.hostap.WPASupplicant.service is obsolete (bsc#1167331) ------------------------------------------------------------------- Thu Mar 26 10:02:31 UTC 2020 - Илья Индиго <ilya@ilya.pp.ua> - Change wpa_supplicant.service to ensure wpa_supplicant gets started before network. Fix WLAN config on boot with wicked. (boo#1166933) ------------------------------------------------------------------- Fri Feb 28 12:42:14 UTC 2020 - Tomáš Chvátal <tchvatal@suse.com> - Adjust the service to start after network.target wrt bsc#1165266 ------------------------------------------------------------------- Mon Nov 4 10:57:57 UTC 2019 - Tomáš Chvátal <tchvatal@suse.com> - Update to 2.9 release: * SAE changes - disable use of groups using Brainpool curves - improved protection against side channel attacks [https://w1.fi/security/2019-6/] * EAP-pwd changes - disable use of groups using Brainpool curves - allow the set of groups to be configured (eap_pwd_groups) - improved protection against side channel attacks [https://w1.fi/security/2019-6/] * fixed FT-EAP initial mobility domain association using PMKSA caching (disabled by default for backwards compatibility; can be enabled with ft_eap_pmksa_caching=1) * fixed a regression in OpenSSL 1.1+ engine loading * added validation of RSNE in (Re)Association Response frames * fixed DPP bootstrapping URI parser of channel list * extended EAP-SIM/AKA fast re-authentication to allow use with FILS * extended ca_cert_blob to support PEM format * improved robustness of P2P Action frame scheduling * added support for EAP-SIM/AKA using anonymous@realm identity * fixed Hotspot 2.0 credential selection based on roaming consortium to ignore credentials without a specific EAP method * added experimental support for EAP-TEAP peer (RFC 7170) * added experimental support for EAP-TLS peer with TLS v1.3 * fixed a regression in WMM parameter configuration for a TDLS peer * fixed a regression in operation with drivers that offload 802.1X 4-way handshake * fixed an ECDH operation corner case with OpenSSL * SAE changes - added support for SAE Password Identifier - changed default configuration to enable only groups 19, 20, 21 (i.e., disable groups 25 and 26) and disable all unsuitable groups completely based on REVmd changes - do not regenerate PWE unnecessarily when the AP uses the anti-clogging token mechanisms - fixed some association cases where both SAE and FT-SAE were enabled on both the station and the selected AP - started to prefer FT-SAE over SAE AKM if both are enabled - started to prefer FT-SAE over FT-PSK if both are enabled - fixed FT-SAE when SAE PMKSA caching is used - reject use of unsuitable groups based on new implementation guidance in REVmd (allow only FFC groups with prime >= 3072 bits and ECC groups with prime >= 256) - minimize timing and memory use differences in PWE derivation [https://w1.fi/security/2019-1/] (CVE-2019-9494, bsc#1131868) * EAP-pwd changes - minimize timing and memory use differences in PWE derivation [https://w1.fi/security/2019-2/] (CVE-2019-9495, bsc#1131870) - verify server scalar/element [https://w1.fi/security/2019-4/] (CVE-2019-9497, CVE-2019-9498, CVE-2019-9499, bsc#1131874, bsc#1131872, bsc#1131871, bsc#1131644) - fix message reassembly issue with unexpected fragment [https://w1.fi/security/2019-5/] (CVE-2019-11555, bsc#1133640) - enforce rand,mask generation rules more strictly - fix a memory leak in PWE derivation - disallow ECC groups with a prime under 256 bits (groups 25, 26, and 27) - SAE/EAP-pwd side-channel attack update [https://w1.fi/security/2019-6/] (CVE-2019-13377, bsc#1144443) * fixed CONFIG_IEEE80211R=y (FT) build without CONFIG_FILS=y * Hotspot 2.0 changes - do not indicate release number that is higher than the one AP supports - added support for release number 3 - enable PMF automatically for network profiles created from credentials * fixed OWE network profile saving * fixed DPP network profile saving * added support for RSN operating channel validation (CONFIG_OCV=y and network profile parameter ocv=1) * added Multi-AP backhaul STA support * fixed build with LibreSSL * number of MKA/MACsec fixes and extensions * extended domain_match and domain_suffix_match to allow list of values * fixed dNSName matching in domain_match and domain_suffix_match when using wolfSSL * started to prefer FT-EAP-SHA384 over WPA-EAP-SUITE-B-192 AKM if both are enabled * extended nl80211 Connect and external authentication to support SAE, FT-SAE, FT-EAP-SHA384 * fixed KEK2 derivation for FILS+FT * extended client_cert file to allow loading of a chain of PEM encoded certificates * extended beacon reporting functionality * extended D-Bus interface with number of new properties * fixed a regression in FT-over-DS with mac80211-based drivers * OpenSSL: allow systemwide policies to be overridden * extended driver flags indication for separate 802.1X and PSK 4-way handshake offload capability * added support for random P2P Device/Interface Address use * extended PEAP to derive EMSK to enable use with ERP/FILS * extended WPS to allow SAE configuration to be added automatically for PSK (wps_cred_add_sae=1) * removed support for the old D-Bus interface (CONFIG_CTRL_IFACE_DBUS) * extended domain_match and domain_suffix_match to allow list of values * added a RSN workaround for misbehaving PMF APs that advertise IGTK/BIP KeyID using incorrect byte order * fixed PTK rekeying with FILS and FT * fixed WPA packet number reuse with replayed messages and key reinstallation [https://w1.fi/security/2017-1/] (CVE-2017-13077, CVE-2017-13078, CVE-2017-13079, CVE-2017-13080, CVE-2017-13081, CVE-2017-13082, CVE-2017-13086, CVE-2017-13087, CVE-2017-13088) * fixed unauthenticated EAPOL-Key decryption in wpa_supplicant [https://w1.fi/security/2018-1/] (CVE-2018-14526) * added support for FILS (IEEE 802.11ai) shared key authentication * added support for OWE (Opportunistic Wireless Encryption, RFC 8110; and transition mode defined by WFA) * added support for DPP (Wi-Fi Device Provisioning Protocol) * added support for RSA 3k key case with Suite B 192-bit level * fixed Suite B PMKSA caching not to update PMKID during each 4-way handshake * fixed EAP-pwd pre-processing with PasswordHashHash * added EAP-pwd client support for salted passwords * fixed a regression in TDLS prohibited bit validation * started to use estimated throughput to avoid undesired signal strength based roaming decision * MACsec/MKA: - new macsec_linux driver interface support for the Linux kernel macsec module - number of fixes and extensions * added support for external persistent storage of PMKSA cache (PMKSA_GET/PMKSA_ADD control interface commands; and MESH_PMKSA_GET/MESH_PMKSA_SET for the mesh case) * fixed mesh channel configuration pri/sec switch case * added support for beacon report * large number of other fixes, cleanup, and extensions * added support for randomizing local address for GAS queries (gas_rand_mac_addr parameter) * fixed EAP-SIM/AKA/AKA' ext auth cases within TLS tunnel * added option for using random WPS UUID (auto_uuid=1) * added SHA256-hash support for OCSP certificate matching * fixed EAP-AKA' to add AT_KDF into Synchronization-Failure * fixed a regression in RSN pre-authentication candidate selection * added option to configure allowed group management cipher suites (group_mgmt network profile parameter) * removed all PeerKey functionality * fixed nl80211 AP and mesh mode configuration regression with Linux 4.15 and newer * added ap_isolate configuration option for AP mode * added support for nl80211 to offload 4-way handshake into the driver * added support for using wolfSSL cryptographic library * SAE - added support for configuring SAE password separately of the WPA2 PSK/passphrase - fixed PTK and EAPOL-Key integrity and key-wrap algorithm selection for SAE; note: this is not backwards compatible, i.e., both the AP and station side implementations will need to be update at the same time to maintain interoperability - added support for Password Identifier - fixed FT-SAE PMKID matching * Hotspot 2.0 - added support for fetching of Operator Icon Metadata ANQP-element - added support for Roaming Consortium Selection element - added support for Terms and Conditions - added support for OSEN connection in a shared RSN BSS - added support for fetching Venue URL information * added support for using OpenSSL 1.1.1 * FT - disabled PMKSA caching with FT since it is not fully functional - added support for SHA384 based AKM - added support for BIP ciphers BIP-CMAC-256, BIP-GMAC-128, BIP-GMAC-256 in addition to previously supported BIP-CMAC-128 - fixed additional IE inclusion in Reassociation Request frame when using FT protocol - Drop merged patches: * rebased-v2.6-0001-hostapd-Avoid-key-reinstallation-in-FT-handshake.patch * rebased-v2.6-0002-Prevent-reinstallation-of-an-already-in-use-group-ke.patch * rebased-v2.6-0003-Extend-protection-of-GTK-IGTK-reinstallation-of-WNM-.patch * rebased-v2.6-0004-Prevent-installation-of-an-all-zero-TK.patch * rebased-v2.6-0005-Fix-PTK-rekeying-to-generate-a-new-ANonce.patch * rebased-v2.6-0006-TDLS-Reject-TPK-TK-reconfiguration.patch * rebased-v2.6-0007-WNM-Ignore-WNM-Sleep-Mode-Response-without-pending-r.patch * rebased-v2.6-0008-FT-Do-not-allow-multiple-Reassociation-Response-fram.patch * rebased-v2.6-0009-WPA-Ignore-unauthenticated-encrypted-EAPOL-Key-data.patch * wpa_supplicant-bnc-1099835-fix-private-key-password.patch * wpa_supplicant-bnc-1099835-clear-default_passwd_cb.patch * wpa_supplicant-log-file-permission.patch * wpa_supplicant-log-file-cloexec.patch * wpa_supplicant-git-fa67debf4c6ddbc881a212b175faa6d5d0d90c8c.patch * wpa_supplicant-git-f5b74b966c942feb95a8ddbb7d130540b15b796d.patch - Rebase patches: * wpa_supplicant-getrandom.patch ------------------------------------------------------------------- Mon Jul 29 12:08:59 UTC 2019 - Илья Индиго <ilya@ilya.pp.ua> - Refresh spec-file via spec-cleaner and manual optimizations. * Change URL and Source0 to actual project homepage. * Remove macro %{?systemd_requires} and rm (not needed). * Add %autopatch macro. * Add %make_build macro. - Chenged patch wpa_supplicant-flush-debug-output.patch (to -p1). - Changed service-files for start after network (systemd-networkd). ------------------------------------------------------------------- Fri Nov 2 09:50:48 UTC 2018 - Илья Индиго <ilya@ilya.pp.ua> - Refresh spec-file: add %license tag. ------------------------------------------------------------------- Tue Oct 16 06:45:59 UTC 2018 - Karol Babioch <kbabioch@suse.com> - Renamed patches: - wpa-supplicant-log-file-permission.patch -> wpa_supplicant-log-file-permission.patch - wpa-supplicant-log-file-cloexec.patch -> wpa_supplicant-log-file-cloexec.patch - wpa_supplicant-log-file-permission.patch: Using O_WRONLY flag - Enabled timestamps in log files (bsc#1080798) ------------------------------------------------------------------- Mon Oct 15 16:20:25 CEST 2018 - ro@suse.de - compile eapol_test binary to allow testing via radius proxy and server (note: this does not match CONFIG_EAPOL_TEST which sets -Werror and activates an assert call inside the code of wpa_supplicant) (bsc#1111873), (fate#326725) - add patch to fix wrong operator precedence in ieee802_11.c wpa_supplicant-git-fa67debf4c6ddbc881a212b175faa6d5d0d90c8c.patch - add patch to avoid redefinition of __bitwise macro wpa_supplicant-git-f5b74b966c942feb95a8ddbb7d130540b15b796d.patch ------------------------------------------------------------------- Fri Oct 12 06:55:06 UTC 2018 - Karol Babioch <kbabioch@suse.com> - Added wpa-supplicant-log-file-permission.patch: Fixes the default file permissions of the debug log file to more sane values, i.e. it is no longer world-readable (bsc#1098854). - Added wpa-supplicant-log-file-cloexec.patch: Open the debug log file with O_CLOEXEC, which will prevent file descriptor leaking to child processes (bsc#1098854). ------------------------------------------------------------------- Thu Oct 11 11:58:33 UTC 2018 - Karol Babioch <kbabioch@suse.com> - Added rebased-v2.6-0009-WPA-Ignore-unauthenticated-encrypted-EAPOL-Key-data.patch: Ignore unauthenticated encrypted EAPOL-Key data (CVE-2018-14526, bsc#1104205). ------------------------------------------------------------------- Fri Sep 21 09:15:34 UTC 2018 - Karol Babioch <kbabioch@suse.com> - Enabled