File _service:obs_scm:suse-module-tools-16.0.20+2.ob... of Package suse-module-tools

Overview Repositories Revisions Requests Users Attributes Meta

File _service:obs_scm:suse-module-tools-16.0.20+2.obscpio of Package suse-module-tools (Revision 9cd6c726af0725571d48678bdd86bad6)

Currently displaying revision 9cd6c726af0725571d48678bdd86bad6 , Show latest

07070100000000000081A400000000000000000000000162C6946A00000015000000000000000000000000000000000000002700000000suse-module-tools-16.0.20+2/.gitignore*~
\#*
*.rej
*.orig

07070100000001000041ED00000000000000000000000262C6946A00000000000000000000000000000000000000000000002100000000suse-module-tools-16.0.20+2/.obs07070100000002000081A400000000000000000000000162C6946A000005D2000000000000000000000000000000000000002F00000000suse-module-tools-16.0.20+2/.obs/workflows.ymlworkflow:
  steps:
    - branch_package:
        source_project: home:mwilck:suse-module-tools
        source_package: suse-module-tools
        target_project: home:mwilck
    - configure_repositories:
        project: home:mwilck
        repositories:
          - name: openSUSE_Tumbleweed
            paths:
              - target_project: openSUSE:Factory
                target_repository: snapshot
            architectures:
              - x86_64
              - i586
          - name: openSUSE_Leap_15.4
            paths:
              - target_project: openSUSE:Tools
                target_repository: 15.4
              - target_project: openSUSE:Leap:15.4
                target_repository: standard
            architectures:
              - x86_64
          - name: SLE_15_SP4
            paths:
              - target_project: openSUSE:Tools
                target_repository: 15.4
              - target_project: SUSE:SLE-15-SP4:GA
                target_repository: pool
            architectures:
              - x86_64
              - s390x
              - ppc64le
              - aarch64
          - name: SLE_15_SP3
            paths:
              - target_project: openSUSE:Tools
                target_repository: 15.3
              - target_project: SUSE:SLE-15-SP3:GA
                target_repository: pool
            architectures:
              - x86_64
              - s390x
              - ppc64le
              - aarch64
  filters:
    event: pull_request
07070100000003000081A400000000000000000000000162C6946A0000467E000000000000000000000000000000000000002400000000suse-module-tools-16.0.20+2/LICENSE                    GNU GENERAL PUBLIC LICENSE
                       Version 2, June 1991

Copyright (C) 1989, 1991 Free Software Foundation, Inc., <http://fsf.org/>
 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
 Everyone is permitted to copy and distribute verbatim copies
 of this license document, but changing it is not allowed.

Preamble

The licenses for most software are designed to take away your
freedom to share and change it.  By contrast, the GNU General Public
License is intended to guarantee your freedom to share and change free
software--to make sure the software is free for all its users.  This
General Public License applies to most of the Free Software
Foundation's software and to any other program whose authors commit to
using it.  (Some other Free Software Foundation software is covered by
the GNU Lesser General Public License instead.)  You can apply it to
your programs, too.

When we speak of free software, we are referring to freedom, not
price.  Our General Public Licenses are designed to make sure that you
have the freedom to distribute copies of free software (and charge for
this service if you wish), that you receive source code or can get it
if you want it, that you can change the software or use pieces of it
in new free programs; and that you know you can do these things.

To protect your rights, we need to make restrictions that forbid
anyone to deny you these rights or to ask you to surrender the rights.
These restrictions translate to certain responsibilities for you if you
distribute copies of the software, or if you modify it.

For example, if you distribute copies of such a program, whether
gratis or for a fee, you must give the recipients all the rights that
you have.  You must make sure that they, too, receive or can get the
source code.  And you must show them these terms so they know their
rights.

We protect your rights with two steps: (1) copyright the software, and
(2) offer you this license which gives you legal permission to copy,
distribute and/or modify the software.

Also, for each author's protection and ours, we want to make certain
that everyone understands that there is no warranty for this free
software.  If the software is modified by someone else and passed on, we
want its recipients to know that what they have is not the original, so
that any problems introduced by others will not reflect on the original
authors' reputations.

Finally, any free program is threatened constantly by software
patents.  We wish to avoid the danger that redistributors of a free
program will individually obtain patent licenses, in effect making the
program proprietary.  To prevent this, we have made it clear that any
patent must be licensed for everyone's free use or not licensed at all.

The precise terms and conditions for copying, distribution and
modification follow.

GNU GENERAL PUBLIC LICENSE
   TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION

0. This License applies to any program or other work which contains
a notice placed by the copyright holder saying it may be distributed
under the terms of this General Public License.  The "Program", below,
refers to any such program or work, and a "work based on the Program"
means either the Program or any derivative work under copyright law:
that is to say, a work containing the Program or a portion of it,
either verbatim or with modifications and/or translated into another
language.  (Hereinafter, translation is included without limitation in
the term "modification".)  Each licensee is addressed as "you".

Activities other than copying, distribution and modification are not
covered by this License; they are outside its scope.  The act of
running the Program is not restricted, and the output from the Program
is covered only if its contents constitute a work based on the
Program (independent of having been made by running the Program).
Whether that is true depends on what the Program does.

1. You may copy and distribute verbatim copies of the Program's
source code as you receive it, in any medium, provided that you
conspicuously and appropriately publish on each copy an appropriate
copyright notice and disclaimer of warranty; keep intact all the
notices that refer to this License and to the absence of any warranty;
and give any other recipients of the Program a copy of this License
along with the Program.

You may charge a fee for the physical act of transferring a copy, and
you may at your option offer warranty protection in exchange for a fee.

2. You may modify your copy or copies of the Program or any portion
of it, thus forming a work based on the Program, and copy and
distribute such modifications or work under the terms of Section 1
above, provided that you also meet all of these conditions:

a) You must cause the modified files to carry prominent notices
    stating that you changed the files and the date of any change.

b) You must cause any work that you distribute or publish, that in
    whole or in part contains or is derived from the Program or any
    part thereof, to be licensed as a whole at no charge to all third
    parties under the terms of this License.

c) If the modified program normally reads commands interactively
    when run, you must cause it, when started running for such
    interactive use in the most ordinary way, to print or display an
    announcement including an appropriate copyright notice and a
    notice that there is no warranty (or else, saying that you provide
    a warranty) and that users may redistribute the program under
    these conditions, and telling the user how to view a copy of this
    License.  (Exception: if the Program itself is interactive but
    does not normally print such an announcement, your work based on
    the Program is not required to print an announcement.)

These requirements apply to the modified work as a whole.  If
identifiable sections of that work are not derived from the Program,
and can be reasonably considered independent and separate works in
themselves, then this License, and its terms, do not apply to those
sections when you distribute them as separate works.  But when you
distribute the same sections as part of a whole which is a work based
on the Program, the distribution of the whole must be on the terms of
this License, whose permissions for other licensees extend to the
entire whole, and thus to each and every part regardless of who wrote it.

Thus, it is not the intent of this section to claim rights or contest
your rights to work written entirely by you; rather, the intent is to
exercise the right to control the distribution of derivative or
collective works based on the Program.

In addition, mere aggregation of another work not based on the Program
with the Program (or with a work based on the Program) on a volume of
a storage or distribution medium does not bring the other work under
the scope of this License.

3. You may copy and distribute the Program (or a work based on it,
under Section 2) in object code or executable form under the terms of
Sections 1 and 2 above provided that you also do one of the following:

a) Accompany it with the complete corresponding machine-readable
    source code, which must be distributed under the terms of Sections
    1 and 2 above on a medium customarily used for software interchange; or,

b) Accompany it with a written offer, valid for at least three
    years, to give any third party, for a charge no more than your
    cost of physically performing source distribution, a complete
    machine-readable copy of the corresponding source code, to be
    distributed under the terms of Sections 1 and 2 above on a medium
    customarily used for software interchange; or,

c) Accompany it with the information you received as to the offer
    to distribute corresponding source code.  (This alternative is
    allowed only for noncommercial distribution and only if you
    received the program in object code or executable form with such
    an offer, in accord with Subsection b above.)

The source code for a work means the preferred form of the work for
making modifications to it.  For an executable work, complete source
code means all the source code for all modules it contains, plus any
associated interface definition files, plus the scripts used to
control compilation and installation of the executable.  However, as a
special exception, the source code distributed need not include
anything that is normally distributed (in either source or binary
form) with the major components (compiler, kernel, and so on) of the
operating system on which the executable runs, unless that component
itself accompanies the executable.

If distribution of executable or object code is made by offering
access to copy from a designated place, then offering equivalent
access to copy the source code from the same place counts as
distribution of the source code, even though third parties are not
compelled to copy the source along with the object code.

4. You may not copy, modify, sublicense, or distribute the Program
except as expressly provided under this License.  Any attempt
otherwise to copy, modify, sublicense or distribute the Program is
void, and will automatically terminate your rights under this License.
However, parties who have received copies, or rights, from you under
this License will not have their licenses terminated so long as such
parties remain in full compliance.

5. You are not required to accept this License, since you have not
signed it.  However, nothing else grants you permission to modify or
distribute the Program or its derivative works.  These actions are
prohibited by law if you do not accept this License.  Therefore, by
modifying or distributing the Program (or any work based on the
Program), you indicate your acceptance of this License to do so, and
all its terms and conditions for copying, distributing or modifying
the Program or works based on it.

6. Each time you redistribute the Program (or any work based on the
Program), the recipient automatically receives a license from the
original licensor to copy, distribute or modify the Program subject to
these terms and conditions.  You may not impose any further
restrictions on the recipients' exercise of the rights granted herein.
You are not responsible for enforcing compliance by third parties to
this License.

7. If, as a consequence of a court judgment or allegation of patent
infringement or for any other reason (not limited to patent issues),
conditions are imposed on you (whether by court order, agreement or
otherwise) that contradict the conditions of this License, they do not
excuse you from the conditions of this License.  If you cannot
distribute so as to satisfy simultaneously your obligations under this
License and any other pertinent obligations, then as a consequence you
may not distribute the Program at all.  For example, if a patent
license would not permit royalty-free redistribution of the Program by
all those who receive copies directly or indirectly through you, then
the only way you could satisfy both it and this License would be to
refrain entirely from distribution of the Program.

If any portion of this section is held invalid or unenforceable under
any particular circumstance, the balance of the section is intended to
apply and the section as a whole is intended to apply in other
circumstances.

It is not the purpose of this section to induce you to infringe any
patents or other property right claims or to contest validity of any
such claims; this section has the sole purpose of protecting the
integrity of the free software distribution system, which is
implemented by public license practices.  Many people have made
generous contributions to the wide range of software distributed
through that system in reliance on consistent application of that
system; it is up to the author/donor to decide if he or she is willing
to distribute software through any other system and a licensee cannot
impose that choice.

This section is intended to make thoroughly clear what is believed to
be a consequence of the rest of this License.

8. If the distribution and/or use of the Program is restricted in
certain countries either by patents or by copyrighted interfaces, the
original copyright holder who places the Program under this License
may add an explicit geographical distribution limitation excluding
those countries, so that distribution is permitted only in or among
countries not thus excluded.  In such case, this License incorporates
the limitation as if written in the body of this License.

9. The Free Software Foundation may publish revised and/or new versions
of the General Public License from time to time.  Such new versions will
be similar in spirit to the present version, but may differ in detail to
address new problems or concerns.

Each version is given a distinguishing version number.  If the Program
specifies a version number of this License which applies to it and "any
later version", you have the option of following the terms and conditions
either of that version or of any later version published by the Free
Software Foundation.  If the Program does not specify a version number of
this License, you may choose any version ever published by the Free Software
Foundation.

10. If you wish to incorporate parts of the Program into other free
programs whose distribution conditions are different, write to the author
to ask for permission.  For software which is copyrighted by the Free
Software Foundation, write to the Free Software Foundation; we sometimes
make exceptions for this.  Our decision will be guided by the two goals
of preserving the free status of all derivatives of our free software and
of promoting the sharing and reuse of software generally.

NO WARRANTY

11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY
FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW.  EXCEPT WHEN
OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES
PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED
OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.  THE ENTIRE RISK AS
TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU.  SHOULD THE
PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING,
REPAIR OR CORRECTION.

12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING
WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR
REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES,
INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING
OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED
TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY
YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER
PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE
POSSIBILITY OF SUCH DAMAGES.

END OF TERMS AND CONDITIONS

How to Apply These Terms to Your New Programs

If you develop a new program, and you want it to be of the greatest
possible use to the public, the best way to achieve this is to make it
free software which everyone can redistribute and change under these terms.

To do so, attach the following notices to the program.  It is safest
to attach them to the start of each source file to most effectively
convey the exclusion of warranty; and each file should have at least
the "copyright" line and a pointer to where the full notice is found.

{description}
    Copyright (C) {year}  {fullname}

This program is free software; you can redistribute it and/or modify
    it under the terms of the GNU General Public License as published by
    the Free Software Foundation; either version 2 of the License, or
    (at your option) any later version.

This program is distributed in the hope that it will be useful,
    but WITHOUT ANY WARRANTY; without even the implied warranty of
    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
    GNU General Public License for more details.

You should have received a copy of the GNU General Public License along
    with this program; if not, write to the Free Software Foundation, Inc.,
    51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.

Also add information on how to contact you by electronic and paper mail.

If the program is interactive, make it output a short notice like this
when it starts in an interactive mode:

Gnomovision version 69, Copyright (C) year name of author
    Gnomovision comes with ABSOLUTELY NO WARRANTY; for details type `show w'.
    This is free software, and you are welcome to redistribute it
    under certain conditions; type `show c' for details.

The hypothetical commands `show w' and `show c' should show the appropriate
parts of the General Public License.  Of course, the commands you use may
be called something other than `show w' and `show c'; they could even be
mouse-clicks or menu items--whatever suits your program.

You should also get your employer (if you work as a programmer) or your
school, if any, to sign a "copyright disclaimer" for the program, if
necessary.  Here is a sample; alter the names:

Yoyodyne, Inc., hereby disclaims all copyright interest in the program
  `Gnomovision' (which makes passes at compilers) written by James Hacker.

{signature of Ty Coon}, 1 April 1989
  Ty Coon, President of Vice

This General Public License does not permit incorporating your program into
proprietary programs.  If your program is a subroutine library, you may
consider it more useful to permit linking proprietary applications with the
library.  If this is what you want to do, use the GNU Lesser General
Public License instead of this License.
07070100000004000081A400000000000000000000000162C6946A000013BA000000000000000000000000000000000000002600000000suse-module-tools-16.0.20+2/README.md# suse-module-tools

This package contains a collection of tools and configuration files for
handling kernel modules and setting module parameters. The configuration files
represent a carefully engineered, recommended default configuration. In
certain cases, it may be necessary to modify or revert some of these settings.
It's ok to do so, but make sure you know what you're doing if you do.

Please don't edit any of the configuration files shipped in this package.
Instead, copy the files from `/lib/modprobe.d` to `/etc/modprobe.d`, preserving
the file name, and edit the copy under `/etc/modprobe.d`.
Likewise for `/lib/depmod.d` vs. `/etc/depmod.d` and `/usr/lib/modules-load.d` vs.
`/etc/modules-load.d`.

To completely mask the directives in a configuration file, it's recommended
to create a symlink to `/dev/null` with the same name as the file to be masked 
in the respective directory under `/etc`. E.g. to mask 
`/lib/modprobe.d/20-foo.conf`, run

ln -s /dev/null /etc/modprobe.d/20-foo.conf

## Blacklisted file systems

In the Linux kernel, file system types are implemented as kernel
modules. While many of these file systems are well maintained, some of the
older and less frequently used ones are not. This poses a security risk,
because maliciously crafted file system images might open security holes when
mounted either automatically or by an inadvertent user.

These file systems are therefore **blacklisted** by default under openSUSE and
SUSE Enterprise Linux. This means that the on-demand loading of file system
modules at mount time is disabled. Blacklisting is accomplished by placing
configuration files called `60-blacklist_fs-$SOME_FS.conf` under
`/lib/modprobe.d`. The current list of blacklisted filesystems is:

@FS_BLACKLIST@ # will be filled from spec file during package build

### CAVEAT

In the very unlikely case that one of the blacklisted file systems is necessary
for your system to boot, make sure you un-blacklist your file system before
rebooting.

### Un-blacklisting a file system

If a user tries to **mount(8)** a device with a blacklisted file system, the
mount command prints an error message like this:

mount: /mnt/mx: unknown filesystem type 'minix' (hint: possibly blacklisted, see mount(8)).

(**mount(8)** can't distinguish between a file system for which no kernel
module exists at all, and a file system for which a module exists which
is blacklisted).

Users who need the blacklisted file systems and therefore want to override 
the blacklisting can load the blacklisted module directly using `modprobe
$SOME_FS` in a terminal. This will call a script that offers to "un-blacklist"
the module for future use.

# modprobe minix
    unblacklist: *** NOTE: minix will be loaded even if you answer "n" below. ***
    unblacklist: minix is currently blacklisted, do you want to un-blacklist it (y/n)? y
    unblacklist: minix un-blacklisted by creating /etc/modprobe.d/60-blacklist_fs-minix.conf

If the user selects **y**, the module is un-blacklisted by creating a symlink
to `/dev/null` (see above). Future attempts to mount minix file systems will
work with no issue, even after reboot, because the kernel's auto-loading
mechanism works for this file system again. If the user selects **n**, the
module remains blacklisted. Regardless of the user's answer, the module will be
loaded for the time being; i.e. subsequent **mount** commands for devices with
this file system will succeed until the module is unloaded or the system is
rebooted.

For security reasons, it's recommended that you only un-blacklist file system
modules that you know you'll use on a regular basis, and just enable them
temporarily otherwise.

## Weak modules

This package contains the script `weak-modules2` which is necessary to make
3rd party kernel modules installed for one kernel available to
KABI-compatible kernels. SUSE ensures KABI compatibility over the life
time of a service pack in SUSE Enterprise Linux. See the
[SUSE SolidDriver Program](https://drivers.suse.com/doc/SolidDriver/) for
details.

### Capturing log output from weak_modules2

Use the following environment variables:

* WM2_VERBOSE: value from 0 (default, no logging) - 3 (tracing).
   the -v/--verbose option increases log level by one.
 * WM2_DEBUG: 0 (default) or 1. Enables verbose output of certain
   commands called by weak-modules2. Equivalent to --debug.
 * WM2_LOGFILE: redirect the output to the given file.

## Kernel scriptlet files

The scripts in kernel-scriptlets directory are used internally by kernel
packages.

### Capturing log output from kernel scripts

* KERNEL_PACKAGE_SCRIPT_DEBUG when non-empty enables some extra output to kernel log.