PWD as EAP method. This allows for password-based authentication, which is easier to setup than most of the other methods, and is used by the Eduroam network (bsc#1109209). ------------------------------------------------------------------- Fri Jul 20 13:48:52 CEST 2018 - ro@suse.de - add two patches from upstream to fix reading private key passwords from the configuration file (bsc#1099835) - add patch for git 89971d8b1e328a2f79699c953625d1671fd40384 wpa_supplicant-bnc-1099835-clear-default_passwd_cb.patch - add patch for git f665c93e1d28fbab3d9127a8c3985cc32940824f wpa_supplicant-bnc-1099835-fix-private-key-password.patch ------------------------------------------------------------------- Mon Oct 16 13:32:07 UTC 2017 - meissner@suse.com - Fix KRACK attacks (bsc#1056061, CVE-2017-13078, CVE-2017-13079, CVE-2017-13080, CVE-2017-13081, CVE-2017-13087, CVE-2017-13088): - rebased-v2.6-0001-hostapd-Avoid-key-reinstallation-in-FT-handshake.patch - rebased-v2.6-0002-Prevent-reinstallation-of-an-already-in-use-group-ke.patch - rebased-v2.6-0003-Extend-protection-of-GTK-IGTK-reinstallation-of-WNM-.patch - rebased-v2.6-0004-Prevent-installation-of-an-all-zero-TK.patch - rebased-v2.6-0005-Fix-PTK-rekeying-to-generate-a-new-ANonce.patch - rebased-v2.6-0006-TDLS-Reject-TPK-TK-reconfiguration.patch - rebased-v2.6-0007-WNM-Ignore-WNM-Sleep-Mode-Response-without-pending-r.patch - rebased-v2.6-0008-FT-Do-not-allow-multiple-Reassociation-Response-fram.patch ------------------------------------------------------------------- Fri Apr 21 11:02:18 UTC 2017 - obs@botter.cc - fix wpa_supplicant-sigusr1-changes-debuglevel.patch to match eloop_signal_handler type (needed to build eapol_test via config) ------------------------------------------------------------------- Fri Dec 23 11:12:05 UTC 2016 - dwaas@suse.com - Added .service files that accept interfaces as %i arguments so it's possible to call the daemon with: "systemctl start wpa_supplicant@$INTERFACE_NAME.service" (like openvpn for example) ------------------------------------------------------------------- Thu Oct 6 15:42:23 UTC 2016 - meissner@suse.com - updated to 2.6 / 2016-10-02 * fixed WNM Sleep Mode processing when PMF is not enabled [http://w1.fi/security/2015-6/] (CVE-2015-5310 bsc#952254) * fixed EAP-pwd last fragment validation [http://w1.fi/security/2015-7/] (CVE-2015-5315 bsc#953115) * fixed EAP-pwd unexpected Confirm message processing [http://w1.fi/security/2015-8/] (CVE-2015-5316 bsc#953115) * fixed WPS configuration update vulnerability with malformed passphrase [http://w1.fi/security/2016-1/] (CVE-2016-4476 bsc#978172) * fixed configuration update vulnerability with malformed parameters set over the local control interface [http://w1.fi/security/2016-1/] (CVE-2016-4477 bsc#978175) * fixed TK configuration to the driver in EAPOL-Key 3/4 retry case * extended channel switch support for P2P GO * started to throttle control interface event message bursts to avoid issues with monitor sockets running out of buffer space * mesh mode fixes/improvements - generate proper AID for peer - enable WMM by default - add VHT support - fix PMKID derivation - improve robustness on various exchanges - fix peer link counting in reconnect case - improve mesh joining behavior - allow DTIM period to be configured - allow HT to be disabled (disable_ht=1) - add MESH_PEER_ADD and MESH_PEER_REMOVE commands - add support for PMKSA caching - add minimal support for SAE group negotiation - allow pairwise/group cipher to be configured in the network profile - use ieee80211w profile parameter to enable/disable PMF and derive a separate TX IGTK if PMF is enabled instead of using MGTK incorrectly - fix AEK and MTK derivation - remove GTKdata and IGTKdata from Mesh Peering Confirm/Close - note: these changes are not fully backwards compatible for secure (RSN) mesh network * fixed PMKID derivation with SAE * added support for requesting and fetching arbitrary ANQP-elements without internal support in wpa_supplicant for the specific element (anqp[265]=<hexdump> in "BSS <BSSID>" command output) * P2P - filter control characters in group client device names to be consistent with other P2P peer cases - support VHT 80+80 MHz and 160 MHz - indicate group completion in P2P Client role after data association instead of already after the WPS provisioning step - improve group-join operation to use SSID, if known, to filter BSS entries - added optional ssid=<hexdump> argument to P2P_CONNECT for join case - added P2P_GROUP_MEMBER command to fetch client interface address * P2PS - fix follow-on PD Response behavior - fix PD Response generation for unknown peer - fix persistent group reporting - add channel policy to PD Request - add group SSID to the P2PS-PROV-DONE event - allow "P2P_CONNECT <addr> p2ps" to be used without specifying the default PIN * BoringSSL - support for OCSP stapling - support building of h20-osu-client * D-Bus - add ExpectDisconnect() - add global config parameters as properties - add SaveConfig() - add VendorElemAdd(), VendorElemGet(), VendorElemRem() * fixed Suite B 192-bit AKM to use proper PMK length (note: this makes old releases incompatible with the fixed behavior) * improved PMF behavior for cases where the AP and STA has different configuration by not trying to connect in some corner cases where the connection cannot succeed * added option to reopen debug log (e.g., to rotate the file) upon receipt of SIGHUP signal * EAP-pwd: added support for Brainpool Elliptic Curves (with OpenSSL 1.0.2 and newer) * fixed EAPOL reauthentication after FT protocol run * fixed FTIE generation for 4-way handshake after FT protocol run * extended INTERFACE_ADD command to allow certain type (sta/ap) interface to be created * fixed and improved various FST operations * added 80+80 MHz and 160 MHz VHT support for IBSS/mesh * fixed SIGNAL_POLL in IBSS and mesh cases * added an option to abort an ongoing scan (used to speed up connection and can also be done with the new ABORT_SCAN command) * TLS client - do not verify CA certificates when ca_cert is not specified - support validating server certificate hash - support SHA384 and SHA512 hashes - add signature_algorithms extension into ClientHello - support TLS v1.2 signature algorithm with SHA384 and SHA512 - support server certificate probing - allow specific TLS versions to be disabled with phase2 parameter - support extKeyUsage - support PKCS #5 v2.0 PBES2 - support PKCS #5 with PKCS #12 style key decryption - minimal support for PKCS #12 - support OCSP stapling (including ocsp_multi) * OpenSSL - support OpenSSL 1.1 API changes - drop support for OpenSSL 0.9.8 - drop support for OpenSSL 1.0.0 * added support for multiple schedule scan plans (sched_scan_plans) * added support for external server certificate chain validation (tls_ext_cert_check=1 in the network profile phase1 parameter) * made phase2 parser more strict about correct use of auth=<val> and autheap=<val> values * improved GAS offchannel operations with comeback request * added SIGNAL_MONITOR command to request signal strength monitoring events * added command for retrieving HS 2.0 icons with in-memory storage (REQ_HS20_ICON, GET_HS20_ICON, DEL_HS20_ICON commands and RX-HS20-ICON event) * enabled ACS support for AP mode operations with wpa_supplicant * EAP-PEAP: fixed interoperability issue with Windows 2012r2 server ("Invalid Compound_MAC in cryptobinding TLV") * EAP-TTLS: fixed success after fragmented final Phase 2 message * VHT: added interoperability workaround for 80+80 and 160 MHz channels * WNM: workaround for broken AP operating class behavior * added kqueue(2) support for eloop (CONFIG_ELOOP_KQUEUE) * nl80211: - add support for full station state operations - do not add NL80211_ATTR_SMPS_MODE attribute if HT is disabled - add NL80211_ATTR_PREV_BSSID with Connect command - fix IEEE 802.1X/WEP EAP reauthentication and rekeying to use unencrypted EAPOL frames * added initial MBO support; number of extensions to WNM BSS Transition Management * added support for PBSS/PCP and P2P on 60 GHz * Interworking: add credential realm to EAP-TLS identity * fixed EAPOL-Key Request Secure bit to be 1 if PTK is set * HS 2.0: add support for configuring frame filters * added POLL_STA command to check connectivity in AP mode * added initial functionality for location related operations * started to ignore pmf=1/2 parameter for non-RSN networks * added wps_disabled=1 network profile parameter to allow AP mode to be started without enabling WPS * wpa_cli: added action script support for AP-ENABLED and AP-DISABLED events * improved Public Action frame addressing - add gas_address3 configuration parameter to control Address 3 behavior * number of small fixes - wpa_supplicant-dump-certificate-as-PEM-in-debug-mode.diff: dump x509 certificates from remote radius server in debug mode in WPA-EAP. ------------------------------------------------------------------- Wed Jul 20 11:54:37 UTC 2016 - tchvatal@suse.com - Remove support for <12.3 as we are unresolvable there anyway - Use qt5 on 13.2 if someone pulls this package in - Convert to pkgconfig dependencies over the devel pkgs - Use the %qmake5 macro to build the qt5 gui ------------------------------------------------------------------- Wed Mar 23 16:45:16 UTC 2016 - lnussel@suse.de - add After=dbus.service to prevent too early shutdown (bnc#963652) ------------------------------------------------------------------- Fri Feb 26 21:10:55 UTC 2016 - crrodriguez@opensuse.org - Revert CONFIG_ELOOP_EPOLL=y, it is broken in combination with CONFIG_DBUS=yes. ------------------------------------------------------------------- Sat Feb 20 16:56:01 UTC 2016 - crrodriguez@opensuse.org - spec: Compile the GUI against QT5 in 13.2 and later. ------------------------------------------------------------------- Thu Feb 18 15:36:23 UTC 2016 - crrodriguez@opensuse.org - Previous update did not include version 2.5 tarball or changed the version number in spec, only the changelog and removed patches. - config: set CONFIG_NO_RANDOM_POOL=y, we have a reliable· random number generator by using /dev/urandom, no need to keep an internal random number pool which draws entropy from /dev/random. - config: prefer using epoll(7) instead of select(2) by setting CONFIG_ELOOP_EPOLL=y - wpa_supplicant-getrandom.patch: Prefer to use the getrandom(2) system call to collect entropy. if it is not present disable buffering when reading /dev/urandom, otherwise each os_get_random() call will request BUFSIZ of entropy instead of the few needed bytes. ------------------------------------------------------------------- Wed Feb 17 13:47:43 UTC 2016 - lnussel@suse.de - add aliases for both provided dbus names to avoid systemd stopping the service when switching runlevels (boo#966535) ------------------------------------------------------------------- Thu Feb 4 10:18:54 UTC 2016 - michael@stroeder.com - removed obsolete security patches: * 0001-P2P-Validate-SSID-element-length-before-copying-it-C.patch * 0001-WPS-Fix-HTTP-chunked-transfer-encoding-parser.patch * 0001-AP-WMM-Fix-integer-underflow-in-WMM-Action-frame-par.patch * 0001-EAP-pwd-peer-Fix-payload-length-validation-for-Commi.patch * wpa_s-D-Bus-Fix-operations-when-P2P-management-interface-is-used.patch * 0002-EAP-pwd-server-Fix-payload-length-validation-for-Com.patch * 0003-EAP-pwd-peer-Fix-Total-Length-parsing-for-fragment-r.patch * 0004-EAP-pwd-server-Fix-Total-Length-parsing-for-fragment.patch * 0005-EAP-pwd-peer-Fix-asymmetric-fragmentation-behavior.patch - Update to upstream release 2.5 * fixed P2P validation of SSID element length before copying it [http://w1.fi/security/2015-1/] (CVE-2015-1863) * fixed WPS UPnP vulnerability with HTTP chunked transfer encoding [http://w1.fi/security/2015-2/] (CVE-2015-4141) * fixed WMM Action frame parser (AP mode) [http://w1.fi/security/2015-3/] (CVE-2015-4142) * fixed EAP-pwd peer missing payload length validation [http://w1.fi/security/2015-4/] (CVE-2015-4143, CVE-2015-4144, CVE-2015-4145, CVE-2015-4146) * fixed validation of WPS and P2P NFC NDEF record payload length [http://w1.fi/security/2015-5/] (CVE-2015-8041) * nl80211: - added VHT configuration for IBSS - fixed vendor command handling to check OUI properly - allow driver-based roaming to change ESS * added AVG_BEACON_RSSI to SIGNAL_POLL