## Kernel-specific sysctl settings

This package installs the file `50-kernel-uname_r.conf` which makes sure
that sysctl settings which are recommended for the currently running kernel
are applied by **systemd-sysctl.service** at boot time. These settings are
shipped in the file `/boot/sysctl.conf-$(uname -r)`, which is part of the
kernel package.
07070100000005000081A400000000000000000000000162C6946A000001BA000000000000000000000000000000000000003000000000suse-module-tools-16.0.20+2/boot-sysctl.service[Unit]
Description=Apply Kernel Variables for %v from /boot
DefaultDependencies=no
Conflicts=shutdown.target
Before=systemd-sysctl.service
After=systemd-modules-load.service
ConditionPathExists=!/usr/lib/modules/%v/sysctl.conf
ConditionPathExists=/boot/sysctl.conf-%v
RequiresMountsFor=/boot

[Service]
Type=oneshot
ExecStart=/usr/lib/systemd/systemd-sysctl /boot/sysctl.conf-%v
RemainAfterExit=yes

[Install]
WantedBy=systemd-sysctl.service
07070100000006000081A400000000000000000000000162C6946A000001E5000000000000000000000000000000000000003200000000suse-module-tools-16.0.20+2/depmod-00-system.conf# 
# /etc/depmod.conf - configuration file for the depmod(8) command,
# for its format see depmod.conf(5).
#
# Please don't edit this file, place your settings into the /etc/depmod.d
# directory.

# search order:
# 1 updates/ (KMPs)
# 2 extra/ (KMPs or manually compiled modules)
# 3 weak-updates/ (KMPs built for older kernels)
# 4 kgraft/ (kgraft patches)
# 5 everything else
search updates extra weak-updates kgraft built-in

# do not generate modules.*map files
make_map_files no
07070100000007000081A400000000000000000000000162C6946A00001FEC000000000000000000000000000000000000002C00000000suse-module-tools-16.0.20+2/driver-check.sh#!/bin/bash

VERSION="0.6"
MAINTAINER="Martin Wilck <mwilck@suse.com>"
USAGE="Usage: ${0##*/} [-o|--out output-file]"

errors=0
warnings=0

trap 'rm -rf "$tmp"' EXIT
tmp=$(mktemp -d)

find_usrmerge_boot() {
    local filename=$1
    local kver=$2
    local ext=${3:+."$3"}
    local f

for f in "/usr/lib/modules/$kver/$filename$ext" "/boot/$filename-$kver$ext"
    do
	if [ -e "$f" ]; then
	    echo "$f"
	    return
	fi
    done
    echo "WARNING: find_usrmerge_boot: $filename$ext not found for kernel $kver" >&2
}

find_depmod() {
    local _d

[[ -x "$DEPMOD" ]] && return
    DEPMOD=
    for _d in /usr/sbin /sbin; do
	if [[ -x ${_d}/depmod ]]; then
	    DEPMOD=${_d}/depmod
	    break;
	fi
    done
    if [[ ! "$DEPMOD" ]]; then
	echo "ERROR: depmod is not installed - aborting" >&2
	exit 1
    fi
}

rpm()
{
	# rpm tends to send localized error messages to stdout :-(
	LC_ALL=C command rpm "$@"
}

file_owner()
{
	local f=$1

if (cd "$tmp/rpms"; grep -lFx "$f" *); then
		return
	fi
	rpm -qf "$f"
}

_explain_called=()
explain()
{
	local caller=${BASH_LINENO[0]}

if test -n "${_explain_called[$caller]}"; then
		return
	fi
	_explain_called[$caller]=1
	echo "$*"
}

error()
{
	echo "ERROR: $*"
	let errors++
}

warning()
{
	echo "warning: $*" >&2
	let warnings++
}

check_system()
{
	if test ! -x /usr/lib/module-init-tools/weak-modules2; then
		echo "This tool only works on SLE11 and later systems" >&2
		exit 1
	fi
	if ! zypper search >/dev/null; then
		echo "Cannot run zypper, please correct the above problem" >&2
		exit 1
	fi
}

check_rpm_V()
{
	local attrs flags path

# kernel packages contain the initrd with permissions 0644,
	# but dracut creates initrd with 0600. That's not an error.
	while read attrs flags path; do
	        case $attrs in
		.M.......)
			if [[ "${path#/boot/initrd}" != "$path" && \
				      -f "$path" && \
				       $(stat -c %a "$path") = 600 ]]; then
				    continue
			fi
			;;
		esac
		echo "$attrs $flags $path"
		error "$rpm was not installed correctly (see above)"
	done
}

check_rpm()
{
	local rpm=$1 name=${1%-*-*} out

# ignore changes to %config and %doc files and ignore changed mtimes
	check_rpm_V < <(rpm -V "$rpm" | grep -Ev '^[^ ]{8,}  [cd] |^\.{7}T\.* ')
}

check_kernel_package()
{
	local kernel=$1

if ! rpm -q --qf '%{description}\n' "$kernel" | grep -q '^GIT '; then
		error "$kernel does not look like a SUSE kernel package (no commit id)"
	fi
	if ! rpm -q --qf '%{postin}\n' "$kernel" | egrep -Eq 'weak-modules2|kernel-scriptlets/rpm-post'; then
		error "$kernel does not look like a SUSE kernel package (wrong %post script)"
	fi
}

check_krel()
{
	local krel=$1 system_map module_symvers msg res args bad=false
	local mit_version

system_map=$(find_usrmerge_boot System.map "$krel")
	module_symvers=$(find_usrmerge_boot symvers "$krel" gz)
	if ! test -e "$system_map"; then
		error "$system_map not found"
		bad=true
	fi
	if ! test -e "$module_symvers"; then
		error "$module_symvers not found"
		bad=true
	fi
	if $bad; then
		explain "Each kernel must install System.map and symvers.gz to be able to check module dependencies."
		return
	fi
	set -- $("$DEPMOD" --version | sed -rn 's/.* ([0-9]+)(\.([0-9]+)(\..*)?)?/\1 \3/p')
	if test -n "$1" -a -n "$2"; then
		let "mit_version = $1 * 100 + $2"
	elif test -n "$1" -a \! -n "$2" -a "$1" -gt 3; then
		let "mit_version = $1 * 100"
	else
		warning "Cannot determine module-init-tools version, this is a bug in the script"
		mit_version=0
	fi
	# depmod -E was introduced in 3.10
	if test "$mit_version" -ge 310; then
		gzip -cd <"$module_symvers" >"$tmp/symvers"
		args=(-E "$tmp/symvers")
	else
		args=(-F "$system_map")
	fi
	msg=$("$DEPMOD" -n -e "${args[@]}" "$krel" 2>&1 >/dev/null)
	res=$?
	if test -n "$msg" -o "$res" -ne 0; then
		echo "$msg"
		error "depmod $krel returned errors (exit code $res)"
		explain "depmod must pass without errors otherwise KMP scripts will break"
	fi

}

req_re='^(kernel$[^:]*:kernel[[:alnum:]_]*$|ksym$[^:]*:(struct_module|module_layout)$) = [0-9a-f]+'
check_kmp()
{
	local kmp=$1 prefix prev_krel krel path found_module=false

if ! rpm -q --qf '%{postin}\n' "$kmp" | egrep -Eq 'weak-modules2|kernel-scriptlets/kmp-post'; then
		error "$kmp does not look like a SUSE kernel module package (wrong %post)"
	fi
	if ! rpm -q -R "$kmp" | grep -Eq "$req_re"; then
		error "$kmp does not have proper dependencies"
	fi
	exec 3< <(sed -rn 's:^(/lib/modules)?/([^/]*)/(.*\.ko(\.[gx]z|\.zst)?)$:\1 \2 \3:p' \
		"$tmp/rpms/$kmp")
	while read prefix krel path <&3; do
		found_module=true
		if test "$prefix" != "/lib/modules"; then
			error "$kmp installs modules outside of /lib/modules"
			continue
		fi
		if test -z "$prev_krel"; then
			prev_krel=$krel
		elif test "$prev_krel" != "$krel"; then
			error "$kmp installs modules for multiple kernel versions"
		fi
		case "$path" in
		updates/* | extra/*)
			;;
		weak-updates/*)
			error "$kmp installs modules in weak-updates/ instead of updates/ or extra/"
			explain "The weak-modules directory is reserved for automatically generated symlinks"
			;;
		*)
			error "$kmp installs modules in an invalid directory"
			explain \
"KMPs must install modules in the updates/ or extra/ subdirectories for the
weak-modules2 script to work"
			;;
		esac

done
	if ! $found_module; then
		error "$kmp does not contain any modules"
		explain \
"A KMP must contain it's modules in the rpm filelist, otherwise weak-modules2
will not work"
	fi
}

check_ko()
{
	local ko=$1 kmp bad=false

case "$ko" in
	*/weak-updates/*)
		if test -L "$ko"; then
			return
		fi
	esac
	kmp=$(file_owner "$ko")
	case "$kmp" in
	kernel-* | *-kmp-*) ;;
	*not\ owned\ by\ any\ package)
		error "$ko is not owned by any package"
		bad=true
		;;
	*)
		error "$ko is not packaged as a KMP"
		bad=true
		;;
	esac
	if $bad; then
		explain \
"External kernel modules must be packaged as KMPs, see
http://developer.novell.com/wiki/index.php/Kernel_Module_Packages_Manuals"
	fi
}

options=$(getopt -n "${0##*/}" -o o:h --long out:,help -- "$@")
if test "$?" -ne 0; then
	echo "$USAGE" >&2
	exit 1
fi
eval set -- "$options"
logfile="driver-check-report.txt"
while :; do
	case "$1" in
	-o | --out)
		logfile="$2"
		shift 2
		;;
	-h | --help)
		echo "${0##*/} $VERSION"
		echo "$USAGE"
		echo
		echo "Please report bugs and enhancement requests to $MAINTAINER"
		exit 0
		;;
	--)
		shift
		break
		;;
	esac
done
if test $# -gt 0; then
	echo "Unrecognized arguments: $*" >&2
	echo "$USAGE" >&2
	exit 1
fi

find_depmod
check_system

# set up redirection
if test $logfile != "-"; then
	if test -e "$logfile"; then
		mv -f "$logfile" "$logfile~"
	fi
	if test -e /proc/self; then
		exec 99> >(cat >"$logfile")
		exec 1>&99
		exec 2> >(tee -a /proc/self/fd/99 >&2)
	else
		exec 1>"$logfile"
		exec 2>"$logfile"
		warning "/proc not mounted"
	fi
fi
echo "${0##*/} $VERSION started at $(date -R)" >&2

smt=$(rpm -q --qf '%{n}-%{v}-%{r}\n' module-init-tools) || \
    smt=$(rpm -q --qf '%{n}-%{v}-%{r}\n' suse-module-tools)
check_rpm "$smt"

mkdir -p "$tmp/rpms"
found_kernel=false
for rpm in $(rpm -qa --qf '%{n}-%{v}-%{r}\n' 'kernel-*' '*-kmp-*' | \
		/usr/lib/rpm/rpmsort); do
	case "$rpm" in
	kernel-source-* | kernel-syms-* | kernel-*-debug* | kernel-*-man-* | \
	kernel-*-devel-* | kernel-firmware-* | kernel-coverage-* | \
	kernel-docs-* | kernel-devel-* | kernel-macros-* | kernel-install-tools-*)
		continue
	esac
	# store the filelist to speed up file_owner()
	rpm -ql "$rpm" >"$tmp/rpms/$rpm"
	check_rpm "$rpm"
	case "$rpm" in
	kernel-*)
		check_kernel_package "$rpm"
		found_kernel=true
		;;
	*-kmp-*)
		check_kmp "$rpm"
		;;
	esac
done
if ! $found_kernel; then
	warning "no kernel package found"
fi

for krel in /lib/modules/*/kernel; do
	krel=${krel%/kernel}
	krel=${krel##*/}
	check_krel "$krel"
done

modules=($(find /lib/modules/ -name '*.ko' -o -name '*.ko.[gx]z' -o -name '*.ko.zst'))
for module in "${modules[@]}"; do
	check_ko "$module"
done

echo "Found $errors error(s) and $warnings warning(s)" >&2
if test "$logfile" != -; then
	echo "Report written to $logfile at $(date -R)" >&2
else
	echo "Report finished at $(date -R)" >&2
fi
if test $errors -eq 0; then
	exit 0
else
	exit 1
fi
07070100000008000041ED00000000000000000000000262C6946A00000000000000000000000000000000000000000000002E00000000suse-module-tools-16.0.20+2/kernel-scriptlets07070100000009000081A400000000000000000000000162C6946A00000A76000000000000000000000000000000000000003A00000000suse-module-tools-16.0.20+2/kernel-scriptlets/cert-script#!/bin/sh

op=${0##*-}

ca_check=""
certs=""

while true ; do
    case $1 in
	--ca-check)
	    ca_check="$2"
	    shift
	    ;;
	--certs)
	    certs="$2"
	    shift
	    ;;
	*) break
	    ;;
    esac
    shift
done

is_efi () {
    local msg rc=0

# The below statement fails if mokutil isn't installed or UEFI is unsupported.
# It doesn't fail if UEFI is available but secure boot is off.
    msg="$(mokutil --sb-state 2>&1)" || rc=$?

[ -z "$KERNEL_PACKAGE_SCRIPT_DEBUG" ] || echo "$msg"

return $rc
}

if ! is_efi; then
    [ -z "$KERNEL_PACKAGE_SCRIPT_DEBUG" ] || \
	echo "$0: system doesn't support UEFI, skipping certificate handling" >&2
    exit 0
fi

run_mokutil () {
    [ -z "$KERNEL_PACKAGE_SCRIPT_DEBUG" ] || echo mokutil "$@" >&2
    mokutil "$@"
}

[ -z "$KERNEL_PACKAGE_SCRIPT_DEBUG" ] || echo "cert $op" ca-check: "$ca_check" certs: "$certs" -- "$@" >&2

script_rc=0
case $op in
    pre)
	;;
    post)
	MOK_ARGS=""
	# Only apply CA check on the kernel package certs (bsc#1173115)
	if [ -n "$ca_check" ] && mokutil -h | grep -q "ca-check"; then
	    MOK_ARGS="${MOK_ARGS} --ca-check"
	fi
	# Kernel key needs to be enrolled even if it's in the kernel keyring (bsc#1191480)
	if [ -n "$ca_check" ] && mokutil -h | grep -q "ignore-keyring"; then
	    MOK_ARGS="${MOK_ARGS} --ignore-keyring"
	fi
	# XXX: Only call mokutil if UEFI and shim are used
	for cert in $certs; do
	    cert="/etc/uefi/certs/${cert}.crt"
	    run_mokutil --import "$cert" --root-pw ${MOK_ARGS}
	    rc=$?
	    if [ $rc != 0 ] ; then
		script_rc=$rc
		echo "Failed to import $cert" >&2
	    fi
	done
	;;
    preun)
	for cert in $certs; do
	    cert="/etc/uefi/certs/${cert}.crt"
	    # Here we queue the certificate for de-enrollment. If by postun
	    # the certificate does not exist last kernel using it was
	    # removed and we can queue it for de-enrollment with mokutil.
	    # The .delete file must exist after package is removed so we cannot
	    # add it to the rpm filelist to be removed by rpm. And if script is
	    # interrupted it may remain. Do not fail when it exists (bsc#1191804).
	    ln -f "$cert" "$cert.delete" ||:
	done
	;;
    postun)
	for cert in $certs; do
	    cert="/etc/uefi/certs/${cert}.crt"
	    # If the certificate is now gone there are no users left
	    # queue -> de-enrollment
	    if ! test -e "$cert"; then
		run_mokutil --delete "$cert.delete" --root-pw
		rc=$?
		if [ $rc != 0 ] ; then
		    script_rc=$rc
		    echo "Failed to delete $cert" >&2
		fi
	    fi
	    rm "$cert.delete" || script_rc=$?
	done
	;;
    posttrans)
	;;
    *)
	echo Unknown scriptlet "$op" >&2
	script_rc=255
	;;
esac

exit $script_rc

# vim: set sts=4 sw=4 ts=8 noet:
0707010000000A000081A400000000000000000000000162C6946A00000ABC000000000000000000000000000000000000003B00000000suse-module-tools-16.0.20+2/kernel-scriptlets/inkmp-script#!/bin/bash

op=${0##*-}

name=""
version=""
release=""
kernelrelease=""
flavor=""
variant=""
usrmerged="0"
image=""
certs=""

while true ; do
    case $1 in
	--name)
	    name="$2"
	    shift
	    ;;
	--version)
	    version="$2"
	    shift
	    ;;
	--release)
	    release="$2"
	    shift
	    ;;

--kernelrelease)
	    kernelrelease="$2"
	    shift
	    ;;
	--flavor)
	    flavor="$2"
	    shift
	    ;;
	--variant)
	    variant="$2"
	    shift
	    ;;

--usrmerged)
	    usrmerged="$2"
	    shift
	    ;;
	--image)
	    image="$2"
	    shift
	    ;;
	--certs)
	    certs="$2"
	    shift
	    ;;

*) break
	    ;;
    esac
    shift
done

wm2=/usr/lib/module-init-tools/weak-modules2
nvr="$name"-"$version"-"$release"

if [ "$usrmerged" -ne 0 ] ; then
    modules_dir=/usr/lib/modules/$kernelrelease-$flavor
    system_map=${modules_dir}/System.map
else
    modules_dir=/lib/modules/$kernelrelease-$flavor
    system_map=/boot/System.map-$kernelrelease-$flavor
fi

run_wm2() {
    [ -z "$KERNEL_PACKAGE_SCRIPT_DEBUG" ] || echo wm2 "$@" >&2
    $wm2 "$@"
}

[ -z "$KERNEL_PACKAGE_SCRIPT_DEBUG" ] || \
    echo KMP "$op" name: "$name" version: "$version" release: "$release" \
    kernelrelease: "$kernelrelease" flavor: "$flavor" variant: "$variant" \
    usrmerged: "$usrmerged" image: "$image" certs: "$certs" -- "$@" >&2

script_rc=0

case $op in
    pre)
	;;
    post)
	if [ -x "$wm2" ]; then
	    rpm -ql "$nvr" | INITRD_IN_POSTTRANS=1 run_wm2 --add-kernel-modules $kernelrelease-$flavor || script_rc=$?
	fi
	;;
    preun)
	rpm -ql "$nvr" | sed -n '/\.ko$\.xz\|\.gz\|\.zst$\?$/p' > "/var/run/rpm-$nvr-modules" || script_rc=$?
	;;
    postun)
	mapfile -t modules < "/var/run/rpm-$nvr-modules"
	rm -f "/var/run/rpm-$nvr-modules"

# Only pass modules to weak-modules2 which have actually been removed.
	# Modules can still exist e.g. if a kernel subpackage is updated and
	# only the build number changed (kernel release remained the same);
	# in this case the resulting list of modules will actually be empty.
	# This is similar to the check for $system_map in rpm-script.
	for __i in "${!modules[@]}"; do
	    if [[ -e "${modules[$__i]}" ]]; then
		unset -v modules["$__i"]
	    fi
	done
	if [[ "${#modules[@]}" == 0 ]]; then
	    echo "$nvr: no kernel modules removed" >&2
	    exit 0
	fi
	if [ -x "$wm2" ]; then
	    printf '%s\n' "${modules[@]}" | run_wm2 --remove-kernel-modules $kernelrelease-$flavor || script_rc=$?
	fi
	;;
    posttrans)
	if test -x /usr/lib/module-init-tools/regenerate-initrd-posttrans; then
	    /bin/bash -c 'set +e; /usr/lib/module-init-tools/regenerate-initrd-posttrans' || script_rc=$?
	fi
	;;
    *)
	echo Unknown scriptlet "$op" >&2
	exit 255
	;;
esac

exit $script_rc

# vim: set sts=4 sw=4 ts=8 noet:
0707010000000B000081A400000000000000000000000162C6946A000006D5000000000000000000000000000000000000003900000000suse-module-tools-16.0.20+2/kernel-scriptlets/kmp-script#!/bin/bash

op=${0##*-}

name=""
version=""
release=""
kernelrelease=""
flavor=""
usrmerged=""

while true ; do
    case $1 in
	--name)
	    name="$2"
	    shift
	    ;;
	--version)
	    version="$2"
	    shift
	    ;;
	--release)
	    release="$2"
	    shift
	    ;;

--kernelrelease)
	    kernelrelease="$2"
	    shift
	    ;;
	--flavor)
	    flavor="$2"
	    shift
	    ;;
	--usrmerged)
	    usrmerged="$2"
	    shift
	    ;;

*) break
	    ;;
    esac
    shift
done

wm2=/usr/lib/module-init-tools/weak-modules2
nvr="$name"-"$version"-"$release"

run_wm2() {
    [ -z "$KERNEL_PACKAGE_SCRIPT_DEBUG" ] || echo wm2 "$@" >&2
    $wm2 "$@"
}

[ -z "$KERNEL_PACKAGE_SCRIPT_DEBUG" ] || \
    echo KMP "$op" name: "$name" version: "$version" release: "$release" \
    kernelrelease: "$kernelrelease" flavor: "$flavor" \ usrmerged: "$usrmerged" -- "$@" >&2

script_rc=0

case $op in
    pre)
	;;
    post)
	if [ -x $wm2 ]; then
	    INITRD_IN_POSTTRANS=1 run_wm2 --add-kmp $nvr || script_rc=$?
	fi
	;;
    preun)
	rpm -ql "$nvr" | sed -n '/\.ko$\.xz\|\.gz\|\.zst$\?$/p' > "/var/run/rpm-$nvr-modules" || script_rc=$?
	;;
    postun)
	modules=( $(cat "/var/run/rpm-$nvr-modules") )
	rm -f "/var/run/rpm-$nvr-modules"
	if [ ${#modules[*]} = 0 ]; then
	    echo "WARNING: $nvr does not contain any kernel modules" >&2
	    exit 0
	fi
	if [ -x $wm2 ]; then
	    printf '%s\n' "${modules[@]}" | run_wm2 --remove-kmp "$nvr" || script_rc=$?
	fi
	;;
    posttrans)
	if test -x /usr/lib/module-init-tools/regenerate-initrd-posttrans; then
	    /bin/bash -c 'set +e; /usr/lib/module-init-tools/regenerate-initrd-posttrans' || script_rc=$?
	fi
	;;
    *)
	echo Unknown scriptlet "$op" >&2
	exit 255
	;;
esac

exit $script_rc

# vim: set sts=4 sw=4 ts=8 noet:
0707010000000C000081A400000000000000000000000162C6946A00001FB3000000000000000000000000000000000000003900000000suse-module-tools-16.0.20+2/kernel-scriptlets/rpm-script#!/bin/sh

op=${0##*-}

name=""
version=""
release=""
kernelrelease=""
flavor=""
variant=""
usrmerged="0"
image=""
certs=""

while true ; do
    case $1 in
	--name)
	    name="$2"
	    shift
	    ;;
	--version)
	    version="$2"
	    shift
	    ;;
	--release)
	    release="$2"
	    shift
	    ;;

--kernelrelease)
	    kernelrelease="$2"
	    shift
	    ;;
	--flavor)
	    flavor="$2"
	    shift
	    ;;
	--variant)
	    variant="$2"
	    shift
	    ;;

--usrmerged)
	    usrmerged="$2"
	    shift
	    ;;
	--image)
	    image="$2"
	    shift
	    ;;
	--certs)
	    certs="$2"
	    shift
	    ;;

*) break
	    ;;
    esac
    shift
done

wm2=/usr/lib/module-init-tools/weak-modules2
nvr="$name"-"$version"-"$release"

trigger_purge_kernels() {
    [ -z "$KERNEL_PACKAGE_SCRIPT_DEBUG" ] || echo Triggering purge-kernels >&2
    touch /boot/do_purge_kernels
}

disarm_purge_kernels() {
    [ -z "$KERNEL_PACKAGE_SCRIPT_DEBUG" ] || echo Disarming purge-kernels >&2
    rm -f /boot/do_purge_kernels
}

run_wm2() {
    [ -z "$KERNEL_PACKAGE_SCRIPT_DEBUG" ] || echo wm2 "$@" >&2
    $wm2 "$@"
}

message_install_bl () {
    echo "You may need to setup and install the boot loader using the"
    echo "available bootloader for your platform (e.g. grub, lilo, zipl, ...)."
}

run_bootloader () {
    if [ -f /etc/sysconfig/bootloader ] &&
	[ -f /boot/grub/menu.lst -o \
	-f /etc/lilo.conf      -o \
	-f /etc/elilo.conf     -o \
	-f /etc/zipl.conf      -o \
	-f /etc/default/grub    ]
	then
	    return 0
	else
	    return 1
    fi
}

[ -z "$KERNEL_PACKAGE_SCRIPT_DEBUG" ] || \
    echo "$op" name: "$name" version: "$version" release: "$release" \
    kernelrelease: "$kernelrelease" flavor: "$flavor" variant: "$variant" \
    usrmerged: "$usrmerged" image: "$image" certs: "$certs" -- "$@" >&2

script_rc=0

case $op in
    pre)
	# see bug #259303
	# this script runs when the kernel gets updated with YaST
	# YaST calls rpm always with -U
	# -U replaces all packages with the new one
	# rpm removes the files from the old packages after the postinstall script ran
	# this will double the required space below /boot
	# remove the files from the old packages to make room for the new initrd
	# rpm may complain about low disk space if /boot/vmlinux does not fit
	if [ "$YAST_IS_RUNNING" != "" ]; then
	    mydf="$( POSIXLY_CORRECT=1 df -P /boot/ | awk '/^(\/|-[[:blank:]])/{ print $4}' )"
	    if test "$mydf" != "" ; then
		echo "Free diskspace below /boot: $mydf blocks"
		# echo "512 byte blocks: $(( 2 * 1024 * 20 ))"
		if test "$mydf" -lt  "40960" ; then
		    echo "make room for new kernel '"$flavor"' because there are less than 20MB available."
		    # disabled because it breaks patch rpms
		    #rm -fv /boot/"$image"-*-"$flavor"
		    rm -fv /boot/initrd-*-"$flavor"
		fi
	    fi
	fi

# On AArch64 we switched from 64k PAGE_SIZE to 4k PAGE_SIZE. Unfortunately
	# btrfs can only use file systems created with the same PAGE_SIZE. So we
	# check if the user has any btrfs file systems mounted and refuse to install
	# in that case.
	if [ $( uname -m ) = aarch64 -a \
	    "$( zgrep CONFIG_ARM64_64K_PAGES=y /proc/config.gz )" -a \
	    "$flavor" = default ]; then
	    if [ "$FORCE_4K" = 1 ]; then
		# The user knows what he's doing, let him be.
		exit 0
	    fi

if [ "$YAST_IS_RUNNING" = "instsys" ]; then
		# We're probably test installing the kernel, that should succeed
		exit 0
	    fi

cat >&2 <<-EOF
You are running on a 64kb PAGE_SIZE kernel. The default kernel
switched to 4kb PAGE_SIZE which will prevent it from mounting btrfs
or the swap partition.

To ensure that your system still works, I am refusing to install
this kernel. If you want to force installation regardlesss, reinstall
with the environment variable FORCE_4K set to 1.

To stay with a 64kb PAGE_SIZE kernel, please follow these steps:

$ zypper in kernel-64kb
        [ reboot into the new kernel ]
        $ zypper rm kernel-default

You will then be on the 64kb PAGE_SIZE kernel and can update your
system normally.
EOF

script_rc=1
	fi

[ -z "$certs" ] || /usr/lib/module-init-tools/kernel-scriptlets/cert-$op --ca-check 1 --certs "$certs" "$@" || script_rc=$?
	;;
    post)
	# Flag to trigger /etc/init.d/purge-kernels on next reboot (fate#312018)
	# ... but avoid the first installion (bsc#1180058)
	if [ "$1" -gt 1 ]; then
	    trigger_purge_kernels || script_rc=$?
	fi

for x in /boot/"$image" /boot/initrd; do
	    rm -f $x
	    ln -s ${x##*/}-"$kernelrelease"-"$flavor" $x
	done

if [ "$usrmerged" -ne 0 ] ; then
	    # compat stuff for /boot.
	    # if /boot and /usr are not speparate partitions we can just link
	    # the kernel there to save space. Otherwise copy.
	    if mountpoint -q /boot || mountpoint -q /usr; then
		copy_or_link="cp -a --remove-destination"
		separate_boot='1'
	    else
		copy_or_link="ln -sf"
		separate_boot=""
	    fi
	    # XXX: need to fix suse-module-tools for sysctl.conf and System.map
	    for x in "$image" sysctl.conf System.map config; do
		if [ "$separate_boot" = 1 ] || [ ! -e /boot/$x-"$kernelrelease"-"$flavor" ]; then
		    $copy_or_link .."$modules_dir"/$x /boot/$x-"$kernelrelease"-"$flavor" || script_rc=$?
		    if [ -e "$modules_dir"/.$x.hmac ]; then
			$copy_or_link .."$modules_dir"/.$x.hmac /boot/.$x-"$kernelrelease"-"$flavor".hmac || script_rc=$?
		    fi
		fi
	    done
	fi

# Add symlinks of compatible modules to /lib/modules/$krel/weak-updates/,
	# run depmod and mkinitrd
	if [ -x $wm2 ]; then
	    run_wm2 --add-kernel "$kernelrelease"-"$flavor" || script_rc=$?
	else
	    echo "$wm2 does not exist, please run depmod and mkinitrd manually" >&2
	    script_rc=1
	fi

if [ ! -e /.buildenv ] ; then
	    if [ -f /etc/fstab ] ; then
		# only run the bootloader if the usual bootloader configuration
		# files are there -- this is different on every architecture
		initrd=initrd-"$kernelrelease"-"$flavor"
		if [ "$flavor" = rt ]; then
		    default=force-default
		fi
		if [ -e /boot/$initrd -o ! -e "$modules_dir" ] && \
		    run_bootloader ; then
		    [ -e /boot/$initrd ] || initrd=
		    if [ -x /usr/lib/bootloader/bootloader_entry ]; then
			/usr/lib/bootloader/bootloader_entry \
			    add \
			    "$flavor" \
			    "$kernelrelease"-"$flavor" \
			    "$image"-"$kernelrelease"-"$flavor" \
			    $initrd \
			    $default || script_rc=$?
		    else
			message_install_bl
		    fi
		fi
	    else
		message_install_bl
	    fi
	fi

[ -z "$certs" ] || /usr/lib/module-init-tools/kernel-scriptlets/cert-$op --ca-check 1 --certs "$certs" "$@" || script_rc=$?
	;;
    preun)
	[ -z "$certs" ] || /usr/lib/module-init-tools/kernel-scriptlets/cert-$op --ca-check 1 --certs "$certs" "$@" || script_rc=$?
	;;
    postun)
	# If a kernel package is removed before the next reboot, we assume that the
	# multiversion variable in /etc/zypp/zypp.conf is not configured and we delete
	# the flag again (fate#312018)
	disarm_purge_kernels

if [ -e "$system_map" ]; then
	    # the same package was reinstalled or just rebuilt, otherwise the files
	    # would have been deleted by now
	    # do not remove anything in this case (bnc#533766)
	    exit 0
	fi

# Remove symlinks from "$modules_dir"/weak-updates/.
	if [ -x $wm2 ]; then
	    run_wm2 --remove-kernel "$kernelrelease"-"$flavor"
	fi

# remove fstab check once perl-Bootloader can cope with it
	if [ -f /etc/fstab ]; then
	    if [ -x /usr/lib/bootloader/bootloader_entry ]; then
		/usr/lib/bootloader/bootloader_entry \
		    remove \
		    "$flavor" \
		    "$kernelrelease"-"$flavor" \
		    "$image"-"$kernelrelease"-"$flavor" \
		    initrd-"$kernelrelease"-"$flavor"
	    fi
	fi

[ -z "$certs" ] || /usr/lib/module-init-tools/kernel-scriptlets/cert-$op --ca-check 1 --certs "$certs" "$@"
	;;
    posttrans)
	;;
    *)
	echo Unknown scriptlet "$op" >&2
	exit 255
	;;
esac

exit $script_rc

# vim: set sts=4 sw=4 ts=8 noet:
0707010000000D000081A400000000000000000000000162C6946A00000190000000000000000000000000000000000000003200000000suse-module-tools-16.0.20+2/kernel-sysctl.service[Unit]
Description=Apply Kernel Variables for %v
DefaultDependencies=no
Conflicts=shutdown.target
Before=systemd-sysctl.service
After=systemd-modules-load.service
ConditionPathExists=/usr/lib/modules/%v/sysctl.conf
RequiresMountsFor=/boot

[Service]
Type=oneshot
ExecStart=/usr/lib/systemd/systemd-sysctl /usr/lib/modules/%v/sysctl.conf
RemainAfterExit=yes

[Install]
WantedBy=systemd-sysctl.service
0707010000000E000081A400000000000000000000000162C6946A00001EA8000000000000000000000000000000000000002800000000suse-module-tools-16.0.20+2/kmp-install#!/usr/bin/perl
#
# KMP-INSTALL: Install specified kernel module packages and automatically
#              remove packages providing same-named modules.
#
# Copyright (c) 2014 SUSE
#
# Permission is hereby granted, free of charge, to any person obtaining
# a copy of this software and associated documentation files (the
# "Software"), to deal in the Software without restriction, including
# without limitation the rights to use, copy, modify, merge, publish,
# distribute, sublicense, and/or sell copies of the Software, and to
# permit persons to whom the Software is furnished to do so, subject to
# the following conditions:
#
# The above copyright notice and this permission notice shall be
# included in all copies or substantial portions of the Software.
#
# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
# EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
# MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.
# IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY
# CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT,
# TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE
# SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.

use strict;
use warnings;

use IO::Handle;
use File::Find;

my @zypper_cmd = qw(zypper);

sub print_help {
	print
"Usage: $0 [options] <package> ...
Installs given packages and removes any KMPs that contain conficting module
names. Run 'zypper help install' for the list of valid options. Additionally,
the options --non-interactive and --non-interactive-include-reboot-patches
can be used\n";
}

sub add_package {
	my ($list, $attr) = @_;

return unless $attr->[0] =~ /-kmp-/;
	my $new = {
		name =>    $attr->[0],
		version => $attr->[1],
		arch =>    $attr->[2],
	};
	$new->{repo} = $attr->[3] if defined($attr->[3]);
	# old-version -> new-version
	$new->{version} =~ s/.*->\s*//;
	push(@$list, $new);
}

sub add_module {
	my ($package, $path) = @_;

return unless $path =~ m@^/lib/modules/([^/]+)/.*/([^/]+\.ko(\.[gx]z)?|\.zst)$@;
	my ($version, $name) = ($1, $2);
	$name =~ s/-/_/g;
	$package->{modules} ||= [];
	push(@{$package->{modules}}, "$version/$name");
}

sub query_installed_kmps {
	my $res = shift;
	my %seen;

open(my $pipe, '-|', "rpm", "-qa", "--qf", '[%{n} %{v} %{r} %{arch} %{filenames}\n]', "*-kmp-*");
	while (<$pipe>) {
		chomp;
		my ($n, $v, $r, $a, $file) = split(' ');
		next unless $file =~ m@^/lib/modules/.*/.*/.*\.ko(\.[gx]z|\.zst)?$@;
		my $nvra = "$n-$v-$r.$a";
		if (!exists($seen{$nvra})) {
			add_package($res, [$n, "$v-$r", $a]);
			$seen{$nvra} = $res->[$#$res];
		}
		add_module($seen{$nvra}, $file);
	}
}

sub fetch_packages {
	my $interactive = shift;
	my $new_pkgs = shift;
	my $remove_pkgs = shift;

my @cmd = @zypper_cmd;
	push(@cmd, "--non-interactive") if !$interactive;
	push(@cmd, qw(-vv install --download-only));
	push(@cmd, @_);
	pipe(READ, WRITE);
	my $pid = fork();
	if (!$pid) {
		# child
		close(READ);
		open(STDOUT, ">&WRITE");
		if (!$interactive) {
			open(NULL, '<', "/dev/null");
			open(STDIN, "<&NULL");
			close(NULL);
			open(NULL, '>', "/dev/null");
			open(STDERR, ">&NULL");
			close(NULL);
		}
		exec(@cmd);
	}
	# parent
	close(WRITE);
	my ($len, $buf, $last_line);
	my ($state, @cur_pkg);
	$state = 0;
	$last_line = "";
	my $list;
	STDOUT->autoflush(1);
	while (($len = sysread(READ, $buf, 4096))) {
		print $buf if $interactive;
		my @lines = split(/\n/, $buf, -1);
		$lines[0] = $last_line . $lines[0];
		# XXX: Assumes that the very last line is terminated by \n
		$last_line = pop(@lines);
		for my $l (@lines) {
			if ($state == 0 && $l =~ /^The following.* package.* going to be (installed|upgraded|downgraded|REMOVED):/) {
				if ($1 eq "REMOVED") {
					$list = $remove_pkgs;
				} else {
					$list = $new_pkgs;
				}
				$state = 1;
				next;
			}
			next unless $state == 1;
			if ($l eq "") {
				$state = 0;
				if (@cur_pkg) {
					add_package($list, \@cur_pkg);
				}
				@cur_pkg = ();
				next;
			}
			$l =~ s/ *$//;
			if ($l =~ /^[^ ]/) {
				if (@cur_pkg) {
					add_package($list, \@cur_pkg);
				}
				@cur_pkg = ($l);
			}
			if ($l =~ /^ /) {
				$l =~ s/^ *//;
				push(@cur_pkg, $l);
			}
		}
	}
	STDOUT->autoflush(0);
	close(READ);
	waitpid($pid, 0);
	return $?;
}

my %repo_cache;
sub get_repo_cache {
	my $name = shift;
	my $res;

if (exists($repo_cache{$name})) {
		return $repo_cache{$name};
	}
	open(my $pipe, '-|', "zypper", "repos", $name);
	while (<$pipe>) {
		chomp;
		if (m@^MD Cache Path\s*:\s*(/.*)@) {
			$res = $1;
			$res =~ s:/raw/:/packages/:;
			$res =~ s/\s*$//;
		}
	}
	close($pipe);
	$repo_cache{$name} = $res;
	return $res;
}

sub find_fetched {
	my $packages = shift;
	my %local_packages;

for $a (@_) {
		if ($a =~ /\.rpm$/ && -e $a) {
			open(my $pipe, '-|', "rpm", "-qp", "--qf",
				'%{n}-%{v}-%{r}.%{arch}', $a);
			my $nvra = <$pipe>;
			close($pipe);
			if (defined($nvra)) {
				$local_packages{$nvra} = $a;
			}
		}
	}
	for my $p (@$packages) {
		my $nvra = "$p->{name}-$p->{version}.$p->{arch}";
		if ($p->{repo} eq "Plain RPM files cache") {
			if (exists($local_packages{$nvra})) {
				$p->{path} = $local_packages{$nvra};
			} else {
				print STDERR "Cannot find package $p->{name}\n";
			}
			next;
		}
		my $dir = get_repo_cache($p->{repo});
		if (!$dir) {
			print STDERR "Cannot find zypp cache for repository $p->{repo} (package $p->{name})\n";
			next;
		}
		my $file = "$nvra.rpm";
		my $wanted = sub {
			$p->{path} = $File::Find::name if $_ eq $file;
		};
		find($wanted, $dir);
		if (!$p->{path}) {
			print STDERR "Cannot find $file in zypp cache ($dir)\n";
			next;
		}
	}
	for my $p (@$packages) {
		next unless $p->{path};
		open(my $pipe, '-|', "rpm", "-qlp", $p->{path});
		my @files = <$pipe>;
		close($pipe);
		for my $f (@files) {
			add_module($p, $f);
		}
	}
}