output * wpa_cli: added tab completion for number of commands * removed unmaintained and not yet completed SChannel/CryptoAPI support * modified Extended Capabilities element use in Probe Request frames to include all cases if any of the values are non-zero * added support for dynamically creating/removing a virtual interface with interface_add/interface_remove * added support for hashed password (NtHash) in EAP-pwd peer * added support for memory-only PSK/passphrase (mem_only_psk=1 and CTRL-REQ/RSP-PSK_PASSPHRASE) * P2P - optimize scan frequencies list when re-joining a persistent group - fixed number of sequences with nl80211 P2P Device interface - added operating class 125 for P2P use cases (this allows 5 GHz channels 161 and 169 to be used if they are enabled in the current regulatory domain) - number of fixes to P2PS functionality - do not allow 40 MHz co-ex PRI/SEC switch to force MCC - extended support for preferred channel listing * D-Bus: - fixed WPS property of fi.w1.wpa_supplicant1.BSS interface - fixed PresenceRequest to use group interface - added new signals: FindStopped, WPS pbc-overlap, GroupFormationFailure, WPS timeout, InvitationReceived - added new methods: WPS Cancel, P2P Cancel, Reconnect, RemoveClient - added manufacturer info * added EAP-EKE peer support for deriving Session-Id * added wps_priority configuration parameter to set the default priority for all network profiles added by WPS * added support to request a scan with specific SSIDs with the SCAN command (optional "ssid <hexdump>" arguments) * removed support for WEP40/WEP104 as a group cipher with WPA/WPA2 * fixed SAE group selection in an error case * modified SAE routines to be more robust and PWE generation to be stronger against timing attacks * added support for Brainpool Elliptic Curves with SAE * added support for CCMP-256 and GCMP-256 as group ciphers with FT * fixed BSS selection based on estimated throughput * added option to disable TLSv1.0 with OpenSSL (phase1="tls_disable_tlsv1_0=1") * added Fast Session Transfer (FST) module * fixed OpenSSL PKCS#12 extra certificate handling * fixed key derivation for Suite B 192-bit AKM (this breaks compatibility with the earlier version) * added RSN IE to Mesh Peering Open/Confirm frames * number of small fixes ------------------------------------------------------------------- Thu May 7 17:18:29 CEST 2015 - ro@suse.de - added patch for bnc#930077 CVE-2015-4141 0001-AP-WMM-Fix-integer-underflow-in-WMM-Action-frame-par.patch - added patch for bnc#930078 CVE-2015-4142 0001-WPS-Fix-HTTP-chunked-transfer-encoding-parser.patch - added patches for bnc#930079 CVE-2015-4143 0001-EAP-pwd-peer-Fix-payload-length-validation-for-Commi.patch 0002-EAP-pwd-server-Fix-payload-length-validation-for-Com.patch 0003-EAP-pwd-peer-Fix-Total-Length-parsing-for-fragment-r.patch 0004-EAP-pwd-server-Fix-Total-Length-parsing-for-fragment.patch 0005-EAP-pwd-peer-Fix-asymmetric-fragmentation-behavior.patch ------------------------------------------------------------------- Fri May 1 21:14:01 UTC 2015 - zaitor@opensuse.org - Add wpa_s-D-Bus-Fix-operations-when-P2P-management-interface-is-used.patch Fix Segmentation fault in wpa_supplicant. Patch taken from upstream master git (arch#44740). ------------------------------------------------------------------- Thu Apr 23 19:49:28 UTC 2015 - crrodriguez@opensuse.org - 0001-P2P-Validate-SSID-element-length-before-copying-it-C.patch Fix CVE-2015-1863, memcpy overflow. - wpa_supplicant-alloc_size.patch: annotate two wrappers with attribute alloc_size, which may help warning us of bugs such as the above. ------------------------------------------------------------------- Fri Apr 10 23:05:28 UTC 2015 - stefan.bruens@rwth-aachen.de - Delete wpa_priv and eapol_test man pages, these are disabled in config - Move wpa_gui man page to gui package ------------------------------------------------------------------- Thu Apr 2 01:02:11 UTC 2015 - stefan.bruens@rwth-aachen.de - Update to 2.4 * allow OpenSSL cipher configuration to be set for internal EAP server (openssl_ciphers parameter) * fixed number of small issues based on hwsim test case failures and static analyzer reports * P2P: - add new=<0/1> flag to P2P-DEVICE-FOUND events - add passive channels in invitation response from P2P Client - enable nl80211 P2P_DEVICE support by default - fix regresssion in disallow_freq preventing search on social channels - fix regressions in P2P SD query processing - try to re-invite with social operating channel if no common channels in invitation - allow cross connection on parent interface (this fixes number of use cases with nl80211) - add support for P2P services (P2PS) - add p2p_go_ctwindow configuration parameter to allow GO CTWindow to be configured * increase postponing of EAPOL-Start by one second with AP/GO that supports WPS 2.0 (this makes it less likely to trigger extra roundtrip of identity frames) * add support for PMKSA caching with SAE * add support for control mesh BSS (IEEE 802.11s) operations * fixed number of issues with D-Bus P2P commands * fixed regression in ap_scan=2 special case for WPS * fixed macsec_validate configuration * add a workaround for incorrectly behaving APs that try to use EAPOL-Key descriptor version 3 when the station supports PMF even if PMF is not enabled on the AP * allow TLS v1.1 and v1.2 to be negotiated by default; previous behavior of disabling these can be configured to work around issues with broken servers with phase1="tls_disable_tlsv1_1=1 tls_disable_tlsv1_2=1" * add support for Suite B (128-bit and 192-bit level) key management and cipher suites * add WMM-AC support (WMM_AC_ADDTS/WMM_AC_DELTS) * improved BSS Transition Management processing * add support for neighbor report * add support for link measurement * fixed expiration of BSS entry with all-zeros BSSID * add optional LAST_ID=x argument to LIST_NETWORK to allow all configured networks to be listed even with huge number of network profiles * add support for EAP Re-Authentication Protocol (ERP) * fixed EAP-IKEv2 fragmentation reassembly * improved PKCS#11 configuration for OpenSSL * set stdout to be line-buffered * add TDLS channel switch configuration * add support for MAC address randomization in scans with nl80211 * enable HT for IBSS if supported by the driver * add BSSID black and white lists (bssid_blacklist, bssid_whitelist) * add support for domain_suffix_match with GnuTLS * add OCSP stapling client support with GnuTLS * include peer certificate in EAP events even without a separate probe operation; old behavior can be restored with cert_in_cb=0 * add peer ceritficate alt subject name to EAP events (CTRL-EVENT-EAP-PEER-ALT) * add domain_match network profile parameter (similar to domain_suffix_match, but full match is required) * enable AP/GO mode HT Tx STBC automatically based on driver support * add ANQP-QUERY-DONE event to provide information on ANQP parsing status * allow passive scanning to be forced with passive_scan=1 * add a workaround for Linux packet socket behavior when interface is in bridge * increase 5 GHz band preference in BSS selection (estimate SNR, if info not available from driver; estimate maximum throughput based on common HT/VHT/specific TX rate support) * add INTERWORKING_ADD_NETWORK ctrl_iface command; this can be used to implement Interworking network selection behavior in upper layers software components * add optional reassoc_same_bss_optim=1 (disabled by default) optimization to avoid unnecessary Authentication frame exchange * extend TDLS frame padding workaround to cover all packets * allow wpa_supplicant to recover nl80211 functionality if the cfg80211 module gets removed and reloaded without restarting wpa_supplicant * allow hostapd DFS implementation to be used in wpa_supplicant AP mode ------------------------------------------------------------------- Sat Oct 18 21:08:01 UTC 2014 - stefan.bruens@rwth-aachen.de - Update to 2.3 * fixed number of minor issues identified in static analyzer warnings * fixed wfd_dev_info to be more careful and not read beyond the buffer when parsing invalid information for P2P-DEVICE-FOUND * extended P2P and GAS query operations to support drivers that have maximum remain-on-channel time below 1000 ms (500 ms is the current minimum supported value) * added p2p_search_delay parameter to make the default p2p_find delay configurable * improved P2P operating channel selection for various multi-channel concurrency cases * fixed some TDLS failure cases to clean up driver state * fixed dynamic interface addition cases with nl80211 to avoid adding ifindex values to incorrect interface to skip foreign interface events properly * added TDLS workaround for some APs that may add extra data to the end of a short frame * fixed EAP-AKA' message parser with multiple AT_KDF attributes * added configuration option (p2p_passphrase_len) to allow longer passphrases to be generated for P2P groups * fixed IBSS channel configuration in some corner cases * improved HT/VHT/QoS parameter setup for TDLS * modified D-Bus interface for P2P peers/groups * started to use constant time comparison for various password and hash values to reduce possibility of any externally measurable timing differences * extended explicit clearing of freed memory and expired keys to avoid keeping private data in memory longer than necessary * added optional scan_id parameter to the SCAN command to allow manual scan requests for active scans for specific configured SSIDs * fixed CTRL-EVENT-REGDOM-CHANGE event init parameter value * added option to set Hotspot 2.0 Rel 2 update_identifier in network configuration to support external configuration * modified Android PNO functionality to send Probe Request frames only for hidden SSIDs (based on scan_ssid=1) * added generic mechanism for adding vendor elements into frames at runtime (VENDOR_ELEM_ADD, VENDOR_ELEM_GET, VENDOR_ELEM_REMOVE) * added fields to show unrecognized vendor elements in P2P_PEER * removed EAP-TTLS/MSCHAPv2 interoperability workaround so that MS-CHAP2-Success is required to be present regardless of eap_workaround configuration * modified EAP fast session resumption to allow results to be used only with the same network block that generated them * extended freq_list configuration to apply for sched_scan as well as normal scan * modified WPS to merge mixed-WPA/WPA2 credentials from a single session * fixed nl80211/RTM_DELLINK processing when a P2P GO interface is removed from a bridge * fixed number of small P2P issues to make negotiations more robust in corner cases * added experimental support for using temporary, random local MAC address (mac_addr and preassoc_mac_addr parameters); this is disabled by default (i.e., previous behavior of using permanent address is maintained if configuration is not changed) * added D-Bus interface for setting/clearing WFD IEs * fixed TDLS AID configuration for VHT * modified -m<conf> configuration file to be used only for the P2P non-netdev management device and do not load this for the default station interface or load the station interface configuration for the P2P management interface * fixed external MAC address changes while wpa_supplicant is running * started to enable HT (if supported by the driver) for IBSS * fixed wpa_cli action script execution to use more robust mechanism (CVE-2014-3686) ------------------------------------------------------------------- Thu Sep 18 12:32:57 UTC 2014 - schwab@suse.de - Avoid spurious dependency on /usr/bin/python due to executable doc files ------------------------------------------------------------------- Wed Aug 20 08:39:19 UTC 2014 - lnussel@suse.de - fix dbus systemd activation (bnc#892683) ------------------------------------------------------------------- Thu Jun 26 11:30:11 UTC 2014 - lnussel@suse.de - don't use systemctl enable in %post. Needs to be handled by presets. ------------------------------------------------------------------- Thu Jun 19 07:34:35 UTC 2014 - glin@suse.com - Update the build config based on the new defconfig - Remove the libnl1 requirement. It's not supported. ------------------------------------------------------------------- Mon Jun 16 04:28:45 UTC 2014 - glin@suse.com - Update to 2.2 * added DFS indicator to get_capability freq * added/fixed nl80211 functionality * removed unused NFC_RX_HANDOVER_REQ and NFC_RX_HANDOVER_SEL control interface commands (the more generic NFC_REPORT_HANDOVER is now used) * fixed MSCHAP UTF-8 to UCS-2 conversion for three-byte encoding * P2P enhancements/fixes * added phase1 network parameter options for disabling TLS v1.1 and v1.2 to allow workarounds with misbehaving AAA servers * Interworking/Hotspot 2.0 enhancements * fixed TDLS interoperability issues with supported operating class in * some deployed stations * internal TLS implementation enhancements/fixes * fixed PTK derivation for CCMP-256 and GCMP-256 * added "reattach" command for fast reassociate-back-to-same-BSS * added "get_capability tdls" command * D-Bus interface extensions/fixes * fixed potential segmentation fault and memory leaks in WNM neighbor report processing * EAP-pwd fixes * added MACsec/IEEE Std 802.1X-2010 PAE implementation * fixed a memory leak in SAE random number generation * fixed EAPOL-Key exchange when GCMP is used with SHA256-based AKM * added support for simultaneous authentication of equals (SAE) for stronger password-based authentication with WPA2-Personal * improved P2P negotiation and group formation robustness * improved P2P channel selection * added nl80211 functionality - VHT configuration for nl80211 - MFP (IEEE 802.11w) information for nl80211 command API - support split wiphy dump - FT (IEEE 802.11r) with driver-based SME - use advertised number of supported concurrent channels - QoS Mapping configuration * improved TDLS negotiation robustness * added 'SCAN TYPE=ONLY' ctrl_iface command to request manual scan without executing roaming/network re-selection on scan results * added Session-Id derivation for EAP peer methods * allow AP/Enrollee to be specified with BSSID instead of UUID for WPS ER operations * changed the default driver interface from wext to nl80211 if both are included in the build * added domain_suffix_match (and domain_suffix_match2 for Phase 2 EAP-TLS) to specify additional constraint for the server certificate domain name * added support for WPS+NFC updates and P2P+NFC - Drop wpa_supplicant-driver-wext-debug.patch and wpa_supplicant-errormsg.patch: wext is deprecated - Enable AP mode, P2P, RSN IBSS, EAP FAST, EAP AKA, and WPS NFC ------------------------------------------------------------------- Thu May 8 11:18:08 CEST 2014 - ro@suse.de - use _rundir macro ------------------------------------------------------------------- Mon Sep 9 09:18:17 UTC 2013 - fcrozat@suse.com - Add systemd service file, to properly track wpa_supplicant in its own systemd service (and not in dbus one). - Always enable systemd service, it is still dbus activated. ------------------------------------------------------------------- Wed Apr 24 03:48:27 UTC 2013 - glin@suse.com - Update to 2.0 * removed Qt3-based wpa_gui (obsoleted by wpa_qui-qt4) * removed unmaintained driver wrappers broadcom, iphone, osx, ralink, hostap, madwifi (hostap and madwifi remain available for hostapd; their wpa_supplicant functionality is obsoleted by wext) * improved debug logging (human readable event names, interface name included in more entries) * changed AP mode behavior to enable WPS only for open and WPA/WPA2-Personal configuration * improved P2P concurrency operations - better coordination of concurrent scan and P2P search operations - avoid concurrent remain-on-channel operation requests by canceling previous operations prior to starting a new one - reject operations that would require multi-channel concurrency if the driver does not support it - add parameter to select whether STA or P2P connection is preferred if the driver cannot support both at the same time - allow driver to indicate channel changes - added optional delay=<search delay in milliseconds> parameter for p2p_find to avoid taking all radio resources - use 500 ms p2p_find search delay by default during concurrent operations - allow all channels in GO Negotiation if the driver supports multi-channel concurrency * added number of small changes to make it easier for static analyzers to understand the implementation * fixed number of small bugs (see git logs for more details) * nl80211: number of updates to use new cfg80211/nl80211 functionality - replace monitor interface with nl80211 commands for AP mode - additional information for driver-based AP SME - STA entry authorization in RSN IBSS * EAP-pwd: - fixed KDF for group 21 and zero-padding - added support for fragmentation - increased maximum number of hunting-and-pecking iterations * avoid excessive Probe Response retries for broadcast Probe Request frames (only with drivers using wpa_supplicant AP mode SME/MLME) * added "GET country" ctrl_iface command * do not save an invalid network block in wpa_supplicant.conf to avoid problems reading the file on next start * send STA connected/disconnected ctrl_iface events to both the P2P group and parent interfaces * added preliminary support for using TLS v1.2 (CONFIG_TLSV12=y) * added "SET pno <1/0>" ctrl_iface command to start/stop preferred network offload with sched_scan driver command * merged in number of changes from Android repository for P2P, nl80211, and build parameters * changed P2P GO mode configuration to use driver capabilities to automatically enable HT operations when supported * added "wpa_cli status wps" command to fetch WPA2-Personal passhrase for WPS use cases in AP mode * EAP-AKA: keep pseudonym identity across EAP exchanges to match EAP-SIM behavior * improved reassociation behavior in cases where association is rejected or when an AP disconnects us to handle common load balancing mechanisms - try to avoid extra scans when the needed information is available * added optional "join" argument for p2p_prov_disc ctrl_iface command * added group ifname to P2P-PROV-DISC-* events * added P2P Device Address to AP-STA-DISCONNECTED event and use p2p_dev_addr parameter name with AP-STA-CONNECTED * added workarounds for WPS PBC overlap detection for some P2P use cases where deployed stations work incorrectly * optimize WPS connection speed by disconnecting prior to WPS scan and by using single channel scans when AP channel is known * PCSC and SIM/USIM improvements: - accept 0x67 (Wrong length) as a response to READ RECORD to fix issues with some USIM cards - try to read MNC length from SIM/USIM - build realm according to 3GPP TS 23.003 with identity from the SIM - allow T1 protocol to be enabled * added more WPS and P2P information available through D-Bus * improve P2P negotiation robustness - extra waits to get ACK frames through - longer timeouts for cases where deployed devices have been identified have issues meeting the specification requirements - more retries for some P2P frames - handle race conditions in GO Negotiation start by both devices - ignore unexpected GO Negotiation Response frame * added support for libnl 3.2 and newer * added P2P persistent group info to P2P_PEER data * maintain a list of P2P Clients for persistent group on GO * AP: increased initial group key handshake retransmit timeout to 500 ms * added optional dev_id parameter for p2p_find * added P2P-FIND-STOPPED ctrl_iface event * fixed issues in WPA/RSN element validation when roaming with ap_scan=1 and driver-based BSS selection * do not expire P2P peer entries while connected with the peer in a group * fixed WSC element inclusion in cases where P2P is disabled * AP: added a WPS workaround for mixed mode AP Settings with Windows 7 * EAP-SIM: fixed AT_COUNTER_TOO_SMALL use * EAP-SIM/AKA: append realm to pseudonym identity * EAP-SIM/AKA: store pseudonym identity in network configuration to allow it to persist over multiple EAP sessions and wpa_supplicant restarts * EAP-AKA': updated to RFC 5448 (username prefixes changed); note: this breaks interoperability with older versions * added support for WFA Hotspot 2.0 - GAS/ANQP to fetch network information - credential configuration and automatic network selections based on credential match with ANQP information * limited PMKSA cache entries to be used only with the network context that was used to create them * improved PMKSA cache expiration to avoid unnecessary disconnections * adjusted bgscan_simple fast-scan backoff to avoid too frequent background scans * removed ctrl_iface event on P2P PD Response in join-group case * added option to fetch BSS table entry based on P2P Device Address ("BSS p2p_dev_addr=<P2P Device Address>") * added BSS entry age to ctrl_iface BSS command output * added optional MASK=0xH option for ctrl_iface BSS command to select which fields are included in the response * added optional RANGE=ALL|N1-N2 option for ctrl_iface BSS command to fetch information about several BSSes in one call * simplified licensing terms by selecting the BSD license as the only alternative * added "P2P_SET disallow_freq <freq list>" ctrl_iface command to disable channels from P2P use * added p2p_pref_chan configuration parameter to allow preferred P2P channels to be specified * added support for advertising immediate availability of a WPS credential for P2P use cases * optimized scan operations for P2P use cases (use single channel scan for a specific SSID when possible) * EAP-TTLS: fixed peer challenge generation for MSCHAPv2 * SME: do not use reassociation after explicit disconnection request (local or a notification from an AP) * added support for sending debug info to Linux tracing (-T on command line) * added support for using Deauthentication reason code 3 as an indication of P2P group termination * added wps_vendor_ext_m1 configuration parameter to allow vendor specific attributes to be added to WPS M1 * started using separate TLS library context for tunneled TLS (EAP-PEAP/TLS, EAP-TTLS/TLS, EAP-FAST/TLS) to support different CA certificate configuration between Phase 1 and Phase 2 * added optional "auto" parameter for p2p_connect to request automatic GO Negotiation vs. join-a-group selection * added disabled_scan_offload parameter to disable automatic scan offloading (sched_scan) * added optional persistent=<network id> parameter for p2p_connect to allow forcing of a specific SSID/passphrase for GO Negotiation * added support for OBSS scan requests and 20/40 BSS coexistence reports * reject PD Request for unknown group * removed scripts and notes related to Windows binary releases (which have not been used starting from 1.x) * added initial support for WNM operations - Keep-alive based on BSS max idle period - WNM-Sleep Mode - minimal BSS Transition Management processing * added autoscan module to control scanning behavior while not connected - autoscan_periodic and autoscan_exponential modules * added new WPS NFC ctrl_iface mechanism - added initial support NFC connection handover - removed obsoleted WPS_OOB command (including support for deprecated UFD config_method) * added optional framework for external password storage ("ext:<name>") * wpa_cli: added optional support for controlling wpa_supplicant remotely over UDP (CONFIG_CTRL_IFACE=udp-remote) for testing purposes * wpa_cli: extended tab completion to more commands * changed SSID output to use printf-escaped strings instead of masking of non-ASCII characters - SSID can now be configured in the same format: ssid=P"abc\x00test" * removed default ACM=1 from AC_VO and AC_VI * added optional "ht40" argument for P2P ctrl_iface commands to allow 40 MHz channels to be requested on the 5 GHz band * added optional parameters for p2p_invite command to specify channel when reinvoking a persistent group as the GO * improved FIPS mode builds with OpenSSL - "make fips" with CONFIG_FIPS=y to build wpa_supplicant with the OpenSSL FIPS object module - replace low level OpenSSL AES API calls to use EVP - use OpenSSL keying material exporter when possible - do not export TLS keys in FIPS mode - remove MD5 from CONFIG_FIPS=y builds - use OpenSSL function for PKBDF2 passphrase-to-PSK - use OpenSSL HMAC implementation - mix RAND_bytes() output into random_get_bytes() to force OpenSSL DRBG to be used in FIPS mode - use OpenSSL CMAC implementation * added mechanism to disable TLS Session Ticket extension - a workaround for servers that do not support TLS extensions that was enabled by default in recent OpenSSL versions - tls_disable_session_ticket=1 - automatically disable TLS Session Ticket extension by default when using EAP-TLS/PEAP/TTLS (i.e., only use it with EAP-FAST) * changed VENDOR-TEST EAP method to use proper private enterprise number (this will not interoperate with older versions) * disable network block temporarily on authentication failures * improved WPS AP selection during WPS PIN iteration * added support for configuring GCMP cipher for IEEE 802.11ad * added support for Wi-Fi Display extensions - WFD_SUBELEMENT_SET ctrl_iface command to configure WFD subelements - SET wifi_display <0/1> to disable/enable WFD support - WFD service discovery - an external program is needed to manage the audio/video streaming and codecs * optimized scan result use for network selection - use the internal BSS table instead of raw scan results - allow unnecessary scans to be skipped if fresh information is available (e.g., after GAS/ANQP round for Interworking) * added support for 256-bit AES with internal TLS implementation * allow peer to propose channel in P2P invitation process for a persistent group * added disallow_aps parameter to allow BSSIDs/SSIDs to be disallowed from network selection * re-enable the networks disabled during WPS operations * allow P2P functionality to be disabled per interface (p2p_disabled=1) * added secondary device types into P2P_PEER output * added an option to disable use of a separate P2P group interface (p2p_no_group_iface=1) * fixed P2P Bonjour SD to match entries with both compressed and not compressed domain name format and support multiple Bonjour PTR matches for the same key * use deauthentication instead of disassociation for all disconnection operations; this removes the now unused disassociate() wpa_driver_ops callback * optimized PSK generation on P2P GO by caching results to avoid multiple PBKDF2 operations * added okc=1 global configuration parameter to allow OKC to be enabled by default for all network blocks * added a workaround for WPS PBC session overlap detection to avoid interop issues with deployed station implementations that do not remove active PBC indication from Probe Request frames properly * added basic support for 60 GHz band * extend EAPOL frames processing workaround for roaming cases (postpone processing of unexpected EAPOL frame until association event to handle reordered events) - Drop upstreamed wpa_supplicant-libnl3.patch - Disable obsolete Ralink driver ------------------------------------------------------------------- Tue Dec 11 10:16:40 UTC 2012 - glin@suse.com - Update to 1.1 * Fix EAPOL supplicant port authorization with PMKSA caching. * Fix EAPOL processing when STA switches between multi-BSSes. * Fix EAP-FAST with OpenSSL 1.0.1. * EAP-pwd: Increase maximum number of hunting-and-pecking iterations, which results in less authentication attempts failing. * Set state to DISCONNECTED on AP creation errors. Previously the supplicant would stay in SCANNING state forever. * Fix REMOVE_NETWORK to not run operations with invalid current_ssid. * EAP-SIM peer: Fix AT_COUNTER_TOO_SMALL use. * Interworking: Fix PLMN matching with multiple entries to compare all entries, not just the first one. * Handle long configuration file lines more gracefully. * Fix adding extra IEs in sched scan. * PMKSA: Set cur_pmksa pointer during initial association. * PMKSA: Do not evict the active cache entry when adding new ones. * Set state consistently to DISCONNECTED on auth/assoc failures. * Fix BSSID enforcement with driver-based BSS selection. Set BSSID and channel when the network block has an explicit bssid parameter to select which BSS is to be used. * wpa_gui: Fix compilation with gcc/g++ 4.7. * EAP-AKA' - Update to RFC 5448 in the leading characters used in the username. This will make EAP-AKA' not interoperate between the earlier draft version and the new version. - Fix SIM/USIM determination to support EAP-AKA'. * dbus: - Add global capabilities property. - Fix bss_expire_count getter, which was returning the wrong value. - P2P: Remove network_object dictionary entry from signal GroupStarted. - Fix D-Bus build without ctrl_iface. * WPS: - Fix nonce comparisons to compare all bytes, not just the first byte. - Fix NFC password token building with WPS 2.0 to avoid wpabuf overflow and application abort if NFC out-of-band mechanism is used with WPS 2.0 enabled. - Fix cleanup of WPS operations (by clearing them) in WPA_SCANNING and WPA_DISCONNECTED states. - Fix issue with BSSID filter handling that could cause only a single one of the available BSSes to be available or could cause issues connecting. - Fix overlapping memcpy on WPS interface addition. * P2P: - Remove channel 14 from supported P2P channels. - Fix Provision Discovery retries on delay in off channel transmission, to avoid unnecessary retries. - Limit maximum number of stored P2P clients (the p2p_client_list parameter) to 100. - Improve p2p_client_list updates in configuration file, reording entries so that the most recently added values are maintained in the list if the list gets truncated due to size. - Fix Provision Discovery retries during p2p_find by making the p2p_find case behave consistently with the limited retry behavior used with Provision Discovery retries in the IDLE state. - Fix P2P Client Discoverability bit updates so that the bit is only updated based on P2P Group Info attribute from a GO. - Fix GO Negotiation race condition where both devices may believe they are the GO. (Ignore unexpected GO Neg Response if we have already sent GO Neg Response.) - Deinitialize global P2P context on P2P management interface removal. - Wait 100 ms if driver fails to start listen operation. This is a workaround for some drivers that may accept the remain-on-channel command, but instead of indicating start event for remain-on-channel, just indicate that the operation has been cancelled immediately. - Clone max_sta_num parameter for group interfaces, allowing this parameter set in the main config file to apply to dynamically created P2P group interfaces. - Fix Device ID matching for Probe Request frames, which was checking only the first octet of the P2P Device Address. - Do not update peer Listen channel based on PD Request Invitation Request frames (just on Probe Response frames). - Fix p2p_listen to disallow scheduling a new after scan operation in the case where a p2p_connect operation is pending. - Remove upstreamed wpa_supplicant-gcc47.patch - Enable background scan to improve roaming - Build driver with libnl3 (wpa_supplicant-libnl3.patch) ------------------------------------------------------------------- Tue May 15 04:35:01 UTC 2012 - glin@suse.com - Update to 1.0 * Delay STA entry removal until Deauth/Disassoc TX status in AP mode. This allows the driver to use PS buffering of Deauthentication and Disassociation frames when the STA is in power save sleep. Only available with drivers that provide TX status events for Deauth/Disassoc frames (nl80211). * Drop oldest unknown BSS table entries first. This makes it less likely to hit connection issues in environments with huge number of visible APs. * Add systemd support. * Add support for setting the syslog facility from the config file at build time. * atheros: Add support for IEEE 802.11w configuration. * AP mode: Allow enable HT20 if driver supports it, by setting the config parameter ieee80211n. * Allow AP mode to disconnect STAs based on low ACK condition (when the data connection is not working properly, e.g., due to the STA going outside the range of the AP). * nl80211: - Support GTK rekey offload. - Support PMKSA candidate events. This adds support for RSN pre-authentication with nl80211 interface and drivers that handle roaming internally. * Improved dbus interface * New wpa_cli commands to setup the scan interval and to support P2P and WPS/WPS ER * AP mode: Add max_num_sta config option, which can be used to limit the number of stations allowed to connect to the AP. * wext: Increase scan timeout from 5 to 10 seconds. * Allow an external program to manage the BSS blacklist and display its current contents. * WPS: - Add wpa_cli wps_pin get command for generating random PINs. This can be used in a UI to generate a PIN without starting WPS (or P2P) operation. - Set RF bands based on driver capabilities, instead of hardcoding them. - Add mechanism for indicating non-standard WPS errors. - Add wps_ap_pin cli command for wpa_supplicant AP mode. - Add wps_check_pin cli command for processing PIN from user input. UIs can use this command to process a PIN entered by a user and to validate the checksum digit (if present). - Cancel WPS operation on PBC session overlap detection. - New wps_cancel command in wpa_cli will cancel a pending WPS operation. - wpa_cli action: Add WPS_EVENT_SUCCESS and WPS_EVENT_FAIL handlers. - Trigger WPS config update on Manufacturer, Model Name, Model Number, and Serial Number changes. - Fragment size is now configurable for EAP-WSC peer. Use wpa_cli set wps_fragment_size <val>. - Disable AP PIN after 10 consecutive failures. Slow down attacks on failures up to 10. - Allow AP to start in Enrollee mode without AP PIN for probing, to be compatible with Windows 7. - Add Config Error into WPS-FAIL events to provide more info to the user on how to resolve the issue. - Label and Display config methods are not allowed to be enabled at the same time, since it is unclear which PIN to use if both methods are advertised. - When controlling multiple interfaces: - apply WPS commands to all interfaces configured to use WPS - apply WPS config changes to all interfaces that use WPS - when an attack is detected on any interface, disable AP PIN on all interfaces * WPS ER: - Add special AP Setup Locked mode to allow read only ER. - Show SetSelectedRegistrar events as ctrl_iface events - Add wps_er_set_config to enroll a network based on a local network configuration block instead of having to (re-)learn the current AP settings with wps_er_learn. - Allow AP filtering based on IP address, add ctrl_iface event for learned AP settings, add wps_er_config command to configure an AP. * Add support for WPS 2.0 * TDLS: - Propogate TDLS related nl80211 capability flags from kernel and add them as driver capability flags. If the driver doesn't support capabilities, assume TDLS is supported internally. When TDLS is explicitly not supported, disable all user facing TDLS operations. - Allow TDLS to be disabled at runtime. - Honor AP TDLS settings that prohibit/allow TDLS. - Add a special testing feature for changing TDLS behavior. - Add support for TDLS 802.11z. * wlantest: Add a tool wlantest for IEEE802.11 protocol testing. wlantest can be used to capture frames from a monitor interface for realtime capturing or from pcap files for offline analysis. * bgscan learn: Add new bgscan that learns BSS information based on previous scans, and uses that information to dynamically generate the list of channels for background scans. * Add a new debug message level for excessive information. * TLS: Add support for tls_disable_time_checks=1 in client mode. * Improved internal TLS * Add RFKill support by adding an interface state "disabled". * Reorder some IEs to get closer to IEEE 802.11 standard. Move WMM into end of Beacon, Probe Resp and (Re)Assoc Resp frames. Move HT IEs to be later in (Re)Assoc Resp. * Wi-Fi Direct support - Remove wpa_supplicant-dbus-events.patch (merged upstream) - Remove wpa_supplicant-probed-cert-dbus-signal.patch (merged upstream) ------------------------------------------------------------------- Sat Mar 17 22:30:51 UTC 2012 - dimstar@opensuse.org - Add wpa_supplicant-gcc47.patch: Fix build with gcc 4.7. ------------------------------------------------------------------- Tue Jan 10 08:08:15 UTC 2012 - glin@suse.com - Add wpa_supplicant-probed-cert-dbus-signal.patch to emit a D-Bus signal when the AP returned the certificate of the RADIUS server (bnc#574266) ------------------------------------------------------------------- Mon Oct 10 13:28:43 UTC 2011 - lnussel@suse.de - use same exec line in fi.w1.wpa_supplicant1.service as in fi.epitest.hostap.WPASupplicant.service - fix build on older distros - fix not using RPM_OPT_FLAGS - use %_smp_mflags ------------------------------------------------------------------- Fri Sep 16 12:02:37 UTC 2011 - jengelh@medozas.de - Select libnl-1_1-devel ------------------------------------------------------------------- Wed Aug 31 13:46:53 CEST 2011 - vbotka@suse.de - %ghost directive for /var/run/wpa_supplicant added for tmpfs (bnc 710281) ------------------------------------------------------------------- Wed Mar 16 21:22:58 UTC 2011 - dimstar@opensuse.org - Add wpa_supplicant-dbus-events.patch: Emit property changed events when adding/removing BSSes. Required by NetworkManager 0.9 beta1 and later. - Also install fi.w1.wpa_supplicant1.service, which was added as source5, sourced from the wpa_supplicant source code, with modified exec line pointing to /usr/sbin instead of /sbin. ------------------------------------------------------------------- Tue Sep 7 23:08:14 CEST 2010 - vbotka@suse.de - update to 0.7.3 * fixed fallback from failed PMKSA caching into full EAP authentication [Bug 355] * fixed issue with early D-Bus signals during initialization * fixed X.509 name handling in internal TLS * fixed WPS ER to use corrent Enrollee MAC Address in Credential * fixed scanning routines ot improve AP selection for WPS * added WPS workaround for open networks * fixed WPS Diffie-Hellman derivation to use correct public key length * fixed wpa_supplicant AP mode operations to ignore Supplicant and scan result events * improved SME operations with nl80211 * fixed WPS ER event_id handling in some cases * fixed some issues with bgscan simple to avoid unnecessary scans * fixed issue with l2_packet_ndis overlapped writes corrupting stack [Bug 328] * updated WinPcap to the latest stable version 4.1.2 in Windows installer update to 0.7.2 * nl80211: fixed number of issues with roaming * avoid unnecessary roaming if multiple APs with similar signal strength are present in scan results * add TLS client events and server probing to ease design of automatic detection of EAP parameters * add option for server certificate matching (SHA256 hash of the certificate) instead of trusted CA certificate configuration * bsd: Cleaned up driver wrapper and added various low-level configuration options * wpa_gui-qt4: do not show too frequent WPS AP available events as tray messages * TNC: fixed issues with fragmentation * EAP-TNC: add Flags field into fragment acknowledgement (needed to interoperate with other implementations; may potentially breaks compatibility with older wpa_supplicant/hostapd versions) * wpa_cli: added option for using a separate process to receive event messages to reduce latency in showing these (CFLAGS += -DCONFIG_WPA_CLI_FORK=y in .config to enable this) * maximum BSS table size can now be configured (bss_max_count) * BSSes to be included in the BSS table can be filtered based on configured SSIDs to save memory (filter_ssids) * fix number of issues with IEEE 802.11r/FT; this version is not backwards compatible with old versions * nl80211: add support for IEEE 802.11r/FT protocol (both over-the-air and over-the-DS) * add freq_list network configuration parameter to allow the AP selection to filter out entries based on the operating channel * add signal strength change events for bgscan; this allows more dynamic changes to background scanning interval based on changes in the signal strength with the current AP; this improves roaming within ESS quite a bit, e.g., with bgscan="simple:30:-45:300" in the network configuration block to request background scans less frequently when signal strength remains good and to automatically trigger background scans whenever signal strength drops noticeably (this is currently only available with nl80211) * add BSSID and reason code (if available) to disconnect event messages * wpa_gui-qt4: more complete support for translating the GUI with linguist and add German translation * fix DH padding with internal crypto code (mainly, for WPS) * do not trigger initial scan automatically anymore if there are no enabled networks ------------------------------------------------------------------- Fri May 28 12:49:53 CEST 2010 - vbotka@suse.de - Fix fallback from failed PMKSA caching into full EAP authentication (bnc 601501) ------------------------------------------------------------------- Sun Jan 31 13:13:46 UTC 2010 - aj@suse.de - Update to 0.7.1 (full changelog in wpa_supplicant/ChangeLog): * Cleanup of interfaces * dbus: added new DBus interface (fi.w1.wpa_supplicant1) * driver_nl80211: multiple updates to provide support for new Linux nl80211/mac80211 functionality - Remove wpa_supplicant-dbus-iface-segfault-fix.patch, does not apply at all. - Remove wpa_supplicant-dbus-reset-eapol.patch (merged upstream). - Disable patches that do not apply anymore but are not merged. ------------------------------------------------------------------- Mon Sep 28 08:44:02 UTC 2009 - lnussel@suse.de - simplify dbus config, allow introspection ------------------------------------------------------------------- Mon Sep 7 19:41:35 UTC 2009 - claes.backstrom@fsfe.org - Added rotation of log file with logrotate (bnc#508041) ------------------------------------------------------------------- Tue May 12 12:28:55 CEST 2009 - dmueller@suse.de - reenable logfile writing support to make d-bus activation work again (bnc#502957) ------------------------------------------------------------------- Tue Apr 7 13:02:49 CEST 2009 - hschaa@suse.de - Enable ralink driver (bnc#481380) - Enable nl80211 driver (bnc#485453) - Rebase all SUSE patches to 0.6.9 - Remove upstreamed patches - Update to 0.6.9 * driver_ndis: add PAE group address to the multicast address list to fix wired IEEE 802.1X authentication * fixed IEEE 802.11r key derivation function to match with the standard (note: this breaks interoperability with previous version) [Bug 303] * increased wpa_cli ping interval to 5 seconds and made this configurable with a new command line options (-G<seconds>) * fixed scan buffer processing with WEXT to handle up to 65535 byte result buffer (previously, limited to 32768 bytes) * added support for Wi-Fi Protected Setup (WPS) (wpa_supplicant can now be configured to act as a WPS Enrollee to enroll credentials for a network using PIN and PBC methods; in addition, wpa_supplicant can act as a wireless WPS Registrar to configure an AP); WPS support can be enabled by adding CONFIG_WPS=y into .config and setting the runtime configuration variables in wpa_supplicant.conf (see WPS section in the example configuration file); new wpa_cli commands wps_pin, wps_pbc, and wps_reg are used to manage WPS negotiation; see README-WPS for more details * added support for EAP-AKA' (draft-arkko-eap-aka-kdf) * added support for using driver_test over UDP socket * fixed PEAPv0 Cryptobinding interoperability issue with Windows Server 2008 NPS; optional cryptobinding is now enabled (again) by default * fixed PSK editing in wpa_gui * changed EAP-GPSK to use the IANA assigned EAP method type 51 * added a Windows installer that includes WinPcap and all the needed DLLs; in addition, it set up the registry automatically so that user will only need start wpa_gui to get prompted to start the wpasvc servide and add a new interface if needed through wpa_gui dialog * updated management frame protection to use IEEE 802.11w/D7.0 * added Milenage SIM/USIM emulator for EAP-SIM/EAP-AKA (can be used to simulate test SIM/USIM card with a known private key; enable with CONFIG_SIM_SIMULATOR=y/CONFIG_USIM_SIMULATOR=y in .config and password="Ki:OPc"/password="Ki:OPc:SQN" in network configuration) * added a new network configuration option, wpa_ptk_rekey, that can be used to enforce frequent PTK rekeying, e.g., to mitigate some attacks against TKIP deficiencies * added an optional mitigation mechanism for certain attacks against TKIP by delaying Michael MIC error reports by a random amount of time between 0 and 60 seconds; this can be enabled with a build option CONFIG_DELAYED_MIC_ERROR_REPORT=y in .config * fixed EAP-AKA to use RES Length field in AT_RES as length in bits, not bytes * updated OpenSSL code for EAP-FAST to use an updated version of the session ticket overriding API that was included into the upstream OpenSSL 0.9.9 tree on 2008-11-15 (no additional OpenSSL patch is needed with that version anymore) * updated userspace MLME instructions to match with the current Linux mac80211 implementation; please also note that this can only be used with driver_nl80211.c (the old code from driver_wext.c was removed) * added support (Linux only) for RoboSwitch chipsets (often found in consumer grade routers); driver interface 'roboswitch' * fixed canceling of PMKSA caching when using drivers that generate RSN IE and refuse to drop PMKIDs that wpa_supplicant does not know about * added support for SHA-256 as X.509 certificate digest when using the internal X.509/TLSv1 implementation * updated management frame protection to use IEEE 802.11w/D6.0 * added support for using SHA256-based stronger key derivation for WPA2 (IEEE 802.11w) * fixed FT (IEEE 802.11r) authentication after a failed association to use correct FTIE * added support for configuring Phase 2 (inner/tunneled) authentication method with wpa_gui-qt4 * added support for EAP Sequences in EAP-FAST Phase 2 * added support for using TNC with EAP-FAST * added driver_ps3 for the PS3 Linux wireless driver * added support for optional cryptobinding with PEAPv0 * fixed the OpenSSL patches (0.9.8g and 0.9.9) for EAP-FAST to allow fallback to full handshake if server rejects PAC-Opaque * added fragmentation support for EAP-TNC * added support for parsing PKCS #8 formatted private keys into the internal TLS implementation (both PKCS #1 RSA key and PKCS #8 encapsulated RSA key can now be used) * added option of using faster, but larger, routines in the internal LibTomMath (for internal TLS implementation) to speed up DH and RSA calculations (CONFIG_INTERNAL_LIBTOMMATH_FAST=y) * fixed race condition between disassociation event and group key handshake to avoid getting stuck in incorrect state [Bug 261] * fixed opportunistic key caching (proactive_key_caching) ------------------------------------------------------------------- Sun Mar 1 17:03:04 CET 2009 - coolo@suse.de - fix compilation with gcc 4.4 ------------------------------------------------------------------- Mon Feb 9 16:06:44 CET 2009 - hschaa@suse.de - Add wpa_supplicant-respect_no_reply.patch which avoids D-Bus errors if no reply was requested by the caller ------------------------------------------------------------------- Wed Jan 28 14:03:42 CET 2009 - hschaa@suse.de - Avoid unnecessary roaming if the driver (like ipw2100) does not report signal level. This fixes association problems with ipw2100 (bnc#469779). ------------------------------------------------------------------- Wed Jan 28 10:45:19 CET 2009 - hschaa@suse.de - Fix dbus configuration again (bnc#470013, bnc#469530) ------------------------------------------------------------------- Thu Jan 22 17:24:34 CET 2009 - hschaa@suse.de - Add fix_dbus_config.patch (bnc#468392) ------------------------------------------------------------------- Mon Dec 8 15:45:55 CET 2008 - hschaa@suse.de - Add patch wpa_supplicant-hide_secrets-2.patch to _not_ print passwords in clear text when started by NM with enabled debug output ------------------------------------------------------------------- Mon Nov 10 17:35:43 EET 2008 - tambet@novell.com - Fix a bug where authentication would always fail using PKCS#11 interface from DBus control interface. - Add support for PKCS#11 module initialization arguments. ------------------------------------------------------------------- Mon Oct 13 15:11:54 CEST 2008 - hschaa@gmail.com - update wpa_supplicant-roaming.patch which enables roaming by default for some cards ------------------------------------------------------------------- Thu Oct 9 14:42:36 CEST 2008 - hschaa@suse.de - add patches wpa_supplicant-dont_report_empty_initial_scan.patch and wpa_supplicant-restore_scan_request_setting.patch which speed up the initial association with a network when NM is used - Add patch wpa_supplicant-fix_set_mode.patch which fixes an association bug that was triggered when changing the interface mode ------------------------------------------------------------------- Mon Sep 29 13:40:18 CEST 2008 - hschaa@suse.de - add roaming capability (FATE 303806) ------------------------------------------------------------------- Wed Sep 24 00:59:56 CEST 2008 - ro@suse.de - drop buildreq for madwifi (dropped package) ------------------------------------------------------------------- Tue