# treat -n, --non-interactive, -0 and --non-interactive-include-reboot-patches
# as global zypper options
my @save_argv = @ARGV;
@ARGV=();
for my $a (@save_argv) {
	if ($a =~ /^-(h|-help)$/) {
		print_help();
		exit 0;
	} elsif ($a =~ /^-(n$|-non-interactive$|0$|-non-interactive-)/) {
		push(@zypper_cmd, $a);
	} else {
		push(@ARGV, $a);
	}
}
if (!@ARGV) {
	print_help();
	exit 1;
}

print "Fetching packages\n";
my (@new_pkgs, @remove_pkgs, @installed_pkgs);
my $ret = fetch_packages(0, \@new_pkgs, \@remove_pkgs, @ARGV);
if ($ret != 0) {
	print "zypper returned an error, retrying in interactive mode\n";
	@new_pkgs = ();
	@remove_pkgs = ();
	$ret = fetch_packages(1, \@new_pkgs, \@remove_pkgs, @ARGV);
}
if ($ret != 0) {
	exit 1;
}
find_fetched(\@new_pkgs, @ARGV);
query_installed_kmps(\@installed_pkgs);

# Do not check packages to be updated/removed for module conflicts
my (%new_pkgs, %remove_pkgs);
for my $p (@remove_pkgs) {
	my $nvra = "$p->{name}-$->{version}.$p->{arch}";
	$remove_pkgs{$nvra} = 1;
}
for my $p (@new_pkgs) {
	$new_pkgs{$p->{name}} = 1;
}
my @tmp = @installed_pkgs;
@installed_pkgs = ();
for my $p (@tmp) {
	my $nvra = "$p->{name}-$->{version}.$p->{arch}";
	next if $new_pkgs{$p->{name}} || $remove_pkgs{$nvra};
	push(@installed_pkgs, $p);
}

# check for conflicts
my %new_modules;
for my $p (@new_pkgs) {
	next unless $p->{modules};
	for my $m (@{$p->{modules}}) {
		$new_modules{$m} = $p->{name};
	}
}
my @conflicting_pkgs;
for my $p (@installed_pkgs) {
	next unless $p->{modules};
	for my $m (@{$p->{modules}}) {
		next unless exists($new_modules{$m});
		print "Package $p->{name} conflicts with new package $new_modules{$m}\n";
		push(@conflicting_pkgs, $p);
		last;
	}
}

# Install new packages, removing conflicting installed packages
my @cmd = (@zypper_cmd, "install", @ARGV);
for my $p (@conflicting_pkgs) {
	push(@cmd, "!$p->{name}.$p->{arch}=$p->{version}");
}
print join(" ", "Running", @cmd), "\n";
if (system(@cmd) != 0) {
	exit 1;
}
exit 0;
0707010000000F000081ED00000000000000000000000162C6946A000006BA000000000000000000000000000000000000002B00000000suse-module-tools-16.0.20+2/lsinitrd-quick#! /bin/bash

trap 'echo error in $BASH_COMMAND >&2; exit 1' ERR

MG_CPIO=$'\x71\xc7'
MG_CPIO1=070701
MG_GZ=$'\x1f\x8b'
MG_GZ1=$'\x1f\x9e'
MG_BZ="BZh"
MG_XZ=$'\xfd7zXZ'
MG_LZ4=$'\x02\x21'
MG_LZO=$'\x89LZO'
MG_ZSTD=$'\x28\xB5\x2F\xFD'

check_fmt() {
    case $1 in
	$MG_CPIO*|$MG_CPIO1)
	    echo cpio;;
	$MG_GZ*|$MG_GZ1*)
	    echo gzip;;
	$MG_BZ*)
	    echo bz2;;
	$MG_XZ*)
	    echo xz;;
	$MG_LZ4*)
	    echo lz4;;
	$MG_LZO*)
	    echo lzo;;
	$MG_ZSTD*)
	    echo zstd;;
    esac
}

uncomp() {
    case $1 in
	$MG_CPIO*|$MG_CPIO1)
	    cat;;
	$MG_GZ*)
	    zcat;;
	$MG_BZ*)
	    bzcat;;
	$MG_XZ*)
	    xzcat;;
	$MG_LZ4*)
	    lz4 -d -c;;
	$MG_LZO*)
	    lzop -d -c;;
	$MG_ZSTD*)
	    zstd -d -c;;
    esac
}

check_size () {
    [[ "$SIZE" -gt $1 ]] || {
	echo "$INITRD: file too small, cannot read magic" >&2
	exit 1
    }
}

INITRD=$1
[[ "$INITRD" && -f "$INITRD" ]] || {
    echo "$INITRD: file not found" >&2
    exit 1
}
SIZE=$(stat -L -c %s "$INITRD")
check_size 6

read -r -d'\0' -n 6 MAGIC <"$INITRD"
FMT=$(check_fmt "$MAGIC")
BYTES=0
if [[ ! $FMT ]]; then
    echo "$INITRD: unknown format" >&2
    exit 1
elif [[ "$FMT" = cpio ]]; then
    # check for "early CPIO" image
    TMPFILE=$(mktemp "${TMPDIR:-/tmp}/initrd-XXXXXX")
    EARLY=$(cpio -t early_cpio "kernel/*/microcode/*.bin" \
		 <"$INITRD" 2>"$TMPFILE")
    BLOCKS=$(cut -d" " -f1 "$TMPFILE")
    rm -f "$TMPFILE"
    if [[ -z "$EARLY" ]]; then
	# just plain uncompressed cpio
	cpio -t <"$INITRD" 2>/dev/null
	exit
    fi
    BYTES=$((512*BLOCKS))
    check_size $((BYTES + 6))
    read -r -d '\0' -n 6 MAGIC \
	 < <(dd if="$INITRD" bs=1b count=1 skip=$BLOCKS 2>/dev/null)
fi

tail -c +$((BYTES + 1)) "$INITRD" | uncomp "$MAGIC" | cpio -t 2>/dev/null
07070100000010000081A400000000000000000000000162C6946A000001E8000000000000000000000000000000000000002A00000000suse-module-tools-16.0.20+2/macros.initrd# Packages installing files and binaries that end up in the initrd should
# call these macros in their post(trans) scriptlets to have the initrd
# regenerated
# See also fate#313506

%regenerate_initrd_post \
	mkdir -p /run/regenerate-initrd/ \
	touch /run/regenerate-initrd/all \
	%nil

%regenerate_initrd_posttrans \
	if test -x /usr/lib/module-init-tools/regenerate-initrd-posttrans; then \
		/bin/bash -c 'set +e; /usr/lib/module-init-tools/regenerate-initrd-posttrans' \
	fi \
	%nil
07070100000011000041ED00000000000000000000000962C6946A00000000000000000000000000000000000000000000002A00000000suse-module-tools-16.0.20+2/modprobe.conf07070100000012000041ED00000000000000000000000262C6946A00000000000000000000000000000000000000000000003200000000suse-module-tools-16.0.20+2/modprobe.conf/aarch6407070100000013000081A400000000000000000000000162C6946A00000069000000000000000000000000000000000000004A00000000suse-module-tools-16.0.20+2/modprobe.conf/aarch64/50-blacklist-efifb.conf# does not work on aarch64 because PCI host bridge driver
# remaps the bars (bsc#996080)
blacklist efifb
07070100000014000041ED00000000000000000000000262C6946A00000000000000000000000000000000000000000000003200000000suse-module-tools-16.0.20+2/modprobe.conf/armv7hl07070100000015000081A400000000000000000000000162C6946A00000053000000000000000000000000000000000000003E00000000suse-module-tools-16.0.20+2/modprobe.conf/armv7hl/40-apm.conf# /dev/apm_bios Advanced Power Management BIOS
install char-major-10-134 /bin/true
07070100000016000041ED00000000000000000000000262C6946A00000000000000000000000000000000000000000000003100000000suse-module-tools-16.0.20+2/modprobe.conf/common07070100000017000081A400000000000000000000000162C6946A00000512000000000000000000000000000000000000004D00000000suse-module-tools-16.0.20+2/modprobe.conf/common/10-unsupported-modules.conf#
# Every kernel module has a flag 'supported'. If this flag is not set loading
# this module will taint your kernel. You will not get much help with a kernel
# problem if your kernel is marked as tainted. In this case you firstly have
# to avoid loading of unsupported modules.
#
# Setting allow_unsupported_modules 1 enables loading of unsupported modules
# by modprobe, setting allow_unsupported_modules 0 disables it. This can
# be overriden using the --allow-unsupported-modules commandline switch.
#
# CAUTION: In SUSE Linux Enterprise products, loading unsupported modules
# is disabled by default. Re-enabling it is discouraged, as it may compromise
# enterprise product supportability.
#
# SLE users, please read the documentation about kernel module support in the
# SUSE Linux Enterprise Server Administration guide:
#
# https://www.suse.com/documentation/sles-15/book_sle_admin/data/sec_admsupport_kernel.html
#
# NOTE: Modules from SUSE partners delivered under the SUSE SolidDriver Program
# are marked as "externally supported". Such modules are not regarded as
# "unsupported" and thus unaffected by the "allow_unsupported_modules" flag.
#
# On openSUSE, the kernel doesn't have the feature to recognize supported modules,
# and this flag has no effect.
allow_unsupported_modules 0
07070100000018000081A400000000000000000000000162C6946A00000015000000000000000000000000000000000000004600000000suse-module-tools-16.0.20+2/modprobe.conf/common/40-alias-autofs.confalias autofs autofs4
07070100000019000081A400000000000000000000000162C6946A0000000F000000000000000000000000000000000000004300000000suse-module-tools-16.0.20+2/modprobe.conf/common/40-alias-nfs.confalias nfs4 nfs
0707010000001A000081A400000000000000000000000162C6946A00000051000000000000000000000000000000000000004600000000suse-module-tools-16.0.20+2/modprobe.conf/common/40-alias-paride.conf# network block device
alias block-major-45      pd
alias block-major-47      pf
0707010000001B000081A400000000000000000000000162C6946A000002D8000000000000000000000000000000000000004600000000suse-module-tools-16.0.20+2/modprobe.conf/common/40-bttv_skip_it.conf# These devices have bt878 chip without PCI Subsystem ID. Without that info bttv
# does not know how to treat them properly. Therefore we disable autoloading of
# modules for these devices.
# See https://bugzilla.novell.com/show_bug.cgi?id=149588
# To enable your device create a hardware configuration file for your device.
# See man hwup for details.
# You will probably have to specify an option to identify your card. Have a
# look in /usr/src/linux/Documentation/video4linux/CARDLIST.bttv.
alias pci:v0000109Ed0000036Esv00000000sd00000000bc04sc00i00 bttv_skip_it
alias pci:v0000109Ed00000878sv00000000sd00000000bc04sc80i00 bttv_skip_it
install bttv_skip_it echo "module alias skipped (bt878 chip without PCI Subsystem ID)"
0707010000001C000081A400000000000000000000000162C6946A00000086000000000000000000000000000000000000003E00000000suse-module-tools-16.0.20+2/modprobe.conf/common/40-cifs.conf# cifs calls load_nls()
# FIXME: determine the proper nls module based on fstab options instead
# SUSE INITRD: cifs REQUIRES nls_utf8
0707010000001D000081A400000000000000000000000162C6946A000001A8000000000000000000000000000000000000005400000000suse-module-tools-16.0.20+2/modprobe.conf/common/50-blacklist-acpi_power_meter.conf# Blacklist acpi_power_meter. The device requires processing ACPI AML code to
# update average power measurement. This may be at a high frequency and has
# been observed executing every 500ms. This has a noticable impact on latency
# sensitive applications that experience delays on workqueue executions. As
# very few applications require the data, blacklist the module by default
# (bnc#974373)
blacklist acpi_power_meter
0707010000001E000081A400000000000000000000000162C6946A00000029000000000000000000000000000000000000004900000000suse-module-tools-16.0.20+2/modprobe.conf/common/50-blacklist-bfusb.conf# Blue Fritz! USB dongle
blacklist bfusb
0707010000001F000081A400000000000000000000000162C6946A0000004E000000000000000000000000000000000000004B00000000suse-module-tools-16.0.20+2/modprobe.conf/common/50-blacklist-dpt_i2o.conf# This module seems to be good for nothing. See bug 129301.
blacklist dpt_i2o
07070100000020000081A400000000000000000000000162C6946A000000AF000000000000000000000000000000000000004900000000suse-module-tools-16.0.20+2/modprobe.conf/common/50-blacklist-evbug.conf# this is a debugging module which should only be loaded manually
# (security sensitive - keystrokes logged to syslog)
# 2021: only shipped on ppc64 / ppc64le
blacklist evbug
07070100000021000081A400000000000000000000000162C6946A000005C5000000000000000000000000000000000000004600000000suse-module-tools-16.0.20+2/modprobe.conf/common/50-blacklist-fb.conf# list all framebuffer drivers, some of them tend to crash during boot
# they are either compiled into the kernel, or vesafb is active
# X works fine without them, rcfbset can load them if really required
#  sed -e '/\/drivers\/video\/.*\.$o\|ko$$/{s@^.*/@@;s@\..*$@@;p};d'
# See also bsc#106715

blacklist backlight
blacklist lcd

# armv7hl still ships these
blacklist sm501fb
# bsc#846218
blacklist udlfb

## 2021: The drivers below aren't shipped any more
# blacklist aty128fb
# blacklist atyfb
# blacklist cyber2000fb
# blacklist g450_pll
# blacklist hgafb
# blacklist i2c-matroxfb
# blacklist i810fb
# blacklist intelfbdrv
# blacklist intelfbhw
# blacklist matroxfb_accel
# blacklist matroxfb_base
# blacklist matroxfb_crtc2
# blacklist matroxfb_DAC1064
# blacklist matroxfb_g450
# blacklist matroxfb_maven
# blacklist matroxfb_misc
# blacklist matroxfb_proc
# blacklist matroxfb_Ti3026
# blacklist mdacon
# blacklist neofb
# blacklist pm2fb
# blacklist pm3fb
# blacklist radeonfb
# blacklist rivafb
# blacklist sisfb
# blacklist sstfb
# blacklist tdfxfb
# blacklist tridentfb
# blacklist vga16fb
# blacklist vgastate
# blacklist kyrofb
# blacklist arcfb
# blacklist cirrusfb
# blacklist gx1fb
# blacklist intelfb
# blacklist macmodes
# blacklist nvidiafb
# blacklist s1d13xxxfb
# blacklist savagefb
# blacklist arkfb
# blacklist carminefb
# blacklist gxfb
# blacklist hecubafb
# blacklist lxfb
# blacklist s3fb
# blacklist viafb
# blacklist vmlfb
# blacklist vt8623fb