Sep 2 03:05:49 CEST 2008 - ro@suse.de - update to 0.6.4 * added support for EAP Sequences in EAP-FAST Phase 2 * added support for using TNC with EAP-FAST * added driver_ps3 for the PS3 Linux wireless driver * added support for optional cryptobinding with PEAPv0 * fixed the OpenSSL patches (0.9.8g and 0.9.9) for EAP-FAST to allow fallback to full handshake if server rejects PAC-Opaque * added fragmentation support for EAP-TNC * added support for parsing PKCS #8 formatted private keys into the internal TLS implementation (both PKCS #1 RSA key and PKCS #8 encapsulated RSA key can now be used) * added option of using faster, but larger, routines in the internal LibTomMath (for internal TLS implementation) to speed up DH and RSA calculations (CONFIG_INTERNAL_LIBTOMMATH_FAST=y) * fixed race condition between disassociation event and group key handshake to avoid getting stuck in incorrect state [Bug 261] * fixed opportunistic key caching (proactive_key_caching) ------------------------------------------------------------------- Mon Aug 4 12:33:10 CEST 2008 - hschaa@suse.de - Remove patches that are already upstream - Rebase patches to new version - Update to 0.6.3 ------------------------------------------------------------------- Mon May 5 09:52:45 CEST 2008 - schwab@suse.de - Fix mangled error message. ------------------------------------------------------------------- Mon Mar 17 15:06:14 CET 2008 - hschaa@suse.de - Fix system bus activation (bnc#371500) ------------------------------------------------------------------- Tue Mar 11 15:09:29 CET 2008 - hschaa@suse.de - Remove patches that are upstream already - Update to version 0.5.10, changes: * added support for Makefile builds to include debug-log-to-a-file functionality (CONFIG_DEBUG_FILE=y and -f<path> on command line) * added network configuration parameter 'frequency' for setting initial channel for IBSS (adhoc) networks * fixed EAP-SIM and EAP-AKA message parser to validate attribute lengths properly to avoid potential crash caused by invalid messages * added driver_wext workaround for race condition between scanning and association with drivers that take very long time to scan all channels (e.g., madwifi with dual-band cards); wpa_supplicant is now using a longer hardcoded timeout for the scan if the driver supports notifications for scan completion (SIOCGIWSCAN event); this helps, e.g., in cases where wpa_supplicant and madwifi driver ended up in loop where the driver did not even try to associate * fixed EAP-SIM not to include AT_NONCE_MT and AT_SELECTED_VERSION attributes in EAP-SIM Start/Response when using fast reauthentication * fixed problems in getting NDIS events from WMI on Windows 2000 - Changes in 0.5.9: * fixed an integer overflow issue in the ASN.1 parser used by the (experimental) internal TLS implementation to avoid a potential buffer read overflow * fixed a race condition with -W option (wait for a control interface monitor before starting) that could have caused the first messages to be lost * updated EAP Generalized Pre-Shared Key (EAP-GPSK) to use the latest draft (draft-ietf-emu-eap-gpsk-07.txt) * added ctrl_iface RECONNECT (wpa_cli reconnect) command (like reassociate, but only takes effect if already associated) * fixed a possible race condition between wpa_cli reassociate and wpa_cli disconnect * return a non-zero exit code from non-interactive wpa_cli if the command is not recognized or fails * fixed 0.5.8 regressions in BSS selection that prevented wildcard SSID from being used with non-WPA networks and disabled workaround for ignoring bogus WPA/RSN IE in non-WPA configuration * fixed OpenSSL TLS wrapper to clear trusted CA list to allow network blocks to use different trusted CA configurations * fixed a potential EAP state machine loop when mloving from PSK to EAP configuration without restarting wpa_supplicant ------------------------------------------------------------------- Thu Jan 31 13:10:43 CET 2008 - hschaa@suse.de - Fix madwifi support (b.n.c #342670) ------------------------------------------------------------------- Tue Dec 18 18:26:27 CET 2007 - jg@suse.de - Fix two leaks when signalling state and scan results (rh #408141) ------------------------------------------------------------------- Wed Nov 14 13:36:33 CET 2007 - jg@suse.de - enable dbus interface - apply fixes from Dan Williams - build Qt4 version of wpa_gui - dropped gcc 4.3 patch for Qt3 wpa_gui ------------------------------------------------------------------- Mon Nov 12 14:24:33 CET 2007 - ssommer@suse.de - fix build with gcc 4.3 ------------------------------------------------------------------- Tue Jul 24 16:58:12 CEST 2007 - jg@suse.de - update to version 0.5.8, changes: * updated driver_wext.c to build with the current wireless-dev.git tree and net/d80211 changes * updated EAP Generalized Pre-Shared Key (EAP-GPSK) to use the latest draft (draft-ietf-emu-eap-gpsk-03.txt) * fixed 'make install' * fixed EAP-TTLS implementation not to crash on use of freed memory if TLS library initialization fails * fixed EAP-AKA Notification processing to allow Notification to be processed after AKA Challenge response has been sent ------------------------------------------------------------------- Mon Mar 19 19:33:34 CET 2007 - jg@suse.de - adjusted include path for madwifi ------------------------------------------------------------------- Sat Mar 10 17:44:46 CET 2007 - dmueller@suse.de - update to 0.5.7 (#253396): * ChangeLog is under /usr/share/doc/packages/wpa_supplicant/ChangeLog ------------------------------------------------------------------- Mon Nov 6 16:29:14 CET 2006 - jg@suse.de - set IW_ENCODE_TEMP flag (needed to use dynamic WEP with airo driver, bug 185528) ------------------------------------------------------------------- Fri Oct 6 11:52:37 CEST 2006 - jg@suse.de - update to 0.4.9: * fixed EAPOL re-authentication for sessions that used PMKSA caching * reject WPA/WPA2 message 3/4 if it does not include any valid WPA/RSN IE * driver_wext: added support for WE-21 change to SSID configuration * driver_wext: fixed privacy configuration for static WEP keys mode [Bug 140] * driver_wext: added fallback to use SIOCSIWENCODE for setting auth_alg if the driver does not support SIOCSIWAUTH ------------------------------------------------------------------- Fri Mar 24 19:08:20 CET 2006 - jg@suse.de - fixed static WEP key usage (bug 144268) ------------------------------------------------------------------- Thu Feb 16 10:04:31 CET 2006 - jg@suse.de - update to 0.4.8 (bug 151151) * added support for EAP-FAST key derivation using other ciphers than RC4-128-SHA for authentication and AES128-SHA for provisioning * fixed EAP-SIM and EAP-AKA pseudonym and fast re-authentication to decrypt AT_ENCR_DATA attributes correctly * added support for configuring CA certificate as DER file and as a configuration blob * fixed private key configuration as configuration blob and added support for using PKCS#12 as a blob * added support for loading trusted CA certificates from Windows certificate store: ca_cert="cert_store://<name>", where <name> is likely CA (Intermediate CA certificates) or ROOT (root certificates) * fixed TLS library deinitialization after RSN pre-authentication not to disable TLS library for normal authentication * fixed PMKSA cache processing not to trigger deauthentication if the current PMKSA cache entry is replaced with a valid new entry * fixed PC/SC initialization for ap_scan != 1 modes (this fixes EAP-SIM and EAP-AKA with real SIM/USIM card when using ap_scan=0 or ap_scan=2) * do not try to use USIM APDUs when initializing PC/SC for SIM card access for a network that has not enabled EAP-AKA ------------------------------------------------------------------- Sun Feb 5 18:34:21 CET 2006 - ro@suse.de - removed km_wlan from BuildRequires ------------------------------------------------------------------- Wed Jan 25 21:42:51 CET 2006 - mls@suse.de - converted neededforbuild to BuildRequires ------------------------------------------------------------------- Tue Jan 17 19:32:07 CET 2006 - rml@suse.de - Add patch (from upstream) fixing bad drivers that NULL out the SSID and send the wrong length. ------------------------------------------------------------------- Tue Jan 10 12:27:27 CET 2006 - jg@suse.de - added AP scan mode selection via control interface (patch from rml@novell.com) ------------------------------------------------------------------- Mon Nov 21 12:41:52 CET 2005 - jg@suse.de - update to 0.4.7, changes (shortened): * l2_packet_pcap: fixed wired IEEE 802.1X authentication with libpcap and WinPcap to receive frames sent to PAE group address * disable EAP state machine when IEEE 802.1X authentication is not used in order to get rid of bogus "EAP failed" messages * fixed OpenSSL error reporting to go through all pending errors to avoid confusing reports of old errors being reported at later point during handshake * fixed configuration file updating to not write empty variables (e.g., proto or key_mgmt) that the file parser would not accept * fixed ADD_NETWORK ctrl_iface command to use the same default values for variables as empty network definitions read from config file would get * fixed EAP state machine to not discard EAP-Failure messages in many cases (e.g., during TLS handshake) * fixed a infinite loop in private key reading if the configured file cannot be parsed successfully * driver_madwifi: added support for madwifi-ng * wpa_gui: do not display password/PSK field contents * wpa_gui: added CA certificate configuration * use longer timeout for IEEE 802.11 association to avoid problems with drivers that may take more than five second to associate - dropped obsolete madwifi patch - dropped obsolete copy of wireless.h - updated config file - use $RPM_OPT_FLAGS and %jobs - created subpackage wpa_supplicant-gui containing wpa_gui ------------------------------------------------------------------- Tue Nov 8 15:22:13 CET 2005 - jg@suse.de - do not build as root ------------------------------------------------------------------- Fri Nov 4 18:16:50 CET 2005 - jg@suse.de - added support for madwifi-ng - compiling against Wireless Extensions v19 - removed obsolete config option CONFIG_XSUPPLICANT_IFACE ------------------------------------------------------------------- Fri Oct 28 12:25:59 CEST 2005 - jg@suse.de - update to 0.4.6, changes (shortened): * allow fallback to WPA, if mixed WPA+WPA2 networks have mismatch in RSN IE, but WPA IE would match with wpa_supplicant configuration * added support for named configuration blobs in order to avoid having to use file system for external files (e.g., certificates) * fixed RSN pre-authentication * driver_madwifi: set IEEE80211_KEY_GROUP flag for group keys to make sure the driver configures broadcast decryption correctly * added ca_path (and ca_path2) configuration variables that can be used to configure OpenSSL CA path, e.g., /etc/ssl/certs, for using the system-wide trusted CA list * added support for starting wpa_supplicant without a configuration file * added global control interface that can be optionally used for adding and removing network interfaces dynamically * wpa_gui: - try to save configuration whenever something is modified - added WEP key configuration - added possibility to edit the current network configuration * driver_ndis: fixed driver polling not to increase frequency on each received EAPOL frame due to incorrectly cancelled timeout * fixed driver_wext.c to filter wireless events based on ifindex to avoid interfaces receiving events from other interfaces * delay sending initial EAPOL-Start couple of seconds to speed up authentication for the most common case of Authenticator starting EAP authentication immediately after association ------------------------------------------------------------------- Thu Oct 13 16:40:44 CEST 2005 - jg@suse.de - update to 0.4.5, changes (shortened): * added a workaround for clearing keys with ndiswrapper to allow roaming from WPA enabled AP to plaintext one * l2_packet_linux: use socket type SOCK_DGRAM instead of SOCK_RAW for PF_PACKET in order to prepare for network devices that do not use Ethernet headers (e.g., network stack with native IEEE 802.11 frames) * use receipt of EAPOL-Key frame as a lower layer success indication