07070100000022000081A400000000000000000000000162C6946A00000083000000000000000000000000000000000000004700000000suse-module-tools-16.0.20+2/modprobe.conf/common/50-blacklist-mtd.conf# These mtd drivers should be loaded manually.
# bsc#51815
blacklist amd76xrom
blacklist l440gx
blacklist scb2_flash
blacklist pci
07070100000023000081A400000000000000000000000162C6946A000000E6000000000000000000000000000000000000004D00000000suse-module-tools-16.0.20+2/modprobe.conf/common/50-blacklist-pata_acpi.conf# pata_acpi is useful for certain limited cases but it tries to attach any
# controller with IDE class code causing more harm than good if loaded by
# default.  Blacklist it so that it can be used selectively.
blacklist pata_acpi
07070100000024000081A400000000000000000000000162C6946A00000051000000000000000000000000000000000000004B00000000suse-module-tools-16.0.20+2/modprobe.conf/common/50-blacklist-usbcore.conf# usbcore ... module is loaded implicitly, ignore it otherwise
blacklist usbcore
07070100000025000081A400000000000000000000000162C6946A000000B7000000000000000000000000000000000000004A00000000suse-module-tools-16.0.20+2/modprobe.conf/common/50-blacklist-xircom.conf# tulip ... de4x5, xircom_tulip_cb, dmfe (...) handle same devices
blacklist de4x5
# At least 2.4.3 and later xircom_tulip doesn't have that conflict
# xircom_tulip_cb
blacklist dmfe
07070100000026000081A400000000000000000000000162C6946A00000066000000000000000000000000000000000000004A00000000suse-module-tools-16.0.20+2/modprobe.conf/common/70-softdep-csiostor.conf# bsc#1100989: cxgb4 needs to be loaded before csiostor (Chelsio request)
softdep csiostor pre: cxgb4
07070100000027000081A400000000000000000000000162C6946A00000036000000000000000000000000000000000000004A00000000suse-module-tools-16.0.20+2/modprobe.conf/common/70-softdep-dm_crypt.conf# dm-crypt requires essiv
softdep dm-crypt pre: essiv
07070100000028000081A400000000000000000000000162C6946A000000A3000000000000000000000000000000000000004A00000000suse-module-tools-16.0.20+2/modprobe.conf/common/70-softdep-ehci_hcd.conf# "Warning! ehci_hcd should always be loaded before uhci_hcd and ohci_hcd, not
# after" (bnc#449853)
softdep uhci-hcd pre: ehci-hcd
softdep ohci-hcd pre: ehci-hcd
07070100000029000081A400000000000000000000000162C6946A000000AA000000000000000000000000000000000000004D00000000suse-module-tools-16.0.20+2/modprobe.conf/common/70-softdep-usb_storage.conf# uas devices can be unpredictably a fallback for both drivers must be present
# (bnc#862397)
# but avoid circular dependency (bsc#1168661)
softdep usb_storage post: uas
0707010000002A000081A400000000000000000000000162C6946A000000B4000000000000000000000000000000000000004700000000suse-module-tools-16.0.20+2/modprobe.conf/common/80-options-cdrom.conf# There are repated reports of broken software polling the drive without using
# O_NONBLOCK fighting with the user trying to open the tray (boo#1165047).
options cdrom autoclose=0
0707010000002B000081A400000000000000000000000162C6946A00000075000000000000000000000000000000000000004400000000suse-module-tools-16.0.20+2/modprobe.conf/common/80-options-ch.conf# SCSI changers can take 1h to initialize on module load,
# triggering udev timeouts (bnc#760274).
options ch init=0
0707010000002C000041ED00000000000000000000000262C6946A00000000000000000000000000000000000000000000002F00000000suse-module-tools-16.0.20+2/modprobe.conf/i3860707010000002D000081A400000000000000000000000162C6946A000000C5000000000000000000000000000000000000004300000000suse-module-tools-16.0.20+2/modprobe.conf/i386/40-alias-mwave.conf# Linux ACP modem (Mwave)
# /dev/modems/mwave MWave modem firmware upload
alias char-major-10-219 mwave
# options mwave mwave_3780i_irq=10 mwave_3780i_io=0x130 mwave_uart_irq=3 mwave_uart_io=0x2f8
0707010000002E000081A400000000000000000000000162C6946A0000007D000000000000000000000000000000000000004600000000suse-module-tools-16.0.20+2/modprobe.conf/i386/40-alias-thinkpad.conf# IBM thinkpad tpctl
# see /usr/share/doc/packages/tpctl/
alias char-major-10-170 thinkpad
# options thinkpad enable_smapi=0
0707010000002F000081A400000000000000000000000162C6946A00000053000000000000000000000000000000000000003B00000000suse-module-tools-16.0.20+2/modprobe.conf/i386/40-apm.conf# /dev/apm_bios Advanced Power Management BIOS
install char-major-10-134 /bin/true
07070100000030000081A400000000000000000000000162C6946A00000057000000000000000000000000000000000000003E00000000suse-module-tools-16.0.20+2/modprobe.conf/i386/40-sonypi.conf# sonypi driver (Sony laptops)
alias char-major-10-250 sonypi
options sonypi minor=250
07070100000031000081A400000000000000000000000162C6946A00000020000000000000000000000000000000000000003F00000000suse-module-tools-16.0.20+2/modprobe.conf/i386/40-toshiba.confalias char-major-10-181 toshiba
07070100000032000081A400000000000000000000000162C6946A000000F4000000000000000000000000000000000000004E00000000suse-module-tools-16.0.20+2/modprobe.conf/i386/50-blacklist-i82875p_edac.conf# For some bridges both intel-agp and i82875p_edac are loaded. If i82875p_edac
# is loaded first it will grab the device. Then intel-agp doesn't work.
# Therefore we disable automatic loading of 82875p_edac. (Bug 213840)
blacklist i82875p_edac
07070100000033000041ED00000000000000000000000262C6946A00000000000000000000000000000000000000000000003000000000suse-module-tools-16.0.20+2/modprobe.conf/ppc6407070100000034000081A400000000000000000000000162C6946A00000058000000000000000000000000000000000000004900000000suse-module-tools-16.0.20+2/modprobe.conf/ppc64/80-options-ib_mthca.conf# catas recovery conflicts with eeh (bsc#456389)
options ib_mthca catas_reset_disable=1
07070100000035000041ED00000000000000000000000262C6946A00000000000000000000000000000000000000000000003000000000suse-module-tools-16.0.20+2/modprobe.conf/s390x07070100000036000081A400000000000000000000000162C6946A000001A3000000000000000000000000000000000000004600000000suse-module-tools-16.0.20+2/modprobe.conf/s390x/40-alias-netiucv.conf# Copied over from modprobe.conf.s390
# Dropped obviously outdated statements.
alias iucv0               netiucv
alias iucv1               netiucv
alias iucv2               netiucv
alias iucv3               netiucv
alias iucv4               netiucv
alias iucv5               netiucv
alias iucv6               netiucv
alias iucv7               netiucv
alias iucv8               netiucv
alias iucv9               netiucv
07070100000037000081A400000000000000000000000162C6946A0000001B000000000000000000000000000000000000004400000000suse-module-tools-16.0.20+2/modprobe.conf/s390x/40-alias-xpram.confalias block-major-35 xpram
07070100000038000081A400000000000000000000000162C6946A0000006A000000000000000000000000000000000000004B00000000suse-module-tools-16.0.20+2/modprobe.conf/s390x/50-blacklist-chsc_sch.conf# Blacklist the IBM s390 module for I/O dynamic configuration support
# Bug bnc#478601
blacklist chsc_sch
07070100000039000081A400000000000000000000000162C6946A000000F7000000000000000000000000000000000000004B00000000suse-module-tools-16.0.20+2/modprobe.conf/s390x/70-softdep-virtio_gpu.conf# The framebuffer console is built as a module on s390, because it is
# useful only to a KVM guest. But then it should be loaded together
# with the corresponding DRM driver.
# SUSE INITRD: virtio_gpu REQUIRES fbcon
softdep virtio_gpu post: fbcon
0707010000003A000041ED00000000000000000000000262C6946A00000000000000000000000000000000000000000000003100000000suse-module-tools-16.0.20+2/modprobe.conf/x86_640707010000003B000081A400000000000000000000000162C6946A00000022000000000000000000000000000000000000004700000000suse-module-tools-16.0.20+2/modprobe.conf/x86_64/40-alias-parport.confalias parport_lowlevel parport_pc
0707010000003C000081A400000000000000000000000162C6946A0000004B000000000000000000000000000000000000004C00000000suse-module-tools-16.0.20+2/modprobe.conf/x86_64/40-alias-qemu-acpiphp.conf# QEMU/KVM can handle ACPI Hotplugging
alias dmi:bvnQEMU:bvrQEMU:* acpiphp
0707010000003D000081A400000000000000000000000162C6946A00000134000000000000000000000000000000000000004800000000suse-module-tools-16.0.20+2/modprobe.conf/x86_64/50-blacklist-isst.conf# Intel Speed Select Technology (ISST)
# The isst_if_mbox_msr driver uses a modalias based on CPU family and model,
# which is too unspecific. On large systems, this causes a lot of failing
# modprobe attempts for this driver, leading to slow or even stalled boot
# (bsc#1187196).
blacklist isst_if_mbox_msr
0707010000003E000081A400000000000000000000000162C6946A00000045000000000000000000000000000000000000004A00000000suse-module-tools-16.0.20+2/modprobe.conf/x86_64/70-softdep-ata_piix.conf# ata_piix can't handle ICH6 in AHCI mode
softdep ata_piix pre: ahci
0707010000003F000041ED00000000000000000000000262C6946A00000000000000000000000000000000000000000000002B00000000suse-module-tools-16.0.20+2/modules-load.d07070100000040000081A400000000000000000000000162C6946A0000003D000000000000000000000000000000000000003300000000suse-module-tools-16.0.20+2/modules-load.d/sg.conf# Ensure that the sg driver is loaded early (bsc#1036463)
sg
07070100000041000081A400000000000000000000000162C6946A000004E3000000000000000000000000000000000000003800000000suse-module-tools-16.0.20+2/regenerate-initrd-posttrans#!/bin/sh
#
# Packages that install kernels or kernel-modules create a flag
#
#   /run/regenerate-initrd/<kernel image>
# 
# to have the initrd for <kernel image> generated, or
#
#   /run/regenerate-initrd/all
#
# to have all initrds generated. This script is called from posttrans
# and takes care of generating the initrds

: ${DRACUT:=/usr/bin/dracut}
if [ ! -x "$DRACUT" ]; then
    echo "${0##*/}: dracut is not installed, not rebuilding the initrd" >&2
    exit 0
fi

dir=/run/regenerate-initrd

if ! test -d "$dir"; then
	exit 0
fi
for f in "$dir"/*; do
	case $f in
	    "$dir/*")
		[ -e "$f" ] || break;;
	esac
	# check if we are in a build chroot
	if ! [  -f /etc/fstab -a ! -e /.buildenv -a -x "$DRACUT" ] ; then
		echo "Please run \"$DRACUT -f --regenerate-all\" as soon as your system is complete." >&2
		rm "$dir"/*
		exit 0
	fi
	break
done

if test -e "$dir/all"; then
	rm "$dir"/*
	"$DRACUT" -f --regenerate-all
	exit
fi
err=0
for f in "$dir"/*; do
	case $f in
	    "$dir/*")
		[ -e "$f" ] || break;;
	esac
	rm "$f"
	image=${f##*/}
	kver=${image#*-}
	if ! test -e "/boot/$image"; then
		echo "$0: /boot/$image does not exist, initrd won't be generated"
		continue
	fi
	if ! "$DRACUT" -f --kver "$kver"; then
		err=$?
	fi
done
exit $err
07070100000042000081A400000000000000000000000162C6946A0000005D000000000000000000000000000000000000003800000000suse-module-tools-16.0.20+2/suse-module-tools.rpmlintrc# The package installs different configs for different architectures
addFilter("no-binary");
07070100000043000081A400000000000000000000000162C6946A00002785000000000000000000000000000000000000003300000000suse-module-tools-16.0.20+2/suse-module-tools.spec#
# spec file for package suse-module-tools
#
# Copyright (c) 2021 SUSE LLC
#
# All modifications and additions to the file contributed by third parties
# remain the property of their copyright owners, unless otherwise agreed
# upon. The license for this file, and modifications and additions to the
# file, is the same license as for the pristine package itself (unless the
# license for the pristine package is not an Open Source License, in which
# case the license is the MIT License). An "Open Source License" is a
# license that conforms to the Open Source Definition (Version 1.9)
# published by the Open Source Initiative.

# Please submit bugfixes or comments via https://bugs.opensuse.org/
#

# missing in SLE15 (systemd-rpm-macros)
%{!?_modulesloaddir: %global _modulesloaddir /usr/lib/modules-load.d}

# Location for modprobe and depmod .conf files
#
# This assumes post-usr-merge (20210527) for Tumbleweed
%if 0%{?suse_version} >= 1550
%global modprobe_dir /usr/lib/modprobe.d
%global depmod_dir /usr/lib/depmod.d
%global with_kernel_sysctl 1
# boot_sysctl may be dropped on TW when we can assume that nobody keeps
# kernel packages around that store sysctl files under /boot
%bcond_without boot_sysctl
%else
%global modprobe_dir /lib/modprobe.d
%global depmod_dir /lib/depmod.d
%global with_boot_sysctl 1
%endif
%global sysctl_dropin %{_unitdir}/systemd-sysctl.service.d/50-kernel-uname_r.conf
%global systemd_units %{?with_boot_sysctl:boot-sysctl.service} %{?with_kernel_sysctl:kernel-sysctl.service}

# List of legacy file systems to be blacklisted by default
%global fs_blacklist adfs affs bfs befs cramfs efs erofs exofs freevxfs hfs hpfs jfs minix nilfs2 ntfs omfs qnx4 qnx6 sysv ufs

# List of all files installed under modprobe.d
# Note: this list contains files installed by previous versions, like 00-system-937216.conf!
%global modprobe_conf_files 00-system 00-system-937216 10-unsupported-modules 50-blacklist 60-blacklist_fs-* 99-local
%global modprobe_conf_rpmsave %(echo "%{modprobe_conf_files}" | sed 's,\$[^ ]*\$,%{_sysconfdir}/modprobe.d/\\1.conf.rpmsave,g')

Name:           suse-module-tools
Version:        16.0.20
Release:        0
Summary:        Configuration for module loading and SUSE-specific utilities for KMPs
License:        GPL-2.0-or-later
Group:          System/Base
URL:            https://github.com/openSUSE/suse-module-tools
Source0:        %{name}-%{version}.tar.xz
Source1:        %{name}.rpmlintrc
BuildRequires:  systemd-rpm-macros
Requires:       /usr/bin/grep
Requires:       /usr/bin/gzip
Requires:       /usr/bin/sed
Requires:       coreutils
Requires:       findutils
Requires:       systemd-rpm-macros
Requires:       rpm
Requires(post): /usr/bin/grep
Requires(post): /usr/bin/sed
Requires(post): coreutils
Provides:       suse-kernel-rpm-scriptlets = 0
Provides:       udev-extra-rules = 0.3.0
Obsoletes:      udev-extra-rules < 0.3.0
Provides:       system-tuning-common-SUSE = 0.3.0
Obsoletes:      system-tuning-common-SUSE < 0.3.0
# Use weak dependencies for dracut and kmod in order to
# keep Ring0 lean. In normal deployments, these packages
# will be available anyway.
Recommends:     dracut
Recommends:     kmod
# This release requires the dracut module 90nvdimm
Conflicts:      dracut < 49.1
# TW: conflict with pre-usrmerge
%if 0%{?suse_version} >= 1550
Conflicts:      filesystem < 15.5-40.2
%endif

%description
This package contains helper scripts for KMP installation and
uninstallation, as well as default configuration files for depmod and
modprobe.

%package legacy
Summary:        Legacy "weak-modules" script for Code10
Group:          System/Base
Requires:       %{name}
Requires:       binutils
Supplements:    dkms

%description legacy
This package contains the legacy "weak-modules" script for kernel
module package (KMP) support. It was replaced by "weak-modules2" in
SLE 11 and later. It is still used by the DKMS module packaging framework.

%prep
%setup -q

%build
sed -i 's/@FS_BLACKLIST@.*/%{fs_blacklist}/' README.md

%install
install -d -m 755 "%{buildroot}%{modprobe_dir}"
install -d -m 755 "%{buildroot}%{_sysconfdir}/modprobe.d"
# keep /etc clean on Tumbleweed
%if 0%{?suse_version} < 1550
cat > "%{buildroot}%{_sysconfdir}/modprobe.d/README" <<EOF
Local configuration for modprobe(8)
===================================

The distribution-provided modprobe configuration files have moved to %{modprobe_dir}.
To modify the configuration, copy files from %{modprobe_dir} to this directory
(%{_sysconfdir}/modprobe.d) and edit them here.

See also %{modprobe_dir}/README, %{_defaultdocdir}/%{name}/README.md, and the
man page modprobe.d(5).
EOF
%endif
install -pm644 -t "%{buildroot}%{modprobe_dir}" modprobe.conf/common/*.conf
if [ -d modprobe.conf/%{_arch} ]; then
    install -pm644 -t "%{buildroot}%{modprobe_dir}" modprobe.conf/%{_arch}/*.conf
fi
%ifarch i386
install -pm644 -t "%{buildroot}%{modprobe_dir}" modprobe.conf/x86_64/*.conf
%endif
%ifarch ppc64le
install -pm644 -t "%{buildroot}%{modprobe_dir}" modprobe.conf/ppc64/*.conf
%endif

install -d -m 755 "%{buildroot}/%{depmod_dir}"
install -d -m 755 "%{buildroot}%{_sysconfdir}/depmod.d"
install -pm 644 "depmod-00-system.conf" "%{buildroot}%{depmod_dir}/00-system.conf"

# "/usr/lib/module-init-tools" name hardcoded in KMPs, mkinitrd, etc.
install -d -m 755 "%{buildroot}/usr/lib/module-init-tools"
install -pm 755 -t "%{buildroot}/usr/lib/module-init-tools/" \
	weak-modules{,2} driver-check.sh unblacklist lsinitrd-quick

%if 0%{?suse_version} < 1550
# rpm macros and helper
# The RPM Macros have been moved to the package rpm-config-SUSE after CODE15, thus are no longer
# shipped here
install -d -m 755 "%{buildroot}%{_rpmmacrodir}"
install -pm 644 "macros.initrd" "%{buildroot}%{_rpmmacrodir}"
%endif
install -pm 755 "regenerate-initrd-posttrans" "%{buildroot}/usr/lib/module-init-tools/"
install -d -m 755 "%{buildroot}/usr/lib/module-init-tools/kernel-scriptlets"
install -pm 755 "kernel-scriptlets/cert-script" "%{buildroot}/usr/lib/module-init-tools/kernel-scriptlets"
install -pm 755 "kernel-scriptlets/inkmp-script" "%{buildroot}/usr/lib/module-init-tools/kernel-scriptlets"
install -pm 755 "kernel-scriptlets/kmp-script" "%{buildroot}/usr/lib/module-init-tools/kernel-scriptlets"
install -pm 755 "kernel-scriptlets/rpm-script" "%{buildroot}/usr/lib/module-init-tools/kernel-scriptlets"
for i in "pre" "preun" "post" "posttrans" "postun" ; do
    ln -s cert-script %{buildroot}/usr/lib/module-init-tools/kernel-scriptlets/cert-$i
    ln -s inkmp-script %{buildroot}/usr/lib/module-init-tools/kernel-scriptlets/inkmp-$i
    ln -s kmp-script %{buildroot}/usr/lib/module-init-tools/kernel-scriptlets/kmp-$i
    ln -s rpm-script %{buildroot}/usr/lib/module-init-tools/kernel-scriptlets/rpm-$i
done

install -d -m 755 "%{buildroot}%{_prefix}/bin"
install -pm 755 kmp-install "%{buildroot}%{_bindir}/"

# systemd service(s) to load kernel-specific sysctl settings
install -d -m 755 "%{buildroot}%{_unitdir}/systemd-sysctl.service.d"
echo '[Unit]' >"%{buildroot}%{sysctl_dropin}"
%if %{with kernel_sysctl}
install -pm 644 kernel-sysctl.service "%{buildroot}%{_unitdir}"
echo 'Wants=kernel-sysctl.service' >>"%{buildroot}%{sysctl_dropin}"
%endif
%if %{with boot_sysctl}
install -pm 644 boot-sysctl.service "%{buildroot}%{_unitdir}"
echo 'Wants=boot-sysctl.service' >>"%{buildroot}%{sysctl_dropin}"
%endif

install -d -m 755 "%{buildroot}%{_modulesloaddir}"
install -pm 644 -t "%{buildroot}%{_modulesloaddir}" modules-load.d/*.conf

%ifarch ppc64 ppc64le
install -d -m 755 %{buildroot}/usr/lib/systemd/system-generators
install -pm 755 udev-trigger-generator %{buildroot}/usr/lib/systemd/system-generators
%endif

# udev rules (formerly system-tuning-common-SUSE, udev-extra-rules)
install -d -m 755 %{buildroot}%{_udevrulesdir}
install -pm 644 udevrules/*.rules %{buildroot}%{_udevrulesdir}

mkdir -p %{buildroot}%{_defaultlicensedir}

%if 0%{?suse_version} >= 1550 || 0%{?sle_version} >= 150100
for mod in %{fs_blacklist}; do
    echo "\
# DO NOT EDIT THIS FILE!
#
# The $mod file system is blacklisted by default because it isn't actively
# supported by SUSE, not well maintained, or may have security vulnerabilites.
blacklist $mod
# The filesystem can be un-blacklisted by running \"modprobe $mod\".
# See README.md in the %{name} package for details.
install $mod /usr/lib/module-init-tools/unblacklist $mod; /sbin/modprobe --ignore-install $mod
" \
	>%{buildroot}%{modprobe_dir}/60-blacklist_fs-"$mod".conf
done
%endif

%pre
%service_add_pre %{systemd_units}
# Avoid restoring old .rpmsave files in %posttrans
for f in %{modprobe_conf_rpmsave}; do
    if [ -f ${f} ]; then
	mv -f ${f} ${f}.%{name}
    fi
done
if [ -f %{_sysconfdir}/depmod.d/00-system.conf.rpmsave ]; then
    mv -f %{_sysconfdir}/depmod.d/00-system.conf.rpmsave \
          %{_sysconfdir}/depmod.d/00-system.conf.rpmsave.%{name}
fi
exit 0

%post
%udev_rules_update
%service_add_post %{systemd_units}
exit 0

%preun
%service_del_preun %{systemd_units}
exit 0

%postun
%udev_rules_update
%service_del_postun_without_restart %{systemd_units}
exit 0

%posttrans
# If the user had modified any of the configuration files installed under
# /etc, they'll now be renamed to .rpmsave files. Restore them.
for f in %{modprobe_conf_rpmsave}; do
    if [ -f ${f} ]; then
	mv -fv ${f} ${f%.rpmsave}
    fi
done
if [ -f %{_sysconfdir}/depmod.d/00-system.conf.rpmsave ]; then
    mv -fv %{_sysconfdir}/depmod.d/00-system.conf.rpmsave \
           %{_sysconfdir}/depmod.d/00-system.conf
fi
exit 0

%files
%defattr(-,root,root)

%license LICENSE
%doc README.md
%{modprobe_dir}
%dir %{_sysconfdir}/modprobe.d
%{depmod_dir}
%dir %{_sysconfdir}/depmod.d
%if 0%{?suse_version} < 1550
%{_sysconfdir}/modprobe.d/README
%{_rpmmacrodir}/macros.initrd
%endif
%{_bindir}/kmp-install
/usr/lib/module-init-tools
%exclude /usr/lib/module-init-tools/weak-modules
%{_unitdir}/*.service
%{_unitdir}/systemd-sysctl.service.d
%{_modulesloaddir}
%{_udevrulesdir}
%ifarch ppc64 ppc64le
/usr/lib/systemd/system-generators
%endif

%files legacy
%defattr(-,root,root)
/usr/lib/module-init-tools/weak-modules

%changelog
07070100000044000081A400000000000000000000000162C6946A000003F3000000000000000000000000000000000000003300000000suse-module-tools-16.0.20+2/udev-trigger-generator#! /bin/bash
# Copyright (c) 2020 SUSE LLC
# SPDX-License-Identifier: GPL-2.0-or-later
#
# bsc#1174287: On PowerPC, exclude memory devices from udev coldplug
#
# This generator creates a drop-in for systemd-udev-trigger.service
# that overrides the default action, skipping coldplug for memory devices.

export PATH=/usr/bin
# /tmp may not be writable yet. Use a different TMPDIR that's guaranteed
# to be writable. Needed for the "here-document" below.
export TMPDIR=/dev/shm
trap 'echo $0: error in "$BASH_COMMAND" >&2' ERR

[[ $(uname -m) = ppc64le ]] || [[ $(uname -m) = ppc64 ]] || exit 0
case $(systemd-detect-virt) in
    none|powervm) ;;
    *) exit 0;;
esac

DIR=$1
[[ $DIR && -d "$DIR" ]]
DROPIN="$DIR/systemd-udev-trigger.service.d"
mkdir -p "$DROPIN"
cat >"$DROPIN/30-skip-memory-devices.conf" <<EOF
# generated by $0
[Service]
ExecStart=
ExecStart=/usr/bin/udevadm trigger --type=subsystems --action=add
ExecStart=/usr/bin/udevadm trigger --type=devices --action=add --subsystem-nomatch=memory
EOF
07070100000045000041ED00000000000000000000000262C6946A00000000000000000000000000000000000000000000002600000000suse-module-tools-16.0.20+2/udevrules07070100000046000081A400000000000000000000000162C6946A00000797000000000000000000000000000000000000003A00000000suse-module-tools-16.0.20+2/udevrules/42-usb-hid-pm.rules# do not edit this file, it will be overwritten on update
#
# Enable autosuspend for qemu emulated usb hid devices

# Note that there are buggy qemu versions (0.13 & older) which
# advertise remote wakeup support but don't actually implement
# it correctly.  This is the reason why we need a match for the
# serial number here.  Old, broken versions have serial "1".
# It has been changed to "42" after fixing the bug to indicate
# remote wakeup is working.
ACTION=="add", SUBSYSTEM=="usb", ATTR{product}=="QEMU USB Mouse", ATTR{serial}!="1", TEST=="power/control", ATTR{power/control}="auto"
ACTION=="add", SUBSYSTEM=="usb", ATTR{product}=="QEMU USB Tablet", ATTR{serial}!="1", TEST=="power/control", ATTR{power/control}="auto"
ACTION=="add", SUBSYSTEM=="usb", ATTR{product}=="QEMU USB Keyboard", ATTR{serial}!="1", TEST=="power/control", ATTR{power/control}="auto"

# Dell DRAC 4
ACTION=="add", SUBSYSTEM=="usb", ATTR{idVendor}=="413c", ATTR{idProduct}=="2500", TEST=="power/control", ATTR{power/control}="auto"

# Dell DRAC 5
ACTION=="add", SUBSYSTEM=="usb", ATTR{idVendor}=="413c", ATTR{idProduct}=="0000", TEST=="power/control", ATTR{power/control}="auto"

# IBM remote access
ACTION=="add", SUBSYSTEM=="usb", ATTRS{idVendor}=="04b3", ATTR{idProduct}=="4012", TEST=="power/control", ATTR{power/control}="auto"

# Raritan Computer, Inc KVM.
ACTION=="add", SUBSYSTEM=="usb", ATTR{idVendor}=="14dd", ATTR{idProduct}=="0002", TEST=="power/control", ATTR{power/control}="auto"

# USB HID devices that are internal to the machine should also be safe to autosuspend

ACTION=="add", SUBSYSTEM=="usb", SUBSYSTEMS=="usb", ATTRS{removable}=="removable", GOTO="usb_hid_pm_end"
ACTION=="add", SUBSYSTEM=="usb", SUBSYSTEMS=="usb", ATTRS{removable}=="unknown", GOTO="usb_hid_pm_end"

ACTION=="add", SUBSYSTEM=="usb", ATTR{bInterfaceClass}=="03", ATTRS{removable}=="fixed", TEST=="../power/control", ATTR{../power/control}="auto"

LABEL="usb_hid_pm_end"
07070100000047000081A400000000000000000000000162C6946A00000926000000000000000000000000000000000000003C00000000suse-module-tools-16.0.20+2/udevrules/60-io-scheduler.rules# Set optimal IO schedulers for HDD and SSD
# Copyright (c) 2021 SUSE LLC

# ## DO NOT EDIT. ##
# To modify the rules, copy this file to /etc/udev/rules.d/60-io-scheduler.rules
# and edit the copy.
# Please read the section "Tuning I/O performance" in the System Analysis and Tuning Guide
# from the SUSE Documentation.

# --- DO NOT EDIT THIS PART ----
SUBSYSTEM!="block", GOTO="scheduler_end"
ACTION!="add|change", GOTO="scheduler_end"
ENV{DEVTYPE}!="disk", GOTO="scheduler_end"

# For dm devices, the relevant events are "change" events, see 10-dm.rules
ACTION!="change", KERNEL=="dm-*", GOTO="scheduler_end"
# "none" with no brackets means scheduler isn't configurable
ATTR{queue/scheduler}=="none", GOTO="scheduler_end"
# keep our hands off zoned devices, the kernel auto-configures them
ATTR{queue/zoned}!="none", GOTO="scheduler_end"
# Enforce "none" for multipath components.
ENV{DM_MULTIPATH_DEVICE_PATH}=="1", ATTR{queue/scheduler}="none", GOTO="scheduler_end"
# Enforce "none" for loop devices
KERNEL=="loop[0-9]*", ATTR{queue/scheduler}="none", GOTO="scheduler_end"

# --- EDIT BELOW HERE after copying to /etc/udev/rules.d ---

# Uncomment these if you want to force virtual devices to use no scheduler
# KERNEL=="vd[a-z]*", ATTR{queue/scheduler}="none", GOTO="scheduler_end"
# KERNEL=="xvd[a-z]*", ATTR{queue/scheduler}="none", GOTO="scheduler_end"

# Leave virtual devices untouched
KERNEL=="vd[a-z]*", GOTO="scheduler_end"
KERNEL=="xvd[a-z]*", GOTO="scheduler_end"

# 1. BFQ scheduler for single-queue HDD
ATTR{queue/rotational}!="0", TEST!="%S%p/mq/1", ATTR{queue/scheduler}="bfq", GOTO="scheduler_end"

# 2. BFQ scheduler for every HDD, including "real" multiqueue
# ATTR{queue/rotational}!="0", ATTR{queue/scheduler}="bfq", GOTO="scheduler_end"

# 3. For "real" multiqueue devices, the kernel defaults to no IO scheduling
# Uncomment this (and select your scheduler) if you need an IO scheduler for them
# TEST=="%S%p/mq/1", ATTR{queue/scheduler}="kyber", GOTO="scheduler_end"

# 4. BFQ scheduler for every device (uncomment if you need ionice or blk-cgroup features)
# ATTR{queue/scheduler}="bfq", GOTO="scheduler_end"

# 5. mq-deadline is the kernel default for devices with just one hardware queue
# ATTR{queue/scheduler}="mq-deadline"

# --- EDIT ABOVE HERE after copying to /etc/udev/rules.d ---
LABEL="scheduler_end"
07070100000048000081A400000000000000000000000162C6946A00000394000000000000000000000000000000000000003F00000000suse-module-tools-16.0.20+2/udevrules/80-hotplug-cpu-mem.rules# do not edit this file, it will be overwritten on update

#
# Hotplug physical CPU
#
SUBSYSTEM=="cpu", ACTION=="add", TEST=="online", ATTR{online}=="0", ATTR{online}="1"

#
# Hotplug physical memory. Instances of tmpfs are remounted so their
# size are recalculated. This might be needed if some sizes were
# specified relative to the total amount of memory (boo#869603). For
# now make it simple and remount all tmpfs regardless of how their
# size are specified. It should be handled by the kernel as it has a
# lot of shortcomings anyways (tmpfs mounted by other processes, mount
# namespaces, ...)
#
SUBSYSTEM=="memory", ACTION=="add", PROGRAM=="/usr/bin/uname -m", RESULT!="s390x", ATTR{state}=="offline", \
  ATTR{state}="online", \
  RUN+="/bin/sh -c ' \
    while read src dst fs opts unused; do \
      case $$fs in \
      tmpfs)  mount -o remount \"$$dst\" ;; \
      esac \
    done </proc/self/mounts"
07070100000049000081A400000000000000000000000162C6946A00000163000000000000000000000000000000000000004000000000suse-module-tools-16.0.20+2/udevrules/99-wakeup-from-idle.rules# enable usb and standard AT Keyboards as wakeup sources for suspend-to-idle (S2I) fate#323814
ACTION=="add", ATTR{power/wakeup}=="disabled", SUBSYSTEM=="serio", ATTR{description}=="i8042 KBD port", ATTR{power/wakeup}="enabled"
ACTION=="add", ATTR{power/wakeup}=="disabled", SUBSYSTEM=="hid", ATTRS{bInterfaceProtocol}=="01", ATTR{power/wakeup}="enabled"
0707010000004A000081ED00000000000000000000000162C6946A0000076B000000000000000000000000000000000000002800000000suse-module-tools-16.0.20+2/unblacklist#! /bin/sh
# Copyright (c) 2021 SUSE LLC
# SPDX-License-Identifier: GPL-2.0-or-later

# Never unblacklist non-interactively
if ! tty -s <&0; then
    exit 0
fi

ME=$(basename "$0")
if [ $UID -ne 0 ]; then
    echo "$ME: you must be root to run this program" >&2
    exit 1
fi

if [ $# -ne 1 ]; then
    echo "Usage: $ME module" >&2
    exit 1
fi

MODULE=$1
if [ -z "$MODULE" ] || \
       [ ! -f /lib/modprobe.d/60-blacklist_fs-"$MODULE".conf -a \
	 ! -f /usr/lib/modprobe.d/60-blacklist_fs-"$MODULE".conf ]; then
    echo "$ME: Invalid or unknown module \"$MODULE\"" >&2
    exit 1
fi

CONF=/etc/modprobe.d/60-blacklist_fs-"$MODULE".conf
if [ -L "$CONF" ]; then
    if [ x"$(readlink -f "$CONF")" = x/dev/null ]; then
	# already linked to /dev/null
	exit 0
    else
	echo "$ME: $CONF is in unexpected state, exiting" >&2
	exit 1
    fi
elif [ -f "$CONF" ]; then
    if ! egrep -q "^[ 	]*blacklist[ 	]+$MODULE" "$CONF"; then
	# not blacklisted
	exit 0
    fi
    if ! egrep -q '^# __THIS FILE MAY BE MODIFIED__' "$CONF"; then
	echo "$ME: $CONF exists, cannot modify it" >&2
	exit 1
    fi
elif [ -e "$CONF" ]; then
    echo "$ME: $CONF is in unexpected state, exiting" >&2
    exit 1
fi

echo "$ME: loading $MODULE file system module" >&2
_a=
while [ -z "$_a" ]; do
    echo -n "$ME: Do you want to un-blacklist $MODULE permanently (<y>es/<n>o/n<e>ver)? " >&2
    read _a
    case $_a in
	y|yes)   _a=yes;;
	n|no)    _a=no;;
	e|never) _a=never;;
	*)       _a=;;
    esac
done
case $_a in
    no)
	echo "$ME: not un-blacklisting $MODULE" >&2
	exit 0
	;;
    never)
	echo "$ME: creating $CONF" >&2
	rm -f "$CONF"
	cat >$CONF <<EOF
# created by $0 (user wants to never unblacklist this module)
blacklist $MODULE
EOF
	exit 0
	;;
esac

if ln -sf /dev/null "$CONF"; then
    echo "$ME: $MODULE un-blacklisted by creating $CONF" >&2
    exit 0
else
    echo "$ME: Failed to create $CONF" >&2
    exit 1
fi
0707010000004B000081A400000000000000000000000162C6946A00002371000000000000000000000000000000000000002900000000suse-module-tools-16.0.20+2/weak-modules#! /bin/bash

# This script is only needed to uninstall old KMPs when updating
# SLE10 to SLE11+. weak-modules2 is the script what should be used by new
# packages

unset LANG LC_ALL LC_COLLATE

NM=
if command -v nm >/dev/null; then
    NM=nm
elif command -v eu-nm >/dev/null; then
    NM=eu-nm
else
    echo "ERROR: nm not found" >&2
    exit 1
fi

# Check if MODULE is compatible with kernel release KREL.
module_is_compatible() {
    declare module=$1 krel=$2 module_krel=$(krel_of_module "$module")

if [ ! -e $tmpdir/all-symvers-$krel-$module_krel ]; then
	# Symbols exported by the "new" kernel
	if [ ! -e $tmpdir/symvers-$krel ]; then
	    if [ -e /boot/symvers-$krel.gz ]; then
		zcat /boot/symvers-$krel.gz \
		| sed -r -ne 's:^0x0*([0-9a-f]+\t[0-9a-zA-Z_]+)\t.*:\1:p'
	    fi > $tmpdir/symvers-$krel
	fi

# Symbols that other add-on modules of the "old" kernel export
	# (and that this module may require)
	if [ ! -e $tmpdir/extra-symvers-$module_krel ]; then
	    if [ -e /lib/modules/$module_krel/updates ]; then
		find /lib/modules/$module_krel/updates -name '*.ko' \
		| xargs $NM -B \
		| sed -nre 's:^0*([0-9a-f]+) A __crc_(.*):\1 \2:p'
	    fi > $tmpdir/extra-symvers-$module_krel
	fi

sort -u $tmpdir/symvers-$krel $tmpdir/extra-symvers-$module_krel \
	> $tmpdir/all-symvers-$krel-$module_krel
    fi

# If the module does not have modversions enabled, $tmpdir/modvers
    # will be empty.
    /sbin/modprobe --dump-modversions "$module" \
    | sed -r -e 's:^0x0*([0-9a-f]+\t.*):\1:' \
    | sort -u \
    > $tmpdir/modvers

# Only include lines of the second file in the output that don't
    # match lines in the first file. (The default separator is
    # <space>, so we are matching the whole line.)
    join -j 1 -v 2 $tmpdir/all-symvers-$krel-$module_krel \
		   $tmpdir/modvers > $tmpdir/join

if [ ! -s $tmpdir/modvers ]; then
	echo "Warning: Module ${module##*/} from kernel $module_krel has no" \
	     "modversions, so it cannot be reused for kernel $krel" >&2
    elif [ -s $tmpdir/join ]; then
	[ -n "$verbose" ] &&
	echo "Module ${module##*/} from kernel $module_krel is not compatible" \
	     "with kernel $krel in symbols:" $(sed -e 's:.* ::' $tmpdir/join)
    elif [ "$krel" != "$module_krel" ]; then
	[ -n "$verbose" ] &&
	echo "Module ${module##*/} from kernel $module_krel is compatible" \
	     "with kernel $krel"
	return 0
    fi
    return 1
}

# Compute the kernel release of a module.
krel_of_module() {
    declare module=$1
    set -- $(/sbin/modinfo -F vermagic "$module")
    echo "$1"
}

# Read a list of modules from standard input, convert the filenames into
# absolute names, and compute the kernel release of each module.
read_modules_list() {
    local saved_IFS=$IFS
    IFS=$'\n'
    modules=($(cat))
    IFS=$saved_IFS

for ((n = 0; n < ${#modules[@]}; n++)); do
	if [ ${modules[n]:0:1} != / ]; then
	    modules[n]=$PWD/${modules[n]}
	fi
	if [ -f "${modules[n]}" ]; then
	    module_krels[n]=$(krel_of_module "${modules[n]}")
	else
	    # Try to extract the kernel release from the path
	    set -- "${modules[n]#/lib/modules/}"
	    module_krels[n]=${1%%/*}
	fi
    done
}

doit() {
    [ -n "$verbose" ] && echo "$@"
    [ -n "$dry_run" ] || "$@"
}

usage() {
    cat <<'EOF'
Usage: ${0##*/} [options] {--add-modules|--remove-modules}
       ${0##*/} [options] {--add-kernel|--remove-kernel} {kernel-release}

--add-modules
	Add a list of modules read from standard input. Create
	symlinks in compatible kernel's weak-updates/ directory.
	The list of modules is read from standard input.