for EAP state machine to allow recovery from dropped EAP-Success frame * driver_wext: add support for WE-19 * added support for multiple configuration backends (CONFIG_BACKEND option); currently, only 'file' is supported (i.e., the format used in wpa_supplicant.conf) * added support for updating configuration ('wpa_cli save_config') * added GET_NETWORK ctrl_iface command ------------------------------------------------------------------- Mon Aug 29 15:26:27 CEST 2005 - jg@suse.de - update to 0.4.4 (bug 112977), changes (shortened): * replaced OpenSSL patch for EAP-FAST support (openssl-tls-extensions.patch) with a more generic and correct patch * allow non-WPA modes (e.g., IEEE 802.1X with dynamic WEP) to be used with drivers that do not support WPA * added support for enabling/disabling networks from the list of all configured networks * added support for adding and removing network from the current configuration * added support for setting network configuration parameters through the control interface * fixed parsing of strings that include both " and # within double quoted area (e.g., "start"#end") * removed interface for external EAPOL/EAP supplicant * fixed build with CONFIG_DNET_PCAP=y on Linux * l2_packet: moved different implementations into separate files * added support for using ap_scan=2 mode with multiple network blocks * fixed a potential issue in RSN pre-authentication ending up using freed memory if pre-authentication times out * added support for querying private key password (EAP-TLS) through the control interface (wpa_cli/wpa_gui) if one is not included in the configuration file * driver_broadcom: fixed couple of memory leaks in scan result processing * EAP-PAX is now registered as EAP type 46 * fixed EAP-PAX MAC calculation * fixed EAP-PAX CK and ICK key derivation * added support for using password with EAP-PAX * added support for arbitrary driver interface parameters through the configuration file with a new driver_param field * added possibility to override l2_packet module with driver interface API (new send_eapol handler) * fixed ctrl_interface_group processing for the case where gid is entered as a number, not group name * driver_test: added support for testing hostapd with wpa_supplicant by using test driver interface without any kernel drivers or network cards * added support for EAP-MSCHAPv2 password retries within the same EAP authentication session * added support for password changes with EAP-MSCHAPv2 * added support for reading additional certificates from PKCS#12 files and adding them to the certificate chain * fixed association with IEEE 802.1X (no WPA) when dynamic WEP keys were used * display EAP Notification messages to user through control interface with "CTRL-EVENT-EAP-NOTIFICATION" prefix * added 'disconnect' command to control interface for setting wpa_supplicant in state where it will not associate before 'reassociate' command has been used * added support for getting scan results through control interface * added support for wired authentication (IEEE 802.1X on wired Ethernet); driver interface 'wired' * added support for sending TLS alerts * added support for 'any' SSID wildcard; if ssid is not configured or is set to an empty string, any SSID will be accepted for non-WPA AP * added support for asking PIN (for SIM) from frontends (e.g., wpa_cli); * added support for using external devices (e.g., a smartcard) for private key operations in EAP-TLS (CONFIG_SMARTCARD=y in .config); * added experimental support for EAP-PAX * added monitor mode for wpa_cli ------------------------------------------------------------------- Mon Jul 11 15:46:53 CEST 2005 - jg@suse.de - update to 0.3.9, changes: * modified the EAP workaround that accepts EAP-Success with incorrect Identifier to be even less strict about verification in order to interoperate with some authentication servers * fixed RSN IE in 4-Way Handshake message 2/4 for the case where Authenticator rejects PMKSA caching attempt and the driver is not using assoc_info events * fixed a possible double free in EAP-TTLS fast-reauthentication when identity or password is entered through control interface * added -P<pid file> argument for wpa_supplicant to write the current process id into a file * driver_madwifi: fixed association in plaintext mode * driver_madwifi: added preliminary support for compiling against 'BSD' branch of madwifi CVS tree * added EAP workaround for PEAPv1 session resumption: allow outer, i.e., not tunneled, EAP-Success to terminate session since; this can be disabled with eap_workaround=0 * driver_ipw: updated driver structures to match with ipw2200-1.0.4 (note: ipw2100-1.1.0 is likely to require an update to work with this) * driver_broadcom: fixed couple of memory leaks in scan result processing - removed pidfile patch in favour of the new upstream implementation ------------------------------------------------------------------- Mon Mar 21 11:36:26 CET 2005 - jg@suse.de - creating directory /var/run/wpa_supplicant when needed (bug 74023) ------------------------------------------------------------------- Mon Feb 14 09:58:59 CET 2005 - jg@suse.de - update to 0.3.8, changes: * fixed EAPOL-Key validation to drop packets with invalid Key Data Length; such frames could have crashed wpa_supplicant due to buffer overflow ------------------------------------------------------------------- Mon Feb 7 17:00:37 CET 2005 - jg@suse.de - update to 0.3.7-pre, changes: * fixed WPA/RSN IE verification in message 3 of 4-Way Handshake when using drivers that take care of AP selection (e.g., when using ap_scan=2) * fixed reprocessing of pending request after ctrl_iface requests for identity/password/otp * fixed ctrl_iface requests for identity/password/otp in Phase 2 of EAP-PEAP and EAP-TTLS * all drivers using driver_wext: set interface up and select Managed mode when starting wpa_supplicant; set interface down when exiting * renamed driver_ipw2100.c to driver_ipw.c since it now supports both ipw2100 and ipw2200 * fixed a busy loop introduced in v0.3.5 for scan result processing when no matching AP is found * added a workaround for an interoperability issue with a Cisco AP when using WPA2-PSK * fixed non-WPA IEEE 802.1X to use the same authentication timeout as WPA with IEEE 802.1X * fixed issues with 64-bit CPUs and SHA1 cleanup in previous version (e.g., segfault when processing EAPOL-Key frames) * fixed EAP workaround and fast reauthentication configuration for RSN pre-authentication * added support for blacklisting APs that fail or timeout authentication in ap_scan=1 mode so that all APs are tried in cases where the ones with strongest signal level are failing authentication * fixed CA certificate loading after a failed EAP-TLS/PEAP/TTLS authentication attempt * added preliminary support for IBSS (ad-hoc) mode configuration * added optional support for GNU Readline and History Libraries for wpa_cli (CONFIG_READLINE) * added couple of workarounds for interoperability issues with a Cisco AP when using WPA2 * fixed private key loading for cases where passphrase is not set * improved recovery from PMKID mismatches by requesting full EAP authentication in case of failed PMKSA caching attempt * driver_ndis: added support for NDIS NdisMIncidateStatus() events * driver_ndis: use ADD_WEP/REMOVE_WEP when configuring WEP keys * added support for driver interfaces to replace the interface name based on driver/OS specific mapping, e.g., in case of driver_ndis, this allows the beginning of the adapter description to be used as the interface name * driver_ndis: enable radio before starting scanning, disable radio when exiting * added KEY_MGMT_802_1X_NO_WPA as a new key_mgmt type so that driver interface can distinguish plaintext and IEEE 802.1X (no WPA) authentication * fixed static WEP key configuration to use broadcast/default type for all keys * driver_ndis: added legacy WPA capability detection for non-WPA2 drivers * added support for setting static WEP keys for IEEE 802.1X without dynamic WEP keying (eapol_flags=0) * added support for reading PKCS#12 (PFX) files (as a replacement for PEM/DER) to get certificate and private key (CONFIG_PKCS12) * added new ap_scan mode, ap_scan=2, for drivers that take care of association, but need to be configured with security policy and SSID, e.g., ndiswrapper and NDIS driver ------------------------------------------------------------------- Thu Jan 13 12:32:51 CET 2005 - jg@suse.de - update to 0.2.6, changes: * added driver interface for Intel ipw2100 driver * fixed a bug in PMKSA cache processing: skip sending of EAPOL-Start only if there is a PMKSA cache entry for the current AP * fixed error handling for case where reading of scan results fails: must schedule a new scan or wpa_supplicant will remain waiting forever * set pairwise/group cipher suite for non-WPA IEEE 802.1X to WEP-104 if keys are not configured to be used; this fixes IEEE 802.1X mode with drivers that use this information to configure whether Privacy bit can be in Beacon frames (e.g., ndiswrapper) * improved downgrade attack detection in IE verification of msg 3/4: verify both WPA and RSN IEs, if present, not only the selected one; reject the AP if an RSN IE is found in msg 3/4, but not in Beacon or Probe Response frame, and RSN is enabled in wpa_supplicant configuration * fixed WPA msg 3/4 processing to allow Key Data field contain other IEs than just one WPA IE * modified association event handler to set portEnabled = FALSE before clearing port Valid in order to reset EAP state machine and avoid problems with new authentication getting ignored because of state machines ending up in AUTHENTICATED/SUCCESS state based on old information - removed obsolete ipw2100 patch - added wpa_supplicant.fig to filelist ------------------------------------------------------------------- Fri Oct 22 12:47:44 CEST 2004 - jg@suse.de - update to 0.2.5, changes: * wpa_cli: fixed parsing of -p <path> command line argument * fixed parsing of wep_tx_keyidx * fixed couple of errors in PCSC handling that could have caused random-looking errors for EAP-SIM * PEAPv1: fixed tunneled EAP-Success reply handling to reply with TLS ACK, not tunneled EAP-Success * PEAPv1: added support for terminating PEAP authentication on tunneled EAP-Success message * PEAPv1: changed phase1 option peaplabel to use default to 0, i.e., to the old label for key derivation; previously, the default was 1, but it looks like most existing PEAPv1 implementations use the old label which is thus more suitable default option * changed SSID configuration in driver_wext.c (used by many driver interfaces) to use ssid_len+1 as the length for SSID since some Linux drivers expect this * fixed couple of unaligned reads in scan result parsing to fix WPA connection on some platforms (e.g., ARM) - disabled madwifi support on ppc ------------------------------------------------------------------- Wed Sep 29 00:36:22 CEST 2004 - jg@suse.de - added support for ipw2100 driver ------------------------------------------------------------------- Tue Aug 31 16:57:27 CEST 2004 - jg@suse.de - added support for writing pid-file ------------------------------------------------------------------- Mon Aug 2 18:52:39 CEST 2004 - jg@suse.de - fixed build on non-x86 platforms ------------------------------------------------------------------- Mon Aug 2 17:35:57 CEST 2004 - jg@suse.de - update to version 0.2.4, important changes: - support for new EAP authentication methods: EAP-TTLS/EAP-MD5-Challenge EAP-TTLS/EAP-GTC EAP-TTLS/EAP-MSCHAPv2 EAP-TTLS/EAP-TLS EAP-TTLS/MSCHAPv2 EAP-TTLS/MSCHAP EAP-TTLS/PAP EAP-TTLS/CHAP EAP-PEAP/TLS EAP-PEAP/GTC EAP-PEAP/MD5-Challenge EAP-GTC EAP-TTLS/EAP-OTP, EAP-PEAPv0/OTP, EAP-PEAPv1/OTP, EAP-OTP - support for ATMEL AT76C5XXX driver - support for madwifi driver - lots of minor changes, see ChangeLog - added km_wlan to needforbuild (driver source of madwifi is needed) ------------------------------------------------------------------- Thu Jun 17 14:40:13 CEST 2004 - jg@suse.de - Initial package
Locations
Projects
Search
Status Monitor
Help
OpenBuildService.org
Documentation
API Documentation
Code of Conduct
Contact
Support
@OBShq
Terms
openSUSE Build Service is sponsored by
The Open Build Service is an
openSUSE project
.
Sign Up
Log In
Places
Places
All Projects
Status Monitor