--remove-modules
	Remove compatibility symlinks from weak-updates/ directories
	for a list of modules.  The list of modules is read from
	standard input.

--add-kernel
	Add compatibility symlinks for all compatible modules to the
	specified or running kernel.

--remove-kernel
	Remove all compatibility symlinks for the specified or current
	kernel.

--verbose
	Print the commands executed.

-dry-run
	Do not create/remove any files.
EOF
    exit $1
}

[ -e /etc/sysconfig/kernel ] && source /etc/sysconfig/kernel

unset ${!changed_modules_*} ${!changed_initrd_*}

module_has_changed() {
    declare module=$1 krel=$2

module=${module%.ko}
    module=${module##*/}

eval "changed_modules_${krel//[^a-zA-Z0-9]/_}=$krel"
    case " $INITRD_MODULES " in
    *" $module "*)
	eval "changed_initrd_${krel//[^a-zA-Z0-9]/_}=$krel"
	;;
    esac
}

options=`getopt -o h --long help,add-modules,remove-modules \
		     --long add-kernel,remove-kernel,dry-run,verbose -- "$@"`

[ $? -eq 0 ] || usage 1

eval set -- "$options"

while :; do
    case "$1" in
    --add-modules)
	add_modules=1
	;;
    --remove-modules)
	remove_modules=1
	;;
    --add-kernel)
	add_kernel=1
	;;
    --remove-kernel)
	remove_kernel=1
	;;
    --dry-run)
	dry_run=1
	;;
    --verbose)
	verbose=1
	;;
    -h|--help)
	usage 0
	;;
    --)
	shift
	break
	;;
    esac
    shift
done

if [ "$add_modules$remove_modules$add_kernel$remove_kernel" != 1 ]; then
    usage 1
fi
if [ -n "$add_kernel" -o -n "$remove_kernel" ]; then
    [ $# -gt 1 ] && usage 1
else
    [ $# -ne 0 ] && usage 1
fi

tmpdir=$(mktemp -td ${0##*/}.XXXXXX)
trap "rm -rf $tmpdir" EXIT

if [ -n "$add_modules" ]; then
    read_modules_list || exit 1
    if [ ${#modules[@]} -gt 0 ]; then
	for krel in $(ls /lib/modules/); do
	    [ -e /boot/symvers-$krel.gz ] || continue
	    for ((n = 0; n < ${#modules[@]}; n++)); do
		module=${modules[n]}
		module_krel=${module_krels[n]}
		case "$module" in
		/lib/modules/$krel/*)
		    continue ;;
		esac
		subpath=${module#/lib/modules/$module_krel/updates}
		weak_module=/lib/modules/$krel/weak-updates/${subpath#/}
		if [ -r "$weak_module" ]; then
		    weak_krel=$(krel_of_module "$weak_module")
		    if [ "$weak_krel" != "$module_krel" ] &&
		       [ "$(printf "%s\n" "$weak_krel" "$module_krel" \
			    | /usr/lib/rpm/rpmsort | head -n 1)" = \
			 "$module_krel" ]; then
			# Keep modules from more recent kernels.
			[ -n "$verbose" ] && echo \
"Keeping module ${module##*/} from kernel $weak_krel for kernel $krel"
			continue
		    fi
		fi
		if module_is_compatible $module $krel; then
		    doit mkdir -p $(dirname $weak_module)
		    doit ln -sf $module $weak_module
		    module_has_changed $module $krel
		fi
	    done
	done
    fi
elif [ -n "$remove_modules" ]; then
    read_modules_list || exit 1
    if [ ${#modules[@]} -gt 0 ]; then
	krels=($(ls /lib/modules/ | /usr/lib/rpm/rpmsort -r))
	for krel in "${krels[@]}"; do
	    [ -e /boot/symvers-$krel.gz ] || continue
	    for ((n = 0; n < ${#modules[@]}; n++)); do
		module=${modules[n]}
		[ -e "$module" ] && continue
		module_krel=${module_krels[n]}
		subpath=${module#/lib/modules/$module_krel/updates}
		weak_module=/lib/modules/$krel/weak-updates/${subpath#/}
		if [ "$(readlink "$weak_module")" = "$module" ]; then
		    [ -n "$verbose" ] && echo \
"Removing compatible module ${subpath#/} from kernel $krel"
		    doit rm -f "$weak_module"
		    for krel2 in "${krels[@]}"; do
			[ -e /boot/symvers-$krel2.gz ] || continue
			module=/lib/modules/$krel2/updates/${subpath#/}
			[ -e "$module" ] || continue
			if module_is_compatible "$module" "$krel2"; then
			    [ -n "$verbose" ] && echo \
"Adding compatible module ${module##*/} from kernel $krel2 instead"
			    doit ln -s "$module" "$weak_module"
			    break
			fi
		    done
		    doit rmdir --parents --ignore-fail-on-non-empty \
			       "$(dirname "$weak_module")"
		    module_has_changed $module $krel
		fi
	    done
	done
    fi
elif [ -n "$add_kernel" ]; then
    add_krel=${1:-$(uname -r)}
    if [ ! -e /boot/symvers-$add_krel.gz ]; then
	echo "Symvers dump file /boot/symvers-$add_krel.gz" \
	     "not found" >&2
	exit 1
    fi
    for krel in $(ls /lib/modules/ | /usr/lib/rpm/rpmsort -r); do
	[ "$add_krel" = "$krel" ] && continue
	[ -d /lib/modules/$krel/updates ] || continue
	for module in $(find /lib/modules/$krel/updates -name '*.ko'); do
	    subpath=${module#/lib/modules/$krel/updates}
	    weak_module=/lib/modules/$add_krel/weak-updates/${subpath#/}
	    [ -e "$weak_module" ] && continue
	    if module_is_compatible $module $add_krel; then
		doit mkdir -p $(dirname $weak_module)
		doit ln -sf $module $weak_module
	    fi
	done
    done
elif [ -n "$remove_kernel" ]; then
    remove_krel=${1:-$(uname -r)}
    weak_modules=/lib/modules/$remove_krel/weak-updates
    doit rm -rf "$weak_modules"
fi

for krel in ${!changed_modules_*}; do
    krel=${!krel}
    [ -e /boot/System.map-$krel ] || continue
    /sbin/depmod -ae -F /boot/System.map-$krel $krel
done

for krel in ${!changed_initrd_*}; do
    krel=${!krel}
    [ -e /boot/System.map-$krel ] || continue

image=
    for x in vmlinuz image vmlinux linux bzImage uImage Image; do
	if [ -f /boot/$x-$krel ]; then
	    image=$x
	    break
	fi
    done
    if [ -n "$image" ]; then
	if [ -x /sbin/mkinitrd ]; then
	    /sbin/mkinitrd -k /boot/$image-$krel -i /boot/initrd-$krel
	else
	    echo "Please run mkinitrd as soon as your system is complete." >&2
	fi
    fi
done

# vim:shiftwidth=4 softtabstop=4
0707010000004C000081A400000000000000000000000162C6946A00006022000000000000000000000000000000000000002A00000000suse-module-tools-16.0.20+2/weak-modules2#! /bin/bash

##############################################################################
# How it works:
# * Kernels install modules below /lib/modules/$krel/kernel/.
# * KMPs install modules below /lib/modules/$krel/updates/ or .../extra/.
# * Symbolic links to modules of compatible KMPs are created under
#   /lib/modules/$krel/weak-updates/{updates,extra}/... (the original path
#   below /lib/modules/$other_krel is used).
# * Depmod searches the directories in this order: updates/, extra/,
#   weak-updates/, kernel/ (see /etd/depmod.conf or
#   /etc/depmod.d/00-system.conf for details).
# * Compatibility of a kernel with a KMP is defined as: The KMP is built
#   for the same flavor as the kernel and after adding the KMP modules to
#   the kernel, depmod -e -E Module.symvers reports no errors about
#   missing symbols or different symbol checksums. See the
#   has_unresolved_symbols() function for details.
#
# * At KMP install time (function add_kmp()), we create symbolic links
#   for all kernels that this KMP is compatible with. We skip kernels that
#   already contain symbolic links to a newer KMP of the same name,
#   contain the KMP itself or another version in updates/ or extra/ or
#   have overlapping module names with other KMPs in the respective
#   kernel (this should not happen).
# * At kernel install time (functions add_kernel()), we create symbolic
#   links for each compatible KMP, unless the KMP or a different one with
#   overlapping module names is present in updates/ or extra/ (KMP build
#   against $krel can be installed before a kernel with that version).
#   When multiple KMPs of the same name are compatbile, we chose the one
#   with the highest version number. This is repeated when subsequent
#   subpackages (main or -extra) of that kernel are installed.
# * At KMP removal time (function remove_kmp()), the modules and their
#   symlinks are removed and, where possible, replaced by symlinks to the
#   newest of the remaining compatible version of that KMP.
# * [NOT IMPLEMENTED] When a kernel subpackage is removed, symlinks to
#   KMPs that become incompatible are removed as well. This is not
#   implemented, because removing the main subpackage and only keeping
#   the -base package AND having KMPs installed is not an expected
#   scenario, and implementing this would only slow down kernel updates.
# * When the kernel is removed (function remove_kernel()), it's
#   weak-updates directory is also removed.
#
# naming conventions used in this script:
# $kmp: name-version-release of a kmp, e.g kqemu-kmp-default-1.3.0pre11_2.6.25.16_0.1-7.1
# $kmpshort: name of a kmp, e.g kqemu-kmp-default
# $basename: portion of $kmp up to the "-kmp-" part, e.g kqemu
# $flavor: flavor of a kmp or kernel, e.g default
# $krel: kernel version, as in /lib/modules/$krel
# $module: full path to a module below updates/
# $symlink: full path to a module symlink below weak-updates/
#
# files in $tmpdir:
# krel-$kmp: kernel version for which $kmp was built
# modules-$kmp: list of modules in $kmp (full paths)
# basenames-$kmp: list of basenames of modules in $kmp
# kmps: list of kmps, newest first
#

: ${DRACUT:=/usr/bin/dracut}
find_lsinitrd() {
    local lsi
    LSINITRD=
    for lsi in /usr/lib/module-init-tools/lsinitrd-quick /usr/bin/lsinitrd; do
	if [[ -x $lsi ]]; then
	    LSINITRD=$lsi
	    break
	fi
    done
    if [[ ! "$LSINITRD" ]]; then
	echo "$0: could not find lsinitrd" >&2
	exit 1
    fi
    dlog "LSINITRD=$LSINITRD"
}

find_depmod() {
    local _d

find_usrmerge_boot() {
    local filename=$1
    local kver=$2
    local ext=${3:+."$3"}
    local f

for f in "/usr/lib/modules/$kver/$filename$ext" "/boot/$filename-$kver$ext"
    do
	if [ -e "$f" ]; then
	    echo "$f"
	    return
	fi
    done
    log "WARNING: find_usrmerge_boot: $filename$ext not found for kernel $kver"
}

log() {
    [ $opt_verbose -gt 0 ] && echo "$@" >&2
    return 0
}

dlog() {
    [ $opt_verbose -gt 1 ] && echo "$@" >&2
    return 0
}

doit() {
    if [ -n "$doit" ]; then
	# override
	"$@"
	return
    fi
    log "$@"
    if [ -z "$opt_dry_run" ]; then
	"$@"
    else
	:
    fi
}

strip_mod_extensions() {
    sed -rn '/^_kernel_$/p;s/\.ko(\.[gx]z|\.zst)?$//p'
}

# Name of the symlink that makes a module available to a given kernel
symlink_to_module() {
    local module=$1 krel=$2

echo /lib/modules/$krel/weak-updates/${module#/lib/modules/*/}
}

# Is a kmp already present in or linked to from this kernel?
__kmp_is_present() {
    local kmp=$1 krel=$2

if [ $krel = "$(cat $tmpdir/krel-$kmp)" ]; then
        return 0
    fi
    local module symlink
    while read module; do
	symlink=$(symlink_to_module $module $krel)
	[ $module -ef $symlink -o $module = "$(readlink $symlink)" ] || return 1
    done < $tmpdir/modules-$kmp

return 0
}

kmp_is_present() {
    __kmp_is_present "$1" "$2"
    local res=$?
    dlog "kmp_is_present: kmp=$1 krel=$2 => $res"
    return $res
}

# Add the modules of a kmp to /lib/modules/$krel
add_kmp_modules() {
    local kmp=$1 krel=$2 basedir=$3

[ -n "$kmp" ] || return 0

local module symlink
    while read module; do
	symlink=$(symlink_to_module $module $krel)
	doit mkdir -p ${opt_debug:+-v} $basedir${symlink%/*} || exit 1
	doit ln -sf ${opt_debug:+-v} $module $basedir$symlink || exit 1
	dlog "add_kmp_modules: added $module to $krel"
    done < $tmpdir/modules-$kmp
}

# Remove the modules of a kmp from /lib/modules/$krel
remove_kmp_modules() {
    local kmp=$1 krel=$2 basedir=$3

[ -n "$kmp" ] || return 0

local module symlink
    while read module; do
	symlink=$(symlink_to_module $module $krel)
	doit rm -f ${opt_debug:+-v} $basedir$symlink
	dlog "remove_kmp_modules: removed $module from $krel"
    done < $tmpdir/modules-$kmp
}

# Create a temporary working copy of /lib/modules/$1
create_temporary_modules_dir() {
    local modules_dir=/lib/modules/$1 basedir=$2
    local opt_v=${opt_debug:+-v}

mkdir -p $opt_v $basedir$modules_dir/weak-updates
    ln -s $opt_v $modules_dir/kernel $basedir$modules_dir/kernel

eval "$(find $modules_dir -path "$modules_dir/modules.*" -prune \
		-o -path "$modules_dir/kernel" -prune \
		-o -type d -printf "mkdir -p $opt_v $basedir%p\n" \
		-o -printf "ln -s $opt_v %p $basedir%p\n"
           )"
}

# Check for unresolved symbols
has_unresolved_symbols() {
    local krel=$1 basedir=$2 output status args sym_errors _f

if [ ! -e "$tmpdir/symvers-$krel" ]; then
	_f=$(find_usrmerge_boot symvers "$krel" gz)
	if [ -n "$_f" ]; then
	    dlog "has_unresolved_symbols: found $_f"
	    zcat "$_f" >"$tmpdir/symvers-$krel"
	fi
    fi
    if [ -e $tmpdir/symvers-$krel ]; then
	args=(-E $tmpdir/symvers-$krel)
    else
	echo "WARNING: symvers.gz not found for $krel, symbol resolution will be unreliable" >&2
	_f=$(find_usrmerge_boot System.map "$krel")
	if [ -n "$_f" ]; then
	    args=(-F "$_f")
	else
	    echo "WARNING: System.map not found for $krel, symbol resolution may fail" >&2
	fi
    fi
    output="$("$DEPMOD" -b "$basedir" -ae "${args[@]}" $krel 2>&1)"
    status=$?
    if [ $status -ne 0 ]; then
	echo "$output" >&2
	echo "depmod exited with error $status" >&2
	return 0
    fi
    sym_errors=$(echo "$output" | \
	grep -E ' (needs unknown|disagrees about version of) symbol ')
    if [ -n "$sym_errors" ]; then
	[ -z "$opt_debug" ] || echo "$sym_errors" >&2
	return 0
    fi
    dlog "has_unresolved_symbols: no errors found for $krel"
    return 1
}

# KMPs can only be added if none of the module basenames overlap
basenames_are_unique() {
    local kmp=$1 krel=$2 basedir=$3 dir

for dir in $basedir/lib/modules/$krel/{weak-updates,updates,extra}/; do
        if [ ! -d "$dir" ]; then
            continue
        fi
	local overlap="$(comm -1 -2 $tmpdir/basenames-$kmp \
               <(find "$dir" -not -type d -printf '%f\n' | sort -u))"
        if [ -n "$overlap" ]; then
	    dlog "basenames_are_unique: found name overlap for $kmp in $dir: " $overlap
            return 1
        fi
    done
    dlog "basenames_are_unique: $kmp is unique in $basedir"
    return 0
}

# Can a kmp be replaced by a different version of the same kmp in a kernel?
# Set the old kmp to "" when no kmp is to be removed.
__can_replace_kmp() {
    local old_kmp=$1 new_kmp=$2 krel=$3

local basedir=$tmpdir/$krel
    local weak_updates=/lib/modules/$krel/weak-updates/

[ -d "$basedir" ] || \
	create_temporary_modules_dir "$krel" "$basedir"

# force doit() to execute the commands (in $tmpdir)
    doit=1 remove_kmp_modules "$old_kmp" "$krel" "$basedir"
    if ! basenames_are_unique "$new_kmp" "$krel" "$basedir"; then
	doit=1 add_kmp_modules "$old_kmp" "$krel" "$basedir"
	return 1
    fi
    doit=1 add_kmp_modules "$new_kmp" "$krel" "$basedir"
    if has_unresolved_symbols "$krel" "$basedir"; then
	doit=1 remove_kmp_modules "$new_kmp" "$krel" "$basedir"
	doit=1 add_kmp_modules "$old_kmp" "$krel" "$basedir"
	return 1
    fi
    return 0
}

can_replace_kmp() {
    __can_replace_kmp "$1" "$2" "$3"
    local res=$?
    dlog "can_replace_kmp: old=$1 new=$2 krel=$3 => $res"
    return $res
}

# Figure out which modules a kmp contains
check_kmp() {
    local kmp=$1

# Make sure all modules are for the same kernel
    set -- $(sed -re 's:^/lib/modules/([^/]+)/.*:\1:' \
		 $tmpdir/modules-$kmp \
	     | sort -u)
    if [ $# -ne 1 ]; then
	echo "Error: package $kmp seems to contain modules for multiple" \
	     "kernel versions" >&2
	return 1
    fi
    echo $1 > $tmpdir/krel-$kmp
    dlog "check_kmp: $kmp contains modules for $1"

# Make sure none of the modules are in kernel/ or weak-updates/
    if grep -qE -e '^/lib/modules/[^/]+/(kernel|weak-updates)/' \
	    $tmpdir/modules-$kmp; then
	echo "Error: package $kmp must not install modules into " \
	     "kernel/ or weak-updates/" >&2
	return 1
    fi
    sed -e 's:.*/::' $tmpdir/modules-$kmp \
	| sort -u > $tmpdir/basenames-$kmp
    dlog "check_kmp: $kmp contains: " $(cat $tmpdir/basenames-$kmp)
}

# Figure out which kmps there are, and which modules they contain
# set basename to '*' to find all kmps of a given flavor
find_kmps() {
    local basename=$1 flavor=$2
    local kmp

for kmp in $(rpm -qa --qf '%{n}-%{v}-%{r}\n' --nodigest --nosignature "$basename-kmp-$flavor"); do
	dlog "find_kmps: looking at $kmp"
	if rpm -q --qf '[%{providename}\n]' --nodigest --nosignature "$kmp" | \
	    grep -q '^kmp_in_kernel$'; then
	    # KMP built directly from the kernel spec file (fate#319339)
	    continue
	fi
	rpm -ql --nodigest --nosignature "$kmp" \
	    | sed -nr 's:^(/usr)?(/lib/modules/[^/]+/.+\.ko)(\.[gx]z|\.zst)?$:\2\3:p' \
	    > $tmpdir/modules-$kmp
	if [ $? != 0 ]; then
	    echo "WARNING: $kmp does not contain any kernel modules" >&2
	    rm -f $tmpdir/modules-$kmp
	    continue
	fi

check_kmp $kmp || return 1
    done

printf "%s\n" $tmpdir/basenames-* \
    | sed -re "s:$tmpdir/basenames-::" \
    | /usr/lib/rpm/rpmsort -r \
    > $tmpdir/kmps

dlog "find_kmps: kmps found: " $(cat $tmpdir/kmps)
}

__previous_version_of_kmp() {
    local new_kmp=$1 krel=$2
    local module symlink old_kmp
    
    while read module; do
	symlink=$(symlink_to_module $module $krel)
	[ -e "$symlink" ] || continue
	[ -L "$symlink" ] || return

old_kmp=$(grep -l "$(readlink "$symlink")" $tmpdir/modules-* | sed 's:.*/modules-::' ) || return
	# The package %NAME must be the same
	[ "${old_kmp%-*-*}" == "${new_kmp%-*-*}" ] || return
	# The other kmp must be older
	while read kmp; do
	    [ "$kmp" == "$old_kmp" ] && return
	    [ "$kmp" == "$new_kmp" ] && break
	done <$tmpdir/kmps
    done < $tmpdir/modules-$new_kmp
    echo "$old_kmp"
}

previous_version_of_kmp() {
    local old="$(__previous_version_of_kmp "$1" "$2")"
    local res=$?
    dlog "previous_version_of_kmp: kmp=$1 krel=$2 => $old"
    echo "$old"
    return $res
}

get_initrd_basenames() {
    $LSINITRD /boot/initrd-$1 | \
	sed -rn 's:.*\<lib/modules/.*/::p' | \
	strip_mod_extensions

INITRD_MODULES=
    . /etc/sysconfig/kernel &>/dev/null
    printf '%s\n' $INITRD_MODULES
}

# test if rebuilding initrd is needed for $krel.
# stdin - list of changed modules ("_kernel_" for the whole kernel)
needs_initrd() {
    local krel=$1

# Don't generate an initrd for kdump here. It's done automatically with mkdumprd when
    # /etc/init.d/boot.kdump is called to load the kdump kernel. See mkdumprd(8) why
    # it is done this way.
    if [[ "$krel" == *kdump* ]] ; then
        return 1
    fi

if ! [ -f /etc/fstab -a ! -e /.buildenv -a -x "$DRACUT" ] ; then
	echo "Please run \"$DRACUT -f /boot/initrd-$krel $krel\" as soon as your system is complete." >&2
	return 1
    fi
    # KMPs can force initrd rebuild with %kernel_module_package -b that sets
    # this variable
    if test -n "$KMP_NEEDS_MKINITRD" && \
		! test "$KMP_NEEDS_MKINITRD" -eq 0 2>/dev/null; then
	dlog "needs_initrd: yes, KMP_NEEDS_MKINITRD=$KMP_NEEDS_MKINITRD"
	return 0
    fi

local changed_basenames=($(strip_mod_extensions | sort -u))
    dlog "needs_initrd: changed_basenames: " $changed_basenames

if [ "$changed_basenames" = "_kernel_" ]; then
	dlog "needs_initrd: yes, kernel package"
	return 0
    fi
    if [ ! -e /boot/initrd-$krel ]; then
	dlog "needs_initrd: yes, initrd doesn't exist yet"
	return 0
    fi
    local initrd_basenames=($(get_initrd_basenames "$krel" | sort -u))
    dlog "needs_initrd: initrd_basenames: " $initrd_basenames
    local i=($(join <(printf '%s\n' "${changed_basenames[@]}") \
	            <(printf '%s\n' "${initrd_basenames[@]}") ))
    log "changed initrd modules for kernel $krel: ${i[@]-none}"
    if [ ${#i[@]} -gt 0 ]; then
	dlog "needs_initrd: yes, modules changed"
	return 0
    fi
    dlog "needs_initrd: no"
    return 1
}

# run depmod and rebuild initrd for kernel version $krel
# stdin - list of changed modules ("_kernel_" for a whole kernel)
run_depmod_build_initrd() {
    local krel=$1
    local status=0
    local system_map

if [ -d /lib/modules/$krel ]; then
	system_map=$(find_usrmerge_boot System.map "$krel")
	if [ -n "$system_map" ]; then
	   doit "$DEPMOD" -F "$system_map" -ae "$krel" || return 1
	fi
    fi
    if needs_initrd $krel; then
	local image x
	for x in vmlinuz image vmlinux linux bzImage uImage Image zImage; do
	    image=$(find_usrmerge_boot "$x" "$krel")
	    [ -z "$image" ] || break
	done
	if [ -n "$image" ]; then
	    if test -n "$INITRD_IN_POSTTRANS"; then
		mkdir -p /run/regenerate-initrd
		doit touch /run/regenerate-initrd/$image-$krel
	    else
		doit "$DRACUT" -f /boot/initrd-$krel $krel
		status=$?
	    fi
	else
	    echo "WARNING: kernel image for $krel not found!" >&2
	fi
    fi
    return $status
}

walk_kmps() {
    local krel=$1
    local kmps=( $(cat $tmpdir/kmps) )

while :; do
	[ ${#kmps[@]} -gt 0 ] || break
	local added='' skipped='' n kmp
	for ((n=0; n<${#kmps[@]}; n++)); do
	    kmp=${kmps[n]}
	    [ -n "$kmp" ] || continue

dlog "walk_kmps: checking $kmp for $krel"
	    if kmp_is_present $kmp $krel; then
		log "Package $kmp does not need to be added to kernel $krel"
		kmps[n]=''
		continue
	    fi
	    local old_kmp=$(previous_version_of_kmp $kmp $krel)
	    if can_replace_kmp "$old_kmp" $kmp $krel; then
		remove_kmp_modules "$old_kmp" "$krel"
		add_kmp_modules "$kmp" "$krel"
		if [ -z "$old_kmp" ]; then
		    log "Package $kmp added to kernel $krel"
		else
		    log "Package $old_kmp replaced by package $kmp in kernel $krel"
		fi
		added=1
		kmps[n]=''
		continue
	    fi
	    dlog "walk_kmps: skipped $kmp"
	    skipped=1
	done
	[ -n "$added" -a -n "$skipped" ] || break
    done
}

kernel_changed() {
    local krel=$1 flavor=${1##*-}
    local system_map=$(find_usrmerge_boot System.map "$krel")

if [ -z "$system_map" ]; then
	# this kernel does not exist anymore
	dlog "kernel_changed: kernel removed"
	return 0
    fi
    if [ ! -d /lib/modules/$krel ]; then
	# a kernel without modules - rebuild initrd nevertheless (to mount the
	# root fs, etc).
	dlog "kernel_changed: kernel without modules"
    elif find_kmps '*' $flavor; then
	walk_kmps "$krel"
    fi

echo "_kernel_" | run_depmod_build_initrd "$krel"
}

add_kernel() {
    local krel=$1

kernel_changed $krel
}

remove_kernel() {
    local krel=$1

local dir=/lib/modules/$krel
    if [ -d $dir/weak-updates ]; then
	rm -rf $dir/weak-updates
    fi
    # If there are no KMPs left, remove the empty directory
    rmdir $dir 2>/dev/null
}

add_kernel_modules() {
    local krel=$1
    cat >/dev/null

kernel_changed $krel
}

remove_kernel_modules() {
    local krel=$1
    cat >/dev/null

# FIXME: remove KMP symlinks that no longer work
    kernel_changed $krel
}

add_kmp() {
    local kmp=$1 kmpshort=${1%-*-*}
    local basename=${kmpshort%-kmp-*} flavor=${kmpshort##*-}
    local system_map

# Find the kmp to be added as well as any previous versions
    find_kmps "$basename" "$flavor" || return 1

local dir krel status
    for dir in /lib/modules/*; do
	krel=${dir#/lib/modules/}
        case "$krel" in
        *-$flavor)
            ;;
        *)
            continue
        esac
	dlog "add_kmp: processing $kmp for $krel"
	[ -d $dir ] || continue
	system_map=$(find_usrmerge_boot System.map "$krel")
	[ -n "$system_map" ] || continue
	if opt_debug=1 has_unresolved_symbols "$krel" "/"; then
	    echo "Warning: /lib/modules/$krel is inconsistent" >&2
	    echo "Warning: weak-updates symlinks might not be created" >&2
	fi

if kmp_is_present $kmp $krel; then
	    log "Package $kmp does not need to be added to kernel $krel"
	    run_depmod_build_initrd "$krel" <$tmpdir/basenames-$kmp || \
		status=1
	    continue
	fi
	local old_kmp=$(previous_version_of_kmp $kmp $krel)
	if can_replace_kmp "$old_kmp" $kmp $krel; then
	    remove_kmp_modules "$old_kmp" "$krel"
	    add_kmp_modules "$kmp" "$krel"
	    if [ -z "$old_kmp" ]; then
		log "Package $kmp added to kernel $krel"
		run_depmod_build_initrd "$krel" <$tmpdir/basenames-$kmp || \
		    status=1
	    else
		log "Package $old_kmp replaced by package $kmp in kernel $krel"
		cat $tmpdir/basenames-{$old_kmp,$kmp} \
		| run_depmod_build_initrd "$krel" || status=1
	    fi
	else
	    dlog "add_kmp: skipped $kmp"
	fi
    done
    dlog "add_kmp: status=$status"
    return $status
}

remove_kmp() {
    local kmp=$1 kmpshort=${1%-*-*}
    local basename=${kmpshort%-kmp-*} flavor=${kmpshort##*-}

# Find any previous versions of the same kmp
    find_kmps "$basename" "$flavor" || return 1

# Read the list of module names from standard input
    # (This kmp may already have been removed!)
    sed 's:^/usr::' > $tmpdir/modules-$kmp
    check_kmp "$kmp" || return 1

local dir krel status system_map
    for dir in /lib/modules/*; do
	krel=${dir#/lib/modules/}
        case "$krel" in
        *-$flavor)
            ;;
        *)
            continue
        esac
	[ -d $dir ] || continue
	system_map=$(find_usrmerge_boot System.map "$krel")
	[ -n "$system_map" ] || continue
	dlog "remove_kmp: processing $kmp for $krel"
	if kmp_is_present $kmp $krel; then
	    local other_found=0 inconsistent=0

if opt_debug=1 has_unresolved_symbols "$krel" "/" \
			>$tmpdir/unresolved-"$krel" 2>&1; then
		inconsistent=1
	    fi

if [ $krel != "$(cat $tmpdir/krel-$kmp)" ]; then
                remove_kmp_modules "$kmp" "$krel"
            fi

local other_kmp
	    while read other_kmp; do
		[ "$kmp" != "$other_kmp" ] || continue

other_found=1
		dlog "remove_kmp: checking other KMP $other_kmp"
		if can_replace_kmp "" "$other_kmp" "$krel"; then
		    add_kmp_modules "$other_kmp" "$krel"
		    break
		fi
	    done < $tmpdir/kmps
	    if [ -n "$other_kmp" ]; then
		log "Package $kmp replaced by package $other_kmp in kernel $krel"
		cat $tmpdir/basenames-{$kmp,$other_kmp} \
		| run_depmod_build_initrd "$krel" || status=1
	    else
		log "Package $kmp removed from kernel $krel"
		if [ $other_found -eq 1 ]; then
		    log "Weak-updates symlinks to no other $kmpshort package could be created"
		    if [ $inconsistent -eq 1 ]; then
			echo "Warning: /lib/modules/$krel was inconsistent before removal of $kmp" >&2
			[ -s $tmpdir/unresolved-"$krel" ] && \
			    cat $tmpdir/unresolved-"$krel"
		    fi
		fi
		run_depmod_build_initrd "$krel" <$tmpdir/basenames-$kmp || \
		    status=1
	    fi
	    rm -f $tmpdir/unresolved-"$krel"
	fi
    done
    dlog "remove_kmp: status=$status"
    return $status
}

help() {
cat <<EOF
${0##*/} --add-kmp kmp-name-version-release
	To be called in %post of kernel module packages. Creates
	symlinks in compatible kernel's weak-updates/ directory and rebuilds
	the initrd if needed.

${0##*/} --remove-kmp kmp-name < module-list
	To be called in %postun of kernel module packages. Removes
	weak-updates/ symlinks for this KMP. As the KMP doesn't exist in
	the RPM database at this point, the list of modules has to be
	passed on standard input. Rebuilds the initrd if needed.

${0##*/} --add-kernel kernel-release
	To be called in %post of the kernel base package. Adds
	compatibility symlinks for all compatible KMPs and rebuilds the
	initrd if needed.

${0##*/} --remove-kernel kernel-release
	To be called in %postun of the kernel base package. Removes all
	compatibility symlinks.

${0##*/} --add-kernel-modules kernel-release < module-list
        To be called in %post of kernel subpackages that only contain
        modules (i.e. not kernel-*-base). Adds newly available
        compatibity symlinks and rebuilds the initrd if needed.

${0##*/} --remove-kernel-modules kernel-release < module-list
        To be called in %postun of kernel subpackages that only contain
        modules (i.e. not kernel-*-base). Removes no longer working
        compatibity symlinks and rebuilds the initrd if needed.

${0##*/} --verbose ...
	Print commands as they are executed and other information.

${0##*/} --dry-run ...
	Do not perform any changes to the system. Useful together with
	--verbose for debugging.
EOF
}

usage() {
    echo "Usage:"
    help | sed -n 's/^[^[:blank:]]/    &/p'
}

##############################################################################

save_argv=("$@")
options=`getopt -o vh --long add-kernel,remove-kernel,add-kmp,remove-kmp \
                      --long add-kernel-modules,remove-kernel-modules \
		      --long usage,help,verbose,dry-run,debug,logfile: -- "$@"`
if [ $? -ne 0 ]; then
    usage >&2
    exit 1
fi
eval set -- "$options"
mode=
opt_logfile=$WM2_LOGFILE
case $WM2_VERBOSE in
    [0-3])
	opt_verbose=$WM2_VERBOSE
	;;
    *)
	opt_verbose=0
	;;
esac
case $WM2_DEBUG in
    1)
	opt_debug=1
	;;
    *)
	opt_debug=
	;;
esac
while :; do
    case "$1" in
    --add-kernel | --remove-kernel | --add-kernel-modules | \
    --remove-kernel-modules | --add-kmp | --remove-kmp )
	mode="$1"
	;;
    -v | --verbose)
	opt_verbose=$((opt_verbose + 1))
	;;
    --dry-run)
	opt_dry_run=1
	;;
    --debug)
	opt_debug=1
	;;
    --logfile)
	shift
	opt_logfile=$1
	;;
    --usage)
	usage
	exit 0
	;;
    -h | --help)
	help
	exit 0
	;;
    --)
	shift
	break
	;;
    esac
    shift
done

err=
case "$mode" in
"")
    err="Please specify one of the --add-* or --remove-* options"
    ;;
--add-kernel | --remove-kernel)
    if [ $# -gt 1 ]; then
        err="Too many arguments to $mode"
    fi
    [ $# -eq 1 ] || set -- $(uname -r)
    ;;
*)
    if [ $# -ne 1 ]; then
        err="Option $mode requires exactly one argument"
    fi
    ;;
esac
if [ -n "$err" ]; then
    echo "ERROR: $err" >&2
    usage >&2
    exit 1
fi

if [ -n "$opt_logfile" ]; then
    [ "${opt_logfile#/}" != "$opt_logfile" ] || opt_logfile="/var/log/$opt_logfile"
    echo "${0##/*}: appending output to $opt_logfile" >&2
    exec 2>>"$opt_logfile"
fi
if [ $opt_verbose -gt 2 ]; then
    set -x
    # tracing will print everything, no need to print in log()
    opt_verbose=$((opt_verbose - 3))
fi

#unset LANG LC_ALL LC_COLLATE
find_depmod
find_lsinitrd

tmpdir=$(mktemp -d /var/tmp/${0##*/}.XXXXXX)
trap "rm -rf $tmpdir" EXIT

shopt -s nullglob

case $mode in
--add-kernel)
    add_kernel "$1"
    ;;
--remove-kernel)
    remove_kernel "$1"
    ;;
--add-kernel-modules)
    add_kernel_modules "$1"
    ;;
--remove-kernel-modules)
    remove_kernel_modules "$1"
    ;;
--add-kmp)
    add_kmp "$1"
    ;;
--remove-kmp)
    remove_kmp "$1"
esac

# vim:shiftwidth=4 softtabstop=4
07070100000000000000000000000000000000000000010000000000000000000000000000000000000000000000000000000B00000000TRAILER!!!264 blocks

Places

File _service:obs_scm:suse-module-tools-16.0.20+2.obscpio of Package suse-module-tools (Revision 9cd6c726af0725571d48678bdd86bad6)

Places